rclone(1) User Manual
Nick Craig-Wood
Jun 05, 2026

NAME

rclone - manage files on cloud storage

SYNOPSIS

    Usage:
      rclone [flags]
      rclone [command]

    Available commands:
      about       Get quota information from the remote.
      archive     Perform an action on an archive.
      authorize   Remote authorization.
      backend     Run a backend-specific command.
      bisync      Perform bidirectional synchronization between two paths.
      cat         Concatenates any files and sends them to stdout.
      check       Checks the files in the source and destination match.
      checksum    Checks the files in the destination against a SUM file.
      cleanup     Clean up the remote if possible.
      completion  Output completion script for a given shell.
      config      Enter an interactive configuration session.
      convmv      Convert file and directory names in place.
      copy        Copy files from source to dest, skipping identical files.
      copyto      Copy files from source to dest, skipping identical files.
      copyurl     Copy the contents of the URL supplied content to dest:path.
      cryptcheck  Cryptcheck checks the integrity of an encrypted remote.
      cryptdecode Cryptdecode returns unencrypted file names.
      dedupe      Interactively find duplicate filenames and delete/rename them.
      delete      Remove the files in path.
      deletefile  Remove a single file from remote.
      gendocs     Output markdown docs for rclone to the directory supplied.
      gitannex    Speaks with git-annex over stdin/stdout.
      gui         Open the web based GUI.
      hashsum     Produces a hashsum file for all the objects in the path.
      help        Show help for rclone commands, flags and backends.
      link        Generate public link to file/folder.
      listremotes List all the remotes in the config file and defined in environment variables.
      ls          List the objects in the path with size and path.
      lsd         List all directories/containers/buckets in the path.
      lsf         List directories and objects in remote:path formatted for parsing.
      lsjson      List directories and objects in the path in JSON format.
      lsl         List the objects in path with modification time, size and path.
      md5sum      Produces an md5sum file for all the objects in the path.
      mkdir       Make the path if it doesn't already exist.
      mount       Mount the remote as file system on a mountpoint.
      move        Move files from source to dest.
      moveto      Move file or directory from source to dest.
      ncdu        Explore a remote with a text based user interface.
      nfsmount    Mount the remote as file system on a mountpoint.
      obscure     Obscure password for use in the rclone config file.
      purge       Remove the path and all of its contents.
      rc          Run a command against a running rclone.
      rcat        Copies standard input to file on remote.
      rcd         Run rclone listening to remote control commands only.
      rmdir       Remove the empty directory at path.
      rmdirs      Remove empty directories under the path.
      selfupdate  Update the rclone binary.
      serve       Serve a remote over a protocol.
      settier     Changes storage class/tier of objects in remote.
      sha1sum     Produces an sha1sum file for all the objects in the path.
      size        Prints the total size and number of objects in remote:path.
      sync        Make source and dest identical, modifying destination only.
      test        Run a test command
      touch       Create new file or change file modification time.
      tree        List the contents of the remote in a tree like fashion.
      version     Show the version number.

    Use "rclone [command] --help" for more information about a command.
    Use "rclone help flags" for to see the global flags.
    Use "rclone help backends" for a list of supported services.

Rclone syncs your files to cloud storage

-   About rclone
-   What can rclone do for you?
-   What features does rclone have?
-   What providers does rclone support?
-   Download
-   Install
-   Donate.

About rclone

Rclone is a command-line program to manage files on cloud storage. It is
a feature-rich alternative to cloud vendors' web storage interfaces.
Over 70 cloud storage products support rclone including S3 object
stores, business & consumer file storage services, as well as standard
transfer protocols.

Rclone has powerful cloud equivalents to the unix commands rsync, cp,
mv, mount, ls, ncdu, tree, rm, and cat. Rclone's familiar syntax
includes shell pipeline support, and --dry-run protection. It is used at
the command line, in scripts or via its API.

Users call rclone "The Swiss army knife of cloud storage", and
"Technology indistinguishable from magic".

Rclone really looks after your data. It preserves timestamps and
verifies checksums at all times. Transfers over limited bandwidth;
intermittent connections, or subject to quota can be restarted, from the
last good file transferred. You can check the integrity of your files.
Where possible, rclone employs server-side transfers to minimise local
bandwidth use and transfers from one provider to another without using
local disk.

Virtual backends wrap local and cloud file systems to apply encryption,
compression, chunking, hashing and joining.

Rclone mounts any local, cloud or virtual filesystem as a disk on
Windows, macOS, linux and FreeBSD, and also serves these over SFTP,
HTTP, WebDAV, FTP and DLNA.

Rclone is mature, open-source software originally inspired by rsync and
written in Go. The friendly support community is familiar with varied
use cases. Official Ubuntu, Debian, Fedora, Brew and Chocolatey repos.
include rclone. For the latest version downloading from rclone.org is
recommended.

Rclone is widely used on Linux, Windows and Mac. Third-party developers
create innovative backup, restore, GUI and business process solutions
using the rclone command line or API.

Rclone does the heavy lifting of communicating with cloud storage.

What can rclone do for you?

Rclone helps you:

-   Backup (and encrypt) files to cloud storage
-   Restore (and decrypt) files from cloud storage
-   Mirror cloud data to other cloud services or locally
-   Migrate data to the cloud, or between cloud storage vendors
-   Mount multiple, encrypted, cached or diverse cloud storage as a disk
-   Analyse and account for data held on cloud storage using lsf, ljson,
    size, ncdu
-   Union file systems together to present multiple local and/or cloud
    file systems as one

Features

-   Transfers
    -   MD5, SHA1 hashes are checked at all times for file integrity
    -   Timestamps are preserved on files
    -   Operations can be restarted at any time
    -   Can be to and from network, e.g. two different cloud providers
    -   Can use multi-threaded downloads to local disk
-   Copy new or changed files to cloud storage
-   Sync (one way) to make a directory identical
-   Bisync (two way) to keep two directories in sync bidirectionally
-   Move files to cloud storage deleting the local after verification
-   Check hashes and for missing/extra files
-   Mount your cloud storage as a network disk
-   Serve local or remote files over HTTP/WebDav/FTP/SFTP/DLNA
-   Experimental Web based GUI

Supported providers

(There are many others, built on standard protocols such as WebDAV or
S3, that work out of the box.)

-   1Fichier
-   Akamai Netstorage
-   Alibaba Cloud (Aliyun) Object Storage System (OSS)
-   Amazon S3
-   Bizfly Cloud Simple Storage
-   Backblaze B2
-   Box
-   Ceph
-   China Mobile Ecloud Elastic Object Storage (EOS)
-   Arvan Cloud Object Storage (AOS)
-   Citrix ShareFile
-   Cloudflare R2
-   Cloudinary
-   Cubbit DS3
-   DigitalOcean Spaces
-   Digi Storage
-   Dreamhost
-   Drime
-   Dropbox
-   Enterprise File Fabric
-   Exaba
-   Fastly Object Storage
-   Fastmail Files
-   FileLu Cloud Storage
-   FileLu S5 (S3-Compatible Object Storage)
-   Filen
-   Files.com
-   FlashBlade
-   FTP
-   Gofile
-   Google Cloud Storage
-   Google Drive
-   Google Photos
-   HDFS
-   Hetzner Object Storage
-   Hetzner Storage Box
-   HiDrive
-   Hitachi Content Platform (HCP)
-   HTTP
-   Huawei Drive
-   Huawei OBS
-   iCloud Drive
-   ImageKit
-   Internet Archive
-   Internxt
-   Jottacloud
-   IBM COS S3
-   IDrive e2
-   Impossible Cloud
-   Intercolo Object Storage
-   IONOS Cloud
-   Koofr
-   Leviia Object Storage
-   Liara Object Storage
-   Linkbox
-   Linode Object Storage
-   Magalu
-   Mail.ru Cloud
-   Memset Memstore
-   MEGA
-   MEGA S4
-   Memory
-   Microsoft Azure Blob Storage
-   Microsoft Azure Files Storage
-   Microsoft OneDrive
-   Minio
-   Nextcloud
-   Blomp Cloud Storage
-   OpenDrive
-   OpenStack Swift
-   Oracle Cloud Storage Swift
-   Oracle Object Storage
-   Outscale
-   OVHcloud Object Storage (Swift)
-   OVHcloud Object Storage (S3-compatible)
-   ownCloud
-   pCloud
-   Petabox
-   PikPak
-   Pixeldrain
-   premiumize.me
-   put.io
-   Proton Drive
-   QingStor
-   Qiniu Cloud Object Storage (Kodo)
-   Quatrix by Maytech
-   Rabata Cloud Storage
-   RackCorp Object Storage
-   Rackspace Cloud Files
-   Rclone Serve S3
-   rsync.net
-   Scaleway
-   Seafile
-   Seagate Lyve Cloud
-   SeaweedFS
-   Selectel
-   Servercore Object Storage
-   SFTP
-   Shade
-   Sia
-   SMB / CIFS
-   Spectra Logic
-   Storj
-   Synology
-   SugarSync
-   Tencent Cloud Object Storage (COS)
-   Uloz.to
-   US3
-   Wasabi
-   WebDAV
-   Yandex Disk
-   Zadara Object Storage
-   Zoho WorkDrive
-   Zata
-   The local filesystem

Virtual providers

These backends adapt or modify other storage providers:

-   Alias: Rename existing remotes
-   Archive: Read archive files
-   Cache: Cache remotes (DEPRECATED)
-   Chunker: Split large files
-   Combine: Combine multiple remotes into a directory tree
-   Compress: Compress files
-   Crypt: Encrypt files
-   Hasher: Hash files
-   Union: Join multiple remotes to work together

Links

-   Home page
-   GitHub project page for source and bug tracker
-   Rclone Forum
-   Downloads

Install

Rclone is a Go program and comes as a single binary file.

Quickstart

-   Download the relevant binary.
-   Extract the rclone executable, rclone.exe on Windows, from the
    archive.
-   Run rclone config to setup. See rclone config docs for more details.
-   Optionally configure automatic execution.

See below for some expanded Linux / macOS / Windows instructions.

See the usage docs for how to use rclone, or run rclone -h.

Already installed rclone can be easily updated to the latest version
using the rclone selfupdate command.

See the release signing docs for how to verify signatures on the
release.

Script installation

To install rclone on Linux/macOS/BSD systems, run:

    sudo -v ; curl https://rclone.org/install.sh | sudo bash

For beta installation, run:

    sudo -v ; curl https://rclone.org/install.sh | sudo bash -s beta

Note that this script checks the version of rclone installed first and
won't re-download if not needed.

Linux installation

Precompiled binary

Fetch and unpack

    curl -O https://downloads.rclone.org/rclone-current-linux-amd64.zip
    unzip rclone-current-linux-amd64.zip
    cd rclone-*-linux-amd64

Copy binary file

    sudo cp rclone /usr/bin/
    sudo chown root:root /usr/bin/rclone
    sudo chmod 755 /usr/bin/rclone

Install manpage

    sudo mkdir -p /usr/local/share/man/man1
    sudo cp rclone.1 /usr/local/share/man/man1/
    sudo mandb

Run rclone config to setup. See rclone config docs for more details.

    rclone config

macOS installation

Installation with brew

    brew install rclone

NOTE: This version of rclone will not support mount any more (see
#5373). If mounting is wanted on macOS, either install a precompiled
binary or enable the relevant option when installing from source.

Note that this is a third party installer not controlled by the rclone
developers so it may be out of date. Its current version is as below.

[Homebrew package]

Installation with MacPorts

On macOS, rclone can also be installed via MacPorts:

    sudo port install rclone

Note that this is a third party installer not controlled by the rclone
developers so it may be out of date. Its current version is as below.

[MacPorts port]

More information on macports.org.

Precompiled binary, using curl

To avoid problems with macOS gatekeeper enforcing the binary to be
signed and notarized it is enough to download with curl.

Download the latest version of rclone.

    cd && curl -O https://downloads.rclone.org/rclone-current-osx-amd64.zip

Unzip the download and cd to the extracted folder.

    unzip -a rclone-current-osx-amd64.zip && cd rclone-*-osx-amd64

Move rclone to your $PATH. You will be prompted for your password.

    sudo mkdir -p /usr/local/bin
    sudo mv rclone /usr/local/bin/

(the mkdir command is safe to run, even if the directory already
exists).

Remove the leftover files.

    cd .. && rm -rf rclone-*-osx-amd64 rclone-current-osx-amd64.zip

Run rclone config to setup. See rclone config docs for more details.

    rclone config

Precompiled binary, using a web browser

When downloading a binary with a web browser, the browser will set the
macOS gatekeeper quarantine attribute. Starting from Catalina, when
attempting to run rclone, a pop-up will appear saying:

    "rclone" cannot be opened because the developer cannot be verified.
    macOS cannot verify that this app is free from malware.

The simplest fix is to run

    xattr -d com.apple.quarantine rclone

Windows installation

Precompiled binary

Fetch the correct binary for your processor type by clicking on these
links. If not sure, use the first link.

-   Intel/AMD - 64 Bit
-   Intel/AMD - 32 Bit
-   ARM - 64 Bit

Open this file in the Explorer and extract rclone.exe. Rclone is a
portable executable so you can place it wherever is convenient.

Open a CMD window (or powershell) and run the binary. Note that rclone
does not launch a GUI by default, it runs in the CMD Window.

-   Run rclone.exe config to setup. See rclone config docs for more
    details.
-   Optionally configure automatic execution.

If you are planning to use the rclone mount feature then you will need
to install the third party utility WinFsp also.

Windows package manager (Winget)

Winget comes pre-installed with the latest versions of Windows. If not,
update the App Installer package from the Microsoft store.

To install rclone

    winget install Rclone.Rclone

To uninstall rclone

    winget uninstall Rclone.Rclone --force

Chocolatey package manager

Make sure you have Choco installed

    choco search rclone
    choco install rclone

This will install rclone on your Windows machine. If you are planning to
use rclone mount then

    choco install winfsp

will install that too.

Note that this is a third party installer not controlled by the rclone
developers so it may be out of date. Its current version is as below.

[Chocolatey package]

Scoop package manager

Make sure you have Scoop installed

    scoop install rclone

Note that this is a third party installer not controlled by the rclone
developers so it may be out of date. Its current version is as below.

[Scoop package]

Package manager installation

Many Linux, Windows, macOS and other OS distributions package and
distribute rclone.

The distributed versions of rclone are often quite out of date and for
this reason we recommend one of the other installation methods if
possible.

You can get an idea of how up to date or not your OS distribution's
package is here.

[Packaging status]

Docker installation

The rclone developers maintain a docker image for rclone.

Note: We also now offer a paid version of rclone with enterprise-grade
security and zero CVEs through our partner SecureBuild. If you are
interested, check out their website and the Rclone SecureBuild Image.

These images are built as part of the release process based on a minimal
Alpine Linux.

The :latest tag will always point to the latest stable release. You can
use the :beta tag to get the latest build from master. You can also use
version tags, e.g. :1.49.1, :1.49 or :1.

    $ docker pull rclone/rclone:latest
    latest: Pulling from rclone/rclone
    Digest: sha256:0e0ced72671989bb837fea8e88578b3fc48371aa45d209663683e24cfdaa0e11
    ...
    $ docker run --rm rclone/rclone:latest version
    rclone v1.49.1
    - os/arch: linux/amd64
    - go version: go1.12.9

There are a few command line options to consider when starting an rclone
Docker container from the rclone image.

-   You need to mount the host rclone config dir at /config/rclone into
    the Docker container. Due to the fact that rclone updates tokens
    inside its config file, and that the update process involves a file
    rename, you need to mount the whole host rclone config dir, not just
    the single host rclone config file.

-   You need to mount a host data dir at /data into the Docker
    container.

-   By default, the rclone binary inside a Docker container runs with
    UID=0 (root). As a result, all files created in a run will have
    UID=0. If your config and data files reside on the host with a
    non-root UID:GID, you need to pass these on the container start
    command line.

-   If you want to access the RC interface (either via the API or the
    Web UI), it is required to set the --rc-addr to :5572 in order to
    connect to it from outside the container. An explanation about why
    this is necessary can be found in an old pythonspeed.com article.

    -   NOTE: Users running this container with the docker network set
        to host should probably set it to listen to localhost only, with
        127.0.0.1:5572 as the value for --rc-addr

-   It is possible to use rclone mount inside a userspace Docker
    container, and expose the resulting fuse mount to the host. The
    exact docker run options to do that might vary slightly between
    hosts. See, e.g. the discussion in this thread.

    You also need to mount the host /etc/passwd and /etc/group for fuse
    to work inside the container.

Here are some commands tested on an Ubuntu 18.04.3 host:

    # config on host at ~/.config/rclone/rclone.conf
    # data on host at ~/data

    # add a remote interactively
    docker run --rm -it \
        --volume ~/.config/rclone:/config/rclone \
        --user $(id -u):$(id -g) \
        rclone/rclone \
        config

    # make sure the config is ok by listing the remotes
    docker run --rm \
        --volume ~/.config/rclone:/config/rclone \
        --user $(id -u):$(id -g) \
        rclone/rclone \
        listremotes

    # perform mount inside Docker container, expose result to host
    mkdir -p ~/data/mount
    docker run --rm \
        --volume ~/.config/rclone:/config/rclone \
        --volume ~/data:/data:shared \
        --user $(id -u):$(id -g) \
        --volume /etc/passwd:/etc/passwd:ro --volume /etc/group:/etc/group:ro \
        --device /dev/fuse --cap-add SYS_ADMIN --security-opt apparmor:unconfined \
        rclone/rclone \
        mount dropbox:Photos /data/mount &
    ls ~/data/mount
    kill %1

Snap installation

[Get it from the Snap Store]

Make sure you have Snapd installed

    sudo snap install rclone

Due to the strict confinement of Snap, rclone snap cannot access real
/home/$USER/.config/rclone directory, default config path is as below.

-   Default config directory:
    -   /home/$USER/snap/rclone/current/.config/rclone

Note: Due to the strict confinement of Snap, rclone mount feature is not
supported.

If mounting is wanted, either install a precompiled binary or enable the
relevant option when installing from source.

Note that this is controlled by community maintainer not the rclone
developers so it may be out of date. Its current version is as below.

[rclone]

Source installation

Make sure you have git and Go installed. Go version 1.25 or newer is
required, the latest release is recommended. You can get it from your
package manager, or download it from golang.org/dl. Then you can run the
following:

    git clone https://github.com/rclone/rclone.git
    cd rclone
    go build

This will check out the rclone source in subfolder rclone, which you can
later modify and send pull requests with. Then it will build the rclone
executable in the same folder. As an initial check you can now run
./rclone version (.\rclone version on Windows).

Note that on macOS and Windows the mount command will not be available
unless you specify an additional build tag cmount.

    go build -tags cmount

This assumes you have a GCC compatible C compiler (GCC or Clang) in your
PATH, as it uses cgo. But on Windows, the cgofuse library that the
cmount implementation is based on, also supports building without cgo,
i.e. by setting environment variable CGO_ENABLED to value 0 (static
linking). This is how the official Windows release of rclone is being
built, starting with version 1.59. It is still possible to build with
cgo on Windows as well, by using the MinGW port of GCC, e.g. by
installing it in a MSYS2 distribution (make sure you install it in the
classic mingw64 subsystem, the ucrt64 version is not compatible).

Additionally, to build with mount on Windows, you must install the third
party utility WinFsp, with the "Developer" feature selected. If building
with cgo, you must also set environment variable CPATH pointing to the
fuse include directory within the WinFsp installation (normally
C:\Program Files (x86)\WinFsp\inc\fuse).

You may add arguments -ldflags -s to omit symbol table and debug
information, making the executable file smaller, and -trimpath to remove
references to local file system paths. The official rclone releases are
built with both of these.

    go build -trimpath -ldflags -s -tags cmount

If you want to customize the version string, as reported by the
rclone version command, you can set one of the variables fs.Version,
fs.VersionTag (to keep default suffix but customize the number), or
fs.VersionSuffix (to keep default number but customize the suffix). This
can be done from the build command, by adding to the -ldflags argument
value as shown below.

    go build -trimpath -ldflags "-s -X github.com/rclone/rclone/fs.Version=v9.9.9-test" -tags cmount

On Windows, the official executables also have the version information,
as well as a file icon, embedded as binary resources. To get that with
your own build you need to run the following command before the build
command. It generates a Windows resource system object file, with
extension .syso, e.g. resource_windows_amd64.syso, that will be
automatically picked up by future build commands.

    go run bin/resource_windows.go

The above command will generate a resource file containing version
information based on the fs.Version variable in source at the time you
run the command, which means if the value of this variable changes you
need to re-run the command for it to be reflected in the version
information. Also, if you override this version variable in the build
command as described above, you need to do that also when generating the
resource file, or else it will still use the value from the source.

    go run bin/resource_windows.go -version v9.9.9-test

Instead of executing the go build command directly, you can run it via
the Makefile. The default target changes the version suffix from "-DEV"
to "-beta" followed by additional commit details, embeds version
information binary resources on Windows, and copies the resulting rclone
executable into your GOPATH bin folder ($(go env GOPATH)/bin, which
corresponds to ~/go/bin/rclone by default).

    make

To include mount command on macOS and Windows with Makefile build:

    make GOTAGS=cmount

There are other make targets that can be used for more advanced builds,
such as cross-compiling for all supported os/architectures, and
packaging results into release artifacts. See Makefile and
cross-compile.go for details.

Another alternative method for source installation is to download the
source, build and install rclone - all in one operation, as a regular Go
package. The source will be stored it in the Go module cache, and the
resulting executable will be in your GOPATH bin folder
($(go env GOPATH)/bin, which corresponds to ~/go/bin/rclone by default).

    go install github.com/rclone/rclone@latest

In some situations, rclone executable size might be too big for
deployment in very restricted environments when all backends with large
SDKs are included. To limit binary size unused backends can be commented
out in backends/all/all.go and unused commands in cmd/all/all.go before
building with go build or make

Ansible installation

This can be done with Stefan Weichinger's ansible role.

Instructions

1.  git clone https://github.com/stefangweichinger/ansible-rclone.git
    into your local roles-directory

2.  add the role to the hosts you want rclone installed to:

        - hosts: rclone-hosts
          roles:
            - rclone

Portable installation

As mentioned above, rclone is single executable (rclone, or rclone.exe
on Windows) that you can download as a zip archive and extract into a
location of your choosing. When executing different commands, it may
create files in different locations, such as a configuration file and
various temporary files. By default the locations for these are
according to your operating system, e.g. configuration file in your user
profile directory and temporary files in the standard temporary
directory, but you can customize all of them, e.g. to make a completely
self-contained, portable installation.

Run the config paths command to see the locations that rclone will use.

To override them set the corresponding options (as command-line
arguments, or as environment variables):

-   --config
-   --cache-dir
-   --temp-dir

Autostart

After installing and configuring rclone, as described above, you are
ready to use rclone as an interactive command line utility. If your goal
is to perform periodic operations, such as a regular sync, you will
probably want to configure your rclone command in your operating
system's scheduler. If you need to expose service-like features, such as
remote control, GUI, serve or mount, you will often want an rclone
command always running in the background, and configuring it to run in a
service infrastructure may be a better option. Below are some
alternatives on how to achieve this on different operating systems.

NOTE: Before setting up autorun it is highly recommended that you have
tested your command manually from a Command Prompt first.

Autostart on Windows

The most relevant alternatives for autostart on Windows are:

-   Run at user log on using the Startup folder
-   Run at user log on, at system startup or at schedule using Task
    Scheduler
-   Run at system startup using Windows service

Running in background

Rclone is a console application, so if not starting from an existing
Command Prompt, e.g. when starting rclone.exe from a shortcut, it will
open a Command Prompt window. When configuring rclone to run from task
scheduler and windows service you are able to set it to run hidden in
background. From rclone version 1.54 you can also make it run hidden
from anywhere by adding option --no-console (it may still flash briefly
when the program starts). Since rclone normally writes information and
any error messages to the console, you must redirect this to a file to
be able to see it. Rclone has a built-in option --log-file for that.

Example command to run a sync in background:

    c:\rclone\rclone.exe sync c:\files remote:/files --no-console --log-file c:\rclone\logs\sync_files.txt

User account

As mentioned in the mount documentation, mounted drives created as
Administrator are not visible to other accounts, not even the account
that was elevated as Administrator. By running the mount command as the
built-in SYSTEM user account, it will create drives accessible for
everyone on the system. Both scheduled task and Windows service can be
used to achieve this.

NOTE: Remember that when rclone runs as the SYSTEM user, the user
profile that it sees will not be yours. This means that if you normally
run rclone with configuration file in the default location, to be able
to use the same configuration when running as the system user you must
explicitly tell rclone where to find it with the --config option, or
else it will look in the system users profile path
(C:\Windows\System32\config\systemprofile). To test your command
manually from a Command Prompt, you can run it with the PsExec utility
from Microsoft's Sysinternals suite, which takes option -s to execute
commands as the SYSTEM user.

Start from Startup folder

To quickly execute an rclone command you can simply create a standard
Windows Explorer shortcut for the complete rclone command you want to
run. If you store this shortcut in the special "Startup" start-menu
folder, Windows will automatically run it at login. To open this folder
in Windows Explorer, enter path
%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup, or
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp if you want
the command to start for every user that logs in.

This is the easiest approach to autostarting of rclone, but it offers no
functionality to set it to run as different user, or to set conditions
or actions on certain events. Setting up a scheduled task as described
below will often give you better results.

Start from Task Scheduler

Task Scheduler is an administrative tool built into Windows, and it can
be used to configure rclone to be started automatically in a highly
configurable way, e.g. periodically on a schedule, on user log on, or at
system startup. It can run be configured to run as the current user, or
for a mount command that needs to be available to all users it can run
as the SYSTEM user. For technical information, see Task Scheduler for
developers.

Run as service

For running rclone at system startup, you can create a Windows service
that executes your rclone command, as an alternative to scheduled task
configured to run at startup.

Mount command built-in service integration

For mount commands, rclone has a built-in Windows service integration
via the third-party WinFsp library it uses. Registering as a regular
Windows service easy, as you just have to execute the built-in
PowerShell command New-Service (requires administrative privileges).

Example of a PowerShell command that creates a Windows service for
mounting some remote:/files as drive letter X:, for all users (service
will be running as the local system account):

    New-Service -Name Rclone -BinaryPathName 'c:\rclone\rclone.exe mount remote:/files X: --config c:\rclone\config\rclone.conf --log-file c:\rclone\logs\mount.txt'

The WinFsp service infrastructure supports incorporating services for
file system implementations, such as rclone, into its own launcher
service, as kind of "child services". This has the additional advantage
that it also implements a network provider that integrates into Windows
standard methods for managing network drives. This is currently not
officially supported by Rclone, but with WinFsp version 2019.3 B2 /
v1.5B2 or later it should be possible through path rewriting as
described in #3340.

Third-party service integration

To Windows service running any rclone command, the excellent third-party
utility NSSM, the "Non-Sucking Service Manager", can be used. It
includes some advanced features such as adjusting process priority,
defining process environment variables, redirect to file anything
written to stdout, and customized response to different exit codes, with
a GUI to configure everything from (although it can also be used from
command line ).

There are also several other alternatives. To mention one more, WinSW,
"Windows Service Wrapper", is worth checking out. It requires .NET
Framework, but it is preinstalled on newer versions of Windows, and it
also provides alternative standalone distributions which includes
necessary runtime (.NET 5). WinSW is a command-line only utility, where
you have to manually create an XML file with service configuration. This
may be a drawback for some, but it can also be an advantage as it is
easy to back up and reuse the configuration settings, without having go
through manual steps in a GUI. One thing to note is that by default it
does not restart the service on error, one have to explicit enable this
in the configuration file (via the "onfailure" parameter).

Autostart on Linux

Start as a service

To always run rclone in background, relevant for mount commands etc, you
can use systemd to set up rclone as a system or user service. Running as
a system service ensures that it is run at startup even if the user it
is running as has no active session. Running rclone as a user service
ensures that it only starts after the configured user has logged into
the system.

Run periodically from cron

To run a periodic command, such as a copy/sync, you can set up a cron
job.

Usage

Rclone is a command line program to manage files on cloud storage. After
download and install, continue here to learn how to use it: Initial
configuration, what the basic syntax looks like, describes the various
subcommands, the various options, and more.

Configure

First, you'll need to configure rclone. As the object storage systems
have quite complicated authentication these are kept in a config file.
(See the --config entry for how to find the config file and choose its
location.)

The easiest way to make the config is to run rclone with the config
option:

    rclone config

See the following for detailed instructions for

-   1Fichier
-   Akamai Netstorage
-   Alias
-   Archive
-   Amazon S3
-   Backblaze B2
-   Box
-   Chunker - transparently splits large files for other remotes
-   Citrix ShareFile
-   Compress
-   Cloudinary
-   Combine
-   Crypt - to encrypt other remotes
-   DigitalOcean Spaces
-   Digi Storage
-   Drime
-   Dropbox
-   Enterprise File Fabric
-   FileLu Cloud Storage
-   Filen
-   Files.com
-   FTP
-   Gofile
-   Google Cloud Storage
-   Google Drive
-   Google Photos
-   Hasher - to handle checksums for other remotes
-   HDFS
-   Hetzner Storage Box
-   HiDrive
-   HTTP
-   Huawei Drive
-   iCloud Drive
-   Internet Archive
-   Internxt
-   Jottacloud
-   Koofr
-   Linkbox
-   Mail.ru Cloud
-   Mega
-   Memory
-   Microsoft Azure Blob Storage
-   Microsoft Azure Files Storage
-   Microsoft OneDrive
-   OpenStack Swift / Rackspace Cloudfiles / Blomp Cloud Storage /
    Memset Memstore
-   OpenDrive
-   Oracle Object Storage
-   Pcloud
-   PikPak
-   Pixeldrain
-   premiumize.me
-   put.io
-   Proton Drive
-   QingStor
-   Quatrix by Maytech
-   rsync.net
-   Seafile
-   SFTP
-   Shade
-   Sia
-   SMB
-   Storj
-   SugarSync
-   Union
-   Uloz.to
-   WebDAV
-   Yandex Disk
-   Zoho WorkDrive
-   The local filesystem

Basic syntax

Rclone syncs a directory tree from one storage system to another.

Its syntax is like this

    rclone subcommand [options] <parameters> <parameters...>

A subcommand is an rclone operation required (e.g. sync, copy, ls).

An option is a single letter flag (e.g. -v) or a group of single letter
flags (e.g. -Pv) or a long flag (e.g. --progress). No options are
required. Options can come after the subcommand or in between parameters
too or on the end, but only global options can be used before the
subcommand. Anything after a -- option will not be interpreted as an
option so if you need to add a parameter which starts with a - then put
a -- on its own first, eg

    rclone lsf -- -directory-starting-with-dash

A parameter is usually a file path or rclone remote, eg /path/to/file or
remote:path/to/file but it can be other things - the subcommand help
will tell you what.

Source and destination paths are specified by the name you gave the
storage system in the config file then the sub path, e.g.
"drive:myfolder" to look at "myfolder" in Google drive.

You can define as many storage paths as you like in the config file.

Please use the --interactive/-i flag while learning rclone to avoid
accidental data loss.

Subcommands

rclone uses a system of subcommands. For example

    rclone ls remote:path # lists a remote
    rclone copy /local/path remote:path # copies /local/path to the remote
    rclone sync --interactive /local/path remote:path # syncs /local/path to the remote

rclone config

Enter an interactive configuration session.

Synopsis

Enter an interactive configuration session where you can setup new
remotes and manage existing ones. You may also set or remove a password
to protect your configuration.

    rclone config [flags]

Options

      -h, --help   help for config

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.
-   rclone config create - Create a new remote with name, type and
    options.
-   rclone config delete - Delete an existing remote.
-   rclone config disconnect - Disconnects user from remote
-   rclone config dump - Dump the config file as JSON.
-   rclone config edit - Enter an interactive configuration session.
-   rclone config encryption - set, remove and check the encryption for
    the config file
-   rclone config file - Show path of configuration file in use.
-   rclone config password - Update password in an existing remote.
-   rclone config paths - Show paths used for configuration, cache, temp
    etc.
-   rclone config providers - List in JSON format all the providers and
    options.
-   rclone config reconnect - Re-authenticates user with remote.
-   rclone config redacted - Print redacted (decrypted) config file, or
    the redacted config for a single remote.
-   rclone config show - Print (decrypted) config file, or the config
    for a single remote.
-   rclone config string - Print connection string for a single remote.
-   rclone config touch - Ensure configuration file exists.
-   rclone config update - Update options in an existing remote.
-   rclone config userinfo - Prints info about logged in user of remote.

rclone copy

Copy files from source to dest, skipping identical files.

Synopsis

Copy the source to the destination. Does not transfer files that are
identical on source and destination, testing by size and modification
time or MD5SUM. Doesn't delete files from the destination. If you want
to also delete files from destination, to make it match source, use the
sync command instead.

Note that it is always the contents of the directory that is synced, not
the directory itself. So when source:path is a directory, it's the
contents of source:path that are copied, not the directory name and
contents.

To copy single files, use the copyto command instead.

If dest:path doesn't exist, it is created and the source:path contents
go there.

For example

    rclone copy source:sourcepath dest:destpath

Let's say there are two files in sourcepath

    sourcepath/one.txt
    sourcepath/two.txt

This copies them to

    destpath/one.txt
    destpath/two.txt

Not to

    destpath/sourcepath/one.txt
    destpath/sourcepath/two.txt

If you are familiar with rsync, rclone always works as if you had
written a trailing / - meaning "copy the contents of this directory".
This applies to all commands and whether you are talking about the
source or destination.

See the --no-traverse option for controlling whether rclone lists the
destination directory or not. Supplying this option when copying a small
number of files into a large destination can speed transfers up greatly.

For example, if you have many files in /path/to/src but only a few of
them change every day, you can copy all the files which have changed
recently very efficiently like this:

    rclone copy --max-age 24h --no-traverse /path/to/src remote:

Rclone will sync the modification times of files and directories if the
backend supports it. If metadata syncing is required then use the
--metadata flag.

Note that the modification time and metadata for the root directory will
not be synced. See issue #7652 for more info.

Note: Use the -P/--progress flag to view real-time transfer statistics.

Note: Use the --dry-run or the --interactive/-i flag to test without
copying anything.

Logger Flags

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The --dest-after flag writes a list file using the same format flags as
lsf (including customizable options for hash, modtime, etc.)
Conceptually it is similar to rsync's --itemize-changes, but not
identical -- it should output an accurate list of what will be on the
destination after the command is finished.

When the --no-traverse flag is set, all logs involving files that exist
only on the destination will be incomplete or completely missing.

Note that these logger flags have a few limitations, and certain
scenarios are not currently supported:

-   --max-duration / CutoffModeHard
-   --compare-dest / --copy-dest
-   server-side moves of an entire dir at once
-   High-level retries, because there would be duplicates (use
    --retries 1 to disable)
-   Possibly some unusual error scenarios

Note also that each file is logged during execution, as opposed to
after, so it is most useful as a predictor of what SHOULD happen to each
file (which may or may not match what actually DID).

    rclone copy source:path dest:path [flags]

Options

          --absolute                Put a leading / in front of path names
          --combined string         Make a combined report of changes to this file
          --create-empty-src-dirs   Create empty source dirs on destination after copy
          --csv                     Output in CSV format
          --dest-after string       Report all files that exist on the dest post-sync
          --differ string           Report all non-matching files to this file
      -d, --dir-slash               Append a slash to directory names (default true)
          --dirs-only               Only list directories
          --error string            Report all files with errors (hashing or reading) to this file
          --files-only              Only list files (default true)
      -F, --format string           Output format - see lsf help for details (default "p")
          --hash h                  Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "md5")
      -h, --help                    help for copy
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
      -s, --separator string        Separator for the items in the format (default ";")
      -t, --timeformat string       Specify a custom time format - see docs for details (default: 2006-01-02 15:04:05)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Copy Options

Flags for anything which can copy a file

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone sync

Make source and dest identical, modifying destination only.

Synopsis

Sync the source to the destination, changing the destination only.
Doesn't transfer files that are identical on source and destination,
testing by size and modification time or MD5SUM. Destination is updated
to match source, including deleting files if necessary (except duplicate
objects, see below). If you don't want to delete files from destination,
use the copy command instead.

Important: Since this can cause data loss, test first with the --dry-run
or the --interactive/i flag.

    rclone sync --interactive SOURCE remote:DESTINATION

Files in the destination won't be deleted if there were any errors at
any point. Duplicate objects (files with the same name, on those
providers that support it) are not yet handled. Files that are excluded
won't be deleted unless --delete-excluded is used. Symlinks won't be
transferred or deleted from local file systems unless --links is used.

It is always the contents of the directory that is synced, not the
directory itself. So when source:path is a directory, it's the contents
of source:path that are copied, not the directory name and contents. See
extended explanation in the copy command if unsure.

If dest:path doesn't exist, it is created and the source:path contents
go there.

It is not possible to sync overlapping remotes. However, you may exclude
the destination from the sync with a filter rule or by putting an
exclude-if-present file inside the destination directory and sync to a
destination that is inside the source directory.

Rclone will sync the modification times of files and directories if the
backend supports it. If metadata syncing is required then use the
--metadata flag.

Note that the modification time and metadata for the root directory will
not be synced. See https://github.com/rclone/rclone/issues/7652 for more
info.

Note: Use the -P/--progress flag to view real-time transfer statistics

Note: Use the rclone dedupe command to deal with "Duplicate
object/directory found in source/destination - ignoring" errors. See
this forum post for more info.

Logger Flags

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The --dest-after flag writes a list file using the same format flags as
lsf (including customizable options for hash, modtime, etc.)
Conceptually it is similar to rsync's --itemize-changes, but not
identical -- it should output an accurate list of what will be on the
destination after the command is finished.

When the --no-traverse flag is set, all logs involving files that exist
only on the destination will be incomplete or completely missing.

Note that these logger flags have a few limitations, and certain
scenarios are not currently supported:

-   --max-duration / CutoffModeHard
-   --compare-dest / --copy-dest
-   server-side moves of an entire dir at once
-   High-level retries, because there would be duplicates (use
    --retries 1 to disable)
-   Possibly some unusual error scenarios

Note also that each file is logged during execution, as opposed to
after, so it is most useful as a predictor of what SHOULD happen to each
file (which may or may not match what actually DID).

    rclone sync source:path dest:path [flags]

Options

          --absolute                Put a leading / in front of path names
          --combined string         Make a combined report of changes to this file
          --create-empty-src-dirs   Create empty source dirs on destination after sync
          --csv                     Output in CSV format
          --dest-after string       Report all files that exist on the dest post-sync
          --differ string           Report all non-matching files to this file
      -d, --dir-slash               Append a slash to directory names (default true)
          --dirs-only               Only list directories
          --error string            Report all files with errors (hashing or reading) to this file
          --files-only              Only list files (default true)
      -F, --format string           Output format - see lsf help for details (default "p")
          --hash h                  Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "md5")
      -h, --help                    help for sync
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
      -s, --separator string        Separator for the items in the format (default ";")
      -t, --timeformat string       Specify a custom time format - see docs for details (default: 2006-01-02 15:04:05)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Copy Options

Flags for anything which can copy a file

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Sync Options

Flags used for sync commands

          --backup-dir string               Make backups into hierarchy based in DIR
          --delete-after                    When synchronizing, delete files on destination after transferring (default)
          --delete-before                   When synchronizing, delete files on destination before transferring
          --delete-during                   When synchronizing, delete files during transfer
          --fix-case                        Force rename of case insensitive dest to match source
          --ignore-errors                   Delete even if there are I/O errors
          --list-cutoff int                 To save memory, sort directory listings on disk above this threshold (default 1000000)
          --max-delete int                  When synchronizing, limit the number of deletes (default -1)
          --max-delete-size SizeSuffix      When synchronizing, limit the total size of deletes (default off)
          --suffix string                   Suffix to add to changed files
          --suffix-keep-extension           Preserve the extension when using --suffix
          --track-renames                   When synchronizing, track file renames and do a server-side move if possible
          --track-renames-strategy string   Strategies to use when synchronizing using track-renames hash|modtime|leaf (default "hash")

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone move

Move files from source to dest.

Synopsis

Moves the contents of the source directory to the destination directory.
Rclone will error if the source and destination overlap and the remote
does not support a server-side directory move operation.

To move single files, use the moveto command instead.

If no filters are in use and if possible this will server-side move
source:path into dest:path. After this source:path will no longer exist.

Otherwise for each file in source:path selected by the filters (if any)
this will move it into dest:path. If possible a server-side move will be
used, otherwise it will copy it (server-side if possible) into dest:path
then delete the original (if no errors on copy) in source:path.

If you want to delete empty source directories after move, use the
--delete-empty-src-dirs flag.

See the --no-traverse option for controlling whether rclone lists the
destination directory or not. Supplying this option when moving a small
number of files into a large destination can speed transfers up greatly.

Rclone will sync the modification times of files and directories if the
backend supports it. If metadata syncing is required then use the
--metadata flag.

Note that the modification time and metadata for the root directory will
not be synced. See https://github.com/rclone/rclone/issues/7652 for more
info.

Important: Since this can cause data loss, test first with the --dry-run
or the --interactive/-i flag.

Note: Use the -P/--progress flag to view real-time transfer statistics.

Logger Flags

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The --dest-after flag writes a list file using the same format flags as
lsf (including customizable options for hash, modtime, etc.)
Conceptually it is similar to rsync's --itemize-changes, but not
identical -- it should output an accurate list of what will be on the
destination after the command is finished.

When the --no-traverse flag is set, all logs involving files that exist
only on the destination will be incomplete or completely missing.

Note that these logger flags have a few limitations, and certain
scenarios are not currently supported:

-   --max-duration / CutoffModeHard
-   --compare-dest / --copy-dest
-   server-side moves of an entire dir at once
-   High-level retries, because there would be duplicates (use
    --retries 1 to disable)
-   Possibly some unusual error scenarios

Note also that each file is logged during execution, as opposed to
after, so it is most useful as a predictor of what SHOULD happen to each
file (which may or may not match what actually DID).

    rclone move source:path dest:path [flags]

Options

          --absolute                Put a leading / in front of path names
          --combined string         Make a combined report of changes to this file
          --create-empty-src-dirs   Create empty source dirs on destination after move
          --csv                     Output in CSV format
          --delete-empty-src-dirs   Delete empty source dirs after move
          --dest-after string       Report all files that exist on the dest post-sync
          --differ string           Report all non-matching files to this file
      -d, --dir-slash               Append a slash to directory names (default true)
          --dirs-only               Only list directories
          --error string            Report all files with errors (hashing or reading) to this file
          --files-only              Only list files (default true)
      -F, --format string           Output format - see lsf help for details (default "p")
          --hash h                  Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "md5")
      -h, --help                    help for move
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
      -s, --separator string        Separator for the items in the format (default ";")
      -t, --timeformat string       Specify a custom time format - see docs for details (default: 2006-01-02 15:04:05)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Copy Options

Flags for anything which can copy a file

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone delete

Remove the files in path.

Synopsis

Remove the files in path. Unlike purge it obeys include/exclude filters
so can be used to selectively delete files.

rclone delete only deletes files but leaves the directory structure
alone. If you want to delete a directory and all of its contents use the
purge command.

If you supply the --rmdirs flag, it will remove all empty directories
along with it. You can also use the separate command rmdir or rmdirs to
delete empty directories only.

For example, to delete all files bigger than 100 MiB, you may first want
to check what would be deleted (use either):

    rclone --min-size 100M lsl remote:path
    rclone --dry-run --min-size 100M delete remote:path

Then proceed with the actual delete:

    rclone --min-size 100M delete remote:path

That reads "delete everything with a minimum size of 100 MiB", hence
delete all files bigger than 100 MiB.

Important: Since this can cause data loss, test first with the --dry-run
or the --interactive/-i flag.

    rclone delete remote:path [flags]

Options

      -h, --help     help for delete
          --rmdirs   rmdirs removes empty directories but leaves root intact

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone purge

Remove the path and all of its contents.

Synopsis

Remove the path and all of its contents. Note that this does not obey
include/exclude filters - everything will be removed. Use the delete
command if you want to selectively delete files. To delete empty
directories only, use command rmdir or rmdirs.

The concurrency of this operation is controlled by the --checkers global
flag. However, some backends will implement this command directly, in
which case --checkers will be ignored.

Important: Since this can cause data loss, test first with the --dry-run
or the --interactive/-i flag.

    rclone purge remote:path [flags]

Options

      -h, --help   help for purge

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone mkdir

Make the path if it doesn't already exist.

    rclone mkdir remote:path [flags]

Options

      -h, --help   help for mkdir

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone rmdir

Remove the empty directory at path.

Synopsis

This removes empty directory given by path. Will not remove the path if
it has any objects in it, not even empty subdirectories. Use command
rmdirs (or delete with option --rmdirs) to do that.

To delete a path and any objects in it, use purge command.

    rclone rmdir remote:path [flags]

Options

      -h, --help   help for rmdir

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone check

Checks the files in the source and destination match.

Synopsis

Checks the files in the source and destination match. It compares sizes
and hashes (MD5 or SHA1) and logs a report of files that don't match. It
doesn't alter the source or destination.

For the crypt remote there is a dedicated command, cryptcheck, that are
able to check the checksums of the encrypted files.

If you supply the --size-only flag, it will only compare the sizes not
the hashes as well. Use this for a quick check.

If you supply the --download flag, it will download the data from both
remotes and check them against each other on the fly. This can be useful
for remotes that don't support hashes or if you really want to check all
the data.

If you supply the --checkfile HASH flag with a valid hash name, the
source:path must point to a text file in the SUM format.

If you supply the --one-way flag, it will only check that files in the
source match the files in the destination, not the other way around.
This means that extra files in the destination that are not in the
source will not be detected.

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The default number of parallel checks is 8. See the --checkers option
for more information.

    rclone check source:path dest:path [flags]

Options

      -C, --checkfile string        Treat source:path as a SUM file with hashes of given type
          --combined string         Make a combined report of changes to this file
          --differ string           Report all non-matching files to this file
          --download                Check by downloading rather than with hash
          --error string            Report all files with errors (hashing or reading) to this file
      -h, --help                    help for check
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
          --one-way                 Check one way only, source files must exist on remote

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Check Options

Flags used for check commands

          --max-backlog int   Maximum number of objects in sync or check backlog (default 10000)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone ls

List the objects in the path with size and path.

Synopsis

Lists the objects in the source path to standard output in a human
readable format with size and path. Recurses by default.

E.g.

    $ rclone ls swift:bucket
        60295 bevajer5jef
        90613 canole
        94467 diwogej7
        37600 fubuwic

Any of the filtering options can be applied to this command.

There are several related list commands

-   ls to list size and path of objects only
-   lsl to list modification time, size and path of objects only
-   lsd to list directories only
-   lsf to list objects and directories in easy to parse format
-   lsjson to list objects and directories in JSON format

ls,lsl,lsd are designed to be human-readable. lsf is designed to be
human and machine-readable. lsjson is designed to be machine-readable.

Note that ls and lsl recurse by default - use --max-depth 1 to stop the
recursion.

The other list commands lsd,lsf,lsjson do not recurse by default - use
-R to make them recurse.

List commands prefer a recursive method that uses more memory but fewer
transactions by default. Use --disable ListR to suppress the behavior.
See --fast-list for more details.

Listing a nonexistent directory will produce an error except for remotes
which can't have empty directories (e.g. s3, swift, or gcs - the
bucket-based remotes).

    rclone ls remote:path [flags]

Options

      -h, --help   help for ls

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone lsd

List all directories/containers/buckets in the path.

Synopsis

Lists the directories in the source path to standard output. Does not
recurse by default. Use the -R flag to recurse.

This command lists the total size of the directory (if known, -1 if
not), the modification time (if known, the current time if not), the
number of objects in the directory (if known, -1 if not) and the name of
the directory, E.g.

    $ rclone lsd swift:
          494000 2018-04-26 08:43:20     10000 10000files
              65 2018-04-26 08:43:20         1 1File

Or

    $ rclone lsd drive:test
              -1 2016-10-17 17:41:53        -1 1000files
              -1 2017-01-03 14:40:54        -1 2500files
              -1 2017-07-08 14:39:28        -1 4000files

If you just want the directory names use rclone lsf --dirs-only.

Any of the filtering options can be applied to this command.

There are several related list commands

-   ls to list size and path of objects only
-   lsl to list modification time, size and path of objects only
-   lsd to list directories only
-   lsf to list objects and directories in easy to parse format
-   lsjson to list objects and directories in JSON format

ls,lsl,lsd are designed to be human-readable. lsf is designed to be
human and machine-readable. lsjson is designed to be machine-readable.

Note that ls and lsl recurse by default - use --max-depth 1 to stop the
recursion.

The other list commands lsd,lsf,lsjson do not recurse by default - use
-R to make them recurse.

List commands prefer a recursive method that uses more memory but fewer
transactions by default. Use --disable ListR to suppress the behavior.
See --fast-list for more details.

Listing a nonexistent directory will produce an error except for remotes
which can't have empty directories (e.g. s3, swift, or gcs - the
bucket-based remotes).

    rclone lsd remote:path [flags]

Options

      -h, --help        help for lsd
      -R, --recursive   Recurse into the listing

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone lsl

List the objects in path with modification time, size and path.

Synopsis

Lists the objects in the source path to standard output in a human
readable format with modification time, size and path. Recurses by
default.

E.g.

    $ rclone lsl swift:bucket
        60295 2016-06-25 18:55:41.062626927 bevajer5jef
        90613 2016-06-25 18:55:43.302607074 canole
        94467 2016-06-25 18:55:43.046609333 diwogej7
        37600 2016-06-25 18:55:40.814629136 fubuwic

Any of the filtering options can be applied to this command.

There are several related list commands

-   ls to list size and path of objects only
-   lsl to list modification time, size and path of objects only
-   lsd to list directories only
-   lsf to list objects and directories in easy to parse format
-   lsjson to list objects and directories in JSON format

ls,lsl,lsd are designed to be human-readable. lsf is designed to be
human and machine-readable. lsjson is designed to be machine-readable.

Note that ls and lsl recurse by default - use --max-depth 1 to stop the
recursion.

The other list commands lsd,lsf,lsjson do not recurse by default - use
-R to make them recurse.

List commands prefer a recursive method that uses more memory but fewer
transactions by default. Use --disable ListR to suppress the behavior.
See --fast-list for more details.

Listing a nonexistent directory will produce an error except for remotes
which can't have empty directories (e.g. s3, swift, or gcs - the
bucket-based remotes).

    rclone lsl remote:path [flags]

Options

      -h, --help   help for lsl

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone md5sum

Produces an md5sum file for all the objects in the path.

Synopsis

Produces an md5sum file for all the objects in the path. This is in the
same format as the standard md5sum tool produces.

By default, the hash is requested from the remote. If MD5 is not
supported by the remote, no hash will be returned. With the download
flag, the file will be downloaded from the remote and hashed locally
enabling MD5 for any remote.

For other algorithms, see the hashsum command. Running
rclone md5sum remote:path is equivalent to running
rclone hashsum MD5 remote:path.

This command can also hash data received on standard input (stdin), by
not passing a remote:path, or by passing a hyphen as remote:path when
there is data to read (if not, the hyphen will be treated literally, as
a relative path).

    rclone md5sum remote:path [flags]

Options

          --base64               Output base64 encoded hashsum
      -C, --checkfile string     Validate hashes against a given SUM file instead of printing them
          --download             Download the file and hash it locally; if this flag is not specified, the hash is requested from the remote
      -h, --help                 help for md5sum
          --output-file string   Output hashsums to a file rather than the terminal

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone sha1sum

Produces an sha1sum file for all the objects in the path.

Synopsis

Produces an sha1sum file for all the objects in the path. This is in the
same format as the standard sha1sum tool produces.

By default, the hash is requested from the remote. If SHA-1 is not
supported by the remote, no hash will be returned. With the download
flag, the file will be downloaded from the remote and hashed locally
enabling SHA-1 for any remote.

For other algorithms, see the hashsum command. Running
rclone sha1sum remote:path is equivalent to running
rclone hashsum SHA1 remote:path.

This command can also hash data received on standard input (stdin), by
not passing a remote:path, or by passing a hyphen as remote:path when
there is data to read (if not, the hyphen will be treated literally, as
a relative path).

This command can also hash data received on STDIN, if not passing a
remote:path.

    rclone sha1sum remote:path [flags]

Options

          --base64               Output base64 encoded hashsum
      -C, --checkfile string     Validate hashes against a given SUM file instead of printing them
          --download             Download the file and hash it locally; if this flag is not specified, the hash is requested from the remote
      -h, --help                 help for sha1sum
          --output-file string   Output hashsums to a file rather than the terminal

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone size

Prints the total size and number of objects in remote:path.

Synopsis

Counts objects in the path and calculates the total size. Prints the
result to standard output.

By default the output is in human-readable format, but shows values in
both human-readable format as well as the raw numbers (global option
--human-readable is not considered). Use option --json to format output
as JSON instead.

Recurses by default, use --max-depth 1 to stop the recursion.

Some backends do not always provide file sizes, see for example Google
Photos and Google Docs. Rclone will then show a notice in the log
indicating how many such files were encountered, and count them in as
empty files in the output of the size command.

    rclone size remote:path [flags]

Options

      -h, --help   help for size
          --json   Format output as JSON

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone version

Show the version number.

Synopsis

Show the rclone version number, the go version, the build target OS and
architecture, the runtime OS and kernel version and bitness, build tags
and the type of executable (static or dynamic).

For example:

    $ rclone version
    rclone v1.55.0
    - os/version: ubuntu 18.04 (64 bit)
    - os/kernel: 4.15.0-136-generic (x86_64)
    - os/type: linux
    - os/arch: amd64
    - go/version: go1.16
    - go/linking: static
    - go/tags: none

Note: before rclone version 1.55 the os/type and os/arch lines were
merged, and the "go/version" line was tagged as "go version".

If you supply the --check flag, then it will do an online check to
compare your version with the latest release and the latest beta.

    $ rclone version --check
    yours:  1.42.0.6
    latest: 1.42          (released 2018-06-16)
    beta:   1.42.0.5      (released 2018-06-17)

Or

    $ rclone version --check
    yours:  1.41
    latest: 1.42          (released 2018-06-16)
      upgrade: https://downloads.rclone.org/v1.42
    beta:   1.42.0.5      (released 2018-06-17)
      upgrade: https://beta.rclone.org/v1.42-005-g56e1e820

If you supply the --deps flag then rclone will print a list of all the
packages it depends on and their versions along with some other
information about the build.

    rclone version [flags]

Options

          --check   Check for new version
          --deps    Show the Go dependencies
      -h, --help    help for version

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone cleanup

Clean up the remote if possible.

Synopsis

Clean up the remote if possible. Empty the trash or delete old file
versions. Not supported by all remotes.

    rclone cleanup remote:path [flags]

Options

      -h, --help   help for cleanup

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone dedupe

Interactively find duplicate filenames and delete/rename them.

Synopsis

By default dedupe interactively finds files with duplicate names and
offers to delete all but one or rename them to be different. This is
known as deduping by name.

Deduping by name is only useful with a small group of backends (e.g.
Google Drive, Opendrive) that can have duplicate file names. It can be
run on wrapping backends (e.g. crypt) if they wrap a backend which
supports duplicate file names.

However if --by-hash is passed in then dedupe will find files with
duplicate hashes instead which will work on any backend which supports
at least one hash. This can be used to find files with duplicate
content. This is known as deduping by hash.

If deduping by name, first rclone will merge directories with the same
name. It will do this iteratively until all the identically named
directories have been merged.

Next, if deduping by name, for every group of duplicate file names /
hashes, it will delete all but one identical file it finds without
confirmation. This means that for most duplicated files the dedupe
command will not be interactive.

dedupe considers files to be identical if they have the same file path
and the same hash. If the backend does not support hashes (e.g. crypt
wrapping Google Drive) then they will never be found to be identical. If
you use the --size-only flag then files will be considered identical if
they have the same size (any hash will be ignored). This can be useful
on crypt backends which do not support hashes.

Next rclone will resolve the remaining duplicates. Exactly which action
is taken depends on the dedupe mode. By default, rclone will
interactively query the user for each one.

Important: Since this can cause data loss, test first with the --dry-run
or the --interactive/-i flag.

Here is an example run.

Before - with duplicates

    $ rclone lsl drive:dupes
      6048320 2016-03-05 16:23:16.798000000 one.txt
      6048320 2016-03-05 16:23:11.775000000 one.txt
       564374 2016-03-05 16:23:06.731000000 one.txt
      6048320 2016-03-05 16:18:26.092000000 one.txt
      6048320 2016-03-05 16:22:46.185000000 two.txt
      1744073 2016-03-05 16:22:38.104000000 two.txt
       564374 2016-03-05 16:22:52.118000000 two.txt

Now the dedupe session

    $ rclone dedupe drive:dupes
    2016/03/05 16:24:37 Google drive root 'dupes': Looking for duplicates using interactive mode.
    one.txt: Found 4 files with duplicate names
    one.txt: Deleting 2/3 identical duplicates (MD5 "1eedaa9fe86fd4b8632e2ac549403b36")
    one.txt: 2 duplicates remain
      1:      6048320 bytes, 2016-03-05 16:23:16.798000000, MD5 1eedaa9fe86fd4b8632e2ac549403b36
      2:       564374 bytes, 2016-03-05 16:23:06.731000000, MD5 7594e7dc9fc28f727c42ee3e0749de81
    s) Skip and do nothing
    k) Keep just one (choose which in next step)
    r) Rename all to be different (by changing file.jpg to file-1.jpg)
    s/k/r> k
    Enter the number of the file to keep> 1
    one.txt: Deleted 1 extra copies
    two.txt: Found 3 files with duplicate names
    two.txt: 3 duplicates remain
      1:       564374 bytes, 2016-03-05 16:22:52.118000000, MD5 7594e7dc9fc28f727c42ee3e0749de81
      2:      6048320 bytes, 2016-03-05 16:22:46.185000000, MD5 1eedaa9fe86fd4b8632e2ac549403b36
      3:      1744073 bytes, 2016-03-05 16:22:38.104000000, MD5 851957f7fb6f0bc4ce76be966d336802
    s) Skip and do nothing
    k) Keep just one (choose which in next step)
    r) Rename all to be different (by changing file.jpg to file-1.jpg)
    s/k/r> r
    two-1.txt: renamed from: two.txt
    two-2.txt: renamed from: two.txt
    two-3.txt: renamed from: two.txt

The result being

    $ rclone lsl drive:dupes
      6048320 2016-03-05 16:23:16.798000000 one.txt
       564374 2016-03-05 16:22:52.118000000 two-1.txt
      6048320 2016-03-05 16:22:46.185000000 two-2.txt
      1744073 2016-03-05 16:22:38.104000000 two-3.txt

Dedupe can be run non interactively using the --dedupe-mode flag or by
using an extra parameter with the same value

-   --dedupe-mode interactive - interactive as above.
-   --dedupe-mode skip - removes identical files then skips anything
    left.
-   --dedupe-mode first - removes identical files then keeps the first
    one.
-   --dedupe-mode newest - removes identical files then keeps the newest
    one.
-   --dedupe-mode oldest - removes identical files then keeps the oldest
    one.
-   --dedupe-mode largest - removes identical files then keeps the
    largest one.
-   --dedupe-mode smallest - removes identical files then keeps the
    smallest one.
-   --dedupe-mode rename - removes identical files then renames the rest
    to be different.
-   --dedupe-mode list - lists duplicate dirs and files only and changes
    nothing.

For example, to rename all the identically named photos in your Google
Photos directory, do

    rclone dedupe --dedupe-mode rename "drive:Google Photos"

Or

    rclone dedupe rename "drive:Google Photos"

    rclone dedupe [mode] remote:path [flags]

Options

          --by-hash              Find identical hashes rather than names
          --dedupe-mode string   Dedupe mode interactive|skip|first|newest|oldest|largest|smallest|rename (default "interactive")
      -h, --help                 help for dedupe

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone about

Get quota information from the remote.

Synopsis

Prints quota information about a remote to standard output. The output
is typically used, free, quota and trash contents.

E.g. Typical output from rclone about remote: is:

    Total:   17 GiB
    Used:    7.444 GiB
    Free:    1.315 GiB
    Trashed: 100.000 MiB
    Other:   8.241 GiB

Where the fields are:

-   Total: Total size available.
-   Used: Total size used.
-   Free: Total space available to this user.
-   Trashed: Total space used by trash.
-   Other: Total amount in other storage (e.g. Gmail, Google Photos).
-   Objects: Total number of objects in the storage.

All sizes are in number of bytes.

Applying a --full flag to the command prints the bytes in full, e.g.

    Total:   18253611008
    Used:    7993453766
    Free:    1411001220
    Trashed: 104857602
    Other:   8849156022

A --json flag generates conveniently machine-readable output, e.g.

    {
      "total": 18253611008,
      "used": 7993453766,
      "trashed": 104857602,
      "other": 8849156022,
      "free": 1411001220
    }

Not all backends print all fields. Information is not included if it is
not provided by a backend. Where the value is unlimited it is omitted.

Some backends does not support the rclone about command at all, see
complete list in documentation.

    rclone about remote: [flags]

Options

          --full   Full numbers instead of human-readable
      -h, --help   help for about
          --json   Format output as JSON

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone archive

Perform an action on an archive.

Synopsis

Perform an action on an archive. Requires the use of a subcommand to
specify the protocol, e.g.

    rclone archive list remote:file.zip

Each subcommand has its own options which you can see in their help.

See rclone archive create for the archive formats supported.

    rclone archive <action> [opts] <source> [<destination>] [flags]

Options

      -h, --help   help for archive

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.
-   rclone archive create - Archive source file(s) to destination.
-   rclone archive extract - Extract archives from source to
    destination.
-   rclone archive list - List archive contents from source.

rclone archive create

Archive source file(s) to destination.

Synopsis

Creates an archive from the files in source:path and saves the archive
to dest:path. If dest:path is missing, it will write to the console.

The valid formats for the --format flag are listed below. If --format is
not set rclone will guess it from the extension of dest:path.

  Format    Extensions
  --------- -----------------------------------
  zip       .zip
  tar       .tar
  tar.gz    .tar.gz, .tgz, .taz
  tar.bz2   .tar.bz2, .tb2, .tbz, .tbz2, .tz2
  tar.lz    .tar.lz
  tar.lz4   .tar.lz4
  tar.xz    .tar.xz, .txz
  tar.zst   .tar.zst, .tzst
  tar.br    .tar.br
  tar.sz    .tar.sz
  tar.mz    .tar.mz

The --prefix and --full-path flags control the prefix for the files in
the archive.

If the flag --full-path is set then the files will have the full source
path as the prefix.

If the flag --prefix=<value> is set then the files will have <value> as
prefix. It's possible to create invalid file names with --prefix=<value>
so use with caution. Flag --prefix has priority over --full-path.

Given a directory /sourcedir with the following:

    file1.txt
    dir1/file2.txt

Running the command rclone archive create /sourcedir /dest.tar.gz will
make an archive with the contents:

    file1.txt
    dir1/
    dir1/file2.txt

Running the command
rclone archive create --full-path /sourcedir /dest.tar.gz will make an
archive with the contents:

    sourcedir/file1.txt
    sourcedir/dir1/
    sourcedir/dir1/file2.txt

Running the command
rclone archive create --prefix=my_new_path /sourcedir /dest.tar.gz will
make an archive with the contents:

    my_new_path/file1.txt
    my_new_path/dir1/
    my_new_path/dir1/file2.txt

    rclone archive create [flags] <source> [<destination>]

Options

          --format string   Create the archive with format or guess from extension.
          --full-path       Set prefix for files in archive to source path
      -h, --help            help for create
          --prefix string   Set prefix for files in archive to entered value or source path

See the global flags page for global options not listed here.

See Also

-   rclone archive - Perform an action on an archive.

rclone archive extract

Extract archives from source to destination.

Synopsis

Extract the archive contents to a destination directory auto detecting
the format. See rclone archive create for the archive formats supported.

For example on this archive:

    $ rclone archive list --long remote:archive.zip
            6 2025-10-30 09:46:23.000000000 file.txt
            0 2025-10-30 09:46:57.000000000 dir/
            4 2025-10-30 09:46:57.000000000 dir/bye.txt

You can run extract like this

    $ rclone archive extract remote:archive.zip remote:extracted

Which gives this result

    $ rclone tree remote:extracted
    /
    ├── dir
    │   └── bye.txt
    └── file.txt

The source or destination or both can be local or remote.

Filters can be used to only extract certain files:

    $ rclone archive extract archive.zip partial --include "bye.*"
    $ rclone tree partial
    /
    └── dir
        └── bye.txt

The archive backend can also be used to extract files. It can be used to
read only mount archives also but it supports a different set of archive
formats to the archive commands.

    rclone archive extract [flags] <source> <destination>

Options

      -h, --help   help for extract

See the global flags page for global options not listed here.

See Also

-   rclone archive - Perform an action on an archive.

rclone archive list

List archive contents from source.

Synopsis

List the contents of an archive to the console, auto detecting the
format. See rclone archive create for the archive formats supported.

For example:

    $ rclone archive list remote:archive.zip
            6 file.txt
            0 dir/
            4 dir/bye.txt

Or with --long flag for more info:

    $ rclone archive list --long remote:archive.zip
            6 2025-10-30 09:46:23.000000000 file.txt
            0 2025-10-30 09:46:57.000000000 dir/
            4 2025-10-30 09:46:57.000000000 dir/bye.txt

Or with --plain flag which is useful for scripting:

    $ rclone archive list --plain /path/to/archive.zip
    file.txt
    dir/
    dir/bye.txt

Or with --dirs-only:

    $ rclone archive list --plain --dirs-only /path/to/archive.zip
    dir/

Or with --files-only:

    $ rclone archive list --plain --files-only /path/to/archive.zip
    file.txt
    dir/bye.txt

Filters may also be used:

    $ rclone archive list --long archive.zip --include "bye.*"
            4 2025-10-30 09:46:57.000000000 dir/bye.txt

The archive backend can also be used to list files. It can be used to
read only mount archives also but it supports a different set of archive
formats to the archive commands.

    rclone archive list [flags] <source>

Options

          --dirs-only    Only list directories
          --files-only   Only list files
      -h, --help         help for list
          --long         List extra attributtes
          --plain        Only list file names

See the global flags page for global options not listed here.

See Also

-   rclone archive - Perform an action on an archive.

rclone authorize

Remote authorization.

Synopsis

Remote authorization. Used to authorize a remote or headless rclone from
a machine with a browser. Use as instructed by rclone config. See also
the remote setup documentation.

The command requires 1-3 arguments:

-   Name of a backend (e.g. "drive", "s3")
-   Either a base64 encoded JSON blob obtained from a previous rclone
    config session
-   Or a client_id and client_secret pair obtained from the remote
    service

Use --auth-no-open-browser to prevent rclone to open auth link in
default browser automatically.

Use --template to generate HTML output via a custom Go template. If a
blank string is provided as an argument to this flag, the default
template is used.

    rclone authorize <backendname> [base64_json_blob | client_id client_secret] [flags]

Options

          --auth-no-open-browser   Do not automatically open auth link in default browser
      -h, --help                   help for authorize
          --template string        The path to a custom Go template for generating HTML responses

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone backend

Run a backend-specific command.

Synopsis

This runs a backend-specific command. The commands themselves (except
for "help" and "features") are defined by the backends and you should
see the backend docs for definitions.

You can discover what commands a backend implements by using

    rclone backend help remote:
    rclone backend help <backendname>

You can also discover information about the backend using (see
operations/fsinfo in the remote control docs for more info).

    rclone backend features remote:

Pass options to the backend command with -o. This should be key=value or
key, e.g.:

    rclone backend stats remote:path stats -o format=json -o long

Pass arguments to the backend by placing them on the end of the line

    rclone backend cleanup remote:path file1 file2 file3

Note to run these commands on a running backend then see backend/command
in the rc docs.

    rclone backend <command> remote:path [opts] <args> [flags]

Options

      -h, --help                 help for backend
          --json                 Always output in JSON format
      -o, --option stringArray   Option in the form name=value or name

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone bisync

Perform bidirectional synchronization between two paths.

Synopsis

Perform bidirectional synchronization between two paths.

Bisync provides a bidirectional cloud sync solution in rclone. It
retains the Path1 and Path2 filesystem listings from the prior run. On
each successive run it will:

-   list files on Path1 and Path2, and check for changes on each side.
    Changes include New, Newer, Older, and Deleted files.
-   Propagate changes on Path1 to Path2, and vice-versa.

Bisync is considered an advanced command, so use with care. Make sure
you have read and understood the entire manual (especially the
Limitations section) before using, or data loss can result. Questions
can be asked in the Rclone Forum.

See full bisync description for details.

    rclone bisync remote1:path1 remote2:path2 [flags]

Options

          --backup-dir1 string                   --backup-dir for Path1. Must be a non-overlapping path on the same remote.
          --backup-dir2 string                   --backup-dir for Path2. Must be a non-overlapping path on the same remote.
          --check-access                         Ensure expected RCLONE_TEST files are found on both Path1 and Path2 filesystems, else abort.
          --check-filename string                Filename for --check-access (default: RCLONE_TEST)
          --check-sync string                    Controls comparison of final listings: true|false|only (default: true) (default "true")
          --compare string                       Comma-separated list of bisync-specific compare options ex. 'size,modtime,checksum' (default: 'size,modtime')
          --conflict-loser ConflictLoserAction   Action to take on the loser of a sync conflict (when there is a winner) or on both files (when there is no winner): , num, pathname, delete (default: num)
          --conflict-resolve string              Automatically resolve conflicts by preferring the version that is: none, path1, path2, newer, older, larger, smaller (default: none) (default "none")
          --conflict-suffix string               Suffix to use when renaming a --conflict-loser. Can be either one string or two comma-separated strings to assign different suffixes to Path1/Path2. (default: 'conflict')
          --create-empty-src-dirs                Sync creation and deletion of empty directories. (Not compatible with --remove-empty-dirs)
          --download-hash                        Compute hash by downloading when otherwise unavailable. (warning: may be slow and use lots of data!)
          --filters-file string                  Read filtering patterns from a file
          --force                                Bypass --max-delete safety check and run the sync. Consider using with --verbose
      -h, --help                                 help for bisync
          --ignore-listing-checksum              Do not use checksums for listings (add --ignore-checksum to additionally skip post-copy checksum checks)
          --max-lock Duration                    Consider lock files older than this to be expired (default: 0 (never expire)) (minimum: 2m) (default 0s)
          --no-cleanup                           Retain working files (useful for troubleshooting and testing).
          --no-slow-hash                         Ignore listing checksums only on backends where they are slow
          --recover                              Automatically recover from interruptions without requiring --resync.
          --remove-empty-dirs                    Remove ALL empty directories at the final cleanup step.
          --resilient                            Allow future runs to retry after certain less-serious errors, instead of requiring --resync.
      -1, --resync                               Performs the resync run. Equivalent to --resync-mode path1. Consider using --verbose or --dry-run first.
          --resync-mode string                   During resync, prefer the version that is: path1, path2, newer, older, larger, smaller (default: path1 if --resync, otherwise none for no resync.) (default "none")
          --slow-hash-sync-only                  Ignore slow checksums for listings and deltas, but still consider them during sync calls.
          --workdir string                       Use custom working dir - useful for testing. (default: $HOME/.cache/rclone/bisync)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Copy Options

Flags for anything which can copy a file

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Sync Options

Flags used for sync commands

          --backup-dir string               Make backups into hierarchy based in DIR
          --delete-after                    When synchronizing, delete files on destination after transferring (default)
          --delete-before                   When synchronizing, delete files on destination before transferring
          --delete-during                   When synchronizing, delete files during transfer
          --fix-case                        Force rename of case insensitive dest to match source
          --ignore-errors                   Delete even if there are I/O errors
          --list-cutoff int                 To save memory, sort directory listings on disk above this threshold (default 1000000)
          --max-delete int                  When synchronizing, limit the number of deletes (default -1)
          --max-delete-size SizeSuffix      When synchronizing, limit the total size of deletes (default off)
          --suffix string                   Suffix to add to changed files
          --suffix-keep-extension           Preserve the extension when using --suffix
          --track-renames                   When synchronizing, track file renames and do a server-side move if possible
          --track-renames-strategy string   Strategies to use when synchronizing using track-renames hash|modtime|leaf (default "hash")

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone cat

Concatenates any files and sends them to stdout.

Synopsis

Sends any files to standard output.

You can use it like this to output a single file

    rclone cat remote:path/to/file

Or like this to output any file in dir or its subdirectories.

    rclone cat remote:path/to/dir

Or like this to output any .txt files in dir or its subdirectories.

    rclone --include "*.txt" cat remote:path/to/dir

Use the --head flag to print characters only at the start, --tail for
the end and --offset and --count to print a section in the middle. Note
that if offset is negative it will count from the end, so
--offset -1 --count 1 is equivalent to --tail 1.

Use the --separator flag to print a separator value between files. Be
sure to shell-escape special characters. For example, to print a newline
between files, use:

-   bash:

        rclone --include "*.txt" --separator $'\n' cat remote:path/to/dir

-   powershell:

        rclone --include "*.txt" --separator "`n" cat remote:path/to/dir

    rclone cat remote:path [flags]

Options

          --count int          Only print N characters (default -1)
          --discard            Discard the output instead of printing
          --head int           Only print the first N characters
      -h, --help               help for cat
          --offset int         Start printing at offset N (or from end if -ve)
          --separator string   Separator to use between objects when printing multiple files
          --tail int           Only print the last N characters

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone checksum

Checks the files in the destination against a SUM file.

Synopsis

Checks that hashsums of destination files match the SUM file. It
compares hashes (MD5, SHA1, etc) and logs a report of files which don't
match. It doesn't alter the file system.

The sumfile is treated as the source and the dst:path is treated as the
destination for the purposes of the output.

If you supply the --download flag, it will download the data from the
remote and calculate the content hash on the fly. This can be useful for
remotes that don't support hashes or if you really want to check all the
data.

Note that hash values in the SUM file are treated as case insensitive.

If you supply the --one-way flag, it will only check that files in the
source match the files in the destination, not the other way around.
This means that extra files in the destination that are not in the
source will not be detected.

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The default number of parallel checks is 8. See the --checkers option
for more information.

    rclone checksum <hash> sumfile dst:path [flags]

Options

          --combined string         Make a combined report of changes to this file
          --differ string           Report all non-matching files to this file
          --download                Check by hashing the contents
          --error string            Report all files with errors (hashing or reading) to this file
      -h, --help                    help for checksum
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
          --one-way                 Check one way only, source files must exist on remote

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone completion

Output completion script for a given shell.

Synopsis

Generates a shell completion script for rclone. Run with --help to list
the supported shells.

Options

      -h, --help   help for completion

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.
-   rclone completion bash - Output bash completion script for rclone.
-   rclone completion fish - Output fish completion script for rclone.
-   rclone completion powershell - Output powershell completion script
    for rclone.
-   rclone completion zsh - Output zsh completion script for rclone.

rclone completion bash

Output bash completion script for rclone.

Synopsis

Generates a bash shell autocompletion script for rclone.

By default, when run without any arguments,

    rclone completion bash

the generated script will be written to

    /etc/bash_completion.d/rclone

and so rclone will probably need to be run as root, or with sudo.

If you supply a path to a file as the command line argument, then the
generated script will be written to that file, in which case you should
not need root privileges.

If output_file is "-", then the output will be written to stdout.

If you have installed the script into the default location, you can
logout and login again to use the autocompletion script.

Alternatively, you can source the script directly

    . /path/to/my_bash_completion_scripts/rclone

and the autocompletion functionality will be added to your current
shell.

    rclone completion bash [output_file] [flags]

Options

      -h, --help   help for bash

See the global flags page for global options not listed here.

See Also

-   rclone completion - Output completion script for a given shell.

rclone completion fish

Output fish completion script for rclone.

Synopsis

Generates a fish autocompletion script for rclone.

This writes to /etc/fish/completions/rclone.fish by default so will
probably need to be run with sudo or as root, e.g.

    sudo rclone completion fish

Logout and login again to use the autocompletion scripts, or source them
directly

    . /etc/fish/completions/rclone.fish

If you supply a command line argument the script will be written there.

If output_file is "-", then the output will be written to stdout.

    rclone completion fish [output_file] [flags]

Options

      -h, --help   help for fish

See the global flags page for global options not listed here.

See Also

-   rclone completion - Output completion script for a given shell.

rclone completion powershell

Output powershell completion script for rclone.

Synopsis

Generate the autocompletion script for powershell.

To load completions in your current shell session:

    rclone completion powershell | Out-String | Invoke-Expression

To load completions for every new session, add the output of the above
command to your powershell profile.

If output_file is "-" or missing, then the output will be written to
stdout.

    rclone completion powershell [output_file] [flags]

Options

      -h, --help   help for powershell

See the global flags page for global options not listed here.

See Also

-   rclone completion - Output completion script for a given shell.

rclone completion zsh

Output zsh completion script for rclone.

Synopsis

Generates a zsh autocompletion script for rclone.

This writes to /usr/share/zsh/vendor-completions/_rclone by default so
will probably need to be run with sudo or as root, e.g.

    sudo rclone completion zsh

Logout and login again to use the autocompletion scripts, or source them
directly

    autoload -U compinit && compinit

If you supply a command line argument the script will be written there.

If output_file is "-", then the output will be written to stdout.

    rclone completion zsh [output_file] [flags]

Options

      -h, --help   help for zsh

See the global flags page for global options not listed here.

See Also

-   rclone completion - Output completion script for a given shell.

rclone config create

Create a new remote with name, type and options.

Synopsis

Create a new remote of name with type and options. The options should be
passed in pairs of key value or as key=value.

For example, to make a swift remote of name myremote using auto config
you would do:

    rclone config create myremote swift env_auth true
    rclone config create myremote swift env_auth=true

So for example if you wanted to configure a Google Drive remote but
using remote authorization you would do this:

    rclone config create mydrive drive config_is_local=false

Note that if the config process would normally ask a question the
default is taken (unless --non-interactive is used). Each time that
happens rclone will print or DEBUG a message saying how to affect the
value taken.

If any of the parameters passed is a password field, then rclone will
automatically obscure them if they aren't already obscured before
putting them in the config file.

NB If the password parameter is 22 characters or longer and consists
only of base64 characters then rclone can get confused about whether the
password is already obscured or not and put unobscured passwords into
the config file. If you want to be 100% certain that the passwords get
obscured then use the --obscure flag, or if you are 100% certain you are
already passing obscured passwords then use --no-obscure. You can also
set obscured passwords using the rclone config password command.

The flag --non-interactive is for use by applications that wish to
configure rclone themselves, rather than using rclone's text based
configuration questions. If this flag is set, and rclone needs to ask
the user a question, a JSON blob will be returned with the question in
it.

This will look something like (some irrelevant detail removed):

    {
      "State": "*oauth-islocal,teamdrive,,",
      "Option": {
        "Name": "config_is_local",
        "Help": "Use web browser to automatically authenticate rclone with remote?\n * Say Y if the machine running rclone has a web browser you can use\n * Say N if running rclone on a (remote) machine without web browser access\nIf not sure try Y. If Y failed, try N.\n",
        "Default": true,
        "Examples": [
          {
            "Value": "true",
            "Help": "Yes"
          },
          {
            "Value": "false",
            "Help": "No"
          }
        ],
        "Required": false,
        "IsPassword": false,
        "Type": "bool",
        "Exclusive": true,
      },
      "Error": "",
    }

The format of Option is the same as returned by rclone config providers.
The question should be asked to the user and returned to rclone as the
--result option along with the --state parameter.

The keys of Option are used as follows:

-   Name - name of variable - show to user
-   Help - help text. Hard wrapped at 80 chars. Any URLs should be
    clicky.
-   Default - default value - return this if the user just wants the
    default.
-   Examples - the user should be able to choose one of these
-   Required - the value should be non-empty
-   IsPassword - the value is a password and should be edited as such
-   Type - type of value, eg bool, string, int and others
-   Exclusive - if set no free-form entry allowed only the Examples
-   Irrelevant keys Provider, ShortOpt, Hide, NoPrefix, Advanced

If Error is set then it should be shown to the user at the same time as
the question.

    rclone config update name --continue --state "*oauth-islocal,teamdrive,," --result "true"

Note that when using --continue all passwords should be passed in the
clear (not obscured). Any default config values should be passed in with
each invocation of --continue.

At the end of the non interactive process, rclone will return a result
with State as empty string.

If --all is passed then rclone will ask all the config questions, not
just the post config questions. Any parameters are used as defaults for
questions as usual.

Note that bin/config.py in the rclone source implements this protocol as
a readable demonstration.

    rclone config create name type [key value]* [flags]

Options

          --all               Ask the full set of config questions
          --continue          Continue the configuration process with an answer
      -h, --help              help for create
          --no-obscure        Force any passwords not to be obscured
          --no-output         Don't provide any output
          --non-interactive   Don't interact with user and return questions
          --obscure           Force any passwords to be obscured
          --result string     Result - use with --continue
          --state string      State - use with --continue

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config delete

Delete an existing remote.

    rclone config delete name [flags]

Options

      -h, --help   help for delete

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config disconnect

Disconnects user from remote

Synopsis

This disconnects the remote: passed in to the cloud storage system.

This normally means revoking the oauth token.

To reconnect use "rclone config reconnect".

    rclone config disconnect remote: [flags]

Options

      -h, --help   help for disconnect

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config dump

Dump the config file as JSON.

    rclone config dump [flags]

Options

      -h, --help   help for dump

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config edit

Enter an interactive configuration session.

Synopsis

Enter an interactive configuration session where you can setup new
remotes and manage existing ones. You may also set or remove a password
to protect your configuration.

    rclone config edit [flags]

Options

      -h, --help   help for edit

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config encryption

set, remove and check the encryption for the config file

Synopsis

This command sets, clears and checks the encryption for the config file
using the subcommands below.

Options

      -h, --help   help for encryption

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.
-   rclone config encryption check - Check that the config file is
    encrypted
-   rclone config encryption remove - Remove the config file encryption
    password
-   rclone config encryption set - Set or change the config file
    encryption password

rclone config encryption check

Check that the config file is encrypted

Synopsis

This checks the config file is encrypted and that you can decrypt it.

It will attempt to decrypt the config using the password you supply.

If decryption fails it will return a non-zero exit code if using
--password-command, otherwise it will prompt again for the password.

If the config file is not encrypted it will return a non zero exit code.

    rclone config encryption check [flags]

Options

      -h, --help   help for check

See the global flags page for global options not listed here.

See Also

-   rclone config encryption - set, remove and check the encryption for
    the config file

rclone config encryption remove

Remove the config file encryption password

Synopsis

Remove the config file encryption password

This removes the config file encryption, returning it to un-encrypted.

If --password-command is in use, this will be called to supply the old
config password.

If the config was not encrypted then no error will be returned and this
command will do nothing.

    rclone config encryption remove [flags]

Options

      -h, --help   help for remove

See the global flags page for global options not listed here.

See Also

-   rclone config encryption - set, remove and check the encryption for
    the config file

rclone config encryption set

Set or change the config file encryption password

Synopsis

This command sets or changes the config file encryption password.

If there was no config password set then it sets a new one, otherwise it
changes the existing config password.

Note that if you are changing an encryption password using
--password-command then this will be called once to decrypt the config
using the old password and then again to read the new password to
re-encrypt the config.

When --password-command is called to change the password then the
environment variable RCLONE_PASSWORD_CHANGE=1 will be set. So if
changing passwords programmatically you can use the environment variable
to distinguish which password you must supply.

Alternatively you can remove the password first (with
rclone config encryption remove), then set it again with this command
which may be easier if you don't mind the unencrypted config file being
on the disk briefly.

    rclone config encryption set [flags]

Options

      -h, --help   help for set

See the global flags page for global options not listed here.

See Also

-   rclone config encryption - set, remove and check the encryption for
    the config file

rclone config file

Show path of configuration file in use.

    rclone config file [flags]

Options

      -h, --help   help for file

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config password

Update password in an existing remote.

Synopsis

Update an existing remote's password. The password should be passed in
pairs of key password or as key=password. The password should be passed
in in clear (unobscured).

For example, to set password of a remote of name myremote you would do:

    rclone config password myremote fieldname mypassword
    rclone config password myremote fieldname=mypassword

This command is obsolete now that "config update" and "config create"
both support obscuring passwords directly.

    rclone config password name [key value]+ [flags]

Options

      -h, --help   help for password

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config paths

Show paths used for configuration, cache, temp etc.

    rclone config paths [flags]

Options

      -h, --help   help for paths

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config providers

List in JSON format all the providers and options.

    rclone config providers [flags]

Options

      -h, --help   help for providers

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config reconnect

Re-authenticates user with remote.

Synopsis

This reconnects remote: passed in to the cloud storage system.

To disconnect the remote use "rclone config disconnect".

This normally means going through the interactive oauth flow again.

    rclone config reconnect remote: [flags]

Options

      -h, --help   help for reconnect

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config redacted

Print redacted (decrypted) config file, or the redacted config for a
single remote.

Synopsis

This prints a redacted copy of the config file, either the whole config
file or for a given remote.

The config file will be redacted by replacing all passwords and other
sensitive info with XXX.

This makes the config file suitable for posting online for support.

It should be double checked before posting as the redaction may not be
perfect.

    rclone config redacted [<remote>] [flags]

Options

      -h, --help   help for redacted

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config show

Print (decrypted) config file, or the config for a single remote.

    rclone config show [<remote>] [flags]

Options

      -h, --help   help for show

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config string

Print connection string for a single remote.

Synopsis

Print a connection string for a single remote.

The connection strings can be used wherever a remote is needed and can
be more convenient than using the config file, especially if using the
RC API.

Backend parameters may be provided to the command also.

Example:

    $ rclone config string s3:rclone --s3-no-check-bucket
    :s3,access_key_id=XXX,no_check_bucket,provider=AWS,region=eu-west-2,secret_access_key=YYY:rclone

NB the strings are not quoted for use in shells (eg bash, powershell,
windows cmd). Most will work if enclosed in "double quotes", however
connection strings that contain double quotes will require further
quoting which is very shell dependent.

    rclone config string <remote> [flags]

Options

      -h, --help   help for string

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config touch

Ensure configuration file exists.

    rclone config touch [flags]

Options

      -h, --help   help for touch

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config update

Update options in an existing remote.

Synopsis

Update an existing remote's options. The options should be passed in
pairs of key value or as key=value.

For example, to update the env_auth field of a remote of name myremote
you would do:

    rclone config update myremote env_auth true
    rclone config update myremote env_auth=true

If the remote uses OAuth the token will be updated, if you don't require
this add an extra parameter thus:

    rclone config update myremote env_auth=true config_refresh_token=false

Note that if the config process would normally ask a question the
default is taken (unless --non-interactive is used). Each time that
happens rclone will print or DEBUG a message saying how to affect the
value taken.

If any of the parameters passed is a password field, then rclone will
automatically obscure them if they aren't already obscured before
putting them in the config file.

NB If the password parameter is 22 characters or longer and consists
only of base64 characters then rclone can get confused about whether the
password is already obscured or not and put unobscured passwords into
the config file. If you want to be 100% certain that the passwords get
obscured then use the --obscure flag, or if you are 100% certain you are
already passing obscured passwords then use --no-obscure. You can also
set obscured passwords using the rclone config password command.

The flag --non-interactive is for use by applications that wish to
configure rclone themselves, rather than using rclone's text based
configuration questions. If this flag is set, and rclone needs to ask
the user a question, a JSON blob will be returned with the question in
it.

This will look something like (some irrelevant detail removed):

    {
      "State": "*oauth-islocal,teamdrive,,",
      "Option": {
        "Name": "config_is_local",
        "Help": "Use web browser to automatically authenticate rclone with remote?\n * Say Y if the machine running rclone has a web browser you can use\n * Say N if running rclone on a (remote) machine without web browser access\nIf not sure try Y. If Y failed, try N.\n",
        "Default": true,
        "Examples": [
          {
            "Value": "true",
            "Help": "Yes"
          },
          {
            "Value": "false",
            "Help": "No"
          }
        ],
        "Required": false,
        "IsPassword": false,
        "Type": "bool",
        "Exclusive": true,
      },
      "Error": "",
    }

The format of Option is the same as returned by rclone config providers.
The question should be asked to the user and returned to rclone as the
--result option along with the --state parameter.

The keys of Option are used as follows:

-   Name - name of variable - show to user
-   Help - help text. Hard wrapped at 80 chars. Any URLs should be
    clicky.
-   Default - default value - return this if the user just wants the
    default.
-   Examples - the user should be able to choose one of these
-   Required - the value should be non-empty
-   IsPassword - the value is a password and should be edited as such
-   Type - type of value, eg bool, string, int and others
-   Exclusive - if set no free-form entry allowed only the Examples
-   Irrelevant keys Provider, ShortOpt, Hide, NoPrefix, Advanced

If Error is set then it should be shown to the user at the same time as
the question.

    rclone config update name --continue --state "*oauth-islocal,teamdrive,," --result "true"

Note that when using --continue all passwords should be passed in the
clear (not obscured). Any default config values should be passed in with
each invocation of --continue.

At the end of the non interactive process, rclone will return a result
with State as empty string.

If --all is passed then rclone will ask all the config questions, not
just the post config questions. Any parameters are used as defaults for
questions as usual.

Note that bin/config.py in the rclone source implements this protocol as
a readable demonstration.

    rclone config update name [key value]+ [flags]

Options

          --all               Ask the full set of config questions
          --continue          Continue the configuration process with an answer
      -h, --help              help for update
          --no-obscure        Force any passwords not to be obscured
          --no-output         Don't provide any output
          --non-interactive   Don't interact with user and return questions
          --obscure           Force any passwords to be obscured
          --result string     Result - use with --continue
          --state string      State - use with --continue

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone config userinfo

Prints info about logged in user of remote.

Synopsis

This prints the details of the person logged in to the cloud storage
system.

    rclone config userinfo remote: [flags]

Options

      -h, --help   help for userinfo
          --json   Format output as JSON

See the global flags page for global options not listed here.

See Also

-   rclone config - Enter an interactive configuration session.

rclone convmv

Convert file and directory names in place.

Synopsis

convmv supports advanced path name transformations for converting and
renaming files and directories by applying prefixes, suffixes, and other
alterations.

  ---------------------------------------------------------------------------------------------
  Command                                                   Description
  --------------------------------------------------------- -----------------------------------
  --name-transform prefix=XXXX                              Prepends XXXX to the file name.

  --name-transform suffix=XXXX                              Appends XXXX to the file name after
                                                            the extension.

  --name-transform suffix_keep_extension=XXXX               Appends XXXX to the file name while
                                                            preserving the original file
                                                            extension.

  --name-transform trimprefix=XXXX                          Removes XXXX if it appears at the
                                                            start of the file name.

  --name-transform trimsuffix=XXXX                          Removes XXXX if it appears at the
                                                            end of the file name.

  --name-transform regex=pattern/replacement                Applies a regex-based
                                                            transformation.

  --name-transform replace=old:new                          Replaces occurrences of old with
                                                            new in the file name.

  --name-transform date={YYYYMMDD}                          Appends or prefixes the specified
                                                            date format.

  --name-transform truncate=N                               Truncates the file name to a
                                                            maximum of N characters.

  --name-transform truncate_keep_extension=N                Truncates the file name to a
                                                            maximum of N characters while
                                                            preserving the original file
                                                            extension.

  --name-transform truncate_bytes=N                         Truncates the file name to a
                                                            maximum of N bytes (not
                                                            characters).

  --name-transform truncate_bytes_keep_extension=N          Truncates the file name to a
                                                            maximum of N bytes (not characters)
                                                            while preserving the original file
                                                            extension.

  --name-transform base64encode                             Encodes the file name in Base64.

  --name-transform base64decode                             Decodes a Base64-encoded file name.

  --name-transform encoder=ENCODING                         Converts the file name to the
                                                            specified encoding (e.g.,
                                                            ISO-8859-1, Windows-1252,
                                                            Macintosh).

  --name-transform decoder=ENCODING                         Decodes the file name from the
                                                            specified encoding.

  --name-transform charmap=MAP                              Applies a character mapping
                                                            transformation.

  --name-transform lowercase                                Converts the file name to
                                                            lowercase.

  --name-transform uppercase                                Converts the file name to
                                                            UPPERCASE.

  --name-transform titlecase                                Converts the file name to Title
                                                            Case.

  --name-transform ascii                                    Strips non-ASCII characters.

  --name-transform url                                      URL-encodes the file name.

  --name-transform nfc                                      Converts the file name to NFC
                                                            Unicode normalization form.

  --name-transform nfd                                      Converts the file name to NFD
                                                            Unicode normalization form.

  --name-transform nfkc                                     Converts the file name to NFKC
                                                            Unicode normalization form.

  --name-transform nfkd                                     Converts the file name to NFKD
                                                            Unicode normalization form.

  --name-transform command=/path/to/my/programfile names.   Executes an external program to
                                                            transform.
  ---------------------------------------------------------------------------------------------

Conversion modes:

    none
    nfc
    nfd
    nfkc
    nfkd
    replace
    prefix
    suffix
    suffix_keep_extension
    trimprefix
    trimsuffix
    index
    date
    truncate
    truncate_keep_extension
    truncate_bytes
    truncate_bytes_keep_extension
    base64encode
    base64decode
    encoder
    decoder
    ISO-8859-1
    Windows-1252
    Macintosh
    charmap
    lowercase
    uppercase
    titlecase
    ascii
    url
    regex
    command

Char maps:

    IBM-Code-Page-037
    IBM-Code-Page-437
    IBM-Code-Page-850
    IBM-Code-Page-852
    IBM-Code-Page-855
    Windows-Code-Page-858
    IBM-Code-Page-860
    IBM-Code-Page-862
    IBM-Code-Page-863
    IBM-Code-Page-865
    IBM-Code-Page-866
    IBM-Code-Page-1047
    IBM-Code-Page-1140
    ISO-8859-1
    ISO-8859-2
    ISO-8859-3
    ISO-8859-4
    ISO-8859-5
    ISO-8859-6
    ISO-8859-7
    ISO-8859-8
    ISO-8859-9
    ISO-8859-10
    ISO-8859-13
    ISO-8859-14
    ISO-8859-15
    ISO-8859-16
    KOI8-R
    KOI8-U
    Macintosh
    Macintosh-Cyrillic
    Windows-874
    Windows-1250
    Windows-1251
    Windows-1252
    Windows-1253
    Windows-1254
    Windows-1255
    Windows-1256
    Windows-1257
    Windows-1258
    X-User-Defined

Encoding masks:

    Asterisk
    BackQuote
    BackSlash
    Colon
    CrLf
    Ctl
    Del
    Dollar
    Dot
    DoubleQuote
    Exclamation
    Hash
    InvalidUtf8
    LeftCrLfHtVt
    LeftPeriod
    LeftSpace
    LeftTilde
    LtGt
    None
    Percent
    Pipe
    Question
    Raw
    RightCrLfHtVt
    RightPeriod
    RightSpace
    Semicolon
    SingleQuote
    Slash
    SquareBracket

Examples:

    rclone convmv "stories/The Quick Brown Fox!.txt" --name-transform "all,uppercase"
    // Output: STORIES/THE QUICK BROWN FOX!.TXT

    rclone convmv "stories/The Quick Brown Fox!.txt" --name-transform "all,replace=Fox:Turtle" --name-transform "all,replace=Quick:Slow"
    // Output: stories/The Slow Brown Turtle!.txt

    rclone convmv "stories/The Quick Brown Fox!.txt" --name-transform "all,base64encode"
    // Output: c3Rvcmllcw==/VGhlIFF1aWNrIEJyb3duIEZveCEudHh0

    rclone convmv "c3Rvcmllcw==/VGhlIFF1aWNrIEJyb3duIEZveCEudHh0" --name-transform "all,base64decode"
    // Output: stories/The Quick Brown Fox!.txt

    rclone convmv "stories/The Quick Brown 🦊 Fox Went to the Café!.txt" --name-transform "all,nfc"
    // Output: stories/The Quick Brown 🦊 Fox Went to the Café!.txt

    rclone convmv "stories/The Quick Brown 🦊 Fox Went to the Café!.txt" --name-transform "all,nfd"
    // Output: stories/The Quick Brown 🦊 Fox Went to the Café!.txt

    rclone convmv "stories/The Quick Brown 🦊 Fox!.txt" --name-transform "all,ascii"
    // Output: stories/The Quick Brown  Fox!.txt

    rclone convmv "stories/The Quick Brown Fox!.txt" --name-transform "all,trimsuffix=.txt"
    // Output: stories/The Quick Brown Fox!

    rclone convmv "stories/The Quick Brown Fox!.txt" --name-transform "all,prefix=OLD_"
    // Output: OLD_stories/OLD_The Quick Brown Fox!.txt

    rclone convmv "stories/The Quick Brown 🦊 Fox Went to the Café!.txt" --name-transform "all,charmap=ISO-8859-7"
    // Output: stories/The Quick Brown _ Fox Went to the Caf_!.txt

    rclone convmv "stories/The Quick Brown Fox: A Memoir [draft].txt" --name-transform "all,encoder=Colon,SquareBracket"
    // Output: stories/The Quick Brown Fox： A Memoir ［draft］.txt

    rclone convmv "stories/The Quick Brown 🦊 Fox Went to the Café!.txt" --name-transform "all,truncate=21"
    // Output: stories/The Quick Brown 🦊 Fox

    rclone convmv "stories/The Quick Brown Fox!.txt" --name-transform "all,command=echo"
    // Output: stories/The Quick Brown Fox!.txt

    rclone convmv "stories/The Quick Brown Fox!" --name-transform "date=-{YYYYMMDD}"
    // Output: stories/The Quick Brown Fox!-20260605

    rclone convmv "stories/The Quick Brown Fox!" --name-transform "date=-{macfriendlytime}"
    // Output: stories/The Quick Brown Fox!-2026-06-05 0414PM

    rclone convmv "stories/The Quick Brown Fox!.txt" --name-transform "all,regex=[\\.\\w]/ab"
    // Output: ababababababab/ababab ababababab ababababab ababab!abababab

The regex command generally accepts Perl-style regular expressions, the
exact syntax is defined in the Go regular expression reference. The
replacement string may contain capturing group variables, referencing
capturing groups using the syntax $name or ${name}, where the name can
refer to a named capturing group or it can simply be the index as a
number. To insert a literal $, use $$.

Multiple transformations can be used in sequence, applied in the order
they are specified on the command line.

The --name-transform flag is also available in sync, copy, and move.

Files vs Directories

By default --name-transform will only apply to file names. The means
only the leaf file name will be transformed. However some of the
transforms would be better applied to the whole path or just
directories. To choose which which part of the file path is affected
some tags can be added to the --name-transform.

  -----------------------------------------------------------------------
  Tag                                 Effect
  ----------------------------------- -----------------------------------
  file                                Only transform the leaf name of
                                      files (DEFAULT)

  dir                                 Only transform name of
                                      directories - these may appear
                                      anywhere in the path

  all                                 Transform the entire path for files
                                      and directories
  -----------------------------------------------------------------------

This is used by adding the tag into the transform name like this:
--name-transform file,prefix=ABC or --name-transform dir,prefix=DEF.

For some conversions using all is more likely to be useful, for example
--name-transform all,nfc.

Note that --name-transform may not add path separators / to the name.
This will cause an error.

Ordering and Conflicts

-   Transformations will be applied in the order specified by the user.
    -   If the file tag is in use (the default) then only the leaf name
        of files will be transformed.
    -   If the dir tag is in use then directories anywhere in the path
        will be transformed
    -   If the all tag is in use then directories and files anywhere in
        the path will be transformed
    -   Each transformation will be run one path segment at a time.
    -   If a transformation adds a / or ends up with an empty path
        segment then that will be an error.
-   It is up to the user to put the transformations in a sensible order.
    -   Conflicting transformations, such as prefix followed by
        trimprefix or nfc followed by nfd, are possible.
    -   Instead of enforcing mutual exclusivity, transformations are
        applied in sequence as specified by the user, allowing for
        intentional use cases (e.g., trimming one prefix before adding
        another).
    -   Users should be aware that certain combinations may lead to
        unexpected results and should verify transformations using
        --dry-run before execution.

Race Conditions and Non-Deterministic Behavior

Some transformations, such as replace=old:new, may introduce conflicts
where multiple source files map to the same destination name. This can
lead to race conditions when performing concurrent transfers. It is up
to the user to anticipate these.

-   If two files from the source are transformed into the same name at
    the destination, the final state may be non-deterministic.
-   Running rclone check after a sync using such transformations may
    erroneously report missing or differing files due to overwritten
    results.

To minimize risks, users should:

-   Carefully review transformations that may introduce conflicts.
-   Use --dry-run to inspect changes before executing a sync (but keep
    in mind that it won't show the effect of non-deterministic
    transformations).
-   Avoid transformations that cause multiple distinct source files to
    map to the same destination name.
-   Consider disabling concurrency with --transfers=1 if necessary.
-   Certain transformations (e.g. prefix) will have a multiplying effect
    every time they are used. Avoid these when using bisync.

    rclone convmv dest:path --name-transform XXX [flags]

Options

          --create-empty-src-dirs   Create empty source dirs on destination after move
          --delete-empty-src-dirs   Delete empty source dirs after move
      -h, --help                    help for convmv

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Copy Options

Flags for anything which can copy a file

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone copyto

Copy files from source to dest, skipping identical files.

Synopsis

If source:path is a file or directory then it copies it to a file or
directory named dest:path.

This can be used to upload single files to other than their current
name. If the source is a directory then it acts exactly like the copy
command.

So

    rclone copyto src dst

where src and dst are rclone paths, either remote:path or /path/to/local
or C:\windows\path\if\on\windows.

This will:

    if src is file
        copy it to dst, overwriting an existing file if it exists
    if src is directory
        copy it to dst, overwriting existing files if they exist
        see copy command for full details

This doesn't transfer files that are identical on src and dst, testing
by size and modification time or MD5SUM. It doesn't delete files from
the destination.

If you are looking to copy just a byte range of a file, please see
rclone cat --offset X --count Y.

Note: Use the -P/--progress flag to view real-time transfer statistics.

Logger Flags

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The --dest-after flag writes a list file using the same format flags as
lsf (including customizable options for hash, modtime, etc.)
Conceptually it is similar to rsync's --itemize-changes, but not
identical -- it should output an accurate list of what will be on the
destination after the command is finished.

When the --no-traverse flag is set, all logs involving files that exist
only on the destination will be incomplete or completely missing.

Note that these logger flags have a few limitations, and certain
scenarios are not currently supported:

-   --max-duration / CutoffModeHard
-   --compare-dest / --copy-dest
-   server-side moves of an entire dir at once
-   High-level retries, because there would be duplicates (use
    --retries 1 to disable)
-   Possibly some unusual error scenarios

Note also that each file is logged during execution, as opposed to
after, so it is most useful as a predictor of what SHOULD happen to each
file (which may or may not match what actually DID).

    rclone copyto source:path dest:path [flags]

Options

          --absolute                Put a leading / in front of path names
          --combined string         Make a combined report of changes to this file
          --csv                     Output in CSV format
          --dest-after string       Report all files that exist on the dest post-sync
          --differ string           Report all non-matching files to this file
      -d, --dir-slash               Append a slash to directory names (default true)
          --dirs-only               Only list directories
          --error string            Report all files with errors (hashing or reading) to this file
          --files-only              Only list files (default true)
      -F, --format string           Output format - see lsf help for details (default "p")
          --hash h                  Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "md5")
      -h, --help                    help for copyto
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
      -s, --separator string        Separator for the items in the format (default ";")
      -t, --timeformat string       Specify a custom time format - see docs for details (default: 2006-01-02 15:04:05)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Copy Options

Flags for anything which can copy a file

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone copyurl

Copy the contents of the URL supplied content to dest:path.

Synopsis

Download a URL's content and copy it to the destination without saving
it in temporary storage.

Setting --auto-filename will attempt to automatically determine the
filename from the URL (after any redirections) and used in the
destination path.

With --header-filename in addition, if a specific filename is set in
HTTP headers, it will be used instead of the name from the URL. With
--print-filename in addition, the resulting file name will be printed.

Setting --no-clobber will prevent overwriting file on the destination if
there is one with the same name.

Setting --stdout or making the output file name - will cause the output
to be written to standard output.

Setting --urls allows you to input a CSV file of URLs in format: URL,
FILENAME. If --urls is in use then replace the URL in the arguments with
the file containing the URLs, e.g.:

    rclone copyurl --urls myurls.csv remote:dir

Missing filenames will be autogenerated equivalent to using
--auto-filename. Note that --stdout and --print-filename are
incompatible with --urls. This will do --transfers copies in parallel.
Note that if --auto-filename is desired for all URLs then a file with
only URLs and no filename can be used.

Each FILENAME in the CSV file can start with a relative path which will
be appended to the destination path provided at the command line. For
example, running the command shown above with the following CSV file
will write two files to the destination: remote:dir/local/path/bar.json
and remote:dir/another/local/directory/qux.json

    https://example.org/foo/bar.json,local/path/bar.json
    https://example.org/qux/baz.json,another/local/directory/qux.json

Troubleshooting

If you can't get rclone copyurl to work then here are some things you
can try:

-   --disable-http2 rclone will use HTTP2 if available - try disabling
    it
-   --bind 0.0.0.0 rclone will use IPv6 if available - try disabling it
-   --bind ::0 to disable IPv4
-   --user agent curl - some sites have whitelists for curl's
    user-agent - try that
-   Make sure the site works with curl directly

    rclone copyurl https://example.com dest:path [flags]

Options

      -a, --auto-filename     Get the file name from the URL and use it for destination file path
          --header-filename   Get the file name from the Content-Disposition header
      -h, --help              help for copyurl
          --no-clobber        Prevent overwriting file with same name
      -p, --print-filename    Print the resulting name from --auto-filename
          --stdout            Write the output to stdout rather than a file
          --urls              Use a CSV file of links to process multiple URLs

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone cryptcheck

Cryptcheck checks the integrity of an encrypted remote.

Synopsis

Checks a remote against an encrypted remote. This is the equivalent of
running rclone check, but able to check the checksums of the encrypted
remote.

For it to work the underlying remote of the cryptedremote must support
some kind of checksum.

It works by reading the nonce from each file on the cryptedremote: and
using that to encrypt each file on the remote:. It then checks the
checksum of the underlying file on the cryptedremote: against the
checksum of the file it has just encrypted.

Use it like this

    rclone cryptcheck /path/to/files encryptedremote:path

You can use it like this also, but that will involve downloading all the
files in remote:path.

    rclone cryptcheck remote:path encryptedremote:path

After it has run it will log the status of the encryptedremote:.

If you supply the --one-way flag, it will only check that files in the
source match the files in the destination, not the other way around.
This means that extra files in the destination that are not in the
source will not be detected.

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The default number of parallel checks is 8. See the --checkers option
for more information.

    rclone cryptcheck remote:path cryptedremote:path [flags]

Options

          --combined string         Make a combined report of changes to this file
          --differ string           Report all non-matching files to this file
          --error string            Report all files with errors (hashing or reading) to this file
      -h, --help                    help for cryptcheck
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
          --one-way                 Check one way only, source files must exist on remote

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Check Options

Flags used for check commands

          --max-backlog int   Maximum number of objects in sync or check backlog (default 10000)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone cryptdecode

Cryptdecode returns unencrypted file names.

Synopsis

Returns unencrypted file names when provided with a list of encrypted
file names. List limit is 10 items.

If you supply the --reverse flag, it will return encrypted file names.

use it like this

    rclone cryptdecode encryptedremote: encryptedfilename1 encryptedfilename2
    rclone cryptdecode --reverse encryptedremote: filename1 filename2

Another way to accomplish this is by using the rclone backend encode (or
decode) command. See the documentation on the crypt overlay for more
info.

    rclone cryptdecode encryptedremote: encryptedfilename [flags]

Options

      -h, --help      help for cryptdecode
          --reverse   Reverse cryptdecode, encrypts filenames

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone deletefile

Remove a single file from remote.

Synopsis

Remove a single file from remote. Unlike delete it cannot be used to
remove a directory and it doesn't obey include/exclude filters - if the
specified file exists, it will always be removed.

    rclone deletefile remote:path [flags]

Options

      -h, --help   help for deletefile

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone gendocs

Output markdown docs for rclone to the directory supplied.

Synopsis

This produces markdown docs for the rclone commands to the directory
supplied. These are in a format suitable for hugo to render into the
rclone.org website.

    rclone gendocs output_directory [flags]

Options

      -h, --help   help for gendocs

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone gitannex

Speaks with git-annex over stdin/stdout.

Synopsis

Rclone's gitannex subcommand enables git-annex to store and retrieve
content from an rclone remote. It is meant to be run by git-annex, not
directly by users.

Installation on Linux

1.  Skip this step if your version of git-annex is 10.20240430 or newer.
    Otherwise, you must create a symlink somewhere on your PATH with a
    particular name. This symlink helps git-annex tell rclone it wants
    to run the "gitannex" subcommand.

    Create the helper symlink in "$HOME/bin":

        ln -s "$(realpath rclone)" "$HOME/bin/git-annex-remote-rclone-builtin"

        Verify the new symlink is on your PATH:

        ```console
        which git-annex-remote-rclone-builtin

2.  Add a new remote to your git-annex repo. This new remote will
    connect git-annex with the rclone gitannex subcommand.

    Start by asking git-annex to describe the remote's available
    configuration parameters.

    If you skipped step 1:

        git annex initremote MyRemote type=rclone --whatelse

    If you created a symlink in step 1:

        git annex initremote MyRemote type=external externaltype=rclone-builtin --whatelse

      NOTE: If you're porting an existing git-annex-remote-rclone remote
      to use rclone gitannex, you can probably reuse the configuration
      parameters verbatim without renaming them. Check parameter
      synonyms with --whatelse as shown above.

    The following example creates a new git-annex remote named
    "MyRemote" that will use the rclone remote named "SomeRcloneRemote".
    That rclone remote must be one configured in your rclone.conf file,
    which can be located with rclone config file.

        git annex initremote MyRemote         \
            type=external                     \
            externaltype=rclone-builtin       \
            encryption=none                   \
            rcloneremotename=SomeRcloneRemote \
            rcloneprefix=git-annex-content    \
            rclonelayout=nodir

3.  Before you trust this command with your precious data, be sure to
    test the remote. This command is very new and has not been tested on
    many rclone backends. Caveat emptor!

        git annex testremote MyRemote

Happy annexing!

    rclone gitannex [flags]

Options

      -h, --help   help for gitannex

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone gui

Open the web based GUI.

Synopsis

This command starts an embedded web GUI for rclone and opens it in your
default browser.

This starts an RC API server and a GUI server on separate localhost
ports, generates login credentials automatically unless --no-auth is
specified, and opens the browser already authenticated.

    rclone gui

By default rclone gui serves the web GUI that was embedded into the
rclone binary at build time from https://github.com/rclone/rclone-web/
You can override this by passing a path to either an unpacked GUI
directory or a dist.zip archive (e.g. one downloaded from the rclone-web
releases page):

    rclone gui ./my-dist/
    rclone gui ./dist.zip

This is useful for iterating on the GUI locally without rebuilding
rclone, or for serving a different GUI release than the one embedded.

Use --no-open-browser to skip opening the browser automatically:

    rclone gui --no-open-browser

Use --addr to bind the GUI to a specific address:

    rclone gui --addr localhost:5580

Use --user and --pass to set specific credentials:

    rclone gui --user admin --pass secret

Use --no-auth to disable authentication entirely:

    rclone gui --no-auth

For more help see the GUI docs.

    rclone gui [path] [flags]

Options

          --addr stringArray       IPaddress:Port for the GUI server (default auto-chosen localhost port)
          --api-addr stringArray   IPaddress:Port for the RC API server (default auto-chosen localhost port)
          --enable-metrics         Enable OpenMetrics/Prometheus compatible endpoint at /metrics
      -h, --help                   help for gui
          --no-auth                Don't require auth for the RC API
          --no-open-browser        Skip opening the browser automatically
          --pass string            Password for RC authentication
          --user string            User name for RC authentication

Options shared with other commands are described next. See the global
flags page for global options not listed here.

RC Options

Flags to control the Remote Control API

          --rc                                 Enable the remote control server
          --rc-addr stringArray                IPaddress:Port or :Port to bind server to (default localhost:5572)
          --rc-allow-origin string             Origin which cross-domain request (CORS) can be executed from
          --rc-baseurl string                  Prefix for URLs - leave blank for root
          --rc-cert string                     TLS PEM key (concatenation of certificate and CA certificate)
          --rc-client-ca string                Client certificate authority to verify clients with
          --rc-enable-metrics                  Enable the Prometheus metrics path at the remote control server
          --rc-files string                    Path to local files to serve on the HTTP server
          --rc-htpasswd string                 A htpasswd file - if not provided no authentication is done
          --rc-job-expire-duration Duration    Expire finished async jobs older than this value (default 1m0s)
          --rc-job-expire-interval Duration    Interval to check for expired async jobs (default 10s)
          --rc-key string                      TLS PEM Private key
          --rc-max-header-bytes int            Maximum size of request header (default 4096)
          --rc-min-tls-version string          Minimum TLS version that is acceptable (default "tls1.0")
          --rc-no-auth                         Don't require auth for certain methods
          --rc-pass string                     Password for authentication
          --rc-realm string                    Realm for authentication
          --rc-salt string                     Password hashing salt (default "dlPL2MqE")
          --rc-serve                           Enable the serving of remote objects
          --rc-serve-no-modtime                Don't read the modification time (can speed things up)
          --rc-server-read-timeout Duration    Timeout for server reading data (default 1h0m0s)
          --rc-server-write-timeout Duration   Timeout for server writing data (default 1h0m0s)
          --rc-template string                 User-specified template
          --rc-user string                     User name for authentication
          --rc-user-from-header string         User name from a defined HTTP header
          --rc-web-fetch-url string            URL to fetch the releases for webgui (default "https://api.github.com/repos/rclone/rclone-webui-react/releases/latest")
          --rc-web-gui                         Launch WebGUI on localhost
          --rc-web-gui-force-update            Force update to latest version of web gui
          --rc-web-gui-no-open-browser         Don't open the browser automatically
          --rc-web-gui-update                  Check and update to latest version of web gui

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone hashsum

Produces a hashsum file for all the objects in the path.

Synopsis

Produces a hash file for all the objects in the path using the hash
named. The output is in the same format as the standard md5sum/sha1sum
tool.

By default, the hash is requested from the remote. If the hash is not
supported by the remote, no hash will be returned. With the download
flag, the file will be downloaded from the remote and hashed locally
enabling any hash for any remote.

For the MD5 and SHA1 algorithms there are also dedicated commands,
md5sum and sha1sum.

This command can also hash data received on standard input (stdin), by
not passing a remote:path, or by passing a hyphen as remote:path when
there is data to read (if not, the hyphen will be treated literally, as
a relative path).

Run without a hash to see the list of all supported hashes, e.g.

    $ rclone hashsum
    Supported hashes are:
    - md5
    - sha1
    - whirlpool
    - crc32
    - sha256
    - sha512
    - blake3
    - xxh3
    - xxh128

Then

    rclone hashsum MD5 remote:path

Note that hash names are case insensitive and values are output in lower
case.

    rclone hashsum [<hash> remote:path] [flags]

Options

          --base64               Output base64 encoded hashsum
      -C, --checkfile string     Validate hashes against a given SUM file instead of printing them
          --download             Download the file and hash it locally; if this flag is not specified, the hash is requested from the remote
      -h, --help                 help for hashsum
          --output-file string   Output hashsums to a file rather than the terminal

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone link

Generate public link to file/folder.

Synopsis

Create, retrieve or remove a public link to the given file or folder.

    rclone link remote:path/to/file
    rclone link remote:path/to/folder/
    rclone link --unlink remote:path/to/folder/
    rclone link --expire 1d remote:path/to/file

If you supply the --expire flag, it will set the expiration time
otherwise it will use the default (100 years). Note not all backends
support the --expire flag - if the backend doesn't support it then the
link returned won't expire.

Use the --unlink flag to remove existing public links to the file or
folder. Note not all backends support "--unlink" flag - those that don't
will just ignore it.

If successful, the last line of the output will contain the link. Exact
capabilities depend on the remote, but the link will always by default
be created with the least constraints - e.g. no expiry, no password
protection, accessible without account.

    rclone link remote:path [flags]

Options

          --expire Duration   The amount of time that the link will be valid (default off)
      -h, --help              help for link
          --unlink            Remove existing public link to file/folder

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone listremotes

List all the remotes in the config file and defined in environment
variables.

Synopsis

Lists all the available remotes from the config file, or the remotes
matching an optional filter.

Prints the result in human-readable format by default, and as a simple
list of remote names, or if used with flag --long a tabular format
including the remote names, types and descriptions. Using flag --json
produces machine-readable output instead, which always includes all
attributes - including the source (file or environment).

Result can be filtered by a filter argument which applies to all
attributes, and/or filter flags specific for each attribute. The values
must be specified according to regular rclone filtering pattern syntax.

By default filtering uses non-anchored matching, so --type box also
matches dropbox. Use --exact to match complete values only.

    rclone listremotes [<filter>] [flags]

Options

          --description string   Filter remotes by description
          --exact                Match filter strings exactly instead of using non-anchored glob matching
      -h, --help                 help for listremotes
          --json                 Format output as JSON
          --long                 Show type and description in addition to name
          --name string          Filter remotes by name
          --order-by string      Instructions on how to order the result, e.g. 'type,name=descending'
          --source string        Filter remotes by source, e.g. 'file' or 'environment'
          --type string          Filter remotes by type

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone lsf

List directories and objects in remote:path formatted for parsing.

Synopsis

List the contents of the source path (directories and objects) to
standard output in a form which is easy to parse by scripts. By default
this will just be the names of the objects and directories, one per
line. The directories will have a / suffix.

E.g.

    $ rclone lsf swift:bucket
    bevajer5jef
    canole
    diwogej7
    ferejej3gux/
    fubuwic

Use the --format option to control what gets listed. By default this is
just the path, but you can use these parameters to control the output:

    p - path
    s - size
    t - modification time
    h - hash
    i - ID of object
    o - Original ID of underlying object
    m - MimeType of object if known
    e - encrypted name
    T - tier of storage if known, e.g. "Hot" or "Cool"
    M - Metadata of object in JSON blob format, eg {"key":"value"}

So if you wanted the path, size and modification time, you would use
--format "pst", or maybe --format "tsp" to put the path last.

E.g.

    $ rclone lsf  --format "tsp" swift:bucket
    2016-06-25 18:55:41;60295;bevajer5jef
    2016-06-25 18:55:43;90613;canole
    2016-06-25 18:55:43;94467;diwogej7
    2018-04-26 08:50:45;0;ferejej3gux/
    2016-06-25 18:55:40;37600;fubuwic

If you specify "h" in the format you will get the MD5 hash by default,
use the --hash flag to change which hash you want. Note that this can be
returned as an empty string if it isn't available on the object (and for
directories), "ERROR" if there was an error reading it from the object
and "UNSUPPORTED" if that object does not support that hash type.

For example, to emulate the md5sum command you can use

    rclone lsf -R --hash MD5 --format hp --separator "  " --files-only .

E.g.

    $ rclone lsf -R --hash MD5 --format hp --separator "  " --files-only swift:bucket
    7908e352297f0f530b84a756f188baa3  bevajer5jef
    cd65ac234e6fea5925974a51cdd865cc  canole
    03b5341b4f234b9d984d03ad076bae91  diwogej7
    8fd37c3810dd660778137ac3a66cc06d  fubuwic
    99713e14a4c4ff553acaf1930fad985b  gixacuh7ku

(Though "rclone md5sum ." is an easier way of typing this.)

By default the separator is ";" this can be changed with the --separator
flag. Note that separators aren't escaped in the path so putting it last
is a good strategy.

E.g.

    $ rclone lsf  --separator "," --format "tshp" swift:bucket
    2016-06-25 18:55:41,60295,7908e352297f0f530b84a756f188baa3,bevajer5jef
    2016-06-25 18:55:43,90613,cd65ac234e6fea5925974a51cdd865cc,canole
    2016-06-25 18:55:43,94467,03b5341b4f234b9d984d03ad076bae91,diwogej7
    2018-04-26 08:52:53,0,,ferejej3gux/
    2016-06-25 18:55:40,37600,8fd37c3810dd660778137ac3a66cc06d,fubuwic

You can output in CSV standard format. This will escape things in " if
they contain,

E.g.

    $ rclone lsf --csv --files-only --format ps remote:path
    test.log,22355
    test.sh,449
    "this file contains a comma, in the file name.txt",6

Note that the --absolute parameter is useful for making lists of files
to pass to an rclone copy with the --files-from-raw flag.

For example, to find all the files modified within one day and copy
those only (without traversing the whole directory structure):

    rclone lsf --absolute --files-only --max-age 1d /path/to/local > new_files
    rclone copy --files-from-raw new_files /path/to/local remote:path

The default time format is '2006-01-02 15:04:05'. Other formats can be
specified with the --time-format flag. Examples:

    rclone lsf remote:path --format pt --time-format 'Jan 2, 2006 at 3:04pm (MST)'
    rclone lsf remote:path --format pt --time-format '2006-01-02 15:04:05.000000000'
    rclone lsf remote:path --format pt --time-format '2006-01-02T15:04:05.999999999Z07:00'
    rclone lsf remote:path --format pt --time-format RFC3339
    rclone lsf remote:path --format pt --time-format DateOnly
    rclone lsf remote:path --format pt --time-format max
    rclone lsf remote:path --format pt --time-format unix
    rclone lsf remote:path --format pt --time-format unixnano

--time-format max will automatically truncate
2006-01-02 15:04:05.000000000 to the maximum precision supported by the
remote.

Any of the filtering options can be applied to this command.

There are several related list commands

-   ls to list size and path of objects only
-   lsl to list modification time, size and path of objects only
-   lsd to list directories only
-   lsf to list objects and directories in easy to parse format
-   lsjson to list objects and directories in JSON format

ls,lsl,lsd are designed to be human-readable. lsf is designed to be
human and machine-readable. lsjson is designed to be machine-readable.

Note that ls and lsl recurse by default - use --max-depth 1 to stop the
recursion.

The other list commands lsd,lsf,lsjson do not recurse by default - use
-R to make them recurse.

List commands prefer a recursive method that uses more memory but fewer
transactions by default. Use --disable ListR to suppress the behavior.
See --fast-list for more details.

Listing a nonexistent directory will produce an error except for remotes
which can't have empty directories (e.g. s3, swift, or gcs - the
bucket-based remotes).

    rclone lsf remote:path [flags]

Options

          --absolute             Put a leading / in front of path names
          --csv                  Output in CSV format
      -d, --dir-slash            Append a slash to directory names (default true)
          --dirs-only            Only list directories
          --files-only           Only list files
      -F, --format string        Output format - see  help for details (default "p")
          --hash h               Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "md5")
      -h, --help                 help for lsf
      -R, --recursive            Recurse into the listing
      -s, --separator string     Separator for the items in the format (default ";")
      -t, --time-format string   Specify a custom time format - see docs for details (default: 2006-01-02 15:04:05)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone lsjson

List directories and objects in the path in JSON format.

Synopsis

List directories and objects in the path in JSON format.

The output is an array of Items, where each Item looks like this:

    {
      "Hashes" : {
        "SHA-1" : "f572d396fae9206628714fb2ce00f72e94f2258f",
        "MD5" : "b1946ac92492d2347c6235b4d2611184",
        "DropboxHash" : "ecb65bb98f9d905b70458986c39fcbad7715e5f2fcc3b1f07767d7c83e2438cc"
      },
      "ID": "y2djkhiujf83u33",
      "OrigID": "UYOJVTUW00Q1RzTDA",
      "IsBucket" : false,
      "IsDir" : false,
      "MimeType" : "application/octet-stream",
      "ModTime" : "2017-05-31T16:15:57.034468261+01:00",
      "Name" : "file.txt",
      "Encrypted" : "v0qpsdq8anpci8n929v3uu9338",
      "EncryptedPath" : "kja9098349023498/v0qpsdq8anpci8n929v3uu9338",
      "Path" : "full/path/goes/here/file.txt",
      "Size" : 6,
      "Tier" : "hot",
    }

The exact set of properties included depends on the backend:

-   The property IsBucket will only be included for bucket-based
    remotes, and only for directories that are buckets. It will always
    be omitted when value is not true.
-   Properties Encrypted and EncryptedPath will only be included for
    encrypted remotes, and (as mentioned below) only if the --encrypted
    option is set.

Different options may also affect which properties are included:

-   If --hash is not specified, the Hashes property will be omitted. The
    types of hash can be specified with the --hash-type parameter (which
    may be repeated). If --hash-type is set then it implies --hash.
-   If --no-modtime is specified then ModTime will be blank. This can
    speed things up on remotes where reading the ModTime takes an extra
    request (e.g. s3, swift).
-   If --no-mimetype is specified then MimeType will be blank. This can
    speed things up on remotes where reading the MimeType takes an extra
    request (e.g. s3, swift).
-   If --encrypted is not specified the Encrypted and EncryptedPath
    properties will be omitted - even for encrypted remotes.
-   If --metadata is set then an additional Metadata property will be
    returned. This will have metadata in rclone standard format as a
    JSON object.

The default is to list directories and files/objects, but this can be
changed with the following options:

-   If --dirs-only is specified then directories will be returned only,
    no files/objects.
-   If --files-only is specified then files will be returned only, no
    directories.

If --stat is set then the output is not an array of items, but instead a
single JSON blob will be returned about the item pointed to. This will
return an error if the item isn't found, however on bucket based
backends (like s3, gcs, b2, azureblob etc) if the item isn't found it
will return an empty directory, as it isn't possible to tell empty
directories from missing directories there.

The Path field will only show folders below the remote path being
listed. If "remote:path" contains the file "subfolder/file.txt", the
Path for "file.txt" will be "subfolder/file.txt", not
"remote:path/subfolder/file.txt". When used without --recursive the Path
will always be the same as Name.

The time is in RFC3339 format with up to nanosecond precision. The
number of decimal digits in the seconds will depend on the precision
that the remote can hold the times, so if times are accurate to the
nearest millisecond (e.g. Google Drive) then 3 digits will always be
shown ("2017-05-31T16:15:57.034+01:00") whereas if the times are
accurate to the nearest second (Dropbox, Box, WebDav, etc.) no digits
will be shown ("2017-05-31T16:15:57+01:00").

The whole output can be processed as a JSON blob, or alternatively it
can be processed line by line as each item is written on individual
lines (except with --stat).

Any of the filtering options can be applied to this command.

There are several related list commands

-   ls to list size and path of objects only
-   lsl to list modification time, size and path of objects only
-   lsd to list directories only
-   lsf to list objects and directories in easy to parse format
-   lsjson to list objects and directories in JSON format

ls,lsl,lsd are designed to be human-readable. lsf is designed to be
human and machine-readable. lsjson is designed to be machine-readable.

Note that ls and lsl recurse by default - use --max-depth 1 to stop the
recursion.

The other list commands lsd,lsf,lsjson do not recurse by default - use
-R to make them recurse.

List commands prefer a recursive method that uses more memory but fewer
transactions by default. Use --disable ListR to suppress the behavior.
See --fast-list for more details.

Listing a nonexistent directory will produce an error except for remotes
which can't have empty directories (e.g. s3, swift, or gcs - the
bucket-based remotes).

    rclone lsjson remote:path [flags]

Options

          --dirs-only               Show only directories in the listing
          --encrypted               Show the encrypted names
          --files-only              Show only files in the listing
          --hash                    Include hashes in the output (may take longer)
          --hash-type stringArray   Show only this hash type (may be repeated)
      -h, --help                    help for lsjson
      -M, --metadata                Add metadata to the listing
          --no-mimetype             Don't read the mime type (can speed things up)
          --no-modtime              Don't read the modification time (can speed things up)
          --original                Show the ID of the underlying Object
      -R, --recursive               Recurse into the listing
          --stat                    Just return the info for the pointed to file

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone mount

Mount the remote as file system on a mountpoint.

Synopsis

Rclone mount allows Linux, FreeBSD, macOS and Windows to mount any of
Rclone's cloud storage systems as a file system with FUSE.

First set up your remote using rclone config. Check it works with
rclone ls etc.

On Linux and macOS, you can run mount in either foreground or background
(aka daemon) mode. Mount runs in foreground mode by default. Use the
--daemon flag to force background mode. On Windows you can run mount in
foreground only, the flag is ignored.

In background mode rclone acts as a generic Unix mount program: the main
program starts, spawns background rclone process to setup and maintain
the mount, waits until success or timeout and exits with appropriate
code (killing the child process if it fails).

On Linux/macOS/FreeBSD start the mount like this, where
/path/to/local/mount is an empty existing directory:

    rclone mount remote:path/to/files /path/to/local/mount

On Windows you can start a mount in different ways. See below for
details. If foreground mount is used interactively from a console
window, rclone will serve the mount and occupy the console so another
window should be used to work with the mount until rclone is interrupted
e.g. by pressing Ctrl-C.

The following examples will mount to an automatically assigned drive, to
specific drive letter X:, to path C:\path\parent\mount (where parent
directory or drive must exist, and mount must not exist, and is not
supported when mounting as a network drive), and the last example will
mount as network share \\cloud\remote and map it to an automatically
assigned drive:

    rclone mount remote:path/to/files *
    rclone mount remote:path/to/files X:
    rclone mount remote:path/to/files C:\path\parent\mount
    rclone mount remote:path/to/files \\cloud\remote

When the program ends while in foreground mode, either via Ctrl+C or
receiving a SIGINT or SIGTERM signal, the mount should be automatically
stopped.

When running in background mode the user will have to stop the mount
manually:

    # Linux
    fusermount -u /path/to/local/mount
    #... or on some systems
    fusermount3 -u /path/to/local/mount
    # OS X or Linux when using nfsmount
    umount /path/to/local/mount

The umount operation can fail, for example when the mountpoint is busy.
When that happens, it is the user's responsibility to stop the mount
manually.

The size of the mounted file system will be set according to information
retrieved from the remote, the same as returned by the rclone about
command. Remotes with unlimited storage may report the used size only,
then an additional 1 PiB of free space is assumed. If the remote does
not support the about feature at all, then 1 PiB is set as both the
total and the free size.

Installing on Windows

To run rclone mount on Windows, you will need to download and install
WinFsp.

WinFsp is an open-source Windows File System Proxy which makes it easy
to write user space file systems for Windows. It provides a FUSE
emulation layer which rclone uses combination with cgofuse. Both of
these packages are by Bill Zissimopoulos who was very helpful during the
implementation of rclone mount for Windows.

Mounting modes on windows

Unlike other operating systems, Microsoft Windows provides a different
filesystem type for network and fixed drives. It optimises access on the
assumption fixed disk drives are fast and reliable, while network drives
have relatively high latency and less reliability. Some settings can
also be differentiated between the two types, for example that Windows
Explorer should just display icons and not create preview thumbnails for
image and video files on network drives.

In most cases, rclone will mount the remote as a normal, fixed disk
drive by default. However, you can also choose to mount it as a remote
network drive, often described as a network share. If you mount an
rclone remote using the default, fixed drive mode and experience
unexpected program errors, freezes or other issues, consider mounting as
a network drive instead.

When mounting as a fixed disk drive you can either mount to an unused
drive letter, or to a path representing a nonexistent subdirectory of an
existing parent directory or drive. Using the special value * will tell
rclone to automatically assign the next available drive letter, starting
with Z: and moving backward. Examples:

    rclone mount remote:path/to/files *
    rclone mount remote:path/to/files X:
    rclone mount remote:path/to/files C:\path\parent\mount
    rclone mount remote:path/to/files X:

Option --volname can be used to set a custom volume name for the mounted
file system. The default is to use the remote name and path.

To mount as network drive, you can add option --network-mode to your
mount command. Mounting to a directory path is not supported in this
mode, it is a limitation Windows imposes on junctions, so the remote
must always be mounted to a drive letter.

    rclone mount remote:path/to/files X: --network-mode

A volume name specified with --volname will be used to create the
network share path. A complete UNC path, such as \\cloud\remote,
optionally with path \\cloud\remote\madeup\path, will be used as is. Any
other string will be used as the share part, after a default prefix
\\server\. If no volume name is specified then \\server\share will be
used. You must make sure the volume name is unique when you are mounting
more than one drive, or else the mount command will fail. The share name
will treated as the volume label for the mapped drive, shown in Windows
Explorer etc, while the complete \\server\share will be reported as the
remote UNC path by net use etc, just like a normal network drive
mapping.

If you specify a full network share UNC path with --volname, this will
implicitly set the --network-mode option, so the following two examples
have same result:

    rclone mount remote:path/to/files X: --network-mode
    rclone mount remote:path/to/files X: --volname \\server\share

You may also specify the network share UNC path as the mountpoint
itself. Then rclone will automatically assign a drive letter, same as
with * and use that as mountpoint, and instead use the UNC path
specified as the volume name, as if it were specified with the --volname
option. This will also implicitly set the --network-mode option. This
means the following two examples have same result:

    rclone mount remote:path/to/files \\cloud\remote
    rclone mount remote:path/to/files * --volname \\cloud\remote

There is yet another way to enable network mode, and to set the share
path, and that is to pass the "native" libfuse/WinFsp option directly:
--fuse-flag --VolumePrefix=\server\share. Note that the path must be
with just a single backslash prefix in this case.

Note: In previous versions of rclone this was the only supported method.

Read more about drive mapping

See also Limitations section below.

Windows filesystem permissions

The FUSE emulation layer on Windows must convert between the POSIX-based
permission model used in FUSE, and the permission model used in Windows,
based on access-control lists (ACL).

The mounted filesystem will normally get three entries in its
access-control list (ACL), representing permissions for the POSIX
permission scopes: Owner, group and others. By default, the owner and
group will be taken from the current user, and the built-in group
"Everyone" will be used to represent others. The user/group can be
customized with FUSE options "UserName" and "GroupName", e.g.
-o UserName=user123 -o GroupName="Authenticated Users". The permissions
on each entry will be set according to options --dir-perms and
--file-perms, which takes a value in traditional Unix numeric notation.

The default permissions corresponds to
--file-perms 0666 --dir-perms 0777, i.e. read and write permissions to
everyone. This means you will not be able to start any programs from the
mount. To be able to do that you must add execute permissions, e.g.
--file-perms 0777 --dir-perms 0777 to add it to everyone. If the program
needs to write files, chances are you will have to enable VFS File
Caching as well (see also limitations). Note that the default write
permission have some restrictions for accounts other than the owner,
specifically it lacks the "write extended attributes", as explained
next.

The mapping of permissions is not always trivial, and the result you see
in Windows Explorer may not be exactly like you expected. For example,
when setting a value that includes write access for the group or others
scope, this will be mapped to individual permissions "write attributes",
"write data" and "append data", but not "write extended attributes".
Windows will then show this as basic permission "Special" instead of
"Write", because "Write" also covers the "write extended attributes"
permission. When setting digit 0 for group or others, to indicate no
permissions, they will still get individual permissions "read
attributes", "read extended attributes" and "read permissions". This is
done for compatibility reasons, e.g. to allow users without additional
permissions to be able to read basic metadata about files like in Unix.

WinFsp 2021 (version 1.9) introduced a new FUSE option "FileSecurity",
that allows the complete specification of file security descriptors
using SDDL. With this you get detailed control of the resulting
permissions, compared to use of the POSIX permissions described above,
and no additional permissions will be added automatically for
compatibility with Unix. Some example use cases will following.

If you set POSIX permissions for only allowing access to the owner,
using --file-perms 0600 --dir-perms 0700, the user group and the
built-in "Everyone" group will still be given some special permissions,
as described above. Some programs may then (incorrectly) interpret this
as the file being accessible by everyone, for example an SSH client may
warn about "unprotected private key file". You can work around this by
specifying -o FileSecurity="D:P(A;;FA;;;OW)", which sets file all access
(FA) to the owner (OW), and nothing else.

When setting write permissions then, except for the owner, this does not
include the "write extended attributes" permission, as mentioned above.
This may prevent applications from writing to files, giving permission
denied error instead. To set working write permissions for the built-in
"Everyone" group, similar to what it gets by default but with the
addition of the "write extended attributes", you can specify
-o FileSecurity="D:P(A;;FRFW;;;WD)", which sets file read (FR) and file
write (FW) to everyone (WD). If file execute (FX) is also needed, then
change to -o FileSecurity="D:P(A;;FRFWFX;;;WD)", or set file all access
(FA) to get full access permissions, including delete, with
-o FileSecurity="D:P(A;;FA;;;WD)".

Windows caveats

Drives created as Administrator are not visible to other accounts, not
even an account that was elevated to Administrator with the User Account
Control (UAC) feature. A result of this is that if you mount to a drive
letter from a Command Prompt run as Administrator, and then try to
access the same drive from Windows Explorer (which does not run as
Administrator), you will not be able to see the mounted drive.

If you don't need to access the drive from applications running with
administrative privileges, the easiest way around this is to always
create the mount from a non-elevated command prompt.

To make mapped drives available to the user account that created them
regardless if elevated or not, there is a special Windows setting called
linked connections that can be enabled.

It is also possible to make a drive mount available to everyone on the
system, by running the process creating it as the built-in SYSTEM
account. There are several ways to do this: One is to use the
command-line utility PsExec, from Microsoft's Sysinternals suite, which
has option -s to start processes as the SYSTEM account. Another
alternative is to run the mount command from a Windows Scheduled Task,
or a Windows Service, configured to run as the SYSTEM account. A third
alternative is to use the WinFsp.Launcher infrastructure). Read more in
the install documentation. Note that when running rclone as another
user, it will not use the configuration file from your profile unless
you tell it to with the --config option. Note also that it is now the
SYSTEM account that will have the owner permissions, and other accounts
will have permissions according to the group or others scopes. As
mentioned above, these will then not get the "write extended attributes"
permission, and this may prevent writing to files. You can work around
this with the FileSecurity option, see example above.

Note that mapping to a directory path, instead of a drive letter, does
not suffer from the same limitations.

Mounting on macOS

Mounting on macOS can be done either via built-in NFS server, macFUSE
(also known as osxfuse) or FUSE-T. macFUSE is a traditional FUSE driver
utilizing a macOS kernel extension (kext). FUSE-T is an alternative FUSE
system which "mounts" via an NFSv4 local server.

Unicode Normalization

It is highly recommended to keep the default of
--no-unicode-normalization=false for all mount and serve commands on
macOS. For details, see vfs-case-sensitivity.

NFS mount

This method spins up an NFS server using serve nfs command and mounts it
to the specified mountpoint. If you run this in background mode using
|--daemon|, you will need to send SIGTERM signal to the rclone process
using |kill| command to stop the mount.

Note that --nfs-cache-handle-limit controls the maximum number of cached
file handles stored by the nfsmount caching handler. This should not be
set too low or you may experience errors when trying to access files.
The default is 1000000, but consider lowering this limit if the server's
system resource usage causes problems.

macFUSE Notes

If installing macFUSE using dmg packages from the website, rclone will
locate the macFUSE libraries without any further intervention. If
however, macFUSE is installed using the macports package manager, the
following addition steps are required.

    sudo mkdir /usr/local/lib
    cd /usr/local/lib
    sudo ln -s /opt/local/lib/libfuse.2.dylib

FUSE-T Limitations, Caveats, and Notes

There are some limitations, caveats, and notes about how it works. These
are current as of FUSE-T version 1.0.14.

ModTime update on read

As per the FUSE-T wiki:

  File access and modification times cannot be set separately as it
  seems to be an issue with the NFS client which always modifies both.
  Can be reproduced with touch -m and touch -a commands

This means that viewing files with various tools, notably macOS Finder,
will cause rlcone to update the modification time of the file. This may
make rclone upload a full new copy of the file.

Read Only mounts

When mounting with --read-only, attempts to write to files will fail
silently as opposed to with a clear warning as in macFUSE.

Mounting on Linux

On newer versions of Ubuntu, you may encounter the following error when
running rclone mount:

  NOTICE: mount helper error: fusermount3: mount failed: Permission
  denied CRITICAL: Fatal error: failed to mount FUSE fs: fusermount:
  exit status 1

This may be due to newer Apparmor restrictions, which can be disabled
with sudo aa-disable /usr/bin/fusermount3 (you may need to
sudo apt install apparmor-utils beforehand).

Limitations

Without the use of --vfs-cache-mode this can only write files
sequentially, it can only seek when reading. This means that many
applications won't work with their files on an rclone mount without
--vfs-cache-mode writes or --vfs-cache-mode full. See the VFS File
Caching section for more info. When using NFS mount on macOS, if you
don't specify |--vfs-cache-mode| the mount point will be read-only.

Bucket-based remotes - Azure Blob, Swift, S3, Google Cloud Storage and
B2 - can't store empty directories. Of these, only Azure Blob, Google
Cloud Storage and S3 can preserve them when you add
--xxx-directory_markers; otherwise, empty directories will vanish once
they drop out of the directory cache.

When rclone mount is invoked on Unix with --daemon flag, the main rclone
program will wait for the background mount to become ready or until the
timeout specified by the --daemon-wait flag. On Linux it can check mount
status using ProcFS so the flag in fact sets maximum time to wait, while
the real wait can be less. On macOS / BSD the time to wait is constant
and the check is performed only at the end. We advise you to set wait
time on macOS reasonably.

Only supported on Linux, FreeBSD, OS X and Windows at the moment.

rclone mount vs rclone sync/copy

File systems expect things to be 100% reliable, whereas cloud storage
systems are a long way from 100% reliable. The rclone sync/copy commands
cope with this with lots of retries. However rclone mount can't use
retries in the same way without making local copies of the uploads. Look
at the VFS File Caching for solutions to make mount more reliable.

Attribute caching

You can use the flag --attr-timeout to set the time the kernel caches
the attributes (size, modification time, etc.) for directory entries.

The default is 1s which caches files just long enough to avoid too many
callbacks to rclone from the kernel.

In theory 0s should be the correct value for filesystems which can
change outside the control of the kernel. However this causes quite a
few problems such as rclone using too much memory, rclone not serving
files to samba and excessive time listing directories.

The kernel can cache the info about a file for the time given by
--attr-timeout. You may see corruption if the remote file changes length
during this window. It will show up as either a truncated file or a file
with garbage on the end. With --attr-timeout 1s this is very unlikely
but not impossible. The higher you set --attr-timeout the more likely it
is. The default setting of "1s" is the lowest setting which mitigates
the problems above.

If you set it higher (10s or 1m say) then the kernel will call back to
rclone less often making it more efficient, however there is more chance
of the corruption issue above.

If files don't change on the remote outside of the control of rclone
then there is no chance of corruption.

This is the same as setting the attr_timeout option in mount.fuse.

Filters

Note that all the rclone filters can be used to select a subset of the
files to be visible in the mount.

systemd

When running rclone mount as a systemd service, it is possible to use
Type=notify. In this case the service will enter the started state after
the mountpoint has been successfully set up. Units having the rclone
mount service specified as a requirement will see all files and folders
immediately in this mode.

Note that systemd runs mount units without any environment variables
including PATH or HOME. This means that tilde (~) expansion will not
work and you should provide --config and --cache-dir explicitly as
absolute paths via rclone arguments. Since mounting requires the
fusermount or fusermount3 program, rclone will use the fallback PATH of
/bin:/usr/bin in this scenario. Please ensure that
fusermount/fusermount3 is present on this PATH.

Rclone as Unix mount helper

The core Unix program /bin/mount normally takes the -t FSTYPE argument
then runs the /sbin/mount.FSTYPE helper program passing it mount options
as -o key=val,... or --opt=.... Automount (classic or systemd) behaves
in a similar way.

rclone by default expects GNU-style flags --key val. To run it as a
mount helper you should symlink rclone binary to /sbin/mount.rclone and
optionally /usr/bin/rclonefs, e.g.
ln -s /usr/bin/rclone /sbin/mount.rclone. rclone will detect it and
translate command-line arguments appropriately.

Now you can run classic mounts like this:

    mount sftp1:subdir /mnt/data -t rclone -o vfs_cache_mode=writes,sftp_key_file=/path/to/pem

or create systemd mount units:

    # /etc/systemd/system/mnt-data.mount
    [Unit]
    Description=Mount for /mnt/data
    [Mount]
    Type=rclone
    What=sftp1:subdir
    Where=/mnt/data
    Options=rw,_netdev,allow_other,args2env,vfs-cache-mode=writes,config=/etc/rclone.conf,cache-dir=/var/rclone

optionally accompanied by systemd automount unit

    # /etc/systemd/system/mnt-data.automount
    [Unit]
    Description=AutoMount for /mnt/data
    [Automount]
    Where=/mnt/data
    TimeoutIdleSec=600
    [Install]
    WantedBy=multi-user.target

or add in /etc/fstab a line like

    sftp1:subdir /mnt/data rclone rw,noauto,nofail,_netdev,x-systemd.automount,args2env,vfs_cache_mode=writes,config=/etc/rclone.conf,cache_dir=/var/cache/rclone 0 0

or use classic Automountd. Remember to provide explicit
config=...,cache-dir=... as a workaround for mount units being run
without HOME.

Rclone in the mount helper mode will split -o argument(s) by comma,
replace _ by - and prepend -- to get the command-line flags. Options
containing commas or spaces can be wrapped in single or double quotes.
Any inner quotes inside outer quotes of the same type should be doubled.

Mount option syntax includes a few extra options treated specially:

-   env.NAME=VALUE will set an environment variable for the mount
    process. This helps with Automountd and Systemd.mount which don't
    allow setting custom environment for mount helpers. Typically you
    will use env.HTTPS_PROXY=proxy.host:3128 or env.HOME=/root
-   command=cmount can be used to run cmount or any other rclone command
    rather than the default mount.
-   args2env will pass mount options to the mount helper running in
    background via environment variables instead of command line
    arguments. This allows to hide secrets from such commands as ps or
    pgrep.
-   vv... will be transformed into appropriate --verbose=N
-   standard mount options like x-systemd.automount, _netdev, nosuid and
    alike are intended only for Automountd and ignored by rclone.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

    rclone mount remote:path /path/to/mountpoint [flags]

Options

          --allow-non-empty                        Allow mounting over a non-empty directory (not supported on Windows)
          --allow-other                            Allow access to other users (not supported on Windows)
          --allow-root                             Allow access to root user (not supported on Windows)
          --async-read                             Use asynchronous reads (not supported on Windows) (default true)
          --attr-timeout Duration                  Time for which file/directory attributes are cached (default 1s)
          --daemon                                 Run mount in background and exit parent process (as background output is suppressed, use --log-file with --log-format=pid,... to monitor) (not supported on Windows)
          --daemon-timeout Duration                Time limit for rclone to respond to kernel (not supported on Windows) (default 0s)
          --daemon-wait Duration                   Time to wait for ready mount from daemon (maximum time on Linux, constant sleep time on OSX/BSD) (not supported on Windows) (default 1m0s)
          --debug-fuse                             Debug the FUSE internals - needs -v
          --default-permissions                    Makes kernel enforce access control based on the file mode (not supported on Windows)
          --devname string                         Set the device name - default is remote:path
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --direct-io                              Use Direct IO, disables caching of data
          --file-perms FileMode                    File permissions (default 666)
          --fuse-flag stringArray                  Flags or arguments to be passed direct to libfuse/WinFsp (repeat if required)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for mount
          --link-perms FileMode                    Link permissions (default 666)
          --max-read-ahead SizeSuffix              The number of bytes that can be prefetched for sequential reads (not supported on Windows) (default 128Ki)
          --mount-case-insensitive Tristate        Tell the OS the mount is case insensitive (true) or sensitive (false) regardless of the backend (auto) (default unset)
          --network-mode                           Mount as remote network drive, instead of fixed disk drive (supported on Windows only)
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --noappledouble                          Ignore Apple Double (._) and .DS_Store files (supported on OSX only) (default true)
          --noapplexattr                           Ignore all "com.apple.*" extended attributes (supported on OSX only)
      -o, --option stringArray                     Option for libfuse/WinFsp (repeat if required)
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)
          --volname string                         Set the volume name (supported on Windows and OSX only)
          --write-back-cache                       Makes kernel buffer writes before sending them to rclone (without this, writethrough caching is used) (not supported on Windows)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone moveto

Move file or directory from source to dest.

Synopsis

If source:path is a file or directory then it moves it to a file or
directory named dest:path.

This can be used to rename files or upload single files to other than
their existing name. If the source is a directory then it acts exactly
like the move command.

So

    rclone moveto src dst

where src and dst are rclone paths, either remote:path or /path/to/local
or C:.

This will:

    if src is file
        move it to dst, overwriting an existing file if it exists
    if src is directory
        move it to dst, overwriting existing files if they exist
        see move command for full details

This doesn't transfer files that are identical on src and dst, testing
by size and modification time or MD5SUM. src will be deleted on
successful transfer.

Important: Since this can cause data loss, test first with the --dry-run
or the --interactive/-i flag.

Note: Use the -P/--progress flag to view real-time transfer statistics.

Logger Flags

The --differ, --missing-on-dst, --missing-on-src, --match and --error
flags write paths, one per line, to the file name (or stdout if it is -)
supplied. What they write is described in the help below. For example
--differ will write all paths which are present on both the source and
destination but different.

The --combined flag will write a file (or stdout) which contains all
file paths with a symbol and then a space and then the path to tell you
what happened to it. These are reminiscent of diff files.

-   = path means path was found in source and destination and was
    identical
-   - path means path was missing on the source, so only in the
    destination
-   + path means path was missing on the destination, so only in the
    source
-   * path means path was present in source and destination but
    different.
-   ! path means there was an error reading or hashing the source or
    dest.

The --dest-after flag writes a list file using the same format flags as
lsf (including customizable options for hash, modtime, etc.)
Conceptually it is similar to rsync's --itemize-changes, but not
identical -- it should output an accurate list of what will be on the
destination after the command is finished.

When the --no-traverse flag is set, all logs involving files that exist
only on the destination will be incomplete or completely missing.

Note that these logger flags have a few limitations, and certain
scenarios are not currently supported:

-   --max-duration / CutoffModeHard
-   --compare-dest / --copy-dest
-   server-side moves of an entire dir at once
-   High-level retries, because there would be duplicates (use
    --retries 1 to disable)
-   Possibly some unusual error scenarios

Note also that each file is logged during execution, as opposed to
after, so it is most useful as a predictor of what SHOULD happen to each
file (which may or may not match what actually DID).

    rclone moveto source:path dest:path [flags]

Options

          --absolute                Put a leading / in front of path names
          --combined string         Make a combined report of changes to this file
          --csv                     Output in CSV format
          --dest-after string       Report all files that exist on the dest post-sync
          --differ string           Report all non-matching files to this file
      -d, --dir-slash               Append a slash to directory names (default true)
          --dirs-only               Only list directories
          --error string            Report all files with errors (hashing or reading) to this file
          --files-only              Only list files (default true)
      -F, --format string           Output format - see lsf help for details (default "p")
          --hash h                  Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "md5")
      -h, --help                    help for moveto
          --match string            Report all matching files to this file
          --missing-on-dst string   Report all files missing from the destination to this file
          --missing-on-src string   Report all files missing from the source to this file
      -s, --separator string        Separator for the items in the format (default ";")
      -t, --timeformat string       Specify a custom time format - see docs for details (default: 2006-01-02 15:04:05)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Copy Options

Flags for anything which can copy a file

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone ncdu

Explore a remote with a text based user interface.

Synopsis

This displays a text based user interface allowing the navigation of a
remote. It is most useful for answering the question - "What is using
all my disk space?".

To make the user interface it first scans the entire remote given and
builds an in memory representation. rclone ncdu can be used during this
scanning phase and you will see it building up the directory structure
as it goes along.

You can interact with the user interface using key presses, press '?' to
toggle the help on and off. The supported keys are:

     ↑,↓ or k,j to Move
     →,l to enter
     ←,h to return
     g toggle graph
     c toggle counts
     a toggle average size in directory
     m toggle modified time
     u toggle human-readable format
     n,s,C,A,M sort by name,size,count,asize,mtime
     d delete file/directory
     v select file/directory
     V enter visual select mode
     D delete selected files/directories
     y copy current path to clipboard
     Y display current path
     ^L refresh screen (fix screen corruption)
     r recalculate file sizes
     ? to toggle help on and off
     ESC to close the menu box
     q/^c to quit

Listed files/directories may be prefixed by a one-character flag, some
of them combined with a description in brackets at end of line. These
flags have the following meaning:

    e means this is an empty directory, i.e. contains no files (but
      may contain empty subdirectories)
    ~ means this is a directory where some of the files (possibly in
      subdirectories) have unknown size, and therefore the directory
      size may be underestimated (and average size inaccurate, as it
      is average of the files with known sizes).
    . means an error occurred while reading a subdirectory, and
      therefore the directory size may be underestimated (and average
      size inaccurate)
    ! means an error occurred while reading this directory

This an homage to the ncdu tool but for rclone remotes. It is missing
lots of features at the moment but is useful as it stands. Unlike ncdu
it does not show excluded files.

Note that it might take some time to delete big files/directories. The
UI won't respond in the meantime since the deletion is done
synchronously.

For a non-interactive listing of the remote, see the tree command. To
just get the total size of the remote you can also use the size command.

    rclone ncdu remote:path [flags]

Options

      -h, --help   help for ncdu

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone nfsmount

Mount the remote as file system on a mountpoint.

Synopsis

Rclone nfsmount allows Linux, FreeBSD, macOS and Windows to mount any of
Rclone's cloud storage systems as a file system with FUSE.

First set up your remote using rclone config. Check it works with
rclone ls etc.

On Linux and macOS, you can run mount in either foreground or background
(aka daemon) mode. Mount runs in foreground mode by default. Use the
--daemon flag to force background mode. On Windows you can run mount in
foreground only, the flag is ignored.

In background mode rclone acts as a generic Unix mount program: the main
program starts, spawns background rclone process to setup and maintain
the mount, waits until success or timeout and exits with appropriate
code (killing the child process if it fails).

On Linux/macOS/FreeBSD start the mount like this, where
/path/to/local/mount is an empty existing directory:

    rclone nfsmount remote:path/to/files /path/to/local/mount

On Windows you can start a mount in different ways. See below for
details. If foreground mount is used interactively from a console
window, rclone will serve the mount and occupy the console so another
window should be used to work with the mount until rclone is interrupted
e.g. by pressing Ctrl-C.

The following examples will mount to an automatically assigned drive, to
specific drive letter X:, to path C:\path\parent\mount (where parent
directory or drive must exist, and mount must not exist, and is not
supported when mounting as a network drive), and the last example will
mount as network share \\cloud\remote and map it to an automatically
assigned drive:

    rclone nfsmount remote:path/to/files *
    rclone nfsmount remote:path/to/files X:
    rclone nfsmount remote:path/to/files C:\path\parent\mount
    rclone nfsmount remote:path/to/files \\cloud\remote

When the program ends while in foreground mode, either via Ctrl+C or
receiving a SIGINT or SIGTERM signal, the mount should be automatically
stopped.

When running in background mode the user will have to stop the mount
manually:

    # Linux
    fusermount -u /path/to/local/mount
    #... or on some systems
    fusermount3 -u /path/to/local/mount
    # OS X or Linux when using nfsmount
    umount /path/to/local/mount

The umount operation can fail, for example when the mountpoint is busy.
When that happens, it is the user's responsibility to stop the mount
manually.

The size of the mounted file system will be set according to information
retrieved from the remote, the same as returned by the rclone about
command. Remotes with unlimited storage may report the used size only,
then an additional 1 PiB of free space is assumed. If the remote does
not support the about feature at all, then 1 PiB is set as both the
total and the free size.

Installing on Windows

To run rclone nfsmount on Windows, you will need to download and install
WinFsp.

WinFsp is an open-source Windows File System Proxy which makes it easy
to write user space file systems for Windows. It provides a FUSE
emulation layer which rclone uses combination with cgofuse. Both of
these packages are by Bill Zissimopoulos who was very helpful during the
implementation of rclone nfsmount for Windows.

Mounting modes on windows

Unlike other operating systems, Microsoft Windows provides a different
filesystem type for network and fixed drives. It optimises access on the
assumption fixed disk drives are fast and reliable, while network drives
have relatively high latency and less reliability. Some settings can
also be differentiated between the two types, for example that Windows
Explorer should just display icons and not create preview thumbnails for
image and video files on network drives.

In most cases, rclone will mount the remote as a normal, fixed disk
drive by default. However, you can also choose to mount it as a remote
network drive, often described as a network share. If you mount an
rclone remote using the default, fixed drive mode and experience
unexpected program errors, freezes or other issues, consider mounting as
a network drive instead.

When mounting as a fixed disk drive you can either mount to an unused
drive letter, or to a path representing a nonexistent subdirectory of an
existing parent directory or drive. Using the special value * will tell
rclone to automatically assign the next available drive letter, starting
with Z: and moving backward. Examples:

    rclone nfsmount remote:path/to/files *
    rclone nfsmount remote:path/to/files X:
    rclone nfsmount remote:path/to/files C:\path\parent\mount
    rclone nfsmount remote:path/to/files X:

Option --volname can be used to set a custom volume name for the mounted
file system. The default is to use the remote name and path.

To mount as network drive, you can add option --network-mode to your
nfsmount command. Mounting to a directory path is not supported in this
mode, it is a limitation Windows imposes on junctions, so the remote
must always be mounted to a drive letter.

    rclone nfsmount remote:path/to/files X: --network-mode

A volume name specified with --volname will be used to create the
network share path. A complete UNC path, such as \\cloud\remote,
optionally with path \\cloud\remote\madeup\path, will be used as is. Any
other string will be used as the share part, after a default prefix
\\server\. If no volume name is specified then \\server\share will be
used. You must make sure the volume name is unique when you are mounting
more than one drive, or else the mount command will fail. The share name
will treated as the volume label for the mapped drive, shown in Windows
Explorer etc, while the complete \\server\share will be reported as the
remote UNC path by net use etc, just like a normal network drive
mapping.

If you specify a full network share UNC path with --volname, this will
implicitly set the --network-mode option, so the following two examples
have same result:

    rclone nfsmount remote:path/to/files X: --network-mode
    rclone nfsmount remote:path/to/files X: --volname \\server\share

You may also specify the network share UNC path as the mountpoint
itself. Then rclone will automatically assign a drive letter, same as
with * and use that as mountpoint, and instead use the UNC path
specified as the volume name, as if it were specified with the --volname
option. This will also implicitly set the --network-mode option. This
means the following two examples have same result:

    rclone nfsmount remote:path/to/files \\cloud\remote
    rclone nfsmount remote:path/to/files * --volname \\cloud\remote

There is yet another way to enable network mode, and to set the share
path, and that is to pass the "native" libfuse/WinFsp option directly:
--fuse-flag --VolumePrefix=\server\share. Note that the path must be
with just a single backslash prefix in this case.

Note: In previous versions of rclone this was the only supported method.

Read more about drive mapping

See also Limitations section below.

Windows filesystem permissions

The FUSE emulation layer on Windows must convert between the POSIX-based
permission model used in FUSE, and the permission model used in Windows,
based on access-control lists (ACL).

The mounted filesystem will normally get three entries in its
access-control list (ACL), representing permissions for the POSIX
permission scopes: Owner, group and others. By default, the owner and
group will be taken from the current user, and the built-in group
"Everyone" will be used to represent others. The user/group can be
customized with FUSE options "UserName" and "GroupName", e.g.
-o UserName=user123 -o GroupName="Authenticated Users". The permissions
on each entry will be set according to options --dir-perms and
--file-perms, which takes a value in traditional Unix numeric notation.

The default permissions corresponds to
--file-perms 0666 --dir-perms 0777, i.e. read and write permissions to
everyone. This means you will not be able to start any programs from the
mount. To be able to do that you must add execute permissions, e.g.
--file-perms 0777 --dir-perms 0777 to add it to everyone. If the program
needs to write files, chances are you will have to enable VFS File
Caching as well (see also limitations). Note that the default write
permission have some restrictions for accounts other than the owner,
specifically it lacks the "write extended attributes", as explained
next.

The mapping of permissions is not always trivial, and the result you see
in Windows Explorer may not be exactly like you expected. For example,
when setting a value that includes write access for the group or others
scope, this will be mapped to individual permissions "write attributes",
"write data" and "append data", but not "write extended attributes".
Windows will then show this as basic permission "Special" instead of
"Write", because "Write" also covers the "write extended attributes"
permission. When setting digit 0 for group or others, to indicate no
permissions, they will still get individual permissions "read
attributes", "read extended attributes" and "read permissions". This is
done for compatibility reasons, e.g. to allow users without additional
permissions to be able to read basic metadata about files like in Unix.

WinFsp 2021 (version 1.9) introduced a new FUSE option "FileSecurity",
that allows the complete specification of file security descriptors
using SDDL. With this you get detailed control of the resulting
permissions, compared to use of the POSIX permissions described above,
and no additional permissions will be added automatically for
compatibility with Unix. Some example use cases will following.

If you set POSIX permissions for only allowing access to the owner,
using --file-perms 0600 --dir-perms 0700, the user group and the
built-in "Everyone" group will still be given some special permissions,
as described above. Some programs may then (incorrectly) interpret this
as the file being accessible by everyone, for example an SSH client may
warn about "unprotected private key file". You can work around this by
specifying -o FileSecurity="D:P(A;;FA;;;OW)", which sets file all access
(FA) to the owner (OW), and nothing else.

When setting write permissions then, except for the owner, this does not
include the "write extended attributes" permission, as mentioned above.
This may prevent applications from writing to files, giving permission
denied error instead. To set working write permissions for the built-in
"Everyone" group, similar to what it gets by default but with the
addition of the "write extended attributes", you can specify
-o FileSecurity="D:P(A;;FRFW;;;WD)", which sets file read (FR) and file
write (FW) to everyone (WD). If file execute (FX) is also needed, then
change to -o FileSecurity="D:P(A;;FRFWFX;;;WD)", or set file all access
(FA) to get full access permissions, including delete, with
-o FileSecurity="D:P(A;;FA;;;WD)".

Windows caveats

Drives created as Administrator are not visible to other accounts, not
even an account that was elevated to Administrator with the User Account
Control (UAC) feature. A result of this is that if you mount to a drive
letter from a Command Prompt run as Administrator, and then try to
access the same drive from Windows Explorer (which does not run as
Administrator), you will not be able to see the mounted drive.

If you don't need to access the drive from applications running with
administrative privileges, the easiest way around this is to always
create the mount from a non-elevated command prompt.

To make mapped drives available to the user account that created them
regardless if elevated or not, there is a special Windows setting called
linked connections that can be enabled.

It is also possible to make a drive mount available to everyone on the
system, by running the process creating it as the built-in SYSTEM
account. There are several ways to do this: One is to use the
command-line utility PsExec, from Microsoft's Sysinternals suite, which
has option -s to start processes as the SYSTEM account. Another
alternative is to run the mount command from a Windows Scheduled Task,
or a Windows Service, configured to run as the SYSTEM account. A third
alternative is to use the WinFsp.Launcher infrastructure). Read more in
the install documentation. Note that when running rclone as another
user, it will not use the configuration file from your profile unless
you tell it to with the --config option. Note also that it is now the
SYSTEM account that will have the owner permissions, and other accounts
will have permissions according to the group or others scopes. As
mentioned above, these will then not get the "write extended attributes"
permission, and this may prevent writing to files. You can work around
this with the FileSecurity option, see example above.

Note that mapping to a directory path, instead of a drive letter, does
not suffer from the same limitations.

Mounting on macOS

Mounting on macOS can be done either via built-in NFS server, macFUSE
(also known as osxfuse) or FUSE-T. macFUSE is a traditional FUSE driver
utilizing a macOS kernel extension (kext). FUSE-T is an alternative FUSE
system which "mounts" via an NFSv4 local server.

Unicode Normalization

It is highly recommended to keep the default of
--no-unicode-normalization=false for all mount and serve commands on
macOS. For details, see vfs-case-sensitivity.

NFS mount

This method spins up an NFS server using serve nfs command and mounts it
to the specified mountpoint. If you run this in background mode using
|--daemon|, you will need to send SIGTERM signal to the rclone process
using |kill| command to stop the mount.

Note that --nfs-cache-handle-limit controls the maximum number of cached
file handles stored by the nfsmount caching handler. This should not be
set too low or you may experience errors when trying to access files.
The default is 1000000, but consider lowering this limit if the server's
system resource usage causes problems.

macFUSE Notes

If installing macFUSE using dmg packages from the website, rclone will
locate the macFUSE libraries without any further intervention. If
however, macFUSE is installed using the macports package manager, the
following addition steps are required.

    sudo mkdir /usr/local/lib
    cd /usr/local/lib
    sudo ln -s /opt/local/lib/libfuse.2.dylib

FUSE-T Limitations, Caveats, and Notes

There are some limitations, caveats, and notes about how it works. These
are current as of FUSE-T version 1.0.14.

ModTime update on read

As per the FUSE-T wiki:

  File access and modification times cannot be set separately as it
  seems to be an issue with the NFS client which always modifies both.
  Can be reproduced with touch -m and touch -a commands

This means that viewing files with various tools, notably macOS Finder,
will cause rlcone to update the modification time of the file. This may
make rclone upload a full new copy of the file.

Read Only mounts

When mounting with --read-only, attempts to write to files will fail
silently as opposed to with a clear warning as in macFUSE.

Mounting on Linux

On newer versions of Ubuntu, you may encounter the following error when
running rclone mount:

  NOTICE: mount helper error: fusermount3: mount failed: Permission
  denied CRITICAL: Fatal error: failed to mount FUSE fs: fusermount:
  exit status 1

This may be due to newer Apparmor restrictions, which can be disabled
with sudo aa-disable /usr/bin/fusermount3 (you may need to
sudo apt install apparmor-utils beforehand).

Limitations

Without the use of --vfs-cache-mode this can only write files
sequentially, it can only seek when reading. This means that many
applications won't work with their files on an rclone mount without
--vfs-cache-mode writes or --vfs-cache-mode full. See the VFS File
Caching section for more info. When using NFS mount on macOS, if you
don't specify |--vfs-cache-mode| the mount point will be read-only.

Bucket-based remotes - Azure Blob, Swift, S3, Google Cloud Storage and
B2 - can't store empty directories. Of these, only Azure Blob, Google
Cloud Storage and S3 can preserve them when you add
--xxx-directory_markers; otherwise, empty directories will vanish once
they drop out of the directory cache.

When rclone mount is invoked on Unix with --daemon flag, the main rclone
program will wait for the background mount to become ready or until the
timeout specified by the --daemon-wait flag. On Linux it can check mount
status using ProcFS so the flag in fact sets maximum time to wait, while
the real wait can be less. On macOS / BSD the time to wait is constant
and the check is performed only at the end. We advise you to set wait
time on macOS reasonably.

Only supported on Linux, FreeBSD, OS X and Windows at the moment.

rclone nfsmount vs rclone sync/copy

File systems expect things to be 100% reliable, whereas cloud storage
systems are a long way from 100% reliable. The rclone sync/copy commands
cope with this with lots of retries. However rclone nfsmount can't use
retries in the same way without making local copies of the uploads. Look
at the VFS File Caching for solutions to make nfsmount more reliable.

Attribute caching

You can use the flag --attr-timeout to set the time the kernel caches
the attributes (size, modification time, etc.) for directory entries.

The default is 1s which caches files just long enough to avoid too many
callbacks to rclone from the kernel.

In theory 0s should be the correct value for filesystems which can
change outside the control of the kernel. However this causes quite a
few problems such as rclone using too much memory, rclone not serving
files to samba and excessive time listing directories.

The kernel can cache the info about a file for the time given by
--attr-timeout. You may see corruption if the remote file changes length
during this window. It will show up as either a truncated file or a file
with garbage on the end. With --attr-timeout 1s this is very unlikely
but not impossible. The higher you set --attr-timeout the more likely it
is. The default setting of "1s" is the lowest setting which mitigates
the problems above.

If you set it higher (10s or 1m say) then the kernel will call back to
rclone less often making it more efficient, however there is more chance
of the corruption issue above.

If files don't change on the remote outside of the control of rclone
then there is no chance of corruption.

This is the same as setting the attr_timeout option in mount.fuse.

Filters

Note that all the rclone filters can be used to select a subset of the
files to be visible in the mount.

systemd

When running rclone nfsmount as a systemd service, it is possible to use
Type=notify. In this case the service will enter the started state after
the mountpoint has been successfully set up. Units having the rclone
nfsmount service specified as a requirement will see all files and
folders immediately in this mode.

Note that systemd runs mount units without any environment variables
including PATH or HOME. This means that tilde (~) expansion will not
work and you should provide --config and --cache-dir explicitly as
absolute paths via rclone arguments. Since mounting requires the
fusermount or fusermount3 program, rclone will use the fallback PATH of
/bin:/usr/bin in this scenario. Please ensure that
fusermount/fusermount3 is present on this PATH.

Rclone as Unix mount helper

The core Unix program /bin/mount normally takes the -t FSTYPE argument
then runs the /sbin/mount.FSTYPE helper program passing it mount options
as -o key=val,... or --opt=.... Automount (classic or systemd) behaves
in a similar way.

rclone by default expects GNU-style flags --key val. To run it as a
mount helper you should symlink rclone binary to /sbin/mount.rclone and
optionally /usr/bin/rclonefs, e.g.
ln -s /usr/bin/rclone /sbin/mount.rclone. rclone will detect it and
translate command-line arguments appropriately.

Now you can run classic mounts like this:

    mount sftp1:subdir /mnt/data -t rclone -o vfs_cache_mode=writes,sftp_key_file=/path/to/pem

or create systemd mount units:

    # /etc/systemd/system/mnt-data.mount
    [Unit]
    Description=Mount for /mnt/data
    [Mount]
    Type=rclone
    What=sftp1:subdir
    Where=/mnt/data
    Options=rw,_netdev,allow_other,args2env,vfs-cache-mode=writes,config=/etc/rclone.conf,cache-dir=/var/rclone

optionally accompanied by systemd automount unit

    # /etc/systemd/system/mnt-data.automount
    [Unit]
    Description=AutoMount for /mnt/data
    [Automount]
    Where=/mnt/data
    TimeoutIdleSec=600
    [Install]
    WantedBy=multi-user.target

or add in /etc/fstab a line like

    sftp1:subdir /mnt/data rclone rw,noauto,nofail,_netdev,x-systemd.automount,args2env,vfs_cache_mode=writes,config=/etc/rclone.conf,cache_dir=/var/cache/rclone 0 0

or use classic Automountd. Remember to provide explicit
config=...,cache-dir=... as a workaround for mount units being run
without HOME.

Rclone in the mount helper mode will split -o argument(s) by comma,
replace _ by - and prepend -- to get the command-line flags. Options
containing commas or spaces can be wrapped in single or double quotes.
Any inner quotes inside outer quotes of the same type should be doubled.

Mount option syntax includes a few extra options treated specially:

-   env.NAME=VALUE will set an environment variable for the mount
    process. This helps with Automountd and Systemd.mount which don't
    allow setting custom environment for mount helpers. Typically you
    will use env.HTTPS_PROXY=proxy.host:3128 or env.HOME=/root
-   command=cmount can be used to run cmount or any other rclone command
    rather than the default mount.
-   args2env will pass mount options to the mount helper running in
    background via environment variables instead of command line
    arguments. This allows to hide secrets from such commands as ps or
    pgrep.
-   vv... will be transformed into appropriate --verbose=N
-   standard mount options like x-systemd.automount, _netdev, nosuid and
    alike are intended only for Automountd and ignored by rclone.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

    rclone nfsmount remote:path /path/to/mountpoint [flags]

Options

          --addr string                            IPaddress:Port or :Port to bind server to
          --allow-non-empty                        Allow mounting over a non-empty directory (not supported on Windows)
          --allow-other                            Allow access to other users (not supported on Windows)
          --allow-root                             Allow access to root user (not supported on Windows)
          --async-read                             Use asynchronous reads (not supported on Windows) (default true)
          --attr-timeout Duration                  Time for which file/directory attributes are cached (default 1s)
          --daemon                                 Run mount in background and exit parent process (as background output is suppressed, use --log-file with --log-format=pid,... to monitor) (not supported on Windows)
          --daemon-timeout Duration                Time limit for rclone to respond to kernel (not supported on Windows) (default 0s)
          --daemon-wait Duration                   Time to wait for ready mount from daemon (maximum time on Linux, constant sleep time on OSX/BSD) (not supported on Windows) (default 1m0s)
          --debug-fuse                             Debug the FUSE internals - needs -v
          --default-permissions                    Makes kernel enforce access control based on the file mode (not supported on Windows)
          --devname string                         Set the device name - default is remote:path
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --direct-io                              Use Direct IO, disables caching of data
          --file-perms FileMode                    File permissions (default 666)
          --fuse-flag stringArray                  Flags or arguments to be passed direct to libfuse/WinFsp (repeat if required)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for nfsmount
          --link-perms FileMode                    Link permissions (default 666)
          --max-read-ahead SizeSuffix              The number of bytes that can be prefetched for sequential reads (not supported on Windows) (default 128Ki)
          --mount-case-insensitive Tristate        Tell the OS the mount is case insensitive (true) or sensitive (false) regardless of the backend (auto) (default unset)
          --network-mode                           Mount as remote network drive, instead of fixed disk drive (supported on Windows only)
          --nfs-cache-dir string                   The directory the NFS handle cache will use if set
          --nfs-cache-handle-limit int             max file handles cached simultaneously (min 5) (default 1000000)
          --nfs-cache-type memory|disk|symlink     Type of NFS handle cache to use (default memory)
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --noappledouble                          Ignore Apple Double (._) and .DS_Store files (supported on OSX only) (default true)
          --noapplexattr                           Ignore all "com.apple.*" extended attributes (supported on OSX only)
      -o, --option stringArray                     Option for libfuse/WinFsp (repeat if required)
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --sudo                                   Use sudo to run the mount/umount commands as root.
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)
          --volname string                         Set the volume name (supported on Windows and OSX only)
          --write-back-cache                       Makes kernel buffer writes before sending them to rclone (without this, writethrough caching is used) (not supported on Windows)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone obscure

Obscure password for use in the rclone config file.

Synopsis

In the rclone config file, human-readable passwords are obscured.
Obscuring them is done by encrypting them and writing them out in
base64. This is not a secure way of encrypting these passwords as rclone
can decrypt them - it is to prevent "eyedropping" - namely someone
seeing a password in the rclone config file by accident.

Many equally important things (like access tokens) are not obscured in
the config file. However it is very hard to shoulder surf a 64 character
hex token.

This command can also accept a password through STDIN instead of an
argument by passing a hyphen as an argument. This will use the first
line of STDIN as the password not including the trailing newline.

    echo 'secretpassword' | rclone obscure -

If there is no data on STDIN to read, rclone obscure will default to
obfuscating the hyphen itself.

If you want to encrypt the config file then please use config file
encryption - see rclone config for more info.

    rclone obscure password [flags]

Options

      -h, --help   help for obscure

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone rc

Run a command against a running rclone.

Synopsis

This runs a command against a running rclone. Use the --url flag to
specify an non default URL to connect on. This can be either a ":port"
which is taken to mean http://localhost:port or a "host:port" which is
taken to mean http://host:port.

A username and password can be passed in with --user and --pass.

Note that --rc-addr, --rc-user, --rc-pass will be read also for --url,
--user, --pass.

The --unix-socket flag can be used to connect over a unix socket like
this

    # start server on /tmp/my.socket
    rclone rcd --rc-addr unix:///tmp/my.socket
    # Connect to it
    rclone rc --unix-socket /tmp/my.socket core/stats

Arguments should be passed in as parameter=value.

The result will be returned as a JSON object by default.

The --json parameter can be used to pass in a JSON blob as an input
instead of key=value arguments. This is the only way of passing in more
complicated values.

The -o/--opt option can be used to set a key "opt" with key, value
options in the form -o key=value or -o key. It can be repeated as many
times as required. This is useful for rc commands which take the "opt"
parameter which by convention is a dictionary of strings.

    -o key=value -o key2

Will place this in the "opt" value

    {"key":"value", "key2","")

The -a/--arg option can be used to set strings in the "arg" value. It
can be repeated as many times as required. This is useful for rc
commands which take the "arg" parameter which by convention is a list of
strings.

    -a value -a value2

Will place this in the "arg" value

    ["value", "value2"]

Use --loopback to connect to the rclone instance running rclone rc. This
is very useful for testing commands without having to run an rclone rc
server, e.g.:

    rclone rc --loopback operations/about fs=/

Use rclone rc to see a list of all possible commands.

    rclone rc commands parameter [flags]

Options

      -a, --arg stringArray      Argument placed in the "arg" array
      -h, --help                 help for rc
          --json string          Input JSON - use instead of key=value args
          --loopback             If set connect to this rclone instance not via HTTP
          --no-output            If set, don't output the JSON result
      -o, --opt stringArray      Option in the form name=value or name placed in the "opt" array
          --pass string          Password to use to connect to rclone remote control
          --unix-socket string   Path to a unix domain socket to dial to, instead of opening a TCP connection directly
          --url string           URL to connect to rclone remote control (default "http://localhost:5572/")
          --user string          Username to use to rclone remote control

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone rcat

Copies standard input to file on remote.

Synopsis

Reads from standard input (stdin) and copies it to a single remote file.

    echo "hello world" | rclone rcat remote:path/to/file
    ffmpeg - | rclone rcat remote:path/to/file

If the remote file already exists, it will be overwritten.

rcat will try to upload small files in a single request, which is
usually more efficient than the streaming/chunked upload endpoints,
which use multiple requests. Exact behaviour depends on the remote. What
is considered a small file may be set through --streaming-upload-cutoff.
Uploading only starts after the cutoff is reached or if the file ends
before that. The data must fit into RAM. The cutoff needs to be small
enough to adhere the limits of your remote, please see there. Generally
speaking, setting this cutoff too high will decrease your performance.

Use the --size flag to preallocate the file in advance at the remote end
and actually stream it, even if remote backend doesn't support
streaming.

--size should be the exact size of the input stream in bytes. If the
size of the stream is different in length to the --size passed in then
the transfer will likely fail.

Note that the upload cannot be retried because the data is not stored.
If the backend supports multipart uploading then individual chunks can
be retried. If you need to transfer a lot of data, you may be better off
caching it locally and then rclone move it to the destination which can
use retries.

    rclone rcat remote:path [flags]

Options

      -h, --help       help for rcat
          --size int   File size hint to preallocate (default -1)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone rcd

Run rclone listening to remote control commands only.

Synopsis

This runs rclone so that it only listens to remote control commands.

This is useful if you are controlling rclone via the rc API.

If you pass in a path to a directory, rclone will serve that directory
for GET requests on the URL passed in. It will also open the URL in the
browser when rclone is run.

See the rc documentation for more info on the rc flags.

Server options

Use --rc-addr to specify which IP address and port the server should
listen on, eg --rc-addr 1.2.3.4:8000 or --rc-addr :8080 to listen to all
IPs. By default it only listens on localhost. You can use port :0 to let
the OS choose an available port.

If you set --rc-addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.

You can use a unix socket by setting the url to unix:///path/to/socket
or just by using an absolute path name.

--rc-addr may be repeated to listen on multiple IPs/ports/sockets.
Socket activation, described further below, can also be used to
accomplish the same.

--rc-server-read-timeout and --rc-server-write-timeout can be used to
control the timeouts on the server. Note that this is the total time for
a transfer.

--rc-max-header-bytes controls the maximum number of bytes the server
will accept in the HTTP header.

--rc-baseurl controls the URL prefix that rclone serves from. By default
rclone will serve from the root. If you used --rc-baseurl "/rclone" then
rclone would serve from a URL starting with "/rclone/". This is useful
if you wish to proxy rclone serve. Rclone automatically inserts leading
and trailing "/" on --rc-baseurl, so --rc-baseurl "rclone",
--rc-baseurl "/rclone" and --rc-baseurl "/rclone/" are all treated
identically.

--rc-disable-zip may be set to disable the zipping download option.

Protocol

The server supports HTTP/1.1 and HTTP/2. HTTP/2 is used automatically
for TLS connections. For non-TLS connections, HTTP/2 cleartext (h2c) is
supported, allowing HTTP/2 without encryption.

TLS (SSL)

By default this will serve over http. If you want you can serve over
https. You will need to supply the --rc-cert and --rc-key flags. If you
wish to do client side certificate validation then you will need to
supply --rc-client-ca also.

--rc-cert must be set to the path of a file containing either a PEM
encoded certificate, or a concatenation of that with the CA certificate.
--rc-key must be set to the path of a file with the PEM encoded private
key. If setting --rc-client-ca, it should be set to the path of a file
with PEM encoded client certificate authority certificates.

--rc-min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").

Socket activation

Instead of the listening addresses specified above, rclone will listen
to all FDs passed by the service manager, if any (and ignore any
arguments passed by --rc-addr).

This allows rclone to be a socket-activated service. It can be
configured with .socket and .service unit files as described in
https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html.

Socket activation can be tested ad-hoc with the
systemd-socket-activatecommand

    systemd-socket-activate -l 8000 -- rclone serve

This will socket-activate rclone on the first connection to port 8000
over TCP.

Template

--rc-template allows a user to specify a custom markup template for HTTP
and WebDAV serve functions. The server exports the following markup to
be used within the template to server pages:

  -----------------------------------------------------------------------
  Parameter              Subparameter              Description
  ---------------------- ------------------------- ----------------------
  .Name                                            The full path of a
                                                   file/directory.

  .Title                                           Directory listing of
                                                   '.Name'.

  .Sort                                            The current sort used.
                                                   This is changeable via
                                                   '?sort=' parameter.
                                                   Possible values:
                                                   namedirfirst, name,
                                                   size, time (default
                                                   namedirfirst).

  .Order                                           The current ordering
                                                   used. This is
                                                   changeable via
                                                   '?order=' parameter.
                                                   Possible values: asc,
                                                   desc (default asc).

  .Query                                           Currently unused.

  .Breadcrumb                                      Allows for creating a
                                                   relative navigation.

                         .Link                     The link of the Text
                                                   relative to the root.

                         .Text                     The Name of the
                                                   directory.

  .Entries                                         Information about a
                                                   specific
                                                   file/directory.

                         .URL                      The url of an entry.

                         .Leaf                     Currently same as
                                                   '.URL' but intended to
                                                   be just the name.

                         .IsDir                    Boolean for if an
                                                   entry is a directory
                                                   or not.

                         .Size                     Size in bytes of the
                                                   entry.

                         .ModTime                  The UTC timestamp of
                                                   an entry.
  -----------------------------------------------------------------------

The server also makes the following functions available so that they can
be used within the template. These functions help extend the options for
dynamic rendering of HTML. They can be used to render HTML based on
specific conditions.

  -----------------------------------------------------------------------
  Function                            Description
  ----------------------------------- -----------------------------------
  afterEpoch                          Returns the time since the epoch
                                      for the given time.

  contains                            Checks whether a given substring is
                                      present or not in a given string.

  hasPrefix                           Checks whether the given string
                                      begins with the specified prefix.

  hasSuffix                           Checks whether the given string end
                                      with the specified suffix.
  -----------------------------------------------------------------------

Authentication

By default this will serve files without needing a login.

You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --rc-user and --rc-pass flags.

Alternatively, you can have the reverse proxy manage authentication and
use the username provided in the configured header with
--user-from-header (e.g., --rc-user-from-header=x-remote-user). Ensure
the proxy is trusted and headers cannot be spoofed, as misconfiguration
may lead to unauthorized access.

If either of the above authentication methods is not configured and
client certificates are required by the --client-ca flag passed to the
server, the client certificate common name will be considered as the
username.

Use --rc-htpasswd /path/to/htpasswd to provide an htpasswd file. This is
in standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.

To create an htpasswd file:

    touch htpasswd
    htpasswd -B htpasswd user
    htpasswd -B htpasswd anotherUser

The password file can be updated while rclone is running.

Use --rc-realm to set the authentication realm.

Use --rc-salt to change the password hashing salt from the default.

    rclone rcd <path to files to serve>* [flags]

Options

      -h, --help   help for rcd

Options shared with other commands are described next. See the global
flags page for global options not listed here.

RC Options

Flags to control the Remote Control API

          --rc                                 Enable the remote control server
          --rc-addr stringArray                IPaddress:Port or :Port to bind server to (default localhost:5572)
          --rc-allow-origin string             Origin which cross-domain request (CORS) can be executed from
          --rc-baseurl string                  Prefix for URLs - leave blank for root
          --rc-cert string                     TLS PEM key (concatenation of certificate and CA certificate)
          --rc-client-ca string                Client certificate authority to verify clients with
          --rc-enable-metrics                  Enable the Prometheus metrics path at the remote control server
          --rc-files string                    Path to local files to serve on the HTTP server
          --rc-htpasswd string                 A htpasswd file - if not provided no authentication is done
          --rc-job-expire-duration Duration    Expire finished async jobs older than this value (default 1m0s)
          --rc-job-expire-interval Duration    Interval to check for expired async jobs (default 10s)
          --rc-key string                      TLS PEM Private key
          --rc-max-header-bytes int            Maximum size of request header (default 4096)
          --rc-min-tls-version string          Minimum TLS version that is acceptable (default "tls1.0")
          --rc-no-auth                         Don't require auth for certain methods
          --rc-pass string                     Password for authentication
          --rc-realm string                    Realm for authentication
          --rc-salt string                     Password hashing salt (default "dlPL2MqE")
          --rc-serve                           Enable the serving of remote objects
          --rc-serve-no-modtime                Don't read the modification time (can speed things up)
          --rc-server-read-timeout Duration    Timeout for server reading data (default 1h0m0s)
          --rc-server-write-timeout Duration   Timeout for server writing data (default 1h0m0s)
          --rc-template string                 User-specified template
          --rc-user string                     User name for authentication
          --rc-user-from-header string         User name from a defined HTTP header
          --rc-web-fetch-url string            URL to fetch the releases for webgui (default "https://api.github.com/repos/rclone/rclone-webui-react/releases/latest")
          --rc-web-gui                         Launch WebGUI on localhost
          --rc-web-gui-force-update            Force update to latest version of web gui
          --rc-web-gui-no-open-browser         Don't open the browser automatically
          --rc-web-gui-update                  Check and update to latest version of web gui

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone rmdirs

Remove empty directories under the path.

Synopsis

This recursively removes any empty directories (including directories
that only contain empty directories), that it finds under the path. The
root path itself will also be removed if it is empty, unless you supply
the --leave-root flag.

Use command rmdir to delete just the empty directory given by path, not
recurse.

This is useful for tidying up remotes that rclone has left a lot of
empty directories in. For example the delete command will delete files
but leave the directory structure (unless used with option --rmdirs).

This will delete --checkers directories concurrently so if you have
thousands of empty directories consider increasing this number.

To delete a path and any objects in it, use the purge command.

    rclone rmdirs remote:path [flags]

Options

      -h, --help         help for rmdirs
          --leave-root   Do not remove root directory if empty

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone selfupdate

Update the rclone binary.

Synopsis

This command downloads the latest release of rclone and replaces the
currently running binary. The download is verified with a hashsum and
cryptographically signed signature; see the release signing docs for
details.

If used without flags (or with implied --stable flag), this command will
install the latest stable release. However, some issues may be fixed (or
features added) only in the latest beta release. In such cases you
should run the command with the --beta flag, i.e.
rclone selfupdate --beta. You can check in advance what version would be
installed by adding the --check flag, then repeat the command without it
when you are satisfied.

Sometimes the rclone team may recommend you a concrete beta or stable
rclone release to troubleshoot your issue or add a bleeding edge
feature. The --version VER flag, if given, will update to the concrete
version instead of the latest one. If you omit micro version from VER
(for example 1.53), the latest matching micro version will be used.

Upon successful update rclone will print a message that contains a
previous version number. You will need it if you later decide to revert
your update for some reason. Then you'll have to note the previous
version and run the following command:
rclone selfupdate [--beta] OLDVER. If the old version contains only dots
and digits (for example v1.54.0) then it's a stable release so you won't
need the --beta flag. Beta releases have an additional information
similar to v1.54.0-beta.5111.06f1c0c61. (if you are a developer and use
a locally built rclone, the version number will end with -DEV, you will
have to rebuild it as it obviously can't be distributed).

If you previously installed rclone via a package manager, the package
may include local documentation or configure services. You may wish to
update with the flag --package deb or --package rpm (whichever is
correct for your OS) to update these too. This command with the default
--package zip will update only the rclone executable so the local manual
may become inaccurate after it.

The rclone mount command may or may not support extended FUSE options
depending on the build and OS. selfupdate will refuse to update if the
capability would be discarded.

Note: Windows forbids deletion of a currently running executable so this
command will rename the old executable to 'rclone.old.exe' upon success.

Please note that this command was not available before rclone version
1.55. If it fails for you with the message unknown command "selfupdate"
then you will need to update manually following the install
documentation.

    rclone selfupdate [flags]

Options

          --beta             Install beta release
          --check            Check for latest release, do not download
      -h, --help             help for selfupdate
          --output string    Save the downloaded binary at a given path (default: replace running binary)
          --package string   Package format: zip|deb|rpm (default: zip)
          --stable           Install stable release (this is the default)
          --version string   Install the given rclone version (default: latest)

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone serve

Serve a remote over a protocol.

Synopsis

Serve a remote over a given protocol. Requires the use of a subcommand
to specify the protocol, e.g.

    rclone serve http remote:

When the "--metadata" flag is enabled, the following metadata fields
will be provided as headers: - "content-disposition" - "cache-control" -
"content-language" - "content-encoding" Note: The availability of these
fields depends on whether the remote supports metadata.

Each subcommand has its own options which you can see in their help.

    rclone serve <protocol> [opts] <remote> [flags]

Options

      -h, --help   help for serve

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.
-   rclone serve dlna - Serve remote:path over DLNA
-   rclone serve docker - Serve any remote on docker's volume plugin
    API.
-   rclone serve ftp - Serve remote:path over FTP.
-   rclone serve http - Serve the remote over HTTP.
-   rclone serve nfs - Serve the remote as an NFS mount
-   rclone serve restic - Serve the remote for restic's REST API.
-   rclone serve s3 - Serve remote:path over s3.
-   rclone serve sftp - Serve the remote over SFTP.
-   rclone serve webdav - Serve remote:path over WebDAV.

rclone serve dlna

Serve remote:path over DLNA

Synopsis

Run a DLNA media server for media stored in an rclone remote. Many
devices, such as the Xbox and PlayStation, can automatically discover
this server in the LAN and play audio/video from it. VLC is also
supported. Service discovery uses UDP multicast packets (SSDP) and will
thus only work on LANs.

Rclone will list all files present in the remote, without filtering
based on media formats or file extensions. Additionally, there is no
media transcoding support. This means that some players might show files
that they are not able to play back correctly.

Rclone will add external subtitle files (.srt) to videos if they have
the same filename as the video file itself (except the extension),
either in the same directory as the video, or in a "Subs" subdirectory.

Server options

Use --addr to specify which IP address and port the server should listen
on, e.g. --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs.

Use --name to choose the friendly server name, which is by default
"rclone (hostname)".

Use --log-trace in conjunction with -vv to enable additional debug
logging of all UPNP traffic.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

    rclone serve dlna remote:path [flags]

Options

          --addr string                            The ip:port or :port to bind the DLNA http server to (default ":7879")
          --announce-interval Duration             The interval between SSDP announcements (default 12m0s)
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --file-perms FileMode                    File permissions (default 666)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for dlna
          --interface stringArray                  The interface to use for SSDP (repeat as necessary)
          --link-perms FileMode                    Link permissions (default 666)
          --log-trace                              Enable trace logging of SOAP traffic
          --name string                            Name of DLNA server
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve docker

Serve any remote on docker's volume plugin API.

Synopsis

This command implements the Docker volume plugin API allowing docker to
use rclone as a data storage mechanism for various cloud providers.
rclone provides docker volume plugin based on it.

To create a docker plugin, one must create a Unix or TCP socket that
Docker will look for when you use the plugin and then it listens for
commands from docker daemon and runs the corresponding code when
necessary. Docker plugins can run as a managed plugin under control of
the docker daemon or as an independent native service. For testing, you
can just run it directly from the command line, for example:

    sudo rclone serve docker --base-dir /tmp/rclone-volumes --socket-addr localhost:8787 -vv

Running rclone serve docker will create the said socket, listening for
commands from Docker to create the necessary Volumes. Normally you need
not give the --socket-addr flag. The API will listen on the unix domain
socket at /run/docker/plugins/rclone.sock. In the example above rclone
will create a TCP socket and a small file
/etc/docker/plugins/rclone.spec containing the socket address. We use
sudo because both paths are writeable only by the root user.

If you later decide to change listening socket, the docker daemon must
be restarted to reconnect to /run/docker/plugins/rclone.sock or parse
new /etc/docker/plugins/rclone.spec. Until you restart, any volume
related docker commands will timeout trying to access the old socket.
Running directly is supported on Linux only, not on Windows or MacOS.
This is not a problem with managed plugin mode described in details in
the full documentation.

The command will create volume mounts under the path given by --base-dir
(by default /var/lib/docker-volumes/rclone available only to root) and
maintain the JSON formatted file docker-plugin.state in the rclone cache
directory with book-keeping records of created and mounted volumes.

All mount and VFS options are submitted by the docker daemon via API,
but you can also provide defaults on the command line as well as set
path to the config file and cache directory or adjust logging verbosity.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

    rclone serve docker [flags]

Options

          --allow-non-empty                        Allow mounting over a non-empty directory (not supported on Windows)
          --allow-other                            Allow access to other users (not supported on Windows)
          --allow-root                             Allow access to root user (not supported on Windows)
          --async-read                             Use asynchronous reads (not supported on Windows) (default true)
          --attr-timeout Duration                  Time for which file/directory attributes are cached (default 1s)
          --base-dir string                        Base directory for volumes (default "/var/lib/docker-volumes/rclone")
          --daemon                                 Run mount in background and exit parent process (as background output is suppressed, use --log-file with --log-format=pid,... to monitor) (not supported on Windows)
          --daemon-timeout Duration                Time limit for rclone to respond to kernel (not supported on Windows) (default 0s)
          --daemon-wait Duration                   Time to wait for ready mount from daemon (maximum time on Linux, constant sleep time on OSX/BSD) (not supported on Windows) (default 1m0s)
          --debug-fuse                             Debug the FUSE internals - needs -v
          --default-permissions                    Makes kernel enforce access control based on the file mode (not supported on Windows)
          --devname string                         Set the device name - default is remote:path
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --direct-io                              Use Direct IO, disables caching of data
          --file-perms FileMode                    File permissions (default 666)
          --forget-state                           Skip restoring previous state
          --fuse-flag stringArray                  Flags or arguments to be passed direct to libfuse/WinFsp (repeat if required)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for docker
          --link-perms FileMode                    Link permissions (default 666)
          --max-read-ahead SizeSuffix              The number of bytes that can be prefetched for sequential reads (not supported on Windows) (default 128Ki)
          --mount-case-insensitive Tristate        Tell the OS the mount is case insensitive (true) or sensitive (false) regardless of the backend (auto) (default unset)
          --network-mode                           Mount as remote network drive, instead of fixed disk drive (supported on Windows only)
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --no-spec                                Do not write spec file
          --noappledouble                          Ignore Apple Double (._) and .DS_Store files (supported on OSX only) (default true)
          --noapplexattr                           Ignore all "com.apple.*" extended attributes (supported on OSX only)
      -o, --option stringArray                     Option for libfuse/WinFsp (repeat if required)
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --socket-addr string                     Address <host:port> or absolute path (default: /run/docker/plugins/rclone.sock)
          --socket-gid int                         GID for unix socket (default: current process GID) (default 1000)
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)
          --volname string                         Set the volume name (supported on Windows and OSX only)
          --write-back-cache                       Makes kernel buffer writes before sending them to rclone (without this, writethrough caching is used) (not supported on Windows)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve ftp

Serve remote:path over FTP.

Synopsis

Run a basic FTP server to serve a remote over FTP protocol. This can be
viewed with a FTP client or you can make a remote of type FTP to read
and write it.

Server options

Use --addr to specify which IP address and port the server should listen
on, e.g. --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.

If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.

Authentication

By default this will serve files without needing a login.

You can set a single username and password with the --user and --pass
flags.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

Auth Proxy

If you supply the parameter --auth-proxy /path/to/program then rclone
will use that program to generate backends on the fly which then are
used to authenticate incoming requests. This uses a simple JSON based
protocol with input on STDIN and output on STDOUT.

PLEASE NOTE: --auth-proxy and --authorized-keys cannot be used together,
if --auth-proxy is set the authorized keys option will be ignored.

There is an example program bin/test_proxy.py in the rclone source code.

The program's job is to take a user and pass on the input and turn those
into the config for a backend on STDOUT in JSON format. This config will
have any default parameters for the backend added, but it won't use
configuration from environment variables or command line options - it is
the job of the proxy program to make a complete config.

This config generated must have this extra parameter

-   _root - root to use for the backend

And it may have this parameter

-   _obscure - comma separated strings for parameters to obscure

If password authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "pass": "mypassword"
    }

If public-key authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "public_key": "AAAAB3NzaC1yc2EAAAADAQABAAABAQDuwESFdAe14hVS6omeyX7edc...JQdf"
    }

And as an example return this on STDOUT

    {
      "type": "sftp",
      "_root": "",
      "_obscure": "pass",
      "user": "me",
      "pass": "mypassword",
      "host": "sftp.example.com"
    }

This would mean that an SFTP backend would be created on the fly for the
user and pass/public_key returned in the output to the host given. Note
that since _obscure is set to pass, rclone will obscure the pass
parameter before creating the backend (which is required for sftp
backends).

The program can manipulate the supplied user in any way, for example to
make proxy to many different sftp backends, you could make the user be
user@example.com and then set the host to example.com in the output and
the user to user. For security you'd probably want to restrict the host
to a limited list.

Note that an internal cache is keyed on user so only use that for
configuration, don't use pass or public_key. This also means that if a
user's password or public-key is changed the cache will need to expire
(which takes 5 mins) before it takes effect.

This can be used to build general purpose proxies to any kind of backend
that rclone supports.

    rclone serve ftp remote:path [flags]

Options

          --addr string                            IPaddress:Port or :Port to bind server to (default "localhost:2121")
          --auth-proxy string                      A program to use to create the backend from the auth
          --cert string                            TLS PEM key (concatenation of certificate and CA certificate)
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --file-perms FileMode                    File permissions (default 666)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for ftp
          --key string                             TLS PEM Private key
          --link-perms FileMode                    Link permissions (default 666)
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --pass string                            Password for authentication (empty value allow every password)
          --passive-port string                    Passive port range to use (default "30000-32000")
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --public-ip string                       Public IP address to advertise for passive connections
          --read-only                              Only allow read-only access
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --user string                            User name for authentication (default "anonymous")
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve http

Serve the remote over HTTP.

Synopsis

Run a basic web server to serve a remote over HTTP. This can be viewed
in a web browser or you can make a remote of type http read from it.

You can use the filter flags (e.g. --include, --exclude) to control what
is served.

The server will log errors. Use -v to see access logs.

--bwlimit will be respected for file transfers. Use --stats to control
the stats printing.

Server options

Use --addr to specify which IP address and port the server should listen
on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.

If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.

You can use a unix socket by setting the url to unix:///path/to/socket
or just by using an absolute path name.

--addr may be repeated to listen on multiple IPs/ports/sockets. Socket
activation, described further below, can also be used to accomplish the
same.

--server-read-timeout and --server-write-timeout can be used to control
the timeouts on the server. Note that this is the total time for a
transfer.

--max-header-bytes controls the maximum number of bytes the server will
accept in the HTTP header.

--baseurl controls the URL prefix that rclone serves from. By default
rclone will serve from the root. If you used --baseurl "/rclone" then
rclone would serve from a URL starting with "/rclone/". This is useful
if you wish to proxy rclone serve. Rclone automatically inserts leading
and trailing "/" on --baseurl, so --baseurl "rclone",
--baseurl "/rclone" and --baseurl "/rclone/" are all treated
identically.

--disable-zip may be set to disable the zipping download option.

Protocol

The server supports HTTP/1.1 and HTTP/2. HTTP/2 is used automatically
for TLS connections. For non-TLS connections, HTTP/2 cleartext (h2c) is
supported, allowing HTTP/2 without encryption.

TLS (SSL)

By default this will serve over http. If you want you can serve over
https. You will need to supply the --cert and --key flags. If you wish
to do client side certificate validation then you will need to supply
--client-ca also.

--cert must be set to the path of a file containing either a PEM encoded
certificate, or a concatenation of that with the CA certificate. --key
must be set to the path of a file with the PEM encoded private key. If
setting --client-ca, it should be set to the path of a file with PEM
encoded client certificate authority certificates.

--min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").

Socket activation

Instead of the listening addresses specified above, rclone will listen
to all FDs passed by the service manager, if any (and ignore any
arguments passed by --addr).

This allows rclone to be a socket-activated service. It can be
configured with .socket and .service unit files as described in
https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html.

Socket activation can be tested ad-hoc with the
systemd-socket-activatecommand

    systemd-socket-activate -l 8000 -- rclone serve

This will socket-activate rclone on the first connection to port 8000
over TCP.

Template

--template allows a user to specify a custom markup template for HTTP
and WebDAV serve functions. The server exports the following markup to
be used within the template to server pages:

  -----------------------------------------------------------------------
  Parameter              Subparameter              Description
  ---------------------- ------------------------- ----------------------
  .Name                                            The full path of a
                                                   file/directory.

  .Title                                           Directory listing of
                                                   '.Name'.

  .Sort                                            The current sort used.
                                                   This is changeable via
                                                   '?sort=' parameter.
                                                   Possible values:
                                                   namedirfirst, name,
                                                   size, time (default
                                                   namedirfirst).

  .Order                                           The current ordering
                                                   used. This is
                                                   changeable via
                                                   '?order=' parameter.
                                                   Possible values: asc,
                                                   desc (default asc).

  .Query                                           Currently unused.

  .Breadcrumb                                      Allows for creating a
                                                   relative navigation.

                         .Link                     The link of the Text
                                                   relative to the root.

                         .Text                     The Name of the
                                                   directory.

  .Entries                                         Information about a
                                                   specific
                                                   file/directory.

                         .URL                      The url of an entry.

                         .Leaf                     Currently same as
                                                   '.URL' but intended to
                                                   be just the name.

                         .IsDir                    Boolean for if an
                                                   entry is a directory
                                                   or not.

                         .Size                     Size in bytes of the
                                                   entry.

                         .ModTime                  The UTC timestamp of
                                                   an entry.
  -----------------------------------------------------------------------

The server also makes the following functions available so that they can
be used within the template. These functions help extend the options for
dynamic rendering of HTML. They can be used to render HTML based on
specific conditions.

  -----------------------------------------------------------------------
  Function                            Description
  ----------------------------------- -----------------------------------
  afterEpoch                          Returns the time since the epoch
                                      for the given time.

  contains                            Checks whether a given substring is
                                      present or not in a given string.

  hasPrefix                           Checks whether the given string
                                      begins with the specified prefix.

  hasSuffix                           Checks whether the given string end
                                      with the specified suffix.
  -----------------------------------------------------------------------

Authentication

By default this will serve files without needing a login.

You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --user and --pass flags.

Alternatively, you can have the reverse proxy manage authentication and
use the username provided in the configured header with
--user-from-header (e.g., --user-from-header=x-remote-user). Ensure the
proxy is trusted and headers cannot be spoofed, as misconfiguration may
lead to unauthorized access.

If either of the above authentication methods is not configured and
client certificates are required by the --client-ca flag passed to the
server, the client certificate common name will be considered as the
username.

Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in
standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.

To create an htpasswd file:

    touch htpasswd
    htpasswd -B htpasswd user
    htpasswd -B htpasswd anotherUser

The password file can be updated while rclone is running.

Use --realm to set the authentication realm.

Use --salt to change the password hashing salt from the default.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

Auth Proxy

If you supply the parameter --auth-proxy /path/to/program then rclone
will use that program to generate backends on the fly which then are
used to authenticate incoming requests. This uses a simple JSON based
protocol with input on STDIN and output on STDOUT.

PLEASE NOTE: --auth-proxy and --authorized-keys cannot be used together,
if --auth-proxy is set the authorized keys option will be ignored.

There is an example program bin/test_proxy.py in the rclone source code.

The program's job is to take a user and pass on the input and turn those
into the config for a backend on STDOUT in JSON format. This config will
have any default parameters for the backend added, but it won't use
configuration from environment variables or command line options - it is
the job of the proxy program to make a complete config.

This config generated must have this extra parameter

-   _root - root to use for the backend

And it may have this parameter

-   _obscure - comma separated strings for parameters to obscure

If password authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "pass": "mypassword"
    }

If public-key authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "public_key": "AAAAB3NzaC1yc2EAAAADAQABAAABAQDuwESFdAe14hVS6omeyX7edc...JQdf"
    }

And as an example return this on STDOUT

    {
      "type": "sftp",
      "_root": "",
      "_obscure": "pass",
      "user": "me",
      "pass": "mypassword",
      "host": "sftp.example.com"
    }

This would mean that an SFTP backend would be created on the fly for the
user and pass/public_key returned in the output to the host given. Note
that since _obscure is set to pass, rclone will obscure the pass
parameter before creating the backend (which is required for sftp
backends).

The program can manipulate the supplied user in any way, for example to
make proxy to many different sftp backends, you could make the user be
user@example.com and then set the host to example.com in the output and
the user to user. For security you'd probably want to restrict the host
to a limited list.

Note that an internal cache is keyed on user so only use that for
configuration, don't use pass or public_key. This also means that if a
user's password or public-key is changed the cache will need to expire
(which takes 5 mins) before it takes effect.

This can be used to build general purpose proxies to any kind of backend
that rclone supports.

    rclone serve http remote:path [flags]

Options

          --addr stringArray                       IPaddress:Port or :Port to bind server to (default 127.0.0.1:8080)
          --allow-origin string                    Origin which cross-domain request (CORS) can be executed from
          --auth-proxy string                      A program to use to create the backend from the auth
          --baseurl string                         Prefix for URLs - leave blank for root
          --cert string                            TLS PEM key (concatenation of certificate and CA certificate)
          --client-ca string                       Client certificate authority to verify clients with
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --disable-zip                            Disable zip download of directories
          --file-perms FileMode                    File permissions (default 666)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for http
          --htpasswd string                        A htpasswd file - if not provided no authentication is done
          --key string                             TLS PEM Private key
          --link-perms FileMode                    Link permissions (default 666)
          --max-header-bytes int                   Maximum size of request header (default 4096)
          --min-tls-version string                 Minimum TLS version that is acceptable (default "tls1.0")
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --pass string                            Password for authentication
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --realm string                           Realm for authentication
          --salt string                            Password hashing salt (default "dlPL2MqE")
          --server-read-timeout Duration           Timeout for server reading data (default 1h0m0s)
          --server-write-timeout Duration          Timeout for server writing data (default 1h0m0s)
          --template string                        User-specified template
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --user string                            User name for authentication
          --user-from-header string                User name from a defined HTTP header
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve nfs

Serve the remote as an NFS mount

Synopsis

Create an NFS server that serves the given remote over the network.

This implements an NFSv3 server to serve any rclone remote via NFS.

The primary purpose for this command is to enable the mount command on
recent macOS versions where installing FUSE is very cumbersome.

This server does not implement any authentication so any client will be
able to access the data. To limit access, you can use serve nfs on the
loopback address or rely on secure tunnels (such as SSH) or use
firewalling.

For this reason, by default, a random TCP port is chosen and the
loopback interface is used for the listening address by default; meaning
that it is only available to the local machine. If you want other
machines to access the NFS mount over local network, you need to specify
the listening address and port using the --addr flag.

Modifying files through the NFS protocol requires VFS caching. Usually
you will need to specify --vfs-cache-mode in order to be able to write
to the mountpoint (full is recommended). If you don't specify VFS cache
mode, the mount will be read-only.

--nfs-cache-type controls the type of the NFS handle cache. By default
this is memory where new handles will be randomly allocated when needed.
These are stored in memory. If the server is restarted the handle cache
will be lost and connected NFS clients will get stale handle errors.

--nfs-cache-type disk uses an on disk NFS handle cache. Rclone hashes
the path of the object and stores it in a file named after the hash.
These hashes are stored on disk the directory controlled by --cache-dir
or the exact directory may be specified with --nfs-cache-dir. Using this
means that the NFS server can be restarted at will without affecting the
connected clients.

--nfs-cache-type symlink is similar to --nfs-cache-type disk in that it
uses an on disk cache, but the cache entries are held as symlinks.
Rclone will use the handle of the underlying file as the NFS handle
which improves performance. This sort of cache can't be backed up and
restored as the underlying handles will change. This is Linux only. It
requires running rclone as root or with CAP_DAC_READ_SEARCH. You can run
rclone with this extra permission by doing this to the rclone binary
sudo setcap cap_dac_read_search+ep /path/to/rclone.

--nfs-cache-handle-limit controls the maximum number of cached NFS
handles stored by the caching handler. This should not be set too low or
you may experience errors when trying to access files. The default is
1000000, but consider lowering this limit if the server's system
resource usage causes problems. This is only used by the memory type
cache.

To serve NFS over the network use following command:

    rclone serve nfs remote: --addr 0.0.0.0:$PORT --vfs-cache-mode=full

This specifies a port that can be used in the mount command. To mount
the server under Linux/macOS, use the following command:

    mount -t nfs -o port=$PORT,mountport=$PORT,tcp $HOSTNAME:/ path/to/mountpoint

Where $PORT is the same port number used in the serve nfs command and
$HOSTNAME is the network address of the machine that serve nfs was run
on.

If --vfs-metadata-extension is in use then for the --nfs-cache-type disk
and --nfs-cache-type cache the metadata files will have the file handle
of their parent file suffixed with 0x00, 0x00, 0x00, 0x01. This means
they can be looked up directly from the parent file handle is desired.

This command is only available on Unix platforms.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

    rclone serve nfs remote:path [flags]

Options

          --addr string                            IPaddress:Port or :Port to bind server to
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --file-perms FileMode                    File permissions (default 666)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for nfs
          --link-perms FileMode                    Link permissions (default 666)
          --nfs-cache-dir string                   The directory the NFS handle cache will use if set
          --nfs-cache-handle-limit int             max file handles cached simultaneously (min 5) (default 1000000)
          --nfs-cache-type memory|disk|symlink     Type of NFS handle cache to use (default memory)
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve restic

Serve the remote for restic's REST API.

Synopsis

Run a basic web server to serve a remote over restic's REST backend API
over HTTP. This allows restic to use rclone as a data storage mechanism
for cloud providers that restic does not support directly.

Restic is a command-line program for doing backups.

The server will log errors. Use -v to see access logs.

--bwlimit will be respected for file transfers. Use --stats to control
the stats printing.

Setting up rclone for use by restic

First set up a remote for your chosen cloud provider.

Once you have set up the remote, check it is working with, for example
"rclone lsd remote:". You may have called the remote something other
than "remote:" - just substitute whatever you called it in the following
instructions.

Now start the rclone restic server

    rclone serve restic -v remote:backup

Where you can replace "backup" in the above by whatever path in the
remote you wish to use.

By default this will serve on "localhost:8080" you can change this with
use of the --addr flag.

You might wish to start this server on boot.

Adding --cache-objects=false will cause rclone to stop caching objects
returned from the List call. Caching is normally desirable as it speeds
up downloading objects, saves transactions and uses very little memory.

Setting up restic to use rclone

Now you can follow the restic instructions on setting up restic.

Note that you will need restic 0.8.2 or later to interoperate with
rclone.

For the example above you will want to use "http://localhost:8080/" as
the URL for the REST server.

For example:

    $ export RESTIC_REPOSITORY=rest:http://localhost:8080/
    $ export RESTIC_PASSWORD=yourpassword
    $ restic init
    created restic backend 8b1a4b56ae at rest:http://localhost:8080/

    Please note that knowledge of your password is required to access
    the repository. Losing your password means that your data is
    irrecoverably lost.
    $ restic backup /path/to/files/to/backup
    scan [/path/to/files/to/backup]
    scanned 189 directories, 312 files in 0:00
    [0:00] 100.00%  38.128 MiB / 38.128 MiB  501 / 501 items  0 errors  ETA 0:00
    duration: 0:00
    snapshot 45c8fdd8 saved

Multiple repositories

Note that you can use the endpoint to host multiple repositories. Do
this by adding a directory name or path after the URL. Note that these
must end with /. Eg

    $ export RESTIC_REPOSITORY=rest:http://localhost:8080/user1repo/
    # backup user1 stuff
    $ export RESTIC_REPOSITORY=rest:http://localhost:8080/user2repo/
    # backup user2 stuff

Private repositories

The--private-repos flag can be used to limit users to repositories
starting with a path of /<username>/.

Server options

Use --addr to specify which IP address and port the server should listen
on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.

If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.

You can use a unix socket by setting the url to unix:///path/to/socket
or just by using an absolute path name.

--addr may be repeated to listen on multiple IPs/ports/sockets. Socket
activation, described further below, can also be used to accomplish the
same.

--server-read-timeout and --server-write-timeout can be used to control
the timeouts on the server. Note that this is the total time for a
transfer.

--max-header-bytes controls the maximum number of bytes the server will
accept in the HTTP header.

--baseurl controls the URL prefix that rclone serves from. By default
rclone will serve from the root. If you used --baseurl "/rclone" then
rclone would serve from a URL starting with "/rclone/". This is useful
if you wish to proxy rclone serve. Rclone automatically inserts leading
and trailing "/" on --baseurl, so --baseurl "rclone",
--baseurl "/rclone" and --baseurl "/rclone/" are all treated
identically.

--disable-zip may be set to disable the zipping download option.

Protocol

The server supports HTTP/1.1 and HTTP/2. HTTP/2 is used automatically
for TLS connections. For non-TLS connections, HTTP/2 cleartext (h2c) is
supported, allowing HTTP/2 without encryption.

TLS (SSL)

By default this will serve over http. If you want you can serve over
https. You will need to supply the --cert and --key flags. If you wish
to do client side certificate validation then you will need to supply
--client-ca also.

--cert must be set to the path of a file containing either a PEM encoded
certificate, or a concatenation of that with the CA certificate. --key
must be set to the path of a file with the PEM encoded private key. If
setting --client-ca, it should be set to the path of a file with PEM
encoded client certificate authority certificates.

--min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").

Socket activation

Instead of the listening addresses specified above, rclone will listen
to all FDs passed by the service manager, if any (and ignore any
arguments passed by --addr).

This allows rclone to be a socket-activated service. It can be
configured with .socket and .service unit files as described in
https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html.

Socket activation can be tested ad-hoc with the
systemd-socket-activatecommand

    systemd-socket-activate -l 8000 -- rclone serve

This will socket-activate rclone on the first connection to port 8000
over TCP.

Authentication

By default this will serve files without needing a login.

You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --user and --pass flags.

Alternatively, you can have the reverse proxy manage authentication and
use the username provided in the configured header with
--user-from-header (e.g., --user-from-header=x-remote-user). Ensure the
proxy is trusted and headers cannot be spoofed, as misconfiguration may
lead to unauthorized access.

If either of the above authentication methods is not configured and
client certificates are required by the --client-ca flag passed to the
server, the client certificate common name will be considered as the
username.

Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in
standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.

To create an htpasswd file:

    touch htpasswd
    htpasswd -B htpasswd user
    htpasswd -B htpasswd anotherUser

The password file can be updated while rclone is running.

Use --realm to set the authentication realm.

Use --salt to change the password hashing salt from the default.

    rclone serve restic remote:path [flags]

Options

          --addr stringArray                IPaddress:Port or :Port to bind server to (default 127.0.0.1:8080)
          --allow-origin string             Origin which cross-domain request (CORS) can be executed from
          --append-only                     Disallow deletion of repository data
          --baseurl string                  Prefix for URLs - leave blank for root
          --cache-objects                   Cache listed objects (default true)
          --cert string                     TLS PEM key (concatenation of certificate and CA certificate)
          --client-ca string                Client certificate authority to verify clients with
      -h, --help                            help for restic
          --htpasswd string                 A htpasswd file - if not provided no authentication is done
          --key string                      TLS PEM Private key
          --max-header-bytes int            Maximum size of request header (default 4096)
          --min-tls-version string          Minimum TLS version that is acceptable (default "tls1.0")
          --pass string                     Password for authentication
          --private-repos                   Users can only access their private repo
          --realm string                    Realm for authentication
          --salt string                     Password hashing salt (default "dlPL2MqE")
          --server-read-timeout Duration    Timeout for server reading data (default 1h0m0s)
          --server-write-timeout Duration   Timeout for server writing data (default 1h0m0s)
          --stdio                           Run an HTTP2 server on stdin/stdout
          --user string                     User name for authentication
          --user-from-header string         User name from a defined HTTP header

See the global flags page for global options not listed here.

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve s3

Serve remote:path over s3.

Synopsis

serve s3 implements a basic s3 server that serves a remote via s3. This
can be viewed with an s3 client, or you can make an s3 type remote to
read and write to it with rclone.

serve s3 is considered Experimental so use with care.

S3 server supports Signature Version 4 authentication. Just use
--auth-key accessKey,secretKey and set the Authorization header
correctly in the request. (See the AWS docs).

--auth-key can be repeated for multiple auth pairs. If --auth-key is not
provided then serve s3 will allow anonymous access.

Like all rclone flags --auth-key can be set via environment variables,
in this case RCLONE_AUTH_KEY. Since this flag can be repeated, the input
to RCLONE_AUTH_KEY is CSV encoded. Because the accessKey,secretKey has a
comma in, this means it needs to be in quotes.

    export RCLONE_AUTH_KEY='"user,pass"'
    rclone serve s3 ...

Or to supply multiple identities:

    export RCLONE_AUTH_KEY='"user1,pass1","user2,pass2"'
    rclone serve s3 ...

Setting this variable without quotes will produce an error.

Please note that some clients may require HTTPS endpoints. See the SSL
docs for more information.

This command uses the VFS directory cache. All the functionality will
work with --vfs-cache-mode off. Using --vfs-cache-mode full (or writes)
can be used to cache objects locally to improve performance.

Use --force-path-style=false if you want to use the bucket name as a
part of the hostname (such as mybucket.local)

Use --etag-hash if you want to change the hash uses for the ETag. Note
that using anything other than MD5 (the default) is likely to cause
problems for S3 clients which rely on the Etag being the MD5.

Quickstart

For a simple set up, to serve remote:path over s3, run the server like
this:

    rclone serve s3 --auth-key ACCESS_KEY_ID,SECRET_ACCESS_KEY remote:path

For example, to use a simple folder in the filesystem, run the server
with a command like this:

    rclone serve s3 --auth-key ACCESS_KEY_ID,SECRET_ACCESS_KEY local:/path/to/folder

The rclone.conf for the server could look like this:

    [local]
    type = local

The local configuration is optional though. If you run the server with a
remote:path like /path/to/folder (without the local: prefix and without
an rclone.conf file), rclone will fall back to a default configuration,
which will be visible as a warning in the logs. But it will run
nonetheless.

This will be compatible with an rclone (client) remote configuration
which is defined like this:

    [serves3]
    type = s3
    provider = Rclone
    endpoint = http://127.0.0.1:8080/
    access_key_id = ACCESS_KEY_ID
    secret_access_key = SECRET_ACCESS_KEY
    use_multipart_uploads = false

Note that setting use_multipart_uploads = false is to work around a bug
which will be fixed in due course.

Bugs

When uploading multipart files serve s3 holds all the parts in memory
(see #7453). This is a limitaton of the library rclone uses for serving
S3 and will hopefully be fixed at some point.

Multipart server side copies do not work (see #7454). These take a very
long time and eventually fail. The default threshold for multipart
server side copies is 5G which is the maximum it can be, so files above
this side will fail to be server side copied.

For a current list of serve s3 bugs see the serve s3 bug category on
GitHub.

Limitations

serve s3 will treat all directories in the root as buckets and ignore
all files in the root. You can use CreateBucket to create folders under
the root, but you can't create empty folders under other folders not in
the root.

When using PutObject or DeleteObject, rclone will automatically create
or clean up empty folders. If you don't want to clean up empty folders
automatically, use --no-cleanup.

When using ListObjects, rclone will use / when the delimiter is empty.
This reduces backend requests with no effect on most operations, but if
the delimiter is something other than / and empty, rclone will do a full
recursive search of the backend, which can take some time.

Versioning is not currently supported.

Metadata will only be saved in memory other than the rclone mtime
metadata which will be set as the modification time of the file.

Supported operations

serve s3 currently supports the following operations.

-   Bucket
    -   ListBuckets
    -   CreateBucket
    -   DeleteBucket
-   Object
    -   HeadObject
    -   ListObjects
    -   GetObject
    -   PutObject
    -   DeleteObject
    -   DeleteObjects
    -   CreateMultipartUpload
    -   CompleteMultipartUpload
    -   AbortMultipartUpload
    -   CopyObject
    -   UploadPart

Other operations will return error Unimplemented.

Authentication

By default this will serve files without needing a login.

You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --user and --pass flags.

Alternatively, you can have the reverse proxy manage authentication and
use the username provided in the configured header with
--user-from-header (e.g., --user-from-header=x-remote-user). Ensure the
proxy is trusted and headers cannot be spoofed, as misconfiguration may
lead to unauthorized access.

If either of the above authentication methods is not configured and
client certificates are required by the --client-ca flag passed to the
server, the client certificate common name will be considered as the
username.

Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in
standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.

To create an htpasswd file:

    touch htpasswd
    htpasswd -B htpasswd user
    htpasswd -B htpasswd anotherUser

The password file can be updated while rclone is running.

Use --realm to set the authentication realm.

Use --salt to change the password hashing salt from the default.

Server options

Use --addr to specify which IP address and port the server should listen
on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.

If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.

You can use a unix socket by setting the url to unix:///path/to/socket
or just by using an absolute path name.

--addr may be repeated to listen on multiple IPs/ports/sockets. Socket
activation, described further below, can also be used to accomplish the
same.

--server-read-timeout and --server-write-timeout can be used to control
the timeouts on the server. Note that this is the total time for a
transfer.

--max-header-bytes controls the maximum number of bytes the server will
accept in the HTTP header.

--baseurl controls the URL prefix that rclone serves from. By default
rclone will serve from the root. If you used --baseurl "/rclone" then
rclone would serve from a URL starting with "/rclone/". This is useful
if you wish to proxy rclone serve. Rclone automatically inserts leading
and trailing "/" on --baseurl, so --baseurl "rclone",
--baseurl "/rclone" and --baseurl "/rclone/" are all treated
identically.

--disable-zip may be set to disable the zipping download option.

Protocol

The server supports HTTP/1.1 and HTTP/2. HTTP/2 is used automatically
for TLS connections. For non-TLS connections, HTTP/2 cleartext (h2c) is
supported, allowing HTTP/2 without encryption.

TLS (SSL)

By default this will serve over http. If you want you can serve over
https. You will need to supply the --cert and --key flags. If you wish
to do client side certificate validation then you will need to supply
--client-ca also.

--cert must be set to the path of a file containing either a PEM encoded
certificate, or a concatenation of that with the CA certificate. --key
must be set to the path of a file with the PEM encoded private key. If
setting --client-ca, it should be set to the path of a file with PEM
encoded client certificate authority certificates.

--min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").

Socket activation

Instead of the listening addresses specified above, rclone will listen
to all FDs passed by the service manager, if any (and ignore any
arguments passed by --addr).

This allows rclone to be a socket-activated service. It can be
configured with .socket and .service unit files as described in
https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html.

Socket activation can be tested ad-hoc with the
systemd-socket-activatecommand

    systemd-socket-activate -l 8000 -- rclone serve

This will socket-activate rclone on the first connection to port 8000
over TCP.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

    rclone serve s3 remote:path [flags]

Options

          --addr stringArray                       IPaddress:Port or :Port to bind server to (default 127.0.0.1:8080)
          --allow-origin string                    Origin which cross-domain request (CORS) can be executed from
          --auth-key stringArray                   Set key pair for v4 authorization: access_key_id,secret_access_key
          --auth-proxy string                      A program to use to create the backend from the auth
          --baseurl string                         Prefix for URLs - leave blank for root
          --cert string                            TLS PEM key (concatenation of certificate and CA certificate)
          --client-ca string                       Client certificate authority to verify clients with
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --etag-hash string                       Which hash to use for the ETag, or auto or blank for off (default "MD5")
          --file-perms FileMode                    File permissions (default 666)
          --force-path-style                       If true use path style access if false use virtual hosted style (default true)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for s3
          --htpasswd string                        A htpasswd file - if not provided no authentication is done
          --key string                             TLS PEM Private key
          --link-perms FileMode                    Link permissions (default 666)
          --max-header-bytes int                   Maximum size of request header (default 4096)
          --min-tls-version string                 Minimum TLS version that is acceptable (default "tls1.0")
          --no-checksum                            Don't compare checksums on up/download
          --no-cleanup                             Not to cleanup empty folder after object is deleted
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --pass string                            Password for authentication
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --realm string                           Realm for authentication
          --salt string                            Password hashing salt (default "dlPL2MqE")
          --server-read-timeout Duration           Timeout for server reading data (default 1h0m0s)
          --server-write-timeout Duration          Timeout for server writing data (default 1h0m0s)
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --user string                            User name for authentication
          --user-from-header string                User name from a defined HTTP header
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve sftp

Serve the remote over SFTP.

Synopsis

Run an SFTP server to serve a remote over SFTP. This can be used with an
SFTP client or you can make a remote of type sftp to use with it.

You can use the filter flags (e.g. --include, --exclude) to control what
is served.

The server will respond to a small number of shell commands, mainly
md5sum, sha1sum and df, which enable it to provide support for checksums
and the about feature when accessed from an sftp remote.

Note that this server uses standard 32 KiB packet payload size, which
means you must not configure the client to expect anything else, e.g.
with the chunk_size option on an sftp remote.

The server will log errors. Use -v to see access logs.

--bwlimit will be respected for file transfers. Use --stats to control
the stats printing.

You must provide some means of authentication, either with
--user/--pass, an authorized keys file (specify location with
--authorized-keys - the default is the same as ssh), an --auth-proxy, or
set the --no-auth flag for no authentication when logging in.

If you don't supply a host --key then rclone will generate rsa, ecdsa
and ed25519 variants, and cache them for later use in rclone's cache
directory (see rclone help flags cache-dir) in the "serve-sftp"
directory.

By default the server binds to localhost:2022 - if you want it to be
reachable externally then supply --addr :2022 for example.

This also supports being run with socket activation, in which case it
will listen on the first passed FD. It can be configured with .socket
and .service unit files as described in
https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html.

Socket activation can be tested ad-hoc with the
systemd-socket-activatecommand:

    systemd-socket-activate -l 2222 -- rclone serve sftp :local:vfs/

This will socket-activate rclone on the first connection to port 2222
over TCP.

Note that the default of --vfs-cache-mode off is fine for the rclone
sftp backend, but it may not be with other SFTP clients.

If --stdio is specified, rclone will serve SFTP over stdio, which can be
used with sshd via ~/.ssh/authorized_keys, for example:

    restrict,command="rclone serve sftp --stdio ./photos" ssh-rsa ...

On the client you need to set --transfers 1 when using --stdio.
Otherwise multiple instances of the rclone server are started by OpenSSH
which can lead to "corrupted on transfer" errors. This is the case
because the client chooses indiscriminately which server to send
commands to while the servers all have different views of the state of
the filing system.

The "restrict" in authorized_keys prevents SHA1SUMs and MD5SUMs from
being used. Omitting "restrict" and using --sftp-path-override to enable
checksumming is possible but less secure and you could use the SFTP
server provided by OpenSSH in this case.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

Auth Proxy

If you supply the parameter --auth-proxy /path/to/program then rclone
will use that program to generate backends on the fly which then are
used to authenticate incoming requests. This uses a simple JSON based
protocol with input on STDIN and output on STDOUT.

PLEASE NOTE: --auth-proxy and --authorized-keys cannot be used together,
if --auth-proxy is set the authorized keys option will be ignored.

There is an example program bin/test_proxy.py in the rclone source code.

The program's job is to take a user and pass on the input and turn those
into the config for a backend on STDOUT in JSON format. This config will
have any default parameters for the backend added, but it won't use
configuration from environment variables or command line options - it is
the job of the proxy program to make a complete config.

This config generated must have this extra parameter

-   _root - root to use for the backend

And it may have this parameter

-   _obscure - comma separated strings for parameters to obscure

If password authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "pass": "mypassword"
    }

If public-key authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "public_key": "AAAAB3NzaC1yc2EAAAADAQABAAABAQDuwESFdAe14hVS6omeyX7edc...JQdf"
    }

And as an example return this on STDOUT

    {
      "type": "sftp",
      "_root": "",
      "_obscure": "pass",
      "user": "me",
      "pass": "mypassword",
      "host": "sftp.example.com"
    }

This would mean that an SFTP backend would be created on the fly for the
user and pass/public_key returned in the output to the host given. Note
that since _obscure is set to pass, rclone will obscure the pass
parameter before creating the backend (which is required for sftp
backends).

The program can manipulate the supplied user in any way, for example to
make proxy to many different sftp backends, you could make the user be
user@example.com and then set the host to example.com in the output and
the user to user. For security you'd probably want to restrict the host
to a limited list.

Note that an internal cache is keyed on user so only use that for
configuration, don't use pass or public_key. This also means that if a
user's password or public-key is changed the cache will need to expire
(which takes 5 mins) before it takes effect.

This can be used to build general purpose proxies to any kind of backend
that rclone supports.

    rclone serve sftp remote:path [flags]

Options

          --addr string                            IPaddress:Port or :Port to bind server to (default "localhost:2022")
          --auth-proxy string                      A program to use to create the backend from the auth
          --authorized-keys string                 Authorized keys file (default "~/.ssh/authorized_keys")
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --file-perms FileMode                    File permissions (default 666)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for sftp
          --key stringArray                        SSH private host key file (Can be multi-valued, leave blank to auto generate)
          --link-perms FileMode                    Link permissions (default 666)
          --no-auth                                Allow connections with no authentication if set
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --pass string                            Password for authentication
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --stdio                                  Run an sftp server on stdin/stdout
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --user string                            User name for authentication
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone serve webdav

Serve remote:path over WebDAV.

Synopsis

Run a basic WebDAV server to serve a remote over HTTP via the WebDAV
protocol. This can be viewed with a WebDAV client, through a web
browser, or you can make a remote of type WebDAV to read and write it.

WebDAV options

--etag-hash

This controls the ETag header. Without this flag the ETag will be based
on the ModTime and Size of the object.

If this flag is set to "auto" then rclone will choose the first
supported hash on the backend or you can use a named hash such as "MD5"
or "SHA-1". Use the hashsum command to see the full list.

Access WebDAV on Windows

WebDAV shared folder can be mapped as a drive on Windows, however the
default settings prevent it. Windows will fail to connect to the server
using insecure Basic authentication. It will not even display any login
dialog. Windows requires SSL / HTTPS connection to be used with Basic.
If you try to connect via Add Network Location Wizard you will get the
following error: "The folder you entered does not appear to be valid.
Please choose another". However, you still can connect if you set the
following registry key on a client machine:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters\BasicAuthLevel
to 2. The BasicAuthLevel can be set to the following values:

    0 - Basic authentication disabled
    1 - Basic authentication enabled for SSL connections only
    2 - Basic authentication enabled for SSL connections and for non-SSL connections

If required, increase the FileSizeLimitInBytes to a higher value.
Navigate to the Services interface, then restart the WebClient service.

Access Office applications on WebDAV

Navigate to following registry
HKEY_CURRENT_USER\Software\Microsoft\Office\[14.0/15.0/16.0]\Common\Internet
Create a new DWORD BasicAuthLevel with value 2.

    0 - Basic authentication disabled
    1 - Basic authentication enabled for SSL connections only
    2 - Basic authentication enabled for SSL and for non-SSL connections

https://learn.microsoft.com/en-us/office/troubleshoot/powerpoint/office-opens-blank-from-sharepoint

Serving over a unix socket

You can serve the webdav on a unix socket like this:

    rclone serve webdav --addr unix:///tmp/my.socket remote:path

and connect to it like this using rclone and the webdav backend:

    rclone --webdav-unix-socket /tmp/my.socket --webdav-url http://localhost lsf :webdav:

Note that there is no authentication on http protocol - this is expected
to be done by the permissions on the socket.

Symlinks / Junction points

The webdav protocol does not support symlinks or junction points and by
default rclone will skip them completely.

You can use -L to get rclone to follow symlinks or you can use
--local-links to make rclone show .rclonelink files in place of the
symlinks.

NB Do not use --links as since v1.69 this applies to the VFS layer too,
use --local-links which only applies to the local backend only.

Server options

Use --addr to specify which IP address and port the server should listen
on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.

If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.

You can use a unix socket by setting the url to unix:///path/to/socket
or just by using an absolute path name.

--addr may be repeated to listen on multiple IPs/ports/sockets. Socket
activation, described further below, can also be used to accomplish the
same.

--server-read-timeout and --server-write-timeout can be used to control
the timeouts on the server. Note that this is the total time for a
transfer.

--max-header-bytes controls the maximum number of bytes the server will
accept in the HTTP header.

--baseurl controls the URL prefix that rclone serves from. By default
rclone will serve from the root. If you used --baseurl "/rclone" then
rclone would serve from a URL starting with "/rclone/". This is useful
if you wish to proxy rclone serve. Rclone automatically inserts leading
and trailing "/" on --baseurl, so --baseurl "rclone",
--baseurl "/rclone" and --baseurl "/rclone/" are all treated
identically.

--disable-zip may be set to disable the zipping download option.

Protocol

The server supports HTTP/1.1 and HTTP/2. HTTP/2 is used automatically
for TLS connections. For non-TLS connections, HTTP/2 cleartext (h2c) is
supported, allowing HTTP/2 without encryption.

TLS (SSL)

By default this will serve over http. If you want you can serve over
https. You will need to supply the --cert and --key flags. If you wish
to do client side certificate validation then you will need to supply
--client-ca also.

--cert must be set to the path of a file containing either a PEM encoded
certificate, or a concatenation of that with the CA certificate. --key
must be set to the path of a file with the PEM encoded private key. If
setting --client-ca, it should be set to the path of a file with PEM
encoded client certificate authority certificates.

--min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").

Socket activation

Instead of the listening addresses specified above, rclone will listen
to all FDs passed by the service manager, if any (and ignore any
arguments passed by --addr).

This allows rclone to be a socket-activated service. It can be
configured with .socket and .service unit files as described in
https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html.

Socket activation can be tested ad-hoc with the
systemd-socket-activatecommand

    systemd-socket-activate -l 8000 -- rclone serve

This will socket-activate rclone on the first connection to port 8000
over TCP.

Template

--template allows a user to specify a custom markup template for HTTP
and WebDAV serve functions. The server exports the following markup to
be used within the template to server pages:

  -----------------------------------------------------------------------
  Parameter              Subparameter              Description
  ---------------------- ------------------------- ----------------------
  .Name                                            The full path of a
                                                   file/directory.

  .Title                                           Directory listing of
                                                   '.Name'.

  .Sort                                            The current sort used.
                                                   This is changeable via
                                                   '?sort=' parameter.
                                                   Possible values:
                                                   namedirfirst, name,
                                                   size, time (default
                                                   namedirfirst).

  .Order                                           The current ordering
                                                   used. This is
                                                   changeable via
                                                   '?order=' parameter.
                                                   Possible values: asc,
                                                   desc (default asc).

  .Query                                           Currently unused.

  .Breadcrumb                                      Allows for creating a
                                                   relative navigation.

                         .Link                     The link of the Text
                                                   relative to the root.

                         .Text                     The Name of the
                                                   directory.

  .Entries                                         Information about a
                                                   specific
                                                   file/directory.

                         .URL                      The url of an entry.

                         .Leaf                     Currently same as
                                                   '.URL' but intended to
                                                   be just the name.

                         .IsDir                    Boolean for if an
                                                   entry is a directory
                                                   or not.

                         .Size                     Size in bytes of the
                                                   entry.

                         .ModTime                  The UTC timestamp of
                                                   an entry.
  -----------------------------------------------------------------------

The server also makes the following functions available so that they can
be used within the template. These functions help extend the options for
dynamic rendering of HTML. They can be used to render HTML based on
specific conditions.

  -----------------------------------------------------------------------
  Function                            Description
  ----------------------------------- -----------------------------------
  afterEpoch                          Returns the time since the epoch
                                      for the given time.

  contains                            Checks whether a given substring is
                                      present or not in a given string.

  hasPrefix                           Checks whether the given string
                                      begins with the specified prefix.

  hasSuffix                           Checks whether the given string end
                                      with the specified suffix.
  -----------------------------------------------------------------------

Authentication

By default this will serve files without needing a login.

You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --user and --pass flags.

Alternatively, you can have the reverse proxy manage authentication and
use the username provided in the configured header with
--user-from-header (e.g., --user-from-header=x-remote-user). Ensure the
proxy is trusted and headers cannot be spoofed, as misconfiguration may
lead to unauthorized access.

If either of the above authentication methods is not configured and
client certificates are required by the --client-ca flag passed to the
server, the client certificate common name will be considered as the
username.

Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in
standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.

To create an htpasswd file:

    touch htpasswd
    htpasswd -B htpasswd user
    htpasswd -B htpasswd anotherUser

The password file can be updated while rclone is running.

Use --realm to set the authentication realm.

Use --salt to change the password hashing salt from the default.

VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk filing
system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the VFS
layer has to deal with that. Because there is no one right way of doing
this there are various options explained below.

The VFS layer also implements a directory cache - this caches info about
files and directories (but not the data) in memory.

VFS Directory Cache

Using the --dir-cache-time flag, you can control how long a directory
should be considered up to date and not refreshed from the backend.
Changes made through the VFS will appear immediately or invalidate the
cache.

        --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
        --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)

However, changes made directly on the cloud storage by the web interface
or a different copy of rclone will only be picked up once the directory
cache expires if the backend configured does not support polling for
changes. If the backend supports polling, changes will be picked up
within the polling interval.

You can send a SIGHUP signal to rclone for it to flush all directory
caches, regardless of how old they are. Assuming only one rclone
instance is running, you can reset the cache like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

VFS File Buffering

The --buffer-size flag determines the amount of memory, that will be
used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file. The buffer
will only use memory for data that is downloaded but not not yet read.
If the buffer is empty, only a small amount of memory will be used.

The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file. See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

        --cache-dir string                     Directory rclone will use for caching.
        --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
        --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
        --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
        --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
        --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
        --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.

Note that files are written back to the remote only when they are closed
and if they haven't been accessed for --vfs-write-back seconds. If
rclone is quit or dies with files that haven't been uploaded, these will
be uploaded next time rclone is run with the same flags.

If using --vfs-cache-max-size or --vfs-cache-min-free-space note that
the cache may exceed these quotas for two reasons. Firstly because it is
only checked every --vfs-cache-poll-interval. Secondly because open
files cannot be evicted from the cache. When --vfs-cache-max-size or
--vfs-cache-min-free-space is exceeded, rclone will attempt to evict the
least accessed files from the cache first. rclone will start with files
that haven't been accessed for the longest. This cache flushing strategy
is efficient and more relevant files are likely to remain cached.

The --vfs-cache-max-age will evict files from the cache after the set
time since last access has passed. The default value of 1 hour will
start evicting files from cache that haven't been accessed for 1 hour.
When a cached file is accessed the 1 hour timer is reset to 0 and will
wait for 1 more hour before evicting. Specify the time with standard
notation, s, m, h, d, w .

You should not run two copies of rclone using the same VFS cache with
the same or overlapping remotes if using --vfs-cache-mode > off. This
can potentially cause data corruption if you do. You can work around
this by giving each rclone its own cache hierarchy with --cache-dir. You
don't need to worry about this if the remotes in use don't overlap.

--vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote
and write directly to the remote without caching anything on disk.

This will mean some operations are not possible

-   Files can't be opened for both read AND write
-   Files opened for write can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files open for read with O_TRUNC will be opened write only
-   Files open for write only will behave as if O_TRUNC was supplied
-   Open modes O_APPEND, O_TRUNC are ignored
-   If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

-   Files opened for write only can't be seeked
-   Existing files opened for write must have O_TRUNC set
-   Files opened for write only will ignore O_APPEND, O_TRUNC
-   If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone will
keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to --vfs-cache-mode writes.

When reading a file rclone will read --buffer-size plus --vfs-read-ahead
bytes ahead. The --buffer-size is buffered in memory whereas the
--vfs-read-ahead is buffered on disk.

When using this mode it is recommended that --buffer-size is not set too
large and --vfs-read-ahead is set large if required.

IMPORTANT not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache directory
is on a filesystem which doesn't support sparse files and it will log an
ERROR message if one is detected.

Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file copy
has changed relative to a remote file. Fingerprints are made from:

-   size
-   modification time
-   hash

where available on an object.

On some backends some of these attributes are slow to read (they take an
extra API call per object, or extra work per object).

For example hash is slow with the local and sftp backends as they have
to read the entire file and hash it, and modtime is slow with the s3,
swift, ftp and qinqstor backends because they need to do an extra API
call to fetch it.

If you use the --vfs-fast-fingerprint flag then rclone will not include
the slow operations in the fingerprint. This makes the fingerprinting
less accurate but much faster and will improve the opening time of
cached files.

If you are running a vfs cache over local, s3 or swift backends then
using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of the
files in the cache may be invalidated and the files will need to be
downloaded again.

VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the chunk
specified. This can reduce the used download quota for some remotes by
requesting only chunks from the remote that are actually read, at the
cost of an increased number of requests.

These flags control the chunking:

        --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
        --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
        --vfs-read-chunk-streams int            The number of parallel streams to read at once

The chunking behaves differently depending on the
--vfs-read-chunk-streams parameter.

--vfs-read-chunk-streams == 0

Rclone will start reading a chunk of size --vfs-read-chunk-size, and
then double the size for each read. When --vfs-read-chunk-size-limit is
specified, and greater than --vfs-read-chunk-size, the chunk size for
each open file will get doubled only until the specified value is
reached. If the value is "off", which is the default, the limit is
disabled and the chunk size will grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.

Setting --vfs-read-chunk-size to 0 or "off" disables chunked reading.

The chunks will not be buffered in memory.

--vfs-read-chunk-streams > 0

Rclone reads --vfs-read-chunk-streams chunks of size
--vfs-read-chunk-size concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links or
very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
--vfs-read-chunk-size and --vfs-read-chunk-streams as these will depend
on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be --vfs-read-chunk-streams 16 and --vfs-read-chunk-size 4M.
In testing with AWS S3 the performance scaled roughly as the
--vfs-read-chunk-streams setting.

Similar settings should work for high latency links, but depending on
the latency they may need more --vfs-read-chunk-streams in order to get
the throughput.

VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the chunked reading feature.

In particular S3 and Swift benefit hugely from the --no-modtime flag (or
use --use-server-modtime for a slightly different effect) as each read
of the modification time takes a transaction.

        --no-checksum     Don't compare checksums on up/download.
        --no-modtime      Don't read/write the modification time (can speed things up).
        --no-seek         Don't allow seeking in files.
        --read-only       Only allow read-only access.

Sometimes rclone is delivered reads or writes out of order. Rather than
seeking rclone will wait a short time for the in sequence read or write
to come in. These flags only come into effect when not using an on disk
cache file.

        --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
        --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)

When using VFS write caching (--vfs-cache-mode with value writes or
full), the global flag --transfers can be set to adjust the number of
parallel uploads of modified files from the cache (the related global
flag --checkers has no effect on the VFS).

        --transfers int  Number of file transfers to run in parallel (default 4)

Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

        --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
        --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a file
which appears as a symlink link-to-file.txt would be stored on cloud
storage as link-to-file.txt.rclonelink and the contents would be the
path to the symlink destination.

Note that --links enables symlink translation globally in rclone - this
includes any backend which supports the concept (for example the local
backend). --vfs-links just enables it for the VFS layer.

This scheme is compatible with that used by the local backend with the
--local-links flag.

The --vfs-links flag has been designed for rclone mount, rclone nfsmount
and rclone serve nfs.

It hasn't been tested with the other rclone serve commands yet.

A limitation of the current implementation is that it expects the caller
to resolve sub-symlinks. For example given this directory tree

    .
    ├── dir
    │   └── file.txt
    └── linked-dir -> dir

The VFS will correctly resolve linked-dir but not linked-dir/file.txt.
This is not a problem for the tested commands but may be for other
commands.

Note that there is an outstanding issue with symlink support issue #8245
with duplicate files being created when symlinks are moved into
directories where there is a file of the same name (or vice versa).

VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only by
case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case
used to create the file is preserved and available for programs to
query. It is not allowed for two files in the same directory to differ
only by case.

Usually file systems on macOS are case-insensitive. It is possible to
make macOS file systems case-sensitive but that is not the default.

The --vfs-case-insensitive VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the
remote as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers to an
existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the
same name is not found but a name differing only by case exists, rclone
will transparently fixup the name. This fixup happens only when an
existing file is requested. Case sensitivity of file names created anew
by rclone is controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the
target) may differ from case sensitivity of a file system presented by
rclone (the source). The flag controls whether "fixup" is performed to
satisfy the target.

If the flag is not provided on the command line, then its default value
depends on the operating system where rclone runs: "true" on Windows and
macOS, "false" otherwise. If the flag is provided without a value, then
it is "true".

The --no-unicode-normalization flag controls whether a similar "fixup"
is performed for filenames that differ but are canonically equivalent
with respect to unicode. Unicode normalization can be particularly
helpful for users of macOS, which prefers form NFD instead of the NFC
used by most other platforms. It is therefore highly recommended to keep
the default of false on macOS, to avoid encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the
--vfs-block-norm-dupes flag allows hiding these duplicates. This comes
with a performance tradeoff, as rclone will have to scan the entire
directory for duplicates when listing a directory. For this reason, it
is recommended to leave this disabled if not needed. However, macOS
users may wish to consider using it, as otherwise, if a remote directory
contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the
mount, and both will appear to be editable, however, editing either
version will actually result in only the NFD version getting edited
under the hood. --vfs-block- norm-dupes prevents this confusion by
detecting this scenario, hiding the duplicates, and logging an error,
similar to how this is handled in rclone sync.

VFS Disk Options

This flag allows you to manually set the statistics about the filing
system. It can be useful when those statistics cannot be read correctly
automatically.

        --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)

Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running df on the
filesystem, then pass the flag --vfs-used-is-size to rclone. With this
flag set, instead of relying on the backend to report this information,
rclone will scan the whole remote similar to rclone size and compute the
total used space itself.

WARNING: Contrary to rclone size, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots
of API calls resulting in extra charges. Use it as a last resort and
only with caching.

VFS Metadata

If you use the --vfs-metadata-extension flag you can get the VFS to
expose files which contain the metadata as a JSON blob. These files will
not appear in the directory listing, but can be stat-ed and opened and
once they have been they will appear in directory listings until the
directory cache expires.

Note that some backends won't create metadata unless you pass in the
--metadata flag.

For example, using rclone mount with
--metadata --vfs-metadata-extension .metadata we get

    $ ls -l /mnt/
    total 1048577
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

    $ cat /mnt/1G.metadata
    {
            "atime": "2025-03-04T17:34:22.317069787Z",
            "btime": "2025-03-03T16:03:37.708253808Z",
            "gid": "1000",
            "mode": "100664",
            "mtime": "2025-03-03T16:03:39.640238323Z",
            "uid": "1000"
    }

    $ ls -l /mnt/
    total 1048578
    -rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
    -rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata

If the file has no metadata it will be returned as {} and if there is an
error reading the metadata the error will be returned as
{"error":"error string"}.

Auth Proxy

If you supply the parameter --auth-proxy /path/to/program then rclone
will use that program to generate backends on the fly which then are
used to authenticate incoming requests. This uses a simple JSON based
protocol with input on STDIN and output on STDOUT.

PLEASE NOTE: --auth-proxy and --authorized-keys cannot be used together,
if --auth-proxy is set the authorized keys option will be ignored.

There is an example program bin/test_proxy.py in the rclone source code.

The program's job is to take a user and pass on the input and turn those
into the config for a backend on STDOUT in JSON format. This config will
have any default parameters for the backend added, but it won't use
configuration from environment variables or command line options - it is
the job of the proxy program to make a complete config.

This config generated must have this extra parameter

-   _root - root to use for the backend

And it may have this parameter

-   _obscure - comma separated strings for parameters to obscure

If password authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "pass": "mypassword"
    }

If public-key authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

    {
      "user": "me",
      "public_key": "AAAAB3NzaC1yc2EAAAADAQABAAABAQDuwESFdAe14hVS6omeyX7edc...JQdf"
    }

And as an example return this on STDOUT

    {
      "type": "sftp",
      "_root": "",
      "_obscure": "pass",
      "user": "me",
      "pass": "mypassword",
      "host": "sftp.example.com"
    }

This would mean that an SFTP backend would be created on the fly for the
user and pass/public_key returned in the output to the host given. Note
that since _obscure is set to pass, rclone will obscure the pass
parameter before creating the backend (which is required for sftp
backends).

The program can manipulate the supplied user in any way, for example to
make proxy to many different sftp backends, you could make the user be
user@example.com and then set the host to example.com in the output and
the user to user. For security you'd probably want to restrict the host
to a limited list.

Note that an internal cache is keyed on user so only use that for
configuration, don't use pass or public_key. This also means that if a
user's password or public-key is changed the cache will need to expire
(which takes 5 mins) before it takes effect.

This can be used to build general purpose proxies to any kind of backend
that rclone supports.

    rclone serve webdav remote:path [flags]

Options

          --addr stringArray                       IPaddress:Port or :Port to bind server to (default 127.0.0.1:8080)
          --allow-origin string                    Origin which cross-domain request (CORS) can be executed from
          --auth-proxy string                      A program to use to create the backend from the auth
          --baseurl string                         Prefix for URLs - leave blank for root
          --cert string                            TLS PEM key (concatenation of certificate and CA certificate)
          --client-ca string                       Client certificate authority to verify clients with
          --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
          --dir-perms FileMode                     Directory permissions (default 777)
          --disable-dir-list                       Disable HTML directory list on GET request for a directory
          --disable-zip                            Disable zip download of directories
          --etag-hash string                       Which hash to use for the ETag, or auto or blank for off
          --file-perms FileMode                    File permissions (default 666)
          --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
      -h, --help                                   help for webdav
          --htpasswd string                        A htpasswd file - if not provided no authentication is done
          --key string                             TLS PEM Private key
          --link-perms FileMode                    Link permissions (default 666)
          --max-header-bytes int                   Maximum size of request header (default 4096)
          --min-tls-version string                 Minimum TLS version that is acceptable (default "tls1.0")
          --no-checksum                            Don't compare checksums on up/download
          --no-modtime                             Don't read/write the modification time (can speed things up)
          --no-seek                                Don't allow seeking in files
          --pass string                            Password for authentication
          --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
          --read-only                              Only allow read-only access
          --realm string                           Realm for authentication
          --salt string                            Password hashing salt (default "dlPL2MqE")
          --server-read-timeout Duration           Timeout for server reading data (default 1h0m0s)
          --server-write-timeout Duration          Timeout for server writing data (default 1h0m0s)
          --template string                        User-specified template
          --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
          --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
          --user string                            User name for authentication
          --user-from-header string                User name from a defined HTTP header
          --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
          --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
          --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
          --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
          --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
          --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
          --vfs-case-insensitive                   If a file name not found, find a case insensitive match
          --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
          --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
          --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
          --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
          --vfs-metadata-extension string          Set the extension to read metadata from
          --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
          --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
          --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
          --vfs-read-chunk-streams int             The number of parallel streams to read at once
          --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
          --vfs-refresh                            Refreshes the directory cache recursively in the background on start
          --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
          --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
          --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See Also

-   rclone serve - Serve a remote over a protocol.

rclone settier

Changes storage class/tier of objects in remote.

Synopsis

Changes storage tier or class at remote if supported. Few cloud storage
services provides different storage classes on objects, for example AWS
S3 and Glacier, Azure Blob storage - Hot, Cool and Archive, Google Cloud
Storage, Regional Storage, Nearline, Coldline etc.

Note that, certain tier changes make objects not available to access
immediately. For example tiering to archive in azure blob storage makes
objects in frozen state, user can restore by setting tier to Hot/Cool,
similarly S3 to Glacier makes object inaccessible.true

You can use it to tier single object

    rclone settier Cool remote:path/file

Or use rclone filters to set tier on only specific files

    rclone --include "*.txt" settier Hot remote:path/dir

Or just provide remote directory and all files in directory will be
tiered

    rclone settier tier remote:path/dir

    rclone settier tier remote:path [flags]

Options

      -h, --help   help for settier

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone test

Run a test command

Synopsis

Rclone test is used to run test commands.

Select which test command you want with the subcommand, eg

    rclone test memory remote:

Each subcommand has its own options which you can see in their help.

NB Be careful running these commands, they may do strange things so
reading their documentation first is recommended.

Options

      -h, --help   help for test

See the global flags page for global options not listed here.

See Also

-   rclone - Show help for rclone commands, flags and backends.
-   rclone test changenotify - Log any change notify requests for the
    remote passed in.
-   rclone test histogram - Makes a histogram of file name characters.
-   rclone test info - Discovers file name or other limitations for
    paths.
-   rclone test makefile - Make files with random contents of the size
    given
-   rclone test makefiles - Make a random file hierarchy in a directory
-   rclone test memory - Load all the objects at remote:path into memory
    and report memory stats.
-   rclone test speed - Run a speed test to the remote

rclone test changenotify

Log any change notify requests for the remote passed in.

    rclone test changenotify remote: [flags]

Options

      -h, --help                     help for changenotify
          --poll-interval Duration   Time to wait between polling for changes (default 10s)

See the global flags page for global options not listed here.

See Also

-   rclone test - Run a test command

rclone test histogram

Makes a histogram of file name characters.

Synopsis

This command outputs JSON which shows the histogram of characters used
in filenames in the remote:path specified.

The data doesn't contain any identifying information but is useful for
the rclone developers when developing filename compression.

    rclone test histogram [remote:path] [flags]

Options

      -h, --help   help for histogram

See the global flags page for global options not listed here.

See Also

-   rclone test - Run a test command

rclone test info

Discovers file name or other limitations for paths.

Synopsis

Discovers what filenames and upload methods are possible to write to the
paths passed in and how long they can be. It can take some time. It will
write test files into the remote:path passed in. It outputs a bit of go
code for each one.

NB this can create undeletable files and other hazards - use with care!

    rclone test info [remote:path]+ [flags]

Options

          --all                    Run all tests
          --check-base32768        Check can store all possible base32768 characters
          --check-control          Check control characters
          --check-length           Check max filename length
          --check-normalization    Check UTF-8 Normalization
          --check-streaming        Check uploads with indeterminate file size
      -h, --help                   help for info
          --keep-test-files        Keep test files after execution
          --upload-wait Duration   Wait after writing a file (default 0s)
          --write-json string      Write results to file

See the global flags page for global options not listed here.

See Also

-   rclone test - Run a test command

rclone test makefile

Make files with random contents of the size given

    rclone test makefile <size> [<file>]+ [flags]

Options

          --ascii      Fill files with random ASCII printable bytes only
          --chargen    Fill files with a ASCII chargen pattern
      -h, --help       help for makefile
          --pattern    Fill files with a periodic pattern
          --seed int   Seed for the random number generator (0 for random) (default 1)
          --sparse     Make the files sparse (appear to be filled with ASCII 0x00)
          --zero       Fill files with ASCII 0x00

See the global flags page for global options not listed here.

See Also

-   rclone test - Run a test command

rclone test makefiles

Make a random file hierarchy in a directory

    rclone test makefiles <dir> [flags]

Options

          --ascii                      Fill files with random ASCII printable bytes only
          --chargen                    Fill files with a ASCII chargen pattern
          --files int                  Number of files to create (default 1000)
          --files-per-directory int    Average number of files per directory (default 10)
          --flat                       If set create all files in the root directory
      -h, --help                       help for makefiles
          --max-depth int              Maximum depth of directory hierarchy (default 10)
          --max-file-size SizeSuffix   Maximum size of files to create (default 100)
          --max-name-length int        Maximum size of file names (default 12)
          --min-file-size SizeSuffix   Minimum size of file to create
          --min-name-length int        Minimum size of file names (default 4)
          --pattern                    Fill files with a periodic pattern
          --seed int                   Seed for the random number generator (0 for random) (default 1)
          --sparse                     Make the files sparse (appear to be filled with ASCII 0x00)
          --zero                       Fill files with ASCII 0x00

See the global flags page for global options not listed here.

See Also

-   rclone test - Run a test command

rclone test memory

Load all the objects at remote:path into memory and report memory stats.

    rclone test memory remote:path [flags]

Options

      -h, --help   help for memory

See the global flags page for global options not listed here.

See Also

-   rclone test - Run a test command

rclone test speed

Run a speed test to the remote

Synopsis

Run a speed test to the remote.

This command runs a series of uploads and downloads to the remote,
measuring and printing the speed of each test using varying file sizes
and numbers of files.

Test time can be innaccurate with small file caps and large files. As it
uses the results of an initial test to determine how many files to use
in each subsequent test.

It is recommended to use -q flag for a simpler output. e.g.:

    rclone test speed remote: -q

NB This command will create and delete files on the remote in a randomly
named directory which will be automatically removed on a clean exit.

You can use the --json flag to only print the results in JSON format.

    rclone test speed <remote> [flags]

Options

          --ascii                Fill files with random ASCII printable bytes only
          --chargen              Fill files with a ASCII chargen pattern
          --file-cap int         Maximum number of files to use in each test (default 100)
      -h, --help                 help for speed
          --json                 Output only results in JSON format
          --large SizeSuffix     Size of large files (default 1Gi)
          --medium SizeSuffix    Size of medium files (default 10Mi)
          --pattern              Fill files with a periodic pattern
          --seed int             Seed for the random number generator (0 for random) (default 1)
          --small SizeSuffix     Size of small files (default 1Ki)
          --sparse               Make the files sparse (appear to be filled with ASCII 0x00)
          --test-time Duration   Length for each test to run (default 15s)
          --zero                 Fill files with ASCII 0x00

See the global flags page for global options not listed here.

See Also

-   rclone test - Run a test command

rclone touch

Create new file or change file modification time.

Synopsis

Set the modification time on file(s) as specified by remote:path to have
the current time.

If remote:path does not exist then a zero sized file will be created,
unless --no-create or --recursive is provided.

If --recursive is used then recursively sets the modification time on
all existing files that is found under the path. Filters are supported,
and you can test with the --dry-run or the --interactive/-i flag. This
will touch --transfers files concurrently.

If --timestamp is used then sets the modification time to that time
instead of the current time. Times may be specified as one of:

-   'YYMMDD' - e.g. 17.10.30
-   'YYYY-MM-DDTHH:MM:SS' - e.g. 2006-01-02T15:04:05
-   'YYYY-MM-DDTHH:MM:SS.SSS' - e.g. 2006-01-02T15:04:05.123456789

Note that value of --timestamp is in UTC. If you want local time then
add the --localtime flag.

Metadata can be added when creating a new file with --metadata-set. For
example: rclone touch remote:path -M --metadata-set key=value

    rclone touch remote:path [flags]

Options

      -h, --help               help for touch
          --localtime          Use localtime for timestamp, not UTC
      -C, --no-create          Do not create the file if it does not exist (implied with --recursive)
      -R, --recursive          Recursively touch all files
      -t, --timestamp string   Use specified time instead of the current time of day

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Important Options

Important flags useful for most commands

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

rclone tree

List the contents of the remote in a tree like fashion.

Synopsis

Lists the contents of a remote in a similar way to the unix tree
command.

For example

    $ rclone tree remote:path
    /
    ├── file1
    ├── file2
    ├── file3
    └── subdir
        ├── file4
        └── file5

    1 directories, 5 files

You can use any of the filtering options with the tree command (e.g.
--include and --exclude. You can also use --fast-list.

The tree command has many options for controlling the listing which are
compatible with the tree command, for example you can include file sizes
with --size. Note that not all of them have short options as they
conflict with rclone's short options.

For a more interactive navigation of the remote see the ncdu command.

    rclone tree remote:path [flags]

Options

      -a, --all             All files are listed (list . files too)
      -d, --dirs-only       List directories only
          --dirsfirst       List directories before files (-U disables)
          --full-path       Print the full path prefix for each file
      -h, --help            help for tree
          --level int       Descend only level directories deep
      -D, --modtime         Print the date of last modification.
          --noindent        Don't print indentation lines
          --noreport        Turn off file/directory count at end of tree listing
      -o, --output string   Output to file instead of stdout
      -p, --protections     Print the protections for each file.
      -Q, --quote           Quote filenames with double quotes.
      -s, --size            Print the size in bytes of each file.
          --sort string     Select sort: name,version,size,mtime,ctime
          --sort-ctime      Sort files by last status change time
      -t, --sort-modtime    Sort files by last modification time
      -r, --sort-reverse    Reverse the order of the sort
      -U, --unsorted        Leave files unsorted
          --version         Sort files alphanumerically by version

Options shared with other commands are described next. See the global
flags page for global options not listed here.

Filter Options

Flags for filtering directory listings

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing Options

Flags for listing directories

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

See Also

-   rclone - Show help for rclone commands, flags and backends.

Copying single files

rclone normally syncs or copies directories. However, if the source
remote points to a file, rclone will just copy that file. The
destination remote must point to a directory - rclone will give the
error
Failed to create file system for "remote:file": is a file not a directory
if it isn't.

For example, suppose you have a remote with a file in called test.jpg,
then you could copy just that file like this

    rclone copy remote:test.jpg /tmp/download

The file test.jpg will be placed inside /tmp/download.

This is equivalent to specifying

    rclone copy --files-from /tmp/files remote: /tmp/download

Where /tmp/files contains the single line

    test.jpg

It is recommended to use copy when copying individual files, not sync.
They have pretty much the same effect but copy will use a lot less
memory.

Syntax of remote paths

The syntax of the paths passed to the rclone command are as follows.

/path/to/dir

This refers to the local file system.

On Windows \ may be used instead of / in local paths only, non local
paths must use /. See local filesystem documentation for more about
Windows-specific paths.

These paths needn't start with a leading / - if they don't then they
will be relative to the current directory.

remote:path/to/dir

This refers to a directory path/to/dir on remote: as defined in the
config file (configured with rclone config).

remote:/path/to/dir

On most backends this is refers to the same directory as
remote:path/to/dir and that format should be preferred. On a very small
number of remotes (FTP, SFTP, Dropbox for business) this will refer to a
different directory. On these, paths without a leading / will refer to
your "home" directory and paths with a leading / will refer to the root.

:backend:path/to/dir

This is an advanced form for creating remotes on the fly. backend should
be the name or prefix of a backend (the type in the config file) and all
the configuration for the backend should be provided on the command line
(or in environment variables).

Here are some examples:

    rclone lsd --http-url https://pub.rclone.org :http:

To list all the directories in the root of https://pub.rclone.org/.

    rclone lsf --http-url https://example.com :http:path/to/dir

To list files and directories in https://example.com/path/to/dir/

    rclone copy --http-url https://example.com :http:path/to/dir /tmp/dir

To copy files and directories in https://example.com/path/to/dir to
/tmp/dir.

    rclone copy --sftp-host example.com :sftp:path/to/dir /tmp/dir

To copy files and directories from example.com in the relative directory
path/to/dir to /tmp/dir using sftp.

Connection strings

The above examples can also be written using a connection string syntax,
so instead of providing the arguments as command line parameters
--http-url https://pub.rclone.org they are provided as part of the
remote specification as a kind of connection string.

    rclone lsd ":http,url='https://pub.rclone.org':"
    rclone lsf ":http,url='https://example.com':path/to/dir"
    rclone copy ":http,url='https://example.com':path/to/dir" /tmp/dir
    rclone copy :sftp,host=example.com:path/to/dir /tmp/dir

These can apply to modify existing remotes as well as create new remotes
with the on the fly syntax. This example is equivalent to adding the
--drive-shared-with-me parameter to the remote gdrive:.

    rclone lsf "gdrive,shared_with_me:path/to/dir"

The major advantage to using the connection string style syntax is that
it only applies to the remote, not to all the remotes of that type of
the command line. A common confusion is this attempt to copy a file
shared on google drive to the normal drive which does not work because
the --drive-shared-with-me flag applies to both the source and the
destination.

    rclone copy --drive-shared-with-me gdrive:shared-file.txt gdrive:

However using the connection string syntax, this does work.

    rclone copy "gdrive,shared_with_me:shared-file.txt" gdrive:

Note that the connection string only affects the options of the
immediate backend. If for example gdriveCrypt is a crypt based on
gdrive, then the following command will not work as intended, because
shared_with_me is ignored by the crypt backend:

    rclone copy "gdriveCrypt,shared_with_me:shared-file.txt" gdriveCrypt:

The connection strings have the following syntax

    remote,parameter=value,parameter2=value2:path/to/dir
    :backend,parameter=value,parameter2=value2:path/to/dir

If the parameter has a : or , then it must be placed in quotes " or ',
so

    remote,parameter="colon:value",parameter2="comma,value":path/to/dir
    :backend,parameter='colon:value',parameter2='comma,value':path/to/dir

If a quoted value needs to include that quote, then it should be
doubled, so

    remote,parameter="with""quote",parameter2='with''quote':path/to/dir

This will make parameter be with"quote and parameter2 be with'quote.

If you leave off the =parameter then rclone will substitute =true which
works very well with flags. For example, to use s3 configured in the
environment you could use:

    rclone lsd :s3,env_auth:

Which is equivalent to

    rclone lsd :s3,env_auth=true:

Note that on the command line you might need to surround these
connection strings with " or ' to stop the shell interpreting any
special characters within them.

If you are a shell master then you'll know which strings are OK and
which aren't, but if you aren't sure then enclose them in " and use ' as
the inside quote. This syntax works on all OSes.

    rclone copy ":http,url='https://example.com':path/to/dir" /tmp/dir

On Linux/macOS some characters are still interpreted inside " strings in
the shell (notably \ and $ and ") so if your strings contain those you
can swap the roles of " and ' thus. (This syntax does not work on
Windows.)

    rclone copy ':http,url="https://example.com":path/to/dir' /tmp/dir

You can use rclone config string to convert a remote into a connection
string.

Connection strings, config and logging

If you supply extra configuration to a backend by command line flag,
environment variable or connection string then rclone will add a suffix
based on the hash of the config to the name of the remote, eg

    rclone -vv lsf --s3-chunk-size 20M s3:

Has the log message

    DEBUG : s3: detected overridden config - adding "{Srj1p}" suffix to name

This is so rclone can tell the modified remote apart from the unmodified
remote when caching the backends.

This should only be noticeable in the logs.

This means that on the fly backends such as

    rclone -vv lsf :s3,env_auth:

Will get their own names

    DEBUG : :s3: detected overridden config - adding "{YTu53}" suffix to name

Valid remote names

Remote names are case sensitive, and must adhere to the following rules:

-   May contain number, letter, _, -, ., +, @ and space.
-   May not start with - or space.
-   May not end with space.

Starting with rclone version 1.61, any Unicode numbers and letters are
allowed, while in older versions it was limited to plain ASCII (0-9,
A-Z, a-z). If you use the same rclone configuration from different
shells, which may be configured with different character encoding, you
must be cautious to use characters that are possible to write in all of
them. This is mostly a problem on Windows, where the console
traditionally uses a non-Unicode character set - defined by the
so-called "code page".

Do not use single character names on Windows as it creates ambiguity
with Windows drives' names, e.g.: remote called C is indistinguishable
from C drive. Rclone will always assume that single letter name refers
to a drive.

Adding global configuration to a remote

It is possible to add global configuration to the remote configuration
which will be applied just before the remote is created.

This can be done in two ways. The first is to use override.var = value
in the config file or the connection string for a temporary change, and
the second is to use global.var = value in the config file or connection
string for a permanent change.

This is explained fully below.

override.var

This is used to override a global variable just for the duration of the
remote creation. It won't affect other remotes even if they are created
at the same time.

This is very useful for overriding networking config needed for just for
that remote. For example, say you have a remote which needs
--no-check-certificate as it is running on test infrastructure without a
proper certificate. You could supply the --no-check-certificate flag to
rclone, but this will affect all the remotes. To make it just affect
this remote you use an override. You could put this in the config file:

    [remote]
    type = XXX
    ...
    override.no_check_certificate = true

or use it in the connection string
remote,override.no_check_certificate=true: (or just
remote,override.no_check_certificate:).

Note how the global flag name loses its initial -- and gets - replaced
with _ and gets an override. prefix.

Not all global variables make sense to be overridden like this as the
config is only applied during the remote creation. Here is a non
exhaustive list of ones which might be useful:

-   bind_addr
-   ca_cert
-   client_cert
-   client_key
-   connect_timeout
-   disable_http2
-   disable_http_keep_alives
-   dump
-   expect_continue_timeout
-   headers
-   http_proxy
-   low_level_retries
-   max_connections
-   no_check_certificate
-   no_gzip
-   timeout
-   traffic_class
-   use_cookies
-   use_server_modtime
-   user_agent

An override.var will override all other config methods, but just for the
duration of the creation of the remote.

global.var

This is used to set a global variable for everything. The global
variable is set just before the remote is created.

This is useful for parameters (eg sync parameters) which can't be set as
an override. For example, say you have a remote where you would always
like to use the --checksum flag. You could supply the --checksum flag to
rclone on every command line, but instead you could put this in the
config file:

    [remote]
    type = XXX
    ...
    global.checksum = true

or use it in the connection string remote,global.checksum=true: (or just
remote,global.checksum:). This is equivalent to using the --checksum
flag.

Note how the global flag name loses its initial -- and gets - replaced
with _ and gets a global. prefix.

Any global variable can be set like this and it is exactly equivalent to
using the equivalent flag on the command line. This means it will affect
all uses of rclone.

If two remotes set the same global variable then the first one
instantiated will be overridden by the second one. A global.var will
override all other config methods when the remote is created.

Quoting and the shell

When you are typing commands to your computer you are using something
called the command line shell. This interprets various characters in an
OS specific way.

Here are some gotchas which may help users unfamiliar with the shell
rules

Linux / macOS

If your names have spaces or shell metacharacters (e.g. *, ?, $, ', ",
etc.) then you must quote them. Use single quotes ' by default.

    rclone copy 'Important files?' remote:backup

If you want to send a ' you will need to use ", e.g.

    rclone copy "O'Reilly Reviews" remote:backup

The rules for quoting metacharacters are complicated and if you want the
full details you'll have to consult the manual page for your shell.

Windows

If your names have spaces in you need to put them in ", e.g.

    rclone copy "E:\folder name\folder name\folder name" remote:backup

If you are using the root directory on its own then don't quote it (see
#464 for why), e.g.

    rclone copy E:\ remote:backup

Copying files or directories with : in the names

rclone uses : to mark a remote name. This is, however, a valid filename
component in non-Windows OSes. The remote name parser will only search
for a : up to the first / so if you need to act on a file or directory
like this then use the full path starting with a /, or use ./ as a
current directory prefix.

So to sync a directory called sync:me to a remote called remote: use

    rclone sync --interactive ./sync:me remote:path

or

    rclone sync --interactive /full/path/to/sync:me remote:path

Server-side copy

Most remotes (but not all - see the overview) support server-side copy.

This means if you want to copy one folder to another then rclone won't
download all the files and re-upload them; it will instruct the server
to copy them in place.

Eg

    rclone copy s3:oldbucket s3:newbucket

Will copy the contents of oldbucket to newbucket without downloading and
re-uploading.

Remotes which don't support server-side copy will download and re-upload
in this case.

Server-side copies are used with sync and copy and will be identified in
the log when using the -v flag. The move command may also use them if
remote doesn't support server-side move directly. This is done by
issuing a server-side copy then a delete which is much quicker than a
download and re-upload.

Server-side copies will only be attempted if the remote names are the
same.

This can be used when scripting to make aged backups efficiently, e.g.

    rclone sync --interactive remote:current-backup remote:previous-backup
    rclone sync --interactive /path/to/files remote:current-backup

Metadata support

Metadata is data about a file (or directory) which isn't the contents of
the file (or directory). Normally rclone only preserves the modification
time and the content (MIME) type where possible.

Rclone supports preserving all the available metadata on files and
directories when using the --metadata or -M flag.

Exactly what metadata is supported and what that support means depends
on the backend. Backends that support metadata have a metadata section
in their docs and are listed in the features table (Eg local, s3)

Some backends don't support metadata, some only support metadata on
files and some support metadata on both files and directories.

Rclone only supports a one-time sync of metadata. This means that
metadata will be synced from the source object to the destination object
only when the source object has changed and needs to be re-uploaded. If
the metadata subsequently changes on the source object without changing
the object itself then it won't be synced to the destination object.
This is in line with the way rclone syncs Content-Type without the
--metadata flag.

Using --metadata when syncing from local to local will preserve file
attributes such as file mode, owner, extended attributes (not Windows).

Note that arbitrary metadata may be added to objects using the
--metadata-set key=value flag when the object is first uploaded. This
flag can be repeated as many times as necessary.

The --metadata-mapper flag can be used to pass the name of a program in
which can transform metadata when it is being copied from source to
destination.

Rclone supports --metadata-set and --metadata-mapper when doing
server-side Move and server-side Copy, but not when doing server side
DirMove (renaming a directory) as this would involve recursing into the
directory. Note that you can disable DirMove with --disable DirMove and
rclone will revert back to using Move for each individual object where
--metadata-set and --metadata-mapper are supported.

Types of metadata

Metadata is divided into two type. System metadata and User metadata.

Metadata which the backend uses itself is called system metadata. For
example on the local backend the system metadata uid will store the user
ID of the file when used on a unix based platform.

Arbitrary metadata is called user metadata and this can be set however
is desired.

When objects are copied from backend to backend, they will attempt to
interpret system metadata if it is supplied. Metadata may change from
being user metadata to system metadata as objects are copied between
different backends. For example copying an object from s3 sets the
content-type metadata. In a backend which understands this (like
azureblob) this will become the Content-Type of the object. In a backend
which doesn't understand this (like the local backend) this will become
user metadata. However should the local object be copied back to s3, the
Content-Type will be set correctly.

Metadata framework

Rclone implements a metadata framework which can read metadata from an
object and write it to the object when (and only when) it is being
uploaded.

This metadata is stored as a dictionary with string keys and string
values.

There are some limits on the names of the keys (these may be clarified
further in the future).

-   must be lower case
-   may be a-z 0-9 containing . - or _
-   length is backend dependent

Each backend can provide system metadata that it understands. Some
backends can also store arbitrary user metadata.

Where possible the key names are standardized, so, for example, it is
possible to copy object metadata from s3 to azureblob for example and
metadata will be translated appropriately.

Some backends have limits on the size of the metadata and rclone will
give errors on upload if they are exceeded.

Metadata preservation

The goal of the implementation is to

1.  Preserve metadata if at all possible
2.  Interpret metadata if at all possible

The consequences of 1 is that you can copy an S3 object to a local disk
then back to S3 losslessly. Likewise you can copy a local file with file
attributes and xattrs from local disk to s3 and back again losslessly.

The consequence of 2 is that you can copy an S3 object with metadata to
Azureblob (say) and have the metadata appear on the Azureblob object
also.

Standard system metadata

Here is a table of standard system metadata which, if appropriate, a
backend may implement.

  ----------------------------------------------------------------------------------------------
  key                                description           example
  ---------------------------------- --------------------- -------------------------------------
  mode                               File type and mode:   0100664
                                     octal, unix style     

  uid                                User ID of owner:     500
                                     decimal number        

  gid                                Group ID of owner:    500
                                     decimal number        

  rdev                               Device ID (if special 0
                                     file) => hexadecimal  

  atime                              Time of last access:  2006-01-02T15:04:05.999999999Z07:00
                                     RFC 3339              

  mtime                              Time of last          2006-01-02T15:04:05.999999999Z07:00
                                     modification: RFC     
                                     3339                  

  btime                              Time of file creation 2006-01-02T15:04:05.999999999Z07:00
                                     (birth): RFC 3339     

  utime                              Time of file upload:  2006-01-02T15:04:05.999999999Z07:00
                                     RFC 3339              

  cache-control                      Cache-Control header  no-cache

  content-disposition                Content-Disposition   inline
                                     header                

  content-encoding                   Content-Encoding      gzip
                                     header                

  content-language                   Content-Language      en-US
                                     header                

  content-type                       Content-Type header   text/plain
  ----------------------------------------------------------------------------------------------

The metadata keys mtime and content-type will take precedence if
supplied in the metadata over reading the Content-Type or modification
time of the source object.

Hashes are not included in system metadata as there is a well defined
way of reading those already.

Options

Rclone has a number of options to control its behaviour. These are
documented below, and in the flags page.

Options that take parameters can have the values passed in two ways,
--option=value or --option value. However boolean (true/false) options
behave slightly differently to the other options in that --boolean sets
the option to true and the absence of the flag sets it to false. It is
also possible to specify --boolean=false or --boolean=true. Note that
--boolean false is not valid - this is parsed as --boolean and the false
is parsed as an extra command line argument for rclone.

String values that are recognized as special identifiers, e.g. the name
of the log level to set with option --log-level, are case insensitive,
e.g. --log-level ERROR and --log-level error are identical.

Options documented to take a stringArray parameter accept multiple
values. To pass more than one value, repeat the option; for example:
--include value1 --include value2. Other options may only accept a
single value, and should only be specified once, but where the specified
parameter may indicate a list of values separated by space or comma.
Such options are documented to take a CommaSepList parameter, if comma
separated, and SpaceSepList if space separated, although some may also
have different parameters such as DumpFlags or just string and the help
text explains that this will be interpreted as a list.

Floating-point values with fractional part must use period (.) as
decimal separator, common in English-speaking countries, regardless of
your configured system locale. Parameter type float accepts decimal and
hexadecimal floating-point numbers as defined by the Go syntax for
floating-point literals.

Time and duration options

Options that take a Time or Duration parameter must be specified as a
formatted string describing an absolute or relative time. Note that both
Time and Duration parameter types can be expressed as either absolute or
relative time, just with different interpretations, e.g. a relative time
will be treated as an offset from the current time when passed as a Time
value.

An absolute time can be specified as a string in one of the following
formats:

-   RFC3339 - e.g. 2006-01-02T15:04:05Z or 2006-01-02T15:04:05+07:00
-   ISO8601 Date and time, local timezone - 2006-01-02T15:04:05
-   ISO8601 Date and time, local timezone - 2006-01-02 15:04:05
-   ISO8601 Date - 2006-01-02 (YYYY-MM-DD)

A relative time is a string with a, possibly signed, sequence of decimal
numbers, each with optional fraction, and each with a unit suffix. If
the string only contains a single number, then the unit suffix is
optional and will default to seconds, i.e. a plain decimal value will be
treated as a number of seconds. The following suffixes are valid:

-   ms - Milliseconds
-   s - Seconds
-   m - Minutes
-   h - Hours
-   d - Days
-   w - Weeks
-   M - Months
-   y - Years

Examples: "10", "300ms", "-1.5h" or "2h45m".

Size options

Options that take a SizeSuffix parameter can be specified as an integer
value, which will then be assumed to represent a KiB value (multiples of
1024 bytes) by default. The interpretation can be changed by appending a
suffix: B for Byte, K for KiB, M for MiB, G for GiB, T for TiB and P for
PiB. These are the binary units, e.g. 1, 2**10, 2**20, 2**30
respectively.

See also --human-readable.

Main options

--backup-dir string

When using sync, copy or move, any files which would have been
overwritten or deleted are moved in their original hierarchy into this
directory.

If --suffix is set, then the moved files will have the suffix added to
them. If there is a file with the same path (after the suffix has been
added) in the directory, then it will be overwritten.

The remote in use must support server-side move or copy and you must use
the same remote as the destination of the sync. The backup directory
must not overlap the destination directory without it being excluded by
a filter rule.

For example

    rclone sync --interactive /path/to/local remote:current --backup-dir remote:old

will sync /path/to/local to remote:current, but for any files which
would have been updated or deleted will be stored in remote:old.

If running rclone from a script you might want to use today's date as
the directory name passed to --backup-dir to store the old files, or you
might want to pass --suffix with today's date. This can be done with
--suffix $(date +%F) in bash, and
--suffix $(Get-Date -Format 'yyyy-MM-dd') in PowerShell.

See --compare-dest and --copy-dest.

--bind string

Local address to bind to for outgoing connections. This can be an IPv4
address (1.2.3.4), an IPv6 address (1234::789A) or host name. If the
host name doesn't resolve or resolves to more than one IP address it
will give an error.

You can use --bind 0.0.0.0 to force rclone to use IPv4 addresses and
--bind ::0 to force rclone to use IPv6 addresses.

--bwlimit BwTimetable

This option controls the bandwidth limit. For example

    --bwlimit 10M

would mean limit the upload and download bandwidth to 10 MiB/s. NB this
is bytes per second not bits per second. To use a single limit, specify
the desired bandwidth in KiB/s, or use a suffix B|K|M|G|T|P. The default
is 0 which means to not limit bandwidth.

The upload and download bandwidth can be specified separately, as
--bwlimit UP:DOWN, so

    --bwlimit 10M:100k

would mean limit the upload bandwidth to 10 MiB/s and the download
bandwidth to 100 KiB/s. Either limit can be "off" meaning no limit, so
to just limit the upload bandwidth you would use

    --bwlimit 10M:off

this would limit the upload bandwidth to 10 MiB/s but the download
bandwidth would be unlimited.

When specified as above the bandwidth limits last for the duration of
run of the rclone binary.

It is also possible to specify a "timetable" of limits, which will cause
certain limits to be applied at certain times. To specify a timetable,
format your entries as
WEEKDAY-HH:MM,BANDWIDTH WEEKDAY-HH:MM,BANDWIDTH... where: WEEKDAY is
optional element.

-   BANDWIDTH can be a single number, e.g.100k or a pair of numbers for
    upload:download, e.g.10M:1M.
-   WEEKDAY can be written as the whole word or only using the first 3
    characters. It is optional.
-   HH:MM is an hour from 00:00 to 23:59.

Entries can be separated by spaces or semicolons.

Note: Semicolons can be used as separators instead of spaces to avoid
parsing issues in environments like Docker.

An example of a typical timetable to avoid link saturation during
daytime working hours could be:

Using spaces as separators:
--bwlimit "08:00,512k 12:00,10M 13:00,512k 18:00,30M 23:00,off"

Using semicolons as separators:
--bwlimit "08:00,512k;12:00,10M;13:00,512k;18:00,30M;23:00,off"

In these examples, the transfer bandwidth will be set to 512 KiB/s at
8am every day. At noon, it will rise to 10 MiB/s, and drop back to 512
KiB/sec at 1pm. At 6pm, the bandwidth limit will be set to 30 MiB/s, and
at 11pm it will be completely disabled (full speed). Anything between
11pm and 8am will remain unlimited.

An example of timetable with WEEKDAY could be:

Using spaces as separators:
--bwlimit "Mon-00:00,512 Fri-23:59,10M Sat-10:00,1M Sun-20:00,off"

Using semicolons as separators:
--bwlimit "Mon-00:00,512;Fri-23:59,10M;Sat-10:00,1M;Sun-20:00,off"

It means that, the transfer bandwidth will be set to 512 KiB/s on
Monday. It will rise to 10 MiB/s before the end of Friday. At 10:00 on
Saturday it will be set to 1 MiB/s. From 20:00 on Sunday it will be
unlimited.

Timeslots without WEEKDAY are extended to the whole week. So this
example:

    --bwlimit "Mon-00:00,512 12:00,1M Sun-20:00,off"

Is equivalent to this:

    --bwlimit "Mon-00:00,512Mon-12:00,1M Tue-12:00,1M Wed-12:00,1M Thu-12:00,1M Fri-12:00,1M Sat-12:00,1M Sun-12:00,1M Sun-20:00,off"

Bandwidth limit apply to the data transfer for all backends. For most
backends the directory listing bandwidth is also included (exceptions
being the non HTTP backends, ftp, sftp and storj).

Note that the units are Byte/s, not bit/s. Typically connections are
measured in bit/s - to convert divide by 8. For example, let's say you
have a 10 Mbit/s connection and you wish rclone to use half of it - 5
Mbit/s. This is 5/8 = 0.625 MiB/s so you would use a --bwlimit 0.625M
parameter for rclone.

On Unix systems (Linux, macOS, …) the bandwidth limiter can be toggled
by sending a SIGUSR2 signal to rclone. This allows to remove the
limitations of a long running rclone transfer and to restore it back to
the value specified with --bwlimit quickly when needed. Assuming there
is only one rclone instance running, you can toggle the limiter like
this:

    kill -SIGUSR2 $(pidof rclone)

If you configure rclone with a remote control then you can use change
the bwlimit dynamically:

    rclone rc core/bwlimit rate=1M

--bwlimit-file BwTimetable

This option controls per file bandwidth limit. For the options see the
--bwlimit flag.

For example use this to allow no transfers to be faster than 1 MiB/s

    --bwlimit-file 1M

This can be used in conjunction with --bwlimit.

Note that if a schedule is provided the file will use the schedule in
effect at the start of the transfer.

--buffer-size SizeSuffix

Use this sized buffer to speed up file transfers. Each --transfer will
use this much memory for buffering.

When using mount or cmount each open file descriptor will use this much
memory for buffering. See the mount documentation for more details.

Set to 0 to disable the buffering for the minimum memory usage.

Note that the memory allocation of the buffers is influenced by the
--use-mmap flag.

--cache-dir string

Specify the directory rclone will use for caching, to override the
default.

Default value is depending on operating system:

-   Windows %LocalAppData%\rclone, if LocalAppData is defined.
-   macOS $HOME/Library/Caches/rclone if HOME is defined.
-   Unix $XDG_CACHE_HOME/rclone if XDG_CACHE_HOME is defined, else
    $HOME/.cache/rclone if HOME is defined.
-   Fallback (on all OS) to $TMPDIR/rclone, where TMPDIR is the value
    from --temp-dir.

You can use the config paths command to see the current value.

Cache directory is heavily used by the VFS File Caching mount feature,
but also by serve, GUI and other parts of rclone.

--check-first

If this flag is set then in a sync, copy or move, rclone will do all the
checks to see whether files need to be transferred before doing any of
the transfers. Normally rclone would start running transfers as soon as
possible.

This flag can be useful on IO limited systems where transfers interfere
with checking.

It can also be useful to ensure perfect ordering when using --order-by.

If both --check-first and --order-by are set when doing rclone move then
rclone will use the transfer thread to delete source files which don't
need transferring. This will enable perfect ordering of the transfers
and deletes but will cause the transfer stats to have more items in than
expected.

Using this flag can use more memory as it effectively sets --max-backlog
to infinite. This means that all the info on the objects to transfer is
held in memory before the transfers start.

--checkers int

Originally controlling just the number of file checkers to run in
parallel, e.g. by rclone copy. Now a fairly universal parallelism
control used by rclone in several places.

Note: checkers do the equality checking of files during a sync. For some
storage systems (e.g. S3, Swift, Dropbox) this can take a significant
amount of time so they are run in parallel.

The default is to run 8 checkers in parallel. However, in case of
slow-reacting backends you may need to lower (rather than increase) this
default by setting --checkers to 4 or less threads. This is especially
advised if you are experiencing backend server crashes during file
checking phase (e.g. on subsequent or top-up backups where little or no
file copying is done and checking takes up most of the time). Increase
this setting only with utmost care, while monitoring your server health
and file checking throughput.

-c, --checksum

Normally rclone will look at modification time and size of files to see
if they are equal. If you set this flag then rclone will check the file
hash and size to determine if files are equal.

This is useful when the remote doesn't support setting modified time and
a more accurate sync is desired than just checking the file size.

This is very useful when transferring between remotes which store the
same hash type on the object, e.g. Drive and Swift. For details of which
remotes support which hash type see the table in the overview section.

Eg rclone --checksum sync s3:/bucket swift:/bucket would run much
quicker than without the --checksum flag.

When using this flag, rclone won't update mtimes of remote files if they
are incorrect as it would normally.

--color AUTO|NEVER|ALWAYS

Specify when colors (and other ANSI codes) should be added to the
output.

AUTO only allows ANSI codes when the output is a terminal. This is the
default.

NEVER never allow ANSI codes.

ALWAYS always add ANSI codes, regardless of the output format (terminal
or file).

--compare-dest stringArray

When using sync, copy or move, the specified paths are checked in
addition to the destination for files. If a file identical to the source
is found, that file is not copied from source. This is useful to copy
just files that have changed since the last backup.

You must use the same remote as the destination of the sync. The compare
directory must not overlap the destination directory.

See --copy-dest and --backup-dir.

--config string

Specify the location of the rclone configuration file, to override the
default. E.g. rclone config --config="rclone.conf".

The exact default is a bit complex to describe, due to changes
introduced through different versions of rclone while preserving
backwards compatibility, but in most cases it is as simple as:

-   %APPDATA%/rclone/rclone.conf on Windows
-   ~/.config/rclone/rclone.conf on other

The complete logic is as follows: Rclone will look for an existing
configuration file in any of the following locations, in priority order:

1.  rclone.conf (in program directory, where rclone executable is)
2.  %APPDATA%/rclone/rclone.conf (only on Windows)
3.  $XDG_CONFIG_HOME/rclone/rclone.conf (on all systems, including
    Windows)
4.  ~/.config/rclone/rclone.conf (see below for explanation of ~ symbol)
5.  ~/.rclone.conf

If no existing configuration file is found, then a new one will be
created in the following location:

-   On Windows: Location 2 listed above, except in the unlikely event
    that APPDATA is not defined, then location 4 is used instead.
-   On Unix: Location 3 if XDG_CONFIG_HOME is defined, else location 4.
-   Fallback to location 5 (on all OS), when the rclone directory cannot
    be created, but if also a home directory was not found then path
    .rclone.conf relative to current working directory will be used as a
    final resort.

The ~ symbol in paths above represent the home directory of the current
user on any OS, and the value is defined as following:

-   On Windows: %HOME% if defined, else %USERPROFILE%, or else
    %HOMEDRIVE%\%HOMEPATH%.
-   On Unix: $HOME if defined, else by looking up current user in
    OS-specific user database (e.g. passwd file), or else use the result
    from shell command cd && pwd.

If you run rclone config file you will see where the default location is
for you. Running rclone config touch will ensure a configuration file
exists, creating an empty one in the default location if there is none.

The fact that an existing file rclone.conf in the same directory as the
rclone executable is always preferred, means that it is easy to run in
"portable" mode by downloading rclone executable to a writable directory
and then create an empty file rclone.conf in the same directory.

If the location is set to empty string "" or path to a file with name
notfound, or the os null device represented by value NUL on Windows and
/dev/null on Unix systems, then rclone will keep the configuration file
in memory only.

You may see a log message "Config file not found - using defaults" if
there is no configuration file. This can be suppressed, e.g. if you are
using rclone entirely with on the fly remotes, by using memory-only
configuration file or by creating an empty configuration file, as
described above.

The file format is basic INI: Sections of text, led by a [section]
header and followed by key=value entries on separate lines. In rclone
each remote is represented by its own section, where the section name
defines the name of the remote. Options are specified as the key=value
entries, where the key is the option name without the --backend- prefix,
in lowercase and with _ instead of -. E.g. option --mega-hard-delete
corresponds to key hard_delete. Only backend options can be specified. A
special, and required, key type identifies the storage system, where the
value is the internal lowercase name as returned by command
rclone help backends. Comments are indicated by ; or # at the beginning
of a line.

Example:

    [megaremote]
    type = mega
    user = you@example.com
    pass = PDPcQVVjVtzFY-GTdDFozqBhTdsPg3qH

Note that passwords are in obscured form. Also, many storage systems
uses token-based authentication instead of passwords, and this requires
additional steps. It is easier, and safer, to use the interactive
command rclone config instead of manually editing the configuration
file.

The configuration file will typically contain login information, and
should therefore have restricted permissions so that only the current
user can read it. Rclone tries to ensure this when it writes the file.
You may also choose to encrypt the file.

When token-based authentication are used, the configuration file must be
writable, because rclone needs to update the tokens inside it.

To reduce risk of corrupting an existing configuration file, rclone will
not write directly to it when saving changes. Instead it will first
write to a new, temporary, file. If a configuration file already
existed, it will (on Unix systems) try to mirror its permissions to the
new file. Then it will rename the existing file to a temporary name as
backup. Next, rclone will rename the new file to the correct name,
before finally cleaning up by deleting the backup file.

If the configuration file path used by rclone is a symbolic link, then
this will be evaluated and rclone will write to the resolved path,
instead of overwriting the symbolic link. Temporary files used in the
process (described above) will be written to the same parent directory
as that of the resolved configuration file, but if this directory is
also a symbolic link it will not be resolved and the temporary files
will be written to the location of the directory symbolic link.

--contimeout Duration

Set the connection timeout. This should be in go time format which looks
like 5s for 5 seconds, 10m for 10 minutes, or 3h30m.

The connection timeout is the amount of time rclone will wait for a
connection to go through to a remote object storage system. It is 1m by
default.

--copy-dest stringArray

When using sync, copy or move, the specified paths are checked in
addition to the destination for files. This part is the same as
--compare-dest, but the difference is that with --copy-dest, if a file
identical to the source is found, that file is server-side copied from
the specified paths to the destination. This is useful for incremental
backup.

The remote in use must support server-side copy and you must use the
same remote as the destination of the sync. The compare directory must
not overlap the destination directory.

See --compare-dest and --backup-dir.

--dedupe-mode interactive|skip|first|newest|oldest|largest|smallest|rename|list

Mode to run dedupe command in. One of interactive, skip, first, newest,
oldest, largest, smallest, rename list. The default is interactive. See
the dedupe command for more information as to what these options mean.

--default-time Time

If a file or directory does have a modification time rclone can read
then rclone will display this fixed time instead.

The default is 2000-01-01 00:00:00 UTC. This can be configured in any of
the ways shown in time options.

For example --default-time 2020-06-01 to set the default time to the 1st
of June 2020 or --default-time 0s to set the default time to the time
rclone started up.

--disable string

This disables a comma separated list of optional features. For example
to disable server-side move and server-side copy use:

    --disable move,copy

The features can be put in any case.

To see a list of which features can be disabled use:

    --disable help

The features a remote has can be seen in JSON format with:

    rclone backend features remote:

See the overview features and optional features to get an idea of which
feature does what.

Note that some features can be set to true if they are true/false
feature flag features by prefixing them with !. For example the
CaseInsensitive feature can be forced to false with
--disable CaseInsensitive and forced to true with
--disable '!CaseInsensitive'. In general it isn't a good idea doing this
but it may be useful in extremis.

(Note that ! is a shell command which you will need to escape with
single quotes or a backslash on unix like platforms.)

This flag can be useful for debugging and in exceptional circumstances
(e.g. Google Drive limiting the total volume of server-side copies to
100 GiB/day).

--disable-http2

This stops rclone from trying to use HTTP/2 if available. This can
sometimes speed up transfers due to a problem in the Go standard
library.

--dscp string

Specify a DSCP value or name to use in connections. This could help QoS
system to identify traffic class. BE, EF, DF, LE, CSx and AFxx are
allowed.

See the description of differentiated services to get an idea of this
field. Setting this to 1 (LE) to identify the flow to SCAVENGER class
can avoid occupying too much bandwidth in a network with DiffServ
support (RFC 8622).

For example, if you configured QoS on router to handle LE properly.
Running:

    rclone copy --dscp LE from:/from to:/to

would make the priority lower than usual internet flows.

This option has no effect on Windows (see golang/go#42728).

-n, --dry-run

Do a trial run with no permanent changes. Use this to see what rclone
would do without actually doing it. Useful when setting up the sync
command which deletes files in the destination.

--expect-continue-timeout Duration

This specifies the amount of time to wait for a server's first response
headers after fully writing the request headers if the request has an
"Expect: 100-continue" header. Not all backends support using this.

Zero means no timeout and causes the body to be sent immediately,
without waiting for the server to approve. This time does not include
the time to send the request header.

The default is 1s. Set to 0 to disable.

--error-on-no-transfer

By default, rclone will exit with return code 0 if there were no errors.

This option allows rclone to return exit code 9 if no files were
transferred between the source and destination. This allows using rclone
in scripts, and triggering follow-on actions if data was copied, or
skipping if not.

NB: Enabling this option turns a usually non-fatal error into a
potentially fatal one - please check and adjust your scripts
accordingly!

--fix-case

Normally, a sync to a case insensitive dest (such as macOS / Windows)
will not result in a matching filename if the source and dest filenames
have casing differences but are otherwise identical. For example,
syncing hello.txt to HELLO.txt will normally result in the dest filename
remaining HELLO.txt. If --fix-case is set, then HELLO.txt will be
renamed to hello.txt to match the source.

NB:

-   directory names with incorrect casing will also be fixed
-   --fix-case will be ignored if --immutable is set
-   using --local-case-sensitive instead is not advisable; it will cause
    HELLO.txt to get deleted!
-   the old dest filename must not be excluded by filters. Be especially
    careful with --files-from, which does not respect --ignore-case!
-   on remotes that do not support server-side move, --fix-case will
    require downloading the file and re-uploading it. To avoid this, do
    not use --fix-case.

--fs-cache-expire-duration Duration

When using rclone via the API rclone caches created remotes for 5
minutes by default in the "fs cache". This means that if you do repeated
actions on the same remote then rclone won't have to build it again from
scratch, which makes it more efficient.

This flag sets the time that the remotes are cached for. If you set it
to 0 (or negative) then rclone won't cache the remotes at all.

Note that if you use some flags, eg --backup-dir and if this is set to 0
rclone may build two remotes (one for the source or destination and one
for the --backup-dir where it may have only built one before.

--fs-cache-expire-interval Duration

This controls how often rclone checks for cached remotes to expire. See
the --fs-cache-expire-duration documentation above for more info. The
default is 60s, set to 0 to disable expiry.

--header stringArray

Add an HTTP header for all transactions. The flag can be repeated to add
multiple headers.

If you want to add headers only for uploads use --header-upload and if
you want to add headers only for downloads use --header-download.

This flag is supported for all HTTP based backends even those not
supported by --header-upload and --header-download so may be used as a
workaround for those with care.

    rclone ls remote:test --header "X-Rclone: Foo" --header "X-LetMeIn: Yes"

--header-download stringArray

Add an HTTP header for all download transactions. The flag can be
repeated to add multiple headers.

    rclone sync --interactive s3:test/src ~/dst --header-download "X-Amz-Meta-Test: Foo" --header-download "X-Amz-Meta-Test2: Bar"

See GitHub issue #59 for currently supported backends.

--header-upload stringArray

Add an HTTP header for all upload transactions. The flag can be repeated
to add multiple headers.

    rclone sync --interactive ~/src s3:test/dst --header-upload "Content-Disposition: attachment; filename='cool.html'" --header-upload "X-Amz-Meta-Test: FooBar"

See GitHub issue #59 for currently supported backends.

--http-proxy string

Use this option to set an HTTP proxy for all HTTP based services to use.

Rclone also supports the standard HTTP proxy environment variables which
it will pick up automatically. The is the way the HTTP proxy will
normally be set but this flag can be used to override it.

--human-readable

Rclone commands output values for sizes (e.g. number of bytes) and
counts (e.g. number of files) either as raw numbers, or in
human-readable format.

In human-readable format the values are scaled to larger units,
indicated with a suffix shown after the value, and rounded to three
decimals. Rclone consistently uses binary units (powers of 2) for sizes
and decimal units (powers of 10) for counts. The unit prefix for size is
according to IEC standard notation, e.g. Ki for kibi. Used with byte
unit, 1 KiB means 1024 Byte. In list type of output, only the unit
prefix appended to the value (e.g. 9.762Ki), while in more textual
output the full unit is shown (e.g. 9.762 KiB). For counts the SI
standard notation is used, e.g. prefix k for kilo. Used with file
counts, 1k means 1000 files.

The various list commands output raw numbers by default. Option
--human-readable will make them output values in human-readable format
instead (with the short unit prefix).

The about command outputs human-readable by default, with a
command-specific option --full to output the raw numbers instead.

Command size outputs both human-readable and raw numbers in the same
output.

The tree command also considers --human-readable, but it will not use
the exact same notation as the other commands: It rounds to one decimal,
and uses single letter suffix, e.g. K instead of Ki. The reason for this
is that it relies on an external library.

The interactive command ncdu shows human-readable by default, and
responds to key u for toggling human-readable format.

--ignore-case-sync

Using this option will cause rclone to ignore the case of the files when
synchronizing so files will not be copied/synced when the existing
filenames are the same, even if the casing is different.

--ignore-checksum

Normally rclone will check that the checksums of transferred files
match, and give an error "corrupted on transfer" if they don't.

You can use this option to skip that check. You should only use it if
you have had the "corrupted on transfer" error message and you are sure
you might want to transfer potentially corrupted data.

--ignore-existing

Using this option will make rclone unconditionally skip all files that
exist on the destination, no matter the content of these files.

While this isn't a generally recommended option, it can be useful in
cases where your files change due to encryption. However, it cannot
correct partial transfers in case a transfer was interrupted.

When performing a move/moveto command, this flag will leave skipped
files in the source location unchanged when a file with the same name
exists on the destination.

--ignore-size

Normally rclone will look at modification time and size of files to see
if they are equal. If you set this flag then rclone will check only the
modification time. If --checksum is set then it only checks the
checksum.

It will also cause rclone to skip verifying the sizes are the same after
transfer.

This can be useful for transferring files to and from OneDrive which
occasionally misreports the size of image files (see #399 for more
info).

-I, --ignore-times

Using this option will cause rclone to unconditionally upload all files
regardless of the state of files on the destination.

Normally rclone would skip any files that have the same modification
time and are the same size (or have the same checksum if using
--checksum).

--immutable

Treat source and destination files as immutable and disallow
modification.

With this option set, files will be created and deleted as requested,
but existing files will never be updated. If an existing file does not
match between the source and destination, rclone will give the error
Source and destination exist but do not match: immutable file modified.

Note that only commands which transfer files (e.g. sync, copy or move)
are affected by this behavior, and only modification is disallowed.
Files may still be deleted explicitly (e.g. delete, purge) or implicitly
(e.g. sync, move). Use copy --immutable if it is desired to avoid
deletion as well as modification.

This can be useful as an additional layer of protection for immutable or
append-only data sets (notably backup archives), where modification
implies corruption and should not be propagated.

--inplace

The --inplace flag changes the behaviour of rclone when uploading files
to some backends (backends with the PartialUploads feature flag set)
such as:

-   local
-   ftp
-   sftp
-   pcloud

Without --inplace (the default) rclone will first upload to a temporary
file with an extension like this, where XXXXXX represents a hash of the
source file's fingerprint and .partial is --partial-suffix value
(.partial by default).

    original-file-name.XXXXXX.partial

(rclone will make sure the final name is no longer than 100 characters
by truncating the original-file-name part if necessary).

When the upload is complete, rclone will rename the .partial file to the
correct name, overwriting any existing file at that point. If the upload
fails then the .partial file will be deleted.

This prevents other users of the backend from seeing partially uploaded
files in their new names and prevents overwriting the old file until the
new one is completely uploaded.

If the --inplace flag is supplied, rclone will upload directly to the
final name without creating a .partial file.

This means that an incomplete file will be visible in the directory
listings while the upload is in progress and any existing files will be
overwritten as soon as the upload starts. If the transfer fails then the
file will be deleted. This can cause data loss of the existing file if
the transfer fails.

Note that on the local file system if you don't use --inplace hard links
(Unix only) will be broken. And if you do use --inplace you won't be
able to update in use executables.

Note also that versions of rclone prior to v1.63.0 behave as if the
--inplace flag is always supplied.

-i, --interactive

This flag can be used to tell rclone that you wish a manual confirmation
before destructive operations.

It is recommended that you use this flag while learning rclone
especially with rclone sync.

For example

    $ rclone delete --interactive /tmp/dir
    rclone: delete "important-file.txt"?
    y) Yes, this is OK (default)
    n) No, skip this
    s) Skip all delete operations with no more questions
    !) Do all delete operations with no more questions
    q) Exit rclone now.
    y/n/s/!/q> n

The options mean

-   y: Yes, this operation should go ahead. You can also press Return
    for this to happen. You'll be asked every time unless you choose s
    or !.
-   n: No, do not do this operation. You'll be asked every time unless
    you choose s or !.
-   s: Skip all the following operations of this type with no more
    questions. This takes effect until rclone exits. If there are any
    different kind of operations you'll be prompted for them.
-   !: Do all the following operations with no more questions. Useful if
    you've decided that you don't mind rclone doing that kind of
    operation. This takes effect until rclone exits . If there are any
    different kind of operations you'll be prompted for them.
-   q: Quit rclone now, just in case!

--leave-root

During rmdirs it will not remove root directory, even if it's empty.

-l, --links

Normally rclone will ignore symlinks or junction points (which behave
like symlinks under Windows). Ignored files won't be copied, moved or
deleted in a sync.

If you supply this flag then rclone will copy symbolic links from any
supported backend backend, and store them as text files, with a
.rclonelink suffix in the destination.

The text file will contain the target of the symbolic link.

The --links / -l flag enables this feature for all supported backends
and the VFS. There are individual flags for just enabling it for the VFS
--vfs-links and the local backend --local-links if required.

--list-cutoff int

When syncing rclone needs to sort directory entries before comparing
them. Below this threshold (1,000,000) by default, rclone will store the
directory entries in memory. 1,000,000 entries will take approx 1GB of
RAM to store. Above this threshold rclone will store directory entries
on disk and sort them without using a lot of memory.

Doing this is slightly less efficient then sorting them in memory and
will only work well for the bucket based backends (eg s3, b2, azureblob,
swift) but these are the only backends likely to have millions of
entries in a directory.

--log-file string

Log all of rclone's output to a file. This is not active by default.
This can be useful for tracking down problems with syncs in combination
with the -v flag. See the logging section for more info.

If the file exists, then rclone will append to it.

Note that if you are using the logrotate program to manage rclone's
logs, then you should use the copytruncate option as rclone doesn't have
a signal to rotate logs.

Alternatively you can use the options below to manage rclone's built in
log rotation.

--log-file-max-size SizeSuffix

Maximum size of the log file before it's rotated (eg 10M). This
SizeSuffix is rounded to the nearest MiB or 1 MiB if lower.

If --log-file is not set then this option will be ignored.

If this option is not set, then the other log rotation options will be
ignored.

For example if the following flags are in use

    rclone --log-file rclone.log --log-file-max-size 1M --log-file-max-backups 3

Then this will create log files which look like this

    $ ls -l
    -rw-------  1 user user  1048491 Apr 11 17:15 rclone-2025-04-11T17-15-29.998.log
    -rw-------  1 user user  1048511 Apr 11 17:15 rclone-2025-04-11T17-15-30.467.log
    -rw-------  1 user user  1048559 Apr 11 17:15 rclone-2025-04-11T17-15-30.543.log
    -rw-------  1 user user   521602 Apr 11 17:15 rclone.log

The file rclone.log being the current one.

--log-file-compress

If set, compress rotated log files using gzip. This changes the
extension of the old log files to .log.gz.

Defaults to false - don't compress log files.

--log-file-max-age Duration

Maximum duration to retain old log files (eg 7d). This is rounded to the
dearest day, or 1 day if lower.

The default is to retain all old log files.

--log-file-max-backups int

Maximum number of old log files to retain

The default is to retain all old log files.

--log-format string

Comma separated list of log format options. The accepted options are:

-   date - Add a date in the format YYYY/MM/YY to the log.
-   time - Add a time to the log in format HH:MM:SS.
-   microseconds - Add microseconds to the time in format
    HH:MM:SS.SSSSSS.
-   UTC - Make the logs in UTC not localtime.
-   longfile - Adds the source file and line number of the log
    statement.
-   shortfile - Adds the source file and line number of the log
    statement.
-   pid - Add the process ID to the log - useful with
    rclone mount --daemon.
-   nolevel - Don't add the level to the log.
-   json - Equivalent to adding --use-json-log

They are added to the log line in the order above.

The default log format is "date,time".

--log-level LogLevel

This sets the log level for rclone. The default log level is NOTICE.

DEBUG is equivalent to -vv. It outputs lots of debug info - useful for
bug reports and really finding out what rclone is doing.

INFO is equivalent to -v. It outputs information about each transfer and
prints stats once a minute by default.

NOTICE is the default log level if no logging flags are supplied. It
outputs very little when things are working normally. It outputs
warnings and significant events.

ERROR is equivalent to -q. It only outputs error messages.

See also the logging section.

--windows-event-log LogLevel

If this is configured (the default is OFF) then logs of this level and
above will be logged to the Windows event log in addition to the normal
logs. These will be logged in JSON format as described below regardless
of what format the main logs are configured for.

The Windows event log only has 3 levels of severity Info, Warning and
Error. If enabled we map rclone levels like this.

-   Error ← ERROR (and above)
-   Warning ← WARNING (note that this level is defined but not currently
    used).
-   Info ← NOTICE, INFO and DEBUG.

Rclone will declare its log source as "rclone" if it is has enough
permissions to create the registry key needed. If not then logs will
appear as "Application". You can run
rclone version --windows-event-log DEBUG once as administrator to create
the registry key in advance.

Note that the --windows-event-log level must be greater (more severe)
than or equal to the --log-level. For example to log DEBUG to a log file
but ERRORs to the event log you would use

    --log-file rclone.log --log-level DEBUG --windows-event-log ERROR

This option is only supported Windows platforms.

--use-json-log

This switches the log format to JSON. The log messages are then streamed
as individual JSON objects, with fields: level, msg, source, and time.
The resulting format is what is sometimes referred to as
newline-delimited JSON (NDJSON), or JSON Lines (JSONL). This is well
suited for processing by traditional line-oriented tools and shell
pipelines, but a complete log file is not strictly valid JSON and needs
a parser that can handle it.

The JSON logs will be printed on a single line, but are shown expanded
here for clarity.

    {
      "time": "2025-05-13T17:30:51.036237518+01:00",
      "level": "debug",
      "msg": "4 go routines active\n",
      "source": "cmd/cmd.go:298"
    }

Completed data transfer logs will have extra size information. Logs
which are about a particular object will have object and objectType
fields also.

    {
      "time": "2025-05-13T17:38:05.540846352+01:00",
      "level": "info",
      "msg": "Copied (new) to: file2.txt",
      "size": 6,
      "object": "file.txt",
      "objectType": "*local.Object",
      "source": "operations/copy.go:368"
    }

Stats logs will contain a stats field which is the same as returned from
the rc call core/stats.

    {
      "time": "2025-05-13T17:38:05.540912847+01:00",
      "level": "info",
      "msg": "...text version of the stats...",
      "stats": {
        "bytes": 6,
        "checks": 0,
        "deletedDirs": 0,
        "deletes": 0,
        "elapsedTime": 0.000904825,
        ...truncated for clarity...
        "totalBytes": 6,
        "totalChecks": 0,
        "totalTransfers": 1,
        "transferTime": 0.000882794,
        "transfers": 1
      },
      "source": "accounting/stats.go:569"
    }

--low-level-retries int

This controls the number of low level retries rclone does.

A low level retry is used to retry a failing operation - typically one
HTTP request. This might be uploading a chunk of a big file for example.
You will see low level retries in the log with the -v flag.

This shouldn't need to be changed from the default in normal operations.
However, if you get a lot of low level retries you may wish to reduce
the value so rclone moves on to a high level retry (see the --retries
flag) quicker.

Disable low level retries with --low-level-retries 1.

--max-backlog int

This is the maximum allowable backlog of files in a sync/copy/move
queued for being checked or transferred.

This can be set arbitrarily large. It will only use memory when the
queue is in use. Note that it will use in the order of N KiB of memory
when the backlog is in use.

Setting this large allows rclone to calculate how many files are pending
more accurately, give a more accurate estimated finish time and make
--order-by work more accurately.

Setting this small will make rclone more synchronous to the listings of
the remote which may be desirable.

Setting this to a negative number will make the backlog as large as
possible.

--max-buffer-memory SizeSuffix

If set, don't allocate more than given amount of memory as buffers. If
not set or set to 0 or off this will not limit the amount of memory in
use.

This includes memory used by buffers created by the --buffer flag and
buffers used by multi-thread transfers.

Most multi-thread transfers do not take additional memory, but some do
depending on the backend (eg the s3 backend for uploads). This means
there is a tension between total setting --transfers as high as possible
and memory use.

Setting --max-buffer-memory allows the buffer memory to be controlled so
that it doesn't overwhelm the machine and allows --transfers to be set
large.

--max-connections int

This sets the maximum number of concurrent calls to the backend API. It
may not map 1:1 to TCP or HTTP connections depending on the backend in
use and the use of HTTP1 vs HTTP2.

When downloading files, backends only limit the initial opening of the
stream. The bulk data download is not counted as a connection. This
means that the --max--connections flag won't limit the total number of
downloads.

Note that it is possible to cause deadlocks with this setting so it
should be used with care.

If you are doing a sync or copy then make sure --max-connections is one
more than the sum of --transfers and --checkers.

If you use --check-first then --max-connections just needs to be one
more than the maximum of --checkers and --transfers.

So for --max-connections 3 you'd use
--checkers 2 --transfers 2 --check-first or --checkers 1 --transfers 1.

Setting this flag can be useful for backends which do multipart uploads
to limit the number of simultaneous parts being transferred.

--max-delete int

This tells rclone not to delete more than N files. If that limit is
exceeded then a fatal error will be generated and rclone will stop the
operation in progress.

--max-delete-size SizeSuffix

Rclone will stop deleting files when the total size of deletions has
reached the size specified. It defaults to off.

If that limit is exceeded then a fatal error will be generated and
rclone will stop the operation in progress.

--max-depth int

This modifies the recursion depth for all the commands except purge.

So if you do rclone --max-depth 1 ls remote:path you will see only the
files in the top level directory. Using --max-depth 2 means you will see
all the files in first two directory levels and so on.

For historical reasons the lsd command defaults to using a --max-depth
of 1 - you can override this with the command line flag.

You can use this command to disable recursion (with --max-depth 1).

Note that if you use this with sync and --delete-excluded the files not
recursed through are considered excluded and will be deleted on the
destination. Test first with --dry-run if you are not sure what will
happen.

--max-duration Duration

Rclone will stop transferring when it has run for the duration
specified. Defaults to off.

When the limit is reached all transfers will stop immediately. Use
--cutoff-mode to modify this behaviour.

Rclone will exit with exit code 10 if the duration limit is reached.

--max-transfer SizeSuffix

Rclone will stop transferring when it has reached the size specified.
Defaults to off.

When the limit is reached all transfers will stop immediately. Use
--cutoff-mode to modify this behaviour.

Rclone will exit with exit code 8 if the transfer limit is reached.

--cutoff-mode HARD|SOFT|CAUTIOUS

Configure the behavior of --max-transfer and --max-duration.

HARD will stop transferring immediately when rclone reaches the limit.
This is the default.

SOFT will stop starting new transfers when rclone reaches the limit.

CAUTIOUS will try to prevent rclone from reaching the limit. Only
applicable for --max-transfer.

-M, --metadata

Setting this flag enables rclone to copy the metadata from the source to
the destination. For local backends this is ownership, permissions,
xattr etc. See the metadata section for more info.

--metadata-mapper SpaceSepList

If you supply the parameter --metadata-mapper /path/to/program then
rclone will use that program to map metadata from source object to
destination object.

The argument to this flag should be a command with an optional space
separated list of arguments. If one of the arguments has a space in then
enclose it in ", if you want a literal " in an argument then enclose the
argument in " and double the ". See CSV encoding for more info.

    --metadata-mapper "python bin/test_metadata_mapper.py"
    --metadata-mapper 'python bin/test_metadata_mapper.py "argument with a space"'
    --metadata-mapper 'python bin/test_metadata_mapper.py "argument with ""two"" quotes"'

This uses a simple JSON based protocol with input on STDIN and output on
STDOUT. This will be called for every file and directory copied and may
be called concurrently.

The program's job is to take a metadata blob on the input and turn it
into a metadata blob on the output suitable for the destination backend.

Input to the program (via STDIN) might look like this. This provides
some context for the Metadata which may be important.

-   SrcFs is the config string for the remote that the object is
    currently on.
-   SrcFsType is the name of the source backend.
-   DstFs is the config string for the remote that the object is being
    copied to
-   DstFsType is the name of the destination backend.
-   Remote is the path of the object relative to the root.
-   Size, MimeType, ModTime are attributes of the object.
-   IsDir is true if this is a directory (not yet implemented).
-   ID is the source ID of the object if known.
-   Metadata is the backend specific metadata as described in the
    backend docs.

    {
      "SrcFs": "gdrive:",
      "SrcFsType": "drive",
      "DstFs": "newdrive:user",
      "DstFsType": "onedrive",
      "Remote": "test.txt",
      "Size": 6,
      "MimeType": "text/plain; charset=utf-8",
      "ModTime": "2022-10-11T17:53:10.286745272+01:00",
      "IsDir": false,
      "ID": "xyz",
      "Metadata": {
        "btime": "2022-10-11T16:53:11Z",
        "content-type": "text/plain; charset=utf-8",
        "mtime": "2022-10-11T17:53:10.286745272+01:00",
        "owner": "user1@domain1.com",
        "permissions": "...",
        "description": "my nice file",
        "starred": "false"
      }
    }

The program should then modify the input as desired and send it to
STDOUT. The returned Metadata field will be used in its entirety for the
destination object. Any other fields will be ignored. Note in this
example we translate user names and permissions and add something to the
description:

    {
      "Metadata": {
        "btime": "2022-10-11T16:53:11Z",
        "content-type": "text/plain; charset=utf-8",
        "mtime": "2022-10-11T17:53:10.286745272+01:00",
        "owner": "user1@domain2.com",
        "permissions": "...",
        "description": "my nice file [migrated from domain1]",
        "starred": "false"
      }
    }

Metadata can be removed here too.

An example python program might look something like this to implement
the above transformations.

    import sys, json

    i = json.load(sys.stdin)
    metadata = i["Metadata"]
    # Add tag to description
    if "description" in metadata:
        metadata["description"] += " [migrated from domain1]"
    else:
        metadata["description"] = "[migrated from domain1]"
    # Modify owner
    if "owner" in metadata:
        metadata["owner"] = metadata["owner"].replace("domain1.com", "domain2.com")
    o = { "Metadata": metadata }
    json.dump(o, sys.stdout, indent="\t")

You can find this example (slightly expanded) in the rclone source code
at bin/test_metadata_mapper.py.

If you want to see the input to the metadata mapper and the output
returned from it in the log you can use -vv --dump mapper.

See the metadata section for more info.

--metadata-set stringArray

Specify value as string in format key=value to add metadata key with
value value when uploading. This can be repeated as many times as
required. See the metadata section for more info.

--modify-window Duration

When checking whether a file has been modified, this is the maximum
allowed time difference that a file can have and still be considered
equivalent.

The default is 1ns unless this is overridden by a remote. For example OS
X only stores modification times to the nearest second so if you are
reading and writing to an OS X filing system this will be 1s by default.

This command line flag allows you to override that computed default.

--multi-thread-write-buffer-size SizeSuffix

When transferring with multiple threads, rclone will buffer the
specified number of bytes in memory before writing to disk for each
thread.

This can improve performance if the underlying filesystem does not deal
well with a lot of small writes in different positions of the file, so
if you see transfers being limited by disk write speed, you might want
to experiment with different values. Specially for magnetic drives and
remote file systems a higher value can be useful.

Nevertheless, the default of 128k should be fine for almost all use
cases, so before changing it ensure that network is not really your
bottleneck.

As a final hint, size is not the only factor: block size (or similar
concept) can have an impact. In one case, we observed that exact
multiples of 16k performed much better than other values.

--multi-thread-chunk-size SizeSuffix

Normally the chunk size for multi thread transfers is set by the
backend. However some backends such as local and smb (which implement
OpenWriterAt but not OpenChunkWriter) don't have a natural chunk size.

In this case the value of this option is used (default 64Mi).

--multi-thread-cutoff SizeSuffix

When transferring files above specified size to capable backends, rclone
will use multiple threads to transfer the file (default 256M).

Capable backends are marked in the overview as MultithreadUpload. (They
need to implement either the OpenWriterAt or OpenChunkWriter internal
interfaces). These include include, local, s3, azureblob, b2,
oracleobjectstorage and smb at the time of writing.

On the local disk, rclone preallocates the file (using
fallocate(FALLOC_FL_KEEP_SIZE) on unix or NTSetInformationFile on
Windows both of which takes no time) then each thread writes directly
into the file at the correct place. This means that rclone won't create
fragmented or sparse files and there won't be any assembly time at the
end of the transfer.

The number of threads used to transfer is controlled by
--multi-thread-streams.

Use -vv if you wish to see info about the threads.

This will work with the sync, copy and move commands, and friends
copyto, moveto. Multi thread transfers will be used with rclone mount
and rclone serve if --vfs-cache-mode is set to writes or above.

Most multi-thread transfers do not take additional memory, but some do
(for example uploading to s3). In the worst case memory usage can be at
maximum --transfers * --multi-thread-chunk-size * --multi-thread-streams
or specifically for the s3 backend --transfers * --s3-chunk-size *
--s3-concurrency. However you can use the the --max-buffer-memory flag
to control the maximum memory used here.

NB that this only works with supported backends as the destination but
will work with any backend as the source.

NB that multi-thread copies are disabled for local to local copies as
they are faster without unless --multi-thread-streams is set explicitly.

NB on Windows using multi-thread transfers to the local disk will cause
the resulting files to be sparse. Use --local-no-sparse to disable
sparse files (which may cause long delays at the start of transfers) or
disable multi-thread transfers with --multi-thread-streams 0

--multi-thread-streams int

When using multi thread transfers (see above --multi-thread-cutoff) this
sets the number of streams to use. Set to 0 to disable multi thread
transfers (Default 4).

If the backend has a --backend-upload-concurrency setting (eg
--s3-upload-concurrency) then this setting will be used as the number of
transfers instead if it is larger than the value of
--multi-thread-streams or --multi-thread-streams isn't set.

--name-transform stringArray

--name-transform introduces path name transformations for rclone copy,
rclone sync, and rclone move. These transformations enable modifications
to source and destination file names by applying prefixes, suffixes, and
other alterations during transfer operations. For detailed docs and
examples, see convmv.

--no-check-dest

The --no-check-dest can be used with move or copy and it causes rclone
not to check the destination at all when copying files.

This means that:

-   the destination is not listed minimising the API calls
-   files are always transferred
-   this can cause duplicates on remotes which allow it (e.g. Google
    Drive)
-   --retries 1 is recommended otherwise you'll transfer everything
    again on a retry

This flag is useful to minimise the transactions if you know that none
of the files are on the destination.

This is a specialized flag which should be ignored by most users!

--no-gzip-encoding

Don't set Accept-Encoding: gzip. This means that rclone won't ask the
server for compressed files automatically. Useful if you've set the
server to return files with Content-Encoding: gzip but you uploaded
compressed files.

There is no need to set this in normal operation, and doing so will
decrease the network transfer efficiency of rclone.

--no-traverse

The --no-traverse flag controls whether the destination file system is
traversed when using the copy or move commands. --no-traverse is not
compatible with sync and will be ignored if you supply it with sync.

If you are only copying a small number of files (or are filtering most
of the files) and/or have a large number of files on the destination
then --no-traverse will stop rclone listing the destination and save
time.

However, if you are copying a large number of files, especially if you
are doing a copy where lots of the files under consideration haven't
changed and won't need copying then you shouldn't use --no-traverse.

See rclone copy for an example of how to use it.

--no-unicode-normalization

Don't normalize unicode characters in filenames during the sync routine.

Sometimes, an operating system will store filenames containing unicode
parts in their decomposed form (particularly macOS). Some cloud storage
systems will then recompose the unicode, resulting in duplicate files if
the data is ever copied back to a local filesystem.

Using this flag will disable that functionality, treating each unicode
character as unique. For example, by default é and é will be normalized
into the same character. With --no-unicode-normalization they will be
treated as unique characters.

--no-update-modtime

When using this flag, rclone won't update modification times of remote
files if they are incorrect as it would normally.

This can be used if the remote is being synced with another tool also
(e.g. the Google Drive client).

--no-update-dir-modtime

When using this flag, rclone won't update modification times of remote
directories if they are incorrect as it would normally.

--order-by string

The --order-by flag controls the order in which files in the backlog are
processed in rclone sync, rclone copy and rclone move.

The order by string is constructed like this. The first part describes
what aspect is being measured:

-   size - order by the size of the files
-   name - order by the full path of the files
-   modtime - order by the modification date of the files

This can have a modifier appended with a comma:

-   ascending or asc - order so that the smallest (or oldest) is
    processed first
-   descending or desc - order so that the largest (or newest) is
    processed first
-   mixed - order so that the smallest is processed first for some
    threads and the largest for others

If the modifier is mixed then it can have an optional percentage (which
defaults to 50), e.g. size,mixed,25 which means that 25% of the threads
should be taking the smallest items and 75% the largest. The threads
which take the smallest first will always take the smallest first and
likewise the largest first threads. The mixed mode can be useful to
minimise the transfer time when you are transferring a mixture of large
and small files - the large files are guaranteed upload threads and
bandwidth and the small files will be processed continuously.

If no modifier is supplied then the order is ascending.

For example

-   --order-by size,desc - send the largest files first
-   --order-by modtime,ascending - send the oldest files first
-   --order-by name - send the files with alphabetically by path first

If the --order-by flag is not supplied or it is supplied with an empty
string then the default ordering will be used which is as scanned. With
--checkers 1 this is mostly alphabetical, however with the default
--checkers 8 it is somewhat random.

Limitations

The --order-by flag does not do a separate pass over the data. This
means that it may transfer some files out of the order specified if

-   there are no files in the backlog or the source has not been fully
    scanned yet
-   there are more than --max-backlog files in the backlog

Rclone will do its best to transfer the best file it has so in practice
this should not cause a problem. Think of --order-by as being more of a
best efforts flag rather than a perfect ordering.

If you want perfect ordering then you will need to specify --check-first
which will find all the files which need transferring first before
transferring any.

--partial-suffix string

When --inplace is not used, it causes rclone to use the --partial-suffix
as suffix for temporary files.

Suffix length limit is 16 characters.

The default is .partial.

--password-command SpaceSepList

This flag supplies a program which should supply the config password
when run. This is an alternative to rclone prompting for the password or
setting the RCLONE_CONFIG_PASS variable. It is also used when setting
the config password for the first time.

The argument to this should be a command with a space separated list of
arguments. If one of the arguments has a space in then enclose it in ",
if you want a literal " in an argument then enclose the argument in "
and double the ". See CSV encoding for more info.

Eg

    --password-command "echo hello"
    --password-command 'echo "hello with space"'
    --password-command 'echo "hello with ""quotes"" and space"'

Note that when changing the configuration password the environment
variable RCLONE_PASSWORD_CHANGE=1 will be set. This can be used to
distinguish initial decryption of the config file from the new password.

See the Configuration Encryption for more info.

See a Windows PowerShell example on the Wiki.

-P, --progress

This flag makes rclone update the stats in a static block in the
terminal providing a realtime overview of the transfer.

Any log messages will scroll above the static block. Log messages will
push the static block down to the bottom of the terminal where it will
stay.

Normally this is updated every 500mS but this period can be overridden
with the --stats flag.

This can be used with the --stats-one-line flag for a simpler display.

To change the display length of filenames (for different terminal
widths), see the --stats-file-name-length option. The default output is
formatted for 80 character wide terminals.

Note: On Windows until this bug is fixed all non-ASCII characters will
be replaced with . when --progress is in use.

--progress-terminal-title

This flag, when used with -P/--progress, will print the string ETA: %s
to the terminal title.

-q, --quiet

This flag will limit rclone's output to error messages only.

--refresh-times

The --refresh-times flag can be used to update modification times of
existing files when they are out of sync on backends which don't support
hashes.

This is useful if you uploaded files with the incorrect timestamps and
you now wish to correct them.

This flag is only useful for destinations which don't support hashes
(e.g. crypt).

This can be used any of the sync commands sync, copy or move.

To use this flag you will need to be doing a modification time sync (so
not using --size-only or --checksum). The flag will have no effect when
using --size-only or --checksum.

If this flag is used when rclone comes to upload a file it will check to
see if there is an existing file on the destination. If this file
matches the source with size (and checksum if available) but has a
differing timestamp then instead of re-uploading it, rclone will update
the timestamp on the destination file. If the checksum does not match
rclone will upload the new file. If the checksum is absent (e.g. on a
crypt backend) then rclone will update the timestamp.

Note that some remotes can't set the modification time without
re-uploading the file so this flag is less useful on them.

Normally if you are doing a modification time sync rclone will update
modification times without --refresh-times provided that the remote
supports checksums and the checksums match on the file. However if the
checksums are absent then rclone will upload the file rather than
setting the timestamp as this is the safe behaviour.

--retries int

Retry the entire sync if it fails this many times it fails (default 3).

Some remotes can be unreliable and a few retries help pick up the files
which didn't get transferred because of errors.

Disable retries with --retries 1.

--retries-sleep Duration

This sets the interval between each retry specified by --retries

The default is 0. Use 0 to disable.

--server-side-across-configs

Allow server-side operations (e.g. copy or move) to work across
different configurations.

This can be useful if you wish to do a server-side copy or move between
two remotes which use the same backend but are configured differently.

Note that this isn't enabled by default because it isn't easy for rclone
to tell if it will work between any two configurations.

--size-only

Normally rclone will look at modification time and size of files to see
if they are equal. If you set this flag then rclone will check only the
size.

This can be useful transferring files from Dropbox which have been
modified by the desktop sync client which doesn't set checksums of
modification times in the same way as rclone.

--stats Duration

Commands which transfer data (sync, copy, copyto, move, moveto) will
print data transfer stats at regular intervals to show their progress.

This sets the interval.

The default is 1m. Use 0 to disable.

If you set the stats interval then all commands can show stats. This can
be useful when running other commands, check or mount for example.

Stats are logged at INFO level by default which means they won't show at
default log level NOTICE. Use --stats-log-level NOTICE or -v to make
them show. See the logging section for more info on log levels.

Note that on macOS you can send a SIGINFO (which is normally ctrl-T in
the terminal) to make the stats print immediately.

--stats-file-name-length int

By default, the --stats output will truncate file names and paths longer
than 40 characters. This is equivalent to providing
--stats-file-name-length 40. Use --stats-file-name-length 0 to disable
any truncation of file names printed by stats.

--stats-log-level LogLevel

Log level to show --stats output at. This can be DEBUG, INFO, NOTICE, or
ERROR. The default is INFO. This means at the default level of logging,
which is NOTICE, the stats won't show - if you want them to then use
--stats-log-level NOTICE. See the logging section for more details on
log levels.

--stats-one-line

When this is specified, rclone condenses the stats into a single line
showing the most important stats only.

--stats-one-line-date

When this is specified, rclone enables the single-line stats and
prepends the display with a date string. The default is
2006/01/02 15:04:05 -

--stats-one-line-date-format string

When this is specified, rclone enables the single-line stats and
prepends the display with a user-supplied date string. The date string
MUST be enclosed in quotes. Follow golang specs for date formatting
syntax.

--stats-unit string

By default, data transfer rates will be printed in bytes per second,
corresponding to --stats-unit bytes.

This option allows the data rate to be printed in bits per second, by
specifying --stats-unit bits. Data transfer volume will still be
reported in bytes.

The rate is reported as a binary unit, not SI unit. So 1 Mbit/s equals
1,048,576 bit/s and not 1,000,000 bit/s.

--suffix string

When using sync, copy or move any files which would have been
overwritten or deleted will have the suffix added to them. If there is a
file with the same path (after the suffix has been added), then it will
be overwritten.

The remote in use must support server-side move or copy and you must use
the same remote as the destination of the sync.

This is for use with files to add the suffix in the current directory or
with --backup-dir. See --backup-dir for more info.

For example

    rclone copy --interactive /path/to/local/file remote:current --suffix .bak

will copy /path/to/local to remote:current, but for any files which
would have been updated or deleted have .bak added.

If using rclone sync with --suffix and without --backup-dir then it is
recommended to put a filter rule in excluding the suffix otherwise the
sync will delete the backup files.

    rclone sync --interactive /path/to/local/file remote:current --suffix .bak --exclude "*.bak"

--suffix-keep-extension

When using --suffix, setting this causes rclone put the SUFFIX before
the extension of the files that it backs up rather than after.

So let's say we had --suffix -2019-01-01, without the flag file.txt
would be backed up to file.txt-2019-01-01 and with the flag it would be
backed up to file-2019-01-01.txt. This can be helpful to make sure the
suffixed files can still be opened.

If a file has two (or more) extensions and the second (or subsequent)
extension is recognised as a valid mime type, then the suffix will go
before that extension. So file.tar.gz would be backed up to
file-2019-01-01.tar.gz whereas file.badextension.gz would be backed up
to file.badextension-2019-01-01.gz.

--syslog

On capable OSes (not Windows or Plan9) send all log output to syslog.

This can be useful for running rclone in a script or rclone mount.

--syslog-facility string

If using --syslog this sets the syslog facility (e.g. KERN, USER). See
man syslog for a list of possible facilities. The default facility is
DAEMON.

--temp-dir string

Specify the directory rclone will use for temporary files, to override
the default. Make sure the directory exists and have accessible
permissions.

By default the operating system's temp directory will be used:

-   On Unix systems, $TMPDIR if non-empty, else /tmp.
-   On Windows, the first non-empty value from %TMP%, %TEMP%,
    %USERPROFILE%, or the Windows directory.

When overriding the default with this option, the specified path will be
set as value of environment variable TMPDIR on Unix systems and TMP and
TEMP on Windows.

You can use the config paths command to see the current value.

--tpslimit float

Limit transactions per second to this number. Default is 0 which is used
to mean unlimited transactions per second.

A transaction is roughly defined as an API call; its exact meaning will
depend on the backend. For HTTP based backends it is an HTTP
PUT/GET/POST/etc and its response. For FTP/SFTP it is a round trip
transaction over TCP.

For example, to limit rclone to 10 transactions per second use
--tpslimit 10, or to 1 transaction every 2 seconds use --tpslimit 0.5.

Use this when the number of transactions per second from rclone is
causing a problem with the cloud storage provider (e.g. getting you
banned or rate limited).

This can be very useful for rclone mount to control the behaviour of
applications using it.

This limit applies to all HTTP based backends and to the FTP and SFTP
backends. It does not apply to the local backend or the Storj backend.

See also --tpslimit-burst.

--tpslimit-burst int

Max burst of transactions for --tpslimit (default 1).

Normally --tpslimit will do exactly the number of transaction per second
specified. However if you supply --tps-burst then rclone can save up
some transactions from when it was idle giving a burst of up to the
parameter supplied.

For example if you provide --tpslimit-burst 10 then if rclone has been
idle for more than 10*--tpslimit then it can do 10 transactions very
quickly before they are limited again.

This may be used to increase performance of --tpslimit without changing
the long term average number of transactions per second.

--track-renames

By default, rclone doesn't keep track of renamed files, so if you rename
a file locally then sync it to a remote, rclone will delete the old file
on the remote and upload a new copy.

An rclone sync with --track-renames runs like a normal sync, but keeps
track of objects which exist in the destination but not in the source
(which would normally be deleted), and which objects exist in the source
but not the destination (which would normally be transferred). These
objects are then candidates for renaming.

After the sync, rclone matches up the source only and destination only
objects using the --track-renames-strategy specified and either renames
the destination object or transfers the source and deletes the
destination object. --track-renames is stateless like all of rclone's
syncs.

To use this flag the destination must support server-side copy or
server-side move, and to use a hash based --track-renames-strategy (the
default) the source and the destination must have a compatible hash.

If the destination does not support server-side copy or move, rclone
will fall back to the default behaviour and log an error level message
to the console.

Encrypted destinations are not currently supported by --track-renames if
--track-renames-strategy includes hash.

Note that --track-renames is incompatible with --no-traverse and that it
uses extra memory to keep track of all the rename candidates.

Note also that --track-renames is incompatible with --delete-before and
will select --delete-after instead of --delete-during.

--track-renames-strategy string

This option changes the file matching criteria for --track-renames.

The matching is controlled by a comma separated selection of these
tokens:

-   modtime - the modification time of the file - not supported on all
    backends
-   hash - the hash of the file contents - not supported on all backends
-   leaf - the name of the file not including its directory name
-   size - the size of the file (this is always enabled)

The default option is hash.

Using --track-renames-strategy modtime,leaf would match files based on
modification time, the leaf of the file name and the size only.

Using --track-renames-strategy modtime or leaf can enable
--track-renames support for encrypted destinations.

Note that the hash strategy is not supported with encrypted
destinations.

--delete-(before,during,after)

This option allows you to specify when files on your destination are
deleted when you sync folders.

Specifying the value --delete-before will delete all files present on
the destination, but not on the source before starting the transfer of
any new or updated files. This uses two passes through the file systems,
one for the deletions and one for the copies.

Specifying --delete-during will delete files while checking and
uploading files. This is the fastest option and uses the least memory.

Specifying --delete-after (the default value) will delay deletion of
files until all new/updated files have been successfully transferred.
The files to be deleted are collected in the copy pass then deleted
after the copy pass has completed successfully. The files to be deleted
are held in memory so this mode may use more memory. This is the safest
mode as it will only delete files if there have been no errors
subsequent to that. If there have been errors before the deletions start
then you will get the message
not deleting files as there were IO errors.

--fast-list

When doing anything which involves a directory listing (e.g. sync, copy,
ls - in fact nearly every command), rclone has different strategies to
choose from.

The basic strategy is to list one directory and processes it before
using more directory lists to process any subdirectories. This is a
mandatory backend feature, called List, which means it is supported by
all backends. This strategy uses small amount of memory, and because it
can be parallelised it is fast for operations involving processing of
the list results.

Some backends provide the support for an alternative strategy, where all
files beneath a directory can be listed in one (or a small number) of
transactions. Rclone supports this alternative strategy through an
optional backend feature called ListR. You can see in the storage system
overview documentation's optional features section which backends it is
enabled for (these tend to be the bucket-based ones, e.g. S3, B2, GCS,
Swift). This strategy requires fewer transactions for highly recursive
operations, which is important on backends where this is charged or
heavily rate limited. It may be faster (due to fewer transactions) or
slower (because it can't be parallelized) depending on different
parameters, and may require more memory if rclone has to keep the whole
listing in memory.

Which listing strategy rclone picks for a given operation is
complicated, but in general it tries to choose the best possible. It
will prefer ListR in situations where it doesn't need to store the
listed files in memory, e.g. for unlimited recursive ls command
variants. In other situations it will prefer List, e.g. for sync and
copy, where it needs to keep the listed files in memory, and is
performing operations on them where parallelization may be a huge
advantage.

Rclone is not able to take all relevant parameters into account for
deciding the best strategy, and therefore allows you to influence the
choice in two ways: You can stop rclone from using ListR by disabling
the feature, using the --disable option (--disable ListR), or you can
allow rclone to use ListR where it would normally choose not to do so
due to higher memory usage, using the --fast-list option. Rclone should
always produce identical results either way. Using --disable ListR or
--fast-list on a remote which doesn't support ListR does nothing, rclone
will just ignore it.

A rule of thumb is that if you pay for transactions and can fit your
entire sync listing into memory, then --fast-list is recommended. If you
have a very big sync to do, then don't use --fast-list, otherwise you
will run out of memory. Run some tests and compare before you decide,
and if in doubt then just leave the default, let rclone decide, i.e. not
use --fast-list.

--timeout Duration

This sets the IO idle timeout. If a transfer has started but then
becomes idle for this long it is considered broken and disconnected.

The default is 5m. Set to 0 to disable.

--transfers int

The number of file transfers to run in parallel. It can sometimes be
useful to set this to a smaller number if the remote is giving a lot of
timeouts or bigger if you have lots of bandwidth and a fast remote.

The default is to run 4 file transfers in parallel.

Look at --multi-thread-streams if you would like to control single file
transfers.

-u, --update

This forces rclone to skip any files which exist on the destination and
have a modified time that is newer than the source file.

This can be useful in avoiding needless transfers when transferring to a
remote which doesn't support modification times directly (or when using
--use-server-modtime to avoid extra API calls) as it is more accurate
than a --size-only check and faster than using --checksum. On such
remotes (or when using --use-server-modtime) the time checked will be
the uploaded time.

If an existing destination file has a modification time older than the
source file's, it will be updated if the sizes are different. If the
sizes are the same, it will be updated if the checksum is different or
not available.

If an existing destination file has a modification time equal (within
the computed modify window) to the source file's, it will be updated if
the sizes are different. The checksum will not be checked in this case
unless the --checksum flag is provided.

In all other cases the file will not be updated.

Consider using the --modify-window flag to compensate for time skews
between the source and the backend, for backends that do not support mod
times, and instead use uploaded times. However, if the backend does not
support checksums, note that syncing or copying within the time skew
window may still result in additional transfers for safety.

--use-mmap

If this flag is set then rclone will use anonymous memory allocated by
mmap on Unix based platforms and VirtualAlloc on Windows for its
transfer buffers (size controlled by --buffer-size). Memory allocated
like this does not go on the Go heap and can be returned to the OS
immediately when it is finished with.

If this flag is not set then rclone will allocate and free the buffers
using the Go memory allocator which may use more memory as memory pages
are returned less aggressively to the OS.

It is possible this does not work well on all platforms so it is
disabled by default; in the future it may be enabled by default.

--use-server-modtime

Some object-store backends (e.g, Swift, S3) do not preserve file
modification times (modtime). On these backends, rclone stores the
original modtime as additional metadata on the object. By default it
will make an API call to retrieve the metadata when the modtime is
needed by an operation.

Use this flag to disable the extra API call and rely instead on the
server's modified time. In cases such as a local to remote sync using
--update, knowing the local file is newer than the time it was last
uploaded to the remote is sufficient. In those cases, this flag can
speed up the process and reduce the number of API calls necessary.

This flag is only supported on certain backends and will be silently
ignored on unsupported backends. Supported backends include azureblob,
oracleobjectstorage, s3, swift.

Using this flag on a sync operation without also using --update would
cause all files modified at any time other than the last upload time to
be uploaded again, which is probably not what you want.

-v, -vv, --verbose

With -v rclone will tell you about each file that is transferred and a
small number of significant events.

With -vv rclone will become very verbose telling you about every file it
considers and transfers. Please send bug reports with a log with this
setting.

When setting verbosity as an environment variable, use RCLONE_VERBOSE=1
or RCLONE_VERBOSE=2 for -v and -vv respectively.

-V, --version

Prints the version number

SSL/TLS options

The outgoing SSL/TLS connections rclone makes can be controlled with
these options. For example this can be very useful with the HTTP or
WebDAV backends. Rclone HTTP servers have their own set of configuration
for SSL/TLS which you can find in their documentation.

--ca-cert stringArray

This loads the PEM encoded certificate authority certificates and uses
it to verify the certificates of the servers rclone connects to.

If you have generated certificates signed with a local CA then you will
need this flag to connect to servers using those certificates.

--client-cert string

This loads the PEM encoded client side certificate.

This is used for mutual TLS authentication.

The --client-key flag is required too when using this.

--client-key string

This loads the PEM encoded client side private key used for mutual TLS
authentication. Used in conjunction with --client-cert.

Supported types are:

-   Unencrypted PKCS#1 ("BEGIN RSA PRIVATE KEY")
-   Unencrypted PKCS#8 ("BEGIN PRIVATE KEY")
-   Encrypted PKCS#8 ("BEGIN ENCRYPTED PRIVATE KEY")
-   Legacy PEM encryption (e.g., DEK-Info headers), which are
    automatically detected.

--client-pass string

This can be used to supply an optional password to decrypt the client
key file.

NB the password should be obscured so it should be the output of
rclone obscure YOURPASSWORD.

--no-check-certificate

--no-check-certificate controls whether a client verifies the server's
certificate chain and host name. If --no-check-certificate is true, TLS
accepts any certificate presented by the server and any host name in
that certificate. In this mode, TLS is susceptible to man-in-the-middle
attacks.

This option defaults to false.

This should be used only for testing.

Configuration encryption

Your configuration file contains information for logging in to your
cloud services. This means that you should keep your rclone.conf file in
a secure location.

If you are in an environment where that isn't possible, you can add a
password to your configuration. This means that you will have to supply
the password every time you start rclone.

To add a password to your rclone configuration, execute rclone config.

    $ rclone config
    Current remotes:

    e) Edit existing remote
    n) New remote
    d) Delete remote
    s) Set configuration password
    q) Quit config
    e/n/d/s/q>

Go into s, Set configuration password:

    e/n/d/s/q> s
    Your configuration is not encrypted.
    If you add a password, you will protect your login information to cloud services.
    a) Add Password
    q) Quit to main menu
    a/q> a
    Enter NEW configuration password:
    password:
    Confirm NEW password:
    password:
    Password set
    Your configuration is encrypted.
    c) Change Password
    u) Unencrypt configuration
    q) Quit to main menu
    c/u/q>

Your configuration is now encrypted, and every time you start rclone you
will have to supply the password. See below for details. In the same
menu, you can change the password or completely remove encryption from
your configuration.

There is no way to recover the configuration if you lose your password.

You can also use

-   rclone config encryption set to set the config encryption directly
-   rclone config encryption remove to remove it
-   rclone config encryption check to check that it is encrypted
    properly.

rclone uses nacl secretbox which in turn uses XSalsa20 and Poly1305 to
encrypt and authenticate your configuration with secret-key
cryptography. The password is SHA-256 hashed, which produces the key for
secretbox. The hashed password is not stored.

While this provides very good security, we do not recommend storing your
encrypted rclone configuration in public if it contains sensitive
information, maybe except if you use a very strong password.

If it is safe in your environment, you can set the RCLONE_CONFIG_PASS
environment variable to contain your password, in which case it will be
used for decrypting the configuration.

You can set this for a session from a script. For unix like systems save
this to a file called set-rclone-password:

    #!/bin/echo Source this file don't run it

    read -s RCLONE_CONFIG_PASS
    export RCLONE_CONFIG_PASS

Then source the file when you want to use it. From the shell you would
do source set-rclone-password. It will then ask you for the password and
set it in the environment variable.

An alternate means of supplying the password is to provide a script
which will retrieve the password and print on standard output. This
script should have a fully specified path name and not rely on any
environment variables. The script is supplied either via
--password-command="..." command line argument or via the
RCLONE_PASSWORD_COMMAND environment variable.

One useful example of this is using the passwordstore application to
retrieve the password:

    export RCLONE_PASSWORD_COMMAND="pass rclone/config"

If the passwordstore password manager holds the password for the rclone
configuration, using the script method means the password is primarily
protected by the passwordstore system, and is never embedded in the
clear in scripts, nor available for examination using the standard
commands available. It is quite possible with long running rclone
sessions for copies of passwords to be innocently captured in log files
or terminal scroll buffers, etc. Using the script method of supplying
the password enhances the security of the config password considerably.

If you are running rclone inside a script, unless you are using the
--password-command method, you might want to disable password prompts.
To do that, pass the parameter --ask-password=false to rclone. This will
make rclone fail instead of asking for a password if RCLONE_CONFIG_PASS
doesn't contain a valid password, and --password-command has not been
supplied.

Whenever running commands that may be affected by options in a
configuration file, rclone will look for an existing file according to
the rules described above, and load any it finds. If an encrypted file
is found, this includes decrypting it, with the possible consequence of
a password prompt. When executing a command line that you know are not
actually using anything from such a configuration file, you can avoid it
being loaded by overriding the location, e.g. with one of the documented
special values for memory-only configuration. Since only backend options
can be stored in configuration files, this is normally unnecessary for
commands that do not operate on backends, e.g. completion. However, it
will be relevant for commands that do operate on backends in general,
but are used without referencing a stored remote, e.g. listing local
filesystem paths, or connection strings: rclone --config="" ls .

Configuration encryption cheatsheet

You can quickly apply a configuration encryption without plain-text at
rest or transfer. Detailed instructions for popular OSes:

Mac

-   Generate and store a password

        security add-generic-password -a rclone -s config -w $(openssl rand -base64 40)

-   Add the retrieval instruction to your .zprofile / .profile

        export RCLONE_PASSWORD_COMMAND="/usr/bin/security find-generic-password -a rclone -s config -w"

Linux

-   Prerequisite: Linux doesn't come with a default password manager.
    Let's install the "pass" utility using a package manager, e.g.
    apt install pass, yum install pass, etc.; then initialize a password
    store: pass init rclone.

-   Generate and store a password

        echo $(openssl rand -base64 40) | pass insert -m rclone/config

-   Add the retrieval instruction

        export RCLONE_PASSWORD_COMMAND="/usr/bin/pass rclone/config"

Windows

-   Generate and store a password

        New-Object -TypeName PSCredential -ArgumentList "rclone", (ConvertTo-SecureString -String ([System.Web.Security.Membership]::GeneratePassword(40, 10)) -AsPlainText -Force) | Export-Clixml -Path "rclone-credential.xml"

-   Add the password retrieval instruction

        [Environment]::SetEnvironmentVariable("RCLONE_PASSWORD_COMMAND", "[System.Runtime.InteropServices.Marshal]::PtrToStringAuto([System.Runtime.InteropServices.Marshal]::SecureStringToBSTR((Import-Clixml -Path "rclone-credential.xml").Password))")

Encrypt the config file (all systems)

-   Execute rclone config, and select option
    s) Set configuration password

-   Add/update the password from previous steps

Developer options

These options are useful when developing or debugging rclone. There are
also some more remote specific options which aren't documented here
which are used for testing. These start with remote name e.g.
--drive-test-option - see the docs for the remote in question.

--cpuprofile string

Write CPU profile to a file. This can be analysed with go tool pprof.

--memprofile string

Write memory profile to a file. This can be analysed with go tool pprof.

--dump DumpFlags

The --dump flag takes a comma separated list of flags to dump info
about.

Note that some headers, such as Accept-Encoding, may not be correct as
shown in the request, and the response may not show Content-Encoding if
the go standard libraries auto gzip encoding was in effect. In this case
the body of the request will be gunzipped before showing it.

The available flags are:

-   headers dumps HTTP headers. Any Authorization: headers will be
    excluded, but output may still contain sensitive information. Can be
    very verbose. Useful for debugging only. Use auth if you do want the
    Authorization: headers.
-   auth dumps HTTP headers like headers, but also includes any
    Authorization: headers. This means the output will probably contain
    sensitive information. Use headers to dump without Authorization:
    headers. Can be very verbose. Useful for debugging only.
-   bodies dumps HTTP headers and bodies. May contain sensitive info.
    Can be very verbose. Useful for debugging only. Note that the bodies
    are buffered in memory so don't use this for enormous files.
-   requests is similar to bodies, but dumps the request bodies and the
    response headers. Useful for debugging download problems.
-   responses is similar to bodies, but dumps the response bodies and
    the request headers. Useful for debugging upload problems.
-   filters dumps the filters. Useful to see exactly what include and
    exclude options are filtering on.
-   goroutines dumps a list of the running go-routines at the end of the
    command.
-   openfiles dumps a list of the open files at the end of the command.
    It uses the lsof Unix command to do that, so you'll need that
    installed to use it.
-   mapper dumps the JSON blobs being sent to the program supplied with
    --metadata-mapper and received from it. It can be useful for
    debugging the metadata mapper interface.
-   curl dumps the HTTP request as a curl command. Can be used with the
    other HTTP debugging flags (e.g. requests, bodies). By default the
    auth will be masked - use with auth to have the curl commands with
    authentication too.

Filtering

For the filtering options

-   --delete-excluded
-   --filter
-   --filter-from
-   --exclude
-   --exclude-from
-   --exclude-if-present
-   --include
-   --include-from
-   --files-from
-   --files-from-raw
-   --min-size
-   --max-size
-   --min-age
-   --max-age
-   --hash-filter
-   --dump filters
-   --metadata-include
-   --metadata-include-from
-   --metadata-exclude
-   --metadata-exclude-from
-   --metadata-filter
-   --metadata-filter-from

See the filtering section.

Remote control

For the remote control options and for instructions on how to remote
control rclone:

-   --rc
-   Anything starting with --rc-

See the remote control section.

Logging

rclone has 4 levels of logging, ERROR, NOTICE, INFO and DEBUG.

By default, rclone logs to standard error. This means you can redirect
standard error and still see the normal output of rclone commands (e.g.
rclone ls).

By default, rclone will produce Error and Notice level messages.

If you use the -q flag, rclone will only produce Error messages.

If you use the -v flag, rclone will produce Error, Notice and Info
messages.

If you use the -vv flag, rclone will produce Error, Notice, Info and
Debug messages.

You can also control the log levels with the --log-level flag.

If you use the --log-file option, rclone will redirect Error, Info and
Debug messages along with standard error to a file.

If you use the --syslog flag then rclone will log to syslog and the
--syslog-facility control which facility it uses.

Rclone prefixes all log messages with their level in capitals, e.g. INFO
which makes it easy to grep the log file for different kinds of
information.

Metrics

Rclone can publish metrics in the OpenMetrics/Prometheus format.

To enable the metrics endpoint, use the --metrics-addr flag. Metrics can
also be published on the --rc-addr port if the --rc flag and
--rc-enable-metrics flags are supplied or if using rclone rcd
--rc-enable-metrics

Rclone provides extensive configuration options for the metrics HTTP
endpoint. These settings are grouped under the Metrics section and have
a prefix --metrics-*.

When metrics are enabled with --rc-enable-metrics, they will be
published on the same port as the rc API. In this case, the --metrics-*
flags will be ignored, and the HTTP endpoint configuration will be
managed by the --rc-* parameters.

Exit code

If any errors occur during the command execution, rclone will exit with
a non-zero exit code. This allows scripts to detect when rclone
operations have failed.

During the startup phase, rclone will exit immediately if an error is
detected in the configuration. There will always be a log message
immediately before exiting.

When rclone is running it will accumulate errors as it goes along, and
only exit with a non-zero exit code if (after retries) there were still
failed transfers. For every error counted there will be a high priority
log message (visible with -q) showing the message and which file caused
the problem. A high priority message is also shown when starting a retry
so the user can see that any previous error messages may not be valid
after the retry. If rclone has done a retry it will log a high priority
message if the retry was successful.

List of exit codes

-   0 - Success
-   1 - Error not otherwise categorised
-   2 - Syntax or usage error
-   3 - Directory not found
-   4 - File not found
-   5 - Temporary error (one that more retries might fix) (Retry errors)
-   6 - Less serious errors (like 461 errors from dropbox) (NoRetry
    errors)
-   7 - Fatal error (one that more retries won't fix, like account
    suspended) (Fatal errors)
-   8 - Transfer exceeded - limit set by --max-transfer reached
-   9 - Operation successful, but no files transferred (Requires
    --error-on-no-transfer)
-   10 - Duration exceeded - limit set by --max-duration reached

Environment variables

Rclone can be configured entirely using environment variables. These can
be used to set defaults for options or config file entries.

Options

Every option in rclone can have its default set by environment variable.

To find the name of the environment variable, first, take the long
option name, strip the leading --, change - to _, make upper case and
prepend RCLONE_.

For example, to always set --stats 5s, set the environment variable
RCLONE_STATS=5s. If you set stats on the command line this will override
the environment variable setting.

Or to always use the trash in drive --drive-use-trash, set
RCLONE_DRIVE_USE_TRASH=true.

Verbosity is slightly different, the environment variable equivalent of
--verbose or -v is RCLONE_VERBOSE=1, or for -vv, RCLONE_VERBOSE=2.

The same parser is used for the options and the environment variables so
they take exactly the same form.

The options set by environment variables can be seen with the -vv flag,
e.g. rclone version -vv.

Options that can appear multiple times (type stringArray) are treated
slightly differently as environment variables can only be defined once.
In order to allow a simple mechanism for adding one or many items, the
input is treated as a CSV encoded string. For example

  ----------------------------------------------------------------------------------------
  Environment variable                                   Equivalent options
  ------------------------------------------------------ ---------------------------------
  RCLONE_EXCLUDE="*.jpg"                                 --exclude "*.jpg"

  RCLONE_EXCLUDE="*.jpg,*.png"                           --exclude "*.jpg"
                                                         --exclude "*.png"

  RCLONE_EXCLUDE='"*.jpg","*.png"'                       --exclude "*.jpg"
                                                         --exclude "*.png"

  RCLONE_EXCLUDE='"/directory with comma , in it /**"'   `--exclude "/directory with comma
                                                         , in it /**"
  ----------------------------------------------------------------------------------------

If stringArray options are defined as environment variables and options
on the command line then all the values will be used.

Config file

You can set defaults for values in the config file on an individual
remote basis. The names of the config items are documented in the page
for each backend.

To find the name of the environment variable, you need to set, take
RCLONE_CONFIG_ + name of remote + _ + name of config file option and
make it all uppercase. Note one implication here is the remote's name
must be convertible into a valid environment variable name, so it can
only contain letters, digits, or the _ (underscore) character.

For example, to configure an S3 remote named mys3: without a config file
(using unix ways of setting environment variables):

    $ export RCLONE_CONFIG_MYS3_TYPE=s3
    $ export RCLONE_CONFIG_MYS3_ACCESS_KEY_ID=XXX
    $ export RCLONE_CONFIG_MYS3_SECRET_ACCESS_KEY=XXX
    $ rclone lsd mys3:
              -1 2016-09-21 12:54:21        -1 my-bucket
    $ rclone listremotes | grep mys3
    mys3:

Note that if you want to create a remote using environment variables you
must create the ..._TYPE variable as above.

Note that the name of a remote created using environment variable is
case insensitive, in contrast to regular remotes stored in config file
as documented above. You must write the name in uppercase in the
environment variable, but as seen from example above it will be listed
and can be accessed in lowercase, while you can also refer to the same
remote in uppercase:

    $ rclone lsd mys3:
              -1 2016-09-21 12:54:21        -1 my-bucket
    $ rclone lsd MYS3:
              -1 2016-09-21 12:54:21        -1 my-bucket

Note that you can only set the options of the immediate backend, so
RCLONE_CONFIG_MYS3CRYPT_ACCESS_KEY_ID has no effect, if myS3Crypt is a
crypt remote based on an S3 remote. However RCLONE_S3_ACCESS_KEY_ID will
set the access key of all remotes using S3, including myS3Crypt.

Note also that now rclone has connection strings, it is probably easier
to use those instead which makes the above example

    rclone lsd :s3,access_key_id=XXX,secret_access_key=XXX:

Precedence

The various different methods of backend configuration are read in this
order and the first one with a value is used.

-   Parameters in connection strings, e.g. myRemote,skip_links:
-   Flag values as supplied on the command line, e.g. --skip-links
-   Remote specific environment vars, e.g.
    RCLONE_CONFIG_MYREMOTE_SKIP_LINKS (see above).
-   Backend-specific environment vars, e.g. RCLONE_LOCAL_SKIP_LINKS.
-   Backend generic environment vars, e.g. RCLONE_SKIP_LINKS.
-   Config file, e.g. skip_links = true.
-   Default values, e.g. false - these can't be changed.

So if both --skip-links is supplied on the command line and an
environment variable RCLONE_LOCAL_SKIP_LINKS is set, the command line
flag will take preference.

The backend configurations set by environment variables can be seen with
the -vv flag, e.g. rclone about myRemote: -vv.

For non backend configuration the order is as follows:

-   Flag values as supplied on the command line, e.g. --stats 5s.
-   Environment vars, e.g. RCLONE_STATS=5s.
-   Default values, e.g. 1m - these can't be changed.

Other environment variables

-   RCLONE_CONFIG_PASS set to contain your config file password (see
    Configuration Encryption section)
-   HTTP_PROXY, HTTPS_PROXY and NO_PROXY (or the lowercase versions
    thereof).
    -   HTTPS_PROXY takes precedence over HTTP_PROXY for https requests.
    -   The environment values may be either a complete URL or a
        "host[:port]" for, in which case the "http" scheme is assumed.
-   USER and LOGNAME values are used as fallbacks for current username.
    The primary method for looking up username is OS-specific: Windows
    API on Windows, real user ID in /etc/passwd on Unix systems. In the
    documentation the current username is simply referred to as $USER.
-   RCLONE_CONFIG_DIR - rclone sets this variable for use in config
    files and sub processes to point to the directory holding the config
    file.

The options set by environment variables can be seen with the -vv and
--log-level=DEBUG flags, e.g. rclone version -vv.

Configuring rclone on a remote / headless machine

Some of the configurations (those involving oauth2) require an
internet-connected web browser.

If you are trying to set rclone up on a remote or headless machine with
no browser available on it (e.g. a NAS or a server in a datacenter),
then you will need to use an alternative means of configuration. There
are three ways of doing it, described below.

Configuring using rclone authorize

On the headless machine run rclone config, but answer N to the question
Use web browser to automatically authenticate rclone with remote?.

    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.

    y) Yes (default)
    n) No
    y/n> n

    Option config_token.
    For this to work, you will need rclone available on a machine that has
    a web browser available.
    For more help and alternate methods see: https://rclone.org/remote_setup/
    Execute the following on the machine with the web browser (same rclone
    version recommended):
            rclone authorize "onedrive"
    Then paste the result.
    Enter a value.
    config_token>

Then on your main desktop machine, run rclone authorize.

    rclone authorize "onedrive"
    NOTICE: Make sure your Redirect URL is set to "http://localhost:53682/" in your custom config.
    NOTICE: If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth?state=xxxxxxxxxxxxxxxxxxxxxx
    NOTICE: Log in and authorize rclone for access
    NOTICE: Waiting for code...

    Got code
    Paste the following into your remote machine --->
    SECRET_TOKEN
    <---End paste

Then back to the headless machine, paste in the code.

    config_token> SECRET_TOKEN
    --------------------
    [acd12]
    client_id =
    client_secret =
    token = SECRET_TOKEN
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d>

Configuring by copying the config file

Rclone stores all of its configuration in a single file. This can easily
be copied to configure a remote rclone (although some backends does not
support reusing the same configuration, consult your backend
documentation to be sure).

Start by running rclone config to create the configuration file on your
desktop machine.

    rclone config

Then locate the file by running rclone config file.

    $ rclone config file
    Configuration file is stored at:
    /home/user/.rclone.conf

Finally, transfer the file to the remote machine (scp, cut paste, ftp,
sftp, etc.) and place it in the correct location (use rclone config file
on the remote machine to find out where).

Configuring using SSH Tunnel

If you have an SSH client installed on your local machine, you can set
up an SSH tunnel to redirect the port 53682 into the headless machine by
using the following command:

    ssh -L localhost:53682:localhost:53682 username@remote_server

Then on the headless machine run rclone config and answer Y to the
question
Use web browser to automatically authenticate rclone with remote?.

    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.

    y) Yes (default)
    n) No
    y/n> y
    NOTICE: Make sure your Redirect URL is set to "http://localhost:53682/" in your custom config.
    NOTICE: If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth?state=xxxxxxxxxxxxxxxxxxxxxx
    NOTICE: Log in and authorize rclone for access
    NOTICE: Waiting for code...

Finally, copy and paste the presented URL
http://127.0.0.1:53682/auth?state=xxxxxxxxxxxxxxxxxxxxxx to the browser
on your local machine, complete the auth and you are done.

Filtering, includes and excludes

Filter flags determine which files rclone sync, move, ls, lsl, md5sum,
sha1sum, size, delete, check and similar commands apply to.

They are specified in terms of path/file name patterns; path/file lists;
file age and size, or presence of a file in a directory. Bucket based
remotes without the concept of directory apply filters to object key,
age and size in an analogous way.

Rclone purge does not obey filters.

To test filters without risk of damage to data, apply them to rclone ls,
or with the --dry-run and -vv flags.

Rclone filter patterns can only be used in filter command line options,
not in the specification of a remote.

E.g. rclone copy "remote:dir*.jpg" /path/to/dir does not have a filter
effect. rclone copy remote:dir /path/to/dir --include "*.jpg" does.

Important Avoid mixing any two of --include..., --exclude... or
--filter... flags in an rclone command. The results might not be what
you expect. Instead use a --filter... flag.

Patterns for matching path/file names

Pattern syntax

Here is a formal definition of the pattern syntax, examples are below.

Rclone matching rules follow a glob style:

    *         matches any sequence of non-separator (/) characters
    **        matches any sequence of characters including / separators
    ?         matches any single non-separator (/) character
    [ [ ! ] { character-range } ]
              character class (must be non-empty)
    { pattern-list }
              pattern alternatives
    {{ regexp }}
              regular expression to match
    c         matches character c (c != *, **, ?, \, [, {, })
    \c        matches reserved character c (c = *, **, ?, \, [, {, }) or character class

character-range:

    c         matches character c (c != \, -, ])
    \c        matches reserved character c (c = \, -, ])
    lo - hi   matches character c for lo <= c <= hi

pattern-list:

    pattern { , pattern }
              comma-separated (without spaces) patterns

character classes (see Go regular expression reference) include:

    Named character classes (e.g. [\d], [^\d], [\D], [^\D])
    Perl character classes (e.g. \s, \S, \w, \W)
    ASCII character classes (e.g. [[:alnum:]], [[:alpha:]], [[:punct:]], [[:xdigit:]])

regexp for advanced users to insert a regular expression - see below for
more info:

    Any re2 regular expression not containing `}}`

If the filter pattern starts with a / then it only matches at the top
level of the directory tree, relative to the root of the remote (not
necessarily the root of the drive). If it does not start with / then it
is matched starting at the end of the path/file name but it only matches
a complete path element - it must match from a / separator or the
beginning of the path/file.

    file.jpg   - matches "file.jpg"
               - matches "directory/file.jpg"
               - doesn't match "afile.jpg"
               - doesn't match "directory/afile.jpg"
    /file.jpg  - matches "file.jpg" in the root directory of the remote
               - doesn't match "afile.jpg"
               - doesn't match "directory/file.jpg"

The top level of the remote might not be the top level of the drive.

E.g. for a Microsoft Windows local directory structure

    F:
    ├── bkp
    ├── data
    │   ├── excl
    │   │   ├── 123.jpg
    │   │   └── 456.jpg
    │   ├── incl
    │   │   └── document.pdf

To copy the contents of folder data into folder bkp excluding the
contents of subfolder exclthe following command treats F:\data and
F:\bkp as top level for filtering.

rclone copy F:\data\ F:\bkp\ --exclude=/excl/**

Important Use / in path/file name patterns and not \ even if running on
Microsoft Windows.

Simple patterns are case sensitive unless the --ignore-case flag is
used.

Without --ignore-case (default)

    potato - matches "potato"
           - doesn't match "POTATO"

With --ignore-case

    potato - matches "potato"
           - matches "POTATO"

Using regular expressions in filter patterns

The syntax of filter patterns is glob style matching (like bash uses) to
make things easy for users. However this does not provide absolute
control over the matching, so for advanced users rclone also provides a
regular expression syntax.

Rclone generally accepts Perl-style regular expressions, the exact
syntax is defined in the Go regular expression reference. Regular
expressions should be enclosed in {{ }}. They will match only the last
path segment if the glob doesn't start with / or the whole path name if
it does. Note that rclone does not attempt to parse the supplied regular
expression, meaning that using any regular expression filter will
prevent rclone from using directory filter rules, as it will instead
check every path against the supplied regular expression(s).

Here is how the {{regexp}} is transformed into an full regular
expression to match the entire path:

    {{regexp}}  becomes (^|/)(regexp)$
    /{{regexp}} becomes ^(regexp)$

Regexp syntax can be mixed with glob syntax, for example

    *.{{jpe?g}} to match file.jpg, file.jpeg but not file.png

You can also use regexp flags - to set case insensitive, for example

    *.{{(?i)jpg}} to match file.jpg, file.JPG but not file.png

Be careful with wildcards in regular expressions - you don't want them
to match path separators normally. To match any file name starting with
start and ending with end write

    {{start[^/]*end\.jpg}}

Not

    {{start.*end\.jpg}}

Which will match a directory called start with a file called end.jpg in
it as the .* will match / characters.

Note that you can use -vv --dump filters to show the filter patterns in
regexp format - rclone implements the glob patterns by transforming them
into regular expressions.

Filter pattern examples

  ---------------------------------------------------------------------------------------------
  Description         Pattern          Matches                         Does not match
  ------------------- ---------------- ------------------------------- ------------------------
  Wildcard            *.jpg            /file.jpg                       /file.png

                                       /dir/file.jpg                   /dir/file.png

  Rooted              /*.jpg           /file.jpg                       /file.png

                                       /file2.jpg                      /dir/file.jpg

  Alternates          *.{jpg,png}      /file.jpg                       /file.gif

                                       /dir/file.png                   /dir/file.gif

  Path Wildcard       dir/**           /dir/anyfile                    file.png

                                       /subdir/dir/subsubdir/anyfile   /subdir/file.png

  Any Char            *.t?t            /file.txt                       /file.qxt

                                       /dir/file.tzt                   /dir/file.png

  Range               *.[a-z]          /file.a                         /file.0

                                       /dir/file.b                     /dir/file.1

  Escape              *.\?\?\?         /file.???                       /file.abc

                                       /dir/file.???                   /dir/file.def

  Class               *.\d\d\d         /file.012                       /file.abc

                                       /dir/file.345                   /dir/file.def

  Regexp              *.{{jpe?g}}      /file.jpeg                      /file.png

                                       /dir/file.jpg                   /dir/file.jpeeg

  Rooted Regexp       /{{.*\.jpe?g}}   /file.jpeg                      /file.png

                                       /file.jpg                       /dir/file.jpg
  ---------------------------------------------------------------------------------------------

How filter rules are applied to files

Rclone path/file name filters are made up of one or more of the
following flags:

-   --include
-   --include-from
-   --exclude
-   --exclude-from
-   --filter
-   --filter-from

There can be more than one instance of individual flags.

Rclone internally uses a combined list of all the include and exclude
rules. The order in which rules are processed can influence the result
of the filter.

All flags of the same type are processed together in the order above,
regardless of what order the different types of flags are included on
the command line.

Multiple instances of the same flag are processed from left to right
according to their position in the command line.

To mix up the order of processing includes and excludes use --filter...
flags.

Within --include-from, --exclude-from and --filter-from flags rules are
processed from top to bottom of the referenced file.

If there is an --include or --include-from flag specified, rclone
implies a - ** rule which it adds to the bottom of the internal rule
list. Specifying a + rule with a --filter... flag does not imply that
rule.

Each path/file name passed through rclone is matched against the
combined filter list. At first match to a rule the path/file name is
included or excluded and no further filter rules are processed for that
path/file.

If rclone does not find a match, after testing against all rules
(including the implied rule if appropriate), the path/file name is
included.

Any path/file included at that stage is processed by the rclone command.

--files-from and --files-from-raw flags over-ride and cannot be combined
with other filter options.

To see the internal combined rule list, in regular expression form, for
a command add the --dump filters flag. Running an rclone command with
--dump filters and -vv flags lists the internal filter elements and
shows how they are applied to each source path/file. There is not
currently a means provided to pass regular expression filter options
into rclone directly though character class filter rules contain
character classes. Go regular expression reference

How filter rules are applied to directories

Rclone commands are applied to path/file names not directories. The
entire contents of a directory can be matched to a filter by the pattern
directory/* or recursively by directory/**.

Directory filter rules are defined with a closing / separator.

E.g. /directory/subdirectory/ is an rclone directory filter rule.

Rclone commands can use directory filter rules to determine whether they
recurse into subdirectories. This potentially optimises access to a
remote by avoiding listing unnecessary directories. Whether optimisation
is desirable depends on the specific filter rules and source remote
content.

If any regular expression filters are in use, then no directory
recursion optimisation is possible, as rclone must check every path
against the supplied regular expression(s).

Directory recursion optimisation occurs if either:

-   A source remote does not support the rclone ListR primitive. local,
    sftp, Microsoft OneDrive and WebDAV do not support ListR. Google
    Drive and most bucket type storage do. Full list

-   On other remotes (those that support ListR), if the rclone command
    is not naturally recursive, and provided it is not run with the
    --fast-list flag. ls, lsf -R and size are naturally recursive but
    sync, copy and move are not.

-   Whenever the --disable ListR flag is applied to an rclone command.

Rclone commands imply directory filter rules from path/file filter
rules. To view the directory filter rules rclone has implied for a
command specify the --dump filters flag.

E.g. for an include rule

    /a/*.jpg

Rclone implies the directory include rule

    /a/

Directory filter rules specified in an rclone command can limit the
scope of an rclone command but path/file filters still have to be
specified.

E.g. rclone ls remote: --include /directory/ will not match any files.
Because it is an --include option the --exclude ** rule is implied, and
the /directory/ pattern serves only to optimise access to the remote by
ignoring everything outside of that directory.

E.g. rclone ls remote: --filter-from filter-list.txt with a file
filter-list.txt:

    - /dir1/
    - /dir2/
    + *.pdf
    - **

All files in directories dir1 or dir2 or their subdirectories are
completely excluded from the listing. Only files of suffix pdf in the
root of remote: or its subdirectories are listed. The - ** rule prevents
listing of any path/files not previously matched by the rules above.

Option exclude-if-present creates a directory exclude rule based on the
presence of a file in a directory and takes precedence over other rclone
directory filter rules.

When using pattern list syntax, if a pattern item contains either / or
**, then rclone will not able to imply a directory filter rule from this
pattern list.

E.g. for an include rule

    {dir1/**,dir2/**}

Rclone will match files below directories dir1 or dir2 only, but will
not be able to use this filter to exclude a directory dir3 from being
traversed.

Directory recursion optimisation may affect performance, but normally
not the result. One exception to this is sync operations with option
--create-empty-src-dirs, where any traversed empty directories will be
created. With the pattern list example {dir1/**,dir2/**} above, this
would create an empty directory dir3 on destination (when it exists on
source). Changing the filter to {dir1,dir2}/**, or splitting it into two
include rules --include dir1/** --include dir2/**, will match the same
files while also filtering directories, with the result that an empty
directory dir3 will no longer be created.

--exclude - Exclude files matching pattern

Excludes path/file names from an rclone command based on a single
exclude rule.

This flag can be repeated. See above for the order filter flags are
processed in.

--exclude should not be used with --include, --include-from, --filter or
--filter-from flags.

--exclude has no effect when combined with --files-from or
--files-from-raw flags.

E.g. rclone ls remote: --exclude *.bak excludes all .bak files from
listing.

E.g. rclone size remote: --exclude "/dir/**" returns the total size of
all files on remote: excluding those in root directory dir and sub
directories.

E.g. on Microsoft Windows rclone ls remote: --exclude "*\[{JP,KR,HK}\]*"
lists the files in remote: without [JP] or [KR] or [HK] in their name.
Quotes prevent the shell from interpreting the \ characters.\ characters
escape the [ and ] so an rclone filter treats them literally rather than
as a character-range. The { and } define an rclone pattern list. For
other operating systems single quotes are required ie
rclone ls remote: --exclude '*\[{JP,KR,HK}\]*'

--exclude-from - Read exclude patterns from file

Excludes path/file names from an rclone command based on rules in a
named file. The file contains a list of remarks and pattern rules.

For an example exclude-file.txt:

    # a sample exclude rule file
    *.bak
    file2.jpg

rclone ls remote: --exclude-from exclude-file.txt lists the files on
remote: except those named file2.jpg or with a suffix .bak. That is
equivalent to rclone ls remote: --exclude file2.jpg --exclude "*.bak".

This flag can be repeated. See above for the order filter flags are
processed in.

The --exclude-from flag is useful where multiple exclude filter rules
are applied to an rclone command.

--exclude-from should not be used with --include, --include-from,
--filter or --filter-from flags.

--exclude-from has no effect when combined with --files-from or
--files-from-raw flags.

--exclude-from followed by - reads filter rules from standard input.

--include - Include files matching pattern

Adds a single include rule based on path/file names to an rclone
command.

This flag can be repeated. See above for the order filter flags are
processed in.

--include has no effect when combined with --files-from or
--files-from-raw flags.

--include implies --exclude ** at the end of an rclone internal filter
list. Therefore if you mix --include and --include-from flags with
--exclude, --exclude-from, --filter or --filter-from, you must use
include rules for all the files you want in the include statement. For
more flexibility use the --filter-from flag.

E.g. rclone ls remote: --include "*.{png,jpg}" lists the files on
remote: with suffix .png and .jpg. All other files are excluded.

E.g. multiple rclone copy commands can be combined with --include and a
pattern-list.

    rclone copy /vol1/A remote:A
    rclone copy /vol1/B remote:B

is equivalent to:

    rclone copy /vol1 remote: --include "{A,B}/**"

E.g. rclone ls remote:/wheat --include "??[^[:punct:]]*" lists the files
remote: directory wheat (and subdirectories) whose third character is
not punctuation. This example uses an ASCII character class.

--include-from - Read include patterns from file

Adds path/file names to an rclone command based on rules in a named
file. The file contains a list of remarks and pattern rules.

For an example include-file.txt:

    # a sample include rule file
    *.jpg
    file2.avi

rclone ls remote: --include-from include-file.txt lists the files on
remote: with name file2.avi or suffix .jpg. That is equivalent to
rclone ls remote: --include file2.avi --include "*.jpg".

This flag can be repeated. See above for the order filter flags are
processed in.

The --include-from flag is useful where multiple include filter rules
are applied to an rclone command.

--include-from implies --exclude ** at the end of an rclone internal
filter list. Therefore if you mix --include and --include-from flags
with --exclude, --exclude-from, --filter or --filter-from, you must use
include rules for all the files you want in the include statement. For
more flexibility use the --filter-from flag.

--include-from has no effect when combined with --files-from or
--files-from-raw flags.

--include-from followed by - reads filter rules from standard input.

--filter - Add a file-filtering rule

Specifies path/file names to an rclone command, based on a single
include or exclude rule, in + or - format.

This flag can be repeated. See above for the order filter flags are
processed in.

--filter + differs from --include. In the case of --include rclone
implies an --exclude * rule which it adds to the bottom of the internal
rule list. --filter...+ does not imply that rule.

--filter has no effect when combined with --files-from or
--files-from-raw flags.

--filter should not be used with --include, --include-from, --exclude or
--exclude-from flags.

E.g. rclone ls remote: --filter "- *.bak" excludes all .bak files from a
list of remote:.

--filter-from - Read filtering patterns from a file

Adds path/file names to an rclone command based on rules in a named
file. The file contains a list of remarks and pattern rules. Include
rules start with + and exclude rules with -. ! clears existing rules.
Rules are processed in the order they are defined.

This flag can be repeated. See above for the order filter flags are
processed in.

Arrange the order of filter rules with the most restrictive first and
work down.

Lines starting with # or ; are ignored, and can be used to write
comments. Inline comments are not supported. Use -vv --dump filters to
see how they appear in the final regexp.

E.g. for filter-file.txt:

    # a sample filter rule file
    - secret*.jpg
    + *.jpg
    + *.png
    + file2.avi
    - /dir/tmp/** # WARNING! This text will be treated as part of the path.
    - /dir/Trash/**
    + /dir/**
    # exclude everything else
    - *

rclone ls remote: --filter-from filter-file.txt lists the path/files on
remote: including all jpg and png files, excluding any matching
secret*.jpg and including file2.avi. It also includes everything in the
directory dir at the root of remote, except remote:dir/Trash which it
excludes. Everything else is excluded.

E.g. for an alternative filter-file.txt:

    - secret*.jpg
    + *.jpg
    + *.png
    + file2.avi
    - *

Files file1.jpg, file3.png and file2.avi are listed whilst secret17.jpg
and files without the suffix .jpg or .png are excluded.

E.g. for an alternative filter-file.txt:

    + *.jpg
    + *.gif
    !
    + 42.doc
    - *

Only file 42.doc is listed. Prior rules are cleared by the !.

--files-from - Read list of source-file names

Adds path/files to an rclone command from a list in a named file. Rclone
processes the path/file names in the order of the list, and no others.

Other filter flags (--include, --include-from, --exclude,
--exclude-from, --filter and --filter-from) are ignored when
--files-from is used.

--files-from expects a list of files as its input. Leading or trailing
whitespace is stripped from the input lines. Lines starting with # or ;
are ignored.

--files-from followed by - reads the list of files from standard input.

Rclone commands with a --files-from flag traverse the remote, treating
the names in --files-from as a set of filters.

If the --no-traverse and --files-from flags are used together an rclone
command does not traverse the remote. Instead it addresses each
path/file named in the file individually. For each path/file name, that
requires typically 1 API call. This can be efficient for a short
--files-from list and a remote containing many files.

Rclone commands do not error if any names in the --files-from file are
missing from the source remote.

The --files-from flag can be repeated in a single rclone command to read
path/file names from more than one file. The files are read from left to
right along the command line.

Paths within the --files-from file are interpreted as starting with the
root specified in the rclone command. Leading / separators are ignored.
See --files-from-raw if you need the input to be processed in a raw
manner.

E.g. for a file files-from.txt:

    # comment
    file1.jpg
    subdir/file2.jpg

rclone copy --files-from files-from.txt /home/me/pics remote:pics copies
the following, if they exist, and only those files.

    /home/me/pics/file1.jpg        → remote:pics/file1.jpg
    /home/me/pics/subdir/file2.jpg → remote:pics/subdir/file2.jpg

E.g. to copy the following files referenced by their absolute paths:

    /home/user1/42
    /home/user1/dir/ford
    /home/user2/prefect

First find a common subdirectory - in this case /home and put the
remaining files in files-from.txt with or without leading /, e.g.

    user1/42
    user1/dir/ford
    user2/prefect

Then copy these to a remote:

    rclone copy --files-from files-from.txt /home remote:backup

The three files are transferred as follows:

    /home/user1/42       → remote:backup/user1/important
    /home/user1/dir/ford → remote:backup/user1/dir/file
    /home/user2/prefect  → remote:backup/user2/stuff

Alternatively if / is chosen as root files-from.txt will be:

    /home/user1/42
    /home/user1/dir/ford
    /home/user2/prefect

The copy command will be:

    rclone copy --files-from files-from.txt / remote:backup

Then there will be an extra home directory on the remote:

    /home/user1/42       → remote:backup/home/user1/42
    /home/user1/dir/ford → remote:backup/home/user1/dir/ford
    /home/user2/prefect  → remote:backup/home/user2/prefect

--files-from-raw - Read list of source-file names without any processing

This flag is the same as --files-from except that input is read in a raw
manner. Lines with leading / trailing whitespace, and lines starting
with ; or # are read without any processing. rclone lsf has a compatible
format that can be used to export file lists from remotes for input to
--files-from-raw.

--ignore-case - make searches case insensitive

By default, rclone filter patterns are case sensitive. The --ignore-case
flag makes all of the filters patterns on the command line case
insensitive.

E.g. --include "zaphod.txt" does not match a file Zaphod.txt. With
--ignore-case a match is made.

Quoting shell metacharacters

Rclone commands with filter patterns containing shell metacharacters may
not as work as expected in your shell and may require quoting.

E.g. linux, OSX (* metacharacter)

-   --include \*.jpg
-   --include '*.jpg'
-   --include='*.jpg'

Microsoft Windows expansion is done by the command, not shell, so
--include *.jpg does not require quoting.

If the rclone error
Command .... needs .... arguments maximum: you provided .... non flag arguments:
is encountered, the cause is commonly spaces within the name of a remote
or flag value. The fix then is to quote values containing spaces.

Other filters

--min-size - Don't transfer any file smaller than this

Controls the minimum size file within the scope of an rclone command.
Default units are KiB but abbreviations B, K, M, G, T or P are valid.

E.g. rclone ls remote: --min-size 50k lists files on remote: of 50 KiB
size or larger.

See the size option docs for more info.

--max-size - Don't transfer any file larger than this

Controls the maximum size file within the scope of an rclone command.
Default units are KiB but abbreviations B, K, M, G, T or P are valid.

E.g. rclone ls remote: --max-size 1G lists files on remote: of 1 GiB
size or smaller.

See the size option docs for more info.

--max-age - Don't transfer any file older than this

Controls the maximum age of files within the scope of an rclone command.

--max-age applies only to files and not to directories.

E.g. rclone ls remote: --max-age 2d lists files on remote: of 2 days old
or less.

See the time option docs for valid formats.

--min-age - Don't transfer any file younger than this

Controls the minimum age of files within the scope of an rclone command.
(see --max-age for valid formats)

--min-age applies only to files and not to directories.

E.g. rclone ls remote: --min-age 2d lists files on remote: of 2 days old
or more.

See the time option docs for valid formats.

--hash-filter - Deterministically select a subset of files

The --hash-filter flag enables selecting a deterministic subset of
files, useful for:

1.  Running large sync operations across multiple machines.
2.  Checking a subset of files for bitrot.
3.  Any other operations where a sample of files is required.

Syntax

The flag takes two parameters expressed as a fraction:

    --hash-filter K/N

-   N: The total number of partitions (must be a positive integer).
-   K: The specific partition to select (an integer from 0 to N).

For example:

-   --hash-filter 1/3: Selects the first third of the files.
-   --hash-filter 2/3 and --hash-filter 3/3: Select the second and third
    partitions, respectively.

Each partition is non-overlapping, ensuring all files are covered
without duplication.

Random Partition Selection

Use @ as K to randomly select a partition:

    --hash-filter @/M

For example, --hash-filter @/3 will randomly select a number between 0
and 2. This will stay constant across retries.

How It Works

-   Rclone takes each file's full path, normalizes it to lowercase, and
    applies Unicode normalization.
-   It then hashes the normalized path into a 64 bit number.
-   The hash result is reduced modulo N to assign the file to a
    partition.
-   If the calculated partition does not match K the file is excluded.
-   Other filters may apply if the file is not excluded.

Important: Rclone will traverse all directories to apply the filter.

Usage Notes

-   Safe to use with rclone sync; source and destination selections will
    match.
-   Do not use with --delete-excluded, as this could delete unselected
    files.
-   Ignored if --files-from is used.

Examples

Dividing files into 4 partitions

Assuming the current directory contains file1.jpg through file9.jpg:

    $ rclone lsf --hash-filter 0/4 .
    file1.jpg
    file5.jpg

    $ rclone lsf --hash-filter 1/4 .
    file3.jpg
    file6.jpg
    file9.jpg

    $ rclone lsf --hash-filter 2/4 .
    file2.jpg
    file4.jpg

    $ rclone lsf --hash-filter 3/4 .
    file7.jpg
    file8.jpg

    $ rclone lsf --hash-filter 4/4 . # the same as --hash-filter 0/4
    file1.jpg
    file5.jpg

Syncing the first quarter of files

    rclone sync --hash-filter 1/4 source:path destination:path

Checking a random 1% of files for integrity

    rclone check --download --hash-filter @/100 source:path destination:path

Other flags

--delete-excluded - Delete files on dest excluded from sync

Important this flag is dangerous to your data - use with --dry-run and
-v first.

In conjunction with rclone sync, --delete-excluded deletes any files on
the destination which are excluded from the command.

E.g. the scope of rclone sync --interactive A: B: can be restricted:

    rclone --min-size 50k --delete-excluded sync A: B:

All files on B: which are less than 50 KiB are deleted because they are
excluded from the rclone sync command.

--dump filters - dump the filters to the output

Dumps the defined filters to standard output in regular expression
format.

Useful for debugging.

Exclude directory based on a file

The --exclude-if-present flag controls whether a directory is within the
scope of an rclone command based on the presence of a named file within
it. The flag can be repeated to check for multiple file names, presence
of any of them will exclude the directory.

This flag has a priority over other filter flags.

E.g. for the following directory structure:

    dir1/file1
    dir1/dir2/file2
    dir1/dir2/dir3/file3
    dir1/dir2/dir3/.ignore

The command rclone ls --exclude-if-present .ignore dir1 does not list
dir3, file3 or .ignore.

Metadata filters

The metadata filters work in a very similar way to the normal file name
filters, except they match metadata on the object.

The metadata should be specified as key=value patterns. This may be
wildcarded using the normal filter patterns or regular expressions.

For example if you wished to list only local files with a mode of 100664
you could do that with:

    rclone lsf -M --files-only --metadata-include "mode=100664" .

Or if you wished to show files with an atime, mtime or btime at a given
date:

    rclone lsf -M --files-only --metadata-include "[abm]time=2022-12-16*" .

Like file filtering, metadata filtering only applies to files not to
directories.

The filters can be applied using these flags.

-   --metadata-include - Include metadatas matching pattern
-   --metadata-include-from - Read metadata include patterns from file
    (use - to read from stdin)
-   --metadata-exclude - Exclude metadatas matching pattern
-   --metadata-exclude-from - Read metadata exclude patterns from file
    (use - to read from stdin)
-   --metadata-filter - Add a metadata filtering rule
-   --metadata-filter-from - Read metadata filtering patterns from a
    file (use - to read from stdin)

Each flag can be repeated. See the section on how filter rules are
applied for more details - these flags work in an identical way to the
file name filtering flags, but instead of file name patterns have
metadata patterns.

Common pitfalls

The most frequent filter support issues on the rclone forum are:

-   Not using paths relative to the root of the remote
-   Not using / to match from the root of a remote
-   Not using ** to match the contents of a directory

rclone gui

The rclone gui command starts the official Web GUI that comes bundled
with rclone.

With this command, rclone can serve a web-based GUI (graphical user
interface) that is accessible from a normal web browser.

Run it in a terminal and rclone will initialize and then start the GUI.

    rclone gui

This will produce logs like this. The terminal window needs to stay open
to continue to run the GUI:

    2026/04/14 11:36:04 NOTICE: Serving remote control on http://127.0.0.1:50803/
    2026/04/14 11:36:04 NOTICE: Serving GUI on http://127.0.0.1:50802/
    2026/04/14 11:36:04 NOTICE: GUI available at http://127.0.0.1:50802/login?pass=XXX&url=http%3A%2F%2F127.0.0.1%3A50803%2F&user=gui

You can also add debugging flags when running the GUI, such as -v, which
will show more logging output from the rc server.

Using the GUI

Once the browser opens, you will be presented with the Dashboard, the
main screen where you can see the status of your remotes and system.

At the top, starting from the left, you will see a series of tabs you
can click on. On the right side you will have the logout button and
potentially an "Update available" message if a new rclone version has
been released.

Dashboard

See live metrics, learn if your remotes are near capacity, and read the
changelog for the current version.

Explorer

Explore and manage both local disks and remotes, download files and
directories and start transfers.

Remotes

Scroll the list of remotes and tap on it to navigate to the explorer.
There you can navigate the contents of your remotes, transfer, download,
and even upload files.

Mounts

Mount remotes as local drives on your computer and check on your
existing mounts.

Serves

Get quick info about your active serve instances, and start new ones.

Settings

Edit your rclone.conf file directly, set logging flags, and performance
parameters.

How it works

When you run rclone gui this is what happens

-   Rclone starts the remote control API ("rc").
-   Rclone starts a second server to serve the Web GUI.
-   If a port, username or password is not specified, then missing
    values will be auto-generated.
-   Unless --no-open-browser is passed, a browser window will open.
-   The URL already contains the username & password, in which case the
    GUI will use those values and log you in automatically.

Security

It's important to think first about what rclone has access to and what
you might be sharing.

A few good measures:

-   Don't use --no-auth (this is for testing only).
-   Do not expose to the local network (eg with
    --api-addr :5572 --addr   :8080) unless you trust all devices on
    your local network. Prefer 127.0.0.1 or localhost (the default).
-   Use a strong password and non-obvious usernames like "admin" or
    "rclone" if you are using --user and --pass.
-   If you want to host it on a server and access it remotely, make sure
    you're only exposing the GUI and not the RC API. They listen on
    different ports.

If you want to access it remotely but want to avoid running a proxy and
exposing ports, you can use Cloudflare Tunnels or localhost.run or
Tailscale (all free).

Options

          --addr stringArray       IPaddress:Port for the GUI server (default auto-chosen localhost port)
          --api-addr stringArray   IPaddress:Port for the RC API server (default auto-chosen localhost port)
          --enable-metrics         Enable OpenMetrics/Prometheus compatible endpoint at /metrics
      -h, --help                   help for gui
          --no-auth                Don't require auth for the RC API
          --no-open-browser        Skip opening the browser automatically
          --pass string            Password for RC authentication
          --user string            User name for RC authentication

History

In v1.74 the GUI was redone and embedded within rclone for ease of use.
The GUI bundle ships as a compressed zip embedded in the rclone binary
and is served from the zip at runtime.

Remote controlling rclone with its API

If rclone is run with the --rc flag then it starts an HTTP server which
can be used to remote control rclone using its API.

You can either use the rc command to access the API or use HTTP
directly.

If you just want to run a remote control then see the rcd command.

Supported parameters

--rc

Flag to start the http server listen on remote requests.

--rc-addr=IP

IPaddress:Port or :Port to bind server to. (default "localhost:5572").

--rc-cert=KEY

SSL PEM key (concatenation of certificate and CA certificate).

--rc-client-ca=PATH

Client certificate authority to verify clients with.

--rc-htpasswd=PATH

htpasswd file - if not provided no authentication is done.

--rc-key=PATH

TLS PEM private key file.

--rc-max-header-bytes=VALUE

Maximum size of request header (default 4096).

--rc-min-tls-version=VALUE

The minimum TLS version that is acceptable. Valid values are "tls1.0",
"tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").

--rc-user=VALUE

User name for authentication.

--rc-pass=VALUE

Password for authentication.

--rc-realm=VALUE

Realm for authentication (default "rclone").

--rc-server-read-timeout=DURATION

Timeout for server reading data (default 1h0m0s).

--rc-server-write-timeout=DURATION

Timeout for server writing data (default 1h0m0s).

--rc-serve

Enable the serving of remote objects via the HTTP interface. This means
objects will be accessible at http://127.0.0.1:5572/ by default, so you
can browse to http://127.0.0.1:5572/ or http://127.0.0.1:5572/* to see a
listing of the remotes. Objects may be requested from remotes using this
syntax http://127.0.0.1:5572/[remote:path]/path/to/object

Unless the rc server has authentication configured (--rc-user/--rc-pass
or --rc-htpasswd) or the --rc-no-auth flag is set, only remotes already
present in the config file may be served this way. Inline remotes (e.g.
[:webdav,url=...:]), connection string parameters and bare local paths
are rejected, since instantiating them from an unauthenticated request
could run commands or read arbitrary local files.

Default Off.

global.* connection string options and the rc

Remotes instantiated by the rc do not let connection string global.*
options change rclone's process-wide configuration. Remotes created
directly on the command line or defined in the config file are
unaffected.

A global.* option still takes effect for the individual backend it is
set on (exactly like an override.* option), it just does not leak into
the global config for the rest of the process.

--rc-serve-no-modtime

Set this flag to skip reading the modification time (can speed things
up).

Default Off.

--rc-files /path/to/directory

Path to local files to serve on the HTTP server.

If this is set then rclone will serve the files in that directory. It
will also open the root in the web browser if specified. This is for
implementing browser based GUIs for rclone functions.

If --rc-user or --rc-pass is set then the URL that is opened will have
the authorization in the URL in the http://user:pass@localhost/ style.

Default Off.

--rc-enable-metrics

Enable OpenMetrics/Prometheus compatible endpoint at /metrics. If more
control over the metrics is desired (for example running it on a
different port or with different auth) then endpoint can be enabled with
the --metrics-* flags instead.

Default Off.

--rc-web-gui

Set this flag to serve the default web gui on the same port as rclone.

Default Off.

--rc-allow-origin

Set the allowed Access-Control-Allow-Origin for rc requests.

Can be used with --rc-web-gui if the rclone is running on different IP
than the web-gui.

Default is IP address on which rc is running.

--rc-web-fetch-url

Set the URL to fetch the rclone-web-gui files from.

Default
https://api.github.com/repos/rclone/rclone-webui-react/releases/latest.

--rc-web-gui-update

Set this flag to check and update rclone-webui-react from the
rc-web-fetch-url.

Default Off.

--rc-web-gui-force-update

Set this flag to force update rclone-webui-react from the
rc-web-fetch-url.

Default Off.

--rc-web-gui-no-open-browser

Set this flag to disable opening browser automatically when using
web-gui.

Default Off.

--rc-job-expire-duration=DURATION

Expire finished async jobs older than DURATION (default 60s).

--rc-job-expire-interval=DURATION

Interval duration to check for expired async jobs (default 10s).

--rc-no-auth

By default rclone will require authorisation to have been set up on the
rc interface in order to use any methods which access any rclone
remotes. Eg operations/list is denied as it involved creating a remote
as is sync/copy.

If this is set then no authorisation will be required on the server to
use these methods. The alternative is to use --rc-user and --rc-pass and
use these credentials in the request.

Default Off.

--rc-baseurl

Prefix for URLs.

Default is root

--rc-template

User-specified template.

Accessing the remote control via the rclone rc command

Rclone itself implements the remote control protocol in its rclone rc
command.

You can use it like this:

    $ rclone rc rc/noop param1=one param2=two
    {
        "param1": "one",
        "param2": "two"
    }

If the remote is running on a different URL than the default
http://localhost:5572/, use the --url option to specify it:

    rclone rc --url http://some.remote:1234/ rc/noop

Or, if the remote is listening on a Unix socket, use the --unix-socket
option instead:

    rclone rc --unix-socket /tmp/rclone.sock rc/noop

Run rclone rc on its own, without any commands, to see the help for the
installed remote control commands. Note that this also needs to connect
to the remote server.

JSON input

rclone rc also supports a --json flag which can be used to send more
complicated input parameters.

    $ rclone rc --json '{ "p1": [1,"2",null,4], "p2": { "a":1, "b":2 } }' rc/noop
    {
        "p1": [
            1,
            "2",
            null,
            4
        ],
        "p2": {
            "a": 1,
            "b": 2
        }
    }

If the parameter being passed is an object then it can be passed as a
JSON string rather than using the --json flag which simplifies the
command line.

    rclone rc operations/list fs=/tmp remote=test opt='{"showHash": true}'

Rather than

    rclone rc operations/list --json '{"fs": "/tmp", "remote": "test", "opt": {"showHash": true}}'

Special parameters

The rc interface supports some special parameters which apply to all
commands. These start with _ to show they are different.

Running asynchronous jobs with _async = true

Each rc call is classified as a job and it is assigned its own id. By
default jobs are executed immediately as they are created or
synchronously.

If _async has a true value when supplied to an rc call then it will
return immediately with a job id and execute id, and the task will be
run in the background. The job/status call can be used to get
information of the background job. The job can be queried for up to 1
minute after it has finished.

It is recommended that potentially long running jobs, e.g. sync/sync,
sync/copy, sync/move, operations/purge are run with the _async flag to
avoid any potential problems with the HTTP request and response timing
out.

Starting a job with the _async flag:

    $ rclone rc --json '{ "p1": [1,"2",null,4], "p2": { "a":1, "b":2 }, "_async": true }' rc/noop
    {
        "jobid": 2,
        "executeId": "d794c33c-463e-4acf-b911-f4b23e4f40b7"
    }

The jobid is a unique identifier for the job within this rclone
instance. The executeId identifies the rclone process instance and
changes after rclone restart. Together, the pair (executeId, jobid)
uniquely identifies a job across rclone restarts.

Query the status to see if the job has finished. For more information on
the meaning of these return parameters see the job/status call.

    $ rclone rc --json '{ "jobid":2 }' job/status
    {
        "duration": 0.000124163,
        "endTime": "2018-10-27T11:38:07.911245881+01:00",
        "error": "",
        "executeId": "d794c33c-463e-4acf-b911-f4b23e4f40b7",
        "finished": true,
        "id": 2,
        "output": {
            "_async": true,
            "p1": [
                1,
                "2",
                null,
                4
            ],
            "p2": {
                "a": 1,
                "b": 2
            }
        },
        "startTime": "2018-10-27T11:38:07.911121728+01:00",
        "success": true
    }

job/list can be used to show running or recently completed jobs along
with their status

    $ rclone rc job/list
    {
        "executeId": "d794c33c-463e-4acf-b911-f4b23e4f40b7",
        "finished_ids": [
            1
        ],
        "jobids": [
            1,
            2
        ],
        "running_ids": [
            2
        ]
    }

This shows: - executeId - the current rclone instance ID (same for all
jobs, changes after restart) - jobids - array of all job IDs (both
running and finished) - running_ids - array of currently running job
IDs - finished_ids - array of finished job IDs

Setting config flags with _config

If you wish to set config (the equivalent of the global flags) for the
duration of an rc call only then pass in the _config parameter.

This should be in the same format as the main key returned by
options/get.

    rclone rc --loopback options/get blocks=main

You can see more help on these options with this command (see the
options blocks section for more info).

    rclone rc --loopback options/info blocks=main

For example, if you wished to run a sync with the --checksum parameter,
you would pass this parameter in your JSON blob.

    "_config":{"CheckSum": true}

If using rclone rc this could be passed as

    rclone rc sync/sync ... _config='{"CheckSum": true}'

Any config parameters you don't set will inherit the global defaults
which were set with command line flags or environment variables.

Note that it is possible to set some values as strings or integers - see
data types for more info. Here is an example setting the equivalent of
--buffer-size in string or integer format.

    "_config":{"BufferSize": "42M"}
    "_config":{"BufferSize": 44040192}

If you wish to check the _config assignment has worked properly then
calling options/local will show what the value got set to.

Setting filter flags with _filter

If you wish to set filters for the duration of an rc call only then pass
in the _filter parameter.

This should be in the same format as the filter key returned by
options/get.

    rclone rc --loopback options/get blocks=filter

You can see more help on these options with this command (see the
options blocks section for more info).

    rclone rc --loopback options/info blocks=filter

For example, if you wished to run a sync with these flags

    --max-size 1M --max-age 42s --include "a" --include "b"

you would pass this parameter in your JSON blob.

    "_filter":{"MaxSize":"1M", "IncludeRule":["a","b"], "MaxAge":"42s"}

If using rclone rc this could be passed as

    rclone rc ... _filter='{"MaxSize":"1M", "IncludeRule":["a","b"], "MaxAge":"42s"}'

Any filter parameters you don't set will inherit the global defaults
which were set with command line flags or environment variables.

Note that it is possible to set some values as strings or integers - see
data types for more info. Here is an example setting the equivalent of
--buffer-size in string or integer format.

    "_filter":{"MinSize": "42M"}
    "_filter":{"MinSize": 44040192}

If you wish to check the _filter assignment has worked properly then
calling options/local will show what the value got set to.

Assigning operations to groups with _group = value

Each rc call has its own stats group for tracking its metrics. By
default grouping is done by the composite group name from prefix job/
and id of the job like so job/1.

If _group has a value then stats for that request will be grouped under
that value. This allows caller to group stats under their own name.

Stats for specific group can be accessed by passing group to core/stats:

    $ rclone rc --json '{ "group": "job/1" }' core/stats
    {
        "speed": 12345
        ...
    }

Data types

When the API returns types, these will mostly be straight forward
integer, string or boolean types.

However some of the types returned by the options/get call and taken by
the options/set calls as well as the vfsOpt, mountOpt and the _config
parameters.

-   Duration - these are returned as an integer duration in nanoseconds.
    They may be set as an integer, or they may be set with time string,
    eg "5s". See the options section for more info.
-   Size - these are returned as an integer number of bytes. They may be
    set as an integer or they may be set with a size suffix string, eg
    "10M". See the options section for more info.
-   Enumerated type (such as CutoffMode, DumpFlags, LogLevel,
    VfsCacheMode - these will be returned as an integer and may be set
    as an integer but more conveniently they can be set as a string, eg
    "HARD" for CutoffMode or DEBUG for LogLevel.
-   BandwidthSpec - this will be set and returned as a string, eg "1M".

Option blocks

The calls options/info (for the main config) and config/providers (for
the backend config) may be used to get information on the rclone
configuration options. This can be used to build user interfaces for
displaying and setting any rclone option.

These consist of arrays of Option blocks. These have the following
format. Each block describes a single option.

  ------------------------------------------------------------------------
  Field         Type         Optional            Description
  ------------- ------------ ------------------- -------------------------
  Name          string       N                   name of the option in
                                                 snake_case

  FieldName     string       N                   name of the field used in
                                                 the rc - if blank use
                                                 Name. May contain "." for
                                                 nested fields.

  Help          string       N                   help, started with a
                                                 single sentence on a
                                                 single line

  Groups        string       Y                   groups this option
                                                 belongs to - comma
                                                 separated string for
                                                 options classification

  Provider      string       Y                   set to filter on provider

  Default       any          N                   default value, if set
                                                 (and not to nil or "")
                                                 then Required does
                                                 nothing

  Value         any          N                   value to be set by flags

  Examples      Examples     Y                   predefined values that
                                                 can be selected from list
                                                 (multiple-choice option)

  ShortOpt      string       Y                   the short command line
                                                 option for this

  Hide          Visibility   N                   if non zero, this option
                                                 is hidden from the
                                                 configurator or the
                                                 command line

  Required      bool         N                   this option is required,
                                                 meaning value cannot be
                                                 empty unless there is a
                                                 default

  IsPassword    bool         N                   set if the option is a
                                                 password

  NoPrefix      bool         N                   set if the option for
                                                 this should not use the
                                                 backend prefix

  Advanced      bool         N                   set if this is an
                                                 advanced config option

  Exclusive     bool         N                   set if the answer can
                                                 only be one of the
                                                 examples (empty string
                                                 allowed unless Required
                                                 or Default is set)

  Sensitive     bool         N                   set if this option should
                                                 be redacted when using
                                                 rclone config redacted
  ------------------------------------------------------------------------

An example of this might be the --log-level flag. Note that the Name of
the option becomes the command line flag with _ replaced with -.

    {
        "Advanced": false,
        "Default": 5,
        "DefaultStr": "NOTICE",
        "Examples": [
            {
                "Help": "",
                "Value": "EMERGENCY"
            },
            {
                "Help": "",
                "Value": "ALERT"
            },
            ...
        ],
        "Exclusive": true,
        "FieldName": "LogLevel",
        "Groups": "Logging",
        "Help": "Log level DEBUG|INFO|NOTICE|ERROR",
        "Hide": 0,
        "IsPassword": false,
        "Name": "log_level",
        "NoPrefix": true,
        "Required": true,
        "Sensitive": false,
        "Type": "LogLevel",
        "Value": null,
        "ValueStr": "NOTICE"
    },

Note that the Help may be multiple lines separated by \n. The first line
will always be a short sentence and this is the sentence shown when
running rclone help flags.

Specifying remotes to work on

Remotes are specified with the fs=, srcFs=, dstFs= parameters depending
on the command being used.

The parameters can be a string as per the rest of rclone, eg
s3:bucket/path or :sftp:/my/dir. They can also be specified as JSON
blobs.

If specifying a JSON blob it should be a object mapping strings to
strings. These values will be used to configure the remote. There are 3
special values which may be set:

-   type - set to type to specify a remote called :type:
-   _name - set to name to specify a remote called name:
-   _root - sets the root of the remote - may be empty

One of _name or type should normally be set. If the local backend is
desired then type should be set to local. If _root isn't specified then
it defaults to the root of the remote.

For example this JSON is equivalent to remote:/tmp

    {
        "_name": "remote",
        "_root": "/tmp"
    }

And this is equivalent to :sftp,host='example.com':/tmp

    {
        "type": "sftp",
        "host": "example.com",
        "_root": "/tmp"
    }

And this is equivalent to /tmp/dir

    {
        "type": "local",
        "_root": "/tmp/dir"
    }

Supported commands

backend/command: Runs a backend command.

This takes the following parameters:

-   command - a string with the command name
-   fs - a remote name string e.g. "drive:"
-   arg - a list of arguments for the backend command
-   opt - a map of string to string of options

Returns:

-   result - result from the backend command

Example:

    rclone rc backend/command command=noop fs=. -o echo=yes -o blue -a path1 -a path2

Returns

    {
        "result": {
            "arg": [
                "path1",
                "path2"
            ],
            "name": "noop",
            "opt": {
                "blue": "",
                "echo": "yes"
            }
        }
    }

Note that this is the direct equivalent of using this "backend" command:

    rclone backend noop . -o echo=yes -o blue path1 path2

Note that arguments must be preceded by the "-a" flag

See the backend command for more information.

cache/expire: Purge a remote from cache

Purge a remote from the cache backend. Supports either a directory or a
file. Params: - remote = path to remote (required) - withData =
true/false to delete cached data (chunks) as well (optional)

Eg

    rclone rc cache/expire remote=path/to/sub/folder/
    rclone rc cache/expire remote=/ withData=true

cache/fetch: Fetch file chunks

Ensure the specified file chunks are cached on disk.

The chunks= parameter specifies the file chunks to check. It takes a
comma separated list of array slice indices. The slice indices are
similar to Python slices: start[:end]

start is the 0 based chunk number from the beginning of the file to
fetch inclusive. end is 0 based chunk number from the beginning of the
file to fetch exclusive. Both values can be negative, in which case they
count from the back of the file. The value "-5:" represents the last 5
chunks of a file.

Some valid examples are: ":5,-5:" -> the first and last five chunks
"0,-2" -> the first and the second last chunk "0:10" -> the first ten
chunks

Any parameter with a key that starts with "file" can be used to specify
files to fetch, e.g.

    rclone rc cache/fetch chunks=0 file=hello file2=home/goodbye

File names will automatically be encrypted when the a crypt remote is
used on top of the cache.

cache/stats: Get cache stats

Show statistics for the cache remote.

Authentication is not required for this call.

config/create: create the config for a remote.

This takes the following parameters:

-   name - name of remote
-   parameters - a map of { "key": "value" } pairs
-   type - type of the new remote
-   opt - a dictionary of options to control the configuration
    -   obscure - declare passwords are plain and need obscuring
    -   noObscure - declare passwords are already obscured and don't
        need obscuring
    -   noOutput - don't print anything to stdout
    -   nonInteractive - don't interact with a user, return questions
    -   continue - continue the config process with an answer
    -   all - ask all the config questions not just the post config ones
    -   state - state to restart with - used with continue
    -   result - result to restart with - used with continue

See the config create command for more information on the above.

config/delete: Delete a remote in the config file.

Parameters:

-   name - name of remote to delete

See the config delete command for more information on the above.

config/dump: Dumps the config file.

Returns a JSON object: - key: value

Where keys are remote names and values are the config parameters.

See the config dump command for more information on the above.

config/get: Get a remote in the config file.

Parameters:

-   name - name of remote to get

See the config dump command for more information on the above.

config/listremotes: Lists the remotes in the config file and defined in environment variables.

Returns - remotes - array of remote names

See the listremotes command for more information on the above.

config/password: password the config for a remote.

This takes the following parameters:

-   name - name of remote
-   parameters - a map of { "key": "value" } pairs

See the config password command for more information on the above.

config/paths: Reads the config file path and other important paths.

Returns a JSON object with the following keys:

-   config: path to config file
-   cache: path to root of cache directory
-   temp: path to root of temporary directory

Eg

    {
        "cache": "/home/USER/.cache/rclone",
        "config": "/home/USER/.rclone.conf",
        "temp": "/tmp"
    }

See the config paths command for more information on the above.

config/providers: Shows how providers are configured in the config file.

Returns a JSON object: - providers - array of objects

See the config providers command for more information on the above.

Note that the Options blocks are in the same format as returned by
"options/info". They are described in the option blocks section.

config/setpath: Set the path of the config file

Parameters:

-   path - path to the config file to use

config/unlock: Unlock the config file.

Unlocks the config file if it is locked.

Parameters:

-   'configPassword' - password to unlock the config file

A good idea is to disable AskPassword before making this call

config/update: update the config for a remote.

This takes the following parameters:

-   name - name of remote
-   parameters - a map of { "key": "value" } pairs
-   opt - a dictionary of options to control the configuration
    -   obscure - declare passwords are plain and need obscuring
    -   noObscure - declare passwords are already obscured and don't
        need obscuring
    -   noOutput - don't print anything to stdout
    -   nonInteractive - don't interact with a user, return questions
    -   continue - continue the config process with an answer
    -   all - ask all the config questions not just the post config ones
    -   state - state to restart with - used with continue
    -   result - result to restart with - used with continue

See the config update command for more information on the above.

core/bwlimit: Set the bandwidth limit.

This sets the bandwidth limit to the string passed in. This should be a
single bandwidth limit entry or a pair of upload:download bandwidth.

Eg

    rclone rc core/bwlimit rate=off
    {
        "bytesPerSecond": -1,
        "bytesPerSecondTx": -1,
        "bytesPerSecondRx": -1,
        "rate": "off"
    }
    rclone rc core/bwlimit rate=1M
    {
        "bytesPerSecond": 1048576,
        "bytesPerSecondTx": 1048576,
        "bytesPerSecondRx": 1048576,
        "rate": "1M"
    }
    rclone rc core/bwlimit rate=1M:100k
    {
        "bytesPerSecond": 1048576,
        "bytesPerSecondTx": 1048576,
        "bytesPerSecondRx": 131072,
        "rate": "1M"
    }

If the rate parameter is not supplied then the bandwidth is queried

    rclone rc core/bwlimit
    {
        "bytesPerSecond": 1048576,
        "bytesPerSecondTx": 1048576,
        "bytesPerSecondRx": 1048576,
        "rate": "1M"
    }

The format of the parameter is exactly the same as passed to --bwlimit
except only one bandwidth may be specified.

In either case "rate" is returned as a human-readable string, and
"bytesPerSecond" is returned as a number.

core/command: Run a rclone terminal command over rc.

This takes the following parameters:

-   command - a string with the command name.
-   arg - a list of arguments for the backend command.
-   opt - a map of string to string of options.
-   returnType - one of ("COMBINED_OUTPUT", "STREAM",
    "STREAM_ONLY_STDOUT", "STREAM_ONLY_STDERR").
    -   Defaults to "COMBINED_OUTPUT" if not set.
    -   The STREAM returnTypes will write the output to the body of the
        HTTP message.
    -   The COMBINED_OUTPUT will write the output to the "result"
        parameter.

Returns:

-   result - result from the backend command.
    -   Only set when using returnType "COMBINED_OUTPUT".
-   error - set if rclone exits with an error code.
-   returnType - one of ("COMBINED_OUTPUT", "STREAM",
    "STREAM_ONLY_STDOUT", "STREAM_ONLY_STDERR").

Example:

    rclone rc core/command command=ls -a mydrive:/ -o max-depth=1
    rclone rc core/command -a ls -a mydrive:/ -o max-depth=1

Returns:

    {
        "error": false,
        "result": "<Raw command line output>"
    }

    OR
    {
        "error": true,
        "result": "<Raw command line output>"
    }

core/disks: List the local disks

This does not take any parameters

This call is for rclone GUI programs to enumerate local disks and
important directories for doing transfers to and from. The list returned
will include the root directory and the user's home directory and any
mounted disks. The returned items should be usable directly as remotes.

Returns:

-   disks
    -   This is an array of strings of local disk names

core/du: Returns disk usage of a locally attached disk.

This returns the disk usage for the local directory passed in as dir.

If the directory is not passed in, it defaults to the directory pointed
to by --cache-dir.

-   dir - string (optional)

Returns:

    {
        "dir": "/",
        "info": {
            "Available": 361769115648,
            "Free": 361785892864,
            "Total": 982141468672
        }
    }

Authentication is not required for this call.

core/gc: Runs a garbage collection.

This tells the go runtime to do a garbage collection run. It isn't
necessary to call this normally, but it can be useful for debugging
memory problems.

core/group-list: Returns list of stats.

This returns list of stats groups currently in memory.

Returns the following values:

    {
        "groups":  an array of group names:
            [
                "group1",
                "group2",
                ...
            ]
    }

Authentication is not required for this call.

core/memstats: Returns the memory statistics

This returns the memory statistics of the running program. What the
values mean are explained in the go docs:
https://golang.org/pkg/runtime/#MemStats

The most interesting values for most people are:

-   HeapAlloc - this is the amount of memory rclone is actually using
-   HeapSys - this is the amount of memory rclone has obtained from the
    OS
-   Sys - this is the total amount of memory requested from the OS
    -   It is virtual memory so may include unused memory

core/obscure: Obscures a string passed in.

Pass a clear string and rclone will obscure it for the config file: -
clear - string

Returns: - obscured - string

core/pid: Return PID of current process

This returns PID of current process. Useful for stopping rclone process.

core/quit: Terminates the app.

(Optional) Pass an exit code to be used for terminating the app: -
exitCode - int

core/stats: Returns stats about current transfers.

This returns all available stats:

    rclone rc core/stats

If group is not provided then summed up stats for all groups will be
returned.

Parameters

-   group - name of the stats group (string, optional)
-   short - if true will not return the transferring and checking arrays
    (boolean, optional)

Returns the following values:

    {
        "bytes": total transferred bytes since the start of the group,
        "checks": number of files checked,
        "deletedDirs": number of directories deleted,
        "deletes" : number of files deleted,
        "elapsedTime": time in floating point seconds since rclone was started,
        "errors": number of errors,
        "eta": estimated time in seconds until the group completes,
        "fatalError": boolean whether there has been at least one fatal error,
        "lastError": last error string,
        "renames" : number of files renamed,
        "listed" : number of directory entries listed,
        "retryError": boolean showing whether there has been at least one non-NoRetryError,
            "serverSideCopies": number of server side copies done,
            "serverSideCopyBytes": number bytes server side copied,
            "serverSideMoves": number of server side moves done,
            "serverSideMoveBytes": number bytes server side moved,
        "speed": average speed in bytes per second since start of the group,
        "totalBytes": total number of bytes in the group,
        "totalChecks": total number of checks in the group,
        "totalTransfers": total number of transfers in the group,
        "transferTime" : total time spent on running jobs,
        "transfers": number of transferred files,
        "transferring": an array of currently active file transfers:
            [
                {
                    "bytes": total transferred bytes for this file,
                    "eta": estimated time in seconds until file transfer completion
                    "name": name of the file,
                    "percentage": progress of the file transfer in percent,
                    "speed": average speed over the whole transfer in bytes per second,
                    "speedAvg": current speed in bytes per second as an exponentially weighted moving average,
                    "size": size of the file in bytes
                }
            ],
        "checking": an array of names of currently active file checks
            []
    }

Values for "transferring", "checking" and "lastError" are only assigned
if data is available. The value for "eta" is null if an eta cannot be
determined.

Authentication is not required for this call.

core/stats-delete: Delete stats group.

This deletes entire stats group.

Parameters

-   group - name of the stats group (string)

core/stats-reset: Reset stats.

This clears counters, errors and finished transfers for all stats or
specific stats group if group is provided.

Parameters

-   group - name of the stats group (string)

core/transferred: Returns stats about completed transfers.

This returns stats about completed transfers:

    rclone rc core/transferred

If group is not provided then completed transfers for all groups will be
returned.

Note only the last 100 completed transfers are returned.

Parameters

-   group - name of the stats group (string)

Returns the following values:

    {
        "transferred":  an array of completed transfers (including failed ones):
            [
                {
                    "name": name of the file,
                    "size": size of the file in bytes,
                    "bytes": total transferred bytes for this file,
                    "checked": if the transfer is only checked (skipped, deleted),
                    "what": the purpose of the transfer (transferring, deleting, checking, importing, hashing, merging, listing, moving, renaming),
                    "timestamp": integer representing millisecond unix epoch,
                    "error": string description of the error (empty if successful),
                    "jobid": id of the job that this transfer belongs to
                }
            ]
    }

Authentication is not required for this call.

core/version: Shows the current version of rclone, Go and the OS.

This shows the current versions of rclone, Go and the OS:

-   version - rclone version, e.g. "v1.71.2"
-   decomposed - version number as [major, minor, patch]
-   isGit - boolean - true if this was compiled from the git version
-   isBeta - boolean - true if this is a beta version
-   os - OS in use as according to Go GOOS (e.g. "linux")
-   osKernel - OS Kernel version (e.g. "6.8.0-86-generic (x86_64)")
-   osVersion - OS Version (e.g. "ubuntu 24.04 (64 bit)")
-   osArch - cpu architecture in use (e.g. "arm64 (ARMv8 compatible)")
-   arch - cpu architecture in use according to Go GOARCH (e.g. "arm64")
-   goVersion - version of Go runtime in use (e.g. "go1.25.0")
-   linking - type of rclone executable (static or dynamic)
-   goTags - space separated build tags or "none"

Authentication is not required for this call.

debug/set-block-profile-rate: Set runtime.SetBlockProfileRate for blocking profiling.

SetBlockProfileRate controls the fraction of goroutine blocking events
that are reported in the blocking profile. The profiler aims to sample
an average of one blocking event per rate nanoseconds spent blocked.

To include every blocking event in the profile, pass rate = 1. To turn
off profiling entirely, pass rate <= 0.

After calling this you can use this to see the blocking profile:

    go tool pprof http://localhost:5572/debug/pprof/block

Parameters:

-   rate - int

debug/set-gc-percent: Call runtime/debug.SetGCPercent for setting the garbage collection target percentage.

SetGCPercent sets the garbage collection target percentage: a collection
is triggered when the ratio of freshly allocated data to live data
remaining after the previous collection reaches this percentage.
SetGCPercent returns the previous setting. The initial setting is the
value of the GOGC environment variable at startup, or 100 if the
variable is not set.

This setting may be effectively reduced in order to maintain a memory
limit. A negative percentage effectively disables garbage collection,
unless the memory limit is reached.

See https://pkg.go.dev/runtime/debug#SetMemoryLimit for more details.

Parameters:

-   gc-percent - int

debug/set-mutex-profile-fraction: Set runtime.SetMutexProfileFraction for mutex profiling.

SetMutexProfileFraction controls the fraction of mutex contention events
that are reported in the mutex profile. On average 1/rate events are
reported. The previous rate is returned.

To turn off profiling entirely, pass rate 0. To just read the current
rate, pass rate < 0. (For n>1 the details of sampling may change.)

Once this is set you can look use this to profile the mutex contention:

    go tool pprof http://localhost:5572/debug/pprof/mutex

Parameters:

-   rate - int

Results:

-   previousRate - int

debug/set-soft-memory-limit: Call runtime/debug.SetMemoryLimit for setting a soft memory limit for the runtime.

SetMemoryLimit provides the runtime with a soft memory limit.

The runtime undertakes several processes to try to respect this memory
limit, including adjustments to the frequency of garbage collections and
returning memory to the underlying system more aggressively. This limit
will be respected even if GOGC=off (or, if SetGCPercent(-1) is
executed).

The input limit is provided as bytes, and includes all memory mapped,
managed, and not released by the Go runtime. Notably, it does not
account for space used by the Go binary and memory external to Go, such
as memory managed by the underlying system on behalf of the process, or
memory managed by non-Go code inside the same process. Examples of
excluded memory sources include: OS kernel memory held on behalf of the
process, memory allocated by C code, and memory mapped by syscall.Mmap
(because it is not managed by the Go runtime).

A zero limit or a limit that's lower than the amount of memory used by
the Go runtime may cause the garbage collector to run nearly
continuously. However, the application may still make progress.

The memory limit is always respected by the Go runtime, so to
effectively disable this behavior, set the limit very high.
math.MaxInt64 is the canonical value for disabling the limit, but values
much greater than the available memory on the underlying system work
just as well.

See https://go.dev/doc/gc-guide for a detailed guide explaining the soft
memory limit in more detail, as well as a variety of common use-cases
and scenarios.

SetMemoryLimit returns the previously set memory limit. A negative input
does not adjust the limit, and allows for retrieval of the currently set
memory limit.

Parameters:

-   mem-limit - int

fscache/clear: Clear the Fs cache.

This clears the fs cache. This is where remotes created from backends
are cached for a short while to make repeated rc calls more efficient.

If you change the parameters of a backend then you may want to call this
to clear an existing remote out of the cache before re-creating it.

fscache/entries: Returns the number of entries in the fs cache.

This returns the number of entries in the fs cache.

Returns - entries - number of items in the cache

job/batch: Run a batch of rclone rc commands concurrently.

This takes the following parameters:

-   concurrency - int - do this many commands concurrently. Defaults to
    --transfers if not set.
-   inputs - an list of inputs to the commands with an extra _path
    parameter

    {
        "_path": "rc/path",
        "param1": "parameter for the path as documented",
        "param2": "parameter for the path as documented, etc",
    }

The inputs may use _async, _group, _config and _filter as normal when
using the rc.

Returns:

-   results - a list of results from the commands with one entry for
    each in inputs.

For example:

    rclone rc job/batch --json '{
      "inputs": [
        {
          "_path": "rc/noop",
          "parameter": "OK"
        },
        {
          "_path": "rc/error",
          "parameter": "BAD"
        }
      ]
    }
    '

Gives the result:

    {
      "results": [
        {
          "parameter": "OK"
        },
        {
          "error": "arbitrary error on input map[parameter:BAD]",
          "input": {
            "parameter": "BAD"
          },
          "path": "rc/error",
          "status": 500
        }
      ]
    }

job/list: Lists the IDs of the running jobs

Parameters: None.

Results:

-   executeId - string id of rclone executing (change after restart)
-   jobids - array of integer job ids (starting at 1 on each restart)
-   runningIds - array of integer job ids that are running
-   finishedIds - array of integer job ids that are finished

Authentication is not required for this call.

job/status: Reads the status of the job ID

Parameters:

-   jobid - id of the job (integer).

Results:

-   finished - boolean
-   duration - time in seconds that the job ran for
-   endTime - time the job finished (e.g.
    "2018-10-26T18:50:20.528746884+01:00")
-   error - error from the job or empty string for no error
-   finished - boolean whether the job has finished or not
-   id - as passed in above
-   executeId - rclone instance ID (changes after restart); combined
    with id uniquely identifies a job
-   startTime - time the job started (e.g.
    "2018-10-26T18:50:20.528336039+01:00")
-   success - boolean - true for success false otherwise
-   output - output of the job as would have been returned if called
    synchronously
-   progress - output of the progress related to the underlying job

Authentication is not required for this call.

job/stop: Stop the running job

Parameters:

-   jobid - id of the job (integer).

job/stopgroup: Stop all running jobs in a group

Parameters:

-   group - name of the group (string).

mount/listmounts: Show current mount points

This shows currently mounted points, which can be used for performing an
unmount.

This takes no parameters and returns

-   mountPoints: list of current mount points

Eg

    rclone rc mount/listmounts

mount/mount: Create a new mount point

rclone allows Linux, FreeBSD, macOS and Windows to mount any of Rclone's
cloud storage systems as a file system with FUSE.

If no mountType is provided, the priority is given as follows: 1. mount
2.cmount 3.mount2

This takes the following parameters:

-   fs - a remote path to be mounted (required)
-   mountPoint: valid path on the local machine (required)
-   mountType: one of the values (mount, cmount, mount2) specifies the
    mount implementation to use
-   mountOpt: a JSON object with Mount options in.
-   vfsOpt: a JSON object with VFS options in.

On Windows mountPoint may be set to "*" to assign the next available
drive letter automatically, or a network share UNC path (e.g. "\server")
to mount as a network drive. In these cases the actual drive letter is
chosen at mount time.

This returns the following values:

-   mountPoint: the actual mount point that was used (this may differ
    from the input, e.g. on Windows when "*" is passed the allocated
    drive letter is returned)

Example:

    rclone rc mount/mount fs=mydrive: mountPoint=/home/<user>/mountPoint
    rclone rc mount/mount fs=mydrive: mountPoint=/home/<user>/mountPoint mountType=mount
    rclone rc mount/mount fs=TestDrive: mountPoint=/mnt/tmp vfsOpt='{"CacheMode": 2}' mountOpt='{"AllowOther": true}'
    rclone rc mount/mount fs=mydrive: mountPoint=* mountType=cmount

The vfsOpt are as described in options/get and can be seen in the "vfs"
section when running and the mountOpt can be seen in the "mount"
section:

    rclone rc options/get

mount/types: Show all possible mount types

This shows all possible mount types and returns them as a list.

This takes no parameters and returns

-   mountTypes: list of mount types

The mount types are strings like "mount", "mount2", "cmount" and can be
passed to mount/mount as the mountType parameter.

Eg

    rclone rc mount/types

mount/unmount: Unmount selected active mount

rclone allows Linux, FreeBSD, macOS and Windows to mount any of Rclone's
cloud storage systems as a file system with FUSE.

This takes the following parameters:

-   mountPoint: valid path on the local machine where the mount was
    created (required)

Example:

    rclone rc mount/unmount mountPoint=/home/<user>/mountPoint

mount/unmountall: Unmount all active mounts

rclone allows Linux, FreeBSD, macOS and Windows to mount any of Rclone's
cloud storage systems as a file system with FUSE.

This takes no parameters and returns error if unmount does not succeed.

Eg

    rclone rc mount/unmountall

operations/about: Return the space used on the remote

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"

The result is as returned from rclone about --json

See the about command for more information on the above.

operations/check: check the source and destination are the same

Checks the files in the source and destination match. It compares sizes
and hashes and logs a report of files that don't match. It doesn't alter
the source or destination.

This takes the following parameters:

-   srcFs - a remote name string e.g. "drive:" for the source, "/" for
    local filesystem
-   dstFs - a remote name string e.g. "drive2:" for the destination, "/"
    for local filesystem
-   download - check by downloading rather than with hash
-   checkFileHash - treat checkFileFs:checkFileRemote as a SUM file with
    hashes of given type
-   checkFileFs - treat checkFileFs:checkFileRemote as a SUM file with
    hashes of given type
-   checkFileRemote - treat checkFileFs:checkFileRemote as a SUM file
    with hashes of given type
-   oneWay - check one way only, source files must exist on remote
-   combined - make a combined report of changes (default false)
-   missingOnSrc - report all files missing from the source (default
    true)
-   missingOnDst - report all files missing from the destination
    (default true)
-   match - report all matching files (default false)
-   differ - report all non-matching files (default true)
-   error - report all files with errors (hashing or reading) (default
    true)

If you supply the download flag, it will download the data from both
remotes and check them against each other on the fly. This can be useful
for remotes that don't support hashes or if you really want to check all
the data.

If you supply the size-only global flag, it will only compare the sizes
not the hashes as well. Use this for a quick check.

If you supply the checkFileHash option with a valid hash name, the
checkFileFs:checkFileRemote must point to a text file in the SUM format.
This treats the checksum file as the source and dstFs as the
destination. Note that srcFs is not used and should not be supplied in
this case.

Returns:

-   success - true if no error, false otherwise
-   status - textual summary of check, OK or text string
-   hashType - hash used in check, may be missing
-   combined - array of strings of combined report of changes
-   missingOnSrc - array of strings of all files missing from the source
-   missingOnDst - array of strings of all files missing from the
    destination
-   match - array of strings of all matching files
-   differ - array of strings of all non-matching files
-   error - array of strings of all files with errors (hashing or
    reading)

operations/cleanup: Remove trashed files in the remote or path

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"

See the cleanup command for more information on the above.

operations/copyfile: Copy a file from source remote to destination remote

This takes the following parameters:

-   srcFs - a remote name string e.g. "drive:" for the source, "/" for
    local filesystem
-   srcRemote - a path within that remote e.g. "file.txt" for the source
-   dstFs - a remote name string e.g. "drive2:" for the destination, "/"
    for local filesystem
-   dstRemote - a path within that remote e.g. "file2.txt" for the
    destination

operations/copyurl: Copy the URL to the object

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"
-   url - string, URL to read from
-   autoFilename - boolean, set to true to retrieve destination file
    name from url

See the copyurl command for more information on the above.

operations/delete: Remove files in the path

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"

See the delete command for more information on the above.

operations/deletefile: Remove the single file pointed to

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"

See the deletefile command for more information on the above.

operations/fsinfo: Return information about the remote

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"

This returns info about the remote passed in;

    {
            // optional features and whether they are available or not
            "Features": {
                    "About": true,
                    "BucketBased": false,
                    "BucketBasedRootOK": false,
                    "CanHaveEmptyDirectories": true,
                    "CaseInsensitive": false,
                    "ChangeNotify": false,
                    "CleanUp": false,
                    "Command": true,
                    "Copy": false,
                    "DirCacheFlush": false,
                    "DirMove": true,
                    "Disconnect": false,
                    "DuplicateFiles": false,
                    "GetTier": false,
                    "IsLocal": true,
                    "ListR": false,
                    "MergeDirs": false,
                    "MetadataInfo": true,
                    "Move": true,
                    "OpenWriterAt": true,
                    "PublicLink": false,
                    "Purge": true,
                    "PutStream": true,
                    "PutUnchecked": false,
                    "ReadMetadata": true,
                    "ReadMimeType": false,
                    "ServerSideAcrossConfigs": false,
                    "SetTier": false,
                    "SetWrapper": false,
                    "Shutdown": false,
                    "SlowHash": true,
                    "SlowModTime": false,
                    "UnWrap": false,
                    "UserInfo": false,
                    "UserMetadata": true,
                    "WrapFs": false,
                    "WriteMetadata": true,
                    "WriteMimeType": false
            },
            // Names of hashes available
            "Hashes": [
                    "md5",
                    "sha1",
                    "whirlpool",
                    "crc32",
                    "sha256",
                    "dropbox",
                    "mailru",
                    "quickxor"
            ],
            "Name": "local",        // Name as created
            "Precision": 1,         // Precision of timestamps in ns
            "Root": "/",            // Path as created
            "String": "Local file system at /", // how the remote will appear in logs
            // Information about the system metadata for this backend
            "MetadataInfo": {
                    "System": {
                            "atime": {
                                    "Help": "Time of last access",
                                    "Type": "RFC 3339",
                                    "Example": "2006-01-02T15:04:05.999999999Z07:00"
                            },
                            "btime": {
                                    "Help": "Time of file birth (creation)",
                                    "Type": "RFC 3339",
                                    "Example": "2006-01-02T15:04:05.999999999Z07:00"
                            },
                            "gid": {
                                    "Help": "Group ID of owner",
                                    "Type": "decimal number",
                                    "Example": "500"
                            },
                            "mode": {
                                    "Help": "File type and mode",
                                    "Type": "octal, unix style",
                                    "Example": "0100664"
                            },
                            "mtime": {
                                    "Help": "Time of last modification",
                                    "Type": "RFC 3339",
                                    "Example": "2006-01-02T15:04:05.999999999Z07:00"
                            },
                            "rdev": {
                                    "Help": "Device ID (if special file)",
                                    "Type": "hexadecimal",
                                    "Example": "1abc"
                            },
                            "uid": {
                                    "Help": "User ID of owner",
                                    "Type": "decimal number",
                                    "Example": "500"
                            }
                    },
                    "Help": "Textual help string\n"
            }
    }

This command does not have a command line equivalent so use this
instead:

    rclone rc --loopback operations/fsinfo fs=remote:

operations/hashsum: Produces a hashsum file for all the objects in the path.

Produces a hash file for all the objects in the path using the hash
named. The output is in the same format as the standard md5sum/sha1sum
tool.

This takes the following parameters:

-   fs - a remote name string e.g. "drive:" for the source, "/" for
    local filesystem
    -   this can point to a file and just that file will be returned in
        the listing.
-   hashType - type of hash to be used
-   download - check by downloading rather than with hash (boolean)
-   base64 - output the hashes in base64 rather than hex (boolean)

If you supply the download flag, it will download the data from the
remote and create the hash on the fly. This can be useful for remotes
that don't support the given hash or if you really want to check all the
data.

Note that if you wish to supply a checkfile to check hashes against the
current files then you should use operations/check instead of
operations/hashsum.

Returns:

-   hashsum - array of strings of the hashes
-   hashType - type of hash used

Example:

    $ rclone rc --loopback operations/hashsum fs=bin hashType=MD5 download=true base64=true
    {
        "hashType": "md5",
        "hashsum": [
            "WTSVLpuiXyJO_kGzJerRLg==  backend-versions.sh",
            "v1b_OlWCJO9LtNq3EIKkNQ==  bisect-go-rclone.sh",
            "VHbmHzHh4taXzgag8BAIKQ==  bisect-rclone.sh",
        ]
    }

See the hashsum command for more information on the above.

operations/hashsumfile: Produces a hash for a single file.

Produces a hash for a single file using the hash named.

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "file.txt"
-   hashType - type of hash to be used
-   download - check by downloading rather than with hash (boolean)
-   base64 - output the hashes in base64 rather than hex (boolean)

If you supply the download flag, it will download the data from the
remote and create the hash on the fly. This can be useful for remotes
that don't support the given hash or if you really want to read all the
data.

Returns:

-   hash - hash for the file
-   hashType - type of hash used

Example:

    $ rclone rc --loopback operations/hashsumfile fs=/ remote=/bin/bash hashType=MD5 download=true base64=true
    {
        "hashType": "md5",
        "hash": "MDMw-fG2YXs7Uz5Nz-H68A=="
    }

See the hashsum command for more information on the above.

operations/list: List the given remote and path in JSON format

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"
-   opt - a dictionary of options to control the listing (optional)
    -   recurse - If set recurse directories
    -   noModTime - If set return modification time
    -   showEncrypted - If set show decrypted names
    -   showOrigIDs - If set show the IDs for each item if known
    -   showHash - If set return a dictionary of hashes
    -   noMimeType - If set don't show mime types
    -   dirsOnly - If set only show directories
    -   filesOnly - If set only show files
    -   metadata - If set return metadata of objects also
    -   hashTypes - array of strings of hash types to show if showHash
        set

Returns:

-   list
    -   This is an array of objects as described in the lsjson command

See the lsjson command for more information on the above and examples.

operations/mkdir: Make a destination directory or container

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"

See the mkdir command for more information on the above.

operations/movefile: Move a file from source remote to destination remote

This takes the following parameters:

-   srcFs - a remote name string e.g. "drive:" for the source, "/" for
    local filesystem
-   srcRemote - a path within that remote e.g. "file.txt" for the source
-   dstFs - a remote name string e.g. "drive2:" for the destination, "/"
    for local filesystem
-   dstRemote - a path within that remote e.g. "file2.txt" for the
    destination

operations/publiclink: Create or retrieve a public link to the given file or folder.

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"
-   unlink - boolean - if set removes the link rather than adding it
    (optional)
-   expire - string - the expiry time of the link e.g. "1d" (optional)

Returns:

-   url - URL of the resource

See the link command for more information on the above.

operations/purge: Remove a directory or container and all of its contents

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"

See the purge command for more information on the above.

operations/rmdir: Remove an empty directory or container

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"

See the rmdir command for more information on the above.

operations/rmdirs: Remove all the empty directories in the path

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"
-   leaveRoot - boolean, set to true not to delete the root

See the rmdirs command for more information on the above.

operations/settier: Changes storage tier or class on all files in the path

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"

See the settier command for more information on the above.

operations/settierfile: Changes storage tier or class on the single file pointed to

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"

operations/size: Count the number of bytes and files in remote

This takes the following parameters:

-   fs - a remote name string e.g. "drive:path/to/dir"

Returns:

-   count - number of files
-   bytes - number of bytes in those files

See the size command for more information on the above.

operations/stat: Give information about the supplied file or directory

This takes the following parameters

-   fs - a remote name string eg "drive:"
-   remote - a path within that remote eg "dir"
-   opt - a dictionary of options to control the listing (optional)
    -   see operations/list for the options

The result is

-   item - an object as described in the lsjson command. Will be null if
    not found.

Note that if you are only interested in files then it is much more
efficient to set the filesOnly flag in the options.

See the lsjson command for more information on the above and examples.

operations/uploadfile: Upload file using multiform/form-data

This takes the following parameters:

-   fs - a remote name string e.g. "drive:"
-   remote - a path within that remote e.g. "dir"
-   each part in body represents a file to be uploaded

options/blocks: List all the option blocks

Returns: - options - a list of the options block names

options/get: Get all the global options

Returns an object where keys are option block names and values are an
object with the current option values in.

Parameters:

-   blocks: optional string of comma separated blocks to include
    -   all are included if this is missing or ""

Note that these are the global options which are unaffected by use of
the _config and _filter parameters. If you wish to read the parameters
set in _config or _filter use options/local.

This shows the internal names of the option within rclone which should
map to the external options very easily with a few exceptions.

options/info: Get info about all the global options

Returns an object where keys are option block names and values are an
array of objects with info about each options.

Parameters:

-   blocks: optional string of comma separated blocks to include
    -   all are included if this is missing or ""

These objects are in the same format as returned by "config/providers".
They are described in the option blocks section.

options/local: Get the currently active config for this call

Returns an object with the keys "config" and "filter". The "config" key
contains the local config and the "filter" key contains the local
filters.

Note that these are the local options specific to this rc call. If
_config was not supplied then they will be the global options. Likewise
with "_filter".

This call is mostly useful for seeing if _config and _filter passing is
working.

This shows the internal names of the option within rclone which should
map to the external options very easily with a few exceptions.

options/set: Set an option

Parameters:

-   option block name containing an object with
    -   key: value

Repeated as often as required.

Only supply the options you wish to change. If an option is unknown it
will be silently ignored. Not all options will have an effect when
changed like this.

For example:

This sets DEBUG level logs (-vv) (these can be set by number or string)

    rclone rc options/set --json '{"main": {"LogLevel": "DEBUG"}}'
    rclone rc options/set --json '{"main": {"LogLevel": 8}}'

And this sets INFO level logs (-v)

    rclone rc options/set --json '{"main": {"LogLevel": "INFO"}}'

And this sets NOTICE level logs (normal without -v)

    rclone rc options/set --json '{"main": {"LogLevel": "NOTICE"}}'

pluginsctl/addPlugin: Add a plugin using url

Used for adding a plugin to the webgui.

This takes the following parameters:

-   url - http url of the github repo where the plugin is hosted
    (http://github.com/rclone/rclone-webui-react).

Example:

rclone rc pluginsctl/addPlugin

pluginsctl/getPluginsForType: Get plugins with type criteria

This shows all possible plugins by a mime type.

This takes the following parameters:

-   type - supported mime type by a loaded plugin e.g. (video/mp4,
    audio/mp3).
-   pluginType - filter plugins based on their type e.g. (DASHBOARD,
    FILE_HANDLER, TERMINAL).

Returns:

-   loadedPlugins - list of current production plugins.
-   testPlugins - list of temporarily loaded development plugins,
    usually running on a different server.

Example:

rclone rc pluginsctl/getPluginsForType type=video/mp4

pluginsctl/listPlugins: Get the list of currently loaded plugins

This allows you to get the currently enabled plugins and their details.

This takes no parameters and returns:

-   loadedPlugins - list of current production plugins.
-   testPlugins - list of temporarily loaded development plugins,
    usually running on a different server.

E.g.

rclone rc pluginsctl/listPlugins

pluginsctl/listTestPlugins: Show currently loaded test plugins

Allows listing of test plugins with the rclone.test set to true in
package.json of the plugin.

This takes no parameters and returns:

-   loadedTestPlugins - list of currently available test plugins.

E.g.

    rclone rc pluginsctl/listTestPlugins

pluginsctl/removePlugin: Remove a loaded plugin

This allows you to remove a plugin using it's name.

This takes parameters:

-   name - name of the plugin in the format author/plugin_name.

E.g.

rclone rc pluginsctl/removePlugin name=rclone/video-plugin

pluginsctl/removeTestPlugin: Remove a test plugin

This allows you to remove a plugin using it's name.

This takes the following parameters:

-   name - name of the plugin in the format author/plugin_name.

Example:

    rclone rc pluginsctl/removeTestPlugin name=rclone/rclone-webui-react

rc/error: This returns an error

This returns an error with the input as part of its error string. Useful
for testing error handling.

Authentication is not required for this call.

rc/fatal: This returns an fatal error

This returns an error with the input as part of its error string. Useful
for testing error handling.

rc/list: List all the registered remote control commands

This lists all the registered remote control commands as a JSON map in
the commands response.

Authentication is not required for this call.

rc/noop: Echo the input to the output parameters

This echoes the input parameters to the output parameters for testing
purposes. It can be used to check that rclone is still alive and to
check that parameter passing is working properly.

Authentication is not required for this call.

rc/noopauth: Echo the input to the output parameters requiring auth

This echoes the input parameters to the output parameters for testing
purposes. It can be used to check that rclone is still alive and to
check that parameter passing is working properly.

rc/panic: This returns an error by panicking

This returns an error with the input as part of its error string. Useful
for testing error handling.

serve/list: Show running servers

Show running servers with IDs.

This takes no parameters and returns

-   list: list of running serve commands

Each list element will have

-   id: ID of the server
-   addr: address the server is running on
-   params: parameters used to start the server

Eg

    rclone rc serve/list

Returns

    {
        "list": [
            {
                "addr": "[::]:4321",
                "id": "nfs-ffc2a4e5",
                "params": {
                    "fs": "remote:",
                    "opt": {
                        "ListenAddr": ":4321"
                    },
                    "type": "nfs",
                    "vfsOpt": {
                        "CacheMode": "full"
                    }
                }
            }
        ]
    }

serve/start: Create a new server

Create a new server with the specified parameters.

This takes the following parameters:

-   type - type of server: http, webdav, ftp, sftp, nfs, etc.
-   fs - remote storage path to serve
-   addr - the ip:port to run the server on, eg ":1234" or
    "localhost:1234"

Other parameters are as described in the documentation for the relevant
rclone serve command line options. To translate a command line option to
an rc parameter, remove the leading -- and replace - with _, so
--vfs-cache-mode becomes vfs_cache_mode. Note that global parameters
must be set with _config and _filter as described above.

Examples:

    rclone rc serve/start type=nfs fs=remote: addr=:4321 vfs_cache_mode=full
    rclone rc serve/start --json '{"type":"nfs","fs":"remote:","addr":":1234","vfs_cache_mode":"full"}'

This will give the reply

    {
        "addr": "[::]:4321", // Address the server was started on
        "id": "nfs-ecfc6852" // Unique identifier for the server instance
    }

Or an error if it failed to start.

Stop the server with serve/stop and list the running servers with
serve/list.

serve/stop: Unserve selected active serve

Stops a running serve instance by ID.

This takes the following parameters:

-   id: as returned by serve/start

This will give an empty response if successful or an error if not.

Example:

    rclone rc serve/stop id=12345

serve/stopall: Stop all active servers

Stop all active servers.

This will stop all active servers.

    rclone rc serve/stopall

serve/types: Show all possible serve types

This shows all possible serve types and returns them as a list.

This takes no parameters and returns

-   types: list of serve types, eg "nfs", "sftp", etc

The serve types are strings like "serve", "serve2", "cserve" and can be
passed to serve/start as the serveType parameter.

Eg

    rclone rc serve/types

Returns

    {
        "types": [
            "http",
            "sftp",
            "nfs"
        ]
    }

sync/bisync: Perform bidirectional synchronization between two paths.

This takes the following parameters:

-   path1 (required) - (string) a remote directory string e.g.
    drive:path1
-   path2 (required) - (string) a remote directory string e.g.
    drive:path2
-   dryRun - (bool) dry-run mode
-   backupDir1 - (string) --backup-dir for Path1. Must be a
    non-overlapping path on the same remote.
-   backupDir2 - (string) --backup-dir for Path2. Must be a
    non-overlapping path on the same remote.
-   checkAccess - (bool) Ensure expected RCLONE_TEST files are found on
    both Path1 and Path2 filesystems, else abort.
-   checkFilename - (string) Filename for --check-access (default:
    RCLONE_TEST)
-   checkSync - (string) Controls comparison of final listings:
    true|false|only (default: true)
-   compare - (string) Comma-separated list of bisync-specific compare
    options ex. 'size,modtime,checksum' (default: 'size,modtime')
-   conflictLoser - (ConflictLoserAction) Action to take on the loser of
    a sync conflict (when there is a winner) or on both files (when
    there is no winner): , num, pathname, delete (default: num)
-   conflictResolve - (string) Automatically resolve conflicts by
    preferring the version that is: none, path1, path2, newer, older,
    larger, smaller (default: none)
-   conflictSuffix - (string) Suffix to use when renaming a
    --conflict-loser. Can be either one string or two comma-separated
    strings to assign different suffixes to Path1/Path2. (default:
    'conflict')
-   createEmptySrcDirs - (bool) Sync creation and deletion of empty
    directories. (Not compatible with --remove-empty-dirs)
-   downloadHash - (bool) Compute hash by downloading when otherwise
    unavailable. (warning: may be slow and use lots of data!)
-   filtersFile - (string) Read filtering patterns from a file
-   force - (bool) Bypass --max-delete safety check and run the sync.
    Consider using with --verbose
-   ignoreListingChecksum - (bool) Do not use checksums for listings
    (add --ignore- checksum to additionally skip post-copy checksum
    checks)
-   maxLock - (Duration) Consider lock files older than this to be
    expired (default: 0 (never expire)) (minimum: 2m)
-   noCleanup - (bool) Retain working files (useful for troubleshooting
    and testing).
-   noSlowHash - (bool) Ignore listing checksums only on backends where
    they are slow
-   recover - (bool) Automatically recover from interruptions without
    requiring -- resync.
-   removeEmptyDirs - (bool) Remove ALL empty directories at the final
    cleanup step.
-   resilient - (bool) Allow future runs to retry after certain
    less-serious errors, instead of requiring --resync.
-   resync - (bool) Performs the resync run. Equivalent to --resync-mode
    path1. Consider using --verbose or --dry-run first.
-   resyncMode - (string) During resync, prefer the version that is:
    path1, path2, newer, older, larger, smaller (default: path1 if
    --resync, otherwise none for no resync.)
-   slowHashSyncOnly - (bool) Ignore slow checksums for listings and
    deltas, but still consider them during sync calls.
-   workdir - (string) Use custom working dir - useful for testing.
    (default: /home/ncw/.cache/rclone/bisync)

See bisync command help and full bisync description for more
information.

sync/copy: copy a directory from source remote to destination remote

This takes the following parameters:

-   srcFs - a remote name string e.g. "drive:src" for the source
-   dstFs - a remote name string e.g. "drive:dst" for the destination
-   createEmptySrcDirs - create empty src directories on destination if
    set

See the copy command for more information on the above.

sync/move: move a directory from source remote to destination remote

This takes the following parameters:

-   srcFs - a remote name string e.g. "drive:src" for the source
-   dstFs - a remote name string e.g. "drive:dst" for the destination
-   createEmptySrcDirs - create empty src directories on destination if
    set
-   deleteEmptySrcDirs - delete empty src directories if set

See the move command for more information on the above.

sync/sync: sync a directory from source remote to destination remote

This takes the following parameters:

-   srcFs - a remote name string e.g. "drive:src" for the source
-   dstFs - a remote name string e.g. "drive:dst" for the destination
-   createEmptySrcDirs - create empty src directories on destination if
    set

See the sync command for more information on the above.

vfs/forget: Forget files or directories in the directory cache.

This forgets the paths in the directory cache causing them to be re-read
from the remote when needed.

If no paths are passed in then it will forget all the paths in the
directory cache.

    rclone rc vfs/forget

Otherwise pass files or dirs in as file=path or dir=path. Any parameter
key starting with file will forget that file and any starting with dir
will forget that dir, e.g.

    rclone rc vfs/forget file=hello file2=goodbye dir=home/junk

This command takes an "fs" parameter. If this parameter is not supplied
and if there is only one VFS in use then that VFS will be used. If there
is more than one VFS in use then the "fs" parameter must be supplied.

vfs/list: List active VFSes.

This lists the active VFSes.

It returns a list under the key "vfses" where the values are the VFS
names that could be passed to the other VFS commands in the "fs"
parameter.

Authentication is not required for this call.

vfs/poll-interval: Get the status or update the value of the poll-interval option.

Without any parameter given this returns the current status of the
poll-interval setting.

When the interval=duration parameter is set, the poll-interval value is
updated and the polling function is notified. Setting interval=0
disables poll-interval.

    rclone rc vfs/poll-interval interval=5m

The timeout=duration parameter can be used to specify a time to wait for
the current poll function to apply the new value. If timeout is less or
equal 0, which is the default, wait indefinitely.

The new poll-interval value will only be active when the timeout is not
reached.

If poll-interval is updated or disabled temporarily, some changes might
not get picked up by the polling function, depending on the used remote.

This command takes an "fs" parameter. If this parameter is not supplied
and if there is only one VFS in use then that VFS will be used. If there
is more than one VFS in use then the "fs" parameter must be supplied.

vfs/queue: Queue info for a VFS.

This returns info about the upload queue for the selected VFS.

This is only useful if --vfs-cache-mode > off. If you call it when the
--vfs-cache-mode is off, it will return an empty result.

    {
        "queue": // an array of files queued for upload
        [
            {
                "name":      "file",   // string: name (full path) of the file,
                "id":        123,      // integer: id of this item in the queue,
                "size":      79,       // integer: size of the file in bytes
                "expiry":    1.5       // float: time until file is eligible for transfer, lowest goes first
                "tries":     1,        // integer: number of times we have tried to upload
                "delay":     5.0,      // float: seconds between upload attempts
                "uploading": false,    // boolean: true if item is being uploaded
            },
       ],
    }

The expiry time is the time until the file is eligible for being
uploaded in floating point seconds. This may go negative. As rclone only
transfers --transfers files at once, only the lowest --transfers expiry
times will have uploading as true. So there may be files with negative
expiry times for which uploading is false.

This command takes an "fs" parameter. If this parameter is not supplied
and if there is only one VFS in use then that VFS will be used. If there
is more than one VFS in use then the "fs" parameter must be supplied.

Authentication is not required for this call.

vfs/queue-set-expiry: Set the expiry time for an item queued for upload.

Use this to adjust the expiry time for an item in the upload queue. You
will need to read the id of the item using vfs/queue before using this
call.

You can then set expiry to a floating point number of seconds from now
when the item is eligible for upload. If you want the item to be
uploaded as soon as possible then set it to a large negative number (eg
-1000000000). If you want the upload of the item to be delayed for a
long time then set it to a large positive number.

Setting the expiry of an item which has already has started uploading
will have no effect - the item will carry on being uploaded.

This will return an error if called with --vfs-cache-mode off or if the
id passed is not found.

This takes the following parameters

-   fs - select the VFS in use (optional)
-   id - a numeric ID as returned from vfs/queue
-   expiry - a new expiry time as floating point seconds
-   relative - if set, expiry is to be treated as relative to the
    current expiry (optional, boolean)

This returns an empty result on success, or an error.

This command takes an "fs" parameter. If this parameter is not supplied
and if there is only one VFS in use then that VFS will be used. If there
is more than one VFS in use then the "fs" parameter must be supplied.

vfs/refresh: Refresh the directory cache.

This reads the directories for the specified paths and freshens the
directory cache.

If no paths are passed in then it will refresh the root directory.

    rclone rc vfs/refresh

Otherwise pass directories in as dir=path. Any parameter key starting
with dir will refresh that directory, e.g.

    rclone rc vfs/refresh dir=home/junk dir2=data/misc

If the parameter recursive=true is given the whole directory tree will
get refreshed. This refresh will use --fast-list if enabled.

This command takes an "fs" parameter. If this parameter is not supplied
and if there is only one VFS in use then that VFS will be used. If there
is more than one VFS in use then the "fs" parameter must be supplied.

vfs/stats: Stats for a VFS.

This returns stats for the selected VFS.

    {
        // Status of the disk cache - only present if --vfs-cache-mode > off
        "diskCache": {
            "bytesUsed": 0,
            "erroredFiles": 0,
            "files": 0,
            "hashType": 1,
            "outOfSpace": false,
            "path": "/home/user/.cache/rclone/vfs/local/mnt/a",
            "pathMeta": "/home/user/.cache/rclone/vfsMeta/local/mnt/a",
            "uploadsInProgress": 0,
            "uploadsQueued": 0
        },
        "fs": "/mnt/a",
        "inUse": 1,
        // Status of the in memory metadata cache
        "metadataCache": {
            "dirs": 1,
            "files": 0
        },
        // Options as returned by options/get
        "opt": {
            "CacheMaxAge": 3600000000000,
            // ...
            "WriteWait": 1000000000
        }
    }

This command takes an "fs" parameter. If this parameter is not supplied
and if there is only one VFS in use then that VFS will be used. If there
is more than one VFS in use then the "fs" parameter must be supplied.

Authentication is not required for this call.

Accessing the remote control via HTTP

Rclone implements a simple HTTP based protocol.

Each endpoint takes an JSON object and returns a JSON object or an
error. The JSON objects are essentially a map of string names to values.

All calls must made using POST.

The input objects can be supplied using URL parameters, POST parameters
or by supplying "Content-Type: application/json" and a JSON blob in the
body. There are examples of these below using curl.

The response will be a JSON blob in the body of the response. This is
formatted to be reasonably human-readable.

Error returns

If an error occurs then there will be an HTTP error status (e.g. 500)
and the body of the response will contain a JSON encoded error object,
e.g.

    {
        "error": "Expecting string value for key \"remote\" (was float64)",
        "input": {
            "fs": "/tmp",
            "remote": 3
        },
        "status": 400,
        "path": "operations/rmdir"
    }

The keys in the error response are:

-   error - error string
-   input - the input parameters to the call
-   status - the HTTP status code
-   path - the path of the call

CORS

The sever implements basic CORS support and allows all origins for that.
The response to a preflight OPTIONS request will echo the requested
"Access-Control-Request-Headers" back.

Using POST with URL parameters only

    curl -X POST 'http://localhost:5572/rc/noop?potato=1&sausage=2'

Response

    {
        "potato": "1",
        "sausage": "2"
    }

Here is what an error response looks like:

    curl -X POST 'http://localhost:5572/rc/error?potato=1&sausage=2'

    {
        "error": "arbitrary error on input map[potato:1 sausage:2]",
        "input": {
            "potato": "1",
            "sausage": "2"
        }
    }

Note that curl doesn't return errors to the shell unless you use the -f
option

    $ curl -f -X POST 'http://localhost:5572/rc/error?potato=1&sausage=2'
    curl: (22) The requested URL returned error: 400 Bad Request
    $ echo $?
    22

Using POST with a form

    curl --data "potato=1" --data "sausage=2" http://localhost:5572/rc/noop

Response

    {
        "potato": "1",
        "sausage": "2"
    }

Note that you can combine these with URL parameters too with the POST
parameters taking precedence.

    curl --data "potato=1" --data "sausage=2" "http://localhost:5572/rc/noop?rutabaga=3&sausage=4"

Response

    {
        "potato": "1",
        "rutabaga": "3",
        "sausage": "4"
    }

Using POST with a JSON blob

    curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' http://localhost:5572/rc/noop

response

    {
        "password": "xyz",
        "username": "xyz"
    }

This can be combined with URL parameters too if required. The JSON blob
takes precedence.

    curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' 'http://localhost:5572/rc/noop?rutabaga=3&potato=4'

    {
        "potato": 2,
        "rutabaga": "3",
        "sausage": 1
    }

Debugging rclone with pprof

If you use the --rc flag this will also enable the use of the go
profiling tools on the same port.

To use these, first install go.

Debugging memory use

To profile rclone's memory use you can run:

    go tool pprof -web http://localhost:5572/debug/pprof/heap

This should open a page in your browser showing what is using what
memory.

You can also use the -text flag to produce a textual summary

    $ go tool pprof -text http://localhost:5572/debug/pprof/heap
    Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
          flat  flat%   sum%        cum   cum%
     1024.03kB 66.62% 66.62%  1024.03kB 66.62%  github.com/rclone/rclone/vendor/golang.org/x/net/http2/hpack.addDecoderNode
         513kB 33.38%   100%      513kB 33.38%  net/http.newBufioWriterSize
             0     0%   100%  1024.03kB 66.62%  github.com/rclone/rclone/cmd/all.init
             0     0%   100%  1024.03kB 66.62%  github.com/rclone/rclone/cmd/serve.init
             0     0%   100%  1024.03kB 66.62%  github.com/rclone/rclone/cmd/serve/restic.init
             0     0%   100%  1024.03kB 66.62%  github.com/rclone/rclone/vendor/golang.org/x/net/http2.init
             0     0%   100%  1024.03kB 66.62%  github.com/rclone/rclone/vendor/golang.org/x/net/http2/hpack.init
             0     0%   100%  1024.03kB 66.62%  github.com/rclone/rclone/vendor/golang.org/x/net/http2/hpack.init.0
             0     0%   100%  1024.03kB 66.62%  main.init
             0     0%   100%      513kB 33.38%  net/http.(*conn).readRequest
             0     0%   100%      513kB 33.38%  net/http.(*conn).serve
             0     0%   100%  1024.03kB 66.62%  runtime.main

Debugging go routine leaks

Memory leaks are most often caused by go routine leaks keeping memory
alive which should have been garbage collected.

See all active go routines using

    curl http://localhost:5572/debug/pprof/goroutine?debug=1

Or go to http://localhost:5572/debug/pprof/goroutine?debug=1 in your
browser.

Other profiles to look at

You can see a summary of profiles available at
http://localhost:5572/debug/pprof/

Here is how to use some of them:

-   Memory: go tool pprof http://localhost:5572/debug/pprof/heap
-   Go routines:
    curl http://localhost:5572/debug/pprof/goroutine?debug=1
-   30-second CPU profile:
    go tool pprof http://localhost:5572/debug/pprof/profile
-   5-second execution trace:
    wget http://localhost:5572/debug/pprof/trace?seconds=5
-   Goroutine blocking profile
    -   Enable first with: rclone rc debug/set-block-profile-rate rate=1
        (docs)
    -   go tool pprof http://localhost:5572/debug/pprof/block
-   Contended mutexes:
    -   Enable first with:
        rclone rc debug/set-mutex-profile-fraction rate=1 (docs)
    -   go tool pprof http://localhost:5572/debug/pprof/mutex

See the net/http/pprof docs for more info on how to use the profiling
and for a general overview see the Go team's blog post on profiling go
programs.

The profiling hook is zero overhead unless it is used.

Overview of cloud storage systems

Each cloud storage system is slightly different. Rclone attempts to
provide a unified interface to them, but some underlying differences
show through.

Features

Here is an overview of the major features of each cloud storage system.

Hash

The cloud storage system supports various hash types of the objects. The
hashes are used when transferring data as an integrity check and can be
specifically used with the --checksum flag in syncs and in the check
command.

To use the verify checksums when transferring between cloud storage
systems they must support a common hash type.

ModTime

Almost all cloud storage systems store some sort of timestamp on
objects, but several of them not something that is appropriate to use
for syncing. E.g. some backends will only write a timestamp that
represents the time of the upload. To be relevant for syncing it should
be able to store the modification time of the source object. If this is
not the case, rclone will only check the file size by default, though
can be configured to check the file hash (with the --checksum flag).
Ideally it should also be possible to change the timestamp of an
existing file without having to re-upload it.

  -----------------------------------------------------------------------
  Key                 Explanation
  ------------------- ---------------------------------------------------
  -                   ModTimes not supported - times likely the upload
                      time

  R                   ModTimes supported on files but can't be changed
                      without re-upload

  R/W                 Read and Write ModTimes fully supported on files

  DR                  ModTimes supported on files and directories but
                      can't be changed without re-upload

  DR/W                Read and Write ModTimes fully supported on files
                      and directories
  -----------------------------------------------------------------------

Storage systems with a - in the ModTime column, means the modification
read on objects is not the modification time of the file when uploaded.
It is most likely the time the file was uploaded, or possibly something
else (like the time the picture was taken in Google Photos).

Storage systems with a R (for read-only) in the ModTime column, means
the it keeps modification times on objects, and updates them when
uploading objects, but it does not support changing only the
modification time (SetModTime operation) without re-uploading, possibly
not even without deleting existing first. Some operations in rclone,
such as copy and sync commands, will automatically check for SetModTime
support and re-upload if necessary to keep the modification times in
sync. Other commands will not work without SetModTime support, e.g.
touch command on an existing file will fail, and changes to modification
time only on a files in a mount will be silently ignored.

Storage systems with R/W (for read/write) in the ModTime column, means
they do also support modtime-only operations.

Storage systems with D in the ModTime column means that the following
symbols apply to directories as well as files.

Case Insensitive

If a cloud storage systems is case sensitive then it is possible to have
two files which differ only in case, e.g. file.txt and FILE.txt. If a
cloud storage system is case insensitive then that isn't possible.

This can cause problems when syncing between a case insensitive system
and a case sensitive system. The symptom of this is that no matter how
many times you run the sync it never completes fully.

The local filesystem and SFTP may or may not be case sensitive depending
on OS.

-   Windows - usually case insensitive, though case is preserved
-   OSX - usually case insensitive, though it is possible to format case
    sensitive
-   Linux - usually case sensitive, but there are case insensitive file
    systems (e.g. FAT formatted USB keys)

Most of the time this doesn't cause any problems as people tend to avoid
files whose name differs only by case even on case sensitive systems.

Duplicate files

If a cloud storage system allows duplicate files then it can have two
objects with the same name.

This confuses rclone greatly when syncing - use the rclone dedupe
command to rename or remove duplicates.

Restricted filenames

Some cloud storage systems might have restrictions on the characters
that are usable in file or directory names. When rclone detects such a
name during a file upload, it will transparently replace the restricted
characters with similar looking Unicode characters. To handle the
different sets of restricted characters for different backends, rclone
uses something it calls encoding.

This process is designed to avoid ambiguous file names as much as
possible and allow to move files between many cloud storage systems
transparently.

The name shown by rclone to the user or during log output will only
contain a minimal set of replaced characters to ensure correct
formatting and not necessarily the actual name used on the cloud
storage.

This transformation is reversed when downloading a file or parsing
rclone arguments. For example, when uploading a file named my file?.txt
to Onedrive, it will be displayed as my file?.txt on the console, but
stored as my file？.txt to Onedrive (the ? gets replaced by the similar
looking ？ character, the so-called "fullwidth question mark"). The
reverse transformation allows to read a file unusual/name.txt from
Google Drive, by passing the name unusual／name.txt on the command line
(the / needs to be replaced by the similar looking ／ character).

Caveats

The filename encoding system works well in most cases, at least where
file names are written in English or similar languages. You might not
even notice it: It just works. In some cases it may lead to issues,
though. E.g. when file names are written in Chinese, or Japanese, where
it is always the Unicode fullwidth variants of the punctuation marks
that are used.

On Windows, the characters :, * and ? are examples of restricted
characters. If these are used in filenames on a remote that supports it,
Rclone will transparently convert them to their fullwidth Unicode
variants ＊, ？ and ： when downloading to Windows, and back again when
uploading. This way files with names that are not allowed on Windows can
still be stored.

However, if you have files on your Windows system originally with these
same Unicode characters in their names, they will be included in the
same conversion process. E.g. if you create a file in your Windows
filesystem with name Test：1.jpg, where ： is the Unicode fullwidth
colon symbol, and use rclone to upload it to Google Drive, which
supports regular : (halfwidth question mark), rclone will replace the
fullwidth : with the halfwidth : and store the file as Test:1.jpg in
Google Drive. Since both Windows and Google Drive allows the name
Test：1.jpg, it would probably be better if rclone just kept the name as
is in this case.

With the opposite situation; if you have a file named Test:1.jpg, in
your Google Drive, e.g. uploaded from a Linux system where : is valid in
file names. Then later use rclone to copy this file to your Windows
computer you will notice that on your local disk it gets renamed to
Test：1.jpg. The original filename is not legal on Windows, due to the
:, and rclone therefore renames it to make the copy possible. That is
all good. However, this can also lead to an issue: If you already had a
different file named Test：1.jpg on Windows, and then use rclone to copy
either way. Rclone will then treat the file originally named Test:1.jpg
on Google Drive and the file originally named Test：1.jpg on Windows as
the same file, and replace the contents from one with the other.

Its virtually impossible to handle all cases like these correctly in all
situations, but by customizing the encoding option, changing the set of
characters that rclone should convert, you should be able to create a
configuration that works well for your specific situation. See also the
example below.

(Windows was used as an example of a file system with many restricted
characters, and Google drive a storage system with few.)

Default restricted characters

The table below shows the characters that are replaced by default.

When a replacement character is found in a filename, this character will
be escaped with the ‛ character to avoid ambiguous file names. (e.g. a
file named ␀.txt would shown as ‛␀.txt)

Each cloud storage backend can use a different set of characters, which
will be specified in the documentation for each backend.

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  SOH          0x01         ␁
  STX          0x02         ␂
  ETX          0x03         ␃
  EOT          0x04         ␄
  ENQ          0x05         ␅
  ACK          0x06         ␆
  BEL          0x07         ␇
  BS           0x08         ␈
  HT           0x09         ␉
  LF           0x0A         ␊
  VT           0x0B         ␋
  FF           0x0C         ␌
  CR           0x0D         ␍
  SO           0x0E         ␎
  SI           0x0F         ␏
  DLE          0x10         ␐
  DC1          0x11         ␑
  DC2          0x12         ␒
  DC3          0x13         ␓
  DC4          0x14         ␔
  NAK          0x15         ␕
  SYN          0x16         ␖
  ETB          0x17         ␗
  CAN          0x18         ␘
  EM           0x19         ␙
  SUB          0x1A         ␚
  ESC          0x1B         ␛
  FS           0x1C         ␜
  GS           0x1D         ␝
  RS           0x1E         ␞
  US           0x1F         ␟
  /            0x2F        ／
  DEL          0x7F         ␡

The default encoding will also encode these file names as they are
problematic with many cloud storage systems.

  File name    Replacement
  ----------- -------------
  .                ．
  ..              ．．

Invalid UTF-8 bytes

Some backends only support a sequence of well formed UTF-8 bytes as file
or directory names.

In this case all invalid UTF-8 bytes will be replaced with a quoted
representation of the byte value to allow uploading a file to such a
backend. For example, the invalid byte 0xFE will be encoded as ‛FE.

A common source of invalid UTF-8 bytes are local filesystems, that store
names in a different encoding than UTF-8 or UTF-16, like latin1. See the
local filenames section for details.

Encoding option

Most backends have an encoding option, specified as a flag
--backend-encoding where backend is the name of the backend, or as a
config parameter encoding (you'll need to select the Advanced config in
rclone config to see it).

This will have default value which encodes and decodes characters in
such a way as to preserve the maximum number of characters (see above).

However this can be incorrect in some scenarios, for example if you have
a Windows file system with Unicode fullwidth characters ＊, ？ or ：,
that you want to remain as those characters on the remote rather than
being translated to regular (halfwidth) *, ? and :.

The --backend-encoding flags allow you to change that. You can disable
the encoding completely with --backend-encoding Raw or set
encoding = Raw in the config file.

Encoding takes a comma separated list of encodings. You can see the list
of all possible values by passing an invalid value to this flag, e.g.
--local-encoding "help". The command rclone help flags encoding will
show you the defaults for the backends.

  ----------------------------------------------------------------------------------
  Encoding               Characters               Encoded as
  ---------------------- ------------------------ ----------------------------------
  Asterisk               *                        ＊

  BackQuote              `                        ｀

  BackSlash              \                        ＼

  Colon                  :                        ：

  CrLf                   CR 0x0D, LF 0x0A         ␍, ␊

  Ctl                    All control characters   ␀␁␂␃␄␅␆␇␈␉␊␋␌␍␎␏␐␑␒␓␔␕␖␗␘␙␚␛␜␝␞␟
                         0x00-0x1F                

  Del                    DEL 0x7F                 ␡

  Dollar                 $                        ＄

  Dot                    . or .. as entire string ．, ．．

  DoubleQuote            "                        ＂

  Exclamation            !                        ！

  Hash                   #                        ＃

  InvalidUtf8            An invalid UTF-8         �
                         character (e.g. latin1)  

  LeftCrLfHtVt           CR 0x0D, LF 0x0A, HT     ␍, ␊, ␉, ␋
                         0x09, VT 0x0B on the     
                         left of a string         

  LeftPeriod             . on the left of a       .
                         string                   

  LeftSpace              SPACE on the left of a   ␠
                         string                   

  LeftTilde              ~ on the left of a       ～
                         string                   

  LtGt                   <, >                     ＜, ＞

  None ¹                 NUL 0x00                 ␀

  Percent                %                        ％

  Pipe                   |                        ｜

  Question               ?                        ？

  RightCrLfHtVt          CR 0x0D, LF 0x0A, HT     ␍, ␊, ␉, ␋
                         0x09, VT 0x0B on the     
                         right of a string        

  RightPeriod            . on the right of a      .
                         string                   

  RightSpace             SPACE on the right of a  ␠
                         string                   

  Semicolon              ;                        ；

  SingleQuote            '                        ＇

  Slash                  /                        ／

  SquareBracket          [, ]                     ［, ］
  ----------------------------------------------------------------------------------

¹ Encoding from NUL 0x00 to ␀ is always implicit except when using Raw.
It was previously incorrectly documented as disabling encoding, and to
maintain backward compatibility, its behavior has not been changed.

Encoding example: FTP

To take a specific example, the FTP backend's default encoding is

    --ftp-encoding "Slash,Del,Ctl,RightSpace,Dot"

However, let's say the FTP server is running on Windows and can't have
any of the invalid Windows characters in file names. You are backing up
Linux servers to this FTP server which do have those characters in file
names. So you would add the Windows set which are

    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,RightSpace,RightPeriod,InvalidUtf8,Dot

to the existing ones, giving:

    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,RightSpace,RightPeriod,InvalidUtf8,Dot,Del,RightSpace

This can be specified using the --ftp-encoding flag or using an encoding
parameter in the config file.

Encoding example: Windows

As another example, take a Windows system where there is a file with
name Test：1.jpg, where ： is the Unicode fullwidth colon symbol. When
using rclone to copy this to a remote which supports :, the regular
(halfwidth) colon (such as Google Drive), you will notice that the file
gets renamed to Test:1.jpg.

To avoid this you can change the set of characters rclone should convert
for the local filesystem, using command-line argument --local-encoding.
Rclone's default behavior on Windows corresponds to

    --local-encoding "Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,RightSpace,RightPeriod,InvalidUtf8,Dot"

If you want to use fullwidth characters ：, ＊ and ？ in your filenames
without rclone changing them when uploading to a remote, then set the
same as the default value but without Colon,Question,Asterisk:

    --local-encoding "Slash,LtGt,DoubleQuote,Pipe,BackSlash,Ctl,RightSpace,RightPeriod,InvalidUtf8,Dot"

Alternatively, you can disable the conversion of any characters with
--local-encoding Raw.

Instead of using command-line argument --local-encoding, you may also
set it as environment variable RCLONE_LOCAL_ENCODING, or configure a
remote of type local in your config, and set the encoding option there.

The risk by doing this is that if you have a filename with the regular
(halfwidth) :, * and ? in your cloud storage, and you try to download it
to your Windows filesystem, this will fail. These characters are not
valid in filenames on Windows, and you have told rclone not to work
around this by converting them to valid fullwidth variants.

MIME Type

MIME types (also known as media types) classify types of documents using
a simple text classification, e.g. text/html or application/pdf.

Some cloud storage systems support reading (R) the MIME type of objects
and some support writing (W) the MIME type of objects.

The MIME type can be important if you are serving files directly to HTTP
from the storage system.

If you are copying from a remote which supports reading (R) to a remote
which supports writing (W) then rclone will preserve the MIME types.
Otherwise they will be guessed from the extension, or the remote itself
may assign the MIME type.

Metadata

Backends may or may support reading or writing metadata. They may
support reading and writing system metadata (metadata intrinsic to that
backend) and/or user metadata (general purpose metadata).

The levels of metadata support are

  -----------------------------------------------------------------------
  Key                 Explanation
  ------------------- ---------------------------------------------------
  R                   Read only System Metadata on files only

  RW                  Read and write System Metadata on files only

  RWU                 Read and write System Metadata and read and write
                      User Metadata on files only

  DR                  Read only System Metadata on files and directories

  DRW                 Read and write System Metadata on files and
                      directories

  DRWU                Read and write System Metadata and read and write
                      User Metadata on files and directories
  -----------------------------------------------------------------------

See the metadata docs for more info.

Optional Features

All rclone remotes support a base command set. Other features depend
upon backend-specific capabilities.

Purge

This deletes a directory quicker than just deleting all the files in the
directory.

Copy

Used when copying an object to and from the same remote. This known as a
server-side copy so you can copy a file without downloading it and
uploading it again. It is used if you use rclone copy or rclone move if
the remote doesn't support Move directly.

If the server doesn't support Copy directly then for copy operations the
file is downloaded then re-uploaded.

Move

Used when moving/renaming an object on the same remote. This is known as
a server-side move of a file. This is used in rclone move if the server
doesn't support DirMove.

If the server isn't capable of Move then rclone simulates it with Copy
then delete. If the server doesn't support Copy then rclone will
download the file and re-upload it.

DirMove

This is used to implement rclone move to move a directory if possible.
If it isn't then it will use Move on each file (which falls back to Copy
then download and upload - see Move section).

CleanUp

This is used for emptying the trash for a remote by rclone cleanup.

If the server can't do CleanUp then rclone cleanup will return an error.

‡‡ Note that while Box implements this it has to delete every file
individually so it will be slower than emptying the trash via the WebUI

ListR

The remote supports a recursive list to list all the contents beneath a
directory quickly. This enables the --fast-list flag to work. See the
rclone docs for more details.

StreamUpload

Some remotes allow files to be uploaded without knowing the file size in
advance. This allows certain operations to work without spooling the
file to local disk first, e.g. rclone rcat.

MultithreadUpload

Some remotes allow transfers to the remote to be sent as chunks in
parallel. If this is supported then rclone will use multi-thread copying
to transfer files much faster.

LinkSharing

Sets the necessary permissions on a file or folder and prints a link
that allows others to access them, even if they don't have an account on
the particular cloud provider.

About

Rclone about prints quota information for a remote. Typical output
includes bytes used, free, quota and in trash.

If a remote lacks about capability rclone about remote:returns an error.

Backends without about capability cannot determine free space for an
rclone mount, or use policy mfs (most free space) as a member of an
rclone union remote.

See rclone about command

EmptyDir

The remote supports empty directories. See Limitations for details. Most
Object/Bucket-based remotes do not support this.

Tiers

Rclone backends are divided into tiers to give users an idea of the
stability of each backend.

  Tier   Label          Intended meaning
  ------ -------------- ------------------------------------
         Core           Production-grade, first-class
         Stable         Well-supported, minor gaps
         Supported      Works for many uses; known caveats
         Experimental   Use with care; expect gaps/changes
         Deprecated     No longer maintained or supported

Overview

Here is a summary of all backends:

Scoring

Here is how the backends are scored.

Features

These are useful optional features a backend should have in rough order
of importance. Each one of these scores a point for the Features column.

-   F1: Hash(es)
-   F2: Modtime
-   F3: Stream upload
-   F4: Copy/Move
-   F5: DirMove
-   F6: Metadata
-   F7: MultipartUpload

Tier

The tier is decided after determining these attributes. Some discretion
is allowed in tiering as some of these attributes are more important
than others.

  ---------------------------------------------------------------------------------------------------------
  Attr           T1: Core                       T2: Stable   T3: Supported  T4: Experimental T5: Incubator
  -------------- ------------------------------ ------------ -------------- ---------------- --------------
  Maintainers    >=2                            >=1          >=1            >=0              >=0

  API source     Official                       Official     Either         Either           Either

  Features       >=5/7                          >=4/7        >=3/7          >=2/7            N/A
  (F1-F7)                                                                                    

  Integration    All Green                      All green    Nearly all     Some Flaky       N/A
  tests                                                      green                           

  Error handling Pacer                          Pacer        Retries        Retries          N/A

  Data integrity Hashes, alt, modtime           Hashes or    Hash OR        Best-effort      N/A
                                                alt          modtime                         

  Perf baseline  Bench within 2x S3             Bench doc    Anecdotal OK   Optional         N/A

  Adoption       widely used                    often used   some use       N/A              N/A

  Docs           Full                           Full         Basic          Minimal          Minimal
  completeness                                                                               

  Security       Principle-of-least-privilege   Reasonable   Basic auth     Works            Works
                                                scopes                                       
  ---------------------------------------------------------------------------------------------------------

Global Flags

This describes the global flags available to every rclone command split
into groups.

Copy

Flags for anything which can copy a file.

          --check-first                                 Do all the checks before starting transfers
      -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
          --compare-dest stringArray                    Include additional server-side paths during comparison
          --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
          --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
          --ignore-case-sync                            Ignore case when synchronizing
          --ignore-checksum                             Skip post copy check of checksums
          --ignore-existing                             Skip all files that exist on destination
          --ignore-size                                 Ignore size when skipping use modtime or checksum
      -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
          --immutable                                   Do not modify files, fail if existing files have been modified
          --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
          --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
          --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
          --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
      -M, --metadata                                    If set, preserve metadata when copying objects
          --modify-window Duration                      Max time diff to be considered the same (default 1ns)
          --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
          --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
          --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
          --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
          --name-transform stringArray                  Transform paths during the copy process
          --no-check-dest                               Don't check the destination, copy regardless
          --no-traverse                                 Don't traverse destination file system on copy
          --no-update-dir-modtime                       Don't update directory modification times
          --no-update-modtime                           Don't update destination modtime if files identical
          --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
          --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
          --refresh-times                               Refresh the modtime of remote files
          --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
          --size-only                                   Skip based on size only, not modtime or checksum
          --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
      -u, --update                                      Skip files that are newer on the destination

Sync

Flags used for sync commands.

          --backup-dir string               Make backups into hierarchy based in DIR
          --delete-after                    When synchronizing, delete files on destination after transferring (default)
          --delete-before                   When synchronizing, delete files on destination before transferring
          --delete-during                   When synchronizing, delete files during transfer
          --fix-case                        Force rename of case insensitive dest to match source
          --ignore-errors                   Delete even if there are I/O errors
          --list-cutoff int                 To save memory, sort directory listings on disk above this threshold (default 1000000)
          --max-delete int                  When synchronizing, limit the number of deletes (default -1)
          --max-delete-size SizeSuffix      When synchronizing, limit the total size of deletes (default off)
          --suffix string                   Suffix to add to changed files
          --suffix-keep-extension           Preserve the extension when using --suffix
          --track-renames                   When synchronizing, track file renames and do a server-side move if possible
          --track-renames-strategy string   Strategies to use when synchronizing using track-renames hash|modtime|leaf (default "hash")

Important

Important flags useful for most commands.

      -n, --dry-run         Do a trial run with no permanent changes
      -i, --interactive     Enable interactive mode
      -v, --verbose count   Print lots more stuff (repeat for more)

Check

Flags used for check commands.

          --max-backlog int   Maximum number of objects in sync or check backlog (default 10000)

Networking

Flags for general networking and HTTP stuff.

          --bind string                        Local address to bind to for outgoing connections, IPv4, IPv6 or name
          --bwlimit BwTimetable                Bandwidth limit in KiB/s, or use suffix B|K|M|G|T|P or a full timetable
          --bwlimit-file BwTimetable           Bandwidth limit per file in KiB/s, or use suffix B|K|M|G|T|P or a full timetable
          --ca-cert stringArray                CA certificate used to verify servers
          --client-cert string                 Client SSL certificate (PEM) for mutual TLS auth
          --client-key string                  Client SSL private key (PEM) for mutual TLS auth
          --client-pass string                 Password for client SSL private key (PEM) for mutual TLS auth (obscured) (obscured)
          --contimeout Duration                Connect timeout (default 1m0s)
          --disable-http-keep-alives           Disable HTTP keep-alives and use each connection once
          --disable-http2                      Disable HTTP/2 in the global transport
          --dscp string                        Set DSCP value to connections, value or name, e.g. CS1, LE, DF, AF21
          --expect-continue-timeout Duration   Timeout when using expect / 100-continue in HTTP (default 1s)
          --header stringArray                 Set HTTP header for all transactions
          --header-download stringArray        Set HTTP header for download transactions
          --header-upload stringArray          Set HTTP header for upload transactions
          --http-proxy string                  HTTP proxy URL
          --max-connections int                Maximum number of simultaneous backend API connections, 0 for unlimited
          --no-check-certificate               Do not verify the server SSL certificate (insecure)
          --no-gzip-encoding                   Don't set Accept-Encoding: gzip
          --timeout Duration                   IO idle timeout (default 5m0s)
          --tpslimit float                     Limit HTTP transactions per second to this
          --tpslimit-burst int                 Max burst of transactions for --tpslimit (default 1)
          --use-cookies                        Enable session cookiejar
          --user-agent string                  Set the user-agent to a specified string (default "rclone/v1.74.3")

Performance

Flags helpful for increasing performance.

          --buffer-size SizeSuffix   In memory buffer size when reading files for each --transfer (default 16Mi)
          --checkers int             Number of checkers to run in parallel (default 8)
          --transfers int            Number of file transfers to run in parallel (default 4)

Config

Flags for general configuration of rclone.

          --ask-password                        Allow prompt for password for encrypted configuration (default true)
          --auto-confirm                        If enabled, do not request console confirmation
          --cache-dir string                    Directory rclone will use for caching (default "$HOME/.cache/rclone")
          --color AUTO|NEVER|ALWAYS             When to show colors (and other ANSI codes) AUTO|NEVER|ALWAYS (default AUTO)
          --config string                       Config file (default "$HOME/.config/rclone/rclone.conf")
          --default-time Time                   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --disable string                      Disable a comma separated list of features (use --disable help to see a list)
      -n, --dry-run                             Do a trial run with no permanent changes
          --error-on-no-transfer                Sets exit code 9 if no files are transferred, useful in scripts
          --fs-cache-expire-duration Duration   Cache remotes for this long (0 to disable caching) (default 5m0s)
          --fs-cache-expire-interval Duration   Interval to check for expired remotes (default 1m0s)
          --human-readable                      Print numbers in a human-readable format, sizes with suffix Ki|Mi|Gi|Ti|Pi
      -i, --interactive                         Enable interactive mode
          --kv-lock-time Duration               Maximum time to keep key-value database locked by process (default 1s)
          --low-level-retries int               Number of low level retries to do (default 10)
          --max-buffer-memory SizeSuffix        If set, don't allocate more than this amount of memory as buffers (default off)
          --no-console                          Hide console window (supported on Windows only)
          --no-unicode-normalization            Don't normalize unicode characters in filenames
          --password-command SpaceSepList       Command for supplying password for encrypted configuration
          --retries int                         Retry operations this many times if they fail (default 3)
          --retries-sleep Duration              Interval between retrying operations if they fail, e.g. 500ms, 60s, 5m (0 to disable) (default 0s)
          --temp-dir string                     Directory rclone will use for temporary files (default "/tmp")
          --use-mmap                            Use mmap allocator (see docs)
          --use-server-modtime                  Use server modified time instead of object metadata

Debugging

Flags for developers.

          --cpuprofile string   Write cpu profile to file
          --dump DumpFlags      List of items to dump from: headers, bodies, requests, responses, auth, filters, goroutines, openfiles, mapper, curl
          --dump-bodies         Dump HTTP headers and bodies - may contain sensitive info
          --dump-headers        Dump HTTP headers - may contain sensitive info
          --memprofile string   Write memory profile to file

Filter

Flags for filtering directory listings.

          --delete-excluded                     Delete files on dest excluded from sync
          --exclude stringArray                 Exclude files matching pattern
          --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
          --exclude-if-present stringArray      Exclude directories if filename is present
          --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
          --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      -f, --filter stringArray                  Add a file filtering rule
          --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
          --hash-filter string                  Partition filenames by hash k/n or randomly @/n
          --ignore-case                         Ignore case in filters (case insensitive)
          --include stringArray                 Include files matching pattern
          --include-from stringArray            Read file include patterns from file (use - to read from stdin)
          --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --max-depth int                       If set limits the recursion depth to this (default -1)
          --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
          --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

Listing

Flags for listing directories.

          --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
          --fast-list           Use recursive list if available; uses more memory but fewer transactions

Logging

Flags for logging and statistics.

          --log-file string                     Log everything to this file
          --log-file-compress                   If set, compress rotated log files using gzip
          --log-file-max-age Duration           Maximum duration to retain old log files (eg "7d") (default 0s)
          --log-file-max-backups int            Maximum number of old log files to retain
          --log-file-max-size SizeSuffix        Maximum size of the log file before it's rotated (eg "10M") (default off)
          --log-format Bits                     Comma separated list of log format options (default date,time)
          --log-level LogLevel                  Log level DEBUG|INFO|NOTICE|ERROR (default NOTICE)
          --log-systemd                         Activate systemd integration for the logger
          --max-stats-groups int                Maximum number of stats groups to keep in memory, on max oldest is discarded (default 1000)
      -P, --progress                            Show progress during transfer
          --progress-terminal-title             Show progress on the terminal title (requires -P/--progress)
      -q, --quiet                               Print as little stuff as possible
          --stats Duration                      Interval between printing stats, e.g. 500ms, 60s, 5m (0 to disable) (default 1m0s)
          --stats-file-name-length int          Max file name length in stats (0 for no limit) (default 45)
          --stats-log-level LogLevel            Log level to show --stats output DEBUG|INFO|NOTICE|ERROR (default INFO)
          --stats-one-line                      Make the stats fit on one line
          --stats-one-line-date                 Enable --stats-one-line and add current date/time prefix
          --stats-one-line-date-format string   Enable --stats-one-line-date and use custom formatted date: Enclose date string in double quotes ("), see https://golang.org/pkg/time/#Time.Format
          --stats-unit string                   Show data rate in stats as either 'bits' or 'bytes' per second (default "bytes")
          --syslog                              Use Syslog for logging
          --syslog-facility string              Facility for syslog, e.g. KERN,USER (default "DAEMON")
          --use-json-log                        Use json log format
      -v, --verbose count                       Print lots more stuff (repeat for more)

Metadata

Flags to control metadata.

      -M, --metadata                            If set, preserve metadata when copying objects
          --metadata-exclude stringArray        Exclude metadatas matching pattern
          --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
          --metadata-filter stringArray         Add a metadata filtering rule
          --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
          --metadata-include stringArray        Include metadatas matching pattern
          --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
          --metadata-mapper SpaceSepList        Program to run to transforming metadata before upload
          --metadata-set stringArray            Add metadata key=value when uploading

RC

Flags to control the Remote Control API.

          --rc                                 Enable the remote control server
          --rc-addr stringArray                IPaddress:Port or :Port to bind server to (default localhost:5572)
          --rc-allow-origin string             Origin which cross-domain request (CORS) can be executed from
          --rc-baseurl string                  Prefix for URLs - leave blank for root
          --rc-cert string                     TLS PEM key (concatenation of certificate and CA certificate)
          --rc-client-ca string                Client certificate authority to verify clients with
          --rc-enable-metrics                  Enable the Prometheus metrics path at the remote control server
          --rc-files string                    Path to local files to serve on the HTTP server
          --rc-htpasswd string                 A htpasswd file - if not provided no authentication is done
          --rc-job-expire-duration Duration    Expire finished async jobs older than this value (default 1m0s)
          --rc-job-expire-interval Duration    Interval to check for expired async jobs (default 10s)
          --rc-key string                      TLS PEM Private key
          --rc-max-header-bytes int            Maximum size of request header (default 4096)
          --rc-min-tls-version string          Minimum TLS version that is acceptable (default "tls1.0")
          --rc-no-auth                         Don't require auth for certain methods
          --rc-pass string                     Password for authentication
          --rc-realm string                    Realm for authentication
          --rc-salt string                     Password hashing salt (default "dlPL2MqE")
          --rc-serve                           Enable the serving of remote objects
          --rc-serve-no-modtime                Don't read the modification time (can speed things up)
          --rc-server-read-timeout Duration    Timeout for server reading data (default 1h0m0s)
          --rc-server-write-timeout Duration   Timeout for server writing data (default 1h0m0s)
          --rc-template string                 User-specified template
          --rc-user string                     User name for authentication
          --rc-user-from-header string         User name from a defined HTTP header
          --rc-web-fetch-url string            URL to fetch the releases for webgui (default "https://api.github.com/repos/rclone/rclone-webui-react/releases/latest")
          --rc-web-gui                         Launch WebGUI on localhost
          --rc-web-gui-force-update            Force update to latest version of web gui
          --rc-web-gui-no-open-browser         Don't open the browser automatically
          --rc-web-gui-update                  Check and update to latest version of web gui

Metrics

Flags to control the Metrics HTTP endpoint..

          --metrics-addr stringArray                IPaddress:Port or :Port to bind server to
          --metrics-allow-origin string             Origin which cross-domain request (CORS) can be executed from
          --metrics-baseurl string                  Prefix for URLs - leave blank for root
          --metrics-cert string                     TLS PEM key (concatenation of certificate and CA certificate)
          --metrics-client-ca string                Client certificate authority to verify clients with
          --metrics-htpasswd string                 A htpasswd file - if not provided no authentication is done
          --metrics-key string                      TLS PEM Private key
          --metrics-max-header-bytes int            Maximum size of request header (default 4096)
          --metrics-min-tls-version string          Minimum TLS version that is acceptable (default "tls1.0")
          --metrics-pass string                     Password for authentication
          --metrics-realm string                    Realm for authentication
          --metrics-salt string                     Password hashing salt (default "dlPL2MqE")
          --metrics-server-read-timeout Duration    Timeout for server reading data (default 1h0m0s)
          --metrics-server-write-timeout Duration   Timeout for server writing data (default 1h0m0s)
          --metrics-template string                 User-specified template
          --metrics-user string                     User name for authentication
          --metrics-user-from-header string         User name from a defined HTTP header
          --rc-enable-metrics                       Enable the Prometheus metrics path at the remote control server

Backend

Backend-only flags (these can be set in the config file also).

          --alias-description string                            Description of the remote
          --alias-remote string                                 Remote or path to alias
          --archive-description string                          Description of the remote
          --archive-remote string                               Remote to wrap to read archives from
          --azureblob-access-tier string                        Access tier of blob: hot, cool, cold or archive
          --azureblob-account string                            Azure Storage Account Name
          --azureblob-archive-tier-delete                       Delete archive tier blobs before overwriting
          --azureblob-chunk-size SizeSuffix                     Upload chunk size (default 4Mi)
          --azureblob-client-certificate-password string        Password for the certificate file (optional) (obscured)
          --azureblob-client-certificate-path string            Path to a PEM or PKCS12 certificate file including the private key
          --azureblob-client-id string                          The ID of the client in use
          --azureblob-client-secret string                      One of the service principal's client secrets
          --azureblob-client-send-certificate-chain             Send the certificate chain when using certificate auth
          --azureblob-connection-string string                  Storage Connection String
          --azureblob-copy-concurrency int                      Concurrency for multipart copy (default 512)
          --azureblob-copy-cutoff SizeSuffix                    Cutoff for switching to multipart copy (default 8Mi)
          --azureblob-copy-total-concurrency int                Global concurrency limit for multipart copy chunks
          --azureblob-decompress                                If set this will decompress gzip encoded objects
          --azureblob-delete-snapshots string                   Set to specify how to deal with snapshots on blob deletion
          --azureblob-description string                        Description of the remote
          --azureblob-directory-markers                         Upload an empty object with a trailing slash when a new directory is created
          --azureblob-disable-checksum                          Don't store MD5 checksum with object metadata
          --azureblob-disable-instance-discovery                Skip requesting Microsoft Entra instance metadata
          --azureblob-encoding Encoding                         The encoding for the backend (default Slash,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8)
          --azureblob-endpoint string                           Endpoint for the service
          --azureblob-env-auth                                  Read credentials from runtime (environment variables, CLI or MSI)
          --azureblob-key string                                Storage Account Shared Key
          --azureblob-list-chunk int                            Size of blob list (default 5000)
          --azureblob-msi-client-id string                      Object ID of the user-assigned MSI to use, if any
          --azureblob-msi-mi-res-id string                      Azure resource ID of the user-assigned MSI to use, if any
          --azureblob-msi-object-id string                      Object ID of the user-assigned MSI to use, if any
          --azureblob-no-check-container                        If set, don't attempt to check the container exists or create it
          --azureblob-no-head-object                            If set, do not do HEAD before GET when getting objects
          --azureblob-password string                           The user's password (obscured)
          --azureblob-public-access string                      Public access level of a container: blob or container
          --azureblob-sas-url string                            SAS URL for container level access only
          --azureblob-service-principal-file string             Path to file containing credentials for use with a service principal
          --azureblob-tenant string                             ID of the service principal's tenant. Also called its directory ID
          --azureblob-upload-concurrency int                    Concurrency for multipart uploads (default 16)
          --azureblob-upload-cutoff string                      Cutoff for switching to chunked upload (<= 256 MiB) (deprecated)
          --azureblob-use-az                                    Use Azure CLI tool az for authentication
          --azureblob-use-copy-blob                             Whether to use the Copy Blob API when copying to the same storage account (default true)
          --azureblob-use-emulator                              Uses local storage emulator if provided as 'true'
          --azureblob-use-msi                                   Use a managed service identity to authenticate (only works in Azure)
          --azureblob-username string                           User name (usually an email address)
          --azurefiles-account string                           Azure Storage Account Name
          --azurefiles-chunk-size SizeSuffix                    Upload chunk size (default 4Mi)
          --azurefiles-client-certificate-password string       Password for the certificate file (optional) (obscured)
          --azurefiles-client-certificate-path string           Path to a PEM or PKCS12 certificate file including the private key
          --azurefiles-client-id string                         The ID of the client in use
          --azurefiles-client-secret string                     One of the service principal's client secrets
          --azurefiles-client-send-certificate-chain            Send the certificate chain when using certificate auth
          --azurefiles-connection-string string                 Storage Connection String
          --azurefiles-description string                       Description of the remote
          --azurefiles-disable-instance-discovery               Skip requesting Microsoft Entra instance metadata
          --azurefiles-encoding Encoding                        The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8,Dot)
          --azurefiles-endpoint string                          Endpoint for the service
          --azurefiles-env-auth                                 Read credentials from runtime (environment variables, CLI or MSI)
          --azurefiles-key string                               Storage Account Shared Key
          --azurefiles-max-stream-size SizeSuffix               Max size for streamed files (default 10Gi)
          --azurefiles-msi-client-id string                     Object ID of the user-assigned MSI to use, if any
          --azurefiles-msi-mi-res-id string                     Azure resource ID of the user-assigned MSI to use, if any
          --azurefiles-msi-object-id string                     Object ID of the user-assigned MSI to use, if any
          --azurefiles-password string                          The user's password (obscured)
          --azurefiles-sas-url string                           SAS URL for container level access only
          --azurefiles-service-principal-file string            Path to file containing credentials for use with a service principal
          --azurefiles-share-name string                        Azure Files Share Name
          --azurefiles-tenant string                            ID of the service principal's tenant. Also called its directory ID
          --azurefiles-upload-concurrency int                   Concurrency for multipart uploads (default 16)
          --azurefiles-use-az                                   Use Azure CLI tool az for authentication
          --azurefiles-use-emulator                             Uses local storage emulator if provided as 'true'
          --azurefiles-use-msi                                  Use a managed service identity to authenticate (only works in Azure)
          --azurefiles-username string                          User name (usually an email address)
          --b2-account string                                   Account ID or Application Key ID
          --b2-chunk-size SizeSuffix                            Upload chunk size (default 96Mi)
          --b2-copy-cutoff SizeSuffix                           Cutoff for switching to multipart copy (default 4Gi)
          --b2-description string                               Description of the remote
          --b2-disable-checksum                                 Disable checksums for large (> upload cutoff) files
          --b2-download-auth-duration Duration                  Time before the public link authorization token will expire in s or suffix ms|s|m|h|d (default 1w)
          --b2-download-url string                              Custom endpoint for downloads
          --b2-encoding Encoding                                The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --b2-endpoint string                                  Endpoint for the service
          --b2-hard-delete                                      Permanently delete files on remote removal, otherwise hide files
          --b2-key string                                       Application Key
          --b2-lifecycle int                                    Set the number of days deleted files should be kept when creating a bucket
          --b2-sse-customer-algorithm string                    If using SSE-C, the server-side encryption algorithm used when storing this object in B2
          --b2-sse-customer-key string                          To use SSE-C, you may provide the secret encryption key encoded in a UTF-8 compatible string to encrypt/decrypt your data
          --b2-sse-customer-key-base64 string                   To use SSE-C, you may provide the secret encryption key encoded in Base64 format to encrypt/decrypt your data
          --b2-sse-customer-key-md5 string                      If using SSE-C you may provide the secret encryption key MD5 checksum (optional)
          --b2-test-mode string                                 A flag string for X-Bz-Test-Mode header for debugging
          --b2-upload-concurrency int                           Concurrency for multipart uploads (default 4)
          --b2-upload-cutoff SizeSuffix                         Cutoff for switching to chunked upload (default 200Mi)
          --b2-version-at Time                                  Show file versions as they were at the specified time (default off)
          --b2-versions                                         Include old versions in directory listings
          --box-access-token string                             Box App Primary Access Token
          --box-auth-url string                                 Auth server URL
          --box-box-config-file string                          Box App config.json location
          --box-box-sub-type string                              (default "user")
          --box-client-credentials                              Use client credentials OAuth flow
          --box-client-id string                                OAuth Client Id
          --box-client-secret string                            OAuth Client Secret
          --box-commit-retries int                              Max number of times to try committing a multipart file (default 100)
          --box-description string                              Description of the remote
          --box-encoding Encoding                               The encoding for the backend (default Slash,BackSlash,Del,Ctl,RightSpace,InvalidUtf8,Dot)
          --box-impersonate string                              Impersonate this user ID when using a service account
          --box-list-chunk int                                  Size of listing chunk 1-1000 (default 1000)
          --box-owned-by string                                 Only show items owned by the login (email address) passed in
          --box-root-folder-id string                           Fill in for rclone to use a non root folder as its starting point
          --box-token string                                    OAuth Access Token as a JSON blob
          --box-token-url string                                Token server url
          --box-upload-cutoff SizeSuffix                        Cutoff for switching to multipart upload (>= 50 MiB) (default 50Mi)
          --cache-chunk-clean-interval Duration                 How often should the cache perform cleanups of the chunk storage (default 1m0s)
          --cache-chunk-no-memory                               Disable the in-memory cache for storing chunks during streaming
          --cache-chunk-path string                             Directory to cache chunk files (default "$HOME/.cache/rclone/cache-backend")
          --cache-chunk-size SizeSuffix                         The size of a chunk (partial file data) (default 5Mi)
          --cache-chunk-total-size SizeSuffix                   The total size that the chunks can take up on the local disk (default 10Gi)
          --cache-db-path string                                Directory to store file structure metadata DB (default "$HOME/.cache/rclone/cache-backend")
          --cache-db-purge                                      Clear all the cached data for this remote on start
          --cache-db-wait-time Duration                         How long to wait for the DB to be available - 0 is unlimited (default 1s)
          --cache-description string                            Description of the remote
          --cache-info-age Duration                             How long to cache file structure information (directory listings, file size, times, etc.) (default 6h0m0s)
          --cache-plex-insecure string                          Skip all certificate verification when connecting to the Plex server
          --cache-plex-password string                          The password of the Plex user (obscured)
          --cache-plex-url string                               The URL of the Plex server
          --cache-plex-username string                          The username of the Plex user
          --cache-read-retries int                              How many times to retry a read from a cache storage (default 10)
          --cache-remote string                                 Remote to cache
          --cache-rps int                                       Limits the number of requests per second to the source FS (-1 to disable) (default -1)
          --cache-tmp-upload-path string                        Directory to keep temporary files until they are uploaded
          --cache-tmp-wait-time Duration                        How long should files be stored in local cache before being uploaded (default 15s)
          --cache-workers int                                   How many workers should run in parallel to download chunks (default 4)
          --cache-writes                                        Cache file data on writes through the FS
          --chunker-chunk-size SizeSuffix                       Files larger than chunk size will be split in chunks (default 2Gi)
          --chunker-description string                          Description of the remote
          --chunker-fail-hard                                   Choose how chunker should handle files with missing or invalid chunks
          --chunker-hash-type string                            Choose how chunker handles hash sums (default "md5")
          --chunker-remote string                               Remote to chunk/unchunk
          --cloudinary-adjust-media-files-extensions            Cloudinary handles media formats as a file attribute and strips it from the name, which is unlike most other file systems (default true)
          --cloudinary-api-key string                           Cloudinary API Key
          --cloudinary-api-secret string                        Cloudinary API Secret
          --cloudinary-cloud-name string                        Cloudinary Environment Name
          --cloudinary-description string                       Description of the remote
          --cloudinary-encoding Encoding                        The encoding for the backend (default Slash,LtGt,DoubleQuote,Question,Asterisk,Pipe,Hash,Percent,BackSlash,Del,Ctl,RightSpace,InvalidUtf8,Dot)
          --cloudinary-eventually-consistent-delay Duration     Wait N seconds for eventual consistency of the databases that support the backend operation (default 0s)
          --cloudinary-media-extensions stringArray             Cloudinary supported media extensions (default 3ds,3g2,3gp,ai,arw,avi,avif,bmp,bw,cr2,cr3,djvu,dng,eps3,fbx,flif,flv,gif,glb,gltf,hdp,heic,heif,ico,indd,jp2,jpe,jpeg,jpg,jxl,jxr,m2ts,mov,mp4,mpeg,mts,mxf,obj,ogv,pdf,ply,png,psd,svg,tga,tif,tiff,ts,u3ma,usdz,wdp,webm,webp,wmv)
          --cloudinary-upload-prefix string                     Specify the API endpoint for environments out of the US
          --cloudinary-upload-preset string                     Upload Preset to select asset manipulation on upload
          --combine-description string                          Description of the remote
          --combine-upstreams SpaceSepList                      Upstreams for combining
          --compress-description string                         Description of the remote
          --compress-level string                               GZIP (levels -2 to 9):
          --compress-mode string                                Compression mode (default "gzip")
          --compress-ram-cache-limit SizeSuffix                 Some remotes don't allow the upload of files with unknown size (default 20Mi)
          --compress-remote string                              Remote to compress
      -L, --copy-links                                          Follow symlinks and copy the pointed to item
          --crypt-description string                            Description of the remote
          --crypt-directory-name-encryption                     Option to either encrypt directory names or leave them intact (default true)
          --crypt-filename-encoding string                      How to encode the encrypted filename to text string (default "base32")
          --crypt-filename-encryption string                    How to encrypt the filenames (default "standard")
          --crypt-no-data-encryption                            Option to either encrypt file data or leave it unencrypted
          --crypt-pass-bad-blocks                               If set this will pass bad blocks through as all 0
          --crypt-password string                               Password or pass phrase for encryption (obscured)
          --crypt-password2 string                              Password or pass phrase for salt (obscured)
          --crypt-remote string                                 Remote to encrypt/decrypt
          --crypt-server-side-across-configs                    Deprecated: use --server-side-across-configs instead
          --crypt-show-mapping                                  For all files listed show how the names encrypt
          --crypt-strict-names                                  If set, this will raise an error when crypt comes across a filename that can't be decrypted
          --crypt-suffix string                                 If this is set it will override the default suffix of ".bin" (default ".bin")
          --doi-description string                              Description of the remote
          --doi-doi string                                      The DOI or the doi.org URL
          --doi-doi-resolver-api-url string                     The URL of the DOI resolver API to use
          --doi-provider string                                 DOI provider
          --drime-access-token string                           API Access token
          --drime-chunk-size SizeSuffix                         Chunk size to use for uploading (default 5Mi)
          --drime-description string                            Description of the remote
          --drime-encoding Encoding                             The encoding for the backend (default Slash,BackSlash,Del,Ctl,LeftSpace,RightSpace,InvalidUtf8,Dot)
          --drime-hard-delete                                   Delete files permanently rather than putting them into the trash
          --drime-list-chunk int                                Number of items to list in each call (default 1000)
          --drime-root-folder-id string                         ID of the root folder
          --drime-upload-concurrency int                        Concurrency for multipart uploads and copies (default 4)
          --drime-upload-cutoff SizeSuffix                      Cutoff for switching to chunked upload (default 5Mi)
          --drime-workspace-id string                           Account ID
          --drive-acknowledge-abuse                             Set to allow files which return cannotDownloadAbusiveFile to be downloaded
          --drive-allow-import-name-change                      Allow the filetype to change when uploading Google docs
          --drive-auth-owner-only                               Only consider files owned by the authenticated user
          --drive-auth-url string                               Auth server URL
          --drive-chunk-size SizeSuffix                         Upload chunk size (default 8Mi)
          --drive-client-credentials                            Use client credentials OAuth flow
          --drive-client-id string                              Google Application Client Id
          --drive-client-secret string                          OAuth Client Secret
          --drive-copy-shortcut-content                         Server side copy contents of shortcuts instead of the shortcut
          --drive-description string                            Description of the remote
          --drive-disable-http2                                 Disable drive using http2 (default true)
          --drive-encoding Encoding                             The encoding for the backend (default InvalidUtf8)
          --drive-env-auth                                      Get IAM credentials from runtime (environment variables or instance meta data if no env vars)
          --drive-export-formats string                         Comma separated list of preferred formats for downloading Google docs (default "docx,xlsx,pptx,svg")
          --drive-fast-list-bug-fix                             Work around a bug in Google Drive listing (default true)
          --drive-formats string                                Deprecated: See export_formats
          --drive-impersonate string                            Impersonate this user when using a service account
          --drive-import-formats string                         Comma separated list of preferred formats for uploading Google docs
          --drive-keep-revision-forever                         Keep new head revision of each file forever
          --drive-list-chunk int                                Size of listing chunk 100-1000, 0 to disable (default 1000)
          --drive-metadata-enforce-expansive-access             Whether the request should enforce expansive access rules
          --drive-metadata-labels Bits                          Control whether labels should be read or written in metadata (default off)
          --drive-metadata-owner Bits                           Control whether owner should be read or written in metadata (default read)
          --drive-metadata-permissions Bits                     Control whether permissions should be read or written in metadata (default off)
          --drive-pacer-burst int                               Number of API calls to allow without sleeping (default 100)
          --drive-pacer-min-sleep Duration                      Minimum time to sleep between API calls (default 100ms)
          --drive-resource-key string                           Resource key for accessing a link-shared file
          --drive-root-folder-id string                         ID of the root folder
          --drive-scope string                                  Comma separated list of scopes that rclone should use when requesting access from drive
          --drive-server-side-across-configs                    Deprecated: use --server-side-across-configs instead
          --drive-service-account-credentials string            Service Account Credentials JSON blob
          --drive-service-account-file string                   Service Account Credentials JSON file path
          --drive-shared-with-me                                Only show files that are shared with me
          --drive-show-all-gdocs                                Show all Google Docs including non-exportable ones in listings
          --drive-size-as-quota                                 Show sizes as storage quota usage, not actual size
          --drive-skip-checksum-gphotos                         Skip checksums on Google photos and videos only
          --drive-skip-dangling-shortcuts                       If set skip dangling shortcut files
          --drive-skip-gdocs                                    Skip google documents in all listings
          --drive-skip-shortcuts                                If set skip shortcut files
          --drive-starred-only                                  Only show files that are starred
          --drive-stop-on-download-limit                        Make download limit errors be fatal
          --drive-stop-on-upload-limit                          Make upload limit errors be fatal
          --drive-team-drive string                             ID of the Shared Drive (Team Drive)
          --drive-token string                                  OAuth Access Token as a JSON blob
          --drive-token-url string                              Token server url
          --drive-trashed-only                                  Only show files that are in the trash
          --drive-upload-cutoff SizeSuffix                      Cutoff for switching to chunked upload (default 8Mi)
          --drive-use-created-date                              Use file created date instead of modified date
          --drive-use-shared-date                               Use date file was shared instead of modified date
          --drive-use-trash                                     Send files to the trash instead of deleting permanently (default true)
          --drive-v2-download-min-size SizeSuffix               If Object's are greater, use drive v2 API to download (default off)
          --dropbox-auth-url string                             Auth server URL
          --dropbox-batch-mode string                           Upload file batching sync|async|off (default "sync")
          --dropbox-batch-size int                              Max number of files in upload batch
          --dropbox-batch-timeout Duration                      Max time to allow an idle upload batch before uploading (default 0s)
          --dropbox-chunk-size SizeSuffix                       Upload chunk size (< 150Mi) (default 48Mi)
          --dropbox-client-credentials                          Use client credentials OAuth flow
          --dropbox-client-id string                            OAuth Client Id
          --dropbox-client-secret string                        OAuth Client Secret
          --dropbox-description string                          Description of the remote
          --dropbox-encoding Encoding                           The encoding for the backend (default Slash,BackSlash,Del,RightSpace,InvalidUtf8,Dot)
          --dropbox-export-formats CommaSepList                 Comma separated list of preferred formats for exporting files (default html,md)
          --dropbox-impersonate string                          Impersonate this user when using a business account
          --dropbox-pacer-min-sleep Duration                    Minimum time to sleep between API calls (default 10ms)
          --dropbox-root-namespace string                       Specify a different Dropbox namespace ID to use as the root for all paths
          --dropbox-shared-files                                Instructs rclone to work on individual shared files
          --dropbox-shared-folders                              Instructs rclone to work on shared folders
          --dropbox-show-all-exports                            Show all exportable files in listings
          --dropbox-skip-exports                                Skip exportable files in all listings
          --dropbox-token string                                OAuth Access Token as a JSON blob
          --dropbox-token-url string                            Token server url
          --fichier-api-key string                              Your API Key, get it from https://1fichier.com/console/params.pl
          --fichier-cdn                                         Set if you wish to use CDN download links
          --fichier-description string                          Description of the remote
          --fichier-encoding Encoding                           The encoding for the backend (default Slash,LtGt,DoubleQuote,SingleQuote,BackQuote,Dollar,BackSlash,Del,Ctl,LeftSpace,RightSpace,InvalidUtf8,Dot)
          --fichier-file-password string                        If you want to download a shared file that is password protected, add this parameter (obscured)
          --fichier-folder-password string                      If you want to list the files in a shared folder that is password protected, add this parameter (obscured)
          --fichier-shared-folder string                        If you want to download a shared folder, add this parameter
          --filefabric-description string                       Description of the remote
          --filefabric-encoding Encoding                        The encoding for the backend (default Slash,Del,Ctl,InvalidUtf8,Dot)
          --filefabric-permanent-token string                   Permanent Authentication Token
          --filefabric-root-folder-id string                    ID of the root folder
          --filefabric-token string                             Session Token
          --filefabric-token-expiry string                      Token expiry time
          --filefabric-url string                               URL of the Enterprise File Fabric to connect to
          --filefabric-version string                           Version read from the file fabric
          --filelu-chunk-size SizeSuffix                        Chunk size to use for uploading. Used for multipart uploads (default 64Mi)
          --filelu-description string                           Description of the remote
          --filelu-encoding Encoding                            The encoding for the backend (default Slash,LtGt,DoubleQuote,SingleQuote,BackQuote,Dollar,Colon,Question,Asterisk,Pipe,Hash,Percent,BackSlash,CrLf,Del,Ctl,LeftSpace,LeftPeriod,LeftTilde,LeftCrLfHtVt,RightSpace,RightPeriod,RightCrLfHtVt,InvalidUtf8,Dot,SquareBracket,Semicolon,Exclamation)
          --filelu-key string                                   Your FileLu Rclone key from My Account
          --filelu-upload-cutoff SizeSuffix                     Cutoff for switching to chunked upload. Any files larger than this will be uploaded in chunks of chunk_size (default 500Mi)
          --filen-api-key string                                API Key for your Filen account (obscured)
          --filen-auth-version string                           Authentication Version (internal use only)
          --filen-base-folder-uuid string                       UUID of Account Root Directory (internal use only)
          --filen-description string                            Description of the remote
          --filen-email string                                  Email of your Filen account
          --filen-encoding Encoding                             The encoding for the backend (default Slash,Del,Ctl,InvalidUtf8,Dot)
          --filen-master-keys string                            Master Keys (internal use only)
          --filen-password string                               Password of your Filen account (obscured)
          --filen-private-key string                            Private RSA Key (internal use only)
          --filen-public-key string                             Public RSA Key (internal use only)
          --filen-upload-concurrency int                        Concurrency for chunked uploads (default 16)
          --filescom-api-key string                             The API key used to authenticate with Files.com
          --filescom-description string                         Description of the remote
          --filescom-encoding Encoding                          The encoding for the backend (default Slash,BackSlash,Del,Ctl,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot)
          --filescom-password string                            The password used to authenticate with Files.com (obscured)
          --filescom-site string                                Your site subdomain (e.g. mysite) or custom domain (e.g. myfiles.customdomain.com)
          --filescom-username string                            The username used to authenticate with Files.com
          --ftp-allow-insecure-tls-ciphers                      Allow insecure TLS ciphers
          --ftp-ask-password                                    Allow asking for FTP password when needed
          --ftp-close-timeout Duration                          Maximum time to wait for a response to close (default 1m0s)
          --ftp-concurrency int                                 Maximum number of FTP simultaneous connections, 0 for unlimited
          --ftp-description string                              Description of the remote
          --ftp-disable-epsv                                    Disable using EPSV even if server advertises support
          --ftp-disable-mlsd                                    Disable using MLSD even if server advertises support
          --ftp-disable-tls13                                   Disable TLS 1.3 (workaround for FTP servers with buggy TLS)
          --ftp-disable-utf8                                    Disable using UTF-8 even if server advertises support
          --ftp-encoding Encoding                               The encoding for the backend (default Slash,Del,Ctl,RightSpace,Dot)
          --ftp-explicit-tls                                    Use Explicit FTPS (FTP over TLS)
          --ftp-force-list-hidden                               Use LIST -a to force listing of hidden files and folders. This will disable the use of MLSD
          --ftp-host string                                     FTP host to connect to
          --ftp-http-proxy string                               URL for HTTP CONNECT proxy
          --ftp-idle-timeout Duration                           Max time before closing idle connections (default 1m0s)
          --ftp-no-check-certificate                            Do not verify the TLS certificate of the server
          --ftp-no-check-upload                                 Don't check the upload is OK
          --ftp-pass string                                     FTP password (obscured)
          --ftp-port int                                        FTP port number (default 21)
          --ftp-shut-timeout Duration                           Maximum time to wait for data connection closing status (default 1m0s)
          --ftp-socks-proxy string                              Socks 5 proxy host
          --ftp-tls                                             Use Implicit FTPS (FTP over TLS)
          --ftp-tls-cache-size int                              Size of TLS session cache for all control and data connections (default 32)
          --ftp-user string                                     FTP username (default "$USER")
          --ftp-writing-mdtm                                    Use MDTM to set modification time (VsFtpd quirk)
          --gcs-access-token string                             Short-lived access token
          --gcs-anonymous                                       Access public buckets and objects without credentials
          --gcs-auth-url string                                 Auth server URL
          --gcs-bucket-acl string                               Access Control List for new buckets
          --gcs-bucket-policy-only                              Access checks should use bucket-level IAM policies
          --gcs-client-credentials                              Use client credentials OAuth flow
          --gcs-client-id string                                OAuth Client Id
          --gcs-client-secret string                            OAuth Client Secret
          --gcs-decompress                                      If set this will decompress gzip encoded objects
          --gcs-description string                              Description of the remote
          --gcs-directory-markers                               Upload an empty object with a trailing slash when a new directory is created
          --gcs-encoding Encoding                               The encoding for the backend (default Slash,CrLf,InvalidUtf8,Dot)
          --gcs-endpoint string                                 Custom endpoint for the storage API. Leave blank to use the provider default
          --gcs-env-auth                                        Get GCP IAM credentials from runtime (environment variables or instance meta data if no env vars)
          --gcs-location string                                 Location for the newly created buckets
          --gcs-no-check-bucket                                 If set, don't attempt to check the bucket exists or create it
          --gcs-object-acl string                               Access Control List for new objects
          --gcs-project-number string                           Project number
          --gcs-service-account-file string                     Service Account Credentials JSON file path
          --gcs-storage-class string                            The storage class to use when storing objects in Google Cloud Storage
          --gcs-token string                                    OAuth Access Token as a JSON blob
          --gcs-token-url string                                Token server url
          --gcs-user-project string                             User project
          --gofile-access-token string                          API Access token
          --gofile-account-id string                            Account ID
          --gofile-description string                           Description of the remote
          --gofile-encoding Encoding                            The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,LeftPeriod,RightPeriod,InvalidUtf8,Dot,Exclamation)
          --gofile-list-chunk int                               Number of items to list in each call (default 1000)
          --gofile-root-folder-id string                        ID of the root folder
          --gphotos-auth-url string                             Auth server URL
          --gphotos-batch-mode string                           Upload file batching sync|async|off (default "sync")
          --gphotos-batch-size int                              Max number of files in upload batch
          --gphotos-batch-timeout Duration                      Max time to allow an idle upload batch before uploading (default 0s)
          --gphotos-client-credentials                          Use client credentials OAuth flow
          --gphotos-client-id string                            OAuth Client Id
          --gphotos-client-secret string                        OAuth Client Secret
          --gphotos-description string                          Description of the remote
          --gphotos-encoding Encoding                           The encoding for the backend (default Slash,CrLf,InvalidUtf8,Dot)
          --gphotos-include-archived                            Also view and download archived media
          --gphotos-proxy string                                Use the gphotosdl proxy for downloading the full resolution images
          --gphotos-read-only                                   Set to make the Google Photos backend read only
          --gphotos-read-size                                   Set to read the size of media items
          --gphotos-start-year int                              Year limits the photos to be downloaded to those which are uploaded after the given year (default 2000)
          --gphotos-token string                                OAuth Access Token as a JSON blob
          --gphotos-token-url string                            Token server url
          --hasher-auto-size SizeSuffix                         Auto-update checksum for files smaller than this size (disabled by default)
          --hasher-description string                           Description of the remote
          --hasher-hashes CommaSepList                          Comma separated list of supported checksum types (default md5,sha1)
          --hasher-max-age Duration                             Maximum time to keep checksums in cache (0 = no cache, off = cache forever) (default off)
          --hasher-remote string                                Remote to cache checksums for (e.g. myRemote:path)
          --hdfs-data-transfer-protection string                Kerberos data transfer protection: authentication|integrity|privacy
          --hdfs-description string                             Description of the remote
          --hdfs-encoding Encoding                              The encoding for the backend (default Slash,Colon,Del,Ctl,InvalidUtf8,Dot)
          --hdfs-namenode CommaSepList                          Hadoop name nodes and ports
          --hdfs-service-principal-name string                  Kerberos service principal name for the namenode
          --hdfs-username string                                Hadoop user name
          --hidrive-auth-url string                             Auth server URL
          --hidrive-chunk-size SizeSuffix                       Chunksize for chunked uploads (default 48Mi)
          --hidrive-client-credentials                          Use client credentials OAuth flow
          --hidrive-client-id string                            OAuth Client Id
          --hidrive-client-secret string                        OAuth Client Secret
          --hidrive-description string                          Description of the remote
          --hidrive-disable-fetching-member-count               Do not fetch number of objects in directories unless it is absolutely necessary
          --hidrive-encoding Encoding                           The encoding for the backend (default Slash,Dot)
          --hidrive-endpoint string                             Endpoint for the service (default "https://api.hidrive.strato.com/2.1")
          --hidrive-root-prefix string                          The root/parent folder for all paths (default "/")
          --hidrive-scope-access string                         Access permissions that rclone should use when requesting access from HiDrive (default "rw")
          --hidrive-scope-role string                           User-level that rclone should use when requesting access from HiDrive (default "user")
          --hidrive-token string                                OAuth Access Token as a JSON blob
          --hidrive-token-url string                            Token server url
          --hidrive-upload-concurrency int                      Concurrency for chunked uploads (default 4)
          --hidrive-upload-cutoff SizeSuffix                    Cutoff/Threshold for chunked uploads (default 96Mi)
          --http-description string                             Description of the remote
          --http-headers CommaSepList                           Set HTTP headers for all transactions
          --http-no-escape                                      Do not escape URL metacharacters in path names
          --http-no-head                                        Don't use HEAD requests
          --http-no-slash                                       Set this if the site doesn't end directories with /
          --http-url string                                     URL of HTTP host to connect to
          --huaweidrive-auth-url string                         Auth server URL
          --huaweidrive-chunk-size SizeSuffix                   Upload chunk size (default 8Mi)
          --huaweidrive-client-credentials                      Use client credentials OAuth flow
          --huaweidrive-client-id string                        OAuth Client Id
          --huaweidrive-client-secret string                    OAuth Client Secret
          --huaweidrive-description string                      Description of the remote
          --huaweidrive-encoding Encoding                       The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,LeftSpace,LeftPeriod,LeftTilde,RightSpace,RightPeriod,InvalidUtf8,Dot)
          --huaweidrive-list-chunk int                          Size of listing chunk 1-1000 (default 1000)
          --huaweidrive-root-folder-id string                   ID of the root folder
          --huaweidrive-token string                            OAuth Access Token as a JSON blob
          --huaweidrive-token-url string                        Token server url
          --huaweidrive-upload-cutoff SizeSuffix                Cutoff for switching to resumable upload (default 20Mi)
          --iclouddrive-apple-id string                         Apple ID
          --iclouddrive-client-id string                        Client ID for iCloud API access (default "d39ba9916b7251055b22c7f910e2ea796ee65e98b2ddecea8f5dde8d9d1a815d")
          --iclouddrive-description string                      Description of the remote
          --iclouddrive-encoding Encoding                       The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --iclouddrive-password string                         Password (obscured)
          --iclouddrive-service string                          iCloud service to use (default "drive")
          --imagekit-description string                         Description of the remote
          --imagekit-encoding Encoding                          The encoding for the backend (default Slash,LtGt,DoubleQuote,Dollar,Question,Hash,Percent,BackSlash,Del,Ctl,InvalidUtf8,Dot,SquareBracket)
          --imagekit-endpoint string                            You can find your ImageKit.io URL endpoint in your [dashboard](https://imagekit.io/dashboard/developer/api-keys)
          --imagekit-only-signed Restrict unsigned image URLs   If you have configured Restrict unsigned image URLs in your dashboard settings, set this to true
          --imagekit-private-key string                         You can find your ImageKit.io private key in your [dashboard](https://imagekit.io/dashboard/developer/api-keys)
          --imagekit-public-key string                          You can find your ImageKit.io public key in your [dashboard](https://imagekit.io/dashboard/developer/api-keys)
          --imagekit-upload-tags string                         Tags to add to the uploaded files, e.g. "tag1,tag2"
          --imagekit-versions                                   Include old versions in directory listings
          --internetarchive-access-key-id string                IAS3 Access Key
          --internetarchive-description string                  Description of the remote
          --internetarchive-disable-checksum                    Don't ask the server to test against MD5 checksum calculated by rclone (default true)
          --internetarchive-encoding Encoding                   The encoding for the backend (default Slash,LtGt,CrLf,Del,Ctl,InvalidUtf8,Dot)
          --internetarchive-endpoint string                     IAS3 Endpoint (default "https://s3.us.archive.org")
          --internetarchive-front-endpoint string               Host of InternetArchive Frontend (default "https://archive.org")
          --internetarchive-item-derive                         Whether to trigger derive on the IA item or not. If set to false, the item will not be derived by IA upon upload (default true)
          --internetarchive-item-metadata stringArray           Metadata to be set on the IA item, this is different from file-level metadata that can be set using --metadata-set
          --internetarchive-secret-access-key string            IAS3 Secret Key (password)
          --internetarchive-wait-archive Duration               Timeout for waiting the server's processing tasks (specifically archive and book_op) to finish (default 0s)
          --internxt-chunk-size SizeSuffix                      Chunk size for multipart uploads (default 30Mi)
          --internxt-description string                         Description of the remote
          --internxt-email string                               Email of your Internxt account
          --internxt-encoding Encoding                          The encoding for the backend (default Slash,BackSlash,CrLf,RightPeriod,InvalidUtf8,Dot)
          --internxt-pass string                                Password (obscured)
          --internxt-skip-hash-validation                       Skip hash validation when downloading files (default true)
          --internxt-upload-concurrency int                     Concurrency for multipart uploads (default 4)
          --internxt-upload-cutoff SizeSuffix                   Cutoff for switching to multipart upload (default 100Mi)
          --jottacloud-auth-url string                          Auth server URL
          --jottacloud-client-credentials                       Use client credentials OAuth flow
          --jottacloud-client-id string                         OAuth Client Id
          --jottacloud-client-secret string                     OAuth Client Secret
          --jottacloud-description string                       Description of the remote
          --jottacloud-encoding Encoding                        The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,Percent,Del,Ctl,InvalidUtf8,Dot)
          --jottacloud-hard-delete                              Delete files permanently rather than putting them into the trash
          --jottacloud-md5-memory-limit SizeSuffix              Files bigger than this will be cached on disk to calculate the MD5 if required (default 10Mi)
          --jottacloud-no-versions                              Avoid server side versioning by deleting files and recreating files instead of overwriting them
          --jottacloud-token string                             OAuth Access Token as a JSON blob
          --jottacloud-token-url string                         Token server url
          --jottacloud-trashed-only                             Only show files that are in the trash
          --jottacloud-upload-resume-limit SizeSuffix           Files bigger than this can be resumed if the upload fail's (default 10Mi)
          --koofr-description string                            Description of the remote
          --koofr-encoding Encoding                             The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --koofr-endpoint string                               The Koofr API endpoint to use
          --koofr-mountid string                                Mount ID of the mount to use
          --koofr-password string                               Your password for rclone generate one at https://app.koofr.net/app/admin/preferences/password (obscured)
          --koofr-provider string                               Choose your storage provider
          --koofr-setmtime                                      Does the backend support setting modification time (default true)
          --koofr-user string                                   Your user name
          --linkbox-description string                          Description of the remote
          --linkbox-email string                                Email for login
          --linkbox-password string                             Password for login (obscured)
          --linkbox-token string                                Token from https://www.linkbox.to/admin/account
          --local-case-insensitive                              Force the filesystem to report itself as case insensitive
          --local-case-sensitive                                Force the filesystem to report itself as case sensitive
          --local-description string                            Description of the remote
          --local-encoding Encoding                             The encoding for the backend (default Slash,Dot)
          --local-hashes CommaSepList                           Comma separated list of supported checksum types
          --local-links                                         Translate symlinks to/from regular files with a '.rclonelink' extension for the local backend
          --local-no-check-updated                              Don't check to see if the files change during upload
          --local-no-clone                                      Disable reflink cloning for server-side copies
          --local-no-preallocate                                Disable preallocation of disk space for transferred files
          --local-no-set-modtime                                Disable setting modtime
          --local-no-sparse                                     Disable sparse files for multi-thread downloads
          --local-nounc                                         Disable UNC (long path names) conversion on Windows
          --local-time-type mtime|atime|btime|ctime             Set what kind of time is returned (default mtime)
          --local-unicode-normalization                         Apply unicode NFC normalization to paths and filenames
          --local-zero-size-links                               Assume the Stat size of links is zero (and read them instead) (deprecated)
          --mailru-auth-url string                              Auth server URL
          --mailru-check-hash                                   What should copy do if file checksum is mismatched or invalid (default true)
          --mailru-client-credentials                           Use client credentials OAuth flow
          --mailru-client-id string                             OAuth Client Id
          --mailru-client-secret string                         OAuth Client Secret
          --mailru-description string                           Description of the remote
          --mailru-encoding Encoding                            The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --mailru-pass string                                  Password (obscured)
          --mailru-speedup-enable                               Skip full upload if there is another file with same data hash (default true)
          --mailru-speedup-file-patterns string                 Comma separated list of file name patterns eligible for speedup (put by hash) (default "*.mkv,*.avi,*.mp4,*.mp3,*.zip,*.gz,*.rar,*.pdf")
          --mailru-speedup-max-disk SizeSuffix                  This option allows you to disable speedup (put by hash) for large files (default 3Gi)
          --mailru-speedup-max-memory SizeSuffix                Files larger than the size given below will always be hashed on disk (default 32Mi)
          --mailru-token string                                 OAuth Access Token as a JSON blob
          --mailru-token-url string                             Token server url
          --mailru-user string                                  User name (usually email)
          --mega-2fa string                                     The 2FA code of your MEGA account if the account is set up with one
          --mega-debug                                          Output more debug from Mega
          --mega-description string                             Description of the remote
          --mega-encoding Encoding                              The encoding for the backend (default Slash,InvalidUtf8,Dot)
          --mega-hard-delete                                    Delete files permanently rather than putting them into the trash
          --mega-pass string                                    Password (obscured)
          --mega-use-https                                      Use HTTPS for transfers
          --mega-user string                                    User name
          --memory-description string                           Description of the remote
          --memory-discard                                      If set all writes will be discarded and reads will return an error
          --netstorage-account string                           Set the NetStorage account name
          --netstorage-description string                       Description of the remote
          --netstorage-host string                              Domain+path of NetStorage host to connect to
          --netstorage-protocol string                          Select between HTTP or HTTPS protocol (default "https")
          --netstorage-secret string                            Set the NetStorage account secret/G2O key for authentication (obscured)
      -x, --one-file-system                                     Don't cross filesystem boundaries (unix/macOS only)
          --onedrive-access-scopes SpaceSepList                 Set scopes to be requested by rclone (default Files.Read Files.ReadWrite Files.Read.All Files.ReadWrite.All Sites.Read.All offline_access)
          --onedrive-auth-url string                            Auth server URL
          --onedrive-av-override                                Allows download of files the server thinks has a virus
          --onedrive-chunk-size SizeSuffix                      Chunk size to upload files with - must be multiple of 320k (327,680 bytes) (default 10Mi)
          --onedrive-client-credentials                         Use client credentials OAuth flow
          --onedrive-client-id string                           OAuth Client Id
          --onedrive-client-secret string                       OAuth Client Secret
          --onedrive-delta                                      If set rclone will use delta listing to implement recursive listings
          --onedrive-description string                         Description of the remote
          --onedrive-drive-id string                            The ID of the drive to use
          --onedrive-drive-type string                          The type of the drive (personal | business | documentLibrary)
          --onedrive-encoding Encoding                          The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,LeftSpace,LeftTilde,RightSpace,RightPeriod,InvalidUtf8,Dot)
          --onedrive-expose-onenote-files                       Set to make OneNote files show up in directory listings
          --onedrive-hard-delete                                Permanently delete files on removal
          --onedrive-hash-type string                           Specify the hash in use for the backend (default "auto")
          --onedrive-link-password string                       Set the password for links created by the link command
          --onedrive-link-scope string                          Set the scope of the links created by the link command (default "anonymous")
          --onedrive-link-type string                           Set the type of the links created by the link command (default "view")
          --onedrive-list-chunk int                             Size of listing chunk (default 1000)
          --onedrive-metadata-permissions Bits                  Control whether permissions should be read or written in metadata (default off)
          --onedrive-no-versions                                Remove all versions on modifying operations
          --onedrive-region string                              Choose national cloud region for OneDrive (default "global")
          --onedrive-root-folder-id string                      ID of the root folder
          --onedrive-server-side-across-configs                 Deprecated: use --server-side-across-configs instead
          --onedrive-tenant string                              ID of the service principal's tenant. Also called its directory ID
          --onedrive-token string                               OAuth Access Token as a JSON blob
          --onedrive-token-url string                           Token server url
          --onedrive-upload-cutoff SizeSuffix                   Cutoff for switching to chunked upload (default off)
          --oos-attempt-resume-upload                           If true attempt to resume previously started multipart upload for the object
          --oos-chunk-size SizeSuffix                           Chunk size to use for uploading (default 5Mi)
          --oos-compartment string                              Specify compartment OCID, if you need to list buckets
          --oos-config-file string                              Path to OCI config file (default "~/.oci/config")
          --oos-config-profile string                           Profile name inside the oci config file (default "Default")
          --oos-copy-cutoff SizeSuffix                          Cutoff for switching to multipart copy (default 4.656Gi)
          --oos-copy-timeout Duration                           Timeout for copy (default 1m0s)
          --oos-description string                              Description of the remote
          --oos-disable-checksum                                Don't store MD5 checksum with object metadata
          --oos-encoding Encoding                               The encoding for the backend (default Slash,InvalidUtf8,Dot)
          --oos-endpoint string                                 Endpoint for Object storage API
          --oos-leave-parts-on-error                            If true avoid calling abort upload on a failure, leaving all successfully uploaded parts for manual recovery
          --oos-max-upload-parts int                            Maximum number of parts in a multipart upload (default 10000)
          --oos-namespace string                                Object storage namespace
          --oos-no-check-bucket                                 If set, don't attempt to check the bucket exists or create it
          --oos-provider string                                 Choose your Auth Provider (default "env_auth")
          --oos-region string                                   Object storage Region
          --oos-sse-customer-algorithm string                   If using SSE-C, the optional header that specifies "AES256" as the encryption algorithm
          --oos-sse-customer-key string                         To use SSE-C, the optional header that specifies the base64-encoded 256-bit encryption key to use to
          --oos-sse-customer-key-file string                    To use SSE-C, a file containing the base64-encoded string of the AES-256 encryption key associated
          --oos-sse-customer-key-sha256 string                  If using SSE-C, The optional header that specifies the base64-encoded SHA256 hash of the encryption
          --oos-sse-kms-key-id string                           if using your own master key in vault, this header specifies the
          --oos-storage-tier string                             The storage class to use when storing new objects in storage. https://docs.oracle.com/en-us/iaas/Content/Object/Concepts/understandingstoragetiers.htm (default "Standard")
          --oos-upload-concurrency int                          Concurrency for multipart uploads (default 10)
          --oos-upload-cutoff SizeSuffix                        Cutoff for switching to chunked upload (default 200Mi)
          --opendrive-access string                             Files and folders will be uploaded with this access permission (default private) (default "private")
          --opendrive-chunk-size SizeSuffix                     Files will be uploaded in chunks this size (default 10Mi)
          --opendrive-description string                        Description of the remote
          --opendrive-encoding Encoding                         The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot)
          --opendrive-password string                           Password (obscured)
          --opendrive-username string                           Username
          --pcloud-auth-url string                              Auth server URL
          --pcloud-client-credentials                           Use client credentials OAuth flow
          --pcloud-client-id string                             OAuth Client Id
          --pcloud-client-secret string                         OAuth Client Secret
          --pcloud-description string                           Description of the remote
          --pcloud-encoding Encoding                            The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --pcloud-hostname string                              Hostname to connect to (default "api.pcloud.com")
          --pcloud-password string                              Your pcloud password (obscured)
          --pcloud-root-folder-id string                        Fill in for rclone to use a non root folder as its starting point (default "d0")
          --pcloud-token string                                 OAuth Access Token as a JSON blob
          --pcloud-token-url string                             Token server url
          --pcloud-username string                              Your pcloud username
          --pikpak-chunk-size SizeSuffix                        Chunk size for multipart uploads (default 5Mi)
          --pikpak-description string                           Description of the remote
          --pikpak-device-id string                             Device ID used for authorization
          --pikpak-encoding Encoding                            The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,LeftSpace,RightSpace,RightPeriod,InvalidUtf8,Dot)
          --pikpak-hash-memory-limit SizeSuffix                 Files bigger than this will be cached on disk to calculate hash if required (default 10Mi)
          --pikpak-no-media-link                                Use original file links instead of media links
          --pikpak-pass string                                  Pikpak password (obscured)
          --pikpak-root-folder-id string                        ID of the root folder
          --pikpak-trashed-only                                 Only show files that are in the trash
          --pikpak-upload-concurrency int                       Concurrency for multipart uploads (default 4)
          --pikpak-upload-cutoff SizeSuffix                     Cutoff for switching to chunked upload (default 200Mi)
          --pikpak-use-trash                                    Send files to the trash instead of deleting permanently (default true)
          --pikpak-user string                                  Pikpak username
          --pikpak-user-agent string                            HTTP user agent for pikpak (default "Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:129.0) Gecko/20100101 Firefox/129.0")
          --pixeldrain-api-key string                           API key for your pixeldrain account
          --pixeldrain-api-url string                           The API endpoint to connect to. In the vast majority of cases it's fine to leave (default "https://pixeldrain.com/api")
          --pixeldrain-description string                       Description of the remote
          --pixeldrain-root-folder-id string                    Root of the filesystem to use (default "me")
          --premiumizeme-auth-url string                        Auth server URL
          --premiumizeme-client-credentials                     Use client credentials OAuth flow
          --premiumizeme-client-id string                       OAuth Client Id
          --premiumizeme-client-secret string                   OAuth Client Secret
          --premiumizeme-description string                     Description of the remote
          --premiumizeme-encoding Encoding                      The encoding for the backend (default Slash,DoubleQuote,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --premiumizeme-token string                           OAuth Access Token as a JSON blob
          --premiumizeme-token-url string                       Token server url
          --protondrive-2fa string                              The 2FA code
          --protondrive-app-version string                      The app version string
          --protondrive-description string                      Description of the remote
          --protondrive-enable-caching                          Caches the files and folders metadata to reduce API calls (default true)
          --protondrive-encoding Encoding                       The encoding for the backend (default Slash,LeftSpace,RightSpace,InvalidUtf8,Dot)
          --protondrive-mailbox-password string                 The mailbox password of your two-password proton account (obscured)
          --protondrive-original-file-size                      Return the file size before encryption (default true)
          --protondrive-otp-secret-key string                   The OTP secret key (obscured)
          --protondrive-password string                         The password of your proton account (obscured)
          --protondrive-replace-existing-draft                  Create a new revision when filename conflict is detected
          --protondrive-username string                         The username of your proton account
          --putio-auth-url string                               Auth server URL
          --putio-client-credentials                            Use client credentials OAuth flow
          --putio-client-id string                              OAuth Client Id
          --putio-client-secret string                          OAuth Client Secret
          --putio-description string                            Description of the remote
          --putio-encoding Encoding                             The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --putio-token string                                  OAuth Access Token as a JSON blob
          --putio-token-url string                              Token server url
          --qingstor-access-key-id string                       QingStor Access Key ID
          --qingstor-chunk-size SizeSuffix                      Chunk size to use for uploading (default 4Mi)
          --qingstor-connection-retries int                     Number of connection retries (default 3)
          --qingstor-description string                         Description of the remote
          --qingstor-encoding Encoding                          The encoding for the backend (default Slash,Ctl,InvalidUtf8)
          --qingstor-endpoint string                            Enter an endpoint URL to connection QingStor API
          --qingstor-env-auth                                   Get QingStor credentials from runtime
          --qingstor-secret-access-key string                   QingStor Secret Access Key (password)
          --qingstor-upload-concurrency int                     Concurrency for multipart uploads (default 1)
          --qingstor-upload-cutoff SizeSuffix                   Cutoff for switching to chunked upload (default 200Mi)
          --qingstor-zone string                                Zone to connect to
          --quatrix-api-key string                              API key for accessing Quatrix account
          --quatrix-description string                          Description of the remote
          --quatrix-effective-upload-time string                Wanted upload time for one chunk (default "4s")
          --quatrix-encoding Encoding                           The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --quatrix-hard-delete                                 Delete files permanently rather than putting them into the trash
          --quatrix-host string                                 Host name of Quatrix account
          --quatrix-maximal-summary-chunk-size SizeSuffix       The maximal summary for all chunks. It should not be less than 'transfers'*'minimal_chunk_size' (default 95.367Mi)
          --quatrix-minimal-chunk-size SizeSuffix               The minimal size for one chunk (default 9.537Mi)
          --quatrix-skip-project-folders                        Skip project folders in operations
          --s3-access-key-id string                             AWS Access Key ID
          --s3-acl string                                       Canned ACL used when creating buckets and storing or copying objects
          --s3-bucket-acl string                                Canned ACL used when creating buckets
          --s3-bucket-object-lock-enabled                       Enable Object Lock when creating new buckets
          --s3-bypass-governance-retention                      Allow deleting or modifying objects locked with GOVERNANCE mode
          --s3-chunk-size SizeSuffix                            Chunk size to use for uploading (default 5Mi)
          --s3-copy-cutoff SizeSuffix                           Cutoff for switching to multipart copy (default 4.656Gi)
          --s3-decompress                                       If set this will decompress gzip encoded objects
          --s3-description string                               Description of the remote
          --s3-directory-bucket                                 Set to use AWS Directory Buckets
          --s3-directory-markers                                Upload an empty object with a trailing slash when a new directory is created
          --s3-disable-checksum                                 Don't store MD5 checksum with object metadata
          --s3-disable-http2                                    Disable usage of http2 for S3 backends
          --s3-download-url string                              Custom endpoint for downloads
          --s3-encoding Encoding                                The encoding for the backend (default Slash,InvalidUtf8,Dot)
          --s3-endpoint string                                  Endpoint for S3 API
          --s3-env-auth                                         Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars)
          --s3-force-path-style                                 If true use path style access if false use virtual hosted style (default true)
          --s3-ibm-api-key string                               IBM API Key to be used to obtain IAM token
          --s3-ibm-iam-endpoint string                          IBM IAM Endpoint to use for authentication
          --s3-ibm-resource-instance-id string                  IBM service instance id
          --s3-leave-parts-on-error                             If true avoid calling abort upload on a failure, leaving all successfully uploaded parts on S3 for manual recovery
          --s3-list-chunk int                                   Size of listing chunk (response list for each ListObject S3 request) (default 1000)
          --s3-list-url-encode Tristate                         Whether to url encode listings: true/false/unset (default unset)
          --s3-list-version int                                 Version of ListObjects to use: 1,2 or 0 for auto
          --s3-list-versions-oldest-first Tristate              Set if the backend returns object versions oldest first (default unset)
          --s3-location-constraint string                       Location constraint - must be set to match the Region
          --s3-max-upload-parts int                             Maximum number of parts in a multipart upload (default 10000)
          --s3-might-gzip Tristate                              Set this if the backend might gzip objects (default unset)
          --s3-no-check-bucket                                  If set, don't attempt to check the bucket exists or create it
          --s3-no-head                                          If set, don't HEAD uploaded objects to check integrity
          --s3-no-head-object                                   If set, do not do HEAD before GET when getting objects
          --s3-no-system-metadata                               Suppress setting and reading of system metadata
          --s3-object-lock-legal-hold-status string             Object Lock legal hold status to apply when uploading or copying objects
          --s3-object-lock-mode string                          Object Lock mode to apply when uploading or copying objects
          --s3-object-lock-retain-until-date string             Object Lock retention until date to apply when uploading or copying objects
          --s3-object-lock-set-after-upload                     Set Object Lock via separate API calls after upload
          --s3-object-lock-supported Tristate                   Whether the provider supports S3 Object Lock (default unset)
          --s3-profile string                                   Profile to use in the shared credentials file
          --s3-provider string                                  Choose your S3 provider
          --s3-region string                                    Region to connect to
          --s3-requester-pays                                   Enables requester pays option when interacting with S3 bucket
          --s3-role-arn string                                  ARN of the IAM role to assume
          --s3-role-external-id string                          External ID for assumed role
          --s3-role-session-duration string                     Session duration for assumed role
          --s3-role-session-name string                         Session name for assumed role
          --s3-sdk-log-mode Bits                                Set to debug the SDK (default Off)
          --s3-secret-access-key string                         AWS Secret Access Key (password)
          --s3-server-side-encryption string                    The server-side encryption algorithm used when storing this object in S3
          --s3-session-token string                             An AWS session token
          --s3-shared-credentials-file string                   Path to the shared credentials file
          --s3-sign-accept-encoding Tristate                    Set if rclone should include Accept-Encoding as part of the signature (default unset)
          --s3-sse-customer-algorithm string                    If using SSE-C, the server-side encryption algorithm used when storing this object in S3
          --s3-sse-customer-key string                          To use SSE-C you may provide the secret encryption key used to encrypt/decrypt your data
          --s3-sse-customer-key-base64 string                   If using SSE-C you must provide the secret encryption key encoded in base64 format to encrypt/decrypt your data
          --s3-sse-customer-key-md5 string                      If using SSE-C you may provide the secret encryption key MD5 checksum (optional)
          --s3-sse-kms-key-id string                            If using KMS ID you must provide the ARN of Key
          --s3-storage-class string                             The storage class to use when storing new objects in S3
          --s3-upload-concurrency int                           Concurrency for multipart uploads and copies (default 4)
          --s3-upload-cutoff SizeSuffix                         Cutoff for switching to chunked upload (default 200Mi)
          --s3-use-accelerate-endpoint                          If true use the AWS S3 accelerated endpoint
          --s3-use-accept-encoding-gzip Accept-Encoding: gzip   Whether to send Accept-Encoding: gzip header (default unset)
          --s3-use-already-exists Tristate                      Set if rclone should report BucketAlreadyExists errors on bucket creation (default unset)
          --s3-use-arn-region                                   If true, enables arn region support for the service
          --s3-use-data-integrity-protections Tristate          If true use AWS S3 data integrity protections (default unset)
          --s3-use-dual-stack                                   If true use AWS S3 dual-stack endpoint (IPv6 support)
          --s3-use-multipart-etag Tristate                      Whether to use ETag in multipart uploads for verification (default unset)
          --s3-use-multipart-uploads Tristate                   Set if rclone should use multipart uploads (default unset)
          --s3-use-presigned-request                            Whether to use a presigned request or PutObject for single part uploads
          --s3-use-unsigned-payload Tristate                    Whether to use an unsigned payload in PutObject (default unset)
          --s3-use-x-id Tristate                                Set if rclone should add x-id URL parameters (default unset)
          --s3-v2-auth                                          If true use v2 authentication
          --s3-version-at Time                                  Show file versions as they were at the specified time (default off)
          --s3-version-deleted                                  Show deleted file markers when using versions
          --s3-versions                                         Include old versions in directory listings
          --seafile-2fa                                         Two-factor authentication ('true' if the account has 2FA enabled)
          --seafile-create-library                              Should rclone create a library if it doesn't exist
          --seafile-description string                          Description of the remote
          --seafile-encoding Encoding                           The encoding for the backend (default Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8,Dot)
          --seafile-library string                              Name of the library
          --seafile-library-key string                          Library password (for encrypted libraries only) (obscured)
          --seafile-pass string                                 Password (obscured)
          --seafile-url string                                  URL of seafile host to connect to
          --seafile-user string                                 User name (usually email address)
          --sftp-ask-password                                   Allow asking for SFTP password when needed
          --sftp-blake3sum-command string                       The command used to read BLAKE3 hashes
          --sftp-chunk-size SizeSuffix                          Upload and download chunk size (default 32Ki)
          --sftp-ciphers SpaceSepList                           Space separated list of ciphers to be used for session encryption, ordered by preference
          --sftp-concurrency int                                The maximum number of outstanding requests for one file (default 64)
          --sftp-connections int                                Maximum number of SFTP simultaneous connections, 0 for unlimited
          --sftp-copy-is-hardlink                               Set to enable server side copies using hardlinks
          --sftp-crc32sum-command string                        The command used to read CRC-32 hashes
          --sftp-description string                             Description of the remote
          --sftp-disable-concurrent-reads                       If set don't use concurrent reads
          --sftp-disable-concurrent-writes                      If set don't use concurrent writes
          --sftp-disable-hashcheck                              Disable the execution of SSH commands to determine if remote file hashing is available
          --sftp-hashes CommaSepList                            Comma separated list of supported checksum types
          --sftp-host string                                    SSH host to connect to
          --sftp-host-key-algorithms SpaceSepList               Space separated list of host key algorithms, ordered by preference
          --sftp-http-proxy string                              URL for HTTP CONNECT proxy
          --sftp-idle-timeout Duration                          Max time before closing idle connections (default 1m0s)
          --sftp-key-exchange SpaceSepList                      Space separated list of key exchange algorithms, ordered by preference
          --sftp-key-file string                                Path to PEM-encoded private key file
          --sftp-key-file-pass string                           The passphrase to decrypt the PEM-encoded private key file (obscured)
          --sftp-key-pem string                                 Raw PEM-encoded private key
          --sftp-key-use-agent                                  When set forces the usage of the ssh-agent
          --sftp-known-hosts-file string                        Optional path to known_hosts file
          --sftp-macs SpaceSepList                              Space separated list of MACs (message authentication code) algorithms, ordered by preference
          --sftp-md5sum-command string                          The command used to read MD5 hashes
          --sftp-pass string                                    SSH password, leave blank to use ssh-agent (obscured)
          --sftp-path-override string                           Override path used by SSH shell commands
          --sftp-port int                                       SSH port number (default 22)
          --sftp-pubkey string                                  SSH public certificate for public certificate based authentication
          --sftp-pubkey-file string                             Optional path to public key file
          --sftp-server-command string                          Specifies the path or command to run a sftp server on the remote host
          --sftp-set-env SpaceSepList                           Environment variables to pass to sftp and commands
          --sftp-set-modtime                                    Set the modified time on the remote if set (default true)
          --sftp-sha1sum-command string                         The command used to read SHA-1 hashes
          --sftp-sha256sum-command string                       The command used to read SHA-256 hashes
          --sftp-shell-type string                              The type of SSH shell on remote server, if any
          --sftp-skip-links                                     Set to skip any symlinks and any other non regular files
          --sftp-socks-proxy string                             Socks 5 proxy host
          --sftp-ssh SpaceSepList                               Path and arguments to external ssh binary
          --sftp-subsystem string                               Specifies the SSH2 subsystem on the remote host (default "sftp")
          --sftp-use-fstat                                      If set use fstat instead of stat
          --sftp-use-insecure-cipher                            Enable the use of insecure ciphers and key exchange methods
          --sftp-user string                                    SSH username (default "$USER")
          --sftp-xxh128sum-command string                       The command used to read XXH128 hashes
          --sftp-xxh3sum-command string                         The command used to read XXH3 hashes
          --shade-api-key string                                An API key for your account
          --shade-chunk-size SizeSuffix                         Chunk size to use for uploading (default 64Mi)
          --shade-description string                            Description of the remote
          --shade-drive-id string                               The ID of your drive, see this in the drive settings. Individual rclone configs must be made per drive
          --shade-encoding Encoding                             The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --shade-endpoint string                               Endpoint for the service
          --shade-max-upload-parts int                          Maximum amount of parts in a multipart upload (default 10000)
          --shade-token string                                  JWT Token for performing Shade FS operations. Don't set this value - rclone will set it automatically
          --shade-token-expiry string                           JWT Token Expiration time. Don't set this value - rclone will set it automatically
          --shade-upload-concurrency int                        Concurrency for multipart uploads and copies. This is the number of chunks of the same file that are uploaded concurrently for multipart uploads and copies (default 4)
          --sharefile-auth-url string                           Auth server URL
          --sharefile-chunk-size SizeSuffix                     Upload chunk size (default 64Mi)
          --sharefile-client-credentials                        Use client credentials OAuth flow
          --sharefile-client-id string                          OAuth Client Id
          --sharefile-client-secret string                      OAuth Client Secret
          --sharefile-description string                        Description of the remote
          --sharefile-encoding Encoding                         The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,LeftSpace,LeftPeriod,RightSpace,RightPeriod,InvalidUtf8,Dot)
          --sharefile-endpoint string                           Endpoint for API calls
          --sharefile-root-folder-id string                     ID of the root folder
          --sharefile-token string                              OAuth Access Token as a JSON blob
          --sharefile-token-url string                          Token server url
          --sharefile-upload-cutoff SizeSuffix                  Cutoff for switching to multipart upload (default 128Mi)
          --sia-api-password string                             Sia Daemon API Password (obscured)
          --sia-api-url string                                  Sia daemon API URL, like http://sia.daemon.host:9980 (default "http://127.0.0.1:9980")
          --sia-description string                              Description of the remote
          --sia-encoding Encoding                               The encoding for the backend (default Slash,Question,Hash,Percent,Del,Ctl,InvalidUtf8,Dot)
          --sia-user-agent string                               Siad User Agent (default "Sia-Agent")
          --skip-links                                          Don't warn about skipped symlinks
          --skip-specials                                       Don't warn about skipped pipes, sockets and device objects
          --smb-case-insensitive                                Whether the server is configured to be case-insensitive (default true)
          --smb-description string                              Description of the remote
          --smb-domain string                                   Domain name for NTLM authentication (default "WORKGROUP")
          --smb-encoding Encoding                               The encoding for the backend (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,RightSpace,RightPeriod,InvalidUtf8,Dot)
          --smb-hide-special-share                              Hide special shares (e.g. print$) which users aren't supposed to access (default true)
          --smb-host string                                     SMB server hostname to connect to
          --smb-idle-timeout Duration                           Max time before closing idle connections (default 1m0s)
          --smb-kerberos-ccache string                          Path to the Kerberos credential cache (krb5cc)
          --smb-pass string                                     SMB password (obscured)
          --smb-port int                                        SMB port number (default 445)
          --smb-spn string                                      Service principal name
          --smb-use-kerberos                                    Use Kerberos authentication
          --smb-user string                                     SMB username (default "$USER")
          --storj-access-grant string                           Access grant
          --storj-api-key string                                API key
          --storj-description string                            Description of the remote
          --storj-passphrase string                             Encryption passphrase
          --storj-provider string                               Choose an authentication method (default "existing")
          --storj-satellite-address string                      Satellite address (default "us1.storj.io")
          --sugarsync-access-key-id string                      Sugarsync Access Key ID
          --sugarsync-app-id string                             Sugarsync App ID
          --sugarsync-authorization string                      Sugarsync authorization
          --sugarsync-authorization-expiry string               Sugarsync authorization expiry
          --sugarsync-deleted-id string                         Sugarsync deleted folder id
          --sugarsync-description string                        Description of the remote
          --sugarsync-encoding Encoding                         The encoding for the backend (default Slash,Ctl,InvalidUtf8,Dot)
          --sugarsync-hard-delete                               Permanently delete files if true
          --sugarsync-private-access-key string                 Sugarsync Private Access Key
          --sugarsync-refresh-token string                      Sugarsync refresh token
          --sugarsync-root-id string                            Sugarsync root id
          --sugarsync-user string                               Sugarsync user
          --swift-application-credential-id string              Application Credential ID (OS_APPLICATION_CREDENTIAL_ID)
          --swift-application-credential-name string            Application Credential Name (OS_APPLICATION_CREDENTIAL_NAME)
          --swift-application-credential-secret string          Application Credential Secret (OS_APPLICATION_CREDENTIAL_SECRET)
          --swift-auth string                                   Authentication URL for server (OS_AUTH_URL)
          --swift-auth-token string                             Auth Token from alternate authentication - optional (OS_AUTH_TOKEN)
          --swift-auth-version int                              AuthVersion - optional - set to (1,2,3) if your auth URL has no version (ST_AUTH_VERSION)
          --swift-chunk-size SizeSuffix                         Above this size files will be chunked (default 5Gi)
          --swift-description string                            Description of the remote
          --swift-domain string                                 User domain - optional (v3 auth) (OS_USER_DOMAIN_NAME)
          --swift-encoding Encoding                             The encoding for the backend (default Slash,InvalidUtf8)
          --swift-endpoint-type string                          Endpoint type to choose from the service catalogue (OS_ENDPOINT_TYPE) (default "public")
          --swift-env-auth                                      Get swift credentials from environment variables in standard OpenStack form
          --swift-fetch-until-empty-page                        When paginating, always fetch unless we received an empty page
          --swift-key string                                    API key or password (OS_PASSWORD)
          --swift-leave-parts-on-error                          If true avoid calling abort upload on a failure
          --swift-no-chunk                                      Don't chunk files during streaming upload
          --swift-no-large-objects                              Disable support for static and dynamic large objects
          --swift-partial-page-fetch-threshold int              When paginating, fetch if the current page is within this percentage of the limit
          --swift-region string                                 Region name - optional (OS_REGION_NAME)
          --swift-storage-policy string                         The storage policy to use when creating a new container
          --swift-storage-url string                            Storage URL - optional (OS_STORAGE_URL)
          --swift-tenant string                                 Tenant name - optional for v1 auth, this or tenant_id required otherwise (OS_TENANT_NAME or OS_PROJECT_NAME)
          --swift-tenant-domain string                          Tenant domain - optional (v3 auth) (OS_PROJECT_DOMAIN_NAME)
          --swift-tenant-id string                              Tenant ID - optional for v1 auth, this or tenant required otherwise (OS_TENANT_ID)
          --swift-use-segments-container Tristate               Choose destination for large object segments (default unset)
          --swift-user string                                   User name to log in (OS_USERNAME)
          --swift-user-id string                                User ID to log in - optional - most swift systems use user and leave this blank (v3 auth) (OS_USER_ID)
          --ulozto-app-token string                             The application token identifying the app. An app API key can be either found in the API
          --ulozto-description string                           Description of the remote
          --ulozto-encoding Encoding                            The encoding for the backend (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --ulozto-list-page-size int                           The size of a single page for list commands. 1-500 (default 500)
          --ulozto-password string                              The password for the user (obscured)
          --ulozto-root-folder-slug string                      If set, rclone will use this folder as the root folder for all operations. For example,
          --ulozto-username string                              The username of the principal to operate as
          --union-action-policy string                          Policy to choose upstream on ACTION category (default "epall")
          --union-cache-time int                                Cache time of usage and free space (in seconds) (default 120)
          --union-create-policy string                          Policy to choose upstream on CREATE category (default "epmfs")
          --union-description string                            Description of the remote
          --union-min-free-space SizeSuffix                     Minimum viable free space for lfs/eplfs policies (default 1Gi)
          --union-search-policy string                          Policy to choose upstream on SEARCH category (default "ff")
          --union-upstreams string                              List of space separated upstreams
          --webdav-auth-redirect                                Preserve authentication on redirect
          --webdav-bearer-token string                          Bearer token instead of user/pass (e.g. a Macaroon)
          --webdav-bearer-token-command string                  Command to run to get a bearer token
          --webdav-description string                           Description of the remote
          --webdav-encoding string                              The encoding for the backend
          --webdav-headers CommaSepList                         Set HTTP headers for all transactions
          --webdav-nextcloud-chunk-size SizeSuffix              Nextcloud upload chunk size (default 10Mi)
          --webdav-owncloud-exclude-mounts                      Exclude ownCloud mounted storages
          --webdav-owncloud-exclude-shares                      Exclude ownCloud shares
          --webdav-pacer-min-sleep Duration                     Minimum time to sleep between API calls (default 10ms)
          --webdav-pass string                                  Password (obscured)
          --webdav-unix-socket string                           Path to a unix domain socket to dial to, instead of opening a TCP connection directly
          --webdav-url string                                   URL of http host to connect to
          --webdav-user string                                  User name
          --webdav-vendor string                                Name of the WebDAV site/service/software you are using
          --yandex-auth-url string                              Auth server URL
          --yandex-client-credentials                           Use client credentials OAuth flow
          --yandex-client-id string                             OAuth Client Id
          --yandex-client-secret string                         OAuth Client Secret
          --yandex-description string                           Description of the remote
          --yandex-encoding Encoding                            The encoding for the backend (default Slash,Del,Ctl,InvalidUtf8,Dot)
          --yandex-hard-delete                                  Delete files permanently rather than putting them into the trash
          --yandex-spoof-ua                                     Set the user agent to match an official version of the yandex disk client. May help with upload performance (default true)
          --yandex-token string                                 OAuth Access Token as a JSON blob
          --yandex-token-url string                             Token server url
          --zoho-auth-url string                                Auth server URL
          --zoho-client-credentials                             Use client credentials OAuth flow
          --zoho-client-id string                               OAuth Client Id
          --zoho-client-secret string                           OAuth Client Secret
          --zoho-description string                             Description of the remote
          --zoho-encoding Encoding                              The encoding for the backend (default Del,Ctl,InvalidUtf8)
          --zoho-region string                                  Zoho region to connect to
          --zoho-token string                                   OAuth Access Token as a JSON blob
          --zoho-token-url string                               Token server url
          --zoho-upload-cutoff SizeSuffix                       Cutoff for switching to large file upload api (>= 10 MiB) (default 10Mi)

Docker Volume Plugin

Introduction

Docker 1.9 has added support for creating named volumes via command-line
interface and mounting them in containers as a way to share data between
them. Since Docker 1.10 you can create named volumes with Docker Compose
by descriptions in docker-compose.yml files for use by container groups
on a single host. As of Docker 1.12 volumes are supported by Docker
Swarm included with Docker Engine and created from descriptions in swarm
compose v3 files for use with swarm stacks across multiple cluster
nodes.

Docker Volume Plugins augment the default local volume driver included
in Docker with stateful volumes shared across containers and hosts.
Unlike local volumes, your data will not be deleted when such volume is
removed. Plugins can run managed by the docker daemon, as a native
system service (under systemd, sysv or upstart) or as a standalone
executable. Rclone can run as docker volume plugin in all these modes.
It interacts with the local docker daemon via plugin API and handles
mounting of remote file systems into docker containers so it must run on
the same host as the docker daemon or on every Swarm node.

Getting started

In the first example we will use the SFTP rclone volume with Docker
engine on a standalone Ubuntu machine.

Start from installing Docker on the host.

The FUSE driver is a prerequisite for rclone mounting and should be
installed on host:

    sudo apt-get -y install fuse3

Create two directories required by rclone docker plugin:

    sudo mkdir -p /var/lib/docker-plugins/rclone/config
    sudo mkdir -p /var/lib/docker-plugins/rclone/cache

Install the managed rclone docker plugin for your architecture (here
amd64):

    docker plugin install rclone/docker-volume-rclone:amd64 args="-v" --alias rclone --grant-all-permissions
    docker plugin list

Create your SFTP volume:

    docker volume create firstvolume -d rclone -o type=sftp -o sftp-host=_hostname_ -o sftp-user=_username_ -o sftp-pass=_password_ -o allow-other=true

Note that since all options are static, you don't even have to run
rclone config or create the rclone.conf file (but the config directory
should still be present). In the simplest case you can use localhost as
hostname and your SSH credentials as username and password. You can also
change the remote path to your home directory on the host, for example
-o path=/home/username.

Time to create a test container and mount the volume into it:

    docker run --rm -it -v firstvolume:/mnt --workdir /mnt ubuntu:latest bash

If all goes well, you will enter the new container and change right to
the mounted SFTP remote. You can type ls to list the mounted directory
or otherwise play with it. Type exit when you are done. The container
will stop but the volume will stay, ready to be reused. When it's not
needed anymore, remove it:

    docker volume list
    docker volume remove firstvolume

Now let us try something more elaborate: Google Drive volume on
multi-node Docker Swarm.

You should start from installing Docker and FUSE, creating plugin
directories and installing rclone plugin on every swarm node. Then setup
the Swarm.

Google Drive volumes need an access token which can be setup via web
browser and will be periodically renewed by rclone. The managed plugin
cannot run a browser so we will use a technique similar to the rclone
setup on a headless box.

Run rclone config on another machine equipped with web browser and
graphical user interface. Create the Google Drive remote. When done,
transfer the resulting rclone.conf to the Swarm cluster and save as
/var/lib/docker-plugins/rclone/config/rclone.conf on every node. By
default this location is accessible only to the root user so you will
need appropriate privileges. The resulting config will look like this:

    [gdrive]
    type = drive
    scope = drive
    drive_id = 1234567...
    root_folder_id = 0Abcd...
    token = {"access_token":...}

Now create the file named example.yml with a swarm stack description
like this:

    version: '3'
    services:
      heimdall:
        image: linuxserver/heimdall:latest
        ports: [8080:80]
        volumes: [configdata:/config]
    volumes:
      configdata:
        driver: rclone
        driver_opts:
          remote: 'gdrive:heimdall'
          allow_other: 'true'
          vfs_cache_mode: full
          poll_interval: 0

and run the stack:

    docker stack deploy example -c ./example.yml

After a few seconds docker will spread the parsed stack description over
cluster, create the example_heimdall service on port 8080, run service
containers on one or more cluster nodes and request the
example_configdata volume from rclone plugins on the node hosts. You can
use the following commands to confirm results:

    docker service ls
    docker service ps example_heimdall
    docker volume ls

Point your browser to http://cluster.host.address:8080 and play with the
service. Stop it with docker stack remove example when you are done.
Note that the example_configdata volume(s) created on demand at the
cluster nodes will not be automatically removed together with the stack
but stay for future reuse. You can remove them manually by invoking the
docker volume remove example_configdata command on every node.

Creating Volumes via CLI

Volumes can be created with docker volume create. Here are a few
examples:

    docker volume create vol1 -d rclone -o remote=storj: -o vfs-cache-mode=full
    docker volume create vol2 -d rclone -o remote=:storj,access_grant=xxx:heimdall
    docker volume create vol3 -d rclone -o type=storj -o path=heimdall -o storj-access-grant=xxx -o poll-interval=0

Note the -d rclone flag that tells docker to request volume from the
rclone driver. This works even if you installed managed driver by its
full name rclone/docker-volume-rclone because you provided the
--alias rclone option.

Volumes can be inspected as follows:

    docker volume list
    docker volume inspect vol1

Volume Configuration

Rclone flags and volume options are set via the -o flag to the
docker volume create command. They include backend-specific parameters
as well as mount and VFS options. Also there are a few special -o
options: remote, fs, type, path, mount-type and persist.

remote determines an existing remote name from the config file, with
trailing colon and optionally with a remote path. See the full syntax in
the rclone documentation. This option can be aliased as fs to prevent
confusion with the remote parameter of such backends as crypt or alias.

The remote=:backend:dir/subdir syntax can be used to create on-the-fly
(config-less) remotes, while the type and path options provide a simpler
alternative for this. Using two split options

    -o type=backend -o path=dir/subdir

is equivalent to the combined syntax

    -o remote=:backend:dir/subdir

but is arguably easier to parameterize in scripts. The path part is
optional.

Mount and VFS options as well as backend parameters are named like their
twin command-line flags without the -- CLI prefix. Optionally you can
use underscores instead of dashes in option names. For example,
--vfs-cache-mode full becomes -o vfs-cache-mode=full or
-o vfs_cache_mode=full. Boolean CLI flags without value will gain the
true value, e.g. --allow-other becomes -o allow-other=true or
-o allow_other=true.

Please note that you can provide parameters only for the backend
immediately referenced by the backend type of mounted remote. If this is
a wrapping backend like alias, chunker or crypt, you cannot provide
options for the referred to remote or backend. This limitation is
imposed by the rclone connection string parser. The only workaround is
to feed plugin with rclone.conf or configure plugin arguments (see
below).

Special Volume Options

mount-type determines the mount method and in general can be one of:
mount, cmount, or mount2. This can be aliased as mount_type. It should
be noted that the managed rclone docker plugin currently does not
support the cmount method and mount2 is rarely needed. This option
defaults to the first found method, which is usually mount so you
generally won't need it.

persist is a reserved boolean (true/false) option. In future it will
allow to persist on-the-fly remotes in the plugin rclone.conf file.

Connection Strings

The remote value can be extended with connection strings as an
alternative way to supply backend parameters. This is equivalent to the
-o backend options with one syntactic difference. Inside connection
string the backend prefix must be dropped from parameter names but in
the -o param=value array it must be present. For instance, compare the
following option array

    -o remote=:sftp:/home -o sftp-host=localhost

with equivalent connection string:

    -o remote=:sftp,host=localhost:/home

This difference exists because flag options -o key=val include not only
backend parameters but also mount/VFS flags and possibly other settings.
Also it allows to discriminate the remote option from the crypt-remote
(or similarly named backend parameters) and arguably simplifies
scripting due to clearer value substitution.

Using with Swarm or Compose

Both Docker Swarm and Docker Compose use YAML-formatted text files to
describe groups (stacks) of containers, their properties, networks and
volumes. Compose uses the compose v2 format, Swarm uses the compose v3
format. They are mostly similar, differences are explained in the docker
documentation.

Volumes are described by the children of the top-level volumes: node.
Each of them should be named after its volume and have at least two
elements, the self-explanatory driver: rclone value and the driver_opts:
structure playing the same role as -o key=val CLI flags:

    volumes:
      volume_name_1:
        driver: rclone
        driver_opts:
          remote: 'gdrive:'
          allow_other: 'true'
          vfs_cache_mode: full
          token: '{"type": "borrower", "expires": "2021-12-31"}'
          poll_interval: 0

Notice a few important details:

-   YAML prefers _ in option names instead of -.
-   YAML treats single and double quotes interchangeably. Simple strings
    and integers can be left unquoted.
-   Boolean values must be quoted like 'true' or "false" because these
    two words are reserved by YAML.
-   The filesystem string is keyed with remote (or with fs). Normally
    you can omit quotes here, but if the string ends with colon, you
    must quote it like remote: "storage_box:".
-   YAML is picky about surrounding braces in values as this is in fact
    another syntax for key/value mappings. For example, JSON access
    tokens usually contain double quotes and surrounding braces, so you
    must put them in single quotes.

Installing as Managed Plugin

Docker daemon can install plugins from an image registry and run them
managed. We maintain the docker-volume-rclone plugin image on Docker
Hub.

Rclone volume plugin requires Docker Engine >= 19.03.15

The plugin requires presence of two directories on the host before it
can be installed. Note that plugin will not create them automatically.
By default they must exist on host at the following locations (though
you can tweak the paths):

-   /var/lib/docker-plugins/rclone/config is reserved for the
    rclone.conf config file and must exist even if it's empty and the
    config file is not present.
-   /var/lib/docker-plugins/rclone/cache holds the plugin state file as
    well as optional VFS caches.

You can install managed plugin with default settings as follows:

    docker plugin install rclone/docker-volume-rclone:amd64 --grant-all-permissions --alias rclone

The :amd64 part of the image specification after colon is called a tag.
Usually you will want to install the latest plugin for your
architecture. In this case the tag will just name it, like amd64 above.
The following plugin architectures are currently available:

-   amd64
-   arm64
-   arm-v7

Sometimes you might want a concrete plugin version, not the latest one.
Then you should use image tag in the form :ARCHITECTURE-VERSION. For
example, to install plugin version v1.56.2 on architecture arm64 you
will use tag arm64-1.56.2 (note the removed v) so the full image
specification becomes rclone/docker-volume-rclone:arm64-1.56.2.

We also provide the latest plugin tag, but since docker does not support
multi-architecture plugins as of the time of this writing, this tag is
currently an alias for amd64. By convention the latest tag is the
default one and can be omitted, thus both
rclone/docker-volume-rclone:latest and just rclone/docker-volume-rclone
will refer to the latest plugin release for the amd64 platform.

Also the amd64 part can be omitted from the versioned rclone plugin
tags. For example, rclone image reference
rclone/docker-volume-rclone:amd64-1.56.2 can be abbreviated as
rclone/docker-volume-rclone:1.56.2 for convenience. However, for
non-intel architectures you still have to use the full tag as amd64 or
latest will fail to start.

Managed plugin is in fact a special container running in a namespace
separate from normal docker containers. Inside it runs the
rclone serve docker command. The config and cache directories are
bind-mounted into the container at start. The docker daemon connects to
a unix socket created by the command inside the container. The command
creates on-demand remote mounts right inside, then docker machinery
propagates them through kernel mount namespaces and bind-mounts into
requesting user containers.

You can tweak a few plugin settings after installation when it's
disabled (not in use), for instance:

    docker plugin disable rclone
    docker plugin set rclone RCLONE_VERBOSE=2 config=/etc/rclone args="--vfs-cache-mode=writes --allow-other"
    docker plugin enable rclone
    docker plugin inspect rclone

Note that if docker refuses to disable the plugin, you should find and
remove all active volumes connected with it as well as containers and
swarm services that use them. This is rather tedious so please carefully
plan in advance.

You can tweak the following settings: args, config, cache, HTTP_PROXY,
HTTPS_PROXY, NO_PROXY and RCLONE_VERBOSE. It's your task to keep plugin
settings in sync across swarm cluster nodes.

args sets command-line arguments for the rclone serve docker command
(none by default). Arguments should be separated by space so you will
normally want to put them in quotes on the docker plugin set command
line. Both serve docker flags and generic rclone flags are supported,
including backend parameters that will be used as defaults for volume
creation. Note that plugin will fail (due to this docker bug) if the
args value is empty. Use e.g. args="-v" as a workaround.

config=/host/dir sets alternative host location for the config
directory. Plugin will look for rclone.conf here. It's not an error if
the config file is not present but the directory must exist. Please note
that plugin can periodically rewrite the config file, for example when
it renews storage access tokens. Keep this in mind and try to avoid
races between the plugin and other instances of rclone on the host that
might try to change the config simultaneously resulting in corrupted
rclone.conf. You can also put stuff like private key files for SFTP
remotes in this directory. Just note that it's bind-mounted inside the
plugin container at the predefined path /data/config. For example, if
your key file is named sftp-box1.key on the host, the corresponding
volume config option should read
-o sftp-key-file=/data/config/sftp-box1.key.

cache=/host/dir sets alternative host location for the cache directory.
The plugin will keep VFS caches here. Also it will create and maintain
the docker-plugin.state file in this directory. When the plugin is
restarted or reinstalled, it will look in this file to recreate any
volumes that existed previously. However, they will not be re-mounted
into consuming containers after restart. Usually this is not a problem
as the docker daemon normally will restart affected user containers
after failures, daemon restarts or host reboots.

RCLONE_VERBOSE sets plugin verbosity from 0 (errors only, by default) to
2 (debugging). Verbosity can be also tweaked via args="-v [-v] ...".
Since arguments are more generic, you will rarely need this setting. The
plugin output by default feeds the docker daemon log on local host. Log
entries are reflected as errors in the docker log but retain their
actual level assigned by rclone in the encapsulated message string.

HTTP_PROXY, HTTPS_PROXY, NO_PROXY customize the plugin proxy settings.

You can set custom plugin options right when you install it, in one go:

    docker plugin remove rclone
    docker plugin install rclone/docker-volume-rclone:amd64 \
           --alias rclone --grant-all-permissions \
           args="-v --allow-other" config=/etc/rclone
    docker plugin inspect rclone

Healthchecks

The docker plugin volume protocol doesn't provide a way for plugins to
inform the docker daemon that a volume is (un-)available. As a
workaround you can setup a healthcheck to verify that the mount is
responding, for example:

    services:
      my_service:
        image: my_image
        healthcheck:
          test: ls /path/to/rclone/mount || exit 1
          interval: 1m
          timeout: 15s
          retries: 3
          start_period: 15s

Running Plugin under Systemd

In most cases you should prefer managed mode. Moreover, MacOS and
Windows do not support native Docker plugins. Please use managed mode on
these systems. Proceed further only if you are on Linux.

First, install rclone. You can just run it (type rclone serve docker and
hit enter) for the test.

Install FUSE:

    sudo apt-get -y install fuse

Download two systemd configuration files: docker-volume-rclone.service
and docker-volume-rclone.socket.

Put them to the /etc/systemd/system/ directory:

    cp docker-volume-plugin.service /etc/systemd/system/
    cp docker-volume-plugin.socket  /etc/systemd/system/

Please note that all commands in this section must be run as root but we
omit sudo prefix for brevity. Now create directories required by the
service:

    mkdir -p /var/lib/docker-volumes/rclone
    mkdir -p /var/lib/docker-plugins/rclone/config
    mkdir -p /var/lib/docker-plugins/rclone/cache

Run the docker plugin service in the socket activated mode:

    systemctl daemon-reload
    systemctl start docker-volume-rclone.service
    systemctl enable docker-volume-rclone.socket
    systemctl start docker-volume-rclone.socket
    systemctl restart docker

Or run the service directly:

-   run systemctl daemon-reload to let systemd pick up new config
-   run systemctl enable docker-volume-rclone.service to make the new
    service start automatically when you power on your machine.
-   run systemctl start docker-volume-rclone.service to start the
    service now.
-   run systemctl restart docker to restart docker daemon and let it
    detect the new plugin socket. Note that this step is not needed in
    managed mode where docker knows about plugin state changes.

The two methods are equivalent from the user perspective, but I
personally prefer socket activation.

Troubleshooting

You can see managed plugin settings with

    docker plugin list
    docker plugin inspect rclone

Note that docker (including latest 20.10.7) will not show actual values
of args, just the defaults.

Use journalctl --unit docker to see managed plugin output as part of the
docker daemon log. Note that docker reflects plugin lines as errors but
their actual level can be seen from encapsulated message string.

You will usually install the latest version of managed plugin for your
platform. Use the following commands to print the actual installed
version:

    PLUGID=$(docker plugin list --no-trunc | awk '/rclone/{print$1}')
    sudo runc --root /run/docker/runtime-runc/plugins.moby exec $PLUGID rclone version

You can even use runc to run shell inside the plugin container:

    sudo runc --root /run/docker/runtime-runc/plugins.moby exec --tty $PLUGID bash

Also you can use curl to check the plugin socket connectivity:

    docker plugin list --no-trunc
    PLUGID=123abc...
    sudo curl -H Content-Type:application/json -XPOST -d {} --unix-socket /run/docker/plugins/$PLUGID/rclone.sock http://localhost/Plugin.Activate

though this is rarely needed.

If the plugin fails to work properly, and only as a last resort after
you tried diagnosing with the above methods, you can try clearing the
state of the plugin. Note that all existing rclone docker volumes will
probably have to be recreated. This might be needed because a reinstall
don't cleanup existing state files to allow for easy restoration, as
stated above.

    docker plugin disable rclone # disable the plugin to ensure no interference
    sudo rm /var/lib/docker-plugins/rclone/cache/docker-plugin.state # removing the plugin state
    docker plugin enable rclone # re-enable the plugin afterward

Caveats

Finally I'd like to mention a caveat with updating volume settings.
Docker CLI does not have a dedicated command like docker volume update.
It may be tempting to invoke docker volume create with updated options
on existing volume, but there is a gotcha. The command will do nothing,
it won't even return an error. I hope that docker maintainers will fix
this some day. In the meantime be aware that you must remove your volume
before recreating it with new settings:

    docker volume remove my_vol
    docker volume create my_vol -d rclone -o opt1=new_val1 ...

and verify that settings did update:

    docker volume list
    docker volume inspect my_vol

If docker refuses to remove the volume, you should find containers or
swarm services that use it and stop them first.

Bisync

bisync is considered an advanced command, so use with care. Make sure
you have read and understood the entire manual (especially the
Limitations section) before using, or data loss can result. Questions
can be asked in the Rclone Forum.

Getting started

-   Install rclone and setup your remotes.
-   Bisync will create its working directory at ~/.cache/rclone/bisync
    on Linux, /Users/yourusername/Library/Caches/rclone/bisync on Mac,
    or C:\Users\MyLogin\AppData\Local\rclone\bisync on Windows. Make
    sure that this location is writable.
-   Run bisync with the --resync flag, specifying the paths to the local
    and remote sync directory roots.
-   For successive sync runs, leave off the --resync flag. (Important!)
-   Consider using a filters file for excluding unnecessary files and
    directories from the sync.
-   Consider setting up the --check-access feature for safety.
-   On Linux or Mac, consider setting up a crontab entry. bisync can
    safely run in concurrent cron jobs thanks to lock files it
    maintains.

For example, your first command might look like this:

    rclone bisync remote1:path1 remote2:path2 --create-empty-src-dirs --compare size,modtime,checksum --slow-hash-sync-only --resilient -MvP --drive-skip-gdocs --fix-case --resync --dry-run

If all looks good, run it again without --dry-run. After that, remove
--resync as well.

Here is a typical run log (with timestamps removed for clarity):

    rclone bisync /testdir/path1/ /testdir/path2/ --verbose
    INFO  : Synching Path1 "/testdir/path1/" with Path2 "/testdir/path2/"
    INFO  : Path1 checking for diffs
    INFO  : - Path1    File is new                         - file11.txt
    INFO  : - Path1    File is newer                       - file2.txt
    INFO  : - Path1    File is newer                       - file5.txt
    INFO  : - Path1    File is newer                       - file7.txt
    INFO  : - Path1    File was deleted                    - file4.txt
    INFO  : - Path1    File was deleted                    - file6.txt
    INFO  : - Path1    File was deleted                    - file8.txt
    INFO  : Path1:    7 changes:    1 new,    3 newer,    0 older,    3 deleted
    INFO  : Path2 checking for diffs
    INFO  : - Path2    File is new                         - file10.txt
    INFO  : - Path2    File is newer                       - file1.txt
    INFO  : - Path2    File is newer                       - file5.txt
    INFO  : - Path2    File is newer                       - file6.txt
    INFO  : - Path2    File was deleted                    - file3.txt
    INFO  : - Path2    File was deleted                    - file7.txt
    INFO  : - Path2    File was deleted                    - file8.txt
    INFO  : Path2:    7 changes:    1 new,    3 newer,    0 older,    3 deleted
    INFO  : Applying changes
    INFO  : - Path1    Queue copy to Path2                 - /testdir/path2/file11.txt
    INFO  : - Path1    Queue copy to Path2                 - /testdir/path2/file2.txt
    INFO  : - Path2    Queue delete                        - /testdir/path2/file4.txt
    NOTICE: - WARNING  New or changed in both paths        - file5.txt
    NOTICE: - Path1    Renaming Path1 copy                 - /testdir/path1/file5.txt..path1
    NOTICE: - Path1    Queue copy to Path2                 - /testdir/path2/file5.txt..path1
    NOTICE: - Path2    Renaming Path2 copy                 - /testdir/path2/file5.txt..path2
    NOTICE: - Path2    Queue copy to Path1                 - /testdir/path1/file5.txt..path2
    INFO  : - Path2    Queue copy to Path1                 - /testdir/path1/file6.txt
    INFO  : - Path1    Queue copy to Path2                 - /testdir/path2/file7.txt
    INFO  : - Path2    Queue copy to Path1                 - /testdir/path1/file1.txt
    INFO  : - Path2    Queue copy to Path1                 - /testdir/path1/file10.txt
    INFO  : - Path1    Queue delete                        - /testdir/path1/file3.txt
    INFO  : - Path2    Do queued copies to                 - Path1
    INFO  : - Path1    Do queued copies to                 - Path2
    INFO  : -          Do queued deletes on                - Path1
    INFO  : -          Do queued deletes on                - Path2
    INFO  : Updating listings
    INFO  : Validating listings for Path1 "/testdir/path1/" vs Path2 "/testdir/path2/"
    INFO  : Bisync successful

Command line syntax

    $ rclone bisync --help
    Usage:
      rclone bisync remote1:path1 remote2:path2 [flags]

    Positional arguments:
      Path1, Path2  Local path, or remote storage with ':' plus optional path.
                    Type 'rclone listremotes' for list of configured remotes.

    Optional Flags:
          --backup-dir1 string                   --backup-dir for Path1. Must be a non-overlapping path on the same remote.
          --backup-dir2 string                   --backup-dir for Path2. Must be a non-overlapping path on the same remote.
          --check-access                         Ensure expected RCLONE_TEST files are found on both Path1 and Path2 filesystems, else abort.
          --check-filename string                Filename for --check-access (default: RCLONE_TEST)
          --check-sync string                    Controls comparison of final listings: true|false|only (default: true) (default "true")
          --compare string                       Comma-separated list of bisync-specific compare options ex. 'size,modtime,checksum' (default: 'size,modtime')
          --conflict-loser ConflictLoserAction   Action to take on the loser of a sync conflict (when there is a winner) or on both files (when there is no winner): , num, pathname, delete (default: num)
          --conflict-resolve string              Automatically resolve conflicts by preferring the version that is: none, path1, path2, newer, older, larger, smaller (default: none) (default "none")
          --conflict-suffix string               Suffix to use when renaming a --conflict-loser. Can be either one string or two comma-separated strings to assign different suffixes to Path1/Path2. (default: 'conflict')
          --create-empty-src-dirs                Sync creation and deletion of empty directories. (Not compatible with --remove-empty-dirs)
          --download-hash                        Compute hash by downloading when otherwise unavailable. (warning: may be slow and use lots of data!)
          --filters-file string                  Read filtering patterns from a file
          --force                                Bypass --max-delete safety check and run the sync. Consider using with --verbose
      -h, --help                                 help for bisync
          --ignore-listing-checksum              Do not use checksums for listings (add --ignore-checksum to additionally skip post-copy checksum checks)
          --max-lock Duration                    Consider lock files older than this to be expired (default: 0 (never expire)) (minimum: 2m) (default 0s)
          --no-cleanup                           Retain working files (useful for troubleshooting and testing).
          --no-slow-hash                         Ignore listing checksums only on backends where they are slow
          --recover                              Automatically recover from interruptions without requiring --resync.
          --remove-empty-dirs                    Remove ALL empty directories at the final cleanup step.
          --resilient                            Allow future runs to retry after certain less-serious errors, instead of requiring --resync.
      -1, --resync                               Performs the resync run. Equivalent to --resync-mode path1. Consider using --verbose or --dry-run first.
          --resync-mode string                   During resync, prefer the version that is: path1, path2, newer, older, larger, smaller (default: path1 if --resync, otherwise none for no resync.) (default "none")
          --retries int                          Retry operations this many times if they fail (requires --resilient). (default 3)
          --retries-sleep Duration               Interval between retrying operations if they fail, e.g. 500ms, 60s, 5m (0 to disable) (default 0s)
          --slow-hash-sync-only                  Ignore slow checksums for listings and deltas, but still consider them during sync calls.
          --workdir string                       Use custom working dir - useful for testing. (default: {WORKDIR})
          --max-delete PERCENT                   Safety check on maximum percentage of deleted files allowed. If exceeded, the bisync run will abort. (default: 50%)
      -n, --dry-run                              Go through the motions - No files are copied/deleted.
      -v, --verbose                              Increases logging verbosity. May be specified more than once for more details.

Arbitrary rclone flags may be specified on the bisync command line, for
example
rclone bisync ./testdir/path1/ gdrive:testdir/path2/ --drive-skip-gdocs -v -v --timeout 10s
Note that interactions of various rclone flags with bisync process flow
has not been fully tested yet.

Paths

Path1 and Path2 arguments may be references to any mix of local
directory paths (absolute or relative), UNC paths (//server/share/path),
Windows drive paths (with a drive letter and :) or configured remotes
with optional subdirectory paths. Cloud references are distinguished by
having a : in the argument (see Windows support below).

Path1 and Path2 are treated equally, in that neither has priority for
file changes (except during --resync), and access efficiency does not
change whether a remote is on Path1 or Path2.

The listings in bisync working directory (default:
~/.cache/rclone/bisync) are named based on the Path1 and Path2 arguments
so that separate syncs to individual directories within the tree may be
set up, e.g.: path_to_local_tree..dropbox_subdir.lst.

Any empty directories after the sync on both the Path1 and Path2
filesystems are not deleted by default, unless --create-empty-src-dirs
is specified. If the --remove-empty-dirs flag is specified, then both
paths will have ALL empty directories purged as the last step in the
process.

Command-line flags

--resync

This will effectively make both Path1 and Path2 filesystems contain a
matching superset of all files. By default, Path2 files that do not
exist in Path1 will be copied to Path1, and the process will then copy
the Path1 tree to Path2.

The --resync sequence is roughly equivalent to the following (but see
--resync-mode for other options):

    rclone copy Path2 Path1 --ignore-existing [--create-empty-src-dirs]
    rclone copy Path1 Path2 [--create-empty-src-dirs]

The base directories on both Path1 and Path2 filesystems must exist or
bisync will fail. This is required for safety - that bisync can verify
that both paths are valid.

When using --resync, a newer version of a file on the Path2 filesystem
will (by default) be overwritten by the Path1 filesystem version. (Note
that this is NOT entirely symmetrical, and more symmetrical options can
be specified with the --resync-mode flag.) Carefully evaluate deltas
using --dry-run.

For a resync run, one of the paths may be empty (no files in the path
tree). The resync run should result in files on both paths, else a
normal non-resync run will fail.

For a non-resync run, either path being empty (no files in the tree)
fails with
Empty current PathN listing. Cannot sync to an empty directory: X.pathN.lst
This is a safety check that an unexpected empty path does not result in
deleting everything in the other path.

Note that --resync implies --resync-mode path1 unless a different
--resync-mode is explicitly specified. It is not necessary to use both
the --resync and --resync-mode flags -- either one is sufficient without
the other.

Note: --resync (including --resync-mode) should only be used under three
specific (rare) circumstances:

1.  It is your first bisync run (between these two paths)
2.  You've just made changes to your bisync settings (such as editing
    the contents of your --filters-file)
3.  There was an error on the prior run, and as a result, bisync now
    requires --resync to recover

The rest of the time, you should omit --resync. The reason is because
--resync will only copy (not sync) each side to the other. Therefore, if
you included --resync for every bisync run, it would never be possible
to delete a file -- the deleted file would always keep reappearing at
the end of every run (because it's being copied from the other side
where it still exists). Similarly, renaming a file would always result
in a duplicate copy (both old and new name) on both sides.

If you find that frequent interruptions from #3 are an issue, rather
than automatically running --resync, the recommended alternative is to
use the --resilient, --recover, and --conflict-resolve flags, (along
with Graceful Shutdown mode, when needed) for a very robust
"set-it-and-forget-it" bisync setup that can automatically bounce back
from almost any interruption it might encounter. Consider adding
something like the following:

    --resilient --recover --max-lock 2m --conflict-resolve newer

--resync-mode CHOICE

In the event that a file differs on both sides during a --resync,
--resync-mode controls which version will overwrite the other. The
supported options are similar to --conflict-resolve. For all of the
following options, the version that is kept is referred to as the
"winner", and the version that is overwritten (deleted) is referred to
as the "loser". The options are named after the "winner":

-   path1 - (the default) - the version from Path1 is unconditionally
    considered the winner (regardless of modtime and size, if any). This
    can be useful if one side is more trusted or up-to-date than the
    other, at the time of the --resync.
-   path2 - same as path1, except the path2 version is considered the
    winner.
-   newer - the newer file (by modtime) is considered the winner,
    regardless of which side it came from. This may result in having a
    mix of some winners from Path1, and some winners from Path2. (The
    implementation is analogous to running rclone copy --update in both
    directions.)
-   older - same as newer, except the older file is considered the
    winner, and the newer file is considered the loser.
-   larger - the larger file (by size) is considered the winner
    (regardless of modtime, if any). This can be a useful option for
    remotes without modtime support, or with the kinds of files (such as
    logs) that tend to grow but not shrink, over time.
-   smaller - the smaller file (by size) is considered the winner
    (regardless of modtime, if any).

For all of the above options, note the following:

-   If either of the underlying remotes lacks support for the chosen
    method, it will be ignored and will fall back to the default of
    path1. (For example, if --resync-mode newer is set, but one of the
    paths uses a remote that doesn't support modtime.)
-   If a winner can't be determined because the chosen method's
    attribute is missing or equal, it will be ignored, and bisync will
    instead try to determine whether the files differ by looking at the
    other --compare methods in effect. (For example, if
    --resync-mode newer is set, but the Path1 and Path2 modtimes are
    identical, bisync will compare the sizes.) If bisync concludes that
    they differ, preference is given to whichever is the "source" at
    that moment. (In practice, this gives a slight advantage to Path2,
    as the 2to1 copy comes before the 1to2 copy.) If the files do not
    differ, nothing is copied (as both sides are already correct).
-   These options apply only to files that exist on both sides (with the
    same name and relative path). Files that exist only on one side and
    not the other are always copied to the other, during --resync (this
    is one of the main differences between resync and non-resync runs.).
-   --conflict-resolve, --conflict-loser, and --conflict-suffix do not
    apply during --resync, and unlike these flags, nothing is renamed
    during --resync. When a file differs on both sides during --resync,
    one version always overwrites the other (much like in rclone copy.)
    (Consider using --backup-dir to retain a backup of the losing
    version.)
-   Unlike for --conflict-resolve, --resync-mode none is not a valid
    option (or rather, it will be interpreted as "no resync", unless
    --resync has also been specified, in which case it will be ignored.)
-   Winners and losers are decided at the individual file-level only
    (there is not currently an option to pick an entire winning
    directory atomically, although the path1 and path2 options typically
    produce a similar result.)
-   To maintain backward-compatibility, the --resync flag implies
    --resync-mode path1 unless a different --resync-mode is explicitly
    specified. Similarly, all --resync-mode options (except none) imply
    --resync, so it is not necessary to use both the --resync and
    --resync-mode flags simultaneously -- either one is sufficient
    without the other.

--check-access

Access check files are an additional safety measure against data loss.
bisync will ensure it can find matching RCLONE_TEST files in the same
places in the Path1 and Path2 filesystems. RCLONE_TEST files are not
generated automatically. For --check-access to succeed, you must first
either: A) Place one or more RCLONE_TEST files in both systems, or B)
Set --check-filename to a filename already in use in various locations
throughout your sync'd fileset. Recommended methods for A) include:

-   rclone touch Path1/RCLONE_TEST (create a new file)
-   rclone copyto Path1/RCLONE_TEST Path2/RCLONE_TEST (copy an existing
    file)
-   rclone copy Path1/RCLONE_TEST Path2/RCLONE_TEST  --include "RCLONE_TEST"
    (copy multiple files at once, recursively)
-   create the files manually (outside of rclone)
-   run bisync once without --check-access to set matching files on both
    filesystems will also work, but is not preferred, due to potential
    for user error (you are temporarily disabling the safety feature).

Note that --check-access is still enforced on --resync, so
bisync --resync --check-access will not work as a method of initially
setting the files (this is to ensure that bisync can't inadvertently
circumvent its own safety switch.)

Time stamps and file contents for RCLONE_TEST files are not important,
just the names and locations. If you have symbolic links in your sync
tree it is recommended to place RCLONE_TEST files in the linked-to
directory tree to protect against bisync assuming a bunch of deleted
files if the linked-to tree should not be accessible. See also the
--check-filename flag.

--check-filename

Name of the file(s) used in access health validation. The default
--check-filename is RCLONE_TEST. One or more files having this filename
must exist, synchronized between your source and destination filesets,
in order for --check-access to succeed. See --check-access for
additional details.

--compare

As of v1.66, bisync fully supports comparing based on any combination of
size, modtime, and checksum (lifting the prior restriction on backends
without modtime support.)

By default (without the --compare flag), bisync inherits the same
comparison options as sync (that is: size and modtime by default, unless
modified with flags such as --checksum or --size-only.)

If the --compare flag is set, it will override these defaults. This can
be useful if you wish to compare based on combinations not currently
supported in sync, such as comparing all three of size AND modtime AND
checksum simultaneously (or just modtime AND checksum).

--compare takes a comma-separated list, with the currently supported
values being size, modtime, and checksum. For example, if you want to
compare size and checksum, but not modtime, you would do:

    --compare size,checksum

Or if you want to compare all three:

    --compare size,modtime,checksum

--compare overrides any conflicting flags. For example, if you set the
conflicting flags --compare checksum --size-only, --size-only will be
ignored, and bisync will compare checksum and not size. To avoid
confusion, it is recommended to use either --compare or the normal sync
flags, but not both.

If --compare includes checksum and both remotes support checksums but
have no hash types in common with each other, checksums will be
considered only for comparisons within the same side (to determine what
has changed since the prior sync), but not for comparisons against the
opposite side. If one side supports checksums and the other does not,
checksums will only be considered on the side that supports them.

When comparing with checksum and/or size without modtime, bisync cannot
determine whether a file is newer or older -- only whether it is changed
or unchanged. (If it is changed on both sides, bisync still does the
standard equality-check to avoid declaring a sync conflict unless it
absolutely has to.)

It is recommended to do a --resync when changing --compare settings, as
otherwise your prior listing files may not contain the attributes you
wish to compare (for example, they will not have stored checksums if you
were not previously comparing checksums.)

--ignore-listing-checksum

When --checksum or --compare checksum is set, bisync will retrieve (or
generate) checksums (for backends that support them) when creating the
listings for both paths, and store the checksums in the listing files.
--ignore-listing-checksum will disable this behavior, which may speed
things up considerably, especially on backends (such as local) where
hashes must be computed on the fly instead of retrieved. Please note the
following:

-   As of v1.66, --ignore-listing-checksum is now automatically set when
    neither --checksum nor --compare checksum are in use (as the
    checksums would not be used for anything.)
-   --ignore-listing-checksum is NOT the same as --ignore-checksum, and
    you may wish to use one or the other, or both. In a nutshell:
    --ignore-listing-checksum controls whether checksums are considered
    when scanning for diffs, while --ignore-checksum controls whether
    checksums are considered during the copy/sync operations that
    follow, if there ARE diffs.
-   Unless --ignore-listing-checksum is passed, bisync currently
    computes hashes for one path even when there's no common hash with
    the other path (for example, a crypt remote.) This can still be
    beneficial, as the hashes will still be used to detect changes
    within the same side (if --checksum or --compare checksum is set),
    even if they can't be used to compare against the opposite side.
-   If you wish to ignore listing checksums only on remotes where they
    are slow to compute, consider using --no-slow-hash (or
    --slow-hash-sync-only) instead of --ignore-listing-checksum.
-   If --ignore-listing-checksum is used simultaneously with
    --compare checksum (or --checksum), checksums will be ignored for
    bisync deltas, but still considered during the sync operations that
    follow (if deltas are detected based on modtime and/or size.)

--no-slow-hash

On some remotes (notably local), checksums can dramatically slow down a
bisync run, because hashes cannot be stored and need to be computed in
real-time when they are requested. On other remotes (such as drive),
they add practically no time at all. The --no-slow-hash flag will
automatically skip checksums on remotes where they are slow, while still
comparing them on others (assuming --compare includes checksum.) This
can be useful when one of your bisync paths is slow but you still want
to check checksums on the other, for a more robust sync.

--slow-hash-sync-only

Same as --no-slow-hash, except slow hashes are still considered during
sync calls. They are still NOT considered for determining deltas, nor or
they included in listings. They are also skipped during --resync. The
main use case for this flag is when you have a large number of files,
but relatively few of them change from run to run -- so you don't want
to check your entire tree every time (it would take too long), but you
still want to consider checksums for the smaller group of files for
which a modtime or size change was detected. Keep in mind that this
speed savings comes with a safety trade-off: if a file's content were to
change without a change to its modtime or size, bisync would not detect
it, and it would not be synced.

--slow-hash-sync-only is only useful if both remotes share a common hash
type (if they don't, bisync will automatically fall back to
--no-slow-hash.) Both --no-slow-hash and --slow-hash-sync-only have no
effect without --compare checksum (or --checksum).

--download-hash

If --download-hash is set, bisync will use best efforts to obtain an MD5
checksum by downloading and computing on-the-fly, when checksums are not
otherwise available (for example, a remote that doesn't support them.)
Note that since rclone has to download the entire file, this may
dramatically slow down your bisync runs, and is also likely to use a lot
of data, so it is probably not practical for bisync paths with a large
total file size. However, it can be a good option for syncing
small-but-important files with maximum accuracy (for example, a source
code repo on a crypt remote.) An additional advantage over methods like
cryptcheck is that the original file is not required for comparison (for
example, --download-hash can be used to bisync two different crypt
remotes with different passwords.)

When --download-hash is set, bisync still looks for more efficient
checksums first, and falls back to downloading only when none are found.
It takes priority over conflicting flags such as --no-slow-hash.
--download-hash is not suitable for Google Docs and other files of
unknown size, as their checksums would change from run to run (due to
small variances in the internals of the generated export file.)
Therefore, bisync automatically skips --download-hash for files with a
size less than 0.

See also: Hasher backend, cryptcheck command, rclone check --download
option, md5sum command

--max-delete

As a safety check, if greater than the --max-delete percent of files
were deleted on either the Path1 or Path2 filesystem, then bisync will
abort with a warning message, without making any changes. The default
--max-delete is 50%. One way to trigger this limit is to rename a
directory that contains more than half of your files. This will appear
to bisync as a bunch of deleted files and a bunch of new files. This
safety check is intended to block bisync from deleting all of the files
on both filesystems due to a temporary network access issue, or if the
user had inadvertently deleted the files on one side or the other. To
force the sync, either set a different delete percentage limit, e.g.
--max-delete 75 (allows up to 75% deletion), or use --force to bypass
the check.

Also see the all files changed check.

--filters-file

By using rclone filter features you can exclude file types or directory
sub-trees from the sync. See the bisync filters section and generic
--filter-from documentation. An example filters file contains filters
for non-allowed files for syncing with Dropbox.

If you make changes to your filters file then bisync requires a run with
--resync. This is a safety feature, which prevents existing files on the
Path1 and/or Path2 side from seeming to disappear from view (since they
are excluded in the new listings), which would fool bisync into seeing
them as deleted (as compared to the prior run listings), and then bisync
would proceed to delete them for real.

To block this from happening, bisync calculates an MD5 hash of the
filters file and stores the hash in a .md5 file in the same place as
your filters file. On the next run with --filters-file set, bisync
re-calculates the MD5 hash of the current filters file and compares it
to the hash stored in the .md5 file. If they don't match, the run aborts
with a critical error and thus forces you to do a --resync, likely
avoiding a disaster.

--conflict-resolve CHOICE

In bisync, a "conflict" is a file that is new or changed on both sides
(relative to the prior run) AND is not currently identical on both
sides. --conflict-resolve controls how bisync handles such a scenario.
The currently supported options are:

-   none - (the default) - do not attempt to pick a winner, keep and
    rename both files according to --conflict-loser and
    --conflict-suffix settings. For example, with the default settings,
    file.txt on Path1 is renamed file.txt.conflict1 and file.txt on
    Path2 is renamed file.txt.conflict2. Both are copied to the opposite
    path during the run, so both sides end up with a copy of both files.
    (As none is the default, it is not necessary to specify
    --conflict-resolve none -- you can just omit the flag.)
-   newer - the newer file (by modtime) is considered the winner and is
    copied without renaming. The older file (the "loser") is handled
    according to --conflict-loser and --conflict-suffix settings (either
    renamed or deleted.) For example, if file.txt on Path1 is newer than
    file.txt on Path2, the result on both sides (with other default
    settings) will be file.txt (winner from Path1) and
    file.txt.conflict1 (loser from Path2).
-   older - same as newer, except the older file is considered the
    winner, and the newer file is considered the loser.
-   larger - the larger file (by size) is considered the winner
    (regardless of modtime, if any).
-   smaller - the smaller file (by size) is considered the winner
    (regardless of modtime, if any).
-   path1 - the version from Path1 is unconditionally considered the
    winner (regardless of modtime and size, if any). This can be useful
    if one side is usually more trusted or up-to-date than the other.
-   path2 - same as path1, except the path2 version is considered the
    winner.

For all of the above options, note the following:

-   If either of the underlying remotes lacks support for the chosen
    method, it will be ignored and fall back to none. (For example, if
    --conflict-resolve newer is set, but one of the paths uses a remote
    that doesn't support modtime.)
-   If a winner can't be determined because the chosen method's
    attribute is missing or equal, it will be ignored and fall back to
    none. (For example, if --conflict-resolve newer is set, but the
    Path1 and Path2 modtimes are identical, even if the sizes may
    differ.)
-   If the file's content is currently identical on both sides, it is
    not considered a "conflict", even if new or changed on both sides
    since the prior sync. (For example, if you made a change on one side
    and then synced it to the other side by other means.) Therefore,
    none of the conflict resolution flags apply in this scenario.
-   The conflict resolution flags do not apply during a --resync, as
    there is no "prior run" to speak of (but see --resync-mode for
    similar options.)

--conflict-loser CHOICE

--conflict-loser determines what happens to the "loser" of a sync
conflict (when --conflict-resolve determines a winner) or to both files
(when there is no winner.) The currently supported options are:

-   num - (the default) - auto-number the conflicts by automatically
    appending the next available number to the --conflict-suffix, in
    chronological order. For example, with the default settings, the
    first conflict for file.txt will be renamed file.txt.conflict1. If
    file.txt.conflict1 already exists, file.txt.conflict2 will be used
    instead (etc., up to a maximum of 9223372036854775807 conflicts.)
-   pathname - rename the conflicts according to which side they came
    from, which was the default behavior prior to v1.66. For example,
    with --conflict-suffix path, file.txt from Path1 will be renamed
    file.txt.path1, and file.txt from Path2 will be renamed
    file.txt.path2. If two non-identical suffixes are provided (ex.
    --conflict-suffix cloud,local), the trailing digit is omitted.
    Importantly, note that with pathname, there is no auto-numbering
    beyond 2, so if file.txt.path2 somehow already exists, it will be
    overwritten. Using a dynamic date variable in your --conflict-suffix
    (see below) is one possible way to avoid this. Note also that
    conflicts-of-conflicts are possible, if the original conflict is not
    manually resolved -- for example, if for some reason you edited
    file.txt.path1 on both sides, and those edits were different, the
    result would be file.txt.path1.path1 and file.txt.path1.path2 (in
    addition to file.txt.path2.)
-   delete - keep the winner only and delete the loser, instead of
    renaming it. If a winner cannot be determined (see
    --conflict-resolve for details on how this could happen), delete is
    ignored and the default num is used instead (i.e. both versions are
    kept and renamed, and neither is deleted.) delete is inherently the
    most destructive option, so use it only with care.

For all of the above options, note that if a winner cannot be determined
(see --conflict-resolve for details on how this could happen), or if
--conflict-resolve is not in use, both files will be renamed.

--conflict-suffix STRING[,STRING]

--conflict-suffix controls the suffix that is appended when bisync
renames a --conflict-loser (default: conflict). --conflict-suffix will
accept either one string or two comma-separated strings to assign
different suffixes to Path1 vs. Path2. This may be helpful later in
identifying the source of the conflict. (For example,
--conflict-suffix dropboxconflict,laptopconflict)

With --conflict-loser num, a number is always appended to the suffix.
With --conflict-loser pathname, a number is appended only when one
suffix is specified (or when two identical suffixes are specified.) i.e.
with --conflict-loser pathname, all of the following would produce
exactly the same result:

    --conflict-suffix path
    --conflict-suffix path,path
    --conflict-suffix path1,path2

Suffixes may be as short as 1 character. By default, the suffix is
appended after any other extensions (ex. file.jpg.conflict1), however,
this can be changed with the --suffix-keep-extension flag (i.e. to
instead result in file.conflict1.jpg).

--conflict-suffix supports several dynamic date variables when enclosed
in curly braces as globs. This can be helpful to track the date and/or
time that each conflict was handled by bisync. For example:

    --conflict-suffix {DateOnly}-conflict
    // result: myfile.txt.2006-01-02-conflict1

All of the formats described here (go Time.Layout constants) and here
(go Time.Format examples) are supported, but take care to ensure that
your chosen format does not use any characters that are illegal on your
remotes (for example, macOS does not allow colons in filenames, and
slashes are also best avoided as they are often interpreted as directory
separators.) To address this particular issue, an additional
{MacFriendlyTime} (or just {mac}) option is supported, which results in
2006-01-02 0304PM.

Note that --conflict-suffix is entirely separate from rclone's main
--sufix flag. This is intentional, as users may wish to use both flags
simultaneously, if also using --backup-dir.

Finally, note that the default in bisync prior to v1.66 was to rename
conflicts with ..path1 and ..path2 (with two periods, and path instead
of conflict.) Bisync now defaults to a single dot instead of a double
dot, but additional dots can be added by including them in the specified
suffix string. For example, for behavior equivalent to the previous
default, use:

    [--conflict-resolve none] --conflict-loser pathname --conflict-suffix .path

--check-sync

Enabled by default, the check-sync function checks that all of the same
files exist in both the Path1 and Path2 history listings. This
check-sync integrity check is performed at the end of the sync run by
default. Any untrapped failing copy/deletes between the two paths might
result in differences between the two listings and in the untracked file
content differences between the two paths. A resync run would correct
the error.

Note that the default-enabled integrity check locally executes a load of
both the final Path1 and Path2 listings, and thus adds to the run time
of a sync. Using --check-sync=false will disable it and may
significantly reduce the sync run times for very large numbers of files.

The check may be run manually with --check-sync=only. It runs only the
integrity check and terminates without actually syncing.

Note that currently, --check-sync only checks listing snapshots and NOT
the actual files on the remotes. Note also that the listing snapshots
will not know about any changes that happened during or after the latest
bisync run, as those will be discovered on the next run. Therefore,
while listings should always match each other at the end of a bisync
run, it is expected that they will not match the underlying remotes, nor
will the remotes match each other, if there were changes during or after
the run. This is normal, and any differences will be detected and synced
on the next run.

For a robust integrity check of the current state of the remotes (as
opposed to just their listing snapshots), consider using check (or
cryptcheck, if at least one path is a crypt remote) instead of
--check-sync, keeping in mind that differences are expected if files
changed during or after your last bisync run.

For example, a possible sequence could look like this:

1.  Normally scheduled bisync run:

        rclone bisync Path1 Path2 -MPc --check-access --max-delete 10 --filters-file /path/to/filters.txt -v --no-cleanup --ignore-listing-checksum --disable ListR --checkers=16 --drive-pacer-min-sleep=10ms --create-empty-src-dirs --resilient

2.  Periodic independent integrity check (perhaps scheduled nightly or
    weekly):

        rclone check -MvPc Path1 Path2 --filter-from /path/to/filters.txt

3.  If diffs are found, you have some choices to correct them. If one
    side is more up-to-date and you want to make the other side match
    it, you could run:

        rclone sync Path1 Path2 --filter-from /path/to/filters.txt --create-empty-src-dirs -MPc -v

(or switch Path1 and Path2 to make Path2 the source-of-truth)

Or, if neither side is totally up-to-date, you could run a --resync to
bring them back into agreement (but remember that this could cause
deleted files to re-appear.)

*Note also that rclone check does not currently include empty
directories, so if you want to know if any empty directories are out of
sync, consider alternatively running the above rclone sync command with
--dry-run added.

See also: Concurrent modifications, --resilient

--resilient

By default, most errors or interruptions will cause bisync to abort and
require --resync to recover. This is a safety feature, to prevent bisync
from running again until a user checks things out. However, in some
cases, bisync can go too far and enforce a lockout when one isn't
actually necessary, like for certain less-serious errors that might
resolve themselves on the next run. When --resilient is specified,
bisync tries its best to recover and self-correct, and only requires
--resync as a last resort when a human's involvement is absolutely
necessary. The intended use case is for running bisync as a background
process (such as via scheduled cron).

When using --resilient mode, bisync will still report the error and
abort, however it will not lock out future runs -- allowing the
possibility of retrying at the next normally scheduled time, without
requiring a --resync first. Examples of such retryable errors include
access test failures, missing listing files, and filter change
detections. These safety features will still prevent the current run
from proceeding -- the difference is that if conditions have improved by
the time of the next run, that next run will be allowed to proceed.
Certain more serious errors will still enforce a --resync lockout, even
in --resilient mode, to prevent data loss.

Behavior of --resilient may change in a future version. (See also:
--recover, --max-lock, Graceful Shutdown)

--recover

If --recover is set, in the event of a sudden interruption or other
un-graceful shutdown, bisync will attempt to automatically recover on
the next run, instead of requiring --resync. Bisync is able to recover
robustly by keeping one "backup" listing at all times, representing the
state of both paths after the last known successful sync. Bisync can
then compare the current state with this snapshot to determine which
changes it needs to retry. Changes that were synced after this snapshot
(during the run that was later interrupted) will appear to bisync as if
they are "new or changed on both sides", but in most cases this is not a
problem, as bisync will simply do its usual "equality check" and learn
that no action needs to be taken on these files, since they are already
identical on both sides.

In the rare event that a file is synced successfully during a run that
later aborts, and then that same file changes AGAIN before the next run,
bisync will think it is a sync conflict, and handle it accordingly.
(From bisync's perspective, the file has changed on both sides since the
last trusted sync, and the files on either side are not currently
identical.) Therefore, --recover carries with it a slightly increased
chance of having conflicts -- though in practice this is pretty rare, as
the conditions required to cause it are quite specific. This risk can be
reduced by using bisync's "Graceful Shutdown" mode (triggered by sending
SIGINT or Ctrl+C), when you have the choice, instead of forcing a sudden
termination.

--recover and --resilient are similar, but distinct -- the main
difference is that --resilient is about retrying, while --recover is
about recovering. Most users will probably want both. --resilient allows
retrying when bisync has chosen to abort itself due to safety features
such as failing --check-access or detecting a filter change. --resilient
does not cover external interruptions such as a user shutting down their
computer in the middle of a sync -- that is what --recover is for.

--max-lock

Bisync uses lock files as a safety feature to prevent interference from
other bisync runs while it is running. Bisync normally removes these
lock files at the end of a run, but if bisync is abruptly interrupted,
these files will be left behind. By default, they will lock out all
future runs, until the user has a chance to manually check things out
and remove the lock. As an alternative, --max-lock can be used to make
them automatically expire after a certain period of time, so that future
runs are not locked out forever, and auto-recovery is possible.
--max-lock can be any duration 2m or greater (or 0 to disable). If set,
lock files older than this will be considered "expired", and future runs
will be allowed to disregard them and proceed. (Note that the --max-lock
duration must be set by the process that left the lock file -- not the
later one interpreting it.)

If set, bisync will also "renew" these lock files every
--max-lock minus one minute throughout a run, for extra safety. (For
example, with --max-lock 5m, bisync would renew the lock file (for
another 5 minutes) every 4 minutes until the run has completed.) In
other words, it should not be possible for a lock file to pass its
expiration time while the process that created it is still running --
and you can therefore be reasonably sure that any expired lock file you
may find was left there by an interrupted run, not one that is still
running and just taking awhile.

If a lock file exists but its contents are unreadable (for example, due
to an incomplete write or disk error), it is treated as expired when
--max-lock is set to a value greater than 0. If --max-lock is 0 or not
set, an unreadable lock file will produce an error and block future runs
until removed manually.

If --max-lock is 0 or not set, the default is that lock files will never
expire, and will block future runs (of these same two bisync paths)
indefinitely.

For maximum resilience from disruptions, consider setting a relatively
short duration like --max-lock 2m along with --resilient and --recover,
and a relatively frequent cron schedule. The result will be a very
robust "set-it-and-forget-it" bisync run that can automatically bounce
back from almost any interruption it might encounter, without requiring
the user to get involved and run a --resync. (See also: Graceful
Shutdown mode)

--backup-dir1 and --backup-dir2

As of v1.66, --backup-dir is supported in bisync. Because --backup-dir
must be a non-overlapping path on the same remote, Bisync has introduced
new --backup-dir1 and --backup-dir2 flags to support separate
backup-dirs for Path1 and Path2 (bisyncing between different remotes
with --backup-dir would not otherwise be possible.) --backup-dir1 and
--backup-dir2 can use different remotes from each other, but
--backup-dir1 must use the same remote as Path1, and --backup-dir2 must
use the same remote as Path2. Each backup directory must not overlap its
respective bisync Path without being excluded by a filter rule.

The standard --backup-dir will also work, if both paths use the same
remote (but note that deleted files from both paths would be mixed
together in the same dir). If either --backup-dir1 and --backup-dir2 are
set, they will override --backup-dir.

Example:

    rclone bisync /Users/someuser/some/local/path/Bisync gdrive:Bisync --backup-dir1 /Users/someuser/some/local/path/BackupDir --backup-dir2 gdrive:BackupDir --suffix -2023-08-26 --suffix-keep-extension --check-access --max-delete 10 --filters-file /Users/someuser/some/local/path/bisync_filters.txt --no-cleanup --ignore-listing-checksum --checkers=16 --drive-pacer-min-sleep=10ms --create-empty-src-dirs --resilient -MvP --drive-skip-gdocs --fix-case

In this example, if the user deletes a file in
/Users/someuser/some/local/path/Bisync, bisync will propagate the delete
to the other side by moving the corresponding file from gdrive:Bisync to
gdrive:BackupDir. If the user deletes a file from gdrive:Bisync, bisync
moves it from /Users/someuser/some/local/path/Bisync to
/Users/someuser/some/local/path/BackupDir.

In the event of a rename due to a sync conflict, the rename is not
considered a delete, unless a previous conflict with the same name
already exists and would get overwritten.

See also: --suffix, --suffix-keep-extension

Operation

Runtime flow details

bisync retains the listings of the Path1 and Path2 filesystems from the
prior run. On each successive run it will:

-   list files on path1 and path2, and check for changes on each side.
    Changes include New, Newer, Older, and Deleted files.
-   Propagate changes on path1 to path2, and vice-versa.

Safety measures

-   Lock file prevents multiple simultaneous runs when taking a while.
    This can be particularly useful if bisync is run by cron scheduler.
-   Handle change conflicts non-destructively by creating .conflict1,
    .conflict2, etc. file versions, according to --conflict-resolve,
    --conflict-loser, and --conflict-suffix settings.
-   File system access health check using RCLONE_TEST files (see the
    --check-access flag).
-   Abort on excessive deletes - protects against a failed listing being
    interpreted as all the files were deleted. See the --max-delete and
    --force flags.
-   If something evil happens, bisync goes into a safe state to block
    damage by later runs. (See Error Handling)

Normal sync checks

  ------------------------------------------------------------------------
  Type      Description                  Result          Implementation
  --------- ---------------------------- --------------- -----------------
  Path2 new File is new on Path2, does   Path2 version   rclone copy Path2
            not exist on Path1           survives        to Path1

  Path2     File is newer on Path2,      Path2 version   rclone copy Path2
  newer     unchanged on Path1           survives        to Path1

  Path2     File is deleted on Path2,    File is deleted rclone delete
  deleted   unchanged on Path1                           Path1

  Path1 new File is new on Path1, does   Path1 version   rclone copy Path1
            not exist on Path2           survives        to Path2

  Path1     File is newer on Path1,      Path1 version   rclone copy Path1
  newer     unchanged on Path2           survives        to Path2

  Path1     File is older on Path1,      Path1 version   rclone copy Path1
  older     unchanged on Path2           survives        to Path2

  Path2     File is older on Path2,      Path2 version   rclone copy Path2
  older     unchanged on Path1           survives        to Path1

  Path1     File no longer exists on     File is deleted rclone delete
  deleted   Path1                                        Path2
  ------------------------------------------------------------------------

Unusual sync checks

  ------------------------------------------------------------------------------
  Type              Description           Result               Implementation
  ----------------- --------------------- -------------------- -----------------
  Path1 new/changed File is new/changed   No change            None
  AND Path2         on Path1 AND                               
  new/changed AND   new/changed on Path2                       
  Path1 == Path2    AND Path1 version is                       
                    currently identical                        
                    to Path2                                   

  Path1 new AND     File is new on Path1  Conflicts handled    default:
  Path2 new         AND new on Path2 (and according to         rclone copy
                    Path1 version is NOT  --conflict-resolve & renamed
                    identical to Path2)   --conflict-loser     Path2.conflict2
                                          settings             file to Path1,
                                                               rclone copy
                                                               renamed
                                                               Path1.conflict1
                                                               file to Path2

  Path2 newer AND   File is newer on      Conflicts handled    default:
  Path1 changed     Path2 AND also        according to         rclone copy
                    changed               --conflict-resolve & renamed
                    (newer/older/size) on --conflict-loser     Path2.conflict2
                    Path1 (and Path1      settings             file to Path1,
                    version is NOT                             rclone copy
                    identical to Path2)                        renamed
                                                               Path1.conflict1
                                                               file to Path2

  Path2 newer AND   File is newer on      Path2 version        rclone copy Path2
  Path1 deleted     Path2 AND also        survives             to Path1
                    deleted on Path1                           

  Path2 deleted AND File is deleted on    Path1 version        rclone copy Path1
  Path1 changed     Path2 AND changed     survives             to Path2
                    (newer/older/size) on                      
                    Path1                                      

  Path1 deleted AND File is deleted on    Path2 version        rclone copy Path2
  Path2 changed     Path1 AND changed     survives             to Path1
                    (newer/older/size) on                      
                    Path2                                      
  ------------------------------------------------------------------------------

As of rclone v1.64, bisync is now better at detecting false positive
sync conflicts, which would previously have resulted in unnecessary
renames and duplicates. Now, when bisync comes to a file that it wants
to rename (because it is new/changed on both sides), it first checks
whether the Path1 and Path2 versions are currently identical (using the
same underlying function as check.) If bisync concludes that the files
are identical, it will skip them and move on. Otherwise, it will create
renamed duplicates, as before. This behavior also improves the
experience of renaming directories, as a --resync is no longer required,
so long as the same change has been made on both sides.

All files changed check

If all prior existing files on either of the filesystems have changed
(e.g. timestamps have changed due to changing the system's timezone)
then bisync will abort without making any changes. Any new files are not
considered for this check. You could use --force to force the sync
(whichever side has the changed timestamp files wins). Alternately, a
--resync may be used (Path1 versions will be pushed to Path2). Consider
the situation carefully and perhaps use --dry-run before you commit to
the changes.

Modification times

By default, bisync compares files by modification time and size. If you
or your application should change the content of a file without changing
the modification time and size, then bisync will not notice the change,
and thus will not copy it to the other side. As an alternative, consider
comparing by checksum (if your remotes support it). See --compare for
details.

Error handling

Certain bisync critical errors, such as file copy/move failing, will
result in a bisync lockout of following runs. The lockout is asserted
because the sync status and history of the Path1 and Path2 filesystems
cannot be trusted, so it is safer to block any further changes until
someone checks things out. The recovery is to do a --resync again.

It is recommended to use --resync --dry-run --verbose initially and
carefully review what changes will be made before running the --resync
without --dry-run.

Most of these events come up due to an error status from an internal
call. On such a critical error the {...}.path1.lst and {...}.path2.lst
listing files are renamed to extension .lst-err, which blocks any future
bisync runs (since the normal .lst files are not found). Bisync keeps
them under bisync subdirectory of the rclone cache directory, typically
at ${HOME}/.cache/rclone/bisync/ on Linux.

Some errors are considered temporary and re-running the bisync is not
blocked. The critical return blocks further bisync runs.

See also: --resilient, --recover, --max-lock, Graceful Shutdown

Lock file

When bisync is running, a lock file is created in the bisync working
directory, typically at ~/.cache/rclone/bisync/PATH1..PATH2.lck on
Linux. If bisync should crash or hang, the lock file will remain in
place and block any further runs of bisync for the same paths. Delete
the lock file as part of debugging the situation. The lock file
effectively blocks follow-on (e.g., scheduled by cron) runs when the
prior invocation is taking a long time. The lock file contains PID of
the blocking process, which may help in debug. Lock files can be set to
automatically expire after a certain amount of time, using the
--max-lock flag.

Note that while concurrent bisync runs are allowed, be very cautious
that there is no overlap in the trees being synched between concurrent
runs, lest there be replicated files, deleted files and general mayhem.

Exit codes

rclone bisync returns the following codes to calling program:

-   0 on a successful run,
-   1 for a non-critical failing run (a rerun may be successful),
-   2 on syntax or usage error,
-   7 for a critically aborted run (requires a --resync to recover).

See also the section about exit codes in main docs.

Graceful Shutdown

Bisync has a "Graceful Shutdown" mode which is activated by sending
SIGINT or pressing Ctrl+C during a run. Once triggered, bisync will use
best efforts to exit cleanly before the timer runs out. If bisync is in
the middle of transferring files, it will attempt to cleanly empty its
queue by finishing what it has started but not taking more. If it cannot
do so within 30 seconds, it will cancel the in-progress transfers at
that point and then give itself a maximum of 60 seconds to wrap up, save
its state for next time, and exit. With the -vP flags you will see
constant status updates and a final confirmation of whether or not the
graceful shutdown was successful.

At any point during the "Graceful Shutdown" sequence, a second SIGINT or
Ctrl+C will trigger an immediate, un-graceful exit, which will leave
things in a messier state. Usually a robust recovery will still be
possible if using --recover mode, otherwise you will need to do a
--resync.

If you plan to use Graceful Shutdown mode, it is recommended to use
--resilient and --recover, and it is important to NOT use --inplace,
otherwise you risk leaving partially-written files on one side, which
may be confused for real files on the next run. Note also that in the
event of an abrupt interruption, a lock file will be left behind to
block concurrent runs. You will need to delete it before you can proceed
with the next run (or wait for it to expire on its own, if using
--max-lock.)

Limitations

Supported backends

Bisync is integration-tested against all rclone backends to verify
compatibility. Most backends (including all backends not listed below)
are deemed fully supported with no known issues. Occasionally, however,
these tests reveal issues with particular backends, usually related to a
provider-specific limitation beyond rclone's control (for example,
disallowed special characters and filename encodings.)

The following backends have known issues that need more investigation:

-   TestFilen (filen)
    -   TestBisyncRemoteRemote/resync_modes
    -   TestBisyncRemoteRemote/rmdirs
-   TestHuaweiDrive (huaweidrive)
    -   TestBisyncRemoteLocal/ext_paths
    -   TestBisyncRemoteLocal/extended_filenames
    -   TestBisyncRemoteLocal/normalization
    -   TestBisyncLocalRemote/ext_paths
    -   TestBisyncLocalRemote/extended_filenames
    -   4 more
-   TestSeafile (seafile)
    -   TestBisyncLocalRemote/rmdirs
-   Updated: 2026-06-05-010010

The following backends either have not been tested recently or have
known issues that are deemed unfixable for the time being:

-   TestArchive (archive)
-   TestCache (cache)
-   TestDrime (drime)
-   TestFileLu (filelu)
-   TestFilesCom (filescom)
-   TestImageKit (imagekit)
-   TestJottacloud (jottacloud)
-   TestLinkbox (linkbox)
-   TestMailru (mailru)
-   TestMega (mega)
-   TestOpenDrive (opendrive)
-   TestOracleObjectStorage (oracleobjectstorage)
-   TestPikPak (pikpak)
-   TestPixeldrain (pixeldrain)
-   TestProtonDrive (protondrive)
-   TestPutio (putio)
-   TestQuatrix (quatrix)
-   TestS3GCS (s3)
    -   TestBisyncRemoteRemote/extended_filenames
-   TestS3Rclone (s3)
-   TestSFTPRsyncNet (sftp)
-   TestStorj (storj)
-   TestWebdavInfiniteScale (webdav)
-   TestWebdavNextcloud (webdav)
-   TestWebdavOwncloud (webdav)
-   TestnStorage (netstorage) (more info)

The above lists are updated for each stable release of rclone. For test
results updated nightly based on the latest beta, visit rclone's
integration test status page.

Early beta versions of rclone bisync required both underlying backends
to support modification times, and refused to run otherwise. This
limitation has been lifted as of v1.66, as bisync now supports comparing
checksum and/or size instead of (or in addition to) modtime. See
--compare for details.

Concurrent modifications

When using Local, FTP or SFTP remotes with --inplace, rclone does not
create temporary files at the destination when copying, and thus if the
connection is lost the created file may be corrupt, which will likely
propagate back to the original path on the next sync, resulting in data
loss. It is therefore recommended to omit --inplace.

Files that change during a bisync run may result in data loss. Prior to
rclone v1.66, this was commonly seen in highly dynamic environments,
where the filesystem was getting hammered by running processes during
the sync. As of rclone v1.66, bisync was redesigned to use a "snapshot"
model, greatly reducing the risks from changes during a sync. Changes
that are not detected during the current sync will now be detected
during the following sync, and will no longer cause the entire run to
throw a critical error. There is additionally a mechanism to mark files
as needing to be internally rechecked next time, for added safety. It
should therefore no longer be necessary to sync only at quiet times --
however, note that an error can still occur if a file happens to change
at the exact moment it's being read/written by bisync (same as would
happen in rclone sync.) (See also: --ignore-checksum,
--local-no-check-updated)

Empty directories

By default, new/deleted empty directories on one path are not propagated
to the other side. This is because bisync (and rclone) natively works on
files, not directories. However, this can be changed with the
--create-empty-src-dirs flag, which works in much the same way as in
sync and copy. When used, empty directories created or deleted on one
side will also be created or deleted on the other side. The following
should be noted:

-   --create-empty-src-dirs is not compatible with --remove-empty-dirs.
    Use only one or the other (or neither).
-   It is not recommended to switch back and forth between
    --create-empty-src-dirs and the default (no --create-empty-src-dirs)
    without running -- resync. This is because it may appear as though
    all directories (not just the empty ones) were created/deleted, when
    actually you've just toggled between making them visible/invisible
    to bisync. It looks scarier than it is, but it's still probably best
    to stick to one or the other, and use --resync when you need to
    switch.

Renamed directories

By default, renaming a folder on the Path1 side results in deleting all
files on the Path2 side and then copying all files again from Path1 to
Path2. Bisync sees this as all files in the old directory name as
deleted and all files in the new directory name as new.

A recommended solution is to use --track-renames, which is now supported
in bisync as of rclone v1.66. Note that --track-renames is not available
during --resync, as --resync does not delete anything (--track-renames
only supports sync, not copy.)

Otherwise, the most effective and efficient method of renaming a
directory is to rename it to the same name on both sides. (As of
rclone v1.64, a --resync is no longer required after doing so, as bisync
will automatically detect that Path1 and Path2 are in agreement.)

--fast-list used by default

Unlike most other rclone commands, bisync uses --fast-list by default,
for backends that support it. In many cases this is desirable, however,
there are some scenarios in which bisync could be faster without
--fast-list, and there is also a known issue concerning Google Drive
users with many empty directories. For now, the recommended way to avoid
using --fast-list is to add --disable ListR to all bisync commands. The
default behavior may change in a future version.

Case (and unicode) sensitivity

As of v1.66, case and unicode form differences no longer cause critical
errors, and normalization (when comparing between filesystems) is
handled according to the same flags and defaults as rclone sync. See the
following options (all of which are supported by bisync) to control this
behavior more granularly:

-   --fix-case
-   --ignore-case-sync
-   --no-unicode-normalization
-   --local-unicode-normalization and --local-case-sensitive (caution:
    these are normally not what you want.)

Note that in the (probably rare) event that --fix-case is used AND a
file is new/changed on both sides AND the checksums match AND the
filename case does not match, the Path1 filename is considered the
winner, for the purposes of --fix-case (Path2 will be renamed to match
it).

Windows support

Bisync has been tested on Windows 8.1, Windows 10 Pro 64-bit and on
Windows GitHub runners.

Drive letters are allowed, including drive letters mapped to network
drives (rclone bisync J:\localsync GDrive:). If a drive letter is
omitted, the shell current drive is the default. Drive letters are a
single character follows by :, so cloud names must be more than one
character long.

Absolute paths (with or without a drive letter), and relative paths
(with or without a drive letter) are supported.

Working directory is created at
C:\Users\MyLogin\AppData\Local\rclone\bisync.

Note that bisync output may show a mix of forward / and back \ slashes.

Be careful of case independent directory and file naming on Windows vs.
case dependent Linux

Filtering

See filtering documentation for how filter rules are written and
interpreted.

Bisync's --filters-file flag slightly extends the rclone's --filter-from
filtering mechanism. For a given bisync run you may provide only one
--filters-file. The --include*, --exclude*, and --filter flags are also
supported.

How to filter directories

Filtering portions of the directory tree is a critical feature for
syncing.

Examples of directory trees (always beneath the Path1/Path2 root level)
you may want to exclude from your sync:

-   Directory trees containing only software build intermediate files.
-   Directory trees containing application temporary files and data such
    as the Windows C:\Users\MyLogin\AppData\ tree.
-   Directory trees containing files that are large, less important, or
    are getting thrashed continuously by ongoing processes.

On the other hand, there may be only select directories that you
actually want to sync, and exclude all others. See the Example
include-style filters for Windows user directories below.

Filters file writing guidelines

1.  Begin with excluding directory trees:
    -   e.g. - /AppData/
    -   ** on the end is not necessary. Once a given directory level is
        excluded then everything beneath it won't be looked at by
        rclone.
    -   Exclude such directories that are unneeded, are big, dynamically
        thrashed, or where there may be access permission issues.
    -   Excluding such dirs first will make rclone operations (much)
        faster.
    -   Specific files may also be excluded, as with the Dropbox
        exclusions example below.
2.  Decide if it's easier (or cleaner) to:
    -   Include select directories and therefore exclude everything else
        -- or --
    -   Exclude select directories and therefore include everything else
3.  Include select directories:
    -   Add lines like: + /Documents/PersonalFiles/** to select which
        directories to include in the sync.
    -   ** on the end specifies to include the full depth of the
        specified tree.
    -   With Include-style filters, files at the Path1/Path2 root are
        not included. They may be included with + /*.
    -   Place RCLONE_TEST files within these included directory trees.
        They will only be looked for in these directory trees.
    -   Finish by excluding everything else by adding - ** at the end of
        the filters file.
    -   Disregard step 4.
4.  Exclude select directories:
    -   Add more lines like in step 1. For example:
        -/Desktop/tempfiles/, or - /testdir/. Again, a ** on the end is
        not necessary.
    -   Do not add a - ** in the file. Without this line, everything
        will be included that has not been explicitly excluded.
    -   Disregard step 3.

A few rules for the syntax of a filter file expanding on filtering
documentation:

-   Lines may start with spaces and tabs - rclone strips leading
    whitespace.
-   If the first non-whitespace character is a # then the line is a
    comment and will be ignored.
-   Blank lines are ignored.
-   The first non-whitespace character on a filter line must be a + or
    -.
-   Exactly 1 space is allowed between the +/- and the path term.
-   Only forward slashes (/) are used in path terms, even on Windows.
-   The rest of the line is taken as the path term. Trailing whitespace
    is taken literally, and probably is an error.

Example include-style filters for Windows user directories

This Windows include-style example is based on the sync root (Path1) set
to C:\Users\MyLogin. The strategy is to select specific directories to
be synched with a network drive (Path2).

-   - /AppData/ excludes an entire tree of Windows stored stuff that
    need not be synched. In my case, AppData has >11 GB of stuff I don't
    care about, and there are some subdirectories beneath AppData that
    are not accessible to my user login, resulting in bisync critical
    aborts.
-   Windows creates cache files starting with both upper and lowercase
    NTUSER at C:\Users\MyLogin. These files may be dynamic, locked, and
    are generally don't care.
-   There are just a few directories with my data that I do want
    synched, in the form of + /<path>. By selecting only the directory
    trees I want to avoid the dozen plus directories that various apps
    make at C:\Users\MyLogin\Documents.
-   Include files in the root of the sync point, C:\Users\MyLogin, by
    adding the + /* line.
-   This is an Include-style filters file, therefore it ends with - **
    which excludes everything not explicitly included.

    - /AppData/
    - NTUSER*
    - ntuser*
    + /Documents/Family/**
    + /Documents/Sketchup/**
    + /Documents/Microcapture_Photo/**
    + /Documents/Microcapture_Video/**
    + /Desktop/**
    + /Pictures/**
    + /*
    - **

Note also that Windows implements several "library" links such as
C:\Users\MyLogin\My Documents\My Music pointing to
C:\Users\MyLogin\Music. rclone sees these as links, so you must add
--links to the bisync command line if you which to follow these links. I
find that I get permission errors in trying to follow the links, so I
don't include the rclone --links flag, but then you get lots of
Can't follow symlink… noise from rclone about not following the links.
This noise can be quashed by adding --quiet to the bisync command line.

Example exclude-style filters files for use with Dropbox

-   Dropbox disallows syncing the listed temporary and
    configuration/data files. The - <filename> filters exclude these
    files where ever they may occur in the sync tree. Consider adding
    similar exclusions for file types you don't need to sync, such as
    core dump and software build files.
-   bisync testing creates /testdir/ at the top level of the sync tree,
    and usually deletes the tree after the test. If a normal sync should
    run while the /testdir/ tree exists the --check-access phase may
    fail due to unbalanced RCLONE_TEST files. The - /testdir/ filter
    blocks this tree from being synched. You don't need this exclusion
    if you are not doing bisync development testing.
-   Everything else beneath the Path1/Path2 root will be synched.
-   RCLONE_TEST files may be placed anywhere within the tree, including
    the root.

Example filters file for Dropbox

    # Filter file for use with bisync
    # See https://rclone.org/filtering/ for filtering rules
    # NOTICE: If you make changes to this file you MUST do a --resync run.
    #         Run with --dry-run to see what changes will be made.

    # Dropbox won't sync some files so filter them away here.
    # See https://help.dropbox.com/installs-integrations/sync-uploads/files-not-syncing
    - .dropbox.attr
    - ~*.tmp
    - ~$*
    - .~*
    - desktop.ini
    - .dropbox

    # Used for bisync testing, so excluded from normal runs
    - /testdir/

    # Other example filters
    #- /TiBU/
    #- /Photos/

How --check-access handles filters

At the start of a bisync run, listings are gathered for Path1 and Path2
while using the user's --filters-file. During the check access phase,
bisync scans these listings for RCLONE_TEST files. Any RCLONE_TEST files
hidden by the --filters-file are not in the listings and thus not
checked during the check access phase.

Troubleshooting

Reading bisync logs

Here are two normal runs. The first one has a newer file on the remote.
The second has no deltas between local and remote.

    2021/05/16 00:24:38 INFO  : Synching Path1 "/path/to/local/tree/" with Path2 "dropbox:/"
    2021/05/16 00:24:38 INFO  : Path1 checking for diffs
    2021/05/16 00:24:38 INFO  : - Path1    File is new                         - file.txt
    2021/05/16 00:24:38 INFO  : Path1:    1 changes:    1 new,    0 newer,    0 older,    0 deleted
    2021/05/16 00:24:38 INFO  : Path2 checking for diffs
    2021/05/16 00:24:38 INFO  : Applying changes
    2021/05/16 00:24:38 INFO  : - Path1    Queue copy to Path2                 - dropbox:/file.txt
    2021/05/16 00:24:38 INFO  : - Path1    Do queued copies to                 - Path2
    2021/05/16 00:24:38 INFO  : Updating listings
    2021/05/16 00:24:38 INFO  : Validating listings for Path1 "/path/to/local/tree/" vs Path2 "dropbox:/"
    2021/05/16 00:24:38 INFO  : Bisync successful

    2021/05/16 00:36:52 INFO  : Synching Path1 "/path/to/local/tree/" with Path2 "dropbox:/"
    2021/05/16 00:36:52 INFO  : Path1 checking for diffs
    2021/05/16 00:36:52 INFO  : Path2 checking for diffs
    2021/05/16 00:36:52 INFO  : No changes found
    2021/05/16 00:36:52 INFO  : Updating listings
    2021/05/16 00:36:52 INFO  : Validating listings for Path1 "/path/to/local/tree/" vs Path2 "dropbox:/"
    2021/05/16 00:36:52 INFO  : Bisync successful

Dry run oddity

The --dry-run messages may indicate that it would try to delete some
files. For example, if a file is new on Path2 and does not exist on
Path1 then it would normally be copied to Path1, but with --dry-run
enabled those copies don't happen, which leads to the attempted delete
on Path2, blocked again by --dry-run: ... Not deleting as --dry-run.

This whole confusing situation is an artifact of the --dry-run flag.
Scrutinize the proposed deletes carefully, and if the files would have
been copied to Path1 then the threatened deletes on Path2 may be
disregarded.

Retries

Rclone has built-in retries. If you run with --verbose you'll see error
and retry messages such as shown below. This is usually not a bug. If at
the end of the run, you see Bisync successful and not
Bisync critical error or Bisync aborted then the run was successful, and
you can ignore the error messages.

The following run shows an intermittent fail. Lines 5 and 6 are
low-level messages. Line 6 is a bubbled-up warning message, conveying
the error. Rclone normally retries failing commands, so there may be
numerous such messages in the log.

Since there are no final error/warning messages on line 7, rclone has
recovered from failure after a retry, and the overall sync was
successful.

    1: 2021/05/14 00:44:12 INFO  : Synching Path1 "/path/to/local/tree" with Path2 "dropbox:"
    2: 2021/05/14 00:44:12 INFO  : Path1 checking for diffs
    3: 2021/05/14 00:44:12 INFO  : Path2 checking for diffs
    4: 2021/05/14 00:44:12 INFO  : Path2:  113 changes:   22 new,    0 newer,    0 older,   91 deleted
    5: 2021/05/14 00:44:12 ERROR : /path/to/local/tree/objects/af: error listing: unexpected end of JSON input
    6: 2021/05/14 00:44:12 NOTICE: WARNING  listing try 1 failed.                 - dropbox:
    7: 2021/05/14 00:44:12 INFO  : Bisync successful

This log shows a Critical failure which requires a --resync to recover
from. See the Runtime Error Handling section.

    2021/05/12 00:49:40 INFO  : Google drive root '': Waiting for checks to finish
    2021/05/12 00:49:40 INFO  : Google drive root '': Waiting for transfers to finish
    2021/05/12 00:49:40 INFO  : Google drive root '': not deleting files as there were IO errors
    2021/05/12 00:49:40 ERROR : Attempt 3/3 failed with 3 errors and: not deleting files as there were IO errors
    2021/05/12 00:49:40 ERROR : Failed to sync: not deleting files as there were IO errors
    2021/05/12 00:49:40 NOTICE: WARNING  rclone sync try 3 failed.           - /path/to/local/tree/
    2021/05/12 00:49:40 ERROR : Bisync aborted. Must run --resync to recover.

Denied downloads of "infected" or "abusive" files

Google Drive has a filter for certain file types (.exe, .apk, et cetera)
that by default cannot be copied from Google Drive to the local
filesystem. If you are having problems, run with --verbose to see
specifically which files are generating complaints. If the error is
This file has been identified as malware or spam and cannot be downloaded,
consider using the flag --drive-acknowledge-abuse.

Google Docs (and other files of unknown size)

As of v1.66, Google Docs (including Google Sheets, Slides, etc.) are now
supported in bisync, subject to the same options, defaults, and
limitations as in rclone sync. When bisyncing drive with non-drive
backends, the drive -> non-drive direction is controlled by
--drive-export-formats (default "docx,xlsx,pptx,svg") and the non-drive
-> drive direction is controlled by --drive-import-formats (default
none.)

For example, with the default export/import formats, a Google Sheet on
the drive side will be synced to an .xlsx file on the non-drive side. In
the reverse direction, .xlsx files with filenames that match an existing
Google Sheet will be synced to that Google Sheet, while .xlsx files that
do NOT match an existing Google Sheet will be copied to drive as normal
.xlsx files (without conversion to Sheets, although the Google Drive web
browser UI may still give you the option to open it as one.)

If --drive-import-formats is set (it's not, by default), then all of the
specified formats will be converted to Google Docs, if there is no
existing Google Doc with a matching name. Caution: such conversion can
be quite lossy, and in most cases it's probably not what you want!

To bisync Google Docs as URL shortcut links (in a manner similar to
"Drive for Desktop"), use: --drive-export-formats url (or alternatives.)

Note that these link files cannot be edited on the non-drive side -- you
will get errors if you try to sync an edited link file back to drive.
They CAN be deleted (it will result in deleting the corresponding Google
Doc.) If you create a .url file on the non-drive side that does not
match an existing Google Doc, bisyncing it will just result in copying
the literal .url file over to drive (no Google Doc will be created.) So,
as a general rule of thumb, think of them as read-only placeholders on
the non-drive side, and make all your changes on the drive side.

Likewise, even with other export-formats, it is best to only move/rename
Google Docs on the drive side. This is because otherwise, bisync will
interpret this as a file deleted and another created, and accordingly,
it will delete the Google Doc and create a new file at the new path.
(Whether or not that new file is a Google Doc depends on
--drive-import-formats.)

Lastly, take note that all Google Docs on the drive side have a size of
-1 and no checksum. Therefore, they cannot be reliably synced with the
--checksum or --size-only flags. (To be exact: they will still get
created/deleted, and bisync's delta engine will notice changes and queue
them for syncing, but the underlying sync function will consider them
identical and skip them.) To work around this, use the default (modtime
and size) instead of --checksum or --size-only.

To ignore Google Docs entirely, use --drive-skip-gdocs.

Usage examples

Cron

Rclone does not yet have a built-in capability to monitor the local file
system for changes and must be blindly run periodically. On Windows this
can be done using a Task Scheduler, on Linux you can use Cron which is
described below.

The 1st example runs a sync every 5 minutes between a local directory
and an OwnCloud server, with output logged to a runlog file:

    # Minute (0-59)
    #      Hour (0-23)
    #           Day of Month (1-31)
    #                Month (1-12 or Jan-Dec)
    #                     Day of Week (0-6 or Sun-Sat)
    #                         Command
      */5  *    *    *    *   /path/to/rclone bisync /local/files MyCloud: --check-access --filters-file /path/to/bysync-filters.txt --log-file /path/to//bisync.log

See crontab syntax for the details of crontab time interval expressions.

If you run rclone bisync as a cron job, redirect stdout/stderr to a
file. The 2nd example runs a sync to Dropbox every hour and logs all
stdout (via the >>) and stderr (via 2>&1) to a log file.

    0 * * * * /path/to/rclone bisync /path/to/local/dropbox Dropbox: --check-access --filters-file /home/user/filters.txt >> /path/to/logs/dropbox-run.log 2>&1

Sharing an encrypted folder tree between hosts

bisync can keep a local folder in sync with a cloud service, but what if
you have some highly sensitive files to be synched?

Usage of a cloud service is for exchanging both routine and sensitive
personal files between one's home network, one's personal notebook when
on the road, and with one's work computer. The routine data is not
sensitive. For the sensitive data, configure an rclone crypt remote to
point to a subdirectory within the local disk tree that is bisync'd to
Dropbox, and then set up an bisync for this local crypt directory to a
directory outside of the main sync tree.

Linux server setup

-   /path/to/DBoxroot is the root of my local sync tree. There are
    numerous subdirectories.
-   /path/to/DBoxroot/crypt is the root subdirectory for files that are
    encrypted. This local directory target is setup as an rclone crypt
    remote named Dropcrypt:. See rclone.conf snippet below.
-   /path/to/my/unencrypted/files is the root of my sensitive files -
    not encrypted, not within the tree synched to Dropbox.
-   To sync my local unencrypted files with the encrypted Dropbox
    versions I manually run
    bisync /path/to/my/unencrypted/files DropCrypt:. This step could be
    bundled into a script to run before and after the full Dropbox tree
    sync in the last step, thus actively keeping the sensitive files in
    sync.
-   bisync /path/to/DBoxroot Dropbox: runs periodically via cron,
    keeping my full local sync tree in sync with Dropbox.

Windows notebook setup

-   The Dropbox client runs keeping the local tree
    C:\Users\MyLogin\Dropbox always in sync with Dropbox. I could have
    used rclone bisync instead.
-   A separate directory tree at C:\Users\MyLogin\Documents\DropLocal
    hosts the tree of unencrypted files/folders.
-   To sync my local unencrypted files with the encrypted Dropbox
    versions I manually run the following command:
    rclone bisync C:\Users\MyLogin\Documents\DropLocal Dropcrypt:.
-   The Dropbox client then syncs the changes with Dropbox.

rclone.conf snippet

    [Dropbox]
    type = dropbox
    ...

    [Dropcrypt]
    type = crypt
    remote = /path/to/DBoxroot/crypt          # on the Linux server
    remote = C:\Users\MyLogin\Dropbox\crypt   # on the Windows notebook
    filename_encryption = standard
    directory_name_encryption = true
    password = ...
    ...

Testing

You should read this section only if you are developing for rclone. You
need to have rclone source code locally to work with bisync tests.

Bisync has a dedicated test framework implemented in the bisync_test.go
file located in the rclone source tree. The test suite is based on the
go test command. Series of tests are stored in subdirectories below the
cmd/bisync/testdata directory. Individual tests can be invoked by their
directory name, e.g.
go test . -case basic -remote local -remote2 gdrive: -v

Tests will make a temporary folder on remote and purge it afterwards. If
during test run there are intermittent errors and rclone retries, these
errors will be captured and flagged as invalid MISCOMPAREs. Rerunning
the test will let it pass. Consider such failures as noise.

Test command syntax

    usage: go test ./cmd/bisync [options...]

    Options:
      -case NAME        Name(s) of the test case(s) to run. Multiple names should
                        be separated by commas. You can remove the `test_` prefix
                        and replace `_` by `-` in test name for convenience.
                        If not `all`, the name(s) should map to a directory under
                        `./cmd/bisync/testdata`.
                        Use `all` to run all tests (default: all)
      -remote PATH1     `local` or name of cloud service with `:` (default: local)
      -remote2 PATH2    `local` or name of cloud service with `:` (default: local)
      -no-compare       Disable comparing test results with the golden directory
                        (default: compare)
      -no-cleanup       Disable cleanup of Path1 and Path2 testdirs.
                        Useful for troubleshooting. (default: cleanup)
      -golden           Store results in the golden directory (default: false)
                        This flag can be used with multiple tests.
      -debug            Print debug messages
      -stop-at NUM      Stop test after given step number. (default: run to the end)
                        Implies `-no-compare` and `-no-cleanup`, if the test really
                        ends prematurely. Only meaningful for a single test case.
      -refresh-times    Force refreshing the target modtime, useful for Dropbox
                        (default: false)
      -verbose          Run tests verbosely

Note: unlike rclone flags which must be prefixed by double dash (--),
the test command flags can be equally prefixed by a single - or double
dash.

Running tests

-   go test . -case basic -remote local -remote2 local runs the
    test_basic test case using only the local filesystem, syncing one
    local directory with another local directory. Test script output is
    to the console, while commands within scenario.txt have their output
    sent to the .../workdir/test.log file, which is finally compared to
    the golden copy.
-   The first argument after go test should be a relative name of the
    directory containing bisync source code. If you run tests right from
    there, the argument will be . (current directory) as in most
    examples below. If you run bisync tests from the rclone source
    directory, the command should be go test ./cmd/bisync ....
-   The test engine will mangle rclone output to ensure comparability
    with golden listings and logs.
-   Test scenarios are located in ./cmd/bisync/testdata. The test -case
    argument should match the full name of a subdirectory under that
    directory. Every test subdirectory name on disk must start with
    test_, this prefix can be omitted on command line for brevity. Also,
    underscores in the name can be replaced by dashes for convenience.
-   go test . -remote local -remote2 local -case all runs all tests.
-   Path1 and Path2 may either be the keyword local or may be names of
    configured cloud services.
    go test . -remote gdrive: -remote2 dropbox: -case basic will run the
    test between these two services, without transferring any files to
    the local filesystem.
-   Test run stdout and stderr console output may be directed to a file,
    e.g.
    go test . -remote gdrive: -remote2 local -case all > runlog.txt 2>&1

Test execution flow

1.  The base setup in the initial directory of the testcase is applied
    on the Path1 and Path2 filesystems (via rclone copy the initial
    directory to Path1, then rclone sync Path1 to Path2).
2.  The commands in the scenario.txt file are applied, with output
    directed to the test.log file in the test working directory.
    Typically, the first actual command in the scenario.txt file is to
    do a --resync, which establishes the baseline {...}.path1.lst and
    {...}.path2.lst files in the test working directory (.../workdir/
    relative to the temporary test directory). Various commands and
    listing snapshots are done within the test.
3.  Finally, the contents of the test working directory are compared to
    the contents of the testcase's golden directory.

Notes about testing

-   Test cases are in individual directories beneath
    ./cmd/bisync/testdata. A command line reference to a test is
    understood to reference a directory beneath testdata. For example,
    go test ./cmd/bisync -case dry-run -remote gdrive: -remote2 local
    refers to the test case in ./cmd/bisync/testdata/test_dry_run.
-   The test working directory is located at .../workdir relative to a
    temporary test directory, usually under /tmp on Linux.
-   The local test sync tree is created at a temporary directory named
    like bisync.XXX under system temporary directory.
-   The remote test sync tree is located at a temporary directory under
    <remote:>/bisync.XXX/.
-   path1 and/or path2 subdirectories are created in a temporary
    directory under the respective local or cloud test remote.
-   By default, the Path1 and Path2 test dirs and workdir will be
    deleted after each test run. The -no-cleanup flag disables purging
    these directories when validating and debugging a given test. These
    directories will be flushed before running another test, independent
    of the -no-cleanup usage.
-   You will likely want to add - /testdir/ to your normal bisync
    --filters-file so that normal syncs do not attempt to sync the test
    temporary directories, which may have RCLONE_TEST miscompares in
    some testcases which would otherwise trip the --check-access system.
    The --check-access mechanism is hard-coded to ignore RCLONE_TEST
    files beneath bisync/testdata, so the test cases may reside on the
    synched tree even if there are check file mismatches in the test
    tree.
-   Some Dropbox tests can fail, notably printing the following message:
    src and dst identical but can't set mod time without deleting and re-uploading
    This is expected and happens due to the way Dropbox handles
    modification times. You should use the -refresh-times test flag to
    make up for this.
-   If Dropbox tests hit request limit for you and print error message
    too_many_requests/...: Too many requests or write operations. then
    follow the Dropbox App ID instructions.

Updating golden results

Sometimes even a slight change in the bisync source can cause little
changes spread around many log files. Updating them manually would be a
nightmare.

The -golden flag will store the test.log and *.lst listings from each
test case into respective golden directories. Golden results will
automatically contain generic strings instead of local or cloud paths
which means that they should match when run with a different cloud
service.

Your normal workflow might be as follows:

1.  Git-clone the rclone sources locally
2.  Modify bisync source and check that it builds
3.  Run the whole test suite go test ./cmd/bisync -remote local
4.  If some tests show log difference, recheck them individually, e.g.:
    go test ./cmd/bisync -remote local -case basic
5.  If you are convinced with the difference, goldenize all tests at
    once: go test ./cmd/bisync -remote local -golden
6.  Use word diff: git diff --word-diff ./cmd/bisync/testdata/. Please
    note that normal line-level diff is generally useless here.
7.  Check the difference carefully!
8.  Commit the change (git commit) only if you are sure. If unsure, save
    your code changes then wipe the log diffs from git:
    git reset [--hard].

Structure of test scenarios

-   <testname>/initial/ contains a tree of files that will be set as the
    initial condition on both Path1 and Path2 testdirs.
-   <testname>/modfiles/ contains files that will be used to modify the
    Path1 and/or Path2 filesystems.
-   <testname>/golden/ contains the expected content of the test working
    directory (workdir) at the completion of the testcase.
-   <testname>/scenario.txt contains the body of the test, in the form
    of various commands to modify files, run bisync, and snapshot
    listings. Output from these commands is captured to
    .../workdir/test.log for comparison to the golden files.

Supported test commands

-   test <some message> Print the line to the console and to the
    test.log: test sync is working correctly with options x, y, z
-   copy-listings <prefix> Save a copy of all .lst listings in the test
    working directory with the specified prefix:
    save-listings exclude-pass-run
-   move-listings <prefix> Similar to copy-listings but removes the
    source
-   purge-children <dir> This will delete all child files and purge all
    child subdirs under given directory but keep the parent intact. This
    behavior is important for tests with Google Drive because removing
    and re-creating the parent would change its ID.
-   delete-file <file> Delete a single file.
-   delete-glob <dir> <pattern> Delete a group of files located one
    level deep in the given directory with names matching a given glob
    pattern.
-   touch-glob YYYY-MM-DD <dir> <pattern> Change modification time on a
    group of files.
-   touch-copy YYYY-MM-DD <source-file> <dest-dir> Change file
    modification time then copy it to destination.
-   copy-file <source-file> <dest-dir> Copy a single file to given
    directory.
-   copy-as <source-file> <dest-file> Similar to above but destination
    must include both directory and the new file name at destination.
-   copy-dir <src> <dst> and sync-dir <src> <dst> Copy/sync a directory.
    Equivalent of rclone copy and rclone sync.
-   list-dirs <dir> Equivalent to rclone lsf -R --dirs-only <dir>
-   bisync [options] Runs bisync against -remote and -remote2.

Supported substitution terms

-   {testdir/} - the root dir of the testcase
-   {datadir/} - the modfiles dir under the testcase root
-   {workdir/} - the temporary test working directory
-   {path1/} - the root of the Path1 test directory tree
-   {path2/} - the root of the Path2 test directory tree
-   {session} - base name of the test listings
-   {/} - OS-specific path separator
-   {spc}, {tab}, {eol} - whitespace
-   {chr:HH} - raw byte with given hexadecimal code

Substitution results of the terms named like {dir/} will end with / (or
backslash on Windows), so it is not necessary to include slash in the
usage, for example delete-file {path1/}file1.txt.

Benchmarks

This section is work in progress.

Here are a few data points for scale, execution times, and memory usage.

The first set of data was taken between a local disk to Dropbox. The
speedtest.net download speed was ~170 Mbps, and upload speed was ~10
Mbps. 500 files (~9.5 MB each) had been already synched. 50 files were
added in a new directory, each ~9.5 MB, ~475 MB total.

  ------------------------------------------------------------------------
  Change                   Operations and times                Overall run
                                                               time
  ------------------------ ----------------------------------- -----------
  500 files synched        1x listings for Path1 & Path2       1.5 sec
  (nothing to move)                                            

  500 files synched with   1x listings for Path1 & Path2       1.5 sec
  --check-access                                               

  50 new files on remote   Queued 50 copies down: 27 sec       29 sec

  Moved local dir          Queued 50 copies up: 410 sec, 50    421 sec
                           deletes up: 9 sec                   

  Moved remote dir         Queued 50 copies down: 31 sec, 50   33 sec
                           deletes down: <1 sec                

  Delete local dir         Queued 50 deletes up: 9 sec         13 sec
  ------------------------------------------------------------------------

This next data is from a user's application. They had ~400GB of data
over 1.96 million files being sync'ed between a Windows local disk and
some remote cloud. The file full path length was on average 35
characters (which factors into load time and RAM required).

-   Loading the prior listing into memory (1.96 million files, listing
    file size 140 MB) took ~30 sec and occupied about 1 GB of RAM.
-   Getting a fresh listing of the local file system (producing the 140
    MB output file) took about XXX sec.
-   Getting a fresh listing of the remote file system (producing the 140
    MB output file) took about XXX sec. The network download speed was
    measured at XXX Mb/s.
-   Once the prior and current Path1 and Path2 listings were loaded (a
    total of four to be loaded, two at a time), determining the deltas
    was pretty quick (a few seconds for this test case), and the
    transfer time for any files to be copied was dominated by the
    network bandwidth.

References

rclone's bisync implementation was derived from the rclonesync-V2
project, including documentation and test mechanisms, with @cjnaz's full
support and encouragement.

rclone bisync is similar in nature to a range of other projects:

-   unison
-   syncthing
-   cjnaz/rclonesync
-   ConorWilliams/rsinc
-   jwink3101/syncrclone
-   DavideRossi/upback

Bisync adopts the differential synchronization technique, which is based
on keeping history of changes performed by both synchronizing sides. See
the Dual Shadow Method section in Neil Fraser's article.

Also note a number of academic publications by Benjamin Pierce about
Unison and synchronization in general.

Changelog

v1.74.2

-   Fixed an issue causing --conflict-loser pathname to produce
    unexpected behavior if using a non-default --conflict-resolve value.

v1.74

-   Added several missing rc parameters.
-   Optional rc parameters are now truly optional.
-   rc output now provides more structured information.

v1.71

-   bisync is now officially released from beta.

-   Fixed an issue causing hash type to be set incorrectly if path2 had
    slow hashes and --no-slow-hash or --slow-hash-sync-only was in use.

-   Fixed an issue causing errors when running concurrent bisync runs
    through the rc.

v1.69.1

-   Fixed an issue causing listings to not capture concurrent
    modifications under certain conditions

v1.68

-   Fixed an issue affecting backends that round modtimes to a lower
    precision.

v1.67

-   Added integration tests against all backends.

v1.66

-   Copies and deletes are now handled in one operation instead of two

-   --track-renames and --backup-dir are now supported

-   Partial uploads known issue on local/ftp/sftp has been resolved
    (unless using --inplace)

-   Final listings are now generated from sync results, to avoid needing
    to re-list

-   Bisync is now much more resilient to changes that happen during a
    bisync run, and far less prone to critical errors / undetected
    changes

-   Bisync is now capable of rolling a file listing back in cases of
    uncertainty, essentially marking the file as needing to be rechecked
    next time.

-   A few basic terminal colors are now supported, controllable with
    --color (AUTO|NEVER|ALWAYS)

-   Initial listing snapshots of Path1 and Path2 are now generated
    concurrently, using the same "march" infrastructure as check and
    sync, for performance improvements and less risk of error.

-   Fixed handling of unicode normalization and case insensitivity,
    support for --fix-case, --ignore-case-sync,
    --no-unicode-normalization

-   --resync is now much more efficient (especially for users of
    --create-empty-src-dirs)

-   Google Docs (and other files of unknown size) are now supported
    (with the same options as in sync)

-   Equality checks before a sync conflict rename now fall back to
    cryptcheck (when possible) or --download, instead of of --size-only,
    when check is not available.

-   Bisync no longer fails to find the correct listing file when configs
    are overridden with backend-specific flags.

-   Bisync now fully supports comparing based on any combination of
    size, modtime, and checksum, lifting the prior restriction on
    backends without modtime support.

-   Bisync now supports a "Graceful Shutdown" mode to cleanly cancel a
    run early without requiring --resync.

-   New --recover flag allows robust recovery in the event of
    interruptions, without requiring --resync.

-   A new --max-lock setting allows lock files to automatically renew
    and expire, for better automatic recovery when a run is interrupted.

-   Bisync now supports auto-resolving sync conflicts and customizing
    rename behavior with new --conflict-resolve, --conflict-loser, and
    --conflict-suffix flags.

-   A new --resync-mode flag allows more control over which version of a
    file gets kept during a --resync.

-   Bisync now supports --retries and --retries-sleep (when --resilient
    is set.)

v1.64

-   Fixed an issue causing dry runs to inadvertently commit filter
    changes

-   Fixed an issue causing --resync to erroneously delete empty folders
    and duplicate files unique to Path2

-   --check-access is now enforced during --resync, preventing data loss
    in certain user error scenarios

-   Fixed an issue causing bisync to consider more files than necessary
    due to overbroad filters during delete operations

-   Improved detection of false positive change conflicts (identical
    files are now left alone instead of renamed)

-   Added support for --create-empty-src-dirs

-   Added experimental --resilient mode to allow recovery from
    self-correctable errors

-   Added new --ignore-listing-checksum flag to distinguish from
    --ignore-checksum

-   Performance improvements for large remotes

-   Documentation and testing improvements

Release signing

The hashes of the binary artefacts of the rclone release are signed with
a public PGP/GPG key. This can be verified manually as described below.

The same mechanism is also used by rclone selfupdate to verify that the
release has not been tampered with before the new update is installed.
This checks the SHA256 hash and the signature with a public key compiled
into the rclone binary.

Release signing key

You may obtain the release signing key from:

-   From KEYS on this website - this file contains all past signing keys
    also.
-   The git repository hosted on GitHub -
    https://github.com/rclone/rclone/blob/master/docs/content/KEYS
-   gpg --keyserver hkps://keys.openpgp.org --search nick@craig-wood.com
-   gpg --keyserver hkps://keyserver.ubuntu.com --search nick@craig-wood.com
-   https://www.craig-wood.com/nick/pub/pgp-key.txt

After importing the key, verify that the fingerprint of one of the keys
matches: FBF737ECE9F8AB18604BD2AC93935E02FF3B54FA ads this key is used
for signing.

We recommend that you cross-check the fingerprint shown above through
the domains listed below. By cross-checking the integrity of the
fingerprint across multiple domains you can be confident that you
obtained the correct key.

-   The source for this page on GitHub.
-   Through DNS dig key.rclone.org txt

If you find anything that doesn't not match, please contact the
developers at once.

How to verify the release

In the release directory you will see the release files and some files
called MD5SUMS, SHA1SUMS and SHA256SUMS.

    $ rclone lsf --http-url https://downloads.rclone.org/v1.63.1 :http:
    MD5SUMS
    SHA1SUMS
    SHA256SUMS
    rclone-v1.63.1-freebsd-386.zip
    rclone-v1.63.1-freebsd-amd64.zip
    ...
    rclone-v1.63.1-windows-arm64.zip
    rclone-v1.63.1.tar.gz
    version.txt

The MD5SUMS, SHA1SUMS and SHA256SUMS contain hashes of the binary files
in the release directory along with a signature.

For example:

    $ rclone cat --http-url https://downloads.rclone.org/v1.63.1 :http:SHA256SUMS
    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    f6d1b2d7477475ce681bdce8cb56f7870f174cb6b2a9ac5d7b3764296ea4a113  rclone-v1.63.1-freebsd-386.zip
    7266febec1f01a25d6575de51c44ddf749071a4950a6384e4164954dff7ac37e  rclone-v1.63.1-freebsd-amd64.zip
    ...
    66ca083757fb22198309b73879831ed2b42309892394bf193ff95c75dff69c73  rclone-v1.63.1-windows-amd64.zip
    bbb47c16882b6c5f2e8c1b04229378e28f68734c613321ef0ea2263760f74cd0  rclone-v1.63.1-windows-arm64.zip
    -----BEGIN PGP SIGNATURE-----

    iF0EARECAB0WIQT79zfs6firGGBL0qyTk14C/ztU+gUCZLVKJQAKCRCTk14C/ztU
    +pZuAJ0XJ+QWLP/3jCtkmgcgc4KAwd/rrwCcCRZQ7E+oye1FPY46HOVzCFU3L7g=
    =8qrL
    -----END PGP SIGNATURE-----

Download the files

The first step is to download the binary and SUMs file and verify that
the SUMs you have downloaded match. Here we download
rclone-v1.63.1-windows-amd64.zip - choose the binary (or binaries)
appropriate to your architecture. We've also chosen the SHA256SUMS as
these are the most secure. You could verify the other types of hash also
for extra security. rclone selfupdate verifies just the SHA256SUMS.

    mkdir /tmp/check
    cd /tmp/check
    rclone copy --http-url https://downloads.rclone.org/v1.63.1 :http:SHA256SUMS .
    rclone copy --http-url https://downloads.rclone.org/v1.63.1 :http:rclone-v1.63.1-windows-amd64.zip .

Verify the signatures

First verify the signatures on the SHA256 file.

Import the key. See above for ways to verify this key is correct.

    $ gpg --keyserver keyserver.ubuntu.com --receive-keys FBF737ECE9F8AB18604BD2AC93935E02FF3B54FA
    gpg: key 93935E02FF3B54FA: public key "Nick Craig-Wood <nick@craig-wood.com>" imported
    gpg: Total number processed: 1
    gpg:               imported: 1

Then check the signature:

    $ gpg --verify SHA256SUMS 
    gpg: Signature made Mon 17 Jul 2023 15:03:17 BST
    gpg:                using DSA key FBF737ECE9F8AB18604BD2AC93935E02FF3B54FA
    gpg: Good signature from "Nick Craig-Wood <nick@craig-wood.com>" [ultimate]

Verify the signature was good and is using the fingerprint shown above.

Repeat for MD5SUMS and SHA1SUMS if desired.

Verify the hashes

Now that we know the signatures on the hashes are OK we can verify the
binaries match the hashes, completing the verification.

    $ sha256sum -c SHA256SUMS 2>&1 | grep OK
    rclone-v1.63.1-windows-amd64.zip: OK

Or do the check with rclone

    $ rclone hashsum sha256 -C SHA256SUMS rclone-v1.63.1-windows-amd64.zip 
    2023/09/11 10:53:58 NOTICE: SHA256SUMS: improperly formatted checksum line 0
    2023/09/11 10:53:58 NOTICE: SHA256SUMS: improperly formatted checksum line 1
    2023/09/11 10:53:58 NOTICE: SHA256SUMS: improperly formatted checksum line 49
    2023/09/11 10:53:58 NOTICE: SHA256SUMS: 4 warning(s) suppressed...
    = rclone-v1.63.1-windows-amd64.zip
    2023/09/11 10:53:58 NOTICE: Local file system at /tmp/check: 0 differences found
    2023/09/11 10:53:58 NOTICE: Local file system at /tmp/check: 1 matching files

Verify signatures and hashes together

You can verify the signatures and hashes in one command line like this:

    $ h=$(gpg --decrypt SHA256SUMS) && echo "$h" | sha256sum - -c --ignore-missing
    gpg: Signature made Mon 17 Jul 2023 15:03:17 BST
    gpg:                using DSA key FBF737ECE9F8AB18604BD2AC93935E02FF3B54FA
    gpg: Good signature from "Nick Craig-Wood <nick@craig-wood.com>" [ultimate]
    gpg:                 aka "Nick Craig-Wood <nick@memset.com>" [unknown]
    rclone-v1.63.1-windows-amd64.zip: OK

1Fichier

This is a backend for the 1fichier cloud storage service. Note that a
Premium subscription is required to use the API.

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

The initial setup for 1Fichier involves getting the API key from the
website which you need to do in your browser.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / 1Fichier
       \ "fichier"
    [snip]
    Storage> fichier
    ** See help for fichier backend at: https://rclone.org/fichier/ **

    Your API Key, get it from https://1fichier.com/console/params.pl
    Enter a string value. Press Enter for the default ("").
    api_key> example_key

    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> 
    Remote config
    Configuration complete.
    Options:
    - type: fichier
    - api_key: example_key
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your 1Fichier account

    rclone lsd remote:

List all the files in your 1Fichier account

    rclone ls remote:

To copy a local directory to a 1Fichier directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

1Fichier does not support modification times. It supports the Whirlpool
hash algorithm.

Duplicated files

1Fichier can have two files with exactly the same name and path (unlike
a normal file system).

Duplicated files cause problems with the syncing and you will see
messages in the log about duplicates.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼
  <            0x3C        ＜
  >            0x3E        ＞
  "            0x22        ＂
  $            0x24        ＄
  `            0x60        ｀
  '            0x27        ＇

File names can also not start or end with the following characters.
These only get replaced if they are the first or last character in the
name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to fichier (1Fichier).

--fichier-api-key

Your API Key, get it from https://1fichier.com/console/params.pl.

Properties:

-   Config: api_key
-   Env Var: RCLONE_FICHIER_API_KEY
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to fichier (1Fichier).

--fichier-shared-folder

If you want to download a shared folder, add this parameter.

Properties:

-   Config: shared_folder
-   Env Var: RCLONE_FICHIER_SHARED_FOLDER
-   Type: string
-   Required: false

--fichier-file-password

If you want to download a shared file that is password protected, add
this parameter.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: file_password
-   Env Var: RCLONE_FICHIER_FILE_PASSWORD
-   Type: string
-   Required: false

--fichier-folder-password

If you want to list the files in a shared folder that is password
protected, add this parameter.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: folder_password
-   Env Var: RCLONE_FICHIER_FOLDER_PASSWORD
-   Type: string
-   Required: false

--fichier-cdn

Set if you wish to use CDN download links.

Properties:

-   Config: cdn
-   Env Var: RCLONE_FICHIER_CDN
-   Type: bool
-   Default: false

--fichier-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_FICHIER_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,SingleQuote,BackQuote,Dollar,BackSlash,Del,Ctl,LeftSpace,RightSpace,InvalidUtf8,Dot

--fichier-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_FICHIER_DESCRIPTION
-   Type: string
-   Required: false

Limitations

rclone about is not supported by the 1Fichier backend. Backends without
this capability cannot determine free space for an rclone mount or use
policy mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Alias

The alias remote provides a new name for another remote.

Paths may be as deep as required or a local path, e.g.
remote:directory/subdirectory or /directory/subdirectory.

During the initial setup with rclone config you will specify the target
remote. The target remote can either be a local path or another remote.

Subfolders can be used in target remote. Assume an alias remote named
backup with the target mydrive:private/backup. Invoking
rclone mkdir backup:desktop is exactly the same as invoking
rclone mkdir mydrive:private/backup/desktop.

There will be no special handling of paths containing .. segments.
Invoking rclone mkdir backup:../desktop is exactly the same as invoking
rclone mkdir mydrive:private/backup/../desktop. The empty path is not
allowed as a remote. To alias the current directory use . instead.

The target remote can also be a connection string. This can be used to
modify the config of a remote for different uses, e.g. the alias
myDriveTrash with the target remote myDrive,trashed_only: can be used to
only show the trashed files in myDrive.

Configuration

Here is an example of how to make an alias called remote for local
folder. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Alias for an existing remote
       \ "alias"
    [snip]
    Storage> alias
    Remote or path to alias.
    Can be "myremote:path/to/dir", "myremote:bucket", "myremote:" or "/local/path".
    remote> /mnt/storage/backup
    Remote config
    Configuration complete.
    Options:
    - type: alias
    - remote: /mnt/storage/backup
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:

    Name                 Type
    ====                 ====
    remote               alias

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level in /mnt/storage/backup

    rclone lsd remote:

List all the files in /mnt/storage/backup

    rclone ls remote:

Copy another local directory to the alias directory called source

    rclone copy /home/source remote:source

Standard options

Here are the Standard options specific to alias (Alias for an existing
remote).

--alias-remote

Remote or path to alias.

Can be "myremote:path/to/dir", "myremote:bucket", "myremote:" or
"/local/path".

Properties:

-   Config: remote
-   Env Var: RCLONE_ALIAS_REMOTE
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to alias (Alias for an existing
remote).

--alias-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_ALIAS_DESCRIPTION
-   Type: string
-   Required: false

Amazon S3 Storage Providers

The S3 backend can be used with a number of different providers:

-   AWS S3
-   Alibaba Cloud (Aliyun) Object Storage System (OSS)
-   Ceph
-   China Mobile Ecloud Elastic Object Storage (EOS)
-   Cloudflare R2
-   Arvan Cloud Object Storage (AOS)
-   Bizfly Cloud Simple Storage
-   Cubbit DS3
-   DigitalOcean Spaces
-   Dreamhost
-   Exaba
-   Fastly Object Storage
-   FileLu S5 (S3-Compatible Object Storage)
-   GCS
-   Hetzner
-   Hitachi Content Platform (HCP)
-   Huawei OBS
-   IBM COS S3
-   IDrive e2
-   Impossible Cloud
-   Intercolo Object Storage
-   IONOS Cloud
-   Leviia Object Storage
-   Liara Object Storage
-   Linode Object Storage
-   Magalu Object Storage
-   MEGA S4 Object Storage
-   Minio
-   Outscale
-   OVHcloud
-   Petabox
-   Pure Storage FlashBlade
-   Qiniu Cloud Object Storage (Kodo)
-   Rabata Cloud Storage
-   RackCorp Object Storage
-   Rclone Serve S3
-   Scaleway
-   Seagate Lyve Cloud
-   SeaweedFS
-   Selectel
-   Servercore Object Storage
-   Spectra Logic
-   Storj
-   Synology C2 Object Storage
-   Tencent Cloud Object Storage (COS)
-   US3
-   Wasabi
-   Zadara Object Storage
-   Zata

Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, e.g. remote:bucket/path/to/dir.

Once you have made a remote (see the provider specific section above)
you can use it like this:

See all buckets

    rclone lsd remote:

Make a new bucket

    rclone mkdir remote:bucket

List the contents of a bucket

    rclone ls remote:bucket

Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.

    rclone sync --interactive /home/local/directory remote:bucket

Configuration

Here is an example of making an s3 configuration for the AWS S3
provider. Most applies to the other providers as well, any differences
are described below.

First run

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ "s3"
    [snip]
    Storage> s3
    Choose your S3 provider.
    Choose a number from below, or type in your own value
     1 / Amazon Web Services (AWS) S3
       \ "AWS"
     2 / Ceph Object Storage
       \ "Ceph"
     3 / DigitalOcean Spaces
       \ "DigitalOcean"
     4 / Dreamhost DreamObjects
       \ "Dreamhost"
     5 / IBM COS S3
       \ "IBMCOS"
     6 / Minio Object Storage
       \ "Minio"
     7 / Wasabi Object Storage
       \ "Wasabi"
     8 / Any other S3 compatible provider
       \ "Other"
    provider> 1
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own value
     1 / Enter AWS credentials in the next step
       \ "false"
     2 / Get AWS credentials from the environment (env vars or IAM)
       \ "true"
    env_auth> 1
    AWS Access Key ID - leave blank for anonymous access or runtime credentials.
    access_key_id> XXX
    AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
    secret_access_key> YYY
    Region to connect to.
    Choose a number from below, or type in your own value
       / The default endpoint - a good choice if you are unsure.
     1 | US Region, Northern Virginia, or Pacific Northwest.
       | Leave location constraint empty.
       \ "us-east-1"
       / US East (Ohio) Region
     2 | Needs location constraint us-east-2.
       \ "us-east-2"
       / US West (Oregon) Region
     3 | Needs location constraint us-west-2.
       \ "us-west-2"
       / US West (Northern California) Region
     4 | Needs location constraint us-west-1.
       \ "us-west-1"
       / Canada (Central) Region
     5 | Needs location constraint ca-central-1.
       \ "ca-central-1"
       / EU (Ireland) Region
     6 | Needs location constraint EU or eu-west-1.
       \ "eu-west-1"
       / EU (London) Region
     7 | Needs location constraint eu-west-2.
       \ "eu-west-2"
       / EU (Frankfurt) Region
     8 | Needs location constraint eu-central-1.
       \ "eu-central-1"
       / Asia Pacific (Singapore) Region
     9 | Needs location constraint ap-southeast-1.
       \ "ap-southeast-1"
       / Asia Pacific (Sydney) Region
    10 | Needs location constraint ap-southeast-2.
       \ "ap-southeast-2"
       / Asia Pacific (Tokyo) Region
    11 | Needs location constraint ap-northeast-1.
       \ "ap-northeast-1"
       / Asia Pacific (Seoul)
    12 | Needs location constraint ap-northeast-2.
       \ "ap-northeast-2"
       / Asia Pacific (Mumbai)
    13 | Needs location constraint ap-south-1.
       \ "ap-south-1"
       / Asia Pacific (Hong Kong) Region
    14 | Needs location constraint ap-east-1.
       \ "ap-east-1"
       / South America (Sao Paulo) Region
    15 | Needs location constraint sa-east-1.
       \ "sa-east-1"
    region> 1
    Endpoint for S3 API.
    Leave blank if using AWS to use the default endpoint for the region.
    endpoint>
    Location constraint - must be set to match the Region. Used when creating buckets only.
    Choose a number from below, or type in your own value
     1 / Empty for US Region, Northern Virginia, or Pacific Northwest.
       \ ""
     2 / US East (Ohio) Region.
       \ "us-east-2"
     3 / US West (Oregon) Region.
       \ "us-west-2"
     4 / US West (Northern California) Region.
       \ "us-west-1"
     5 / Canada (Central) Region.
       \ "ca-central-1"
     6 / EU (Ireland) Region.
       \ "eu-west-1"
     7 / EU (London) Region.
       \ "eu-west-2"
     8 / EU Region.
       \ "EU"
     9 / Asia Pacific (Singapore) Region.
       \ "ap-southeast-1"
    10 / Asia Pacific (Sydney) Region.
       \ "ap-southeast-2"
    11 / Asia Pacific (Tokyo) Region.
       \ "ap-northeast-1"
    12 / Asia Pacific (Seoul)
       \ "ap-northeast-2"
    13 / Asia Pacific (Mumbai)
       \ "ap-south-1"
    14 / Asia Pacific (Hong Kong)
       \ "ap-east-1"
    15 / South America (Sao Paulo) Region.
       \ "sa-east-1"
    location_constraint> 1
    Canned ACL used when creating buckets and/or storing objects in S3.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Choose a number from below, or type in your own value
     1 / Owner gets FULL_CONTROL. No one else has access rights (default).
       \ "private"
     2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access.
       \ "public-read"
       / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
     3 | Granting this on a bucket is generally not recommended.
       \ "public-read-write"
     4 / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access.
       \ "authenticated-read"
       / Object owner gets FULL_CONTROL. Bucket owner gets READ access.
     5 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ "bucket-owner-read"
       / Both the object owner and the bucket owner get FULL_CONTROL over the object.
     6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ "bucket-owner-full-control"
    acl> 1
    The server-side encryption algorithm used when storing this object in S3.
    Choose a number from below, or type in your own value
     1 / None
       \ ""
     2 / AES256
       \ "AES256"
    server_side_encryption> 1
    The storage class to use when storing objects in S3.
    Choose a number from below, or type in your own value
     1 / Default
       \ ""
     2 / Standard storage class
       \ "STANDARD"
     3 / Reduced redundancy storage class
       \ "REDUCED_REDUNDANCY"
     4 / Standard Infrequent Access storage class
       \ "STANDARD_IA"
     5 / One Zone Infrequent Access storage class
       \ "ONEZONE_IA"
     6 / Glacier Flexible Retrieval storage class
       \ "GLACIER"
     7 / Glacier Deep Archive storage class
       \ "DEEP_ARCHIVE"
     8 / Intelligent-Tiering storage class
       \ "INTELLIGENT_TIERING"
     9 / Glacier Instant Retrieval storage class
       \ "GLACIER_IR"
    storage_class> 1
    Remote config
    Configuration complete.
    Options:
    - type: s3
    - provider: AWS
    - env_auth: false
    - access_key_id: XXX
    - secret_access_key: YYY
    - region: us-east-1
    - endpoint:
    - location_constraint:
    - acl: private
    - server_side_encryption:
    - storage_class:
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d>

Modification times and hashes

Modification times

The modified time is stored as metadata on the object as
X-Amz-Meta-Mtime as floating point since the epoch, accurate to 1 ns.

If the modification time needs to be updated rclone will attempt to
perform a server side copy to update the modification if the object can
be copied in a single part. In the case the object is larger than 5Gb or
is in Glacier or Glacier Deep Archive storage the object will be
uploaded rather than copied.

Note that reading this from the object takes an additional HEAD request
as the metadata isn't returned in object listings.

Hashes

For small objects which weren't uploaded as multipart uploads (objects
sized below --s3-upload-cutoff if uploaded with rclone) rclone uses the
ETag: header as an MD5 checksum.

However for objects which were uploaded as multipart uploads or with
server side encryption (SSE-AWS or SSE-C) the ETag header is no longer
the MD5 sum of the data, so rclone adds an additional piece of metadata
X-Amz-Meta-Md5chksum which is a base64 encoded MD5 hash (in the same
format as is required for Content-MD5). You can use base64 -d and
hexdump to check this value manually:

    echo 'VWTGdNx3LyXQDfA0e2Edxw==' | base64 -d | hexdump

or you can use rclone check to verify the hashes are OK.

For large objects, calculating this hash can take some time so the
addition of this hash can be disabled with --s3-disable-checksum. This
will mean that these objects do not have an MD5 checksum.

Note that reading this from the object takes an additional HEAD request
as the metadata isn't returned in object listings.

Reducing costs

Avoiding HEAD requests to read the modification time

By default, rclone will use the modification time of objects stored in
S3 for syncing. This is stored in object metadata which unfortunately
takes an extra HEAD request to read which can be expensive (in time and
money).

The modification time is used by default for all operations that require
checking the time a file was last updated. It allows rclone to treat the
remote more like a true filesystem, but it is inefficient on S3 because
it requires an extra API call to retrieve the metadata.

The extra API calls can be avoided when syncing (using rclone sync or
rclone copy) in a few different ways, each with its own tradeoffs.

-   --size-only
    -   Only checks the size of files.
    -   Uses no extra transactions.
    -   If the file doesn't change size then rclone won't detect it has
        changed.
    -   rclone sync --size-only /path/to/source s3:bucket
-   --checksum
    -   Checks the size and MD5 checksum of files.
    -   Uses no extra transactions.
    -   The most accurate detection of changes possible.
    -   Will cause the source to read an MD5 checksum which, if it is a
        local disk, will cause lots of disk activity.
    -   If the source and destination are both S3 this is the
        recommended flag to use for maximum efficiency.
    -   rclone sync --checksum /path/to/source s3:bucket
-   --update --use-server-modtime
    -   Uses no extra transactions.
    -   Modification time becomes the time the object was uploaded.
    -   For many operations this is sufficient to determine if it needs
        uploading.
    -   Using --update along with --use-server-modtime, avoids the extra
        API call and uploads files whose local modification time is
        newer than the time it was last uploaded.
    -   Files created with timestamps in the past will be missed by the
        sync.
    -   rclone sync --update --use-server-modtime /path/to/source s3:bucket

These flags can and should be used in combination with --fast-list - see
below.

If using rclone mount or any command using the VFS (eg rclone serve)
commands then you might want to consider using the VFS flag --no-modtime
which will stop rclone reading the modification time for every object.
You could also use --use-server-modtime if you are happy with the
modification times of the objects being the time of upload.

Avoiding GET requests to read directory listings

Rclone's default directory traversal is to process each directory
individually. This takes one API call per directory. Using the
--fast-list flag will read all info about the objects into memory first
using a smaller number of API calls (one per 1000 objects). See the
rclone docs for more details.

    rclone sync --fast-list --checksum /path/to/source s3:bucket

--fast-list trades off API transactions for memory use. As a rough guide
rclone uses 1k of memory per object stored, so using --fast-list on a
sync of a million objects will use roughly 1 GiB of RAM.

If you are only copying a small number of files into a big repository
then using --no-traverse is a good idea. This finds objects directly
instead of through directory listings. You can do a "top-up" sync very
cheaply by using --max-age and --no-traverse to copy only recent files,
eg

    rclone copy --max-age 24h --no-traverse /path/to/source s3:bucket

You'd then do a full rclone sync less often.

Note that --fast-list isn't required in the top-up sync.

Avoiding HEAD requests after PUT

By default, rclone will HEAD every object it uploads. It does this to
check the object got uploaded correctly.

You can disable this with the --s3-no-head option - see there for more
details.

Setting this flag increases the chance for undetected upload failures.

Increasing performance

Using server-side copy

If you are copying objects between S3 buckets in the same region, you
should use server-side copy. This is much faster than downloading and
re-uploading the objects, as no data is transferred.

For rclone to use server-side copy, you must use the same remote for the
source and destination.

    rclone copy s3:source-bucket s3:destination-bucket

When using server-side copy, the performance is limited by the rate at
which rclone issues API requests to S3. See below for how to increase
the number of API requests rclone makes.

Increasing the rate of API requests

You can increase the rate of API requests to S3 by increasing the
parallelism using --transfers and --checkers options.

Rclone uses a very conservative defaults for these settings, as not all
providers support high rates of requests. Depending on your provider,
you can increase significantly the number of transfers and checkers.

For example, with AWS S3, if you can increase the number of checkers to
values like 200. If you are doing a server-side copy, you can also
increase the number of transfers to 200.

    rclone sync --transfers 200 --checkers 200 --checksum s3:source-bucket s3:destination-bucket

You will need to experiment with these values to find the optimal
settings for your setup.

Data integrity

Rclone does its best to verify every part of an upload or download to
the s3 provider using various hashes.

Every HTTP transaction to/from the provider has a X-Amz-Content-Sha256
or a Content-Md5 header to guard against corruption of the HTTP body.
The HTTP Header is protected by the signature passed in the
Authorization header.

All communications with the provider is done over https for encryption
and additional error protection.

Single part uploads

-   Rclone uploads single part uploads with a Content-Md5 using the MD5
    hash read from the source. The provider checks this is correct on
    receipt of the data.

-   Rclone then does a HEAD request (disable with --s3-no-head) to read
    the ETag back which is the MD5 of the file and checks that with what
    it sent.

Note that if the source does not have an MD5 then the single part
uploads will not have hash protection. In this case it is recommended to
use --s3-upload-cutoff 0 so all files are uploaded as multipart uploads.

Multipart uploads

For files above --s3-upload-cutoff rclone splits the file into multiple
parts for upload.

-   Each part is protected with both an X-Amz-Content-Sha256 and a
    Content-Md5

When rclone has finished the upload of all the parts it then completes
the upload by sending:

-   The MD5 hash of each part
-   The number of parts
-   This info is all protected with a X-Amz-Content-Sha256

The provider checks the MD5 for all the parts it has received against
what rclone sends and if it is good it returns OK.

Rclone then does a HEAD request (disable with --s3-no-head) and checks
the ETag is what it expects (in this case it should be the MD5 sum of
all the MD5 sums of all the parts with the number of parts on the end).

If the source has an MD5 sum then rclone will attach the
X-Amz-Meta-Md5chksum with it as the ETag for a multipart upload can't
easily be checked against the file as the chunk size must be known in
order to calculate it.

Downloads

Rclone checks the MD5 hash of the data downloaded against either the
ETag or the X-Amz-Meta-Md5chksum metadata (if present) which rclone
uploads with multipart uploads.

Further checking

At each stage rclone and the provider are sending and checking hashes of
everything. Rclone deliberately HEADs each object after upload to check
it arrived safely for extra security. (You can disable this with
--s3-no-head).

If you require further assurance that your data is intact you can use
rclone check to check the hashes locally vs the remote.

And if you are feeling ultimately paranoid use rclone check --download
which will download the files and check them against the local copies.
(Note that this doesn't use disk to do this - it streams them in
memory).

Versions

When bucket versioning is enabled (this can be done with rclone with the
rclone backend versioning command) when rclone uploads a new version of
a file it creates a new version of it Likewise when you delete a file,
the old version will be marked hidden and still be available.

Old versions of files, where available, are visible using the
--s3-versions flag.

It is also possible to view a bucket as it was at a certain point in
time, using the --s3-version-at flag. This will show the file versions
as they were at that time, showing files that have been deleted
afterwards, and hiding files that were created since.

If you wish to remove all the old versions then you can use the
rclone backend cleanup-hidden remote:bucket command which will delete
all the old hidden versions of files, leaving the current ones intact.
You can also supply a path and only old versions under that path will be
deleted, e.g. rclone backend cleanup-hidden remote:bucket/path/to/stuff.

When you purge a bucket, the current and the old versions will be
deleted then the bucket will be deleted.

However delete will cause the current versions of the files to become
hidden old versions.

Here is a session showing the listing and retrieval of an old version
followed by a cleanup of the old versions.

Show current version and all the versions with --s3-versions flag.

    $ rclone -q ls s3:cleanup-test
            9 one.txt

    $ rclone -q --s3-versions ls s3:cleanup-test
            9 one.txt
            8 one-v2016-07-04-141032-000.txt
           16 one-v2016-07-04-141003-000.txt
           15 one-v2016-07-02-155621-000.txt

Retrieve an old version

    $ rclone -q --s3-versions copy s3:cleanup-test/one-v2016-07-04-141003-000.txt /tmp

    $ ls -l /tmp/one-v2016-07-04-141003-000.txt
    -rw-rw-r-- 1 ncw ncw 16 Jul  2 17:46 /tmp/one-v2016-07-04-141003-000.txt

Clean up all the old versions and show that they've gone.

    $ rclone -q backend cleanup-hidden s3:cleanup-test

    $ rclone -q ls s3:cleanup-test
            9 one.txt

    $ rclone -q --s3-versions ls s3:cleanup-test
            9 one.txt

Versions naming caveat

When using --s3-versions flag rclone is relying on the file name to work
out whether the objects are versions or not. Versions' names are created
by inserting timestamp between file name and its extension.

            9 file.txt
            8 file-v2023-07-17-161032-000.txt
           16 file-v2023-06-15-141003-000.txt

If there are real files present with the same names as versions, then
behaviour of --s3-versions can be unpredictable.

Cleanup

If you run rclone cleanup s3:bucket then it will remove all pending
multipart uploads older than 24 hours. You can use the --interactive/i
or --dry-run flag to see exactly what it will do. If you want more
control over the expiry date then run
rclone backend cleanup s3:bucket -o max-age=1h to expire all uploads
older than one hour. You can use
rclone backend list-multipart-uploads s3:bucket to see the pending
multipart uploads.

Restricted filename characters

S3 allows any valid UTF-8 string as a key.

Invalid UTF-8 bytes will be replaced, as they can't be used in XML.

The following characters are replaced since these are problematic when
dealing with the REST API:

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  /            0x2F        ／

The encoding will also encode these file names as they don't seem to
work with the SDK properly:

  File name    Replacement
  ----------- -------------
  .                ．
  ..              ．．

Important note about double slashes (//)

Object keys containing consecutive forward slashes (//) are not
supported by rclone.

When rclone encounters an object key with // (e.g., a//b), it will
normalize the path to use a single slash (e.g., a/b). This normalization
can cause "object not found" errors when trying to access the original
object, as rclone will look for the normalized path instead of the
actual object key.

Example: - Original S3 object key: folder//file.txt - rclone interprets
it as: folder/file.txt - Result: "object not found" error when trying to
access folder//file.txt

Workaround: Avoid using consecutive forward slashes (//) in S3 object
keys when using rclone. If you have existing objects with // in their
keys, you will need to rename them to use single slashes or access them
through other means.

Multipart uploads

rclone supports multipart uploads with S3 which means that it can upload
files bigger than 5 GiB.

Note that files uploaded both with multipart upload and through crypt
remotes do not have MD5 sums.

rclone switches from single part uploads to multipart uploads at the
point specified by --s3-upload-cutoff. This can be a maximum of 5 GiB
and a minimum of 0 (ie always upload multipart files).

The chunk sizes used in the multipart upload are specified by
--s3-chunk-size and the number of chunks uploaded concurrently is
specified by --s3-upload-concurrency.

Multipart uploads will use extra memory equal to: --transfers ×
--s3-upload-concurrency × --s3-chunk-size. Single part uploads do not
use extra memory.

Single part transfers can be faster than multipart transfers or slower
depending on your latency from S3 - the more latency, the more likely
single part transfers will be faster.

Increasing --s3-upload-concurrency will increase throughput (8 would be
a sensible value) and increasing --s3-chunk-size also increases
throughput (16M would be sensible). Increasing either of these will use
more memory. The default values are high enough to gain most of the
possible performance without using too much memory.

Buckets and Regions

With Amazon S3 you can list buckets (rclone lsd) using any region, but
you can only access the content of a bucket from the region it was
created in. If you attempt to access a bucket from the wrong region, you
will get an error, incorrect region, the bucket is not in 'XXX' region.

Authentication

There are a number of ways to supply rclone with a set of AWS
credentials, with and without using the environment.

The different authentication methods are tried in this order:

-   Directly in the rclone configuration file (env_auth = false in the
    config file):
    -   access_key_id and secret_access_key are required.
    -   session_token can be optionally set when using AWS STS.
-   Runtime configuration (env_auth = true in the config file):
    -   Export the following environment variables before running
        rclone:
        -   Access Key ID: AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY
        -   Secret Access Key: AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY
        -   Session Token: AWS_SESSION_TOKEN (optional)
    -   Or, use a named profile:
        -   Profile files are standard files used by AWS CLI tools
        -   By default it will use the profile in your home directory
            (e.g. ~/.aws/credentials on unix based systems) file and the
            "default" profile, to change set these environment variables
            or config keys:
            -   AWS_SHARED_CREDENTIALS_FILE to control which file or the
                shared_credentials_file config key.
            -   AWS_PROFILE to control which profile to use or the
                profile config key.
    -   Or, run rclone in an ECS task with an IAM role (AWS only).
    -   Or, run rclone on an EC2 instance with an IAM role (AWS only).
    -   Or, run rclone in an EKS pod with an IAM role that is associated
        with a service account (AWS only).
    -   Or, use process credentials to read config from an external
        program.

With env_auth = true rclone (which uses the SDK for Go v2) should
support all authentication methods that the aws CLI tool does and the
other AWS SDKs.

If none of these option actually end up providing rclone with AWS
credentials then S3 interaction will be non-authenticated (see the
anonymous access section for more info).

Assume Role (Cross-Account Access)

If you need to access S3 resources in a different AWS account, you can
use IAM role assumption. This is useful for cross-account access
scenarios where you have credentials in one account but need to access
resources in another account.

To use assume role, configure the following parameters:

-   role_arn - The ARN (Amazon Resource Name) of the IAM role to assume
    in the target account. Format:
    arn:aws:iam::ACCOUNT-ID:role/ROLE-NAME
-   role_session_name (optional) - A name for the assumed role session.
    If not specified, rclone will generate one automatically.
-   role_session_duration (optional) - Duration for which the assumed
    role credentials are valid. If not specified, AWS default duration
    will be used (typically 1 hour).
-   role_external_id (optional) - An external ID required by the role's
    trust policy for additional security. This is typically used when
    the role is accessed by a third party.

The assume role feature works with both direct credentials
(env_auth = false) and environment-based authentication
(env_auth = true). Rclone will first authenticate using the base
credentials, then use those credentials to assume the specified role.

Example configuration for cross-account access:

    [s3-cross-account]
    type = s3
    provider = AWS
    env_auth = true
    region = us-east-1
    role_arn = arn:aws:iam::123456789012:role/CrossAccountS3Role
    role_session_name = rclone-session
    role_external_id = unique-role-external-id-12345

In this example: - Base credentials are obtained from the environment
(IAM role, credentials file, or environment variables) - These
credentials are then used to assume the role CrossAccountS3Role in
account 123456789012 - An external ID is provided for additional
security as required by the role's trust policy

The target role's trust policy in the destination account must allow the
source account or user to assume it. Example trust policy:

    {
      "Version": "2012-10-17",
      "Statement": [
        {
          "Effect": "Allow",
          "Principal": {
            "AWS": "arn:aws:iam::SOURCE-ACCOUNT-ID:root"
          },
          "Action": "sts:AssumeRole",
          "Condition": {
            "StringEquals": {
              "sts:ExternalID": "unique-role-external-id-12345"
            }
          }
        }
      ]
    }

S3 Permissions

When using the sync subcommand of rclone the following minimum
permissions are required to be available on the bucket being written to:

-   ListBucket
-   DeleteObject
-   GetObject
-   PutObject
-   PutObjectACL
-   CreateBucket (unless using s3-no-check-bucket)

When using the lsd subcommand, the ListAllMyBuckets permission is
required.

Example policy:

    {
      "Version": "2012-10-17",
      "Statement": [
        {
          "Effect": "Allow",
          "Principal": {
            "AWS": "arn:aws:iam::USER_SID:user/USER_NAME"
          },
          "Action": [
            "s3:ListBucket",
            "s3:DeleteObject",
            "s3:GetObject",
            "s3:PutObject",
            "s3:PutObjectAcl"
          ],
          "Resource": [
            "arn:aws:s3:::BUCKET_NAME/*",
            "arn:aws:s3:::BUCKET_NAME"
          ]
        },
        {
          "Effect": "Allow",
          "Action": "s3:ListAllMyBuckets",
          "Resource": "arn:aws:s3:::*"
        }
      ]
    }

Notes on above:

1.  This is a policy that can be used when creating bucket. It assumes
    that USER_NAME has been created.
2.  The Resource entry must include both resource ARNs, as one implies
    the bucket and the other implies the bucket's objects.
3.  When using s3-no-check-bucket and the bucket already exists, the
    "arn:aws:s3:::BUCKET_NAME" doesn't have to be included.

For reference, here's an Ansible script that will generate one or more
buckets that will work with rclone sync.

Key Management System (KMS)

If you are using server-side encryption with KMS then you must make sure
rclone is configured with server_side_encryption = aws:kms otherwise you
will find you can't transfer small objects - these will create checksum
errors.

Glacier and Glacier Deep Archive

You can upload objects using the glacier storage class or transition
them to glacier using a lifecycle policy. The bucket can still be synced
or copied into normally, but if rclone tries to access data from the
glacier storage class you will see an error like below.

    2017/09/11 19:07:43 Failed to sync: failed to open source object: Object in GLACIER, restore first: path/to/file

In this case you need to restore the object(s) in question before
accessing object contents. The restore section below shows how to do
this with rclone.

Note that rclone only speaks the S3 API it does not speak the Glacier
Vault API, so rclone cannot directly access Glacier Vaults.

Object-lock enabled S3 bucket

According to AWS's documentation on S3 Object Lock:

  If you configure a default retention period on a bucket, requests to
  upload objects in such a bucket must include the Content-MD5 header.

Rclone automatically computes and includes the Content-MD5 header when
uploading objects with Object Lock parameters set. No special
configuration is needed.

Setting Object Lock retention

Rclone supports setting Object Lock retention on uploaded objects with
the following options:

-   --s3-object-lock-mode - Set the Object Lock mode (GOVERNANCE or
    COMPLIANCE)
-   --s3-object-lock-retain-until-date - Set the retention date (RFC3339
    format or duration like 365d, 24h)
-   --s3-object-lock-legal-hold-status - Set legal hold (ON or OFF)

Example - upload files with 1 year GOVERNANCE retention:

    rclone copy local:/data remote:bucket \
        --s3-object-lock-mode GOVERNANCE \
        --s3-object-lock-retain-until-date 365d

Copying Object Lock settings from source

When using --metadata, you can use the special value copy to preserve
the source object's Object Lock settings:

    rclone copy source:bucket dest:bucket \
        --metadata \
        --s3-object-lock-mode copy \
        --s3-object-lock-retain-until-date copy

You can also mix copied and explicit values. For example, to change the
mode from COMPLIANCE to GOVERNANCE while preserving the original
retention date:

    rclone copy source:bucket dest:bucket \
        --metadata \
        --s3-object-lock-mode GOVERNANCE \
        --s3-object-lock-retain-until-date copy

Additional Object Lock options

-   --s3-bypass-governance-retention - Required to delete or overwrite
    objects with GOVERNANCE mode retention before the retention date
    expires
-   --s3-bucket-object-lock-enabled - Enable Object Lock when creating a
    new bucket with rclone mkdir
-   --s3-object-lock-set-after-upload - Set Object Lock via separate API
    calls after upload (for providers that don't support Object Lock
    headers during PUT)

Standard options

Here are the Standard options specific to s3 (Amazon S3 Compliant
Storage Providers including AWS, Alibaba, ArvanCloud, BizflyCloud, Ceph,
ChinaMobile, Cloudflare, Cubbit, DigitalOcean, Dreamhost, Exaba, Fastly,
FileLu, FlashBlade, GCS, HCP, Hetzner, HuaweiOBS, IBMCOS, IDrive,
ImpossibleCloud, Intercolo, IONOS, Leviia, Liara, Linode, LyveCloud,
Magalu, Mega, Minio, Netease, Outscale, OVHcloud, Petabox, Qiniu,
Rabata, RackCorp, Rclone, Scaleway, SeaweedFS, Selectel, Servercore,
SpectraLogic, Storj, Synology, TencentCOS, US3, Wasabi, Zadara, Zata,
Other).

--s3-provider

Choose your S3 provider.

Properties:

-   Config: provider
-   Env Var: RCLONE_S3_PROVIDER
-   Type: string
-   Required: false
-   Examples:
    -   "AWS"
        -   Amazon Web Services (AWS) S3
    -   "Alibaba"
        -   Alibaba Cloud Object Storage System (OSS) formerly Aliyun
    -   "ArvanCloud"
        -   Arvan Cloud Object Storage (AOS)
    -   "BizflyCloud"
        -   Bizfly Cloud Simple Storage
    -   "Ceph"
        -   Ceph Object Storage
    -   "ChinaMobile"
        -   China Mobile Ecloud Elastic Object Storage (EOS)
    -   "Cloudflare"
        -   Cloudflare R2 Storage
    -   "Cubbit"
        -   Cubbit DS3 Object Storage
    -   "DigitalOcean"
        -   DigitalOcean Spaces
    -   "Dreamhost"
        -   Dreamhost DreamObjects
    -   "Exaba"
        -   Exaba Object Storage
    -   "Fastly"
        -   Fastly Object Storage
    -   "FileLu"
        -   FileLu S5 (S3-Compatible Object Storage)
    -   "FlashBlade"
        -   Pure Storage FlashBlade Object Storage
    -   "GCS"
        -   Google Cloud Storage
    -   "HCP"
        -   Hitachi Content Platform (HCP)
    -   "Hetzner"
        -   Hetzner Object Storage
    -   "HuaweiOBS"
        -   Huawei Object Storage Service
    -   "IBMCOS"
        -   IBM COS S3
    -   "IDrive"
        -   IDrive e2
    -   "ImpossibleCloud"
        -   Impossible Cloud Object Storage
    -   "Intercolo"
        -   Intercolo Object Storage
    -   "IONOS"
        -   IONOS Cloud
    -   "Leviia"
        -   Leviia Object Storage
    -   "Liara"
        -   Liara Object Storage
    -   "Linode"
        -   Linode Object Storage
    -   "LyveCloud"
        -   Seagate Lyve Cloud
    -   "Magalu"
        -   Magalu Object Storage
    -   "Mega"
        -   MEGA S4 Object Storage
    -   "Minio"
        -   Minio Object Storage
    -   "Netease"
        -   Netease Object Storage (NOS)
    -   "Outscale"
        -   OUTSCALE Object Storage (OOS)
    -   "OVHcloud"
        -   OVHcloud Object Storage
    -   "Petabox"
        -   Petabox Object Storage
    -   "Qiniu"
        -   Qiniu Object Storage (Kodo)
    -   "Rabata"
        -   Rabata Cloud Storage
    -   "RackCorp"
        -   RackCorp Object Storage
    -   "Rclone"
        -   Rclone S3 Server
    -   "Scaleway"
        -   Scaleway Object Storage
    -   "SeaweedFS"
        -   SeaweedFS S3
    -   "Selectel"
        -   Selectel Object Storage
    -   "Servercore"
        -   Servercore Object Storage
    -   "SpectraLogic"
        -   Spectra Logic Black Pearl
    -   "Storj"
        -   Storj (S3 Compatible Gateway)
    -   "Synology"
        -   Synology C2 Object Storage
    -   "TencentCOS"
        -   Tencent Cloud Object Storage (COS)
    -   "US3"
        -   US3 Object Storage
    -   "Wasabi"
        -   Wasabi Object Storage
    -   "Zadara"
        -   Zadara Object Storage
    -   "Zata"
        -   Zata (S3 compatible Gateway)
    -   "Other"
        -   Any other S3 compatible provider

--s3-env-auth

Get AWS credentials from runtime (environment variables or EC2/ECS meta
data if no env vars).

Only applies if access_key_id and secret_access_key is blank.

Properties:

-   Config: env_auth
-   Env Var: RCLONE_S3_ENV_AUTH
-   Type: bool
-   Default: false
-   Examples:
    -   "false"
        -   Enter AWS credentials in the next step.
    -   "true"
        -   Get AWS credentials from the environment (env vars or IAM).

--s3-access-key-id

AWS Access Key ID.

Leave blank for anonymous access or runtime credentials.

Properties:

-   Config: access_key_id
-   Env Var: RCLONE_S3_ACCESS_KEY_ID
-   Type: string
-   Required: false

--s3-secret-access-key

AWS Secret Access Key (password).

Leave blank for anonymous access or runtime credentials.

Properties:

-   Config: secret_access_key
-   Env Var: RCLONE_S3_SECRET_ACCESS_KEY
-   Type: string
-   Required: false

--s3-region

Region to connect to.

Leave blank if you are using an S3 clone and you don't have a region.

Properties:

-   Config: region
-   Env Var: RCLONE_S3_REGION
-   Provider:
    AWS,BizflyCloud,Ceph,Cloudflare,Cubbit,DigitalOcean,Dreamhost,Exaba,Fastly,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IBMCOS,ImpossibleCloud,Intercolo,IONOS,Leviia,LyveCloud,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,Rabata,RackCorp,Scaleway,SeaweedFS,Selectel,Servercore,Synology,Wasabi,Zadara,Zata,Other
-   Type: string
-   Required: false
-   Examples:
    -   "us-east-1"
        -   The default endpoint - a good choice if you are unsure.
        -   US Region, Northern Virginia, or Pacific Northwest.
        -   Leave location constraint empty.
        -   Provider: AWS
    -   "us-east-2"
        -   US East (Ohio) Region.
        -   Needs location constraint us-east-2.
        -   Provider: AWS
    -   "us-west-1"
        -   US West (Northern California) Region.
        -   Needs location constraint us-west-1.
        -   Provider: AWS
    -   "us-west-2"
        -   US West (Oregon) Region.
        -   Needs location constraint us-west-2.
        -   Provider: AWS
    -   "ca-central-1"
        -   Canada (Central) Region.
        -   Needs location constraint ca-central-1.
        -   Provider: AWS
    -   "eu-west-1"
        -   EU (Ireland) Region.
        -   Needs location constraint EU or eu-west-1.
        -   Provider: AWS
    -   "eu-west-2"
        -   EU (London) Region.
        -   Needs location constraint eu-west-2.
        -   Provider: AWS
    -   "eu-west-3"
        -   EU (Paris) Region.
        -   Needs location constraint eu-west-3.
        -   Provider: AWS
    -   "eu-north-1"
        -   EU (Stockholm) Region.
        -   Needs location constraint eu-north-1.
        -   Provider: AWS
    -   "eu-south-1"
        -   EU (Milan) Region.
        -   Needs location constraint eu-south-1.
        -   Provider: AWS
    -   "eu-central-1"
        -   EU (Frankfurt) Region.
        -   Needs location constraint eu-central-1.
        -   Provider: AWS
    -   "ap-southeast-1"
        -   Asia Pacific (Singapore) Region.
        -   Needs location constraint ap-southeast-1.
        -   Provider: AWS
    -   "ap-southeast-2"
        -   Asia Pacific (Sydney) Region.
        -   Needs location constraint ap-southeast-2.
        -   Provider: AWS
    -   "ap-northeast-1"
        -   Asia Pacific (Tokyo) Region.
        -   Needs location constraint ap-northeast-1.
        -   Provider: AWS
    -   "ap-northeast-2"
        -   Asia Pacific (Seoul).
        -   Needs location constraint ap-northeast-2.
        -   Provider: AWS
    -   "ap-northeast-3"
        -   Asia Pacific (Osaka-Local).
        -   Needs location constraint ap-northeast-3.
        -   Provider: AWS
    -   "ap-south-1"
        -   Asia Pacific (Mumbai).
        -   Needs location constraint ap-south-1.
        -   Provider: AWS
    -   "ap-east-1"
        -   Asia Pacific (Hong Kong) Region.
        -   Needs location constraint ap-east-1.
        -   Provider: AWS
    -   "sa-east-1"
        -   South America (Sao Paulo) Region.
        -   Needs location constraint sa-east-1.
        -   Provider: AWS
    -   "il-central-1"
        -   Israel (Tel Aviv) Region.
        -   Needs location constraint il-central-1.
        -   Provider: AWS
    -   "me-south-1"
        -   Middle East (Bahrain) Region.
        -   Needs location constraint me-south-1.
        -   Provider: AWS
    -   "af-south-1"
        -   Africa (Cape Town) Region.
        -   Needs location constraint af-south-1.
        -   Provider: AWS
    -   "cn-north-1"
        -   China (Beijing) Region.
        -   Needs location constraint cn-north-1.
        -   Provider: AWS
    -   "cn-northwest-1"
        -   China (Ningxia) Region.
        -   Needs location constraint cn-northwest-1.
        -   Provider: AWS
    -   "us-gov-east-1"
        -   AWS GovCloud (US-East) Region.
        -   Needs location constraint us-gov-east-1.
        -   Provider: AWS
    -   "us-gov-west-1"
        -   AWS GovCloud (US) Region.
        -   Needs location constraint us-gov-west-1.
        -   Provider: AWS
    -   "hn"
        -   Ha Noi
        -   Provider: BizflyCloud
    -   "hcm"
        -   Ho Chi Minh
        -   Provider: BizflyCloud
    -   ""
        -   Use this if unsure.
        -   Will use v4 signatures and an empty region.
        -   Provider:
            Ceph,DigitalOcean,Dreamhost,Exaba,GCS,HCP,IBMCOS,Leviia,LyveCloud,Minio,Netease,SeaweedFS,Wasabi,Other
    -   "other-v2-signature"
        -   Use this only if v4 signatures don't work.
        -   E.g. pre Jewel/v10 CEPH.
        -   Provider:
            Ceph,DigitalOcean,Dreamhost,Exaba,GCS,HCP,IBMCOS,Leviia,LyveCloud,Minio,Netease,SeaweedFS,Wasabi,Other
    -   "auto"
        -   R2 buckets are automatically distributed across Cloudflare's
            data centers for low latency.
        -   Provider: Cloudflare
    -   "eu-west-1"
        -   Europe West
        -   Provider: Cubbit
    -   "au-east-1"
        -   AU East 1
        -   Provider: Fastly
    -   "eu-central"
        -   EU Central
        -   Provider: Fastly
    -   "eu-south-1"
        -   EU South 1
        -   Provider: Fastly
    -   "eu-west-1"
        -   EU West 1
        -   Provider: Fastly
    -   "jp-central-1"
        -   JP Central 1
        -   Provider: Fastly
    -   "uk-east-1"
        -   UK East 1
        -   Provider: Fastly
    -   "us-central-1"
        -   US Central 1
        -   Provider: Fastly
    -   "us-east"
        -   US East
        -   Provider: Fastly
    -   "us-east-1"
        -   US East 1
        -   Provider: Fastly
    -   "us-west"
        -   US West
        -   Provider: Fastly
    -   "us-west-1"
        -   US West 1
        -   Provider: Fastly
    -   "global"
        -   Global
        -   Provider: FileLu
    -   "us-east"
        -   North America (US-East)
        -   Provider: FileLu
    -   "eu-central"
        -   Europe (EU-Central)
        -   Provider: FileLu
    -   "ap-southeast"
        -   Asia Pacific (AP-Southeast)
        -   Provider: FileLu
    -   "me-central"
        -   Middle East (ME-Central)
        -   Provider: FileLu
    -   "hel1"
        -   Helsinki
        -   Provider: Hetzner
    -   "fsn1"
        -   Falkenstein
        -   Provider: Hetzner
    -   "nbg1"
        -   Nuremberg
        -   Provider: Hetzner
    -   "af-south-1"
        -   AF-Johannesburg
        -   Provider: HuaweiOBS
    -   "ap-southeast-2"
        -   AP-Bangkok
        -   Provider: HuaweiOBS
    -   "ap-southeast-3"
        -   AP-Singapore
        -   Provider: HuaweiOBS
    -   "cn-east-3"
        -   CN East-Shanghai1
        -   Provider: HuaweiOBS
    -   "cn-east-2"
        -   CN East-Shanghai2
        -   Provider: HuaweiOBS
    -   "cn-north-1"
        -   CN North-Beijing1
        -   Provider: HuaweiOBS
    -   "cn-north-4"
        -   CN North-Beijing4
        -   Provider: HuaweiOBS
    -   "cn-south-1"
        -   CN South-Guangzhou
        -   Provider: HuaweiOBS
    -   "ap-southeast-1"
        -   CN-Hong Kong
        -   Provider: HuaweiOBS
    -   "sa-argentina-1"
        -   LA-Buenos Aires1
        -   Provider: HuaweiOBS
    -   "sa-peru-1"
        -   LA-Lima1
        -   Provider: HuaweiOBS
    -   "na-mexico-1"
        -   LA-Mexico City1
        -   Provider: HuaweiOBS
    -   "sa-chile-1"
        -   LA-Santiago2
        -   Provider: HuaweiOBS
    -   "sa-brazil-1"
        -   LA-Sao Paulo1
        -   Provider: HuaweiOBS
    -   "ru-northwest-2"
        -   RU-Moscow2
        -   Provider: HuaweiOBS
    -   "eu-central-2"
        -   Frankfurt, Germany
        -   Provider: ImpossibleCloud
    -   "eu-west-1"
        -   Amsterdam, Netherlands
        -   Provider: ImpossibleCloud
    -   "eu-west-2"
        -   London, UK
        -   Provider: ImpossibleCloud
    -   "eu-west-3"
        -   Paris, France
        -   Provider: ImpossibleCloud
    -   "eu-east-1"
        -   Poznań, Poland
        -   Provider: ImpossibleCloud
    -   "eu-north-1"
        -   Copenhagen, Denmark
        -   Provider: ImpossibleCloud
    -   "us-east-1"
        -   New York, USA
        -   Provider: ImpossibleCloud
    -   "de-fra"
        -   Frankfurt, Germany
        -   Provider: Intercolo
    -   "de"
        -   Frankfurt, Germany
        -   Provider: IONOS,OVHcloud
    -   "eu-central-2"
        -   Berlin, Germany
        -   Provider: IONOS
    -   "eu-central-3"
        -   Berlin, Germany
        -   Provider: IONOS
    -   "eu-central-4"
        -   Frankfurt, Germany
        -   Provider: IONOS
    -   "eu-south-2"
        -   Logrono, Spain
        -   Provider: IONOS
    -   "us-central-1"
        -   Lenexa, USA
        -   Provider: IONOS
    -   "eu-west-2"
        -   Paris, France
        -   Provider: Outscale
    -   "us-east-2"
        -   New Jersey, USA
        -   Provider: Outscale
    -   "us-west-1"
        -   California, USA
        -   Provider: Outscale
    -   "cloudgouv-eu-west-1"
        -   SecNumCloud, Paris, France
        -   Provider: Outscale
    -   "ap-northeast-1"
        -   Tokyo, Japan
        -   Provider: Outscale
    -   "gra"
        -   Gravelines, France
        -   Provider: OVHcloud
    -   "rbx"
        -   Roubaix, France
        -   Provider: OVHcloud
    -   "sbg"
        -   Strasbourg, France
        -   Provider: OVHcloud
    -   "eu-west-par"
        -   Paris, France (3AZ)
        -   Provider: OVHcloud
    -   "uk"
        -   London, United Kingdom
        -   Provider: OVHcloud
    -   "waw"
        -   Warsaw, Poland
        -   Provider: OVHcloud
    -   "bhs"
        -   Beauharnois, Canada
        -   Provider: OVHcloud
    -   "ca-east-tor"
        -   Toronto, Canada
        -   Provider: OVHcloud
    -   "sgp"
        -   Singapore
        -   Provider: OVHcloud
    -   "ap-southeast-syd"
        -   Sydney, Australia
        -   Provider: OVHcloud
    -   "ap-south-mum"
        -   Mumbai, India
        -   Provider: OVHcloud
    -   "us-east-va"
        -   Vint Hill, Virginia, USA
        -   Provider: OVHcloud
    -   "us-west-or"
        -   Hillsboro, Oregon, USA
        -   Provider: OVHcloud
    -   "rbx-archive"
        -   Roubaix, France (Cold Archive)
        -   Provider: OVHcloud
    -   "us-east-1"
        -   US East (N. Virginia)
        -   Provider: Petabox,Rabata
    -   "eu-central-1"
        -   Europe (Frankfurt)
        -   Provider: Petabox
    -   "ap-southeast-1"
        -   Asia Pacific (Singapore)
        -   Provider: Petabox
    -   "me-south-1"
        -   Middle East (Bahrain)
        -   Provider: Petabox
    -   "sa-east-1"
        -   South America (São Paulo)
        -   Provider: Petabox
    -   "cn-east-1"
        -   The default endpoint - a good choice if you are unsure.
        -   East China Region 1.
        -   Needs location constraint cn-east-1.
        -   Provider: Qiniu
    -   "cn-east-2"
        -   East China Region 2.
        -   Needs location constraint cn-east-2.
        -   Provider: Qiniu
    -   "cn-north-1"
        -   North China Region 1.
        -   Needs location constraint cn-north-1.
        -   Provider: Qiniu
    -   "cn-south-1"
        -   South China Region 1.
        -   Needs location constraint cn-south-1.
        -   Provider: Qiniu
    -   "us-north-1"
        -   North America Region.
        -   Needs location constraint us-north-1.
        -   Provider: Qiniu
    -   "ap-southeast-1"
        -   Southeast Asia Region 1.
        -   Needs location constraint ap-southeast-1.
        -   Provider: Qiniu
    -   "ap-northeast-1"
        -   Northeast Asia Region 1.
        -   Needs location constraint ap-northeast-1.
        -   Provider: Qiniu
    -   "eu-west-1"
        -   EU (Ireland)
        -   Provider: Rabata
    -   "eu-west-2"
        -   EU (London)
        -   Provider: Rabata
    -   "global"
        -   Global CDN (All locations) Region
        -   Provider: RackCorp
    -   "au"
        -   Australia (All states)
        -   Provider: RackCorp
    -   "au-nsw"
        -   NSW (Australia) Region
        -   Provider: RackCorp
    -   "au-qld"
        -   QLD (Australia) Region
        -   Provider: RackCorp
    -   "au-vic"
        -   VIC (Australia) Region
        -   Provider: RackCorp
    -   "au-wa"
        -   Perth (Australia) Region
        -   Provider: RackCorp
    -   "ph"
        -   Manila (Philippines) Region
        -   Provider: RackCorp
    -   "th"
        -   Bangkok (Thailand) Region
        -   Provider: RackCorp
    -   "hk"
        -   HK (Hong Kong) Region
        -   Provider: RackCorp
    -   "mn"
        -   Ulaanbaatar (Mongolia) Region
        -   Provider: RackCorp
    -   "kg"
        -   Bishkek (Kyrgyzstan) Region
        -   Provider: RackCorp
    -   "id"
        -   Jakarta (Indonesia) Region
        -   Provider: RackCorp
    -   "jp"
        -   Tokyo (Japan) Region
        -   Provider: RackCorp
    -   "sg"
        -   SG (Singapore) Region
        -   Provider: RackCorp
    -   "de"
        -   Frankfurt (Germany) Region
        -   Provider: RackCorp
    -   "us"
        -   USA (AnyCast) Region
        -   Provider: RackCorp
    -   "us-east-1"
        -   New York (USA) Region
        -   Provider: RackCorp
    -   "us-west-1"
        -   Freemont (USA) Region
        -   Provider: RackCorp
    -   "nz"
        -   Auckland (New Zealand) Region
        -   Provider: RackCorp
    -   "nl-ams"
        -   Amsterdam, The Netherlands
        -   Provider: Scaleway
    -   "fr-par"
        -   Paris, France
        -   Provider: Scaleway
    -   "pl-waw"
        -   Warsaw, Poland
        -   Provider: Scaleway
    -   "ru-1"
        -   St. Petersburg
        -   Provider: Selectel,Servercore
    -   "ru-3"
        -   St. Petersburg
        -   Provider: Selectel
    -   "ru-7"
        -   Moscow
        -   Provider: Selectel,Servercore
    -   "gis-1"
        -   Moscow
        -   Provider: Selectel,Servercore
    -   "kz-1"
        -   Kazakhstan
        -   Provider: Selectel
    -   "uz-2"
        -   Uzbekistan
        -   Provider: Selectel
    -   "uz-2"
        -   Tashkent, Uzbekistan
        -   Provider: Servercore
    -   "kz-1"
        -   Almaty, Kazakhstan
        -   Provider: Servercore
    -   "eu-001"
        -   Europe Region 1
        -   Provider: Synology
    -   "eu-002"
        -   Europe Region 2
        -   Provider: Synology
    -   "us-001"
        -   US Region 1
        -   Provider: Synology
    -   "us-002"
        -   US Region 2
        -   Provider: Synology
    -   "tw-001"
        -   Asia (Taiwan)
        -   Provider: Synology
    -   "us-east-1"
        -   The default region.
        -   Leave location constraint empty.
        -   Provider: Zadara
    -   "us-east-1"
        -   Indore, Madhya Pradesh, India
        -   Provider: Zata

--s3-endpoint

Endpoint for S3 API.

Required when using an S3 clone.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_S3_ENDPOINT
-   Provider:
    AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,ChinaMobile,Cloudflare,Cubbit,DigitalOcean,Dreamhost,Exaba,Fastly,FileLu,FlashBlade,GCS,HCP,Hetzner,HuaweiOBS,IBMCOS,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Mega,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,Rabata,RackCorp,Rclone,Scaleway,SeaweedFS,Selectel,Servercore,SpectraLogic,Storj,Synology,TencentCOS,US3,Wasabi,Zadara,Zata,Other
-   Type: string
-   Required: false
-   Examples:
    -   "oss-accelerate.aliyuncs.com"
        -   Global Accelerate
        -   Provider: Alibaba
    -   "oss-accelerate-overseas.aliyuncs.com"
        -   Global Accelerate (outside mainland China)
        -   Provider: Alibaba
    -   "oss-cn-hangzhou.aliyuncs.com"
        -   East China 1 (Hangzhou)
        -   Provider: Alibaba
    -   "oss-cn-shanghai.aliyuncs.com"
        -   East China 2 (Shanghai)
        -   Provider: Alibaba
    -   "oss-cn-qingdao.aliyuncs.com"
        -   North China 1 (Qingdao)
        -   Provider: Alibaba
    -   "oss-cn-beijing.aliyuncs.com"
        -   North China 2 (Beijing)
        -   Provider: Alibaba
    -   "oss-cn-zhangjiakou.aliyuncs.com"
        -   North China 3 (Zhangjiakou)
        -   Provider: Alibaba
    -   "oss-cn-huhehaote.aliyuncs.com"
        -   North China 5 (Hohhot)
        -   Provider: Alibaba
    -   "oss-cn-wulanchabu.aliyuncs.com"
        -   North China 6 (Ulanqab)
        -   Provider: Alibaba
    -   "oss-cn-shenzhen.aliyuncs.com"
        -   South China 1 (Shenzhen)
        -   Provider: Alibaba
    -   "oss-cn-heyuan.aliyuncs.com"
        -   South China 2 (Heyuan)
        -   Provider: Alibaba
    -   "oss-cn-guangzhou.aliyuncs.com"
        -   South China 3 (Guangzhou)
        -   Provider: Alibaba
    -   "oss-cn-chengdu.aliyuncs.com"
        -   West China 1 (Chengdu)
        -   Provider: Alibaba
    -   "oss-cn-hongkong.aliyuncs.com"
        -   Hong Kong (Hong Kong)
        -   Provider: Alibaba
    -   "oss-us-west-1.aliyuncs.com"
        -   US West 1 (Silicon Valley)
        -   Provider: Alibaba
    -   "oss-us-east-1.aliyuncs.com"
        -   US East 1 (Virginia)
        -   Provider: Alibaba
    -   "oss-ap-southeast-1.aliyuncs.com"
        -   Southeast Asia Southeast 1 (Singapore)
        -   Provider: Alibaba
    -   "oss-ap-southeast-2.aliyuncs.com"
        -   Asia Pacific Southeast 2 (Sydney)
        -   Provider: Alibaba
    -   "oss-ap-southeast-3.aliyuncs.com"
        -   Southeast Asia Southeast 3 (Kuala Lumpur)
        -   Provider: Alibaba
    -   "oss-ap-southeast-5.aliyuncs.com"
        -   Asia Pacific Southeast 5 (Jakarta)
        -   Provider: Alibaba
    -   "oss-ap-northeast-1.aliyuncs.com"
        -   Asia Pacific Northeast 1 (Japan)
        -   Provider: Alibaba
    -   "oss-ap-south-1.aliyuncs.com"
        -   Asia Pacific South 1 (Mumbai)
        -   Provider: Alibaba
    -   "oss-eu-central-1.aliyuncs.com"
        -   Central Europe 1 (Frankfurt)
        -   Provider: Alibaba
    -   "oss-eu-west-1.aliyuncs.com"
        -   West Europe (London)
        -   Provider: Alibaba
    -   "oss-me-east-1.aliyuncs.com"
        -   Middle East 1 (Dubai)
        -   Provider: Alibaba
    -   "s3.ir-thr-at1.arvanstorage.ir"
        -   The default endpoint - a good choice if you are unsure.
        -   Tehran Iran (Simin)
        -   Provider: ArvanCloud
    -   "s3.ir-tbz-sh1.arvanstorage.ir"
        -   Tabriz Iran (Shahriar)
        -   Provider: ArvanCloud
    -   "hn.ss.bfcplatform.vn"
        -   Hanoi endpoint
        -   Provider: BizflyCloud
    -   "hcm.ss.bfcplatform.vn"
        -   Ho Chi Minh endpoint
        -   Provider: BizflyCloud
    -   "eos-wuxi-1.cmecloud.cn"
        -   The default endpoint - a good choice if you are unsure.
        -   East China (Suzhou)
        -   Provider: ChinaMobile
    -   "eos-jinan-1.cmecloud.cn"
        -   East China (Jinan)
        -   Provider: ChinaMobile
    -   "eos-ningbo-1.cmecloud.cn"
        -   East China (Hangzhou)
        -   Provider: ChinaMobile
    -   "eos-shanghai-1.cmecloud.cn"
        -   East China (Shanghai-1)
        -   Provider: ChinaMobile
    -   "eos-zhengzhou-1.cmecloud.cn"
        -   Central China (Zhengzhou)
        -   Provider: ChinaMobile
    -   "eos-hunan-1.cmecloud.cn"
        -   Central China (Changsha-1)
        -   Provider: ChinaMobile
    -   "eos-zhuzhou-1.cmecloud.cn"
        -   Central China (Changsha-2)
        -   Provider: ChinaMobile
    -   "eos-guangzhou-1.cmecloud.cn"
        -   South China (Guangzhou-2)
        -   Provider: ChinaMobile
    -   "eos-dongguan-1.cmecloud.cn"
        -   South China (Guangzhou-3)
        -   Provider: ChinaMobile
    -   "eos-beijing-1.cmecloud.cn"
        -   North China (Beijing-1)
        -   Provider: ChinaMobile
    -   "eos-beijing-2.cmecloud.cn"
        -   North China (Beijing-2)
        -   Provider: ChinaMobile
    -   "eos-beijing-4.cmecloud.cn"
        -   North China (Beijing-3)
        -   Provider: ChinaMobile
    -   "eos-huhehaote-1.cmecloud.cn"
        -   North China (Huhehaote)
        -   Provider: ChinaMobile
    -   "eos-chengdu-1.cmecloud.cn"
        -   Southwest China (Chengdu)
        -   Provider: ChinaMobile
    -   "eos-chongqing-1.cmecloud.cn"
        -   Southwest China (Chongqing)
        -   Provider: ChinaMobile
    -   "eos-guiyang-1.cmecloud.cn"
        -   Southwest China (Guiyang)
        -   Provider: ChinaMobile
    -   "eos-xian-1.cmecloud.cn"
        -   Nouthwest China (Xian)
        -   Provider: ChinaMobile
    -   "eos-yunnan.cmecloud.cn"
        -   Yunnan China (Kunming)
        -   Provider: ChinaMobile
    -   "eos-yunnan-2.cmecloud.cn"
        -   Yunnan China (Kunming-2)
        -   Provider: ChinaMobile
    -   "eos-tianjin-1.cmecloud.cn"
        -   Tianjin China (Tianjin)
        -   Provider: ChinaMobile
    -   "eos-jilin-1.cmecloud.cn"
        -   Jilin China (Changchun)
        -   Provider: ChinaMobile
    -   "eos-hubei-1.cmecloud.cn"
        -   Hubei China (Xiangyan)
        -   Provider: ChinaMobile
    -   "eos-jiangxi-1.cmecloud.cn"
        -   Jiangxi China (Nanchang)
        -   Provider: ChinaMobile
    -   "eos-gansu-1.cmecloud.cn"
        -   Gansu China (Lanzhou)
        -   Provider: ChinaMobile
    -   "eos-shanxi-1.cmecloud.cn"
        -   Shanxi China (Taiyuan)
        -   Provider: ChinaMobile
    -   "eos-liaoning-1.cmecloud.cn"
        -   Liaoning China (Shenyang)
        -   Provider: ChinaMobile
    -   "eos-hebei-1.cmecloud.cn"
        -   Hebei China (Shijiazhuang)
        -   Provider: ChinaMobile
    -   "eos-fujian-1.cmecloud.cn"
        -   Fujian China (Xiamen)
        -   Provider: ChinaMobile
    -   "eos-guangxi-1.cmecloud.cn"
        -   Guangxi China (Nanning)
        -   Provider: ChinaMobile
    -   "eos-anhui-1.cmecloud.cn"
        -   Anhui China (Huainan)
        -   Provider: ChinaMobile
    -   "s3.cubbit.eu"
        -   Cubbit DS3 Object Storage endpoint
        -   Provider: Cubbit
    -   "s3.{tenant_name}.cubbit.eu"
        -   Multi-tenant endpoint - replace {tenant_name} with your
            actual tenant name. Do not select this directly
        -   Provider: Cubbit
    -   "syd1.digitaloceanspaces.com"
        -   DigitalOcean Spaces Sydney 1
        -   Provider: DigitalOcean
    -   "sfo3.digitaloceanspaces.com"
        -   DigitalOcean Spaces San Francisco 3
        -   Provider: DigitalOcean
    -   "sfo2.digitaloceanspaces.com"
        -   DigitalOcean Spaces San Francisco 2
        -   Provider: DigitalOcean
    -   "fra1.digitaloceanspaces.com"
        -   DigitalOcean Spaces Frankfurt 1
        -   Provider: DigitalOcean
    -   "nyc3.digitaloceanspaces.com"
        -   DigitalOcean Spaces New York 3
        -   Provider: DigitalOcean
    -   "ams3.digitaloceanspaces.com"
        -   DigitalOcean Spaces Amsterdam 3
        -   Provider: DigitalOcean
    -   "sgp1.digitaloceanspaces.com"
        -   DigitalOcean Spaces Singapore 1
        -   Provider: DigitalOcean
    -   "lon1.digitaloceanspaces.com"
        -   DigitalOcean Spaces London 1
        -   Provider: DigitalOcean
    -   "tor1.digitaloceanspaces.com"
        -   DigitalOcean Spaces Toronto 1
        -   Provider: DigitalOcean
    -   "blr1.digitaloceanspaces.com"
        -   DigitalOcean Spaces Bangalore 1
        -   Provider: DigitalOcean
    -   "objects-us-east-1.dream.io"
        -   Dream Objects endpoint
        -   Provider: Dreamhost
    -   "au-east-1.object.fastlystorage.app"
        -   AU East 1
        -   Provider: Fastly
    -   "eu-central.object.fastlystorage.app"
        -   EU Central
        -   Provider: Fastly
    -   "eu-south-1.object.fastlystorage.app"
        -   EU South 1
        -   Provider: Fastly
    -   "eu-west-1.object.fastlystorage.app"
        -   EU West 1
        -   Provider: Fastly
    -   "jp-central-1.object.fastlystorage.app"
        -   JP Central 1
        -   Provider: Fastly
    -   "uk-east-1.object.fastlystorage.app"
        -   UK East 1
        -   Provider: Fastly
    -   "us-central-1.object.fastlystorage.app"
        -   US Central 1
        -   Provider: Fastly
    -   "us-east.object.fastlystorage.app"
        -   US East
        -   Provider: Fastly
    -   "us-east-1.object.fastlystorage.app"
        -   US East 1
        -   Provider: Fastly
    -   "us-west.object.fastlystorage.app"
        -   US West
        -   Provider: Fastly
    -   "us-west-1.object.fastlystorage.app"
        -   US West 1
        -   Provider: Fastly
    -   "s5lu.com"
        -   Global FileLu S5 endpoint
        -   Provider: FileLu
    -   "us.s5lu.com"
        -   North America (US-East) region endpoint
        -   Provider: FileLu
    -   "eu.s5lu.com"
        -   Europe (EU-Central) region endpoint
        -   Provider: FileLu
    -   "ap.s5lu.com"
        -   Asia Pacific (AP-Southeast) region endpoint
        -   Provider: FileLu
    -   "me.s5lu.com"
        -   Middle East (ME-Central) region endpoint
        -   Provider: FileLu
    -   "https://storage.googleapis.com"
        -   Google Cloud Storage endpoint
        -   Provider: GCS
    -   "hel1.your-objectstorage.com"
        -   Helsinki
        -   Provider: Hetzner
    -   "fsn1.your-objectstorage.com"
        -   Falkenstein
        -   Provider: Hetzner
    -   "nbg1.your-objectstorage.com"
        -   Nuremberg
        -   Provider: Hetzner
    -   "obs.af-south-1.myhuaweicloud.com"
        -   AF-Johannesburg
        -   Provider: HuaweiOBS
    -   "obs.ap-southeast-2.myhuaweicloud.com"
        -   AP-Bangkok
        -   Provider: HuaweiOBS
    -   "obs.ap-southeast-3.myhuaweicloud.com"
        -   AP-Singapore
        -   Provider: HuaweiOBS
    -   "obs.cn-east-3.myhuaweicloud.com"
        -   CN East-Shanghai1
        -   Provider: HuaweiOBS
    -   "obs.cn-east-2.myhuaweicloud.com"
        -   CN East-Shanghai2
        -   Provider: HuaweiOBS
    -   "obs.cn-north-1.myhuaweicloud.com"
        -   CN North-Beijing1
        -   Provider: HuaweiOBS
    -   "obs.cn-north-4.myhuaweicloud.com"
        -   CN North-Beijing4
        -   Provider: HuaweiOBS
    -   "obs.cn-south-1.myhuaweicloud.com"
        -   CN South-Guangzhou
        -   Provider: HuaweiOBS
    -   "obs.ap-southeast-1.myhuaweicloud.com"
        -   CN-Hong Kong
        -   Provider: HuaweiOBS
    -   "obs.sa-argentina-1.myhuaweicloud.com"
        -   LA-Buenos Aires1
        -   Provider: HuaweiOBS
    -   "obs.sa-peru-1.myhuaweicloud.com"
        -   LA-Lima1
        -   Provider: HuaweiOBS
    -   "obs.na-mexico-1.myhuaweicloud.com"
        -   LA-Mexico City1
        -   Provider: HuaweiOBS
    -   "obs.sa-chile-1.myhuaweicloud.com"
        -   LA-Santiago2
        -   Provider: HuaweiOBS
    -   "obs.sa-brazil-1.myhuaweicloud.com"
        -   LA-Sao Paulo1
        -   Provider: HuaweiOBS
    -   "obs.ru-northwest-2.myhuaweicloud.com"
        -   RU-Moscow2
        -   Provider: HuaweiOBS
    -   "s3.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region Endpoint
        -   Provider: IBMCOS
    -   "s3.dal.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region Dallas Endpoint
        -   Provider: IBMCOS
    -   "s3.wdc.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region Washington DC Endpoint
        -   Provider: IBMCOS
    -   "s3.sjc.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region San Jose Endpoint
        -   Provider: IBMCOS
    -   "s3.private.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.dal.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region Dallas Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.wdc.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region Washington DC Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.sjc.us.cloud-object-storage.appdomain.cloud"
        -   US Cross Region San Jose Private Endpoint
        -   Provider: IBMCOS
    -   "s3.us-east.cloud-object-storage.appdomain.cloud"
        -   US Region East Endpoint
        -   Provider: IBMCOS
    -   "s3.private.us-east.cloud-object-storage.appdomain.cloud"
        -   US Region East Private Endpoint
        -   Provider: IBMCOS
    -   "s3.us-south.cloud-object-storage.appdomain.cloud"
        -   US Region South Endpoint
        -   Provider: IBMCOS
    -   "s3.private.us-south.cloud-object-storage.appdomain.cloud"
        -   US Region South Private Endpoint
        -   Provider: IBMCOS
    -   "s3.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Endpoint
        -   Provider: IBMCOS
    -   "s3.fra.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Frankfurt Endpoint
        -   Provider: IBMCOS
    -   "s3.mil.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Milan Endpoint
        -   Provider: IBMCOS
    -   "s3.ams.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Amsterdam Endpoint
        -   Provider: IBMCOS
    -   "s3.private.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.fra.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Frankfurt Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.mil.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Milan Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.ams.eu.cloud-object-storage.appdomain.cloud"
        -   EU Cross Region Amsterdam Private Endpoint
        -   Provider: IBMCOS
    -   "s3.eu-gb.cloud-object-storage.appdomain.cloud"
        -   Great Britain Endpoint
        -   Provider: IBMCOS
    -   "s3.private.eu-gb.cloud-object-storage.appdomain.cloud"
        -   Great Britain Private Endpoint
        -   Provider: IBMCOS
    -   "s3.eu-de.cloud-object-storage.appdomain.cloud"
        -   EU Region DE Endpoint
        -   Provider: IBMCOS
    -   "s3.private.eu-de.cloud-object-storage.appdomain.cloud"
        -   EU Region DE Private Endpoint
        -   Provider: IBMCOS
    -   "s3.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Endpoint
        -   Provider: IBMCOS
    -   "s3.tok.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Tokyo Endpoint
        -   Provider: IBMCOS
    -   "s3.hkg.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Hong Kong Endpoint
        -   Provider: IBMCOS
    -   "s3.seo.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Seoul Endpoint
        -   Provider: IBMCOS
    -   "s3.private.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.tok.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Tokyo Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.hkg.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Hong Kong Private Endpoint
        -   Provider: IBMCOS
    -   "s3.private.seo.ap.cloud-object-storage.appdomain.cloud"
        -   APAC Cross Regional Seoul Private Endpoint
        -   Provider: IBMCOS
    -   "s3.jp-tok.cloud-object-storage.appdomain.cloud"
        -   APAC Region Japan Endpoint
        -   Provider: IBMCOS
    -   "s3.private.jp-tok.cloud-object-storage.appdomain.cloud"
        -   APAC Region Japan Private Endpoint
        -   Provider: IBMCOS
    -   "s3.au-syd.cloud-object-storage.appdomain.cloud"
        -   APAC Region Australia Endpoint
        -   Provider: IBMCOS
    -   "s3.private.au-syd.cloud-object-storage.appdomain.cloud"
        -   APAC Region Australia Private Endpoint
        -   Provider: IBMCOS
    -   "s3.ams03.cloud-object-storage.appdomain.cloud"
        -   Amsterdam Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.ams03.cloud-object-storage.appdomain.cloud"
        -   Amsterdam Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.che01.cloud-object-storage.appdomain.cloud"
        -   Chennai Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.che01.cloud-object-storage.appdomain.cloud"
        -   Chennai Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.mel01.cloud-object-storage.appdomain.cloud"
        -   Melbourne Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.mel01.cloud-object-storage.appdomain.cloud"
        -   Melbourne Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.osl01.cloud-object-storage.appdomain.cloud"
        -   Oslo Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.osl01.cloud-object-storage.appdomain.cloud"
        -   Oslo Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.tor01.cloud-object-storage.appdomain.cloud"
        -   Toronto Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.tor01.cloud-object-storage.appdomain.cloud"
        -   Toronto Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.seo01.cloud-object-storage.appdomain.cloud"
        -   Seoul Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.seo01.cloud-object-storage.appdomain.cloud"
        -   Seoul Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.mon01.cloud-object-storage.appdomain.cloud"
        -   Montreal Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.mon01.cloud-object-storage.appdomain.cloud"
        -   Montreal Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.mex01.cloud-object-storage.appdomain.cloud"
        -   Mexico Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.mex01.cloud-object-storage.appdomain.cloud"
        -   Mexico Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.sjc04.cloud-object-storage.appdomain.cloud"
        -   San Jose Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.sjc04.cloud-object-storage.appdomain.cloud"
        -   San Jose Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.mil01.cloud-object-storage.appdomain.cloud"
        -   Milan Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.mil01.cloud-object-storage.appdomain.cloud"
        -   Milan Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.hkg02.cloud-object-storage.appdomain.cloud"
        -   Hong Kong Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.hkg02.cloud-object-storage.appdomain.cloud"
        -   Hong Kong Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.par01.cloud-object-storage.appdomain.cloud"
        -   Paris Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.par01.cloud-object-storage.appdomain.cloud"
        -   Paris Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "s3.sng01.cloud-object-storage.appdomain.cloud"
        -   Singapore Single Site Endpoint
        -   Provider: IBMCOS
    -   "s3.private.sng01.cloud-object-storage.appdomain.cloud"
        -   Singapore Single Site Private Endpoint
        -   Provider: IBMCOS
    -   "eu-central-2.storage.impossibleapi.net"
        -   Frankfurt, Germany
        -   Provider: ImpossibleCloud
    -   "eu-west-1.storage.impossibleapi.net"
        -   Amsterdam, Netherlands
        -   Provider: ImpossibleCloud
    -   "eu-west-2.storage.impossibleapi.net"
        -   London, UK
        -   Provider: ImpossibleCloud
    -   "eu-west-3.storage.impossibleapi.net"
        -   Paris, France
        -   Provider: ImpossibleCloud
    -   "eu-east-1.storage.impossibleapi.net"
        -   Poznań, Poland
        -   Provider: ImpossibleCloud
    -   "eu-north-1.storage.impossibleapi.net"
        -   Copenhagen, Denmark
        -   Provider: ImpossibleCloud
    -   "us-east-1.storage.impossibleapi.net"
        -   New York, USA
        -   Provider: ImpossibleCloud
    -   "de-fra.i3storage.com"
        -   Frankfurt, Germany
        -   Provider: Intercolo
    -   "s3.eu-central-1.ionoscloud.com"
        -   Frankfurt, Germany
        -   Provider: IONOS
    -   "s3.eu-central-2.ionoscloud.com"
        -   Berlin, Germany
        -   Provider: IONOS
    -   "s3.eu-central-3.ionoscloud.com"
        -   Berlin, Germany
        -   Provider: IONOS
    -   "s3.eu-central-4.ionoscloud.com"
        -   Frankfurt, Germany
        -   Provider: IONOS
    -   "s3.eu-south-2.ionoscloud.com"
        -   Logrono, Spain
        -   Provider: IONOS
    -   "s3.us-central-1.ionoscloud.com"
        -   Lenexa, USA
        -   Provider: IONOS
    -   "s3.leviia.com"
        -   The default endpoint
        -   Leviia
        -   Provider: Leviia
    -   "storage.iran.liara.space"
        -   The default endpoint
        -   Iran
        -   Provider: Liara
    -   "nl-ams-1.linodeobjects.com"
        -   Amsterdam, NL (nl-ams-1)
        -   Provider: Linode
    -   "us-southeast-1.linodeobjects.com"
        -   Atlanta, GA, US (us-southeast-1)
        -   Provider: Linode
    -   "in-maa-1.linodeobjects.com"
        -   Chennai, IN (in-maa-1)
        -   Provider: Linode
    -   "us-ord-1.linodeobjects.com"
        -   Chicago, IL, US (us-ord-1)
        -   Provider: Linode
    -   "eu-central-1.linodeobjects.com"
        -   Frankfurt, DE (eu-central-1)
        -   Provider: Linode
    -   "id-cgk-1.linodeobjects.com"
        -   Jakarta, ID (id-cgk-1)
        -   Provider: Linode
    -   "gb-lon-1.linodeobjects.com"
        -   London 2, UK (gb-lon-1)
        -   Provider: Linode
    -   "us-lax-1.linodeobjects.com"
        -   Los Angeles, CA, US (us-lax-1)
        -   Provider: Linode
    -   "es-mad-1.linodeobjects.com"
        -   Madrid, ES (es-mad-1)
        -   Provider: Linode
    -   "us-mia-1.linodeobjects.com"
        -   Miami, FL, US (us-mia-1)
        -   Provider: Linode
    -   "it-mil-1.linodeobjects.com"
        -   Milan, IT (it-mil-1)
        -   Provider: Linode
    -   "us-east-1.linodeobjects.com"
        -   Newark, NJ, US (us-east-1)
        -   Provider: Linode
    -   "jp-osa-1.linodeobjects.com"
        -   Osaka, JP (jp-osa-1)
        -   Provider: Linode
    -   "fr-par-1.linodeobjects.com"
        -   Paris, FR (fr-par-1)
        -   Provider: Linode
    -   "br-gru-1.linodeobjects.com"
        -   Sao Paulo, BR (br-gru-1)
        -   Provider: Linode
    -   "us-sea-1.linodeobjects.com"
        -   Seattle, WA, US (us-sea-1)
        -   Provider: Linode
    -   "ap-south-1.linodeobjects.com"
        -   Singapore, SG (ap-south-1)
        -   Provider: Linode
    -   "sg-sin-1.linodeobjects.com"
        -   Singapore 2, SG (sg-sin-1)
        -   Provider: Linode
    -   "se-sto-1.linodeobjects.com"
        -   Stockholm, SE (se-sto-1)
        -   Provider: Linode
    -   "jp-tyo-1.linodeobjects.com"
        -   Tokyo 3, JP (jp-tyo-1)
        -   Provider: Linode
    -   "us-iad-10.linodeobjects.com"
        -   Washington, DC, US (us-iad-10)
        -   Provider: Linode
    -   "s3.us-west-1.{account_name}.lyve.seagate.com"
        -   US West 1 - California
        -   Provider: LyveCloud
    -   "s3.eu-west-1.{account_name}.lyve.seagate.com"
        -   EU West 1 - Ireland
        -   Provider: LyveCloud
    -   "br-se1.magaluobjects.com"
        -   São Paulo, SP (BR), br-se1
        -   Provider: Magalu
    -   "br-ne1.magaluobjects.com"
        -   Fortaleza, CE (BR), br-ne1
        -   Provider: Magalu
    -   "s3.eu-amsterdam.megas4.com"
        -   Mega S4 Amsterdam
        -   Provider: Mega
    -   "s3.eu-luxembourg.megas4.com"
        -   Mega S4 Luxembourg
        -   Provider: Mega
    -   "s3.eu-paris.megas4.com"
        -   Mega S4 Paris
        -   Provider: Mega
    -   "s3.eu-barcelona.megas4.com"
        -   Mega S4 Barcelona
        -   Provider: Mega
    -   "s3.ca-montreal.megas4.com"
        -   Mega S4 Montreal
        -   Provider: Mega
    -   "s3.ca-vancouver.megas4.com"
        -   Mega S4 Vancouver
        -   Provider: Mega
    -   "s3.ap-tokyo.megas4.com"
        -   Mega S4 Tokyo
        -   Provider: Mega
    -   "s3.eu-central-1.s4.mega.io"
        -   Mega S4 eu-central-1 (Amsterdam, legacy)
        -   Provider: Mega
    -   "s3.eu-central-2.s4.mega.io"
        -   Mega S4 eu-central-2 (Bettembourg, legacy)
        -   Provider: Mega
    -   "s3.ca-central-1.s4.mega.io"
        -   Mega S4 ca-central-1 (Montreal, legacy)
        -   Provider: Mega
    -   "s3.ca-west-1.s4.mega.io"
        -   Mega S4 ca-west-1 (Vancouver, legacy)
        -   Provider: Mega
    -   "oos.eu-west-2.outscale.com"
        -   Outscale EU West 2 (Paris)
        -   Provider: Outscale
    -   "oos.us-east-2.outscale.com"
        -   Outscale US east 2 (New Jersey)
        -   Provider: Outscale
    -   "oos.us-west-1.outscale.com"
        -   Outscale EU West 1 (California)
        -   Provider: Outscale
    -   "oos.cloudgouv-eu-west-1.outscale.com"
        -   Outscale SecNumCloud (Paris)
        -   Provider: Outscale
    -   "oos.ap-northeast-1.outscale.com"
        -   Outscale AP Northeast 1 (Japan)
        -   Provider: Outscale
    -   "s3.gra.io.cloud.ovh.net"
        -   OVHcloud Gravelines, France
        -   Provider: OVHcloud
    -   "s3.rbx.io.cloud.ovh.net"
        -   OVHcloud Roubaix, France
        -   Provider: OVHcloud
    -   "s3.sbg.io.cloud.ovh.net"
        -   OVHcloud Strasbourg, France
        -   Provider: OVHcloud
    -   "s3.eu-west-par.io.cloud.ovh.net"
        -   OVHcloud Paris, France (3AZ)
        -   Provider: OVHcloud
    -   "s3.de.io.cloud.ovh.net"
        -   OVHcloud Frankfurt, Germany
        -   Provider: OVHcloud
    -   "s3.uk.io.cloud.ovh.net"
        -   OVHcloud London, United Kingdom
        -   Provider: OVHcloud
    -   "s3.waw.io.cloud.ovh.net"
        -   OVHcloud Warsaw, Poland
        -   Provider: OVHcloud
    -   "s3.bhs.io.cloud.ovh.net"
        -   OVHcloud Beauharnois, Canada
        -   Provider: OVHcloud
    -   "s3.ca-east-tor.io.cloud.ovh.net"
        -   OVHcloud Toronto, Canada
        -   Provider: OVHcloud
    -   "s3.sgp.io.cloud.ovh.net"
        -   OVHcloud Singapore
        -   Provider: OVHcloud
    -   "s3.ap-southeast-syd.io.cloud.ovh.net"
        -   OVHcloud Sydney, Australia
        -   Provider: OVHcloud
    -   "s3.ap-south-mum.io.cloud.ovh.net"
        -   OVHcloud Mumbai, India
        -   Provider: OVHcloud
    -   "s3.us-east-va.io.cloud.ovh.us"
        -   OVHcloud Vint Hill, Virginia, USA
        -   Provider: OVHcloud
    -   "s3.us-west-or.io.cloud.ovh.us"
        -   OVHcloud Hillsboro, Oregon, USA
        -   Provider: OVHcloud
    -   "s3.rbx-archive.io.cloud.ovh.net"
        -   OVHcloud Roubaix, France (Cold Archive)
        -   Provider: OVHcloud
    -   "s3.petabox.io"
        -   US East (N. Virginia)
        -   Provider: Petabox
    -   "s3.us-east-1.petabox.io"
        -   US East (N. Virginia)
        -   Provider: Petabox
    -   "s3.eu-central-1.petabox.io"
        -   Europe (Frankfurt)
        -   Provider: Petabox
    -   "s3.ap-southeast-1.petabox.io"
        -   Asia Pacific (Singapore)
        -   Provider: Petabox
    -   "s3.me-south-1.petabox.io"
        -   Middle East (Bahrain)
        -   Provider: Petabox
    -   "s3.sa-east-1.petabox.io"
        -   South America (São Paulo)
        -   Provider: Petabox
    -   "s3-cn-east-1.qiniucs.com"
        -   East China Endpoint 1
        -   Provider: Qiniu
    -   "s3-cn-east-2.qiniucs.com"
        -   East China Endpoint 2
        -   Provider: Qiniu
    -   "s3-cn-north-1.qiniucs.com"
        -   North China Endpoint 1
        -   Provider: Qiniu
    -   "s3-cn-south-1.qiniucs.com"
        -   South China Endpoint 1
        -   Provider: Qiniu
    -   "s3-us-north-1.qiniucs.com"
        -   North America Endpoint 1
        -   Provider: Qiniu
    -   "s3-ap-southeast-1.qiniucs.com"
        -   Southeast Asia Endpoint 1
        -   Provider: Qiniu
    -   "s3-ap-northeast-1.qiniucs.com"
        -   Northeast Asia Endpoint 1
        -   Provider: Qiniu
    -   "s3.us-east-1.rabata.io"
        -   US East (N. Virginia)
        -   Provider: Rabata
    -   "s3.eu-west-1.rabata.io"
        -   EU West (Ireland)
        -   Provider: Rabata
    -   "s3.eu-west-2.rabata.io"
        -   EU West (London)
        -   Provider: Rabata
    -   "s3.rackcorp.com"
        -   Global (AnyCast) Endpoint
        -   Provider: RackCorp
    -   "au.s3.rackcorp.com"
        -   Australia (Anycast) Endpoint
        -   Provider: RackCorp
    -   "au-nsw.s3.rackcorp.com"
        -   Sydney (Australia) Endpoint
        -   Provider: RackCorp
    -   "au-qld.s3.rackcorp.com"
        -   Brisbane (Australia) Endpoint
        -   Provider: RackCorp
    -   "au-vic.s3.rackcorp.com"
        -   Melbourne (Australia) Endpoint
        -   Provider: RackCorp
    -   "au-wa.s3.rackcorp.com"
        -   Perth (Australia) Endpoint
        -   Provider: RackCorp
    -   "ph.s3.rackcorp.com"
        -   Manila (Philippines) Endpoint
        -   Provider: RackCorp
    -   "th.s3.rackcorp.com"
        -   Bangkok (Thailand) Endpoint
        -   Provider: RackCorp
    -   "hk.s3.rackcorp.com"
        -   HK (Hong Kong) Endpoint
        -   Provider: RackCorp
    -   "mn.s3.rackcorp.com"
        -   Ulaanbaatar (Mongolia) Endpoint
        -   Provider: RackCorp
    -   "kg.s3.rackcorp.com"
        -   Bishkek (Kyrgyzstan) Endpoint
        -   Provider: RackCorp
    -   "id.s3.rackcorp.com"
        -   Jakarta (Indonesia) Endpoint
        -   Provider: RackCorp
    -   "jp.s3.rackcorp.com"
        -   Tokyo (Japan) Endpoint
        -   Provider: RackCorp
    -   "sg.s3.rackcorp.com"
        -   SG (Singapore) Endpoint
        -   Provider: RackCorp
    -   "de.s3.rackcorp.com"
        -   Frankfurt (Germany) Endpoint
        -   Provider: RackCorp
    -   "us.s3.rackcorp.com"
        -   USA (AnyCast) Endpoint
        -   Provider: RackCorp
    -   "us-east-1.s3.rackcorp.com"
        -   New York (USA) Endpoint
        -   Provider: RackCorp
    -   "us-west-1.s3.rackcorp.com"
        -   Freemont (USA) Endpoint
        -   Provider: RackCorp
    -   "nz.s3.rackcorp.com"
        -   Auckland (New Zealand) Endpoint
        -   Provider: RackCorp
    -   "s3.nl-ams.scw.cloud"
        -   Amsterdam Endpoint
        -   Provider: Scaleway
    -   "s3.fr-par.scw.cloud"
        -   Paris Endpoint
        -   Provider: Scaleway
    -   "s3.pl-waw.scw.cloud"
        -   Warsaw Endpoint
        -   Provider: Scaleway
    -   "localhost:8333"
        -   SeaweedFS S3 localhost
        -   Provider: SeaweedFS
    -   "s3.ru-1.storage.selcloud.ru"
        -   St. Petersburg
        -   Provider: Selectel
    -   "s3.ru-3.storage.selcloud.ru"
        -   St. Petersburg
        -   Provider: Selectel
    -   "s3.ru-7.storage.selcloud.ru"
        -   Moscow
        -   Provider: Selectel,Servercore
    -   "s3.gis-1.storage.selcloud.ru"
        -   Moscow
        -   Provider: Selectel,Servercore
    -   "s3.kz-1.storage.selcloud.ru"
        -   Kazakhstan
        -   Provider: Selectel
    -   "s3.uz-2.storage.selcloud.ru"
        -   Uzbekistan
        -   Provider: Selectel
    -   "s3.ru-1.storage.selcloud.ru"
        -   Saint Petersburg
        -   Provider: Servercore
    -   "s3.uz-2.srvstorage.uz"
        -   Tashkent, Uzbekistan
        -   Provider: Servercore
    -   "s3.kz-1.srvstorage.kz"
        -   Almaty, Kazakhstan
        -   Provider: Servercore
    -   "gateway.storjshare.io"
        -   Global Hosted Gateway
        -   Provider: Storj
    -   "eu-001.s3.synologyc2.net"
        -   EU Endpoint 1
        -   Provider: Synology
    -   "eu-002.s3.synologyc2.net"
        -   EU Endpoint 2
        -   Provider: Synology
    -   "us-001.s3.synologyc2.net"
        -   US Endpoint 1
        -   Provider: Synology
    -   "us-002.s3.synologyc2.net"
        -   US Endpoint 2
        -   Provider: Synology
    -   "tw-001.s3.synologyc2.net"
        -   TW Endpoint 1
        -   Provider: Synology
    -   "cos.ap-beijing.myqcloud.com"
        -   Beijing Region
        -   Provider: TencentCOS
    -   "cos.ap-nanjing.myqcloud.com"
        -   Nanjing Region
        -   Provider: TencentCOS
    -   "cos.ap-shanghai.myqcloud.com"
        -   Shanghai Region
        -   Provider: TencentCOS
    -   "cos.ap-guangzhou.myqcloud.com"
        -   Guangzhou Region
        -   Provider: TencentCOS
    -   "cos.ap-chengdu.myqcloud.com"
        -   Chengdu Region
        -   Provider: TencentCOS
    -   "cos.ap-chongqing.myqcloud.com"
        -   Chongqing Region
        -   Provider: TencentCOS
    -   "cos.ap-hongkong.myqcloud.com"
        -   Hong Kong (China) Region
        -   Provider: TencentCOS
    -   "cos.ap-singapore.myqcloud.com"
        -   Singapore Region
        -   Provider: TencentCOS
    -   "cos.ap-mumbai.myqcloud.com"
        -   Mumbai Region
        -   Provider: TencentCOS
    -   "cos.ap-seoul.myqcloud.com"
        -   Seoul Region
        -   Provider: TencentCOS
    -   "cos.ap-bangkok.myqcloud.com"
        -   Bangkok Region
        -   Provider: TencentCOS
    -   "cos.ap-tokyo.myqcloud.com"
        -   Tokyo Region
        -   Provider: TencentCOS
    -   "cos.na-siliconvalley.myqcloud.com"
        -   Silicon Valley Region
        -   Provider: TencentCOS
    -   "cos.na-ashburn.myqcloud.com"
        -   Virginia Region
        -   Provider: TencentCOS
    -   "cos.na-toronto.myqcloud.com"
        -   Toronto Region
        -   Provider: TencentCOS
    -   "cos.eu-frankfurt.myqcloud.com"
        -   Frankfurt Region
        -   Provider: TencentCOS
    -   "cos.eu-moscow.myqcloud.com"
        -   Moscow Region
        -   Provider: TencentCOS
    -   "cos.accelerate.myqcloud.com"
        -   Use Tencent COS Accelerate Endpoint
        -   Provider: TencentCOS
    -   "s3-cn-bj.ufileos.com"
        -   North China (Beijing 2)
        -   Provider: US3
    -   "s3-cn-wlcb.ufileos.com"
        -   North China (Ulanqab)
        -   Provider: US3
    -   "s3-cn-sh2.ufileos.com"
        -   Shanghai
        -   Provider: US3
    -   "s3-cn-gd.ufileos.com"
        -   South China (Guangzhou)
        -   Provider: US3
    -   "s3-hk.ufileos.com"
        -   Hongkong
        -   Provider: US3
    -   "s3-us-ca.ufileos.com"
        -   United States (Los Angeles)
        -   Provider: US3
    -   "s3-sg.ufileos.com"
        -   Singapore
        -   Provider: US3
    -   "s3-idn-jakarta.ufileos.com"
        -   Indonesia (Jakarta)
        -   Provider: US3
    -   "s3-tw-tp.ufileos.com"
        -   Taiwan (Taipei)
        -   Provider: US3
    -   "s3-afr-nigeria.ufileos.com"
        -   Nigeria (Lagos)
        -   Provider: US3
    -   "s3-bra-saopaulo.ufileos.com"
        -   Brazil (São Paulo)
        -   Provider: US3
    -   "s3-uae-dubai.ufileos.com"
        -   United Arab Emirates (Dubai)
        -   Provider: US3
    -   "s3-ge-fra.ufileos.com"
        -   Germany (Frankfurt)
        -   Provider: US3
    -   "s3-vn-sng.ufileos.com"
        -   Vietnam (Ho Chi Minh City)
        -   Provider: US3
    -   "s3-us-ws.ufileos.com"
        -   United States (Washington)
        -   Provider: US3
    -   "s3-ind-mumbai.ufileos.com"
        -   India (Mumbai)
        -   Provider: US3
    -   "s3-kr-seoul.ufileos.com"
        -   Seoul (South Korea)
        -   Provider: US3
    -   "s3-jpn-tky.ufileos.com"
        -   Japan (Tokyo)
        -   Provider: US3
    -   "s3-th-bkk.ufileos.com"
        -   Bangkok (Thailand)
        -   Provider: US3
    -   "s3-uk-london.ufileos.com"
        -   United Kingdom (London)
        -   Provider: US3
    -   "s3-rus-mosc.ufileos.com"
        -   Russia (Moscow)
        -   Provider: US3
    -   "s3-cn-guiyang1.ufileos.com"
        -   Guiyang 1
        -   Provider: US3
    -   "s3-pk-khi.ufileos.com"
        -   Pakistan
        -   Provider: US3
    -   "s3.wasabisys.com"
        -   Wasabi US East 1 (N. Virginia)
        -   Provider: Wasabi
    -   "s3.us-east-2.wasabisys.com"
        -   Wasabi US East 2 (N. Virginia)
        -   Provider: Wasabi
    -   "s3.us-central-1.wasabisys.com"
        -   Wasabi US Central 1 (Texas)
        -   Provider: Wasabi
    -   "s3.us-west-1.wasabisys.com"
        -   Wasabi US West 1 (Oregon)
        -   Provider: Wasabi
    -   "s3.ca-central-1.wasabisys.com"
        -   Wasabi CA Central 1 (Toronto)
        -   Provider: Wasabi
    -   "s3.eu-central-1.wasabisys.com"
        -   Wasabi EU Central 1 (Amsterdam)
        -   Provider: Wasabi
    -   "s3.eu-central-2.wasabisys.com"
        -   Wasabi EU Central 2 (Frankfurt)
        -   Provider: Wasabi
    -   "s3.eu-west-1.wasabisys.com"
        -   Wasabi EU West 1 (London)
        -   Provider: Wasabi
    -   "s3.eu-west-2.wasabisys.com"
        -   Wasabi EU West 2 (Paris)
        -   Provider: Wasabi
    -   "s3.eu-south-1.wasabisys.com"
        -   Wasabi EU South 1 (Milan)
        -   Provider: Wasabi
    -   "s3.ap-northeast-1.wasabisys.com"
        -   Wasabi AP Northeast 1 (Tokyo) endpoint
        -   Provider: Wasabi
    -   "s3.ap-northeast-2.wasabisys.com"
        -   Wasabi AP Northeast 2 (Osaka) endpoint
        -   Provider: Wasabi
    -   "s3.ap-southeast-1.wasabisys.com"
        -   Wasabi AP Southeast 1 (Singapore)
        -   Provider: Wasabi
    -   "s3.ap-southeast-2.wasabisys.com"
        -   Wasabi AP Southeast 2 (Sydney)
        -   Provider: Wasabi
    -   "idr01.zata.ai"
        -   South Asia Endpoint
        -   Provider: Zata

--s3-location-constraint

Location constraint - must be set to match the Region.

Leave blank if not sure. Used when creating buckets only.

Properties:

-   Config: location_constraint
-   Env Var: RCLONE_S3_LOCATION_CONSTRAINT
-   Provider:
    AWS,ArvanCloud,Ceph,ChinaMobile,DigitalOcean,Dreamhost,Exaba,GCS,HCP,Hetzner,IBMCOS,ImpossibleCloud,LyveCloud,Minio,Netease,Qiniu,Rabata,RackCorp,SeaweedFS,Synology,Wasabi,Zata,Other
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   Empty for US Region, Northern Virginia, or Pacific Northwest
        -   Provider: AWS
    -   "us-east-2"
        -   US East (Ohio) Region
        -   Provider: AWS
    -   "us-west-1"
        -   US West (Northern California) Region
        -   Provider: AWS
    -   "us-west-2"
        -   US West (Oregon) Region
        -   Provider: AWS
    -   "ca-central-1"
        -   Canada (Central) Region
        -   Provider: AWS
    -   "eu-west-1"
        -   EU (Ireland) Region
        -   Provider: AWS
    -   "eu-west-2"
        -   EU (London) Region
        -   Provider: AWS
    -   "eu-west-3"
        -   EU (Paris) Region
        -   Provider: AWS
    -   "eu-north-1"
        -   EU (Stockholm) Region
        -   Provider: AWS
    -   "eu-south-1"
        -   EU (Milan) Region
        -   Provider: AWS
    -   "EU"
        -   EU Region
        -   Provider: AWS
    -   "ap-southeast-1"
        -   Asia Pacific (Singapore) Region
        -   Provider: AWS
    -   "ap-southeast-2"
        -   Asia Pacific (Sydney) Region
        -   Provider: AWS
    -   "ap-northeast-1"
        -   Asia Pacific (Tokyo) Region
        -   Provider: AWS
    -   "ap-northeast-2"
        -   Asia Pacific (Seoul) Region
        -   Provider: AWS
    -   "ap-northeast-3"
        -   Asia Pacific (Osaka-Local) Region
        -   Provider: AWS
    -   "ap-south-1"
        -   Asia Pacific (Mumbai) Region
        -   Provider: AWS
    -   "ap-east-1"
        -   Asia Pacific (Hong Kong) Region
        -   Provider: AWS
    -   "sa-east-1"
        -   South America (Sao Paulo) Region
        -   Provider: AWS
    -   "il-central-1"
        -   Israel (Tel Aviv) Region
        -   Provider: AWS
    -   "me-south-1"
        -   Middle East (Bahrain) Region
        -   Provider: AWS
    -   "af-south-1"
        -   Africa (Cape Town) Region
        -   Provider: AWS
    -   "cn-north-1"
        -   China (Beijing) Region
        -   Provider: AWS
    -   "cn-northwest-1"
        -   China (Ningxia) Region
        -   Provider: AWS
    -   "us-gov-east-1"
        -   AWS GovCloud (US-East) Region
        -   Provider: AWS
    -   "us-gov-west-1"
        -   AWS GovCloud (US) Region
        -   Provider: AWS
    -   "ir-thr-at1"
        -   Tehran Iran (Simin)
        -   Provider: ArvanCloud
    -   "ir-tbz-sh1"
        -   Tabriz Iran (Shahriar)
        -   Provider: ArvanCloud
    -   "wuxi1"
        -   East China (Suzhou)
        -   Provider: ChinaMobile
    -   "jinan1"
        -   East China (Jinan)
        -   Provider: ChinaMobile
    -   "ningbo1"
        -   East China (Hangzhou)
        -   Provider: ChinaMobile
    -   "shanghai1"
        -   East China (Shanghai-1)
        -   Provider: ChinaMobile
    -   "zhengzhou1"
        -   Central China (Zhengzhou)
        -   Provider: ChinaMobile
    -   "hunan1"
        -   Central China (Changsha-1)
        -   Provider: ChinaMobile
    -   "zhuzhou1"
        -   Central China (Changsha-2)
        -   Provider: ChinaMobile
    -   "guangzhou1"
        -   South China (Guangzhou-2)
        -   Provider: ChinaMobile
    -   "dongguan1"
        -   South China (Guangzhou-3)
        -   Provider: ChinaMobile
    -   "beijing1"
        -   North China (Beijing-1)
        -   Provider: ChinaMobile
    -   "beijing2"
        -   North China (Beijing-2)
        -   Provider: ChinaMobile
    -   "beijing4"
        -   North China (Beijing-3)
        -   Provider: ChinaMobile
    -   "huhehaote1"
        -   North China (Huhehaote)
        -   Provider: ChinaMobile
    -   "chengdu1"
        -   Southwest China (Chengdu)
        -   Provider: ChinaMobile
    -   "chongqing1"
        -   Southwest China (Chongqing)
        -   Provider: ChinaMobile
    -   "guiyang1"
        -   Southwest China (Guiyang)
        -   Provider: ChinaMobile
    -   "xian1"
        -   Northwest China (Xian)
        -   Provider: ChinaMobile
    -   "yunnan"
        -   Yunnan China (Kunming)
        -   Provider: ChinaMobile
    -   "yunnan2"
        -   Yunnan China (Kunming-2)
        -   Provider: ChinaMobile
    -   "tianjin1"
        -   Tianjin China (Tianjin)
        -   Provider: ChinaMobile
    -   "jilin1"
        -   Jilin China (Changchun)
        -   Provider: ChinaMobile
    -   "hubei1"
        -   Hubei China (Xiangyan)
        -   Provider: ChinaMobile
    -   "jiangxi1"
        -   Jiangxi China (Nanchang)
        -   Provider: ChinaMobile
    -   "gansu1"
        -   Gansu China (Lanzhou)
        -   Provider: ChinaMobile
    -   "shanxi1"
        -   Shanxi China (Taiyuan)
        -   Provider: ChinaMobile
    -   "liaoning1"
        -   Liaoning China (Shenyang)
        -   Provider: ChinaMobile
    -   "hebei1"
        -   Hebei China (Shijiazhuang)
        -   Provider: ChinaMobile
    -   "fujian1"
        -   Fujian China (Xiamen)
        -   Provider: ChinaMobile
    -   "guangxi1"
        -   Guangxi China (Nanning)
        -   Provider: ChinaMobile
    -   "anhui1"
        -   Anhui China (Huainan)
        -   Provider: ChinaMobile
    -   "us-standard"
        -   US Cross Region Standard
        -   Provider: IBMCOS
    -   "us-vault"
        -   US Cross Region Vault
        -   Provider: IBMCOS
    -   "us-cold"
        -   US Cross Region Cold
        -   Provider: IBMCOS
    -   "us-flex"
        -   US Cross Region Flex
        -   Provider: IBMCOS
    -   "us-east-standard"
        -   US East Region Standard
        -   Provider: IBMCOS
    -   "us-east-vault"
        -   US East Region Vault
        -   Provider: IBMCOS
    -   "us-east-cold"
        -   US East Region Cold
        -   Provider: IBMCOS
    -   "us-east-flex"
        -   US East Region Flex
        -   Provider: IBMCOS
    -   "us-south-standard"
        -   US South Region Standard
        -   Provider: IBMCOS
    -   "us-south-vault"
        -   US South Region Vault
        -   Provider: IBMCOS
    -   "us-south-cold"
        -   US South Region Cold
        -   Provider: IBMCOS
    -   "us-south-flex"
        -   US South Region Flex
        -   Provider: IBMCOS
    -   "eu-standard"
        -   EU Cross Region Standard
        -   Provider: IBMCOS
    -   "eu-vault"
        -   EU Cross Region Vault
        -   Provider: IBMCOS
    -   "eu-cold"
        -   EU Cross Region Cold
        -   Provider: IBMCOS
    -   "eu-flex"
        -   EU Cross Region Flex
        -   Provider: IBMCOS
    -   "eu-gb-standard"
        -   Great Britain Standard
        -   Provider: IBMCOS
    -   "eu-gb-vault"
        -   Great Britain Vault
        -   Provider: IBMCOS
    -   "eu-gb-cold"
        -   Great Britain Cold
        -   Provider: IBMCOS
    -   "eu-gb-flex"
        -   Great Britain Flex
        -   Provider: IBMCOS
    -   "ap-standard"
        -   APAC Standard
        -   Provider: IBMCOS
    -   "ap-vault"
        -   APAC Vault
        -   Provider: IBMCOS
    -   "ap-cold"
        -   APAC Cold
        -   Provider: IBMCOS
    -   "ap-flex"
        -   APAC Flex
        -   Provider: IBMCOS
    -   "mel01-standard"
        -   Melbourne Standard
        -   Provider: IBMCOS
    -   "mel01-vault"
        -   Melbourne Vault
        -   Provider: IBMCOS
    -   "mel01-cold"
        -   Melbourne Cold
        -   Provider: IBMCOS
    -   "mel01-flex"
        -   Melbourne Flex
        -   Provider: IBMCOS
    -   "tor01-standard"
        -   Toronto Standard
        -   Provider: IBMCOS
    -   "tor01-vault"
        -   Toronto Vault
        -   Provider: IBMCOS
    -   "tor01-cold"
        -   Toronto Cold
        -   Provider: IBMCOS
    -   "tor01-flex"
        -   Toronto Flex
        -   Provider: IBMCOS
    -   "cn-east-1"
        -   East China Region 1
        -   Provider: Qiniu
    -   "cn-east-2"
        -   East China Region 2
        -   Provider: Qiniu
    -   "cn-north-1"
        -   North China Region 1
        -   Provider: Qiniu
    -   "cn-south-1"
        -   South China Region 1
        -   Provider: Qiniu
    -   "us-north-1"
        -   North America Region 1
        -   Provider: Qiniu
    -   "ap-southeast-1"
        -   Southeast Asia Region 1
        -   Provider: Qiniu
    -   "ap-northeast-1"
        -   Northeast Asia Region 1
        -   Provider: Qiniu
    -   "us-east-1"
        -   US East (N. Virginia)
        -   Provider: Rabata
    -   "eu-west-1"
        -   EU (Ireland)
        -   Provider: Rabata
    -   "eu-west-2"
        -   EU (London)
        -   Provider: Rabata
    -   "global"
        -   Global CDN Region
        -   Provider: RackCorp
    -   "au"
        -   Australia (All locations)
        -   Provider: RackCorp
    -   "au-nsw"
        -   NSW (Australia) Region
        -   Provider: RackCorp
    -   "au-qld"
        -   QLD (Australia) Region
        -   Provider: RackCorp
    -   "au-vic"
        -   VIC (Australia) Region
        -   Provider: RackCorp
    -   "au-wa"
        -   Perth (Australia) Region
        -   Provider: RackCorp
    -   "ph"
        -   Manila (Philippines) Region
        -   Provider: RackCorp
    -   "th"
        -   Bangkok (Thailand) Region
        -   Provider: RackCorp
    -   "hk"
        -   HK (Hong Kong) Region
        -   Provider: RackCorp
    -   "mn"
        -   Ulaanbaatar (Mongolia) Region
        -   Provider: RackCorp
    -   "kg"
        -   Bishkek (Kyrgyzstan) Region
        -   Provider: RackCorp
    -   "id"
        -   Jakarta (Indonesia) Region
        -   Provider: RackCorp
    -   "jp"
        -   Tokyo (Japan) Region
        -   Provider: RackCorp
    -   "sg"
        -   SG (Singapore) Region
        -   Provider: RackCorp
    -   "de"
        -   Frankfurt (Germany) Region
        -   Provider: RackCorp
    -   "us"
        -   USA (AnyCast) Region
        -   Provider: RackCorp
    -   "us-east-1"
        -   New York (USA) Region
        -   Provider: RackCorp
    -   "us-west-1"
        -   Fremont (USA) Region
        -   Provider: RackCorp
    -   "nz"
        -   Auckland (New Zealand) Region
        -   Provider: RackCorp

--s3-acl

Canned ACL used when creating buckets and storing or copying objects.

This ACL is used for creating objects and if bucket_acl isn't set, for
creating buckets too.

For more info visit
https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl

Note that this ACL is applied when server-side copying objects as S3
doesn't copy the ACL from the source but rather writes a fresh one.

If the acl is an empty string then no X-Amz-Acl: header is added and the
default (private) will be used.

Properties:

-   Config: acl
-   Env Var: RCLONE_S3_ACL
-   Provider:
    AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,ChinaMobile,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IBMCOS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,TencentCOS,US3,Wasabi,Zata,Other
-   Type: string
-   Required: false
-   Examples:
    -   "private"
        -   Owner gets FULL_CONTROL.
        -   No one else has access rights (default).
        -   Provider:
            AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,ChinaMobile,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,US3,Wasabi,Zata,Other
    -   "public-read"
        -   Owner gets FULL_CONTROL.
        -   The AllUsers group gets READ access.
        -   Provider:
            AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,ChinaMobile,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,TencentCOS,US3,Wasabi,Zata,Other
    -   "public-read-write"
        -   Owner gets FULL_CONTROL.
        -   The AllUsers group gets READ and WRITE access.
        -   Granting this on a bucket is generally not recommended.
        -   Provider:
            AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,ChinaMobile,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,TencentCOS,Wasabi,Zata,Other
    -   "authenticated-read"
        -   Owner gets FULL_CONTROL.
        -   The AuthenticatedUsers group gets READ access.
        -   Provider:
            AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,ChinaMobile,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,TencentCOS,Wasabi,Zata,Other
    -   "bucket-owner-read"
        -   Object owner gets FULL_CONTROL.
        -   Bucket owner gets READ access.
        -   If you specify this canned ACL when creating a bucket,
            Amazon S3 ignores it.
        -   Provider:
            AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,TencentCOS,Wasabi,Zata,Other
    -   "bucket-owner-full-control"
        -   Both the object owner and the bucket owner get FULL_CONTROL
            over the object.
        -   If you specify this canned ACL when creating a bucket,
            Amazon S3 ignores it.
        -   Provider:
            AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,TencentCOS,Wasabi,Zata,Other
    -   "private"
        -   Owner gets FULL_CONTROL.
        -   No one else has access rights (default).
        -   This acl is available on IBM Cloud (Infra), IBM Cloud
            (Storage), On-Premise COS.
        -   Provider: IBMCOS
    -   "public-read"
        -   Owner gets FULL_CONTROL.
        -   The AllUsers group gets READ access.
        -   This acl is available on IBM Cloud (Infra), IBM Cloud
            (Storage), On-Premise IBM COS.
        -   Provider: IBMCOS
    -   "public-read-write"
        -   Owner gets FULL_CONTROL.
        -   The AllUsers group gets READ and WRITE access.
        -   This acl is available on IBM Cloud (Infra), On-Premise IBM
            COS.
        -   Provider: IBMCOS
    -   "authenticated-read"
        -   Owner gets FULL_CONTROL.
        -   The AuthenticatedUsers group gets READ access.
        -   Not supported on Buckets.
        -   This acl is available on IBM Cloud (Infra) and On-Premise
            IBM COS.
        -   Provider: IBMCOS
    -   "default"
        -   Owner gets Full_CONTROL.
        -   No one else has access rights (default).
        -   Provider: TencentCOS

--s3-server-side-encryption

The server-side encryption algorithm used when storing this object in
S3.

Properties:

-   Config: server_side_encryption
-   Env Var: RCLONE_S3_SERVER_SIDE_ENCRYPTION
-   Provider: AWS,Ceph,ChinaMobile,Minio
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None
        -   Provider: AWS,Ceph,ChinaMobile,Minio
    -   "AES256"
        -   AES256
        -   Provider: AWS,Ceph,ChinaMobile,Minio
    -   "aws:kms"
        -   aws:kms
        -   Provider: AWS,Ceph,Minio

--s3-sse-kms-key-id

If using KMS ID you must provide the ARN of Key.

Properties:

-   Config: sse_kms_key_id
-   Env Var: RCLONE_S3_SSE_KMS_KEY_ID
-   Provider: AWS,Ceph,Minio
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None
    -   "arn:aws:kms:us-east-1:*"
        -   arn:aws:kms:*

--s3-storage-class

The storage class to use when storing new objects in S3.

Properties:

-   Config: storage_class
-   Env Var: RCLONE_S3_STORAGE_CLASS
-   Provider:
    AWS,Alibaba,ArvanCloud,ChinaMobile,Liara,Magalu,OVHcloud,Qiniu,Scaleway,TencentCOS,US3
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   Default
        -   Provider: AWS,Alibaba,ChinaMobile,OVHcloud,TencentCOS,US3
    -   "STANDARD"
        -   Standard storage class
        -   Provider:
            AWS,Alibaba,ArvanCloud,ChinaMobile,Liara,Magalu,OVHcloud,Qiniu,TencentCOS,US3
    -   "REDUCED_REDUNDANCY"
        -   Reduced redundancy storage class
        -   Provider: AWS
    -   "STANDARD_IA"
        -   Standard Infrequent Access storage class
        -   Provider: AWS,OVHcloud
    -   "ONEZONE_IA"
        -   One Zone Infrequent Access storage class
        -   Provider: AWS
    -   "GLACIER"
        -   Glacier Flexible Retrieval storage class
        -   Provider: AWS
    -   "DEEP_ARCHIVE"
        -   Glacier Deep Archive storage class
        -   Provider: AWS
    -   "INTELLIGENT_TIERING"
        -   Intelligent-Tiering storage class
        -   Provider: AWS
    -   "GLACIER_IR"
        -   Glacier Instant Retrieval storage class
        -   Provider: AWS,Magalu
    -   "GLACIER"
        -   Archive storage mode
        -   Provider: Alibaba,ChinaMobile,Qiniu
    -   "STANDARD_IA"
        -   Infrequent access storage mode
        -   Provider: Alibaba,ChinaMobile,TencentCOS,US3
    -   "EXPRESS_ONEZONE"
        -   High Performance storage class
        -   Provider: OVHcloud
    -   "ONEZONE_IA"
        -   Standard Infrequent Access storage class
        -   Provider: OVHcloud
    -   "GLACIER"
        -   Active Archive storage class
        -   Provider: OVHcloud
    -   "GLACIER_IR"
        -   Active Archive storage class
        -   Provider: OVHcloud
    -   "DEEP_ARCHIVE"
        -   Cold Archive storage class
        -   Provider: OVHcloud
    -   "INTELLIGENT_TIERING"
        -   Standard storage class
        -   Provider: OVHcloud
    -   "LINE"
        -   Infrequent access storage mode
        -   Provider: Qiniu
    -   "DEEP_ARCHIVE"
        -   Deep archive storage mode
        -   Provider: Qiniu
    -   ""
        -   Default.
        -   Provider: Scaleway
    -   "STANDARD"
        -   The Standard class for any upload.
        -   Suitable for on-demand content like streaming or CDN.
        -   Available in all regions.
        -   Provider: Scaleway
    -   "GLACIER"
        -   Archived storage.
        -   Prices are lower, but it needs to be restored first to be
            accessed.
        -   Available in the FR-PAR region only.
        -   Provider: Scaleway
    -   "ONEZONE_IA"
        -   One Zone - Infrequent Access.
        -   A good choice for storing secondary backup copies or easily
            re-creatable data.
        -   Available in all regions.
        -   Provider: Scaleway
    -   "ARCHIVE"
        -   Archive storage mode
        -   Provider: TencentCOS,US3

--s3-ibm-api-key

IBM API Key to be used to obtain IAM token

Properties:

-   Config: ibm_api_key
-   Env Var: RCLONE_S3_IBM_API_KEY
-   Provider: IBMCOS
-   Type: string
-   Required: false

--s3-ibm-resource-instance-id

IBM service instance id

Properties:

-   Config: ibm_resource_instance_id
-   Env Var: RCLONE_S3_IBM_RESOURCE_INSTANCE_ID
-   Provider: IBMCOS
-   Type: string
-   Required: false

--s3-bucket-object-lock-enabled

Enable Object Lock when creating new buckets.

Properties:

-   Config: bucket_object_lock_enabled
-   Env Var: RCLONE_S3_BUCKET_OBJECT_LOCK_ENABLED
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to s3 (Amazon S3 Compliant
Storage Providers including AWS, Alibaba, ArvanCloud, BizflyCloud, Ceph,
ChinaMobile, Cloudflare, Cubbit, DigitalOcean, Dreamhost, Exaba, Fastly,
FileLu, FlashBlade, GCS, HCP, Hetzner, HuaweiOBS, IBMCOS, IDrive,
ImpossibleCloud, Intercolo, IONOS, Leviia, Liara, Linode, LyveCloud,
Magalu, Mega, Minio, Netease, Outscale, OVHcloud, Petabox, Qiniu,
Rabata, RackCorp, Rclone, Scaleway, SeaweedFS, Selectel, Servercore,
SpectraLogic, Storj, Synology, TencentCOS, US3, Wasabi, Zadara, Zata,
Other).

--s3-bucket-acl

Canned ACL used when creating buckets.

For more info visit
https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl

Note that this ACL is applied when only when creating buckets. If it
isn't set then "acl" is used instead.

If the "acl" and "bucket_acl" are empty strings then no X-Amz-Acl:
header is added and the default (private) will be used.

Properties:

-   Config: bucket_acl
-   Env Var: RCLONE_S3_BUCKET_ACL
-   Provider:
    AWS,Alibaba,ArvanCloud,BizflyCloud,Ceph,ChinaMobile,Cubbit,DigitalOcean,Dreamhost,Exaba,FileLu,GCS,HCP,Hetzner,HuaweiOBS,IBMCOS,IDrive,ImpossibleCloud,Intercolo,IONOS,Leviia,Liara,Linode,LyveCloud,Magalu,Mega,Minio,Netease,Outscale,OVHcloud,Petabox,Qiniu,RackCorp,Scaleway,SeaweedFS,Servercore,TencentCOS,US3,Wasabi,Zata,Other
-   Type: string
-   Required: false
-   Examples:
    -   "private"
        -   Owner gets FULL_CONTROL.
        -   No one else has access rights (default).
    -   "public-read"
        -   Owner gets FULL_CONTROL.
        -   The AllUsers group gets READ access.
    -   "public-read-write"
        -   Owner gets FULL_CONTROL.
        -   The AllUsers group gets READ and WRITE access.
        -   Granting this on a bucket is generally not recommended.
    -   "authenticated-read"
        -   Owner gets FULL_CONTROL.
        -   The AuthenticatedUsers group gets READ access.

--s3-requester-pays

Enables requester pays option when interacting with S3 bucket.

Properties:

-   Config: requester_pays
-   Env Var: RCLONE_S3_REQUESTER_PAYS
-   Provider: AWS
-   Type: bool
-   Default: false

--s3-sse-customer-algorithm

If using SSE-C, the server-side encryption algorithm used when storing
this object in S3.

Properties:

-   Config: sse_customer_algorithm
-   Env Var: RCLONE_S3_SSE_CUSTOMER_ALGORITHM
-   Provider: AWS,Ceph,ChinaMobile,Minio
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None
    -   "AES256"
        -   AES256

--s3-sse-customer-key

To use SSE-C you may provide the secret encryption key used to
encrypt/decrypt your data.

Alternatively you can provide --sse-customer-key-base64.

Properties:

-   Config: sse_customer_key
-   Env Var: RCLONE_S3_SSE_CUSTOMER_KEY
-   Provider: AWS,Ceph,ChinaMobile,Minio
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--s3-sse-customer-key-base64

If using SSE-C you must provide the secret encryption key encoded in
base64 format to encrypt/decrypt your data.

Alternatively you can provide --sse-customer-key.

Properties:

-   Config: sse_customer_key_base64
-   Env Var: RCLONE_S3_SSE_CUSTOMER_KEY_BASE64
-   Provider: AWS,Ceph,ChinaMobile,Minio
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--s3-sse-customer-key-md5

If using SSE-C you may provide the secret encryption key MD5 checksum
(optional).

If you leave it blank, this is calculated automatically from the
sse_customer_key provided.

Properties:

-   Config: sse_customer_key_md5
-   Env Var: RCLONE_S3_SSE_CUSTOMER_KEY_MD5
-   Provider: AWS,Ceph,ChinaMobile,Minio
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--s3-upload-cutoff

Cutoff for switching to chunked upload.

Any files larger than this will be uploaded in chunks of chunk_size. The
minimum is 0 and the maximum is 5 GiB.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_S3_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 200Mi

--s3-chunk-size

Chunk size to use for uploading.

When uploading files larger than upload_cutoff or files with unknown
size (e.g. from "rclone rcat" or uploaded with "rclone mount" or google
photos or google docs) they will be uploaded as multipart uploads using
this chunk size.

Note that "--s3-upload-concurrency" chunks of this size are buffered in
memory per transfer.

If you are transferring large files over high-speed links and you have
enough memory, then increasing this will speed up the transfers.

Rclone will automatically increase the chunk size when uploading a large
file of known size to stay below the 10,000 chunks limit.

Files of unknown size are uploaded with the configured chunk_size. Since
the default chunk size is 5 MiB and there can be at most 10,000 chunks,
this means that by default the maximum size of a file you can stream
upload is 48 GiB. If you wish to stream upload larger files then you
will need to increase chunk_size.

Increasing the chunk size decreases the accuracy of the progress
statistics displayed with "-P" flag. Rclone treats chunk as sent when
it's buffered by the AWS SDK, when in fact it may still be uploading. A
bigger chunk size means a bigger AWS SDK buffer and progress reporting
more deviating from the truth.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_S3_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 5Mi

--s3-max-upload-parts

Maximum number of parts in a multipart upload.

This option defines the maximum number of multipart chunks to use when
doing a multipart upload.

This can be useful if a service does not support the AWS S3
specification of 10,000 chunks.

Rclone will automatically increase the chunk size when uploading a large
file of a known size to stay below this number of chunks limit.

Properties:

-   Config: max_upload_parts
-   Env Var: RCLONE_S3_MAX_UPLOAD_PARTS
-   Type: int
-   Default: 10000

--s3-copy-cutoff

Cutoff for switching to multipart copy.

Any files larger than this that need to be server-side copied will be
copied in chunks of this size.

The minimum is 0 and the maximum is 5 GiB.

Properties:

-   Config: copy_cutoff
-   Env Var: RCLONE_S3_COPY_CUTOFF
-   Type: SizeSuffix
-   Default: 4.656Gi

--s3-disable-checksum

Don't store MD5 checksum with object metadata.

Normally rclone will calculate the MD5 checksum of the input before
uploading it so it can add it to metadata on the object. This is great
for data integrity checking but can cause long delays for large files to
start uploading.

Properties:

-   Config: disable_checksum
-   Env Var: RCLONE_S3_DISABLE_CHECKSUM
-   Type: bool
-   Default: false

--s3-shared-credentials-file

Path to the shared credentials file.

If env_auth = true then rclone can use a shared credentials file.

If this variable is empty rclone will look for the
"AWS_SHARED_CREDENTIALS_FILE" env variable. If the env value is empty it
will default to the current user's home directory.

    Linux/OSX: "$HOME/.aws/credentials"
    Windows:   "%USERPROFILE%\.aws\credentials"

Properties:

-   Config: shared_credentials_file
-   Env Var: RCLONE_S3_SHARED_CREDENTIALS_FILE
-   Type: string
-   Required: false

--s3-profile

Profile to use in the shared credentials file.

If env_auth = true then rclone can use a shared credentials file. This
variable controls which profile is used in that file.

If empty it will default to the environment variable "AWS_PROFILE" or
"default" if that environment variable is also not set.

Properties:

-   Config: profile
-   Env Var: RCLONE_S3_PROFILE
-   Type: string
-   Required: false

--s3-session-token

An AWS session token.

Properties:

-   Config: session_token
-   Env Var: RCLONE_S3_SESSION_TOKEN
-   Type: string
-   Required: false

--s3-role-arn

ARN of the IAM role to assume.

Leave blank if not using assume role.

Properties:

-   Config: role_arn
-   Env Var: RCLONE_S3_ROLE_ARN
-   Type: string
-   Required: false

--s3-role-session-name

Session name for assumed role.

If empty, a session name will be generated automatically.

Properties:

-   Config: role_session_name
-   Env Var: RCLONE_S3_ROLE_SESSION_NAME
-   Type: string
-   Required: false

--s3-role-session-duration

Session duration for assumed role.

If empty, the default session duration will be used.

Properties:

-   Config: role_session_duration
-   Env Var: RCLONE_S3_ROLE_SESSION_DURATION
-   Type: string
-   Required: false

--s3-role-external-id

External ID for assumed role.

Leave blank if not using an external ID.

Properties:

-   Config: role_external_id
-   Env Var: RCLONE_S3_ROLE_EXTERNAL_ID
-   Type: string
-   Required: false

--s3-upload-concurrency

Concurrency for multipart uploads and copies.

This is the number of chunks of the same file that are uploaded
concurrently for multipart uploads and copies.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_S3_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 4

--s3-force-path-style

If true use path style access if false use virtual hosted style.

If this is true (the default) then rclone will use path style access, if
false then rclone will use virtual path style. See the AWS S3 docs for
more info.

Some providers (e.g. AWS, Aliyun OSS, Netease COS, or Tencent COS)
require this set to false - rclone will do this automatically based on
the provider setting.

Note that if your bucket isn't a valid DNS name, i.e. has '.' or '_' in,
you'll need to set this to true.

Properties:

-   Config: force_path_style
-   Env Var: RCLONE_S3_FORCE_PATH_STYLE
-   Type: bool
-   Default: true

--s3-v2-auth

If true use v2 authentication.

If this is false (the default) then rclone will use v4 authentication.
If it is set then rclone will use v2 authentication.

Use this only if v4 signatures don't work, e.g. pre Jewel/v10 CEPH.

Properties:

-   Config: v2_auth
-   Env Var: RCLONE_S3_V2_AUTH
-   Type: bool
-   Default: false

--s3-use-dual-stack

If true use AWS S3 dual-stack endpoint (IPv6 support).

See AWS Docs on Dualstack Endpoints

Properties:

-   Config: use_dual_stack
-   Env Var: RCLONE_S3_USE_DUAL_STACK
-   Type: bool
-   Default: false

--s3-use-accelerate-endpoint

If true use the AWS S3 accelerated endpoint.

See: AWS S3 Transfer acceleration

Properties:

-   Config: use_accelerate_endpoint
-   Env Var: RCLONE_S3_USE_ACCELERATE_ENDPOINT
-   Provider: AWS
-   Type: bool
-   Default: false

--s3-use-arn-region

If true, enables arn region support for the service.

Properties:

-   Config: use_arn_region
-   Env Var: RCLONE_S3_USE_ARN_REGION
-   Type: bool
-   Default: false

--s3-leave-parts-on-error

If true avoid calling abort upload on a failure, leaving all
successfully uploaded parts on S3 for manual recovery.

It should be set to true for resuming uploads across different sessions.

WARNING: Storing parts of an incomplete multipart upload counts towards
space usage on S3 and will add additional costs if not cleaned up.

Properties:

-   Config: leave_parts_on_error
-   Env Var: RCLONE_S3_LEAVE_PARTS_ON_ERROR
-   Provider: AWS
-   Type: bool
-   Default: false

--s3-list-chunk

Size of listing chunk (response list for each ListObject S3 request).

This option is also known as "MaxKeys", "max-items", or "page-size" from
the AWS S3 specification. Most services truncate the response list to
1000 objects even if requested more than that. In AWS S3 this is a
global maximum and cannot be changed, see AWS S3. In Ceph, this can be
increased with the "rgw list buckets max chunk" option.

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_S3_LIST_CHUNK
-   Type: int
-   Default: 1000

--s3-list-version

Version of ListObjects to use: 1,2 or 0 for auto.

When S3 originally launched it only provided the ListObjects call to
enumerate objects in a bucket.

However in May 2016 the ListObjectsV2 call was introduced. This is much
higher performance and should be used if at all possible.

If set to the default, 0, rclone will guess according to the provider
set which list objects method to call. If it guesses wrong, then it may
be set manually here.

Properties:

-   Config: list_version
-   Env Var: RCLONE_S3_LIST_VERSION
-   Type: int
-   Default: 0

--s3-list-url-encode

Whether to url encode listings: true/false/unset

Some providers support URL encoding listings and where this is available
this is more reliable when using control characters in file names. If
this is set to unset (the default) then rclone will choose according to
the provider setting what to apply, but you can override rclone's choice
here.

Properties:

-   Config: list_url_encode
-   Env Var: RCLONE_S3_LIST_URL_ENCODE
-   Type: Tristate
-   Default: unset

--s3-no-check-bucket

If set, don't attempt to check the bucket exists or create it.

This can be useful when trying to minimise the number of transactions
rclone does if you know the bucket exists already.

It can also be needed if the user you are using does not have bucket
creation permissions. Before v1.52.0 this would have passed silently due
to a bug.

Properties:

-   Config: no_check_bucket
-   Env Var: RCLONE_S3_NO_CHECK_BUCKET
-   Type: bool
-   Default: false

--s3-no-head

If set, don't HEAD uploaded objects to check integrity.

This can be useful when trying to minimise the number of transactions
rclone does.

Setting it means that if rclone receives a 200 OK message after
uploading an object with PUT then it will assume that it got uploaded
properly.

In particular it will assume:

-   the metadata, including modtime, storage class and content type was
    as uploaded
-   the size was as uploaded

It reads the following items from the response for a single part PUT:

-   the MD5SUM
-   The uploaded date

For multipart uploads these items aren't read.

If an source object of unknown length is uploaded then rclone will do a
HEAD request.

Setting this flag increases the chance for undetected upload failures,
in particular an incorrect size, so it isn't recommended for normal
operation. In practice the chance of an undetected upload failure is
very small even with this flag.

Properties:

-   Config: no_head
-   Env Var: RCLONE_S3_NO_HEAD
-   Type: bool
-   Default: false

--s3-no-head-object

If set, do not do HEAD before GET when getting objects.

Properties:

-   Config: no_head_object
-   Env Var: RCLONE_S3_NO_HEAD_OBJECT
-   Type: bool
-   Default: false

--s3-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_S3_ENCODING
-   Type: Encoding
-   Default: Slash,InvalidUtf8,Dot

--s3-memory-pool-flush-time

How often internal memory buffer pools will be flushed. (no longer used)

Properties:

-   Config: memory_pool_flush_time
-   Env Var: RCLONE_S3_MEMORY_POOL_FLUSH_TIME
-   Type: Duration
-   Default: 1m0s

--s3-memory-pool-use-mmap

Whether to use mmap buffers in internal memory pool. (no longer used)

Properties:

-   Config: memory_pool_use_mmap
-   Env Var: RCLONE_S3_MEMORY_POOL_USE_MMAP
-   Type: bool
-   Default: false

--s3-disable-http2

Disable usage of http2 for S3 backends.

There is currently an unsolved issue with the s3 (specifically minio)
backend and HTTP/2. HTTP/2 is enabled by default for the s3 backend but
can be disabled here. When the issue is solved this flag will be
removed.

See: https://github.com/rclone/rclone/issues/4673,
https://github.com/rclone/rclone/issues/3631

Properties:

-   Config: disable_http2
-   Env Var: RCLONE_S3_DISABLE_HTTP2
-   Type: bool
-   Default: false

--s3-download-url

Custom endpoint for downloads. This is usually set to a CloudFront CDN
URL as AWS S3 offers cheaper egress for data downloaded through the
CloudFront network.

Properties:

-   Config: download_url
-   Env Var: RCLONE_S3_DOWNLOAD_URL
-   Type: string
-   Required: false

--s3-directory-markers

Upload an empty object with a trailing slash when a new directory is
created

Empty folders are unsupported for bucket based remotes, this option
creates an empty object ending with "/", to persist the folder.

Properties:

-   Config: directory_markers
-   Env Var: RCLONE_S3_DIRECTORY_MARKERS
-   Type: bool
-   Default: false

--s3-use-multipart-etag

Whether to use ETag in multipart uploads for verification

This should be true, false or left unset to use the default for the
provider.

Properties:

-   Config: use_multipart_etag
-   Env Var: RCLONE_S3_USE_MULTIPART_ETAG
-   Type: Tristate
-   Default: unset

--s3-use-unsigned-payload

Whether to use an unsigned payload in PutObject

Rclone has to avoid the AWS SDK seeking the body when calling PutObject.
The AWS provider can add checksums in the trailer to avoid seeking but
other providers can't.

This should be true, false or left unset to use the default for the
provider.

Properties:

-   Config: use_unsigned_payload
-   Env Var: RCLONE_S3_USE_UNSIGNED_PAYLOAD
-   Type: Tristate
-   Default: unset

--s3-use-presigned-request

Whether to use a presigned request or PutObject for single part uploads

If this is false rclone will use PutObject from the AWS SDK to upload an
object.

Versions of rclone < 1.59 use presigned requests to upload a single part
object and setting this flag to true will re-enable that functionality.
This shouldn't be necessary except in exceptional circumstances or for
testing.

Properties:

-   Config: use_presigned_request
-   Env Var: RCLONE_S3_USE_PRESIGNED_REQUEST
-   Type: bool
-   Default: false

--s3-use-data-integrity-protections

If true use AWS S3 data integrity protections.

See AWS Docs on Data Integrity Protections

Properties:

-   Config: use_data_integrity_protections
-   Env Var: RCLONE_S3_USE_DATA_INTEGRITY_PROTECTIONS
-   Type: Tristate
-   Default: unset

--s3-versions

Include old versions in directory listings.

Properties:

-   Config: versions
-   Env Var: RCLONE_S3_VERSIONS
-   Type: bool
-   Default: false

--s3-version-at

Show file versions as they were at the specified time.

The parameter should be a date, "2006-01-02", datetime "2006-01-02
15:04:05" or a duration for that long ago, eg "100d" or "1h".

Note that when using this no file write operations are permitted, so you
can't upload files or delete them.

See the time option docs for valid formats.

Properties:

-   Config: version_at
-   Env Var: RCLONE_S3_VERSION_AT
-   Type: Time
-   Default: off

--s3-version-deleted

Show deleted file markers when using versions.

This shows deleted file markers in the listing when using versions.
These will appear as 0 size files. The only operation which can be
performed on them is deletion.

Deleting a delete marker will reveal the previous version.

Deleted files will always show with a timestamp.

Properties:

-   Config: version_deleted
-   Env Var: RCLONE_S3_VERSION_DELETED
-   Type: bool
-   Default: false

--s3-decompress

If set this will decompress gzip encoded objects.

It is possible to upload objects to S3 with "Content-Encoding: gzip"
set. Normally rclone will download these files as compressed objects.

If this flag is set then rclone will decompress these files with
"Content-Encoding: gzip" as they are received. This means that rclone
can't check the size and hash but the file contents will be
decompressed.

Properties:

-   Config: decompress
-   Env Var: RCLONE_S3_DECOMPRESS
-   Type: bool
-   Default: false

--s3-might-gzip

Set this if the backend might gzip objects.

Normally providers will not alter objects when they are downloaded. If
an object was not uploaded with Content-Encoding: gzip then it won't be
set on download.

However some providers may gzip objects even if they weren't uploaded
with Content-Encoding: gzip (eg Cloudflare).

A symptom of this would be receiving errors like

    ERROR corrupted on transfer: sizes differ NNN vs MMM

If you set this flag and rclone downloads an object with
Content-Encoding: gzip set and chunked transfer encoding, then rclone
will decompress the object on the fly.

If this is set to unset (the default) then rclone will choose according
to the provider setting what to apply, but you can override rclone's
choice here.

Properties:

-   Config: might_gzip
-   Env Var: RCLONE_S3_MIGHT_GZIP
-   Type: Tristate
-   Default: unset

--s3-use-accept-encoding-gzip

Whether to send Accept-Encoding: gzip header.

By default, rclone will append Accept-Encoding: gzip to the request to
download compressed objects whenever possible.

However some providers such as Google Cloud Storage may alter the HTTP
headers, breaking the signature of the request.

A symptom of this would be receiving errors like

    SignatureDoesNotMatch: The request signature we calculated does not match the signature you provided.

In this case, you might want to try disabling this option.

Properties:

-   Config: use_accept_encoding_gzip
-   Env Var: RCLONE_S3_USE_ACCEPT_ENCODING_GZIP
-   Type: Tristate
-   Default: unset

--s3-no-system-metadata

Suppress setting and reading of system metadata

Properties:

-   Config: no_system_metadata
-   Env Var: RCLONE_S3_NO_SYSTEM_METADATA
-   Type: bool
-   Default: false

--s3-sts-endpoint

Endpoint for STS (deprecated).

Leave blank if using AWS to use the default endpoint for the region.

Properties:

-   Config: sts_endpoint
-   Env Var: RCLONE_S3_STS_ENDPOINT
-   Provider: AWS
-   Type: string
-   Required: false

--s3-use-already-exists

Set if rclone should report BucketAlreadyExists errors on bucket
creation.

At some point during the evolution of the s3 protocol, AWS started
returning an AlreadyOwnedByYou error when attempting to create a bucket
that the user already owned, rather than a BucketAlreadyExists error.

Unfortunately exactly what has been implemented by s3 clones is a little
inconsistent, some return AlreadyOwnedByYou, some return
BucketAlreadyExists and some return no error at all.

This is important to rclone because it ensures the bucket exists by
creating it on quite a lot of operations (unless --s3-no-check-bucket is
used).

If rclone knows the provider can return AlreadyOwnedByYou or returns no
error then it can report BucketAlreadyExists errors when the user
attempts to create a bucket not owned by them. Otherwise rclone ignores
the BucketAlreadyExists error which can lead to confusion.

This should be automatically set correctly for all providers rclone
knows about - please make a bug report if not.

Properties:

-   Config: use_already_exists
-   Env Var: RCLONE_S3_USE_ALREADY_EXISTS
-   Type: Tristate
-   Default: unset

--s3-use-multipart-uploads

Set if rclone should use multipart uploads.

You can change this if you want to disable the use of multipart uploads.
This shouldn't be necessary in normal operation.

This should be automatically set correctly for all providers rclone
knows about - please make a bug report if not.

Properties:

-   Config: use_multipart_uploads
-   Env Var: RCLONE_S3_USE_MULTIPART_UPLOADS
-   Type: Tristate
-   Default: unset

--s3-list-versions-oldest-first

Set if the backend returns object versions oldest first.

The S3 standard returns object versions newest first. Some backends
(e.g. Hitachi HCP) return them oldest first instead.

Set this quirk if --s3-version-at or --s3-versions produce incorrect
results with your backend.

This should be automatically set correctly for all providers rclone
knows about - please make a bug report if not.

Properties:

-   Config: list_versions_oldest_first
-   Env Var: RCLONE_S3_LIST_VERSIONS_OLDEST_FIRST
-   Type: Tristate
-   Default: unset

--s3-use-x-id

Set if rclone should add x-id URL parameters.

You can change this if you want to disable the AWS SDK from adding x-id
URL parameters.

This shouldn't be necessary in normal operation.

This should be automatically set correctly for all providers rclone
knows about - please make a bug report if not.

Properties:

-   Config: use_x_id
-   Env Var: RCLONE_S3_USE_X_ID
-   Type: Tristate
-   Default: unset

--s3-sign-accept-encoding

Set if rclone should include Accept-Encoding as part of the signature.

You can change this if you want to stop rclone including Accept-Encoding
as part of the signature.

This shouldn't be necessary in normal operation.

This should be automatically set correctly for all providers rclone
knows about - please make a bug report if not.

Properties:

-   Config: sign_accept_encoding
-   Env Var: RCLONE_S3_SIGN_ACCEPT_ENCODING
-   Type: Tristate
-   Default: unset

--s3-directory-bucket

Set to use AWS Directory Buckets

If you are using an AWS Directory Bucket then set this flag.

This will ensure no Content-Md5 headers are sent and ensure ETag headers
are not interpreted as MD5 sums. X-Amz-Meta-Md5chksum will be set on all
objects whether single or multipart uploaded.

This also sets no_check_bucket = true.

Note that Directory Buckets do not support:

-   Versioning
-   Content-Encoding: gzip

Rclone limitations with Directory Buckets:

-   rclone does not support creating Directory Buckets with rclone mkdir
-   ... or removing them with rclone rmdir yet
-   Directory Buckets do not appear when doing rclone lsf at the top
    level.
-   Rclone can't remove auto created directories yet. In theory this
    should work with directory_markers = true but it doesn't.
-   Directories don't seem to appear in recursive (ListR) listings.

Properties:

-   Config: directory_bucket
-   Env Var: RCLONE_S3_DIRECTORY_BUCKET
-   Provider: AWS
-   Type: bool
-   Default: false

--s3-sdk-log-mode

Set to debug the SDK

This can be set to a comma separated list of the following functions:

-   Signing
-   Retries
-   Request
-   RequestWithBody
-   Response
-   ResponseWithBody
-   DeprecatedUsage
-   RequestEventMessage
-   ResponseEventMessage

Use Off to disable and All to set all log levels. You will need to use
-vv to see the debug level logs.

Properties:

-   Config: sdk_log_mode
-   Env Var: RCLONE_S3_SDK_LOG_MODE
-   Type: Bits
-   Default: Off

--s3-ibm-iam-endpoint

IBM IAM Endpoint to use for authentication.

Leave blank to use the default public endpoint.

Properties:

-   Config: ibm_iam_endpoint
-   Env Var: RCLONE_S3_IBM_IAM_ENDPOINT
-   Provider: IBMCOS
-   Type: string
-   Required: false

--s3-object-lock-mode

Object Lock mode to apply when uploading or copying objects.

Set this to apply Object Lock retention mode to objects. If not set, no
Object Lock mode is applied (even with --metadata).

Note: To enable Object Lock retention, you must set BOTH
object_lock_mode AND object_lock_retain_until_date. Setting only one has
no effect.

-   GOVERNANCE: Set Object Lock mode to GOVERNANCE
-   COMPLIANCE: Set Object Lock mode to COMPLIANCE
-   copy: Copy the mode from the source object (requires --metadata)

See:
https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock.html

Properties:

-   Config: object_lock_mode
-   Env Var: RCLONE_S3_OBJECT_LOCK_MODE
-   Type: string
-   Required: false
-   Examples:
    -   "GOVERNANCE"
        -   Set Object Lock mode to GOVERNANCE
    -   "COMPLIANCE"
        -   Set Object Lock mode to COMPLIANCE
    -   "copy"
        -   Copy from source object (requires --metadata)

--s3-object-lock-retain-until-date

Object Lock retention until date to apply when uploading or copying
objects.

Set this to apply Object Lock retention date to objects. If not set, no
retention date is applied (even with --metadata).

Note: To enable Object Lock retention, you must set BOTH
object_lock_mode AND object_lock_retain_until_date. Setting only one has
no effect.

Accepts: - RFC 3339 format: 2030-01-02T15:04:05Z - Duration from now:
365d, 1y, 6M (days, years, months) - copy: Copy the date from the source
object (requires --metadata)

See:
https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock.html

Properties:

-   Config: object_lock_retain_until_date
-   Env Var: RCLONE_S3_OBJECT_LOCK_RETAIN_UNTIL_DATE
-   Type: string
-   Required: false
-   Examples:
    -   "copy"
        -   Copy from source object (requires --metadata)
    -   "2030-01-01T00:00:00Z"
        -   Set specific date (RFC 3339 format)
    -   "365d"
        -   Set retention for 365 days from now
    -   "1y"
        -   Set retention for 1 year from now

--s3-object-lock-legal-hold-status

Object Lock legal hold status to apply when uploading or copying
objects.

Set this to apply Object Lock legal hold to objects. If not set, no
legal hold is applied (even with --metadata).

Note: Legal hold is independent of retention and can be set separately.

-   ON: Enable legal hold
-   OFF: Disable legal hold
-   copy: Copy the legal hold status from the source object (requires
    --metadata)

See:
https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock.html

Properties:

-   Config: object_lock_legal_hold_status
-   Env Var: RCLONE_S3_OBJECT_LOCK_LEGAL_HOLD_STATUS
-   Type: string
-   Required: false
-   Examples:
    -   "ON"
        -   Enable legal hold
    -   "OFF"
        -   Disable legal hold
    -   "copy"
        -   Copy from source object (requires --metadata)

--s3-bypass-governance-retention

Allow deleting or modifying objects locked with GOVERNANCE mode.

Properties:

-   Config: bypass_governance_retention
-   Env Var: RCLONE_S3_BYPASS_GOVERNANCE_RETENTION
-   Type: bool
-   Default: false

--s3-object-lock-set-after-upload

Set Object Lock via separate API calls after upload.

Use this for S3-compatible providers that don't support setting Object
Lock headers during PUT operations. When enabled, Object Lock is set via
separate PutObjectRetention and PutObjectLegalHold API calls after the
upload completes.

This adds extra API calls per object, so only enable if your provider
requires it.

Properties:

-   Config: object_lock_set_after_upload
-   Env Var: RCLONE_S3_OBJECT_LOCK_SET_AFTER_UPLOAD
-   Type: bool
-   Default: false

--s3-object-lock-supported

Whether the provider supports S3 Object Lock.

This should be true, false or left unset to use the default for the
provider.

Set to false for providers that don't fully support the S3 Object Lock
API (e.g. GCS which uses non-standard headers for bypass governance
retention and doesn't implement Legal Hold via the S3 API).

Properties:

-   Config: object_lock_supported
-   Env Var: RCLONE_S3_OBJECT_LOCK_SUPPORTED
-   Type: Tristate
-   Default: unset

--s3-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_S3_DESCRIPTION
-   Type: string
-   Required: false

Metadata

User metadata is stored as x-amz-meta- keys. S3 metadata keys are case
insensitive and are always returned in lower case.

Here are the possible system metadata items for the s3 backend.

  ----------------------------------------------------------------------------------------------------------------------------
  Name                            Help                  Type        Example                               Read Only
  ------------------------------- --------------------- ----------- ------------------------------------- --------------------
  btime                           Time of file birth    RFC 3339    2006-01-02T15:04:05.999999999Z07:00   Y
                                  (creation) read from                                                    
                                  Last-Modified header                                                    

  cache-control                   Cache-Control header  string      no-cache                              N

  content-disposition             Content-Disposition   string      inline                                N
                                  header                                                                  

  content-encoding                Content-Encoding      string      gzip                                  N
                                  header                                                                  

  content-language                Content-Language      string      en-US                                 N
                                  header                                                                  

  content-type                    Content-Type header   string      text/plain                            N

  mtime                           Time of last          RFC 3339    2006-01-02T15:04:05.999999999Z07:00   N
                                  modification, read                                                      
                                  from rclone metadata                                                    

  object-lock-legal-hold-status   Object Lock legal     string      OFF                                   N
                                  hold status: ON or                                                      
                                  OFF                                                                     

  object-lock-mode                Object Lock mode:     string      GOVERNANCE                            N
                                  GOVERNANCE or                                                           
                                  COMPLIANCE                                                              

  object-lock-retain-until-date   Object Lock retention RFC 3339    2030-01-02T15:04:05Z                  N
                                  until date                                                              

  tier                            Tier of the object    string      GLACIER                               Y
  ----------------------------------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Backend commands

Here are the commands specific to the s3 backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

restore

Restore objects from GLACIER or INTELLIGENT-TIERING archive tier.

    rclone backend restore remote: [options] [<arguments>+]

This command can be used to restore one or more objects from GLACIER to
normal storage or from INTELLIGENT-TIERING Archive Access / Deep Archive
Access tier to the Frequent Access tier.

Usage examples:

    rclone backend restore s3:bucket/path/to/ --include /object -o priority=PRIORITY -o lifetime=DAYS
    rclone backend restore s3:bucket/path/to/directory -o priority=PRIORITY -o lifetime=DAYS
    rclone backend restore s3:bucket -o priority=PRIORITY -o lifetime=DAYS
    rclone backend restore s3:bucket/path/to/directory -o priority=PRIORITY

This flag also obeys the filters. Test first with --interactive/-i or
--dry-run flags.

    rclone --interactive backend restore --include "*.txt" s3:bucket/path -o priority=Standard -o lifetime=1

All the objects shown will be marked for restore, then:

    rclone backend restore --include "*.txt" s3:bucket/path -o priority=Standard -o lifetime=1

It returns a list of status dictionaries with Remote and Status keys.
The Status will be OK if it was successful or an error message if not.

    [
        {
            "Status": "OK",
            "Remote": "test.txt"
        },
        {
            "Status": "OK",
            "Remote": "test/file4.txt"
        }
    ]

Options:

-   "description": The optional description for the job.
-   "lifetime": Lifetime of the active copy in days, ignored for
    INTELLIGENT-TIERING storage.
-   "priority": Priority of restore: Standard|Expedited|Bulk

restore-status

Show the status for objects being restored from GLACIER or
INTELLIGENT-TIERING.

    rclone backend restore-status remote: [options] [<arguments>+]

This command can be used to show the status for objects being restored
from GLACIER to normal storage or from INTELLIGENT-TIERING Archive
Access / Deep Archive Access tier to the Frequent Access tier.

Usage examples:

    rclone backend restore-status s3:bucket/path/to/object
    rclone backend restore-status s3:bucket/path/to/directory
    rclone backend restore-status -o all s3:bucket/path/to/directory

This command does not obey the filters.

It returns a list of status dictionaries:

    [
        {
            "Remote": "file.txt",
            "VersionID": null,
            "RestoreStatus": {
                "IsRestoreInProgress": true,
                "RestoreExpiryDate": "2023-09-06T12:29:19+01:00"
            },
            "StorageClass": "GLACIER"
        },
        {
            "Remote": "test.pdf",
            "VersionID": null,
            "RestoreStatus": {
                "IsRestoreInProgress": false,
                "RestoreExpiryDate": "2023-09-06T12:29:19+01:00"
            },
            "StorageClass": "DEEP_ARCHIVE"
        },
        {
            "Remote": "test.gz",
            "VersionID": null,
            "RestoreStatus": {
                "IsRestoreInProgress": true,
                "RestoreExpiryDate": "null"
            },
            "StorageClass": "INTELLIGENT_TIERING"
        }
    ]

Options:

-   "all": If set then show all objects, not just ones with restore
    status.

list-multipart-uploads

List the unfinished multipart uploads.

    rclone backend list-multipart-uploads remote: [options] [<arguments>+]

This command lists the unfinished multipart uploads in JSON format.

Usage examples:

    rclone backend list-multipart s3:bucket/path/to/object

It returns a dictionary of buckets with values as lists of unfinished
multipart uploads.

You can call it with no bucket in which case it lists all bucket, with a
bucket or with a bucket and path.

    {
        "rclone": [
            {
                "Initiated": "2020-06-26T14:20:36Z",
                "Initiator": {
                    "DisplayName": "XXX",
                    "ID": "arn:aws:iam::XXX:user/XXX"
                },
                "Key": "KEY",
                "Owner": {
                    "DisplayName": null,
                    "ID": "XXX"
                },
                "StorageClass": "STANDARD",
                "UploadId": "XXX"
            }
        ],
        "rclone-1000files": [],
        "rclone-dst": []
    }

cleanup

Remove unfinished multipart uploads.

    rclone backend cleanup remote: [options] [<arguments>+]

This command removes unfinished multipart uploads of age greater than
max-age which defaults to 24 hours.

Note that you can use --interactive/-i or --dry-run with this command to
see what it would do.

Usage examples:

    rclone backend cleanup s3:bucket/path/to/object
    rclone backend cleanup -o max-age=7w s3:bucket/path/to/object

Durations are parsed as per the rest of rclone, 2h, 7d, 7w etc.

Options:

-   "max-age": Max age of upload to delete.

cleanup-hidden

Remove old versions of files.

    rclone backend cleanup-hidden remote: [options] [<arguments>+]

This command removes any old hidden versions of files on a versions
enabled bucket.

Note that you can use --interactive/-i or --dry-run with this command to
see what it would do.

Usage example:

    rclone backend cleanup-hidden s3:bucket/path/to/dir

versioning

Set/get versioning support for a bucket.

    rclone backend versioning remote: [options] [<arguments>+]

This command sets versioning support if a parameter is passed and then
returns the current versioning status for the bucket supplied.

Usage examples:

    rclone backend versioning s3:bucket # read status only
    rclone backend versioning s3:bucket Enabled
    rclone backend versioning s3:bucket Suspended

It may return "Enabled", "Suspended" or "Unversioned". Note that once
versioning has been enabled the status can't be set back to
"Unversioned".

set

Set command for updating the config parameters.

    rclone backend set remote: [options] [<arguments>+]

This set command can be used to update the config parameters for a
running s3 backend.

Usage examples:

    rclone backend set s3: [-o opt_name=opt_value] [-o opt_name2=opt_value2]
    rclone rc backend/command command=set fs=s3: [-o opt_name=opt_value] [-o opt_name2=opt_value2]
    rclone rc backend/command command=set fs=s3: -o session_token=X -o access_key_id=X -o secret_access_key=X

The option keys are named as they are in the config file.

This rebuilds the connection to the s3 backend when it is called with
the new parameters. Only new parameters need be passed as the values
will default to those currently in use.

It doesn't return anything.

Anonymous access to public buckets

If you want to use rclone to access a public bucket, configure with a
blank access_key_id and secret_access_key. Your config should end up
looking like this:

    [anons3]
    type = s3
    provider = AWS

Then use it as normal with the name of the public bucket, e.g.

    rclone lsd anons3:1000genomes

You will be able to list and copy data but not upload it.

You can also do this entirely on the command line

    rclone lsd :s3,provider=AWS:1000genomes

Providers

AWS S3

This is the provider used as main example and described in the
configuration section above.

AWS Directory Buckets

From rclone v1.69 Directory Buckets are supported.

You will need to set the directory_buckets = true config parameter or
use --s3-directory-buckets.

Note that rclone cannot yet:

-   Create directory buckets
-   List directory buckets

See the --s3-directory-buckets flag for more info

AWS Snowball Edge

AWS Snowball is a hardware appliance used for transferring bulk data
back to AWS. Its main software interface is S3 object storage.

To use rclone with AWS Snowball Edge devices, configure as standard for
an 'S3 Compatible Service'.

If using rclone pre v1.59 be sure to set upload_cutoff = 0 otherwise you
will run into authentication header issues as the snowball device does
not support query parameter based authentication.

With rclone v1.59 or later setting upload_cutoff should not be
necessary.

eg.

    [snowball]
    type = s3
    provider = Other
    access_key_id = YOUR_ACCESS_KEY
    secret_access_key = YOUR_SECRET_KEY
    endpoint = http://[IP of Snowball]:8080
    upload_cutoff = 0

Alibaba OSS

Here is an example of making an Alibaba Cloud (Aliyun) OSS
configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> oss
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ "s3"
    [snip]
    Storage> s3
    Choose your S3 provider.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Amazon Web Services (AWS) S3
       \ "AWS"
     2 / Alibaba Cloud Object Storage System (OSS) formerly Aliyun
       \ "Alibaba"
     3 / Ceph Object Storage
       \ "Ceph"
    [snip]
    provider> Alibaba
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Enter a boolean value (true or false). Press Enter for the default ("false").
    Choose a number from below, or type in your own value
     1 / Enter AWS credentials in the next step
       \ "false"
     2 / Get AWS credentials from the environment (env vars or IAM)
       \ "true"
    env_auth> 1
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a string value. Press Enter for the default ("").
    access_key_id> accesskeyid
    AWS Secret Access Key (password)
    Leave blank for anonymous access or runtime credentials.
    Enter a string value. Press Enter for the default ("").
    secret_access_key> secretaccesskey
    Endpoint for OSS API.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / East China 1 (Hangzhou)
       \ "oss-cn-hangzhou.aliyuncs.com"
     2 / East China 2 (Shanghai)
       \ "oss-cn-shanghai.aliyuncs.com"
     3 / North China 1 (Qingdao)
       \ "oss-cn-qingdao.aliyuncs.com"
    [snip]
    endpoint> 1
    Canned ACL used when creating buckets and storing or copying objects.

    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Owner gets FULL_CONTROL. No one else has access rights (default).
       \ "private"
     2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access.
       \ "public-read"
       / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
    [snip]
    acl> 1
    The storage class to use when storing new objects in OSS.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Default
       \ ""
     2 / Standard storage class
       \ "STANDARD"
     3 / Archive storage mode.
       \ "GLACIER"
     4 / Infrequent access storage mode.
       \ "STANDARD_IA"
    storage_class> 1
    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> n
    Remote config
    --------------------
    [oss]
    type = s3
    provider = Alibaba
    env_auth = false
    access_key_id = accesskeyid
    secret_access_key = secretaccesskey
    endpoint = oss-cn-hangzhou.aliyuncs.com
    acl = private
    storage_class = Standard
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

ArvanCloud

ArvanCloud ArvanCloud Object Storage goes beyond the limited traditional
file storage. It gives you access to backup and archived files and
allows sharing. Files like profile image in the app, images sent by
users or scanned documents can be stored securely and easily in our
Object Storage service.

ArvanCloud provides an S3 interface which can be configured for use with
rclone like this.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    n/s> n
    name> ArvanCloud
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Amazon S3 (also Dreamhost, Ceph, ChinaMobile, ArvanCloud, Liara, Minio)
       \ "s3"
    [snip]
    Storage> s3
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own value
     1 / Enter AWS credentials in the next step
       \ "false"
     2 / Get AWS credentials from the environment (env vars or IAM)
       \ "true"
    env_auth> 1
    AWS Access Key ID - leave blank for anonymous access or runtime credentials.
    access_key_id> YOURACCESSKEY
    AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
    secret_access_key> YOURSECRETACCESSKEY
    Region to connect to.
    Choose a number from below, or type in your own value
       / The default endpoint - a good choice if you are unsure.
     1 | US Region, Northern Virginia, or Pacific Northwest.
       | Leave location constraint empty.
       \ "us-east-1"
    [snip]
    region> 
    Endpoint for S3 API.
    Leave blank if using ArvanCloud to use the default endpoint for the region.
    Specify if using an S3 clone such as Ceph.
    endpoint> s3.arvanstorage.com
    Location constraint - must be set to match the Region. Used when creating buckets only.
    Choose a number from below, or type in your own value
     1 / Empty for Iran-Tehran Region.
       \ ""
    [snip]
    location_constraint>
    Canned ACL used when creating buckets and/or storing objects in S3.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Choose a number from below, or type in your own value
     1 / Owner gets FULL_CONTROL. No one else has access rights (default).
       \ "private"
    [snip]
    acl>
    The server-side encryption algorithm used when storing this object in S3.
    Choose a number from below, or type in your own value
     1 / None
       \ ""
     2 / AES256
       \ "AES256"
    server_side_encryption>
    The storage class to use when storing objects in S3.
    Choose a number from below, or type in your own value
     1 / Default
       \ ""
     2 / Standard storage class
       \ "STANDARD"
    storage_class>
    Remote config
    --------------------
    [ArvanCloud]
    env_auth = false
    access_key_id = YOURACCESSKEY
    secret_access_key = YOURSECRETACCESSKEY
    region = ir-thr-at1
    endpoint = s3.arvanstorage.com
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [ArvanCloud]
    type = s3
    provider = ArvanCloud
    env_auth = false
    access_key_id = YOURACCESSKEY
    secret_access_key = YOURSECRETACCESSKEY
    region =
    endpoint = s3.arvanstorage.com
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =

BizflyCloud

Bizfly Cloud Simple Storage is an S3-compatible service with regions in
Hanoi (HN) and Ho Chi Minh City (HCM).

Use the endpoint for your region:

-   HN: hn.ss.bfcplatform.vn
-   HCM: hcm.ss.bfcplatform.vn

A minimal configuration looks like this.

    [bizfly]
    type = s3
    provider = BizflyCloud
    env_auth = false
    access_key_id = YOUR_ACCESS_KEY
    secret_access_key = YOUR_SECRET_KEY
    region = HN
    endpoint = hn.ss.bfcplatform.vn
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =

Switch region and endpoint to HCM and hcm.ss.bfcplatform.vn for Ho Chi
Minh City.

Ceph

Ceph is an open-source, unified, distributed storage system designed for
excellent performance, reliability and scalability. It has an S3
compatible object storage interface.

To use rclone with Ceph, configure as above but leave the region blank
and set the endpoint. You should end up with something like this in your
config:

    [ceph]
    type = s3
    provider = Ceph
    env_auth = false
    access_key_id = XXX
    secret_access_key = YYY
    region =
    endpoint = https://ceph.endpoint.example.com
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =

If you are using an older version of CEPH (e.g. 10.2.x Jewel) and a
version of rclone before v1.59 then you may need to supply the parameter
--s3-upload-cutoff 0 or put this in the config file as upload_cutoff 0
to work around a bug which causes uploading of small files to fail.

Note also that Ceph sometimes puts / in the passwords it gives users. If
you read the secret access key using the command line tools you will get
a JSON blob with the / escaped as \/. Make sure you only write / in the
secret access key.

Eg the dump from Ceph looks something like this (irrelevant keys
removed).

    {
        "user_id": "xxx",
        "display_name": "xxxx",
        "keys": [
            {
                "user": "xxx",
                "access_key": "xxxxxx",
                "secret_key": "xxxxxx\/xxxx"
            }
        ],
    }

Because this is a json dump, it is encoding the / as \/, so if you use
the secret key as xxxxxx/xxxx it will work fine.

China Mobile Ecloud Elastic Object Storage (EOS)

Here is an example of making an China Mobile Ecloud Elastic Object
Storage (EOS) configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> ChinaMobile
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
     ...
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
     ...
    Storage> s3
    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     ...
     4 / China Mobile Ecloud Elastic Object Storage (EOS)
       \ (ChinaMobile)
     ...
    provider> ChinaMobile
    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth>
    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> accesskeyid
    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> secretaccesskey
    Option endpoint.
    Endpoint for China Mobile Ecloud Elastic Object Storage (EOS) API.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / The default endpoint - a good choice if you are unsure.
     1 | East China (Suzhou)
       \ (eos-wuxi-1.cmecloud.cn)
     2 / East China (Jinan)
       \ (eos-jinan-1.cmecloud.cn)
     3 / East China (Hangzhou)
       \ (eos-ningbo-1.cmecloud.cn)
     4 / East China (Shanghai-1)
       \ (eos-shanghai-1.cmecloud.cn)
     5 / Central China (Zhengzhou)
       \ (eos-zhengzhou-1.cmecloud.cn)
     6 / Central China (Changsha-1)
       \ (eos-hunan-1.cmecloud.cn)
     7 / Central China (Changsha-2)
       \ (eos-zhuzhou-1.cmecloud.cn)
     8 / South China (Guangzhou-2)
       \ (eos-guangzhou-1.cmecloud.cn)
     9 / South China (Guangzhou-3)
       \ (eos-dongguan-1.cmecloud.cn)
    10 / North China (Beijing-1)
       \ (eos-beijing-1.cmecloud.cn)
    11 / North China (Beijing-2)
       \ (eos-beijing-2.cmecloud.cn)
    12 / North China (Beijing-3)
       \ (eos-beijing-4.cmecloud.cn)
    13 / North China (Huhehaote)
       \ (eos-huhehaote-1.cmecloud.cn)
    14 / Southwest China (Chengdu)
       \ (eos-chengdu-1.cmecloud.cn)
    15 / Southwest China (Chongqing)
       \ (eos-chongqing-1.cmecloud.cn)
    16 / Southwest China (Guiyang)
       \ (eos-guiyang-1.cmecloud.cn)
    17 / Nouthwest China (Xian)
       \ (eos-xian-1.cmecloud.cn)
    18 / Yunnan China (Kunming)
       \ (eos-yunnan.cmecloud.cn)
    19 / Yunnan China (Kunming-2)
       \ (eos-yunnan-2.cmecloud.cn)
    20 / Tianjin China (Tianjin)
       \ (eos-tianjin-1.cmecloud.cn)
    21 / Jilin China (Changchun)
       \ (eos-jilin-1.cmecloud.cn)
    22 / Hubei China (Xiangyan)
       \ (eos-hubei-1.cmecloud.cn)
    23 / Jiangxi China (Nanchang)
       \ (eos-jiangxi-1.cmecloud.cn)
    24 / Gansu China (Lanzhou)
       \ (eos-gansu-1.cmecloud.cn)
    25 / Shanxi China (Taiyuan)
       \ (eos-shanxi-1.cmecloud.cn)
    26 / Liaoning China (Shenyang)
       \ (eos-liaoning-1.cmecloud.cn)
    27 / Hebei China (Shijiazhuang)
       \ (eos-hebei-1.cmecloud.cn)
    28 / Fujian China (Xiamen)
       \ (eos-fujian-1.cmecloud.cn)
    29 / Guangxi China (Nanning)
       \ (eos-guangxi-1.cmecloud.cn)
    30 / Anhui China (Huainan)
       \ (eos-anhui-1.cmecloud.cn)
    endpoint> 1
    Option location_constraint.
    Location constraint - must match endpoint.
    Used when creating buckets only.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / East China (Suzhou)
       \ (wuxi1)
     2 / East China (Jinan)
       \ (jinan1)
     3 / East China (Hangzhou)
       \ (ningbo1)
     4 / East China (Shanghai-1)
       \ (shanghai1)
     5 / Central China (Zhengzhou)
       \ (zhengzhou1)
     6 / Central China (Changsha-1)
       \ (hunan1)
     7 / Central China (Changsha-2)
       \ (zhuzhou1)
     8 / South China (Guangzhou-2)
       \ (guangzhou1)
     9 / South China (Guangzhou-3)
       \ (dongguan1)
    10 / North China (Beijing-1)
       \ (beijing1)
    11 / North China (Beijing-2)
       \ (beijing2)
    12 / North China (Beijing-3)
       \ (beijing4)
    13 / North China (Huhehaote)
       \ (huhehaote1)
    14 / Southwest China (Chengdu)
       \ (chengdu1)
    15 / Southwest China (Chongqing)
       \ (chongqing1)
    16 / Southwest China (Guiyang)
       \ (guiyang1)
    17 / Nouthwest China (Xian)
       \ (xian1)
    18 / Yunnan China (Kunming)
       \ (yunnan)
    19 / Yunnan China (Kunming-2)
       \ (yunnan2)
    20 / Tianjin China (Tianjin)
       \ (tianjin1)
    21 / Jilin China (Changchun)
       \ (jilin1)
    22 / Hubei China (Xiangyan)
       \ (hubei1)
    23 / Jiangxi China (Nanchang)
       \ (jiangxi1)
    24 / Gansu China (Lanzhou)
       \ (gansu1)
    25 / Shanxi China (Taiyuan)
       \ (shanxi1)
    26 / Liaoning China (Shenyang)
       \ (liaoning1)
    27 / Hebei China (Shijiazhuang)
       \ (hebei1)
    28 / Fujian China (Xiamen)
       \ (fujian1)
    29 / Guangxi China (Nanning)
       \ (guangxi1)
    30 / Anhui China (Huainan)
       \ (anhui1)
    location_constraint> 1
    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
     2 | The AllUsers group gets READ access.
       \ (public-read)
       / Owner gets FULL_CONTROL.
     3 | The AllUsers group gets READ and WRITE access.
       | Granting this on a bucket is generally not recommended.
       \ (public-read-write)
       / Owner gets FULL_CONTROL.
     4 | The AuthenticatedUsers group gets READ access.
       \ (authenticated-read)
       / Object owner gets FULL_CONTROL.
    acl> private
    Option server_side_encryption.
    The server-side encryption algorithm used when storing this object in S3.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / None
       \ ()
     2 / AES256
       \ (AES256)
    server_side_encryption>
    Option storage_class.
    The storage class to use when storing new objects in ChinaMobile.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Default
       \ ()
     2 / Standard storage class
       \ (STANDARD)
     3 / Archive storage mode
       \ (GLACIER)
     4 / Infrequent access storage mode
       \ (STANDARD_IA)
    storage_class>
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    --------------------
    [ChinaMobile]
    type = s3
    provider = ChinaMobile
    access_key_id = accesskeyid
    secret_access_key = secretaccesskey
    endpoint = eos-wuxi-1.cmecloud.cn
    location_constraint = wuxi1
    acl = private
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Cloudflare R2

Cloudflare R2 Storage allows developers to store large amounts of
unstructured data without the costly egress bandwidth fees associated
with typical cloud storage services.

Here is an example of making a Cloudflare R2 configuration. First run:

    rclone config

This will guide you through an interactive setup process.

Note that all buckets are private, and all are stored in the same "auto"
region. It is necessary to use Cloudflare workers to share the content
of a bucket publicly.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> r2
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    ...
    XX / Amazon S3 Compliant Storage Providers including AWS, Alibaba, Ceph, China Mobile, Cloudflare, ArvanCloud, DigitalOcean, Dreamhost, Huawei OBS, IBM COS, Lyve Cloud, Minio, Magalu, Netease, RackCorp, Scaleway, SeaweedFS, Storj, Synology, Tencent COS and Wasabi
       \ (s3)
    ...
    Storage> s3
    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    ...
    XX / Cloudflare R2 Storage
       \ (Cloudflare)
    ...
    provider> Cloudflare
    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1
    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY
    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY
    Option region.
    Region to connect to.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / R2 buckets are automatically distributed across Cloudflare's data centers for low latency.
       \ (auto)
    region> 1
    Option endpoint.
    Endpoint for S3 API.
    Required when using an S3 clone.
    Enter a value. Press Enter to leave empty.
    endpoint> https://ACCOUNT_ID.r2.cloudflarestorage.com
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave your config looking something like:

    [r2]
    type = s3
    provider = Cloudflare
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_ACCESS_KEY
    region = auto
    endpoint = https://ACCOUNT_ID.r2.cloudflarestorage.com
    acl = private

Now run rclone lsf r2: to see your buckets and rclone lsf r2:bucket to
look within a bucket.

For R2 tokens with the "Object Read & Write" permission, you may also
need to add no_check_bucket = true for object uploads to work correctly.

Note that Cloudflare decompresses files uploaded with
Content-Encoding: gzip by default which is a deviation from what AWS
does. If this is causing a problem then upload the files with
--header-upload "Cache-Control: no-transform"

A consequence of this is that Content-Encoding: gzip will never appear
in the metadata on Cloudflare.

Cubbit DS3

Cubbit Object Storage is a geo-distributed cloud object storage
platform.

To connect to Cubbit DS3 you will need an access key and secret key
pair. You can follow this guide to retrieve these keys. They will be
needed when prompted by rclone config.

Default region will correspond to eu-west-1 and the endpoint has to be
specified as s3.cubbit.eu. If you set a custom tenant endpoint, you must
use s3.{tenant_name}.cubbit.eu, because the generic s3.cubbit.eu
endpoint will not work in this case.

Going through the whole process of creating a new remote by running
rclone config, each prompt should be answered as shown below:

    name> cubbit-ds3 (or any name you like)
    Storage> s3
    provider> Cubbit
    env_auth> false
    access_key_id> YOUR_ACCESS_KEY
    secret_access_key> YOUR_SECRET_KEY
    region> eu-west-1 (or leave empty)
    endpoint> s3.cubbit.eu (or s3.{tenant_name}.cubbit.eu)
    acl>

The resulting configuration file should look like:

    [cubbit-ds3]
    type = s3
    provider = Cubbit
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_KEY
    region = eu-west-1
    endpoint = s3.cubbit.eu

You can then start using Cubbit DS3 with rclone. For example, to create
a new bucket and copy files into it, you can run:

    rclone mkdir cubbit-ds3:my-bucket
    rclone copy /path/to/files cubbit-ds3:my-bucket

DigitalOcean Spaces

Spaces is an S3-interoperable object storage service from cloud provider
DigitalOcean.

To connect to DigitalOcean Spaces you will need an access key and secret
key. These can be retrieved on the Applications & API page of the
DigitalOcean control panel. They will be needed when prompted by
rclone config for your access_key_id and secret_access_key.

When prompted for a region or location_constraint, press enter to use
the default value. The region must be included in the endpoint setting
(e.g. nyc3.digitaloceanspaces.com). The default values can be used for
other settings.

Going through the whole process of creating a new remote by running
rclone config, each prompt should be answered as shown below:

    Storage> s3
    env_auth> 1
    access_key_id> YOUR_ACCESS_KEY
    secret_access_key> YOUR_SECRET_KEY
    region>
    endpoint> nyc3.digitaloceanspaces.com
    location_constraint>
    acl>
    storage_class>

The resulting configuration file should look like:

    [spaces]
    type = s3
    provider = DigitalOcean
    env_auth = false
    access_key_id = YOUR_ACCESS_KEY
    secret_access_key = YOUR_SECRET_KEY
    region =
    endpoint = nyc3.digitaloceanspaces.com
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =

Once configured, you can create a new Space and begin copying files. For
example:

    rclone mkdir spaces:my-new-space
    rclone copy /path/to/files spaces:my-new-space

Dreamhost

Dreamhost DreamObjects is an object storage system based on CEPH.

To use rclone with Dreamhost, configure as above but leave the region
blank and set the endpoint. You should end up with something like this
in your config:

    [dreamobjects]
    type = s3
    provider = DreamHost
    env_auth = false
    access_key_id = your_access_key
    secret_access_key = your_secret_key
    region =
    endpoint = objects-us-west-1.dream.io
    location_constraint =
    acl = private
    server_side_encryption =
    storage_class =

Exaba

Exaba is an on-premises, S3-compatible storage for service providers and
large enterprises. It is quick to deploy, with dynamic node management,
tenant accounting, and a built-in key management system. It delivers
secure, high-performance data storage with flexible, usage-based
pricing.

A container version exaba/exaba is free for end-users and on that page
you can find instructions on how to set it up. You will need to log into
the admin first (on port 9006 by default) to set up the container, then
you can use the service on port 9000.

You can also join the exaba support slack if you need more help.

An rclone config walkthrough might look like this but details may vary
depending exactly on how you have set up the container.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> exaba

    Option Storage.
    Type of storage to configure.
    Storage> s3

    Option provider.
    Choose your S3 provider.
    provider> Exaba

    Option env_auth.
    env_auth> 1

    Option access_key_id.
    access_key_id> XXX

    Option secret_access_key.
    secret_access_key> YYY

    Option region.
    region>

    Option endpoint.
    endpoint> http://127.0.0.1:9000/

    Option location_constraint.
    location_constraint>

    Option acl.
    acl>

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

And the config generated will end up looking like this:

    [exaba]
    type = s3
    provider = Exaba
    access_key_id = XXX
    secret_access_key = XXX
    endpoint = http://127.0.0.1:9000/

Fastly Object Storage

Fastly Object Storage is an S3-compatible object storage service from
Fastly. It provides three regions (US East, US West, and EU Central)
with mandatory server-side encryption.

Here is an example of making a configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> fastly

    Option Storage.
    Type of storage to configure.
    Storage> s3

    Option provider.
    Choose your S3 provider.
    provider> Fastly

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    env_auth> false

    Option access_key_id.
    AWS Access Key ID.
    access_key_id> YOUR_ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    secret_access_key> YOUR_SECRET_KEY

    Option region.
    Region where your bucket will be created and your data stored.
    region> us-east

    Option endpoint.
    Endpoint for S3 API.
    endpoint> us-east.object.fastlystorage.app

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Fastly
    - access_key_id: YOUR_ACCESS_KEY
    - secret_access_key: YOUR_SECRET_KEY
    - region: us-east
    - endpoint: us-east.object.fastlystorage.app
    Keep this "fastly" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

The resulting configuration file should look like:

    [fastly]
    type = s3
    provider = Fastly
    access_key_id = YOUR_ACCESS_KEY
    secret_access_key = YOUR_SECRET_KEY
    region = us-east
    endpoint = us-east.object.fastlystorage.app

Google Cloud Storage

GoogleCloudStorage is an S3-interoperable object storage service from
Google Cloud Platform.

To connect to Google Cloud Storage you will need an access key and
secret key. These can be retrieved by creating an HMAC key.

    [gs]
    type = s3
    provider = GCS
    access_key_id = your_access_key
    secret_access_key = your_secret_key
    endpoint = https://storage.googleapis.com

Note that --s3-versions does not work with GCS when it needs to do
directory paging. Rclone will return the error:

    s3 protocol error: received versions listing with IsTruncated set with no NextKeyMarker

This is Google bug #312292516.

Hetzner Object Storage

Here is an example of making a Hetzner Object Storage configuration.
First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> my-hetzner
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
     XX / Amazon S3 Compliant Storage Providers including AWS, Alibaba, ArvanCloud, Ceph, ChinaMobile, Cloudflare, DigitalOcean, Dreamhost, GCS, Hetzner, HuaweiOBS, IBMCOS, IDrive, IONOS, LyveCloud, Leviia, Liara, Linode, Magalu, Minio, Netease, Outscale, Petabox, RackCorp, Rclone, Scaleway, SeaweedFS, Selectel, Storj, Synology, TencentCOS, Wasabi, Qiniu and others
       \ (s3)
    [snip]
    Storage> s3
    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Hetzner Object Storage
       \ (Hetzner)
    [snip]
    provider> Hetzner
    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 
    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY
    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_KEY
    Option region.
    Region to connect to.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Helsinki
       \ (hel1)
     2 / Falkenstein
       \ (fsn1)
     3 / Nuremberg
       \ (nbg1)
    region> 
    Option endpoint.
    Endpoint for Hetzner Object Storage
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Helsinki
       \ (hel1.your-objectstorage.com)
     2 / Falkenstein
       \ (fsn1.your-objectstorage.com)
     3 / Nuremberg
       \ (nbg1.your-objectstorage.com)
    endpoint> 
    Option location_constraint.
    Location constraint - must be set to match the Region.
    Leave blank if not sure. Used when creating buckets only.
    Enter a value. Press Enter to leave empty.
    location_constraint> 
    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
     2 | The AllUsers group gets READ access.
       \ (public-read)
    acl> 
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> 
    Configuration complete.
    Options:
    - type: s3
    - provider: Hetzner
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_KEY
    Keep this "my-hetzner" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> 
    Current remotes:

    Name                 Type
    ====                 ====
    my-hetzner           s3

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> 

This will leave the config file looking like this.

    [my-hetzner]
    type = s3
    provider = Hetzner
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_KEY
    region = hel1
    endpoint = hel1.your-objectstorage.com
    acl = private

Hitachi Content Platform (HCP)

Here is an example of making a Hitachi Content Platform (HCP)
configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> my-hcp
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
     XX / Amazon S3 Compliant Storage Providers including AWS, Alibaba, ArvanCloud, Ceph, ChinaMobile, Cloudflare, DigitalOcean, Dreamhost, GCS, HCP, Hetzner, HuaweiOBS, IBMCOS, IDrive, IONOS, LyveCloud, Leviia, Liara, Linode, Magalu, Minio, Netease, Outscale, Petabox, RackCorp, Rclone, Scaleway, SeaweedFS, Selectel, Storj, Synology, TencentCOS, Wasabi, Qiniu and others
       \ (s3)
    [snip]
    Storage> s3
    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Hitachi Content Platform (HCP)
       \ (HCP)
    [snip]
    provider> HCP
    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 
    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY
    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_KEY
    Option endpoint.
    Endpoint for HCP S3 compatible API.
    Enter a value. Press Enter to leave empty.
    endpoint> https://hcp.example.com
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> 
    Configuration complete.
    Options:
    - type: s3
    - provider: HCP
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_KEY
    - endpoint: https://hcp.example.com
    Keep this "my-hcp" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> 
    Current remotes:

    Name                 Type
    ====                 ====
    my-hcp               s3

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> 

This will leave the config file looking like this.

    [my-hcp]
    type = s3
    provider = HCP
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_KEY
    endpoint = https://hcp.example.com

Known limitations

These limitations have been observed with HCP version 9.7.x.

Automatic directory objects

HCP automatically creates zero-byte directory objects (keys ending in /)
for every path component when an object is stored. These directory
objects are managed by HCP internally: deleting one via the S3 API does
not remove it but instead creates a delete marker with a special version
ID (-3) that cannot itself be deleted. As a result, rclone cannot fully
purge a bucket on HCP — leftover directory objects will remain after a
purge or delete operation.

Transparent gzip decompression

HCP transparently decompresses objects uploaded with
Content-Encoding: gzip before storing them. This means the stored object
contains the raw (uncompressed) data, while the Content-MD5 sent by
rclone was computed over the compressed bytes. HCP will reject such
uploads with a BadDigest error. To avoid this, do not set
content-encoding: gzip in object metadata when using HCP.

Huawei OBS

Object Storage Service (OBS) provides stable, secure, efficient, and
easy-to-use cloud storage that lets you store virtually any volume of
unstructured data in any format and access it from anywhere.

OBS provides an S3 interface, you can copy and modify the following
configuration and add it to your rclone configuration file.

    [obs]
    type = s3
    provider = HuaweiOBS
    access_key_id = your-access-key-id
    secret_access_key = your-secret-access-key
    region = af-south-1
    endpoint = obs.af-south-1.myhuaweicloud.com
    acl = private

Or you can also configure via the interactive command line:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> obs
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
    [snip]
    Storage> s3
    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
     9 / Huawei Object Storage Service
       \ (HuaweiOBS)
    [snip]
    provider> 9
    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1
    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> your-access-key-id
    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> your-secret-access-key
    Option region.
    Region to connect to.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / AF-Johannesburg
       \ (af-south-1)
     2 / AP-Bangkok
       \ (ap-southeast-2)
    [snip]
    region> 1
    Option endpoint.
    Endpoint for OBS API.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / AF-Johannesburg
       \ (obs.af-south-1.myhuaweicloud.com)
     2 / AP-Bangkok
       \ (obs.ap-southeast-2.myhuaweicloud.com)
    [snip]
    endpoint> 1
    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
    [snip]
    acl> 1
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n>
    --------------------
    [obs]
    type = s3
    provider = HuaweiOBS
    access_key_id = your-access-key-id
    secret_access_key = your-secret-access-key
    region = af-south-1
    endpoint = obs.af-south-1.myhuaweicloud.com
    acl = private
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:

    Name                 Type
    ====                 ====
    obs                  s3

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q

IBM COS (S3)

Information stored with IBM Cloud Object Storage is encrypted and
dispersed across multiple geographic locations, and accessed through an
implementation of the S3 API. This service makes use of the distributed
storage technologies provided by IBM’s Cloud Object Storage System
(formerly Cleversafe). For more information visit:
http://www.ibm.com/cloud/object-storage

To configure access to IBM COS S3, follow the steps below:

1.  Run rclone config and select n for a new remote.

        2018/02/14 14:13:11 NOTICE: Config file "C:\\Users\\a\\.config\\rclone\\rclone.conf" not found - using defaults
        No remotes found, make a new one?
        n) New remote
        s) Set configuration password
        q) Quit config
        n/s/q> n

2.  Enter the name for the configuration

        name> <YOUR NAME>

3.  Select "s3" storage.

        Choose a number from below, or type in your own value
        [snip]
        XX / Amazon S3 Compliant Storage Providers including AWS, ...
           \ "s3"
        [snip]
        Storage> s3

4.  Select IBM COS as the S3 Storage Provider.

        Choose the S3 provider.
        Choose a number from below, or type in your own value
           1 / Choose this option to configure Storage to AWS S3
             \ "AWS"
           2 / Choose this option to configure Storage to Ceph Systems
             \ "Ceph"
           3 /  Choose this option to configure Storage to Dreamhost
             \ "Dreamhost"
           4 / Choose this option to the configure Storage to IBM COS S3
             \ "IBMCOS"
           5 / Choose this option to the configure Storage to Minio
             \ "Minio"
           Provider>4

5.  Enter the Access Key and Secret.

        AWS Access Key ID - leave blank for anonymous access or runtime credentials.
        access_key_id> <>
        AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
        secret_access_key> <>

6.  Specify the endpoint for IBM COS. For Public IBM COS, choose from
    the option below. For On Premise IBM COS, enter an endpoint address.

        Endpoint for IBM COS S3 API.
        Specify if using an IBM COS On Premise.
        Choose a number from below, or type in your own value
         1 / US Cross Region Endpoint
           \ "s3-api.us-geo.objectstorage.softlayer.net"
         2 / US Cross Region Dallas Endpoint
           \ "s3-api.dal.us-geo.objectstorage.softlayer.net"
         3 / US Cross Region Washington DC Endpoint
           \ "s3-api.wdc-us-geo.objectstorage.softlayer.net"
         4 / US Cross Region San Jose Endpoint
           \ "s3-api.sjc-us-geo.objectstorage.softlayer.net"
         5 / US Cross Region Private Endpoint
           \ "s3-api.us-geo.objectstorage.service.networklayer.com"
         6 / US Cross Region Dallas Private Endpoint
           \ "s3-api.dal-us-geo.objectstorage.service.networklayer.com"
         7 / US Cross Region Washington DC Private Endpoint
           \ "s3-api.wdc-us-geo.objectstorage.service.networklayer.com"
         8 / US Cross Region San Jose Private Endpoint
           \ "s3-api.sjc-us-geo.objectstorage.service.networklayer.com"
         9 / US Region East Endpoint
           \ "s3.us-east.objectstorage.softlayer.net"
        10 / US Region East Private Endpoint
           \ "s3.us-east.objectstorage.service.networklayer.com"
        11 / US Region South Endpoint
        [snip]
        34 / Toronto Single Site Private Endpoint
           \ "s3.tor01.objectstorage.service.networklayer.com"
        endpoint>1

7.  Specify a IBM COS Location Constraint. The location constraint must
    match endpoint when using IBM Cloud Public. For on-prem COS, do not
    make a selection from this list, hit enter

         1 / US Cross Region Standard
           \ "us-standard"
         2 / US Cross Region Vault
           \ "us-vault"
         3 / US Cross Region Cold
           \ "us-cold"
         4 / US Cross Region Flex
           \ "us-flex"
         5 / US East Region Standard
           \ "us-east-standard"
         6 / US East Region Vault
           \ "us-east-vault"
         7 / US East Region Cold
           \ "us-east-cold"
         8 / US East Region Flex
           \ "us-east-flex"
         9 / US South Region Standard
           \ "us-south-standard"
        10 / US South Region Vault
           \ "us-south-vault"
        [snip]
        32 / Toronto Flex
           \ "tor01-flex"
        location_constraint>1

8.  Specify a canned ACL. IBM Cloud (Storage) supports "public-read" and
    "private". IBM Cloud(Infra) supports all the canned ACLs. On-Premise
    COS supports all the canned ACLs.

        Canned ACL used when creating buckets and/or storing objects in S3.
        For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
        Choose a number from below, or type in your own value
              1 / Owner gets FULL_CONTROL. No one else has access rights (default). This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise COS
              \ "private"
              2  / Owner gets FULL_CONTROL. The AllUsers group gets READ access. This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise IBM COS
              \ "public-read"
              3 / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access. This acl is available on IBM Cloud (Infra), On-Premise IBM COS
              \ "public-read-write"
              4  / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access. Not supported on Buckets. This acl is available on IBM Cloud (Infra) and On-Premise IBM COS
              \ "authenticated-read"
        acl> 1

9.  Review the displayed configuration and accept to save the "remote"
    then quit. The config file should look like this

        [xxx]
        type = s3
        Provider = IBMCOS
        access_key_id = xxx
        secret_access_key = yyy
        endpoint = s3-api.us-geo.objectstorage.softlayer.net
        location_constraint = us-standard
        acl = private

10. Execute rclone commands

    1) Create a bucket.
       rclone mkdir IBM-COS-XREGION:newbucket
    2) List available buckets.
       rclone lsd IBM-COS-XREGION:
       -1 2017-11-08 21:16:22        -1 test
       -1 2018-02-14 20:16:39        -1 newbucket
    3) List contents of a bucket.
        rclone ls IBM-COS-XREGION:newbucket
        18685952 test.exe
    4) Copy a file from local to remote.
       rclone copy /Users/file.txt IBM-COS-XREGION:newbucket
    5) Copy a file from remote to local.
       rclone copy IBM-COS-XREGION:newbucket/file.txt .
    6) Delete a file on remote.
       rclone delete IBM-COS-XREGION:newbucket/file.txt

IBM IAM authentication

If using IBM IAM authentication with IBM API KEY you need to fill in
these additional parameters

1.  Select false for env_auth

2.  Leave access_key_id and secret_access_key blank

3.  Paste your ibm_api_key

        Option ibm_api_key.
        IBM API Key to be used to obtain IAM token
        Enter a value of type string. Press Enter for the default (1).
        ibm_api_key>

4.  Paste your ibm_resource_instance_id

        Option ibm_resource_instance_id.
        IBM service instance id
        Enter a value of type string. Press Enter for the default (2).
        ibm_resource_instance_id>

5.  In advanced settings type true for v2_auth

        Option v2_auth.
        If true use v2 authentication.
        If this is false (the default) then rclone will use v4 authentication.
        If it is set then rclone will use v2 authentication.
        Use this only if v4 signatures don't work, e.g. pre Jewel/v10 CEPH.
        Enter a boolean value (true or false). Press Enter for the default (true).
        v2_auth>

IDrive e2

Here is an example of making an IDrive e2 configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> e2

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / IDrive e2
       \ (IDrive)
    [snip]
    provider> IDrive

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> YOUR_ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> YOUR_SECRET_KEY

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
     2 | The AllUsers group gets READ access.
       \ (public-read)
       / Owner gets FULL_CONTROL.
     3 | The AllUsers group gets READ and WRITE access.
       | Granting this on a bucket is generally not recommended.
       \ (public-read-write)
       / Owner gets FULL_CONTROL.
     4 | The AuthenticatedUsers group gets READ access.
       \ (authenticated-read)
       / Object owner gets FULL_CONTROL.
     5 | Bucket owner gets READ access.
       | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-read)
       / Both the object owner and the bucket owner get FULL_CONTROL over the object.
     6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-full-control)
    acl> 

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> 

    Configuration complete.
    Options:
    - type: s3
    - provider: IDrive
    - access_key_id: YOUR_ACCESS_KEY
    - secret_access_key: YOUR_SECRET_KEY
    - endpoint: q9d9.la12.idrivee2-5.com
    Keep this "e2" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Impossible Cloud

Impossible Cloud is a European S3-compatible object storage provider
with regions in Europe and the US.

Note: Impossible Cloud does not preserve the Cache-Control,
Content-Disposition, Content-Encoding or Content-Language system
metadata fields on retrieval, even when they were set at upload time.
Because the Content-Encoding response header is also dropped, the
--s3-decompress flag has no effect on objects stored there. Other
metadata such as Content-Type and the modification time round-trip
normally.

Here is an example of making an Impossible Cloud configuration. First
run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> my-impossible-cloud
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
     XX / Amazon S3 Compliant Storage Providers including AWS, Alibaba, ArvanCloud, Ceph, ChinaMobile, Cloudflare, DigitalOcean, Dreamhost, GCS, Hetzner, HuaweiOBS, IBMCOS, IDrive, ImpossibleCloud, IONOS, LyveCloud, Leviia, Liara, Linode, Magalu, Minio, Netease, Outscale, Petabox, RackCorp, Rclone, Scaleway, SeaweedFS, Selectel, Storj, Synology, TencentCOS, Wasabi, Qiniu and others
       \ (s3)
    [snip]
    Storage> s3
    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Impossible Cloud Object Storage
       \ (ImpossibleCloud)
    [snip]
    provider> ImpossibleCloud
    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 
    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY
    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_KEY
    Option region.
    Region to connect to.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Frankfurt, Germany
       \ (eu-central-2)
     2 / Amsterdam, Netherlands
       \ (eu-west-1)
     3 / London, UK
       \ (eu-west-2)
     4 / Paris, France
       \ (eu-west-3)
     5 / Poznań, Poland
       \ (eu-east-1)
     6 / Copenhagen, Denmark
       \ (eu-north-1)
     7 / New York, USA
       \ (us-east-1)
    region> 1
    Option endpoint.
    Endpoint for Impossible Cloud Object Storage
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Frankfurt, Germany
       \ (eu-central-2.storage.impossibleapi.net)
     2 / Amsterdam, Netherlands
       \ (eu-west-1.storage.impossibleapi.net)
     3 / London, UK
       \ (eu-west-2.storage.impossibleapi.net)
     4 / Paris, France
       \ (eu-west-3.storage.impossibleapi.net)
     5 / Poznań, Poland
       \ (eu-east-1.storage.impossibleapi.net)
     6 / Copenhagen, Denmark
       \ (eu-north-1.storage.impossibleapi.net)
     7 / New York, USA
       \ (us-east-1.storage.impossibleapi.net)
    endpoint> 1
    Option location_constraint.
    Location constraint - must be set to match the Region.
    Leave blank if not sure. Used when creating buckets only.
    Enter a value. Press Enter to leave empty.
    location_constraint> 
    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
     2 | The AllUsers group gets READ access.
       \ (public-read)
    acl> 
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> 
    Configuration complete.
    Options:
    - type: s3
    - provider: ImpossibleCloud
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_KEY
    - region: eu-central-2
    - endpoint: eu-central-2.storage.impossibleapi.net
    Keep this "my-impossible-cloud" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> 
    Current remotes:

    Name                 Type
    ====                 ====
    my-impossible-cloud  s3

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> 

This will leave the config file looking like this.

    [my-impossible-cloud]
    type = s3
    provider = ImpossibleCloud
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_KEY
    region = eu-central-2
    endpoint = eu-central-2.storage.impossibleapi.net
    acl = private

Intercolo Object Storage

Intercolo Object Storage offers GDPR-compliant, transparently priced,
S3-compatible cloud storage hosted in Frankfurt, Germany.

Here's an example of making a configuration for Intercolo.

First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> intercolo

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
     xx / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    xx / Intercolo Object Storage
       \ (Intercolo)
    [snip]
    provider> Intercolo

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> false

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_KEY

    Option region.
    Region where your bucket will be created and your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Frankfurt, Germany
       \ (de-fra)
    region> 1

    Option endpoint.
    Endpoint for Intercolo Object Storage.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Frankfurt, Germany
       \ (de-fra.i3storage.com)
    endpoint> 1

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
     [snip]
    acl> 

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Intercolo
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_KEY
    - region: de-fra
    - endpoint: de-fra.i3storage.com
    Keep this "intercolo" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [intercolo]
    type = s3
    provider = Intercolo
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_KEY
    region = de-fra
    endpoint = de-fra.i3storage.com

IONOS Cloud

IONOS S3 Object Storage is a service offered by IONOS for storing and
accessing unstructured data. To connect to the service, you will need an
access key and a secret key. These can be found in the Data Center
Designer, by selecting Manager resources > Object Storage Key Manager.

Here is an example of a configuration. First, run rclone config. This
will walk you through an interactive setup process. Type n to add the
new remote, and then enter a name:

    Enter name for new remote.
    name> ionos-fra

Type s3 to choose the connection type:

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
    [snip]
    Storage> s3

Type IONOS:

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / IONOS Cloud
       \ (IONOS)
    [snip]
    provider> IONOS

Press Enter to choose the default option
Enter AWS credentials in the next step:

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth>

Enter your Access Key and Secret key. These can be retrieved in the Data
Center Designer, click on the menu "Manager resources" / "Object Storage
Key Manager".

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> YOUR_ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> YOUR_SECRET_KEY

Choose the region where your bucket is located:

    Option region.
    Region where your bucket will be created and your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Frankfurt, Germany
       \ (de)
     2 / Berlin, Germany
       \ (eu-central-2)
     3 / Logrono, Spain
       \ (eu-south-2)
    region> 2

Choose the endpoint from the same region:

    Option endpoint.
    Endpoint for IONOS S3 Object Storage.
    Specify the endpoint from the same region.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Frankfurt, Germany
       \ (s3-eu-central-1.ionoscloud.com)
     2 / Berlin, Germany
       \ (s3-eu-central-2.ionoscloud.com)
     3 / Logrono, Spain
       \ (s3-eu-south-2.ionoscloud.com)
    endpoint> 1

Press Enter to choose the default option or choose the desired ACL
setting:

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
    [snip]
    acl>

Press Enter to skip the advanced config:

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n>

Press Enter to save the configuration, and then q to quit the
configuration process:

    Configuration complete.
    Options:
    - type: s3
    - provider: IONOS
    - access_key_id: YOUR_ACCESS_KEY
    - secret_access_key: YOUR_SECRET_KEY
    - endpoint: s3-eu-central-1.ionoscloud.com
    Keep this "ionos-fra" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Done! Now you can try some commands (for macOS, use ./rclone instead of
rclone).

1)  Create a bucket (the name must be unique within the whole IONOS S3)

        rclone mkdir ionos-fra:my-bucket

2)  List available buckets

        rclone lsd ionos-fra:

3)  Copy a file from local to remote

        rclone copy /Users/file.txt ionos-fra:my-bucket

4)  List contents of a bucket

        rclone ls ionos-fra:my-bucket

5)  Copy a file from remote to local

        rclone copy ionos-fra:my-bucket/file.txt

Leviia Cloud Object Storage

Leviia Object Storage, backup and secure your data in a 100% French
cloud, independent of GAFAM..

To configure access to Leviia, follow the steps below:

1.  Run rclone config and select n for a new remote.

        rclone config
        No remotes found, make a new one?
        n) New remote
        s) Set configuration password
        q) Quit config
        n/s/q> n

2.  Give the name of the configuration. For example, name it 'leviia'.

        name> leviia

3.  Select s3 storage.

        Choose a number from below, or type in your own value
        [snip]
        XX / Amazon S3 Compliant Storage Providers including AWS, ...
           \ (s3)
        [snip]
        Storage> s3

4.  Select Leviia provider.

        Choose a number from below, or type in your own value
        1 / Amazon Web Services (AWS) S3
           \ "AWS"
        [snip]
        15 / Leviia Object Storage
           \ (Leviia)
        [snip]
        provider> Leviia

5.  Enter your SecretId and SecretKey of Leviia.

        Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
        Only applies if access_key_id and secret_access_key is blank.
        Enter a boolean value (true or false). Press Enter for the default ("false").
        Choose a number from below, or type in your own value
         1 / Enter AWS credentials in the next step
           \ "false"
         2 / Get AWS credentials from the environment (env vars or IAM)
           \ "true"
        env_auth> 1
        AWS Access Key ID.
        Leave blank for anonymous access or runtime credentials.
        Enter a string value. Press Enter for the default ("").
        access_key_id> ZnIx.xxxxxxxxxxxxxxx
        AWS Secret Access Key (password)
        Leave blank for anonymous access or runtime credentials.
        Enter a string value. Press Enter for the default ("").
        secret_access_key> xxxxxxxxxxx

6.  Select endpoint for Leviia.

           / The default endpoint
         1 | Leviia.
           \ (s3.leviia.com)
        [snip]
        endpoint> 1

7.  Choose acl.

        Note that this ACL is applied when server-side copying objects as S3
        doesn't copy the ACL from the source but rather writes a fresh one.
        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
           / Owner gets FULL_CONTROL.
         1 | No one else has access rights (default).
           \ (private)
           / Owner gets FULL_CONTROL.
         2 | The AllUsers group gets READ access.
           \ (public-read)
        [snip]
        acl> 1
        Edit advanced config? (y/n)
        y) Yes
        n) No (default)
        y/n> n
        Remote config
        --------------------
        [leviia]
        - type: s3
        - provider: Leviia
        - access_key_id: ZnIx.xxxxxxx
        - secret_access_key: xxxxxxxx
        - endpoint: s3.leviia.com
        - acl: private
        --------------------
        y) Yes this is OK (default)
        e) Edit this remote
        d) Delete this remote
        y/e/d> y
        Current remotes:

        Name                 Type
        ====                 ====
        leviia                s3

Liara

Here is an example of making a Liara Object Storage configuration. First
run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    n/s> n
    name> Liara
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Amazon S3 (also Dreamhost, Ceph, ChinaMobile, ArvanCloud, Liara, Minio)
       \ "s3"
    [snip]
    Storage> s3
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own value
     1 / Enter AWS credentials in the next step
       \ "false"
     2 / Get AWS credentials from the environment (env vars or IAM)
       \ "true"
    env_auth> 1
    AWS Access Key ID - leave blank for anonymous access or runtime credentials.
    access_key_id> YOURACCESSKEY
    AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
    secret_access_key> YOURSECRETACCESSKEY
    Region to connect to.
    Choose a number from below, or type in your own value
       / The default endpoint
     1 | US Region, Northern Virginia, or Pacific Northwest.
       | Leave location constraint empty.
       \ "us-east-1"
    [snip]
    region>
    Endpoint for S3 API.
    Leave blank if using Liara to use the default endpoint for the region.
    Specify if using an S3 clone such as Ceph.
    endpoint> storage.iran.liara.space
    Canned ACL used when creating buckets and/or storing objects in S3.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Choose a number from below, or type in your own value
     1 / Owner gets FULL_CONTROL. No one else has access rights (default).
       \ "private"
    [snip]
    acl>
    The server-side encryption algorithm used when storing this object in S3.
    Choose a number from below, or type in your own value
     1 / None
       \ ""
     2 / AES256
       \ "AES256"
    server_side_encryption>
    The storage class to use when storing objects in S3.
    Choose a number from below, or type in your own value
     1 / Default
       \ ""
     2 / Standard storage class
       \ "STANDARD"
    storage_class>
    Remote config
    --------------------
    [Liara]
    env_auth = false
    access_key_id = YOURACCESSKEY
    secret_access_key = YOURSECRETACCESSKEY
    endpoint = storage.iran.liara.space
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [Liara]
    type = s3
    provider = Liara
    env_auth = false
    access_key_id = YOURACCESSKEY
    secret_access_key = YOURSECRETACCESSKEY
    region =
    endpoint = storage.iran.liara.space
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =

Linode

Here is an example of making a Linode Object Storage configuration.
First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> linode

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...Linode, ...and others
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Linode Object Storage
       \ (Linode)
    [snip]
    provider> Linode

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY

    Option endpoint.
    Endpoint for Linode Object Storage API.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Amsterdam (Netherlands), nl-ams-1
       \ (nl-ams-1.linodeobjects.com)
     2 / Atlanta, GA (USA), us-southeast-1
       \ (us-southeast-1.linodeobjects.com)
     3 / Chennai (India), in-maa-1
       \ (in-maa-1.linodeobjects.com)
     4 / Chicago, IL (USA), us-ord-1
       \ (us-ord-1.linodeobjects.com)
     5 / Frankfurt (Germany), eu-central-1
       \ (eu-central-1.linodeobjects.com)
     6 / Jakarta (Indonesia), id-cgk-1
       \ (id-cgk-1.linodeobjects.com)
     7 / London 2 (Great Britain), gb-lon-1
       \ (gb-lon-1.linodeobjects.com)
     8 / Los Angeles, CA (USA), us-lax-1
       \ (us-lax-1.linodeobjects.com)
     9 / Madrid (Spain), es-mad-1
       \ (es-mad-1.linodeobjects.com)
    10 / Melbourne (Australia), au-mel-1
       \ (au-mel-1.linodeobjects.com)
    11 / Miami, FL (USA), us-mia-1
       \ (us-mia-1.linodeobjects.com)
    12 / Milan (Italy), it-mil-1
       \ (it-mil-1.linodeobjects.com)
    13 / Newark, NJ (USA), us-east-1
       \ (us-east-1.linodeobjects.com)
    14 / Osaka (Japan), jp-osa-1
       \ (jp-osa-1.linodeobjects.com)
    15 / Paris (France), fr-par-1
       \ (fr-par-1.linodeobjects.com)
    16 / São Paulo (Brazil), br-gru-1
       \ (br-gru-1.linodeobjects.com)
    17 / Seattle, WA (USA), us-sea-1
       \ (us-sea-1.linodeobjects.com)
    18 / Singapore, ap-south-1
       \ (ap-south-1.linodeobjects.com)
    19 / Singapore 2, sg-sin-1
       \ (sg-sin-1.linodeobjects.com)
    20 / Stockholm (Sweden), se-sto-1
       \ (se-sto-1.linodeobjects.com)
    21 / Washington, DC, (USA), us-iad-1
       \ (us-iad-1.linodeobjects.com)
    endpoint> 5

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
    [snip]
    acl> 

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Linode
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_ACCESS_KEY
    - endpoint: eu-central-1.linodeobjects.com
    Keep this "linode" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [linode]
    type = s3
    provider = Linode
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_ACCESS_KEY
    endpoint = eu-central-1.linodeobjects.com

Magalu

Here is an example of making a Magalu Object Storage configuration.
First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> magalu

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...Magalu, ...and others
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Magalu Object Storage
       \ (Magalu)
    [snip]
    provider> Magalu

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY

    Option endpoint.
    Endpoint for Magalu Object Storage API.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / São Paulo, SP (BR), br-se1
       \ (br-se1.magaluobjects.com)
     2 / Fortaleza, CE (BR), br-ne1
       \ (br-ne1.magaluobjects.com)
    endpoint> 2

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
    [snip]
    acl> 

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: magalu
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_ACCESS_KEY
    - endpoint: br-ne1.magaluobjects.com
    Keep this "magalu" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [magalu]
    type = s3
    provider = Magalu
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_ACCESS_KEY
    endpoint = br-ne1.magaluobjects.com

MEGA S4

MEGA S4 Object Storage is an S3 compatible object storage system. It has
a single pricing tier with no additional charges for data transfers or
API requests and it is included in existing Pro plans.

Here is an example of making a configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> megas4

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS,... Mega, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / MEGA S4 Object Storage
       \ (Mega)
    [snip]
    provider> Mega

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth>

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> XXX

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> XXX

    Option endpoint.
    Endpoint for S3 API.
    Required when using an S3 clone.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Mega S4 eu-central-1 (Amsterdam)
       \ (s3.eu-central-1.s4.mega.io)
     2 / Mega S4 eu-central-2 (Bettembourg)
       \ (s3.eu-central-2.s4.mega.io)
     3 / Mega S4 ca-central-1 (Montreal)
       \ (s3.ca-central-1.s4.mega.io)
     4 / Mega S4 ca-west-1 (Vancouver)
       \ (s3.ca-west-1.s4.mega.io)
    endpoint> 1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Mega
    - access_key_id: XXX
    - secret_access_key: XXX
    - endpoint: s3.eu-central-1.s4.mega.io
    Keep this "megas4" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [megas4]
    type = s3
    provider = Mega
    access_key_id = XXX
    secret_access_key = XXX
    endpoint = s3.eu-central-1.s4.mega.io

Minio

Minio is an object storage server built for cloud application developers
and devops.

It is very easy to install and provides an S3 compatible server which
can be used by rclone.

To use it, install Minio following the instructions here.

When it configures itself Minio will print something like this

    Endpoint:  http://192.168.1.106:9000  http://172.23.0.1:9000
    AccessKey: USWUXHGYZQYFYFFIT3RE
    SecretKey: MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
    Region:    us-east-1
    SQS ARNs:  arn:minio:sqs:us-east-1:1:redis arn:minio:sqs:us-east-1:2:redis

    Browser Access:
       http://192.168.1.106:9000  http://172.23.0.1:9000

    Command-line Access: https://docs.minio.io/docs/minio-client-quickstart-guide
       $ mc config host add myminio http://192.168.1.106:9000 USWUXHGYZQYFYFFIT3RE MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03

    Object API (Amazon S3 compatible):
       Go:         https://docs.minio.io/docs/golang-client-quickstart-guide
       Java:       https://docs.minio.io/docs/java-client-quickstart-guide
       Python:     https://docs.minio.io/docs/python-client-quickstart-guide
       JavaScript: https://docs.minio.io/docs/javascript-client-quickstart-guide
       .NET:       https://docs.minio.io/docs/dotnet-client-quickstart-guide

    Drive Capacity: 26 GiB Free, 165 GiB Total

These details need to go into rclone config like this. Note that it is
important to put the region in as stated above.

    env_auth> 1
    access_key_id> USWUXHGYZQYFYFFIT3RE
    secret_access_key> MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
    region> us-east-1
    endpoint> http://192.168.1.106:9000
    location_constraint>
    server_side_encryption>

Which makes the config file look like this

    [minio]
    type = s3
    provider = Minio
    env_auth = false
    access_key_id = USWUXHGYZQYFYFFIT3RE
    secret_access_key = MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
    region = us-east-1
    endpoint = http://192.168.1.106:9000
    location_constraint =
    server_side_encryption =

So once set up, for example, to copy files into a bucket

    rclone copy /path/to/files minio:bucket

Netease NOS

For Netease NOS configure as per the configurator rclone config setting
the provider Netease. This will automatically set
force_path_style = false which is necessary for it to run properly.

Outscale

OUTSCALE Object Storage (OOS) is an enterprise-grade, S3-compatible
storage service provided by OUTSCALE, a brand of Dassault Systèmes. For
more information about OOS, see the official documentation.

Here is an example of an OOS configuration that you can paste into your
rclone configuration file:

    [outscale]
    type = s3
    provider = Outscale
    env_auth = false
    access_key_id = ABCDEFGHIJ0123456789
    secret_access_key = XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    region = eu-west-2
    endpoint = oos.eu-west-2.outscale.com
    acl = private

You can also run rclone config to go through the interactive setup
process:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> outscale

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
     X / Amazon S3 Compliant Storage Providers including AWS, ...Outscale, ...and others
       \ (s3)
    [snip]
    Storage> outscale

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / OUTSCALE Object Storage (OOS)
       \ (Outscale)
    [snip]
    provider> Outscale

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ABCDEFGHIJ0123456789

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

    Option region.
    Region where your bucket will be created and your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Paris, France
       \ (eu-west-2)
     2 / New Jersey, USA
       \ (us-east-2)
     3 / California, USA
       \ (us-west-1)
     4 / SecNumCloud, Paris, France
       \ (cloudgouv-eu-west-1)
     5 / Tokyo, Japan
       \ (ap-northeast-1)
    region> 1

    Option endpoint.
    Endpoint for S3 API.
    Required when using an S3 clone.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Outscale EU West 2 (Paris)
       \ (oos.eu-west-2.outscale.com)
     2 / Outscale US east 2 (New Jersey)
       \ (oos.us-east-2.outscale.com)
     3 / Outscale EU West 1 (California)
       \ (oos.us-west-1.outscale.com)
     4 / Outscale SecNumCloud (Paris)
       \ (oos.cloudgouv-eu-west-1.outscale.com)
     5 / Outscale AP Northeast 1 (Japan)
       \ (oos.ap-northeast-1.outscale.com)
    endpoint> 1

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
    [snip]
    acl> 1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Outscale
    - access_key_id: ABCDEFGHIJ0123456789
    - secret_access_key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    - endpoint: oos.eu-west-2.outscale.com
    Keep this "outscale" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

OVHcloud

OVHcloud Object Storage is an S3-compatible general-purpose object
storage platform available in all OVHcloud regions. To use the platform,
you will need an access key and secret key. To know more about it and
how to interact with the platform, take a look at the documentation.

Here is an example of making an OVHcloud Object Storage configuration
with rclone config:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> ovhcloud-rbx

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [...]
     XX / Amazon S3 Compliant Storage Providers including AWS, Alibaba, ArvanCloud, Ceph, ChinaMobile, Cloudflare, DigitalOcean, Dreamhost, GCS, HuaweiOBS, IBMCOS, IDrive, IONOS, LyveCloud, Leviia, Liara, Linode, Magalu, Minio, Netease, Outscale, OVHcloud, Petabox, RackCorp, Rclone, Scaleway, SeaweedFS, Selectel, Storj, Synology, TencentCOS, Wasabi, Qiniu and others
       \ (s3)
    [...]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [...]
    XX / OVHcloud Object Storage
       \ (OVHcloud)
    [...]
    provider> OVHcloud

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> my_access

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> my_secret

    Option region.
    Region where your bucket will be created and your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Gravelines, France
       \ (gra)
     2 / Roubaix, France
       \ (rbx)
     3 / Strasbourg, France
       \ (sbg)
     4 / Paris, France (3AZ)
       \ (eu-west-par)
     5 / Frankfurt, Germany
       \ (de)
     6 / London, United Kingdom
       \ (uk)
     7 / Warsaw, Poland
       \ (waw)
     8 / Beauharnois, Canada
       \ (bhs)
     9 / Toronto, Canada
       \ (ca-east-tor)
    10 / Singapore
       \ (sgp)
    11 / Sydney, Australia
       \ (ap-southeast-syd)
    12 / Mumbai, India
       \ (ap-south-mum)
    13 / Vint Hill, Virginia, USA
       \ (us-east-va)
    14 / Hillsboro, Oregon, USA
       \ (us-west-or)
    15 / Roubaix, France (Cold Archive)
       \ (rbx-archive)
    region> 2

    Option endpoint.
    Endpoint for OVHcloud Object Storage.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / OVHcloud Gravelines, France
       \ (s3.gra.io.cloud.ovh.net)
     2 / OVHcloud Roubaix, France
       \ (s3.rbx.io.cloud.ovh.net)
     3 / OVHcloud Strasbourg, France
       \ (s3.sbg.io.cloud.ovh.net)
     4 / OVHcloud Paris, France (3AZ)
       \ (s3.eu-west-par.io.cloud.ovh.net)
     5 / OVHcloud Frankfurt, Germany
       \ (s3.de.io.cloud.ovh.net)
     6 / OVHcloud London, United Kingdom
       \ (s3.uk.io.cloud.ovh.net)
     7 / OVHcloud Warsaw, Poland
       \ (s3.waw.io.cloud.ovh.net)
     8 / OVHcloud Beauharnois, Canada
       \ (s3.bhs.io.cloud.ovh.net)
     9 / OVHcloud Toronto, Canada
       \ (s3.ca-east-tor.io.cloud.ovh.net)
    10 / OVHcloud Singapore
       \ (s3.sgp.io.cloud.ovh.net)
    11 / OVHcloud Sydney, Australia
       \ (s3.ap-southeast-syd.io.cloud.ovh.net)
    12 / OVHcloud Mumbai, India
       \ (s3.ap-south-mum.io.cloud.ovh.net)
    13 / OVHcloud Vint Hill, Virginia, USA
       \ (s3.us-east-va.io.cloud.ovh.us)
    14 / OVHcloud Hillsboro, Oregon, USA
       \ (s3.us-west-or.io.cloud.ovh.us)
    15 / OVHcloud Roubaix, France (Cold Archive)
       \ (s3.rbx-archive.io.cloud.ovh.net)
    endpoint> 2

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
     2 | The AllUsers group gets READ access.
       \ (public-read)
       / Owner gets FULL_CONTROL.
     3 | The AllUsers group gets READ and WRITE access.
       | Granting this on a bucket is generally not recommended.
       \ (public-read-write)
       / Owner gets FULL_CONTROL.
     4 | The AuthenticatedUsers group gets READ access.
       \ (authenticated-read)
       / Object owner gets FULL_CONTROL.
     5 | Bucket owner gets READ access.
       | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-read)
       / Both the object owner and the bucket owner get FULL_CONTROL over the object.
     6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-full-control)
    acl> 1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: OVHcloud
    - access_key_id: my_access
    - secret_access_key: my_secret
    - region: rbx
    - endpoint: s3.rbx.io.cloud.ovh.net
    - acl: private
    Keep this "ovhcloud-rbx" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Your configuration file should now look like this:

    [ovhcloud-rbx]
    type = s3
    provider = OVHcloud
    access_key_id = my_access
    secret_access_key = my_secret
    region = rbx
    endpoint = s3.rbx.io.cloud.ovh.net
    acl = private

Petabox

Here is an example of making a Petabox configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    n/s> n

    Enter name for new remote.
    name> My Petabox Storage

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ "s3"
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Petabox Object Storage
       \ (Petabox)
    [snip]
    provider> Petabox

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> YOUR_ACCESS_KEY_ID

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> YOUR_SECRET_ACCESS_KEY

    Option region.
    Region where your bucket will be created and your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / US East (N. Virginia)
       \ (us-east-1)
     2 / Europe (Frankfurt)
       \ (eu-central-1)
     3 / Asia Pacific (Singapore)
       \ (ap-southeast-1)
     4 / Middle East (Bahrain)
       \ (me-south-1)
     5 / South America (São Paulo)
       \ (sa-east-1)
    region> 1

    Option endpoint.
    Endpoint for Petabox S3 Object Storage.
    Specify the endpoint from the same region.
    Choose a number from below, or type in your own value.
     1 / US East (N. Virginia)
       \ (s3.petabox.io)
     2 / US East (N. Virginia)
       \ (s3.us-east-1.petabox.io)
     3 / Europe (Frankfurt)
       \ (s3.eu-central-1.petabox.io)
     4 / Asia Pacific (Singapore)
       \ (s3.ap-southeast-1.petabox.io)
     5 / Middle East (Bahrain)
       \ (s3.me-south-1.petabox.io)
     6 / South America (São Paulo)
       \ (s3.sa-east-1.petabox.io)
    endpoint> 1

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
     2 | The AllUsers group gets READ access.
       \ (public-read)
       / Owner gets FULL_CONTROL.
     3 | The AllUsers group gets READ and WRITE access.
       | Granting this on a bucket is generally not recommended.
       \ (public-read-write)
       / Owner gets FULL_CONTROL.
     4 | The AuthenticatedUsers group gets READ access.
       \ (authenticated-read)
       / Object owner gets FULL_CONTROL.
     5 | Bucket owner gets READ access.
       | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-read)
       / Both the object owner and the bucket owner get FULL_CONTROL over the object.
     6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-full-control)
    acl> 1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> No

    Configuration complete.
    Options:
    - type: s3
    - provider: Petabox
    - access_key_id: YOUR_ACCESS_KEY_ID
    - secret_access_key: YOUR_SECRET_ACCESS_KEY
    - region: us-east-1
    - endpoint: s3.petabox.io
    Keep this "My Petabox Storage" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [My Petabox Storage]
    type = s3
    provider = Petabox
    access_key_id = YOUR_ACCESS_KEY_ID
    secret_access_key = YOUR_SECRET_ACCESS_KEY
    region = us-east-1
    endpoint = s3.petabox.io

Pure Storage FlashBlade

Pure Storage FlashBlade is a high performance S3-compatible object
store.

FlashBlade supports most modern S3 features including:

-   ListObjectsV2
-   Multipart uploads with AWS-compatible ETags
-   Advanced checksum algorithms (SHA256, CRC32, CRC32C) with trailer
    support (Purity//FB 4.4.2+)
-   Object versioning and lifecycle management
-   Virtual hosted-style requests (requires DNS configuration)

To configure rclone for Pure Storage FlashBlade:

First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> flashblade

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
     4 / Amazon S3 Compliant Storage Providers including AWS, Alibaba, ArvanCloud, Ceph, ChinaMobile, Cloudflare, DigitalOcean, Dreamhost, FlashBlade, GCS, HuaweiOBS, IBMCOS, IDrive, IONOS, LyveCloud, Leviia, Liara, Linode, Magalu, Minio, Netease, Outscale, Petabox, RackCorp, Rclone, Scaleway, SeaweedFS, Selectel, Storj, Synology, TencentCOS, Wasabi, Qiniu and others
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
     9 / Pure Storage FlashBlade Object Storage
       \ (FlashBlade)
    [snip]
    provider> FlashBlade

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY_ID

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY

    Option endpoint.
    Endpoint for S3 API.
    Required when using an S3 clone.
    Enter a value. Press Enter to leave empty.
    endpoint> https://s3.flashblade.example.com

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: FlashBlade
    - access_key_id: ACCESS_KEY_ID
    - secret_access_key: SECRET_ACCESS_KEY
    - endpoint: https://s3.flashblade.example.com
    Keep this "flashblade" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This results in the following configuration being stored in
~/.config/rclone/rclone.conf:

    [flashblade]
    type = s3
    provider = FlashBlade
    access_key_id = ACCESS_KEY_ID
    secret_access_key = SECRET_ACCESS_KEY
    endpoint = https://s3.flashblade.example.com

Note: The FlashBlade endpoint should be the S3 data VIP. For
virtual-hosted style requests, ensure proper DNS configuration:
subdomains of the endpoint hostname should resolve to a FlashBlade data
VIP. For example, if your endpoint is https://s3.flashblade.example.com,
then bucket-name.s3.flashblade.example.com should also resolve to the
data VIP.

Qiniu Cloud Object Storage (Kodo)

Qiniu Cloud Object Storage (Kodo), a completely independent-researched
core technology which is proven by repeated customer experience has
occupied absolute leading market leader position. Kodo can be widely
applied to mass data management.

To configure access to Qiniu Kodo, follow the steps below:

1.  Run rclone config and select n for a new remote.

        rclone config
        No remotes found, make a new one?
        n) New remote
        s) Set configuration password
        q) Quit config
        n/s/q> n

2.  Give the name of the configuration. For example, name it 'qiniu'.

        name> qiniu

3.  Select s3 storage.

        Choose a number from below, or type in your own value
        [snip]
        XX / Amazon S3 Compliant Storage Providers including AWS, ...
           \ (s3)
        [snip]
        Storage> s3

4.  Select Qiniu provider.

        Choose a number from below, or type in your own value
        1 / Amazon Web Services (AWS) S3
           \ "AWS"
        [snip]
        22 / Qiniu Object Storage (Kodo)
           \ (Qiniu)
        [snip]
        provider> Qiniu

5.  Enter your SecretId and SecretKey of Qiniu Kodo.

        Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
        Only applies if access_key_id and secret_access_key is blank.
        Enter a boolean value (true or false). Press Enter for the default ("false").
        Choose a number from below, or type in your own value
         1 / Enter AWS credentials in the next step
           \ "false"
         2 / Get AWS credentials from the environment (env vars or IAM)
           \ "true"
        env_auth> 1
        AWS Access Key ID.
        Leave blank for anonymous access or runtime credentials.
        Enter a string value. Press Enter for the default ("").
        access_key_id> AKIDxxxxxxxxxx
        AWS Secret Access Key (password)
        Leave blank for anonymous access or runtime credentials.
        Enter a string value. Press Enter for the default ("").
        secret_access_key> xxxxxxxxxxx

6.  Select endpoint for Qiniu Kodo. This is the standard endpoint for
    different region.

           / The default endpoint - a good choice if you are unsure.
         1 | East China Region 1.
           | Needs location constraint cn-east-1.
           \ (cn-east-1)
           / East China Region 2.
         2 | Needs location constraint cn-east-2.
           \ (cn-east-2)
           / North China Region 1.
         3 | Needs location constraint cn-north-1.
           \ (cn-north-1)
           / South China Region 1.
         4 | Needs location constraint cn-south-1.
           \ (cn-south-1)
           / North America Region.
         5 | Needs location constraint us-north-1.
           \ (us-north-1)
           / Southeast Asia Region 1.
         6 | Needs location constraint ap-southeast-1.
           \ (ap-southeast-1)
           / Northeast Asia Region 1.
         7 | Needs location constraint ap-northeast-1.
           \ (ap-northeast-1)
        [snip]
        endpoint> 1

        Option endpoint.
        Endpoint for Qiniu Object Storage.
        Choose a number from below, or type in your own value.
        Press Enter to leave empty.
         1 / East China Endpoint 1
           \ (s3-cn-east-1.qiniucs.com)
         2 / East China Endpoint 2
           \ (s3-cn-east-2.qiniucs.com)
         3 / North China Endpoint 1
           \ (s3-cn-north-1.qiniucs.com)
         4 / South China Endpoint 1
           \ (s3-cn-south-1.qiniucs.com)
         5 / North America Endpoint 1
           \ (s3-us-north-1.qiniucs.com)
         6 / Southeast Asia Endpoint 1
           \ (s3-ap-southeast-1.qiniucs.com)
         7 / Northeast Asia Endpoint 1
           \ (s3-ap-northeast-1.qiniucs.com)
        endpoint> 1

        Option location_constraint.
        Location constraint - must be set to match the Region.
        Used when creating buckets only.
        Choose a number from below, or type in your own value.
        Press Enter to leave empty.
         1 / East China Region 1
           \ (cn-east-1)
         2 / East China Region 2
           \ (cn-east-2)
         3 / North China Region 1
           \ (cn-north-1)
         4 / South China Region 1
           \ (cn-south-1)
         5 / North America Region 1
           \ (us-north-1)
         6 / Southeast Asia Region 1
           \ (ap-southeast-1)
         7 / Northeast Asia Region 1
           \ (ap-northeast-1)
        location_constraint> 1

7.  Choose acl and storage class.

        Note that this ACL is applied when server-side copying objects as S3
        doesn't copy the ACL from the source but rather writes a fresh one.
        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
           / Owner gets FULL_CONTROL.
         1 | No one else has access rights (default).
           \ (private)
           / Owner gets FULL_CONTROL.
         2 | The AllUsers group gets READ access.
           \ (public-read)
        [snip]
        acl> 2
        The storage class to use when storing new objects in Tencent COS.
        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
         1 / Standard storage class
           \ (STANDARD)
         2 / Infrequent access storage mode
           \ (LINE)
         3 / Archive storage mode
           \ (GLACIER)
         4 / Deep archive storage mode
           \ (DEEP_ARCHIVE)
        [snip]
        storage_class> 1
        Edit advanced config? (y/n)
        y) Yes
        n) No (default)
        y/n> n
        Remote config
        --------------------
        [qiniu]
        - type: s3
        - provider: Qiniu
        - access_key_id: xxx
        - secret_access_key: xxx
        - region: cn-east-1
        - endpoint: s3-cn-east-1.qiniucs.com
        - location_constraint: cn-east-1
        - acl: public-read
        - storage_class: STANDARD
        --------------------
        y) Yes this is OK (default)
        e) Edit this remote
        d) Delete this remote
        y/e/d> y
        Current remotes:

        Name                 Type
        ====                 ====
        qiniu                s3

FileLu S5

FileLu S5 Object Storage is an S3-compatible object storage system. It
provides multiple region options (Global, US-East, EU-Central,
AP-Southeast, and ME-Central) while using a single endpoint (s5lu.com).
FileLu S5 is designed for scalability, security, and simplicity, with
predictable pricing and no hidden charges for data transfers or API
requests.

Here is an example of making a configuration. First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> s5lu

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS,... FileLu, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / FileLu S5 Object Storage
       \ (FileLu)
    [snip]
    provider> FileLu

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth>

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> XXX

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> XXX

    Option endpoint.
    Endpoint for S3 API.
    Required when using an S3 clone.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Global
       \ (global)
     2 / North America (US-East)
       \ (us-east)
     3 / Europe (EU-Central)
       \ (eu-central)
     4 / Asia Pacific (AP-Southeast)
       \ (ap-southeast)
     5 / Middle East (ME-Central)
       \ (me-central)
    region> 1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: FileLu
    - access_key_id: XXX
    - secret_access_key: XXX
    - endpoint: s5lu.com
    Keep this "s5lu" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [s5lu]
    type = s3
    provider = FileLu
    access_key_id = XXX
    secret_access_key = XXX
    endpoint = s5lu.com

Rabata

Rabata is an S3-compatible secure cloud storage service that offers
flat, transparent pricing (no API request fees) while supporting
standard S3 APIs. It is suitable for backup, application storage,media
workflows, and archive use cases.

Server side copy is not implemented with Rabata, also meaning
modification time of objects cannot be updated.

Rclone config:

    rclone config
    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> Rabata

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Rabata Cloud Storage
       \ (Rabata)
    [snip]
    provider> Rabata

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY_ID

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY

    Option region.
    Region where your bucket will be created and your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / US East (N. Virginia)
       \ (us-east-1)
     2 / EU (Ireland)
       \ (eu-west-1)
     3 / EU (London)
       \ (eu-west-2)
    region> 3

    Option endpoint.
    Endpoint for Rabata Object Storage.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / US East (N. Virginia)
       \ (s3.us-east-1.rabata.io)
     2 / EU West (Ireland)
       \ (s3.eu-west-1.rabata.io)
     3 / EU West (London)
       \ (s3.eu-west-2.rabata.io)
    endpoint> 3

    Option location_constraint.
    location where your bucket will be created and your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / US East (N. Virginia)
       \ (us-east-1)
     2 / EU (Ireland)
       \ (eu-west-1)
     3 / EU (London)
       \ (eu-west-2)
    location_constraint> 3

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Rabata
    - access_key_id: ACCESS_KEY_ID
    - secret_access_key: SECRET_ACCESS_KEY
    - region: eu-west-2
    - endpoint: s3.eu-west-2.rabata.io
    - location_constraint: eu-west-2
    Keep this "rabata" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

    Current remotes:

    Name                 Type
    ====                 ====
    rabata               s3

RackCorp

RackCorp Object Storage is an S3 compatible object storage platform from
your friendly cloud provider RackCorp. The service is fast, reliable,
well priced and located in many strategic locations unserviced by
others, to ensure you can maintain data sovereignty.

Before you can use RackCorp Object Storage, you'll need to sign up for
an account on our portal. Next you can create an access key, a
secret key and buckets, in your location of choice with ease. These
details are required for the next steps of configuration, when
rclone config asks for your access_key_id and secret_access_key.

Your config should end up looking a bit like this:

    [RCS3-demo-config]
    type = s3
    provider = RackCorp
    env_auth = true
    access_key_id = YOURACCESSKEY
    secret_access_key = YOURSECRETACCESSKEY
    region = au-nsw
    endpoint = s3.rackcorp.com
    location_constraint = au-nsw

Rclone Serve S3

Rclone can serve any remote over the S3 protocol. For details see the
rclone serve s3 documentation.

For example, to serve remote:path over s3, run the server like this:

    rclone serve s3 --auth-key ACCESS_KEY_ID,SECRET_ACCESS_KEY remote:path

This will be compatible with an rclone remote which is defined like
this:

    [serves3]
    type = s3
    provider = Rclone
    endpoint = http://127.0.0.1:8080/
    access_key_id = ACCESS_KEY_ID
    secret_access_key = SECRET_ACCESS_KEY
    use_multipart_uploads = false

Note that setting use_multipart_uploads = false is to work around a bug
which will be fixed in due course.

Scaleway

Scaleway The Object Storage platform allows you to store anything from
backups, logs and web assets to documents and photos. Files can be
dropped from the Scaleway console or transferred through our API and CLI
or using any S3-compatible tool.

Scaleway provides an S3 interface which can be configured for use with
rclone like this:

    [scaleway]
    type = s3
    provider = Scaleway
    env_auth = false
    endpoint = s3.nl-ams.scw.cloud
    access_key_id = SCWXXXXXXXXXXXXXX
    secret_access_key = 1111111-2222-3333-44444-55555555555555
    region = nl-ams
    location_constraint = nl-ams
    acl = private
    upload_cutoff = 5M
    chunk_size = 5M
    copy_cutoff = 5M

Scaleway Glacier is the low-cost S3 Glacier alternative from Scaleway
and it works the same way as on S3 by accepting the "GLACIER"
storage_class. So you can configure your remote with the
storage_class = GLACIER option to upload directly to Scaleway Glacier.
Don't forget that in this state you can't read files back after, you
will need to restore them to "STANDARD" storage_class first before being
able to read them (see "restore" section above)

Seagate Lyve Cloud

Seagate Lyve Cloud is an S3 compatible object storage platform from
Seagate intended for enterprise use.

Here is a config run through for a remote called remote - you may choose
a different name of course. Note that to create an access key and secret
key you will need to create a service account first.

    $ rclone config
    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote

Choose s3 backend

    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
    [snip]
    Storage> s3

Choose LyveCloud as S3 provider

    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Seagate Lyve Cloud
       \ (LyveCloud)
    [snip]
    provider> LyveCloud

Take the default (just press enter) to enter access key and secret in
the config file.

    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth>

    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> XXX

    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> YYY

Leave region blank

    Region to connect to.
    Leave blank if you are using an S3 clone and you don't have a region.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Use this if unsure.
     1 | Will use v4 signatures and an empty region.
       \ ()
       / Use this only if v4 signatures don't work.
     2 | E.g. pre Jewel/v10 CEPH.
       \ (other-v2-signature)
    region>

Enter your Lyve Cloud endpoint. This field cannot be kept empty.

    Endpoint for Lyve Cloud S3 API.
    Required when using an S3 clone.
    Please type in your LyveCloud endpoint.
    Examples:
    - s3.us-west-1.{account_name}.lyve.seagate.com (US West 1 - California)
    - s3.eu-west-1.{account_name}.lyve.seagate.com (US West 1 - Ireland)
    Enter a value.
    endpoint> s3.us-west-1.global.lyve.seagate.com

Leave location constraint blank

    Location constraint - must be set to match the Region.
    Leave blank if not sure. Used when creating buckets only.
    Enter a value. Press Enter to leave empty.
    location_constraint>

Choose default ACL (private).

    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
    [snip]
    acl>

And the config file should end up looking like this:

    [remote]
    type = s3
    provider = LyveCloud
    access_key_id = XXX
    secret_access_key = YYY
    endpoint = s3.us-east-1.lyvecloud.seagate.com

SeaweedFS

SeaweedFS is a distributed storage system for blobs, objects, files, and
data lake, with O(1) disk seek and a scalable file metadata store. It
has an S3 compatible object storage interface. SeaweedFS can also act as
a gateway to remote S3 compatible object store to cache data and
metadata with asynchronous write back, for fast local speed and minimize
access cost.

Assuming the SeaweedFS are configured with weed shell as such:

    > s3.bucket.create -name foo
    > s3.configure -access_key=any -secret_key=any -buckets=foo -user=me -actions=Read,Write,List,Tagging,Admin -apply
    {
      "identities": [
        {
          "name": "me",
          "credentials": [
            {
              "accessKey": "any",
              "secretKey": "any"
            }
          ],
          "actions": [
            "Read:foo",
            "Write:foo",
            "List:foo",
            "Tagging:foo",
            "Admin:foo"
          ]
        }
      ]
    }

To use rclone with SeaweedFS, above configuration should end up with
something like this in your config:

    [seaweedfs_s3]
    type = s3
    provider = SeaweedFS
    access_key_id = any
    secret_access_key = any
    endpoint = localhost:8333

So once set up, for example to copy files into a bucket

    rclone copy /path/to/files seaweedfs_s3:foo

Selectel

Selectel Cloud Storage is an S3 compatible storage system which features
triple redundancy storage, automatic scaling, high availability and a
comprehensive IAM system.

Selectel have a section on their website for configuring rclone which
shows how to make the right API keys.

From rclone v1.69 Selectel is a supported operator - please choose the
Selectel provider type.

Note that you should use "vHosted" access for the buckets (which is the
recommended default), not "path style".

You can use rclone config to make a new provider like this

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> selectel

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including ..., Selectel, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Selectel Object Storage
       \ (Selectel)
    [snip]
    provider> Selectel

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY

    Option region.
    Region where your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / St. Petersburg
       \ (ru-1)
    region> 1

    Option endpoint.
    Endpoint for Selectel Object Storage.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Saint Petersburg
       \ (s3.ru-1.storage.selcloud.ru)
    endpoint> 1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Selectel
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_ACCESS_KEY
    - region: ru-1
    - endpoint: s3.ru-1.storage.selcloud.ru
    Keep this "selectel" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

And your config should end up looking like this:

    [selectel]
    type = s3
    provider = Selectel
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_ACCESS_KEY
    region = ru-1
    endpoint = s3.ru-1.storage.selcloud.ru

Servercore

Servercore Object Storage is an S3 compatible object storage system that
provides scalable and secure storage solutions for businesses of all
sizes.

rclone config example:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> servercore

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including ..., Servercore, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / Servercore Object Storage
       \ (Servercore)
    [snip]
    provider> Servercore

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY

    Option region.
    Region where your is data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / St. Petersburg
       \ (ru-1)
     2 / Moscow
       \ (gis-1)
     3 / Moscow
       \ (ru-7)
     4 / Tashkent, Uzbekistan
       \ (uz-2)
     5 / Almaty, Kazakhstan
       \ (kz-1)
    region> 1

    Option endpoint.
    Endpoint for Servercore Object Storage.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Saint Petersburg
       \ (s3.ru-1.storage.selcloud.ru)
     2 / Moscow
       \ (s3.gis-1.storage.selcloud.ru)
     3 / Moscow
       \ (s3.ru-7.storage.selcloud.ru)
     4 / Tashkent, Uzbekistan
       \ (s3.uz-2.srvstorage.uz)
     5 / Almaty, Kazakhstan
       \ (s3.kz-1.srvstorage.kz)
    endpoint> 1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: Servercore
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_ACCESS_KEY
    - region: ru-1
    - endpoint: s3.ru-1.storage.selcloud.ru
    Keep this "servercore" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Spectra Logic

Spectra Logic is an on-prem S3-compatible object storage gateway that
exposes local object storage and policy-tiers data to Spectra tape and
public clouds under a single namespace for backup and archiving.

The S3 compatible gateway is configured using rclone config with a type
of s3 and with a provider name of SpectraLogic. Here is an example run
of the configurator.

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> spectralogic

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Amazon S3 Compliant Storage Providers including ..., SpectraLogic, ...
       \ (s3)
    [snip]
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
    [snip]
    XX / SpectraLogic BlackPearl
       \ (SpectraLogic)
    [snip]
    provider> SpectraLogic

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> SECRET_ACCESS_KEY

    Option endpoint.
    Endpoint for S3 API.
    Required when using an S3 clone.
    Enter a value. Press Enter to leave empty.
    endpoint> https://bp.example.com

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: s3
    - provider: SpectraLogic
    - access_key_id: ACCESS_KEY
    - secret_access_key: SECRET_ACCESS_KEY
    - endpoint: https://bp.example.com
    Keep this "spectratest" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

And your config should end up looking like this:

    [spectratest]
    type = s3
    provider = SpectraLogic
    access_key_id = ACCESS_KEY
    secret_access_key = SECRET_ACCESS_KEY
    endpoint = https://bp.example.com

Storj

Storj is a decentralized cloud storage which can be used through its
native protocol or an S3 compatible gateway.

The S3 compatible gateway is configured using rclone config with a type
of s3 and with a provider name of Storj. Here is an example run of the
configurator.

    Type of storage to configure.
    Storage> s3
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 1
    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> XXXX (as shown when creating the access grant)
    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> XXXX (as shown when creating the access grant)
    Option endpoint.
    Endpoint of the Shared Gateway.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / EU1 Shared Gateway
       \ (gateway.eu1.storjshare.io)
     2 / US1 Shared Gateway
       \ (gateway.us1.storjshare.io)
     3 / Asia-Pacific Shared Gateway
       \ (gateway.ap1.storjshare.io)
    endpoint> 1 (as shown when creating the access grant)
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

Note that s3 credentials are generated when you create an access grant.

Backend quirks

-   --chunk-size is forced to be 64 MiB or greater. This will use more
    memory than the default of 5 MiB.
-   Server side copy is disabled as it isn't currently supported in the
    gateway.
-   GetTier and SetTier are not supported.

Backend bugs

Due to issue #39 uploading multipart files via the S3 gateway causes
them to lose their metadata. For rclone's purpose this means that the
modification time is not stored, nor is any MD5SUM (if one is available
from the source).

This has the following consequences:

-   Using rclone rcat will fail as the metadata doesn't match after
    upload
-   Uploading files with rclone mount will fail for the same reason
    -   This can worked around by using --vfs-cache-mode writes or
        --vfs-cache-mode full or setting --s3-upload-cutoff large
-   Files uploaded via a multipart upload won't have their modtimes
    -   This will mean that rclone sync will likely keep trying to
        upload files bigger than --s3-upload-cutoff
    -   This can be worked around with --checksum or --size-only or
        setting --s3-upload-cutoff large
    -   The maximum value for --s3-upload-cutoff is 5GiB though

One general purpose workaround is to set --s3-upload-cutoff 5G. This
means that rclone will upload files smaller than 5GiB as single parts.
Note that this can be set in the config file with upload_cutoff = 5G or
configured in the advanced settings. If you regularly transfer files
larger than 5G then using --checksum or --size-only in rclone sync is
the recommended workaround.

Comparison with the native protocol

Use the the native protocol to take advantage of client-side encryption
as well as to achieve the best possible download performance. Uploads
will be erasure-coded locally, thus a 1gb upload will result in 2.68gb
of data being uploaded to storage nodes across the network.

Use this backend and the S3 compatible Hosted Gateway to increase upload
performance and reduce the load on your systems and network. Uploads
will be encrypted and erasure-coded server-side, thus a 1GB upload will
result in only in 1GB of data being uploaded to storage nodes across the
network.

For more detailed comparison please check the documentation of the storj
backend.

Synology C2 Object Storage

Synology C2 Object Storage provides a secure, S3-compatible, and
cost-effective cloud storage solution without API request, download
fees, and deletion penalty.

The S3 compatible gateway is configured using rclone config with a type
of s3 and with a provider name of Synology. Here is an example run of
the configurator.

First run:

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config

    n/s/q> n

    Enter name for new remote.1
    name> syno

    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value

    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ "s3"

    Storage> s3

    Choose your S3 provider.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     24 / Synology C2 Object Storage
       \ (Synology)

    provider> Synology

    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Enter a boolean value (true or false). Press Enter for the default ("false").
    Choose a number from below, or type in your own value
     1 / Enter AWS credentials in the next step
       \ "false"
     2 / Get AWS credentials from the environment (env vars or IAM)
       \ "true"

    env_auth> 1

    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a string value. Press Enter for the default ("").

    access_key_id> accesskeyid

    AWS Secret Access Key (password)
    Leave blank for anonymous access or runtime credentials.
    Enter a string value. Press Enter for the default ("").

    secret_access_key> secretaccesskey

    Region where your data stored.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Europe Region 1
       \ (eu-001)
     2 / Europe Region 2
       \ (eu-002)
     3 / US Region 1
       \ (us-001)
     4 / US Region 2
       \ (us-002)
     5 / Asia (Taiwan)
       \ (tw-001)

    region > 1

    Option endpoint.
    Endpoint for Synology C2 Object Storage API.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / EU Endpoint 1
       \ (eu-001.s3.synologyc2.net)
     2 / US Endpoint 1
       \ (us-001.s3.synologyc2.net)
     3 / TW Endpoint 1
       \ (tw-001.s3.synologyc2.net)

    endpoint> 1

    Option location_constraint.
    Location constraint - must be set to match the Region.
    Leave blank if not sure. Used when creating buckets only.
    Enter a value. Press Enter to leave empty.
    location_constraint>

    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> y

    Option no_check_bucket.
    If set, don't attempt to check the bucket exists or create it.
    This can be useful when trying to minimise the number of transactions
    rclone does if you know the bucket exists already.
    It can also be needed if the user you are using does not have bucket
    creation permissions. Before v1.52.0 this would have passed silently
    due to a bug.
    Enter a boolean value (true or false). Press Enter for the default (true).

    no_check_bucket> true

    Configuration complete.
    Options:
    - type: s3
    - provider: Synology
    - region: eu-001
    - endpoint: eu-001.s3.synologyc2.net
    - no_check_bucket: true
    Keep this "syno" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote

    y/e/d> y

Tencent COS

Tencent Cloud Object Storage (COS) is a distributed storage service
offered by Tencent Cloud for unstructured data. It is secure, stable,
massive, convenient, low-delay and low-cost.

To configure access to Tencent COS, follow the steps below:

1.  Run rclone config and select n for a new remote.

        rclone config
        No remotes found, make a new one?
        n) New remote
        s) Set configuration password
        q) Quit config
        n/s/q> n

2.  Give the name of the configuration. For example, name it 'cos'.

        name> cos

3.  Select s3 storage.

        Choose a number from below, or type in your own value
        [snip]
        XX / Amazon S3 Compliant Storage Providers including AWS, ...
           \ "s3"
        [snip]
        Storage> s3

4.  Select TencentCOS provider.

        Choose a number from below, or type in your own value
        1 / Amazon Web Services (AWS) S3
           \ "AWS"
        [snip]
        11 / Tencent Cloud Object Storage (COS)
           \ "TencentCOS"
        [snip]
        provider> TencentCOS

5.  Enter your SecretId and SecretKey of Tencent Cloud.

        Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
        Only applies if access_key_id and secret_access_key is blank.
        Enter a boolean value (true or false). Press Enter for the default ("false").
        Choose a number from below, or type in your own value
         1 / Enter AWS credentials in the next step
           \ "false"
         2 / Get AWS credentials from the environment (env vars or IAM)
           \ "true"
        env_auth> 1
        AWS Access Key ID.
        Leave blank for anonymous access or runtime credentials.
        Enter a string value. Press Enter for the default ("").
        access_key_id> AKIDxxxxxxxxxx
        AWS Secret Access Key (password)
        Leave blank for anonymous access or runtime credentials.
        Enter a string value. Press Enter for the default ("").
        secret_access_key> xxxxxxxxxxx

6.  Select endpoint for Tencent COS. This is the standard endpoint for
    different region.

         1 / Beijing Region.
           \ "cos.ap-beijing.myqcloud.com"
         2 / Nanjing Region.
           \ "cos.ap-nanjing.myqcloud.com"
         3 / Shanghai Region.
           \ "cos.ap-shanghai.myqcloud.com"
         4 / Guangzhou Region.
           \ "cos.ap-guangzhou.myqcloud.com"
        [snip]
        endpoint> 4

7.  Choose acl and storage class.

        Note that this ACL is applied when server-side copying objects as S3
        doesn't copy the ACL from the source but rather writes a fresh one.
        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
         1 / Owner gets Full_CONTROL. No one else has access rights (default).
           \ "default"
        [snip]
        acl> 1
        The storage class to use when storing new objects in Tencent COS.
        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
         1 / Default
           \ ""
        [snip]
        storage_class> 1
        Edit advanced config? (y/n)
        y) Yes
        n) No (default)
        y/n> n
        Remote config
        --------------------
        [cos]
        type = s3
        provider = TencentCOS
        env_auth = false
        access_key_id = xxx
        secret_access_key = xxx
        endpoint = cos.ap-guangzhou.myqcloud.com
        acl = default
        --------------------
        y) Yes this is OK (default)
        e) Edit this remote
        d) Delete this remote
        y/e/d> y
        Current remotes:

        Name                 Type
        ====                 ====
        cos                  s3

Tencent COS Global Acceleration Endpoint

When using the Global Acceleration Endpoint
(cos.accelerate.myqcloud.com), rclone automatically sets
no_check_bucket = true because this acceleration endpoint does not
support the CreateBucket call which is used for ensuring a bucket's
existence by rclone. Global Acceleration is a per-bucket feature, so you
should first create the bucket in one physical region, then enable it in
the Tencent Cloud console.

US3

US3 Object Storage is a service that provides cloud storage for
unstructured files for internet applications.

To configure access to US3, follow the steps below: 1. First run:
console     rclone config     No remotes found, make a new one?     n) New remote     s) Set configuration password     q) Quit config     n/s/q> n
2. Give the name of the configuration. For example, name it 'US3'.

    name> US3

3.  Select s3 storage.

        Choose a number from below, or type in your own value
        [snip]
        XX / Amazon S3 Compliant Storage Providers including AWS, ...
           \ "s3"
        [snip]
        Storage> s3

4.  Select US3 provider.

         Choose a number from below, or type in your own value.
         XX / Amazon Web Services (AWS) S3
            \ (AWS)
         [snip]
         XX / UCloud Object Storage (US3)
            \ (US3)
         [snip]
         provider> US3

5.  Enter your SecretId and SecretKey of US3.

        Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
        Only applies if access_key_id and secret_access_key is blank.
        Choose a number from below, or type in your own boolean value (true or false).
        Press Enter for the default (false).
        Choose a number from below, or type in your own value
         1 / Enter AWS credentials in the next step
           \ "false"
         2 / Get AWS credentials from the environment (env vars or IAM)
           \ "true"
        env_auth> 1
        Option access_key_id.
        AWS Access Key ID.
        Leave blank for anonymous access or runtime credentials.
        Enter a value. Press Enter to leave empty.
        access_key_id> AKIDxxxxxxxxxx
        AWS Secret Access Key (password)
        Leave blank for anonymous access or runtime credentials.
        Enter a string value. Press Enter for the default ("").
        secret_access_key> xxxxxxxxxxx

6.  Select endpoint.

         Option endpoint.
         Endpoint for S3 API.
         Required when using an S3 clone.
         Choose a number from below, or type in your own value.
         Press Enter to leave empty.
         1 / North China (Beijing 2).
           \ "s3-cn-bj.ufileos.com"
         2 / North China (Ulanqab).
           \ "s3-cn-wlcb.ufileos.com"
         3 / Shanghai.
           \ "s3-cn-sh2.ufileos.com"
         4 / South China (Guangzhou).
           \ "s3-cn-gd.ufileos.com"
        [snip]
        endpoint> 1

7.  Choose acl and storage class.

        Option acl.
        Canned ACL used when creating buckets and storing or copying objects.
        This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
        For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
        Note that this ACL is applied when server-side copying objects as S3
        doesn't copy the ACL from the source but rather writes a fresh one.
        If the acl is an empty string then no X-Amz-Acl: header is added and
        the default (private) will be used.
        Choose a number from below, or type in your own value.
        Press Enter to leave empty.
          / Owner gets FULL_CONTROL.
        1 | No one else has access rights (default).
          \ (private)
          / Owner gets FULL_CONTROL.
        2 | The AllUsers group gets READ access.
          \ (public-read)
        acl> 1

        The storage class to use when storing new objects in US3.
        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
         1 / Default
           \ ""
        [snip]
        storage_class> 1
        Edit advanced config? (y/n)
        y) Yes
        n) No (default)
        y/n> n

         Configuration complete. 
         Options:
         - type: s3
         - provider: US3
         - access_key_id: xx
         - secret_access_key: xx
         - endpoint: s3-cn-bj.ufileos.com
         - acl: private

         Keep this "US3" remote?
         y) Yes this is OK (default)
         e) Edit this remote
         d) Delete this remote
         y/e/d> y
         Current remotes:

         Name                 Type
         ====                 ====
         US3                  s3

Wasabi

Wasabi is a cloud-based object storage service for a broad range of
applications and use cases. Wasabi is designed for individuals and
organizations that require a high-performance, reliable, and secure data
storage infrastructure at minimal cost.

Wasabi provides an S3 interface which can be configured for use with
rclone like this.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    n/s> n
    name> wasabi
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Amazon S3 (also Dreamhost, Ceph, ChinaMobile, ArvanCloud, Minio, Liara)
       \ "s3"
    [snip]
    Storage> s3
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own value
     1 / Enter AWS credentials in the next step
       \ "false"
     2 / Get AWS credentials from the environment (env vars or IAM)
       \ "true"
    env_auth> 1
    AWS Access Key ID - leave blank for anonymous access or runtime credentials.
    access_key_id> YOURACCESSKEY
    AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
    secret_access_key> YOURSECRETACCESSKEY
    Region to connect to.
    Choose a number from below, or type in your own value
       / The default endpoint - a good choice if you are unsure.
     1 | US Region, Northern Virginia, or Pacific Northwest.
       | Leave location constraint empty.
       \ "us-east-1"
    [snip]
    region> us-east-1
    Endpoint for S3 API.
    Leave blank if using AWS to use the default endpoint for the region.
    Specify if using an S3 clone such as Ceph.
    endpoint> s3.wasabisys.com
    Location constraint - must be set to match the Region. Used when creating buckets only.
    Choose a number from below, or type in your own value
     1 / Empty for US Region, Northern Virginia, or Pacific Northwest.
       \ ""
    [snip]
    location_constraint>
    Canned ACL used when creating buckets and/or storing objects in S3.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Choose a number from below, or type in your own value
     1 / Owner gets FULL_CONTROL. No one else has access rights (default).
       \ "private"
    [snip]
    acl>
    The server-side encryption algorithm used when storing this object in S3.
    Choose a number from below, or type in your own value
     1 / None
       \ ""
     2 / AES256
       \ "AES256"
    server_side_encryption>
    The storage class to use when storing objects in S3.
    Choose a number from below, or type in your own value
     1 / Default
       \ ""
     2 / Standard storage class
       \ "STANDARD"
     3 / Reduced redundancy storage class
       \ "REDUCED_REDUNDANCY"
     4 / Standard Infrequent Access storage class
       \ "STANDARD_IA"
    storage_class>
    Remote config
    --------------------
    [wasabi]
    env_auth = false
    access_key_id = YOURACCESSKEY
    secret_access_key = YOURSECRETACCESSKEY
    region = us-east-1
    endpoint = s3.wasabisys.com
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [wasabi]
    type = s3
    provider = Wasabi
    env_auth = false
    access_key_id = YOURACCESSKEY
    secret_access_key = YOURSECRETACCESSKEY
    region =
    endpoint = s3.wasabisys.com
    location_constraint =
    acl =
    server_side_encryption =
    storage_class =

Zadara Object Storage

Zadara Object Storage is a fully-managed, enterprise-grade,
S3-compatible storage solution that provides scalable, multi-tenant
object storage with flexible deployment options (on-prem, hybrid, or
cloud).

Zadara Object Storage can be configured using rclone config with s3 as
the type and Zadara as the provider name. Here is an example run of the
configurator.

Authentication and endpoint information, including the region field,
should be fetched from Zadara’s Object Storage management interface

To configure access to Zadara Object Storage, first run:

    rclone config

    This will guide you through an interactive setup process:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    n/s> n

    Enter name for new remote.
    name> Zadara-Object-Storage

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
     
     XX / Amazon S3 Compliant Storage Providers including AWS ...
       \ (s3)

    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     
    XX / Zadara Object Storage
       \ (Zadara)

    provider> Zadara

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth> 

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> S3_ACCESS_KEY

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> S3_SECRET_KEY

    Option region.
    Region to connect to.
    Leave blank if you are using an S3 clone and you don't have a region.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / The default region.
     1 | Leave location constraint empty.
       \ (us-east-1)
    region> 

    Option endpoint.
    Endpoint for S3 API.
    Required when using an S3 clone.
    Enter a value. Press Enter to leave empty.
    endpoint> https://vsa-00000001-public-zadara-cloud-01.zadarazios.com

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> 

    Configuration complete.
    Options:
    - type: s3
    - provider: Zadara
    - access_key_id: S3_ACCESS_KEY
    - secret_access_key: S3_SECRET_KEY
    - endpoint: https://vsa-00000001-public-zadara-cloud-01.zadarazios.com
    Keep this "Zadara-Object-Storage" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This will leave the config file looking like this.

    [Zadara-Object-Storage]
    type = s3
    provider = Zadara
    access_key_id = S3_ACCESS_KEY
    secret_access_key = S3_SECRET_KEY
    endpoint = https://vsa-00000001-public-zadara-cloud-01.zadarazios.com

Zata Object Storage

Zata Object Storage provides a secure, S3-compatible cloud storage
solution designed for scalability and performance, ideal for a variety
of data storage needs.

First run:

    rclone config

    This will guide you through an interactive setup process:

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> n

    Enter name for new remote.
    name> my zata storage 

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
     
    XX / Amazon S3 Compliant Storage Providers including AWS, ...
       \ (s3)
     
    Storage> s3

    Option provider.
    Choose your S3 provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     
    XX / Zata (S3 compatible Gateway)
       \ (Zata)

    provider> Zata

    Option env_auth.
    Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
    Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own boolean value (true or false).
    Press Enter for the default (false).
     1 / Enter AWS credentials in the next step.
       \ (false)
     2 / Get AWS credentials from the environment (env vars or IAM).
       \ (true)
    env_auth>

    Option access_key_id.
    AWS Access Key ID.
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    access_key_id> "your key"

    Option secret_access_key.
    AWS Secret Access Key (password).
    Leave blank for anonymous access or runtime credentials.
    Enter a value. Press Enter to leave empty.
    secret_access_key> "your secret key"

    Option region.
    Region where you can connect with.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Indore, Madhya Pradesh, India
       \ (us-east-1)
    region> 1

    Option endpoint.
    Endpoint for Zata Object Storage.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / South Asia Endpoint
       \ (idr01.zata.ai)
    endpoint> 1

    Option location_constraint.
    Location constraint - must be set to match the Region.
    Leave blank if not sure. Used when creating buckets only.
    Enter a value. Press Enter to leave empty.
    location_constraint>

    Option acl.
    Canned ACL used when creating buckets and storing or copying objects.
    This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
    For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
    Note that this ACL is applied when server-side copying objects as S3
    doesn't copy the ACL from the source but rather writes a fresh one.
    If the acl is an empty string then no X-Amz-Acl: header is added and
    the default (private) will be used.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
       / Owner gets FULL_CONTROL.
     1 | No one else has access rights (default).
       \ (private)
       / Owner gets FULL_CONTROL.
     2 | The AllUsers group gets READ access.
       \ (public-read)
       / Owner gets FULL_CONTROL.
     3 | The AllUsers group gets READ and WRITE access.
       | Granting this on a bucket is generally not recommended.
       \ (public-read-write)
       / Owner gets FULL_CONTROL.
     4 | The AuthenticatedUsers group gets READ access.
       \ (authenticated-read)
       / Object owner gets FULL_CONTROL.
     5 | Bucket owner gets READ access.
       | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-read)
       / Both the object owner and the bucket owner get FULL_CONTROL over the object.
     6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
       \ (bucket-owner-full-control)
    acl>

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n>

    Configuration complete.
    Options:
    - type: s3
    - provider: Zata
    - access_key_id: xxx
    - secret_access_key: xxx
    - region: us-east-1
    - endpoint: idr01.zata.ai
    Keep this "my zata storage" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d>

This will leave the config file looking like this.

    [my zata storage]
    type = s3
    provider = Zata
    access_key_id = xxx
    secret_access_key = xxx
    region = us-east-1
    endpoint = idr01.zata.ai

Memory usage

The most common cause of rclone using lots of memory is a single
directory with millions of files in. Despite s3 not really having the
concepts of directories, rclone does the sync on a directory by
directory basis to be compatible with normal filing systems.

Rclone loads each directory into memory as rclone objects. Each rclone
object takes 0.5k-1k of memory, so approximately 1GB per 1,000,000
files, and the sync for that directory does not begin until it is
entirely loaded in memory. So the sync can take a long time to start for
large directories.

To sync a directory with 100,000,000 files in you would need
approximately 100 GB of memory. At some point the amount of memory
becomes difficult to provide so there is a workaround for this which
involves a bit of scripting.

At some point rclone will gain a sync mode which is effectively this
workaround but built in to rclone.

Limitations

rclone about is not supported by the S3 backend. Backends without this
capability cannot determine free space for an rclone mount or use policy
mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Archive

The Archive backend allows read only access to the content of archive
files on cloud storage without downloading the complete archive. This
means you could mount a large archive file and use only the parts of it
your application requires, rather than having to extract it.

The archive files are recognised by their extension.

  Archive    Extension
  ---------- -----------
  Zip        .zip
  Squashfs   .sqfs

The supported archive file types are cloud friendly - a single file can
be found and downloaded without downloading the whole archive.

If you just want to create, list or extract archives and don't want to
mount them then you may find the rclone archive commands more
convenient.

-   rclone archive create
-   rclone archive list
-   rclone archive extract

These commands supports a wider range of non cloud friendly archives
(but not squashfs) but can't be used for rclone mount or any other
rclone commands (eg rclone check).

Configuration

This backend is best used without configuration.

Use it by putting the string :archive: in front of another remote, say
remote:dir to make :archive:remote:dir.

Any archives in remote:dir will become directories and any files may be
read out of them individually.

For example

    $ rclone lsf s3:rclone/dir
    100files.sqfs
    100files.zip

Note that 100files.zip and 100files.sqfs are now directories:

    $ rclone lsf :archive:s3:rclone/dir
    100files.sqfs/
    100files.zip/

Which we can look inside:

    $ rclone lsf :archive:s3:rclone/dir/100files.zip/
    cofofiy5jun
    gigi
    hevupaz5z
    kacak/
    kozemof/
    lamapaq4
    qejahen
    quhenen2rey
    soboves8
    vibat/
    wose
    xade
    zilupot

Files not in an archive can be read and written as normal. Files in an
archive can only be read.

The archive backend can also be used in a configuration file. Use the
remote variable to point to the destination of the archive.

    [remote]
    type = archive
    remote = s3:rclone/dir/100files.zip

Gives

    $ rclone lsf remote:
    cofofiy5jun
    gigi
    hevupaz5z
    kacak/
    ...

Modification times

Modification times are preserved with an accuracy depending on the
archive type.

    $ rclone lsl --max-depth 1 :archive:s3:rclone/dir/100files.zip
           12 2025-10-27 14:39:20.000000000 cofofiy5jun
           81 2025-10-27 14:39:20.000000000 gigi
           58 2025-10-27 14:39:20.000000000 hevupaz5z
            6 2025-10-27 14:39:20.000000000 lamapaq4
           43 2025-10-27 14:39:20.000000000 qejahen
           66 2025-10-27 14:39:20.000000000 quhenen2rey
           95 2025-10-27 14:39:20.000000000 soboves8
           71 2025-10-27 14:39:20.000000000 wose
           76 2025-10-27 14:39:20.000000000 xade
           15 2025-10-27 14:39:20.000000000 zilupot

For zip and squashfs files this is 1s.

Hashes

Which hash is supported depends on the archive type. Zip files use
CRC32, Squashfs don't support any hashes. For example:

    $ rclone hashsum crc32 :archive:s3:rclone/dir/100files.zip/
    b2288554  cofofiy5jun
    a87e62b6  wose
    f90f630b  xade
    c7d0ef29  gigi
    f1c64740  soboves8
    cb7b4a5d  quhenen2rey
    5115242b  kozemof/fonaxo
    afeabd9a  qejahen
    71202402  kozemof/fijubey5di
    bd99e512  kozemof/napux
    ...

Hashes will be checked when the file is read from the archive and used
as part of syncing if possible.

    $ rclone copy -vv :archive:s3:rclone/dir/100files.zip /tmp/100files
    ...
    2025/10/27 14:56:44 DEBUG : kacak/turovat5c/yuyuquk: crc32 = abd05cc8 OK
    2025/10/27 14:56:44 DEBUG : kacak/turovat5c/yuyuquk.aeb661dc.partial: renamed to: kacak/turovat5c/yuyuquk
    2025/10/27 14:56:44 INFO  : kacak/turovat5c/yuyuquk: Copied (new)
    ...

Zip

The Zip file format is a widely used archive format that bundles one or
more files and folders into a single file, primarily for easier storage
or transmission. It typically uses compression (most commonly the
DEFLATE algorithm) to reduce the overall size of the archived content.
Zip files are supported natively by most modern operating systems.

Rclone does not support the following advanced features of Zip files:

-   Splitting large archives into smaller parts
-   Password protection
-   Zstd compression

Squashfs

Squashfs is a compressed, read-only file system format primarily used in
Linux-based systems. It's designed to compress entire file systems
(including files, directories, and metadata) into a single archive file,
which can then be mounted and read directly, appearing as a normal
directory structure. Because it's read-only and highly compressed,
Squashfs is ideal for live CDs/USBs, embedded devices with limited
storage, and software package distribution, as it saves space and
ensures the integrity of the original files.

Rclone supports the following squashfs compression formats:

-   Gzip
-   Lzma
-   Xz
-   Zstd

These are not yet working:

-   Lzo - Not yet supported
-   Lz4 - Broken with "error decompressing: lz4: bad magic number"

Rclone works fastest with large squashfs block sizes. For example:

    mksquashfs 100files 100files.sqfs -comp zstd -b 1M

Limitations

Files in the archive backend are read only. It isn't possible to create
archives with the archive backend yet. However you can create archives
with rclone archive create.

Only .zip and .sqfs archives are supported as these are the only common
archiving formats which make it easy to read directory listings from the
archive without downloading the whole archive.

Internally the archive backend uses the VFS to access files. It isn't
possible to configure the internal VFS yet which might be useful.

Archive Formats

Here's a table rating common archive formats on their Cloud Optimization
which is based on their ability to access a single file without reading
the entire archive.

This capability depends on whether the format has a central index (or
"table of contents") that a program can read first to find the exact
location of a specific file.

  -----------------------------------------------------------------------
  Format            Extensions        Cloud Optimized   Explanation
  ----------------- ----------------- ----------------- -----------------
  ZIP               .zip              Excellent         Zip files have an
                                                        index (the
                                                        "central
                                                        directory")
                                                        stored at the end
                                                        of the file. A
                                                        program can seek
                                                        to the end, read
                                                        the index to find
                                                        a file's location
                                                        and size, and
                                                        then seek
                                                        directly to that
                                                        file's data to
                                                        extract it.

  SquashFS          .squashfs, .sqfs, Excellent         This is a
                    .sfs                                compressed
                                                        read-only
                                                        filesystem image,
                                                        not just an
                                                        archive. It is
                                                        specifically
                                                        designed for
                                                        random access. It
                                                        uses metadata and
                                                        index tables to
                                                        allow the system
                                                        to find and
                                                        decompress
                                                        individual files
                                                        or data blocks on
                                                        demand.

  ISO Image         .iso              Excellent         Like SquashFS,
                                                        this is a
                                                        filesystem image
                                                        (for optical
                                                        media). It
                                                        contains a
                                                        filesystem (like
                                                        ISO 9660 or UDF)
                                                        with a table of
                                                        contents at a
                                                        known location,
                                                        allowing for
                                                        direct access to
                                                        any file without
                                                        reading the whole
                                                        disk.

  RAR               .rar              Good              RAR supports
                                                        "non-solid" and
                                                        "solid" modes. In
                                                        the common
                                                        non-solid mode,
                                                        files are
                                                        compressed
                                                        separately, and
                                                        an index allows
                                                        for easy
                                                        single-file
                                                        extraction (like
                                                        ZIP). In "solid"
                                                        mode, this rating
                                                        would be "Very
                                                        Poor."

  7z                .7z               Poor              By default, 7z
                                                        uses "solid"
                                                        archives to
                                                        maximize
                                                        compression. This
                                                        compresses files
                                                        as one continuous
                                                        stream. To
                                                        extract a file
                                                        from the middle,
                                                        all preceding
                                                        files must be
                                                        decompressed
                                                        first. (If
                                                        explicitly
                                                        created as
                                                        "non-solid," its
                                                        rating would be
                                                        "Excellent").

  tar               .tar              Poor              "Tape Archive" is
                                                        a streaming
                                                        format with no
                                                        central index. To
                                                        find a file, you
                                                        must read the
                                                        archive from the
                                                        beginning,
                                                        checking each
                                                        file header one
                                                        by one until you
                                                        find the one you
                                                        want. This is
                                                        slow but doesn't
                                                        require
                                                        decompressing
                                                        data.

  Gzipped Tar       .tar.gz, .tgz     Very Poor         This is a tar
                                                        file (already
                                                        "Poor")
                                                        compressed with
                                                        gzip as a single,
                                                        non-seekable
                                                        stream. You
                                                        cannot seek. To
                                                        get any file, you
                                                        must decompress
                                                        the entire
                                                        archive from the
                                                        beginning up to
                                                        that file.

  Bzipped/XZ Tar    .tar.bz2, .tar.xz Very Poor         This is the same
                                                        principle as
                                                        tar.gz. The
                                                        entire archive is
                                                        one large
                                                        compressed block,
                                                        making random
                                                        access
                                                        impossible.
  -----------------------------------------------------------------------

Ideas for improvements

It would be possible to add ISO support fairly easily as the library we
use (go-diskfs) supports it. We could also add ext4 and fat32 the same
way, however in my experience these are not very common as files so
probably not worth it. Go-diskfs can also read partitions which we could
potentially take advantage of.

It would be possible to add write support, but this would only be for
creating new archives, not for updating existing archives.

Standard options

Here are the Standard options specific to archive (Read archives).

--archive-remote

Remote to wrap to read archives from.

Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
"myremote:bucket" or "myremote:".

If this is left empty, then the archive backend will use the root as the
remote.

This means that you can use :archive:remote:path and it will be
equivalent to setting remote="remote:path".

Properties:

-   Config: remote
-   Env Var: RCLONE_ARCHIVE_REMOTE
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to archive (Read archives).

--archive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_ARCHIVE_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Any metadata supported by the underlying remote is read and written.

See the metadata docs for more info.

Backblaze B2

B2 is Backblaze's cloud storage system.

Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, e.g. remote:bucket/path/to/dir.

Configuration

Here is an example of making a b2 configuration. First run

    rclone config

This will guide you through an interactive setup process. To
authenticate you will either need your Account ID (a short hex number)
and Master Application Key (a long hex number) OR an Application Key,
which is the recommended method. See below for further details on
generating and using an Application Key.

    No remotes found, make a new one\?
    n) New remote
    q) Quit config
    n/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Backblaze B2
       \ "b2"
    [snip]
    Storage> b2
    Account ID or Application Key ID
    account> 123456789abc
    Application Key
    key> 0123456789abcdef0123456789abcdef0123456789
    Endpoint for the service - leave blank normally.
    endpoint>
    Remote config
    Configuration complete.
    Options:
    - type: b2
    - account: 123456789abc
    - key: 0123456789abcdef0123456789abcdef0123456789
    - endpoint:
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This remote is called remote and can now be used like this

See all buckets

    rclone lsd remote:

Create a new bucket

    rclone mkdir remote:bucket

List the contents of a bucket

    rclone ls remote:bucket

Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.

    rclone sync --interactive /home/local/directory remote:bucket

Application Keys

B2 supports multiple Application Keys for different access permission to
B2 Buckets.

You can use these with rclone too; you will need to use rclone version
1.43 or later.

Follow Backblaze's docs to create an Application Key with the required
permission and add the applicationKeyId as the account and the
Application Key itself as the key.

Note that you must put the applicationKeyId as the account – you can't
use the master Account ID. If you try then B2 will return 401 errors.

--fast-list

This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

Modification times

The modification time is stored as metadata on the object as
X-Bz-Info-src_last_modified_millis as milliseconds since 1970-01-01 in
the Backblaze standard. Other tools should be able to use this as a
modified time.

Modified times are used in syncing and are fully supported. Note that if
a modification time needs to be updated on an object then it will create
a new version of the object.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Note that in 2020-05 Backblaze started allowing  characters in file
names. Rclone hasn't changed its encoding as this could cause syncs to
re-transfer files. If you want rclone not to replace  then see the
--b2-encoding flag below and remove the BackSlash from the string. This
can be set in the config.

SHA1 checksums

The SHA1 checksums of the files are checked on upload and download and
will be used in the syncing process.

Large files (bigger than the limit in --b2-upload-cutoff) which are
uploaded in chunks will store their SHA1 on the object as
X-Bz-Info-large_file_sha1 as recommended by Backblaze.

For a large file to be uploaded with an SHA1 checksum, the source needs
to support SHA1 checksums. The local disk supports SHA1 checksums so
large file transfers from local disk will have an SHA1. See the overview
for exactly which remotes support SHA1.

Sources which don't support SHA1, in particular crypt will upload large
files without SHA1 checksums. This may be fixed in the future (see
#1767).

Files sizes below --b2-upload-cutoff will always have an SHA1 regardless
of the source.

Transfers

Backblaze recommends that you do lots of transfers simultaneously for
maximum speed. In tests from my SSD equipped laptop the optimum setting
is about --transfers 32 though higher numbers may be used for a slight
speed improvement. The optimum number for you may vary depending on your
hardware, how big the files are, how much you want to load your
computer, etc. The default of --transfers 4 is definitely too low for
Backblaze B2 though.

Note that uploading big files (bigger than 200 MiB by default) will use
a 96 MiB RAM buffer by default. There can be at most --transfers of
these in use at any moment, so this sets the upper limit on the memory
used.

Versions

The default setting of B2 is to keep old versions of files. This means
when rclone uploads a new version of a file it creates a new version of
it. Likewise when you delete a file, the old version will be marked
hidden and still be available.

Whether B2 keeps old versions of files or not can be adjusted on a per
bucket basis using the "Lifecycle settings" on the B2 control panel or
when creating the bucket using the --b2-lifecycle flag or after creation
using the rclone backend lifecycle command.

You may opt in to a "hard delete" of files with the --b2-hard-delete
flag which permanently removes files on deletion instead of hiding them.

Old versions of files, where available, are visible using the
--b2-versions flag. These can be deleted as required with delete.

It is also possible to view a bucket as it was at a certain point in
time, using the --b2-version-at flag. This will show the file versions
as they were at that time, showing files that have been deleted
afterwards, and hiding files that were created since.

If you wish to remove all the old versions, and unfinished large file
uploads, then you can use the rclone cleanup remote:bucket command which
will delete all the old versions of files, leaving the current ones
intact. You can also supply a path and only old versions under that path
will be deleted, e.g. rclone cleanup remote:bucket/path/to/stuff.

Note that cleanup will remove partially uploaded files from the bucket
if they are more than a day old. If you want more control over the
expiry date then run rclone backend cleanup b2:bucket -o max-age=1h to
remove all unfinished large file uploads older than one hour, leaving
old versions intact.

If you wish to remove all the old versions, leaving current files and
unfinished large files intact, then you can use the
rclone backend cleanup-hidden remote:bucket command. You can also supply
a path and only old versions under that path will be deleted, e.g.
rclone backend cleanup-hidden remote:bucket/path/to/stuff.

When you purge a bucket, the current and the old versions will be
deleted then the bucket will be deleted.

However delete will cause the current versions of the files to become
hidden old versions.

Here is a session showing the listing and retrieval of an old version
followed by a cleanup of the old versions.

Show current version and all the versions with --b2-versions flag.

    $ rclone -q ls b2:cleanup-test
            9 one.txt

    $ rclone -q --b2-versions ls b2:cleanup-test
            9 one.txt
            8 one-v2016-07-04-141032-000.txt
           16 one-v2016-07-04-141003-000.txt
           15 one-v2016-07-02-155621-000.txt

Retrieve an old version

    $ rclone -q --b2-versions copy b2:cleanup-test/one-v2016-07-04-141003-000.txt /tmp

    $ ls -l /tmp/one-v2016-07-04-141003-000.txt
    -rw-rw-r-- 1 ncw ncw 16 Jul  2 17:46 /tmp/one-v2016-07-04-141003-000.txt

Clean up all the old versions and show that they've gone.

    $ rclone -q cleanup b2:cleanup-test

    $ rclone -q ls b2:cleanup-test
            9 one.txt

    $ rclone -q --b2-versions ls b2:cleanup-test
            9 one.txt

Versions naming caveat

When using --b2-versions flag rclone is relying on the file name to work
out whether the objects are versions or not. Versions' names are created
by inserting timestamp between file name and its extension.

            9 file.txt
            8 file-v2023-07-17-161032-000.txt
           16 file-v2023-06-15-141003-000.txt

If there are real files present with the same names as versions, then
behaviour of --b2-versions can be unpredictable.

Data usage

It is useful to know how many requests are sent to the server in
different scenarios.

All copy commands send the following 4 requests:

    /b2api/v4/b2_authorize_account
    /b2api/v1/b2_create_bucket
    /b2api/v1/b2_list_buckets
    /b2api/v1/b2_list_file_names

The b2_list_file_names request will be sent once for every 1k files in
the remote path, providing the checksum and modification time of the
listed files. As of version 1.33 issue #818 causes extra requests to be
sent when using B2 with Crypt. When a copy operation does not require
any files to be uploaded, no more requests will be sent.

Uploading files that do not require chunking, will send 2 requests per
file upload:

    /b2api/v1/b2_get_upload_url
    /b2api/v1/b2_upload_file/

Uploading files requiring chunking, will send 2 requests (one each to
start and finish the upload) and another 2 requests for each chunk:

    /b2api/v1/b2_start_large_file
    /b2api/v1/b2_get_upload_part_url
    /b2api/v1/b2_upload_part/
    /b2api/v1/b2_finish_large_file

Viewing versions with --b2-versions

Versions can be viewed with the --b2-versions flag. When it is set
rclone will show and act on older versions of files. For example

Listing without --b2-versions

    $ rclone -q ls b2:cleanup-test
            9 one.txt

And with

    $ rclone -q --b2-versions ls b2:cleanup-test
            9 one.txt
            8 one-v2016-07-04-141032-000.txt
           16 one-v2016-07-04-141003-000.txt
           15 one-v2016-07-02-155621-000.txt

Showing that the current version is unchanged but older versions can be
seen. These have the UTC date that they were uploaded to the server to
the nearest millisecond appended to them.

Note that when using --b2-versions no file write operations are
permitted, so you can't upload files or delete them.

B2 and rclone link

Rclone supports generating file share links for private B2 buckets. They
can either be for a file for example:

    ./rclone link B2:bucket/path/to/file.txt
    https://f002.backblazeb2.com/file/bucket/path/to/file.txt?Authorization=xxxxxxxx

or if run on a directory you will get:

    ./rclone link B2:bucket/path
    https://f002.backblazeb2.com/file/bucket/path?Authorization=xxxxxxxx

you can then use the authorization token (the part of the url from the
?Authorization= on) on any file path under that directory. For example:

    https://f002.backblazeb2.com/file/bucket/path/to/file1?Authorization=xxxxxxxx
    https://f002.backblazeb2.com/file/bucket/path/file2?Authorization=xxxxxxxx
    https://f002.backblazeb2.com/file/bucket/path/folder/file3?Authorization=xxxxxxxx

Standard options

Here are the Standard options specific to b2 (Backblaze B2).

--b2-account

Account ID or Application Key ID.

Properties:

-   Config: account
-   Env Var: RCLONE_B2_ACCOUNT
-   Type: string
-   Required: true

--b2-key

Application Key.

Properties:

-   Config: key
-   Env Var: RCLONE_B2_KEY
-   Type: string
-   Required: true

--b2-hard-delete

Permanently delete files on remote removal, otherwise hide files.

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_B2_HARD_DELETE
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to b2 (Backblaze B2).

--b2-endpoint

Endpoint for the service.

Leave blank normally.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_B2_ENDPOINT
-   Type: string
-   Required: false

--b2-test-mode

A flag string for X-Bz-Test-Mode header for debugging.

This is for debugging purposes only. Setting it to one of the strings
below will cause b2 to return specific errors:

-   "fail_some_uploads"
-   "expire_some_account_authorization_tokens"
-   "force_cap_exceeded"

These will be set in the "X-Bz-Test-Mode" header which is documented in
the b2 integrations checklist.

Properties:

-   Config: test_mode
-   Env Var: RCLONE_B2_TEST_MODE
-   Type: string
-   Required: false

--b2-versions

Include old versions in directory listings.

Note that when using this no file write operations are permitted, so you
can't upload files or delete them.

Properties:

-   Config: versions
-   Env Var: RCLONE_B2_VERSIONS
-   Type: bool
-   Default: false

--b2-version-at

Show file versions as they were at the specified time.

Note that when using this no file write operations are permitted, so you
can't upload files or delete them.

Properties:

-   Config: version_at
-   Env Var: RCLONE_B2_VERSION_AT
-   Type: Time
-   Default: off

--b2-upload-cutoff

Cutoff for switching to chunked upload.

Files above this size will be uploaded in chunks of "--b2-chunk-size".

This value should be set no larger than 4.657 GiB (== 5 GB).

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_B2_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 200Mi

--b2-copy-cutoff

Cutoff for switching to multipart copy.

Any files larger than this that need to be server-side copied will be
copied in chunks of this size.

The minimum is 0 and the maximum is 4.6 GiB.

Properties:

-   Config: copy_cutoff
-   Env Var: RCLONE_B2_COPY_CUTOFF
-   Type: SizeSuffix
-   Default: 4Gi

--b2-chunk-size

Upload chunk size.

When uploading large files, chunk the file into this size.

Must fit in memory. These chunks are buffered in memory and there might
a maximum of "--transfers" chunks in progress at once.

5,000,000 Bytes is the minimum size.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_B2_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 96Mi

--b2-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded
concurrently.

Note that chunks are stored in memory and there may be up to
"--transfers" * "--b2-upload-concurrency" chunks stored at once in
memory.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_B2_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 4

--b2-disable-checksum

Disable checksums for large (> upload cutoff) files.

Normally rclone will calculate the SHA1 checksum of the input before
uploading it so it can add it to metadata on the object. This is great
for data integrity checking but can cause long delays for large files to
start uploading.

Properties:

-   Config: disable_checksum
-   Env Var: RCLONE_B2_DISABLE_CHECKSUM
-   Type: bool
-   Default: false

--b2-download-url

Custom endpoint for downloads.

This is usually set to a Cloudflare CDN URL as Backblaze offers free
egress for data downloaded through the Cloudflare network. Rclone works
with private buckets by sending an "Authorization" header. If the custom
endpoint rewrites the requests for authentication, e.g., in Cloudflare
Workers, this header needs to be handled properly. Leave blank if you
want to use the endpoint provided by Backblaze.

The URL provided here SHOULD have the protocol and SHOULD NOT have a
trailing slash or specify the /file/bucket subpath as rclone will
request files with "{download_url}/file/{bucket_name}/{path}".

Example: > https://mysubdomain.mydomain.tld (No trailing "/", "file" or
"bucket")

Properties:

-   Config: download_url
-   Env Var: RCLONE_B2_DOWNLOAD_URL
-   Type: string
-   Required: false

--b2-download-auth-duration

Time before the public link authorization token will expire in s or
suffix ms|s|m|h|d.

This is used in combination with "rclone link" for making files
accessible to the public and sets the duration before the download
authorization token will expire.

The minimum value is 1 second. The maximum value is one week.

Properties:

-   Config: download_auth_duration
-   Env Var: RCLONE_B2_DOWNLOAD_AUTH_DURATION
-   Type: Duration
-   Default: 1w

--b2-memory-pool-flush-time

How often internal memory buffer pools will be flushed. (no longer used)

Properties:

-   Config: memory_pool_flush_time
-   Env Var: RCLONE_B2_MEMORY_POOL_FLUSH_TIME
-   Type: Duration
-   Default: 1m0s

--b2-memory-pool-use-mmap

Whether to use mmap buffers in internal memory pool. (no longer used)

Properties:

-   Config: memory_pool_use_mmap
-   Env Var: RCLONE_B2_MEMORY_POOL_USE_MMAP
-   Type: bool
-   Default: false

--b2-lifecycle

Set the number of days deleted files should be kept when creating a
bucket.

On bucket creation, this parameter is used to create a lifecycle rule
for the entire bucket.

If lifecycle is 0 (the default) it does not create a lifecycle rule so
the default B2 behaviour applies. This is to create versions of files on
delete and overwrite and to keep them indefinitely.

If lifecycle is >0 then it creates a single rule setting the number of
days before a file that is deleted or overwritten is deleted
permanently. This is known as daysFromHidingToDeleting in the b2 docs.

The minimum value for this parameter is 1 day.

You can also enable hard_delete in the config also which will mean
deletions won't cause versions but overwrites will still cause versions
to be made.

See: rclone backend lifecycle for setting lifecycles after bucket
creation.

Properties:

-   Config: lifecycle
-   Env Var: RCLONE_B2_LIFECYCLE
-   Type: int
-   Default: 0

--b2-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_B2_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--b2-sse-customer-algorithm

If using SSE-C, the server-side encryption algorithm used when storing
this object in B2.

Properties:

-   Config: sse_customer_algorithm
-   Env Var: RCLONE_B2_SSE_CUSTOMER_ALGORITHM
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None
    -   "AES256"
        -   Advanced Encryption Standard (256 bits key length)

--b2-sse-customer-key

To use SSE-C, you may provide the secret encryption key encoded in a
UTF-8 compatible string to encrypt/decrypt your data

Alternatively you can provide --sse-customer-key-base64.

Properties:

-   Config: sse_customer_key
-   Env Var: RCLONE_B2_SSE_CUSTOMER_KEY
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--b2-sse-customer-key-base64

To use SSE-C, you may provide the secret encryption key encoded in
Base64 format to encrypt/decrypt your data

Alternatively you can provide --sse-customer-key.

Properties:

-   Config: sse_customer_key_base64
-   Env Var: RCLONE_B2_SSE_CUSTOMER_KEY_BASE64
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--b2-sse-customer-key-md5

If using SSE-C you may provide the secret encryption key MD5 checksum
(optional).

If you leave it blank, this is calculated automatically from the
sse_customer_key provided.

Properties:

-   Config: sse_customer_key_md5
-   Env Var: RCLONE_B2_SSE_CUSTOMER_KEY_MD5
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--b2-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_B2_DESCRIPTION
-   Type: string
-   Required: false

Backend commands

Here are the commands specific to the b2 backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

lifecycle

Read or set the lifecycle for a bucket.

    rclone backend lifecycle remote: [options] [<arguments>+]

This command can be used to read or set the lifecycle for a bucket.

To show the current lifecycle rules:

    rclone backend lifecycle b2:bucket

This will dump something like this showing the lifecycle rules.

    [
        {
            "daysFromHidingToDeleting": 1,
            "daysFromUploadingToHiding": null,
            "daysFromStartingToCancelingUnfinishedLargeFiles": null,
            "fileNamePrefix": ""
        }
    ]

If there are no lifecycle rules (the default) then it will just return
[].

To reset the current lifecycle rules:

    rclone backend lifecycle b2:bucket -o daysFromHidingToDeleting=30
    rclone backend lifecycle b2:bucket -o daysFromUploadingToHiding=5 -o daysFromHidingToDeleting=1

This will run and then print the new lifecycle rules as above.

Rclone only lets you set lifecycles for the whole bucket with the
fileNamePrefix = "".

You can't disable versioning with B2. The best you can do is to set the
daysFromHidingToDeleting to 1 day. You can enable hard_delete in the
config also which will mean deletions won't cause versions but
overwrites will still cause versions to be made.

    rclone backend lifecycle b2:bucket -o daysFromHidingToDeleting=1

See: https://www.backblaze.com/docs/cloud-storage-lifecycle-rules

Options:

-   "daysFromHidingToDeleting": After a file has been hidden for this
    many days it is deleted. 0 is off.
-   "daysFromStartingToCancelingUnfinishedLargeFiles": Cancels any
    unfinished large file versions after this many days.
-   "daysFromUploadingToHiding": This many days after uploading a file
    is hidden.

cleanup

Remove unfinished large file uploads.

    rclone backend cleanup remote: [options] [<arguments>+]

This command removes unfinished large file uploads of age greater than
max-age, which defaults to 24 hours.

Note that you can use --interactive/-i or --dry-run with this command to
see what it would do.

    rclone backend cleanup b2:bucket/path/to/object
    rclone backend cleanup -o max-age=7w b2:bucket/path/to/object

Durations are parsed as per the rest of rclone, 2h, 7d, 7w etc.

Options:

-   "max-age": Max age of upload to delete.

cleanup-hidden

Remove old versions of files.

    rclone backend cleanup-hidden remote: [options] [<arguments>+]

This command removes any old hidden versions of files.

Note that you can use --interactive/-i or --dry-run with this command to
see what it would do.

    rclone backend cleanup-hidden b2:bucket/path/to/dir

Limitations

rclone about is not supported by the B2 backend. Backends without this
capability cannot determine free space for an rclone mount or use policy
mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Box

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

The initial setup for Box involves getting a token from Box which you
can do either in your browser, or with a config.json downloaded from Box
to use JWT authentication. rclone config walks you through it.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Box
       \ "box"
    [snip]
    Storage> box
    Box App Client Id - leave blank normally.
    client_id> 
    Box App Client Secret - leave blank normally.
    client_secret>
    Box App config.json location
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    box_config_file>
    Box App Primary Access Token
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    access_token>

    Enter a string value. Press Enter for the default ("user").
    Choose a number from below, or type in your own value
     1 / Rclone should act on behalf of a user
       \ "user"
     2 / Rclone should act on behalf of a service account
       \ "enterprise"
    box_sub_type>
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth?state=XXXXXXXXXXXXXXXXXXXXXX
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: box
    - client_id:
    - client_secret:
    - token: {"access_token":"XXX","token_type":"bearer","refresh_token":"XXX","expiry":"XXX"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Box. This only runs from the moment it opens your
browser to the moment you get back the verification code. This is on
http://127.0.0.1:53682/ and this may require you to unblock it
temporarily if you are running a host firewall.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your Box

    rclone lsd remote:

List all the files in your Box

    rclone ls remote:

To copy a local directory to an Box directory called backup

    rclone copy /home/source remote:backup

Using rclone with an Enterprise account with SSO

If you have an "Enterprise" account type with Box with single sign on
(SSO), you need to create a password to use Box with rclone. This can be
done at your Enterprise Box account by going to Settings, "Account" Tab,
and then set the password in the "Authentication" field.

Once you have done this, you can setup your Enterprise Box account using
the same procedure detailed above in the, using the password you have
just set.

Invalid refresh token

According to the box docs:

  Each refresh_token is valid for one use in 60 days.

This means that if you

-   Don't use the box remote for 60 days
-   Copy the config file with a box refresh token in and use it in two
    places
-   Get an error on a token refresh

then rclone will return an error which includes the text
Invalid refresh token.

To fix this you will need to use oauth2 again to update the refresh
token. You can use the methods in the remote setup docs, bearing in mind
that if you use the copy the config file method, you should not use that
remote on the computer you did the authentication on.

Here is how to do it.

    $ rclone config
    Current remotes:

    Name                 Type
    ====                 ====
    remote               box

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> e
    Choose a number from below, or type in an existing value
     1 > remote
    remote> remote
    Configuration complete.
    Options:
    - type: box
    - token: {"access_token":"XXX","token_type":"bearer","refresh_token":"XXX","expiry":"2017-07-08T23:40:08.059167677+01:00"}
    Keep this "remote" remote?
    Edit remote
    Value "client_id" = ""
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Value "client_secret" = ""
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Remote config
    Already have a token - refresh?
    y) Yes
    n) No
    y/n> y
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: box
    - token: {"access_token":"YYY","token_type":"bearer","refresh_token":"YYY","expiry":"2017-07-23T12:22:29.259137901+01:00"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Modification times and hashes

Box allows modification times to be set on objects accurate to 1 second.
These will be used to detect whether objects need syncing or not.

Box supports SHA1 type hashes, so you can use the --checksum flag.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼

File names can also not end with the following characters. These only
get replaced if they are the last character in the name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Transfers

For files above 50 MiB rclone will use a chunked transfer. Rclone will
upload up to --transfers chunks at the same time (shared among all the
multipart uploads). Chunks are buffered in memory and are normally 8 MiB
so increasing --transfers will increase memory use.

Deleting files

Depending on the enterprise settings for your user, the item will either
be actually deleted from Box or moved to the trash.

Emptying the trash is supported via the rclone however cleanup command
however this deletes every trashed file and folder individually so it
may take a very long time. Emptying the trash via the WebUI does not
have this limitation so it is advised to empty the trash via the WebUI.

Root folder ID

You can set the root_folder_id for rclone. This is the directory
(identified by its Folder ID) that rclone considers to be the root of
your Box drive.

Normally you will leave this blank and rclone will determine the correct
root to use itself.

However you can set this to restrict rclone to a specific folder
hierarchy.

In order to do this you will have to find the Folder ID of the directory
you wish rclone to display. This will be the last segment of the URL
when you open the relevant folder in the Box web interface.

So if the folder you want rclone to use has a URL which looks like
https://app.box.com/folder/11xxxxxxxxx8 in the browser, then you use
11xxxxxxxxx8 as the root_folder_id in the config.

Standard options

Here are the Standard options specific to box (Box).

--box-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_BOX_CLIENT_ID
-   Type: string
-   Required: false

--box-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_BOX_CLIENT_SECRET
-   Type: string
-   Required: false

--box-box-config-file

Box App config.json location

Leave blank normally.

Leading ~ will be expanded in the file name as will environment
variables such as ${RCLONE_CONFIG_DIR}.

Properties:

-   Config: box_config_file
-   Env Var: RCLONE_BOX_BOX_CONFIG_FILE
-   Type: string
-   Required: false

--box-config-credentials

Box App config.json contents.

Leave blank normally.

Properties:

-   Config: config_credentials
-   Env Var: RCLONE_BOX_CONFIG_CREDENTIALS
-   Type: string
-   Required: false

--box-access-token

Box App Primary Access Token

Leave blank normally.

Properties:

-   Config: access_token
-   Env Var: RCLONE_BOX_ACCESS_TOKEN
-   Type: string
-   Required: false

--box-box-sub-type

Properties:

-   Config: box_sub_type
-   Env Var: RCLONE_BOX_BOX_SUB_TYPE
-   Type: string
-   Default: "user"
-   Examples:
    -   "user"
        -   Rclone should act on behalf of a user.
    -   "enterprise"
        -   Rclone should act on behalf of a service account.

Advanced options

Here are the Advanced options specific to box (Box).

--box-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_BOX_TOKEN
-   Type: string
-   Required: false

--box-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_BOX_AUTH_URL
-   Type: string
-   Required: false

--box-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_BOX_TOKEN_URL
-   Type: string
-   Required: false

--box-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_BOX_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--box-root-folder-id

Fill in for rclone to use a non root folder as its starting point.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_BOX_ROOT_FOLDER_ID
-   Type: string
-   Default: "0"

--box-upload-cutoff

Cutoff for switching to multipart upload (>= 50 MiB).

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_BOX_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 50Mi

--box-commit-retries

Max number of times to try committing a multipart file.

Properties:

-   Config: commit_retries
-   Env Var: RCLONE_BOX_COMMIT_RETRIES
-   Type: int
-   Default: 100

--box-list-chunk

Size of listing chunk 1-1000.

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_BOX_LIST_CHUNK
-   Type: int
-   Default: 1000

--box-owned-by

Only show items owned by the login (email address) passed in.

Properties:

-   Config: owned_by
-   Env Var: RCLONE_BOX_OWNED_BY
-   Type: string
-   Required: false

--box-impersonate

Impersonate this user ID when using a service account.

Setting this flag allows rclone, when using a JWT service account, to
act on behalf of another user by setting the as-user header.

The user ID is the Box identifier for a user. User IDs can found for any
user via the GET /users endpoint, which is only available to admins, or
by calling the GET /users/me endpoint with an authenticated user
session.

See: https://developer.box.com/guides/authentication/jwt/as-user/

Properties:

-   Config: impersonate
-   Env Var: RCLONE_BOX_IMPERSONATE
-   Type: string
-   Required: false

--box-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_BOX_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,RightSpace,InvalidUtf8,Dot

--box-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_BOX_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Note that Box is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

Box file names can't have the \ character in. rclone maps this to and
from an identical looking unicode equivalent ＼ (U+FF3C Fullwidth
Reverse Solidus).

Box only supports filenames up to 255 characters in length.

Box has API rate limits that sometimes reduce the speed of rclone.

rclone about is not supported by the Box backend. Backends without this
capability cannot determine free space for an rclone mount or use policy
mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Get your own Box App ID

Here is how to create your own Box App ID for rclone:

1.  Go to the Box Developer Console and login, then click My Apps on the
    sidebar. Click Create New App and select Custom App.

2.  In the first screen on the box that pops up, you can pretty much
    enter whatever you want. The App Name can be whatever. For Purpose
    choose automation to avoid having to fill out anything else. Click
    Next.

3.  In the second screen of the creation screen, select
    User Authentication (OAuth 2.0). Then click Create App.

4.  You should now be on the Configuration tab of your new app. If not,
    click on it at the top of the webpage. Copy down Client ID and
    Client Secret, you'll need those for rclone.

5.  Under "OAuth 2.0 Redirect URI", add http://127.0.0.1:53682/

6.  For Application Scopes, select
    Read all files and folders stored in Box and
    Write all files and folders stored in box (assuming you want to do
    both). Leave others unchecked. Click Save Changes at the top right.

Cache

The cache remote wraps another existing remote and stores file structure
and its data for long running tasks like rclone mount.

It is deprecated so not recommended for use with new installations and
may be removed at some point.

Status

The cache backend code is working but it currently doesn't have a
maintainer so there are outstanding bugs which aren't getting fixed.

The cache backend is due to be phased out in favour of the VFS caching
layer eventually which is more tightly integrated into rclone.

Until this happens we recommend only using the cache backend if you find
you can't work without it. There are many docs online describing the use
of the cache backend to minimize API hits and by-and-large these are out
of date and the cache backend isn't needed in those scenarios any more.

Configuration

To get started you just need to have an existing remote which can be
configured with cache.

Here is an example of how to make a remote called test-cache. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    n/r/c/s/q> n
    name> test-cache
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Cache a remote
       \ "cache"
    [snip]
    Storage> cache
    Remote to cache.
    Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
    "myremote:bucket" or maybe "myremote:" (not recommended).
    remote> local:/test
    Optional: The URL of the Plex server
    plex_url> http://127.0.0.1:32400
    Optional: The username of the Plex user
    plex_username> dummyusername
    Optional: The password of the Plex user
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    The size of a chunk. Lower value good for slow connections but can affect seamless reading.
    Default: 5M
    Choose a number from below, or type in your own value
     1 / 1 MiB
       \ "1M"
     2 / 5 MiB
       \ "5M"
     3 / 10 MiB
       \ "10M"
    chunk_size> 2
    How much time should object info (file size, file hashes, etc.) be stored in cache. Use a very high value if you don't plan on changing the source FS from outside the cache.
    Accepted units are: "s", "m", "h".
    Default: 5m
    Choose a number from below, or type in your own value
     1 / 1 hour
       \ "1h"
     2 / 24 hours
       \ "24h"
     3 / 24 hours
       \ "48h"
    info_age> 2
    The maximum size of stored chunks. When the storage grows beyond this size, the oldest chunks will be deleted.
    Default: 10G
    Choose a number from below, or type in your own value
     1 / 500 MiB
       \ "500M"
     2 / 1 GiB
       \ "1G"
     3 / 10 GiB
       \ "10G"
    chunk_total_size> 3
    Remote config
    --------------------
    [test-cache]
    remote = local:/test
    plex_url = http://127.0.0.1:32400
    plex_username = dummyusername
    plex_password = *** ENCRYPTED ***
    chunk_size = 5M
    info_age = 48h
    chunk_total_size = 10G

You can then use it like this,

List directories in top level of your drive

    rclone lsd test-cache:

List all the files in your drive

    rclone ls test-cache:

To start a cached mount

    rclone mount --allow-other test-cache: /var/tmp/test-cache

Write Features

Offline uploading

In an effort to make writing through cache more reliable, the backend
now supports this feature which can be activated by specifying a
cache-tmp-upload-path.

A files goes through these states when using this feature:

1.  An upload is started (usually by copying a file on the cache remote)
2.  When the copy to the temporary location is complete the file is part
    of the cached remote and looks and behaves like any other file
    (reading included)
3.  After cache-tmp-wait-time passes and the file is next in line,
    rclone move is used to move the file to the cloud provider
4.  Reading the file still works during the upload but most
    modifications on it will be prohibited
5.  Once the move is complete the file is unlocked for modifications as
    it becomes as any other regular file
6.  If the file is being read through cache when it's actually deleted
    from the temporary path then cache will simply swap the source to
    the cloud provider without interrupting the reading (small blip can
    happen though)

Files are uploaded in sequence and only one file is uploaded at a time.
Uploads will be stored in a queue and be processed based on the order
they were added. The queue and the temporary storage is persistent
across restarts but can be cleared on startup with the --cache-db-purge
flag.

Write Support

Writes are supported through cache. One caveat is that a mounted cache
remote does not add any retry or fallback mechanism to the upload
operation. This will depend on the implementation of the wrapped remote.
Consider using Offline uploading for reliable writes.

One special case is covered with cache-writes which will cache the file
data at the same time as the upload when it is enabled making it
available from the cache store immediately once the upload is finished.

Read Features

Multiple connections

To counter the high latency between a local PC where rclone is running
and cloud providers, the cache remote can split multiple requests to the
cloud provider for smaller file chunks and combines them together
locally where they can be available almost immediately before the reader
usually needs them.

This is similar to buffering when media files are played online. Rclone
will stay around the current marker but always try its best to stay
ahead and prepare the data before.

Plex Integration

There is a direct integration with Plex which allows cache to detect
during reading if the file is in playback or not. This helps cache to
adapt how it queries the cloud provider depending on what is needed for.

Scans will have a minimum amount of workers (1) while in a confirmed
playback cache will deploy the configured number of workers.

This integration opens the doorway to additional performance
improvements which will be explored in the near future.

Note: If Plex options are not configured, cache will function with its
configured options without adapting any of its settings.

How to enable? Run rclone config and add all the Plex options (endpoint,
username and password) in your remote and it will be automatically
enabled.

Affected settings:

-   cache-workers: Configured value during confirmed playback or 1 all
    the other times

Certificate Validation

When the Plex server is configured to only accept secure connections, it
is possible to use .plex.direct URLs to ensure certificate validation
succeeds. These URLs are used by Plex internally to connect to the Plex
server securely.

The format for these URLs is the following:

https://ip-with-dots-replaced.server-hash.plex.direct:32400/

The ip-with-dots-replaced part can be any IPv4 address, where the dots
have been replaced with dashes, e.g. 127.0.0.1 becomes 127-0-0-1.

To get the server-hash part, the easiest way is to visit

https://plex.tv/api/resources?includeHttps=1&X-Plex-Token=your-plex-token

This page will list all the available Plex servers for your account with
at least one .plex.direct link for each. Copy one URL and replace the IP
address with the desired address. This can be used as the plex_url
value.

Known issues

Mount and --dir-cache-time

--dir-cache-time controls the first layer of directory caching which
works at the mount layer. Being an independent caching mechanism from
the cache backend, it will manage its own entries based on the
configured time.

To avoid getting in a scenario where dir cache has obsolete data and
cache would have the correct one, try to set --dir-cache-time to a lower
time than --cache-info-age. Default values are already configured in
this way.

Windows support - Experimental

There are a couple of issues with Windows mount functionality that still
require some investigations. It should be considered as experimental
thus far as fixes come in for this OS.

Most of the issues seem to be related to the difference between
filesystems on Linux flavors and Windows as cache is heavily dependent
on them.

Any reports or feedback on how cache behaves on this OS is greatly
appreciated.

-   Issue #1935
-   Issue #1907
-   Issue #1834

Risk of throttling

Future iterations of the cache backend will make use of the pooling
functionality of the cloud provider to synchronize and at the same time
make writing through it more tolerant to failures.

There are a couple of enhancements in track to add these but in the
meantime there is a valid concern that the expiring cache listings can
lead to cloud provider throttles or bans due to repeated queries on it
for very large mounts.

Some recommendations:

-   don't use a very small interval for entry information
    (--cache-info-age)
-   while writes aren't yet optimised, you can still write through cache
    which gives you the advantage of adding the file in the cache at the
    same time if configured to do so.

Future enhancements:

-   Issue #1937
-   Issue #1936

cache and crypt

One common scenario is to keep your data encrypted in the cloud provider
using the crypt remote. crypt uses a similar technique to wrap around an
existing remote and handles this translation in a seamless way.

There is an issue with wrapping the remotes in this order: cloud remote
-> crypt -> cache

During testing, I experienced a lot of bans with the remotes in this
order. I suspect it might be related to how crypt opens files on the
cloud provider which makes it think we're downloading the full file
instead of small chunks. Organizing the remotes in this order yields
better results: cloud remote -> cache -> crypt

absolute remote paths

cache can not differentiate between relative and absolute paths for the
wrapped remote. Any path given in the remote config setting and on the
command line will be passed to the wrapped remote as is, but for storing
the chunks on disk the path will be made relative by removing any
leading / character.

This behavior is irrelevant for most backend types, but there are
backends where a leading / changes the effective directory, e.g. in the
sftp backend paths starting with a / are relative to the root of the SSH
server and paths without are relative to the user home directory. As a
result sftp:bin and sftp:/bin will share the same cache folder, even if
they represent a different directory on the SSH server.

Cache and Remote Control (--rc)

Cache supports the new --rc mode in rclone and can be remote controlled
through the following end points: By default, the listener is disabled
if you do not add the flag.

rc cache/expire

Purge a remote from the cache backend. Supports either a directory or a
file. It supports both encrypted and unencrypted file names if cache is
wrapped by crypt.

Params:

-   remote = path to remote (required)
-   withData = true/false to delete cached data (chunks) as well
    (optional, false by default)

Standard options

Here are the Standard options specific to cache (Cache a remote).

--cache-remote

Remote to cache.

Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
"myremote:bucket" or maybe "myremote:" (not recommended).

Properties:

-   Config: remote
-   Env Var: RCLONE_CACHE_REMOTE
-   Type: string
-   Required: true

--cache-plex-url

The URL of the Plex server.

Properties:

-   Config: plex_url
-   Env Var: RCLONE_CACHE_PLEX_URL
-   Type: string
-   Required: false

--cache-plex-username

The username of the Plex user.

Properties:

-   Config: plex_username
-   Env Var: RCLONE_CACHE_PLEX_USERNAME
-   Type: string
-   Required: false

--cache-plex-password

The password of the Plex user.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: plex_password
-   Env Var: RCLONE_CACHE_PLEX_PASSWORD
-   Type: string
-   Required: false

--cache-chunk-size

The size of a chunk (partial file data).

Use lower numbers for slower connections. If the chunk size is changed,
any downloaded chunks will be invalid and cache-chunk-path will need to
be cleared or unexpected EOF errors will occur.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_CACHE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 5Mi
-   Examples:
    -   "1M"
        -   1 MiB
    -   "5M"
        -   5 MiB
    -   "10M"
        -   10 MiB

--cache-info-age

How long to cache file structure information (directory listings, file
size, times, etc.). If all write operations are done through the cache
then you can safely make this value very large as the cache store will
also be updated in real time.

Properties:

-   Config: info_age
-   Env Var: RCLONE_CACHE_INFO_AGE
-   Type: Duration
-   Default: 6h0m0s
-   Examples:
    -   "1h"
        -   1 hour
    -   "24h"
        -   24 hours
    -   "48h"
        -   48 hours

--cache-chunk-total-size

The total size that the chunks can take up on the local disk.

If the cache exceeds this value then it will start to delete the oldest
chunks until it goes under this value.

Properties:

-   Config: chunk_total_size
-   Env Var: RCLONE_CACHE_CHUNK_TOTAL_SIZE
-   Type: SizeSuffix
-   Default: 10Gi
-   Examples:
    -   "500M"
        -   500 MiB
    -   "1G"
        -   1 GiB
    -   "10G"
        -   10 GiB

Advanced options

Here are the Advanced options specific to cache (Cache a remote).

--cache-plex-token

The plex token for authentication - auto set normally.

Properties:

-   Config: plex_token
-   Env Var: RCLONE_CACHE_PLEX_TOKEN
-   Type: string
-   Required: false

--cache-plex-insecure

Skip all certificate verification when connecting to the Plex server.

Properties:

-   Config: plex_insecure
-   Env Var: RCLONE_CACHE_PLEX_INSECURE
-   Type: string
-   Required: false

--cache-db-path

Directory to store file structure metadata DB.

The remote name is used as the DB file name.

Properties:

-   Config: db_path
-   Env Var: RCLONE_CACHE_DB_PATH
-   Type: string
-   Default: "$HOME/.cache/rclone/cache-backend"

--cache-chunk-path

Directory to cache chunk files.

Path to where partial file data (chunks) are stored locally. The remote
name is appended to the final path.

This config follows the "--cache-db-path". If you specify a custom
location for "--cache-db-path" and don't specify one for
"--cache-chunk-path" then "--cache-chunk-path" will use the same path as
"--cache-db-path".

Properties:

-   Config: chunk_path
-   Env Var: RCLONE_CACHE_CHUNK_PATH
-   Type: string
-   Default: "$HOME/.cache/rclone/cache-backend"

--cache-db-purge

Clear all the cached data for this remote on start.

Properties:

-   Config: db_purge
-   Env Var: RCLONE_CACHE_DB_PURGE
-   Type: bool
-   Default: false

--cache-chunk-clean-interval

How often should the cache perform cleanups of the chunk storage.

The default value should be ok for most people. If you find that the
cache goes over "cache-chunk-total-size" too often then try to lower
this value to force it to perform cleanups more often.

Properties:

-   Config: chunk_clean_interval
-   Env Var: RCLONE_CACHE_CHUNK_CLEAN_INTERVAL
-   Type: Duration
-   Default: 1m0s

--cache-read-retries

How many times to retry a read from a cache storage.

Since reading from a cache stream is independent from downloading file
data, readers can get to a point where there's no more data in the
cache. Most of the times this can indicate a connectivity issue if cache
isn't able to provide file data anymore.

For really slow connections, increase this to a point where the stream
is able to provide data but your experience will be very stuttering.

Properties:

-   Config: read_retries
-   Env Var: RCLONE_CACHE_READ_RETRIES
-   Type: int
-   Default: 10

--cache-workers

How many workers should run in parallel to download chunks.

Higher values will mean more parallel processing (better CPU needed) and
more concurrent requests on the cloud provider. This impacts several
aspects like the cloud provider API limits, more stress on the hardware
that rclone runs on but it also means that streams will be more fluid
and data will be available much more faster to readers.

Note: If the optional Plex integration is enabled then this setting will
adapt to the type of reading performed and the value specified here will
be used as a maximum number of workers to use.

Properties:

-   Config: workers
-   Env Var: RCLONE_CACHE_WORKERS
-   Type: int
-   Default: 4

--cache-chunk-no-memory

Disable the in-memory cache for storing chunks during streaming.

By default, cache will keep file data during streaming in RAM as well to
provide it to readers as fast as possible.

This transient data is evicted as soon as it is read and the number of
chunks stored doesn't exceed the number of workers. However, depending
on other settings like "cache-chunk-size" and "cache-workers" this
footprint can increase if there are parallel streams too (multiple files
being read at the same time).

If the hardware permits it, use this feature to provide an overall
better performance during streaming but it can also be disabled if RAM
is not available on the local machine.

Properties:

-   Config: chunk_no_memory
-   Env Var: RCLONE_CACHE_CHUNK_NO_MEMORY
-   Type: bool
-   Default: false

--cache-rps

Limits the number of requests per second to the source FS (-1 to
disable).

This setting places a hard limit on the number of requests per second
that cache will be doing to the cloud provider remote and try to respect
that value by setting waits between reads.

If you find that you're getting banned or limited on the cloud provider
through cache and know that a smaller number of requests per second will
allow you to work with it then you can use this setting for that.

A good balance of all the other settings should make this setting
useless but it is available to set for more special cases.

NOTE: This will limit the number of requests during streams but other
API calls to the cloud provider like directory listings will still pass.

Properties:

-   Config: rps
-   Env Var: RCLONE_CACHE_RPS
-   Type: int
-   Default: -1

--cache-writes

Cache file data on writes through the FS.

If you need to read files immediately after you upload them through
cache you can enable this flag to have their data stored in the cache
store at the same time during upload.

Properties:

-   Config: writes
-   Env Var: RCLONE_CACHE_WRITES
-   Type: bool
-   Default: false

--cache-tmp-upload-path

Directory to keep temporary files until they are uploaded.

This is the path where cache will use as a temporary storage for new
files that need to be uploaded to the cloud provider.

Specifying a value will enable this feature. Without it, it is
completely disabled and files will be uploaded directly to the cloud
provider

Properties:

-   Config: tmp_upload_path
-   Env Var: RCLONE_CACHE_TMP_UPLOAD_PATH
-   Type: string
-   Required: false

--cache-tmp-wait-time

How long should files be stored in local cache before being uploaded.

This is the duration that a file must wait in the temporary location
cache-tmp-upload-path before it is selected for upload.

Note that only one file is uploaded at a time and it can take longer to
start the upload if a queue formed for this purpose.

Properties:

-   Config: tmp_wait_time
-   Env Var: RCLONE_CACHE_TMP_WAIT_TIME
-   Type: Duration
-   Default: 15s

--cache-db-wait-time

How long to wait for the DB to be available - 0 is unlimited.

Only one process can have the DB open at any one time, so rclone waits
for this duration for the DB to become available before it gives an
error.

If you set it to 0 then it will wait forever.

Properties:

-   Config: db_wait_time
-   Env Var: RCLONE_CACHE_DB_WAIT_TIME
-   Type: Duration
-   Default: 1s

--cache-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_CACHE_DESCRIPTION
-   Type: string
-   Required: false

Backend commands

Here are the commands specific to the cache backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

stats

Print stats on the cache backend in JSON format.

    rclone backend stats remote: [options] [<arguments>+]

Chunker

The chunker overlay transparently splits large files into smaller chunks
during upload to wrapped remote and transparently assembles them back
when the file is downloaded. This allows to effectively overcome size
limits imposed by storage providers.

Configuration

To use it, first set up the underlying remote following the
configuration instructions for that remote. You can also use a local
pathname instead of a remote.

First check your chosen remote is working - we'll call it remote:path
here. Note that anything inside remote:path will be chunked and anything
outside won't. This means that if you are using a bucket-based remote
(e.g. S3, B2, swift) then you should probably put the bucket in the
remote s3:bucket.

Now configure chunker using rclone config. We will call this one overlay
to separate it from the remote itself.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> overlay
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Transparently chunk/split large files
       \ "chunker"
    [snip]
    Storage> chunker
    Remote to chunk/unchunk.
    Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
    "myremote:bucket" or maybe "myremote:" (not recommended).
    Enter a string value. Press Enter for the default ("").
    remote> remote:path
    Files larger than chunk size will be split in chunks.
    Enter a size with suffix K,M,G,T. Press Enter for the default ("2G").
    chunk_size> 100M
    Choose how chunker handles hash sums. All modes but "none" require metadata.
    Enter a string value. Press Enter for the default ("md5").
    Choose a number from below, or type in your own value
     1 / Pass any hash supported by wrapped remote for non-chunked files, return nothing otherwise
       \ "none"
     2 / MD5 for composite files
       \ "md5"
     3 / SHA1 for composite files
       \ "sha1"
     4 / MD5 for all files
       \ "md5all"
     5 / SHA1 for all files
       \ "sha1all"
     6 / Copying a file to chunker will request MD5 from the source falling back to SHA1 if unsupported
       \ "md5quick"
     7 / Similar to "md5quick" but prefers SHA1 over MD5
       \ "sha1quick"
    hash_type> md5
    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> n
    Remote config
    --------------------
    [overlay]
    type = chunker
    remote = remote:bucket
    chunk_size = 100M
    hash_type = md5
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Specifying the remote

In normal use, make sure the remote has a : in. If you specify the
remote without a : then rclone will use a local directory of that name.
So if you use a remote of /path/to/secret/files then rclone will chunk
stuff in that directory. If you use a remote of name then rclone will
put files in a directory called name in the current directory.

Chunking

When rclone starts a file upload, chunker checks the file size. If it
doesn't exceed the configured chunk size, chunker will just pass the
file to the wrapped remote (however, see caveat below). If a file is
large, chunker will transparently cut data in pieces with temporary
names and stream them one by one, on the fly. Each data chunk will
contain the specified number of bytes, except for the last one which may
have less data. If file size is unknown in advance (this is called a
streaming upload), chunker will internally create a temporary copy,
record its size and repeat the above process.

When upload completes, temporary chunk files are finally renamed. This
scheme guarantees that operations can be run in parallel and look from
outside as atomic. A similar method with hidden temporary chunks is used
for other operations (copy/move/rename, etc.). If an operation fails,
hidden chunks are normally destroyed, and the target composite file
stays intact.

When a composite file download is requested, chunker transparently
assembles it by concatenating data chunks in order. As the split is
trivial one could even manually concatenate data chunks together to
obtain the original content.

When the list rclone command scans a directory on wrapped remote, the
potential chunk files are accounted for, grouped and assembled into
composite directory entries. Any temporary chunks are hidden.

List and other commands can sometimes come across composite files with
missing or invalid chunks, e.g. shadowed by like-named directory or
another file. This usually means that wrapped file system has been
directly tampered with or damaged. If chunker detects a missing chunk it
will by default print warning, skip the whole incomplete group of chunks
but proceed with current command. You can set the --chunker-fail-hard
flag to have commands abort with error message in such cases.

Caveat: As it is now, chunker will always create a temporary file in the
backend and then rename it, even if the file is below the chunk
threshold. This will result in unnecessary API calls and can severely
restrict throughput when handling transfers primarily composed of small
files on some backends (e.g. Box). A workaround to this issue is to use
chunker only for files above the chunk threshold via --min-size and then
perform a separate call without chunker on the remaining files.

Chunk names

The default chunk name format is *.rclone_chunk.###, hence by default
chunk names are BIG_FILE_NAME.rclone_chunk.001,
BIG_FILE_NAME.rclone_chunk.002 etc. You can configure another name
format using the name_format configuration file option. The format uses
asterisk * as a placeholder for the base file name and one or more
consecutive hash characters # as a placeholder for sequential chunk
number. There must be one and only one asterisk. The number of
consecutive hash characters defines the minimum length of a string
representing a chunk number. If decimal chunk number has less digits
than the number of hashes, it is left-padded by zeros. If the decimal
string is longer, it is left intact. By default numbering starts from 1
but there is another option that allows user to start from 0, e.g. for
compatibility with legacy software.

For example, if name format is big_*-##.part and original file name is
data.txt and numbering starts from 0, then the first chunk will be named
big_data.txt-00.part, the 99th chunk will be big_data.txt-98.part and
the 302nd chunk will become big_data.txt-301.part.

Note that list assembles composite directory entries only when chunk
names match the configured format and treats non-conforming file names
as normal non-chunked files.

When using norename transactions, chunk names will additionally have a
unique file version suffix. For example,
BIG_FILE_NAME.rclone_chunk.001_bp562k.

Metadata

Besides data chunks chunker will by default create metadata object for a
composite file. The object is named after the original file. Chunker
allows user to disable metadata completely (the none format). Note that
metadata is normally not created for files smaller than the configured
chunk size. This may change in future rclone releases.

Simple JSON metadata format

This is the default format. It supports hash sums and chunk validation
for composite files. Meta objects carry the following fields:

-   ver - version of format, currently 1
-   size - total size of composite file
-   nchunks - number of data chunks in file
-   md5 - MD5 hashsum of composite file (if present)
-   sha1 - SHA1 hashsum (if present)
-   txn - identifies current version of the file

There is no field for composite file name as it's simply equal to the
name of meta object on the wrapped remote. Please refer to respective
sections for details on hashsums and modified time handling.

No metadata

You can disable meta objects by setting the meta format option to none.
In this mode chunker will scan directory for all files that follow
configured chunk name format, group them by detecting chunks with the
same base name and show group names as virtual composite files. This
method is more prone to missing chunk errors (especially missing last
chunk) than format with metadata enabled.

Hashsums

Chunker supports hashsums only when a compatible metadata is present.
Hence, if you choose metadata format of none, chunker will report
hashsum as UNSUPPORTED.

Please note that by default metadata is stored only for composite files.
If a file is smaller than configured chunk size, chunker will
transparently redirect hash requests to wrapped remote, so support
depends on that. You will see the empty string as a hashsum of requested
type for small files if the wrapped remote doesn't support it.

Many storage backends support MD5 and SHA1 hash types, so does chunker.
With chunker you can choose one or another but not both. MD5 is set by
default as the most supported type. Since chunker keeps hashes for
composite files and falls back to the wrapped remote hash for
non-chunked ones, we advise you to choose the same hash type as
supported by wrapped remote so that your file listings look coherent.

If your storage backend does not support MD5 or SHA1 but you need
consistent file hashing, configure chunker with md5all or sha1all. These
two modes guarantee given hash for all files. If wrapped remote doesn't
support it, chunker will then add metadata to all files, even small.
However, this can double the amount of small files in storage and incur
additional service charges. You can even use chunker to force md5/sha1
support in any other remote at expense of sidecar meta objects by
setting e.g. hash_type=sha1all to force hashsums and chunk_size=1P to
effectively disable chunking.

Normally, when a file is copied to chunker controlled remote, chunker
will ask the file source for compatible file hash and revert to
on-the-fly calculation if none is found. This involves some CPU overhead
but provides a guarantee that given hashsum is available. Also, chunker
will reject a server-side copy or move operation if source and
destination hashsum types are different resulting in the extra network
bandwidth, too. In some rare cases this may be undesired, so chunker
provides two optional choices: sha1quick and md5quick. If the source
does not support primary hash type and the quick mode is enabled,
chunker will try to fall back to the secondary type. This will save CPU
and bandwidth but can result in empty hashsums at destination. Beware of
consequences: the sync command will revert (sometimes silently) to
time/size comparison if compatible hashsums between source and target
are not found.

Modification times

Chunker stores modification times using the wrapped remote so support
depends on that. For a small non-chunked file the chunker overlay simply
manipulates modification time of the wrapped remote file. For a
composite file with metadata chunker will get and set modification time
of the metadata object on the wrapped remote. If file is chunked but
metadata format is none then chunker will use modification time of the
first data chunk.

Migrations

The idiomatic way to migrate to a different chunk size, hash type,
transaction style or chunk naming scheme is to:

-   Collect all your chunked files under a directory and have your
    chunker remote point to it.
-   Create another directory (most probably on the same cloud storage)
    and configure a new remote with desired metadata format, hash type,
    chunk naming etc.
-   Now run rclone sync --interactive oldchunks: newchunks: and all your
    data will be transparently converted in transfer. This may take some
    time, yet chunker will try server-side copy if possible.
-   After checking data integrity you may remove configuration section
    of the old remote.

If rclone gets killed during a long operation on a big composite file,
hidden temporary chunks may stay in the directory. They will not be
shown by the list command but will eat up your account quota. Please
note that the deletefile command deletes only active chunks of a file.
As a workaround, you can use remote of the wrapped file system to see
them. An easy way to get rid of hidden garbage is to copy littered
directory somewhere using the chunker remote and purge the original
directory. The copy command will copy only active chunks while the purge
will remove everything including garbage.

Caveats and Limitations

Chunker requires wrapped remote to support server-side move (or copy +
delete) operations, otherwise it will explicitly refuse to start. This
is because it internally renames temporary chunk files to their final
names when an operation completes successfully.

Chunker encodes chunk number in file name, so with default name_format
setting it adds 17 characters. Also chunker adds 7 characters of
temporary suffix during operations. Many file systems limit base file
name without path by 255 characters. Using rclone's crypt remote as a
base file system limits file name by 143 characters. Thus, maximum name
length is 231 for most files and 119 for chunker-over-crypt. A user in
need can change name format to e.g. *.rcc## and save 10 characters
(provided at most 99 chunks per file).

Note that a move implemented using the copy-and-delete method may incur
double charging with some cloud storage providers.

Chunker will not automatically rename existing chunks when you run
rclone config on a live remote and change the chunk name format. Beware
that in result of this some files which have been treated as chunks
before the change can pop up in directory listings as normal files and
vice versa. The same warning holds for the chunk size. If you
desperately need to change critical chunking settings, you should run
data migration as described above.

If wrapped remote is case insensitive, the chunker overlay will inherit
that property (so you can't have a file called "Hello.doc" and
"hello.doc" in the same directory).

Chunker included in rclone releases up to v1.54 can sometimes fail to
detect metadata produced by recent versions of rclone. We recommend
users to keep rclone up-to-date to avoid data corruption.

Changing transactions is dangerous and requires explicit migration.

Standard options

Here are the Standard options specific to chunker (Transparently
chunk/split large files).

--chunker-remote

Remote to chunk/unchunk.

Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
"myremote:bucket" or maybe "myremote:" (not recommended).

Properties:

-   Config: remote
-   Env Var: RCLONE_CHUNKER_REMOTE
-   Type: string
-   Required: true

--chunker-chunk-size

Files larger than chunk size will be split in chunks.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_CHUNKER_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 2Gi

--chunker-hash-type

Choose how chunker handles hash sums.

All modes but "none" require metadata.

Properties:

-   Config: hash_type
-   Env Var: RCLONE_CHUNKER_HASH_TYPE
-   Type: string
-   Default: "md5"
-   Examples:
    -   "none"
        -   Pass any hash supported by wrapped remote for non-chunked
            files.
        -   Return nothing otherwise.
    -   "md5"
        -   MD5 for composite files.
    -   "sha1"
        -   SHA1 for composite files.
    -   "md5all"
        -   MD5 for all files.
    -   "sha1all"
        -   SHA1 for all files.
    -   "md5quick"
        -   Copying a file to chunker will request MD5 from the source.
        -   Falling back to SHA1 if unsupported.
    -   "sha1quick"
        -   Similar to "md5quick" but prefers SHA1 over MD5.

Advanced options

Here are the Advanced options specific to chunker (Transparently
chunk/split large files).

--chunker-name-format

String format of chunk file names.

The two placeholders are: base file name (*) and chunk number (#...).
There must be one and only one asterisk and one or more consecutive hash
characters. If chunk number has less digits than the number of hashes,
it is left-padded by zeros. If there are more digits in the number, they
are left as is. Possible chunk files are ignored if their name does not
match given format.

Properties:

-   Config: name_format
-   Env Var: RCLONE_CHUNKER_NAME_FORMAT
-   Type: string
-   Default: "*.rclone_chunk.###"

--chunker-start-from

Minimum valid chunk number. Usually 0 or 1.

By default chunk numbers start from 1.

Properties:

-   Config: start_from
-   Env Var: RCLONE_CHUNKER_START_FROM
-   Type: int
-   Default: 1

--chunker-meta-format

Format of the metadata object or "none".

By default "simplejson". Metadata is a small JSON file named after the
composite file.

Properties:

-   Config: meta_format
-   Env Var: RCLONE_CHUNKER_META_FORMAT
-   Type: string
-   Default: "simplejson"
-   Examples:
    -   "none"
        -   Do not use metadata files at all.
        -   Requires hash type "none".
    -   "simplejson"
        -   Simple JSON supports hash sums and chunk validation.
        -   
        -   It has the following fields: ver, size, nchunks, md5, sha1.

--chunker-fail-hard

Choose how chunker should handle files with missing or invalid chunks.

Properties:

-   Config: fail_hard
-   Env Var: RCLONE_CHUNKER_FAIL_HARD
-   Type: bool
-   Default: false
-   Examples:
    -   "true"
        -   Report errors and abort current command.
    -   "false"
        -   Warn user, skip incomplete file and proceed.

--chunker-transactions

Choose how chunker should handle temporary files during transactions.

Properties:

-   Config: transactions
-   Env Var: RCLONE_CHUNKER_TRANSACTIONS
-   Type: string
-   Default: "rename"
-   Examples:
    -   "rename"
        -   Rename temporary files after a successful transaction.
    -   "norename"
        -   Leave temporary file names and write transaction ID to
            metadata file.
        -   Metadata is required for no rename transactions (meta format
            cannot be "none").
        -   If you are using norename transactions you should be careful
            not to downgrade Rclone
        -   as older versions of Rclone don't support this transaction
            style and will misinterpret
        -   files manipulated by norename transactions.
        -   This method is EXPERIMENTAL, don't use on production
            systems.
    -   "auto"
        -   Rename or norename will be used depending on capabilities of
            the backend.
        -   If meta format is set to "none", rename transactions will
            always be used.
        -   This method is EXPERIMENTAL, don't use on production
            systems.

--chunker-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_CHUNKER_DESCRIPTION
-   Type: string
-   Required: false

Cloudinary

This is a backend for the Cloudinary platform

About Cloudinary

Cloudinary is an image and video API platform. Trusted by 1.5 million
developers and 10,000 enterprise and hyper-growth companies as a
critical part of their tech stack to deliver visually engaging
experiences.

Accounts & Pricing

To use this backend, you need to create a free account on Cloudinary.
Start with a free plan with generous usage limits. Then, as your
requirements grow, upgrade to a plan that best fits your needs. See the
pricing details.

Securing Your Credentials

Please refer to the docs

Configuration

Here is an example of making a Cloudinary configuration.

First, create a cloudinary.com account and choose a plan.

You will need to log in and get the API Key and API Secret for your
account from the developer section.

Now run

    rclone config

Follow the interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter the name for the new remote.
    name> cloudinary-media-library

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / cloudinary.com
    \ (cloudinary)
    [snip]
    Storage> cloudinary

    Option cloud_name.
    You can find your cloudinary.com cloud_name in your [dashboard](https://console.cloudinary.com/pm/developer-dashboard)
    Enter a value.
    cloud_name> ****************************

    Option api_key.
    You can find your cloudinary.com api key in your [dashboard](https://console.cloudinary.com/pm/developer-dashboard)
    Enter a value.
    api_key> ****************************

    Option api_secret.
    You can find your cloudinary.com api secret in your [dashboard](https://console.cloudinary.com/pm/developer-dashboard)
    This value must be a single character, one of the following: y, g.
    y/g> y
    Enter a value.
    api_secret> ****************************

    Option upload_prefix.
    [Upload prefix](https://cloudinary.com/documentation/cloudinary_sdks#configuration_parameters) to specify alternative data center
    Enter a value.
    upload_prefix>

    Option upload_preset.
    [Upload presets](https://cloudinary.com/documentation/upload_presets) can be defined for different upload profiles
    Enter a value.
    upload_preset>

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: cloudinary
    - api_key: ****************************
    - api_secret: ****************************
    - cloud_name: ****************************
    - upload_prefix:
    - upload_preset:

    Keep this "cloudinary-media-library" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

List directories in the top level of your Media Library

    rclone lsd cloudinary-media-library:

Make a new directory.

    rclone mkdir cloudinary-media-library:directory

List the contents of a directory.

    rclone ls cloudinary-media-library:directory

Modified time and hashes

Cloudinary stores md5 and timestamps for any successful Put
automatically and read-only.

Standard options

Here are the Standard options specific to cloudinary (Cloudinary).

--cloudinary-cloud-name

Cloudinary Environment Name

Properties:

-   Config: cloud_name
-   Env Var: RCLONE_CLOUDINARY_CLOUD_NAME
-   Type: string
-   Required: true

--cloudinary-api-key

Cloudinary API Key

Properties:

-   Config: api_key
-   Env Var: RCLONE_CLOUDINARY_API_KEY
-   Type: string
-   Required: true

--cloudinary-api-secret

Cloudinary API Secret

Properties:

-   Config: api_secret
-   Env Var: RCLONE_CLOUDINARY_API_SECRET
-   Type: string
-   Required: true

--cloudinary-upload-prefix

Specify the API endpoint for environments out of the US

Properties:

-   Config: upload_prefix
-   Env Var: RCLONE_CLOUDINARY_UPLOAD_PREFIX
-   Type: string
-   Required: false

--cloudinary-upload-preset

Upload Preset to select asset manipulation on upload

Properties:

-   Config: upload_preset
-   Env Var: RCLONE_CLOUDINARY_UPLOAD_PRESET
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to cloudinary (Cloudinary).

--cloudinary-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_CLOUDINARY_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Question,Asterisk,Pipe,Hash,Percent,BackSlash,Del,Ctl,RightSpace,InvalidUtf8,Dot

--cloudinary-eventually-consistent-delay

Wait N seconds for eventual consistency of the databases that support
the backend operation

Properties:

-   Config: eventually_consistent_delay
-   Env Var: RCLONE_CLOUDINARY_EVENTUALLY_CONSISTENT_DELAY
-   Type: Duration
-   Default: 0s

--cloudinary-adjust-media-files-extensions

Cloudinary handles media formats as a file attribute and strips it from
the name, which is unlike most other file systems

Properties:

-   Config: adjust_media_files_extensions
-   Env Var: RCLONE_CLOUDINARY_ADJUST_MEDIA_FILES_EXTENSIONS
-   Type: bool
-   Default: true

--cloudinary-media-extensions

Cloudinary supported media extensions

Properties:

-   Config: media_extensions
-   Env Var: RCLONE_CLOUDINARY_MEDIA_EXTENSIONS
-   Type: stringArray
-   Default: [3ds 3g2 3gp ai arw avi avif bmp bw cr2 cr3 djvu dng eps3
    fbx flif flv gif glb gltf hdp heic heif ico indd jp2 jpe jpeg jpg
    jxl jxr m2ts mov mp4 mpeg mts mxf obj ogv pdf ply png psd svg tga
    tif tiff ts u3ma usdz wdp webm webp wmv]

--cloudinary-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_CLOUDINARY_DESCRIPTION
-   Type: string
-   Required: false

Citrix ShareFile

Citrix ShareFile is a secure file sharing and transfer service aimed as
business.

Configuration

The initial setup for Citrix ShareFile involves getting a token from
Citrix ShareFile which you can in your browser. rclone config walks you
through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    XX / Citrix Sharefile
       \ "sharefile"
    Storage> sharefile
    ** See help for sharefile backend at: https://rclone.org/sharefile/ **

    ID of the root folder

    Leave blank to access "Personal Folders".  You can use one of the
    standard values here or any folder ID (long hex number ID).
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Access the Personal Folders. (Default)
       \ ""
     2 / Access the Favorites folder.
       \ "favorites"
     3 / Access all the shared folders.
       \ "allshared"
     4 / Access all the individual connectors.
       \ "connectors"
     5 / Access the home, favorites, and shared folders as well as the connectors.
       \ "top"
    root_folder_id> 
    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> n
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth?state=XXX
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: sharefile
    - endpoint: https://XXX.sharefile.com
    - token: {"access_token":"XXX","token_type":"bearer","refresh_token":"XXX","expiry":"2019-09-30T19:41:45.878561877+01:00"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Citrix ShareFile. This only runs from the moment
it opens your browser to the moment you get back the verification code.
This is on http://127.0.0.1:53682/ and this it may require you to
unblock it temporarily if you are running a host firewall.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your ShareFile

    rclone lsd remote:

List all the files in your ShareFile

    rclone ls remote:

To copy a local directory to an ShareFile directory called backup

    rclone copy /home/source remote:backup

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Modification times and hashes

ShareFile allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not.

ShareFile supports MD5 type hashes, so you can use the --checksum flag.

Transfers

For files above 128 MiB rclone will use a chunked transfer. Rclone will
upload up to --transfers chunks at the same time (shared among all the
multipart uploads). Chunks are buffered in memory and are normally 64
MiB so increasing --transfers will increase memory use.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼
  *            0x2A        ＊
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  :            0x3A        ：
  |            0x7C        ｜
  "            0x22        ＂

File names can also not start or end with the following characters.
These only get replaced if they are the first or last character in the
name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠
  .            0x2E        ．

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to sharefile (Citrix Sharefile).

--sharefile-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_SHAREFILE_CLIENT_ID
-   Type: string
-   Required: false

--sharefile-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_SHAREFILE_CLIENT_SECRET
-   Type: string
-   Required: false

--sharefile-root-folder-id

ID of the root folder.

Leave blank to access "Personal Folders". You can use one of the
standard values here or any folder ID (long hex number ID).

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_SHAREFILE_ROOT_FOLDER_ID
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   Access the Personal Folders (default).
    -   "favorites"
        -   Access the Favorites folder.
    -   "allshared"
        -   Access all the shared folders.
    -   "connectors"
        -   Access all the individual connectors.
    -   "top"
        -   Access the home, favorites, and shared folders as well as
            the connectors.

Advanced options

Here are the Advanced options specific to sharefile (Citrix Sharefile).

--sharefile-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_SHAREFILE_TOKEN
-   Type: string
-   Required: false

--sharefile-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_SHAREFILE_AUTH_URL
-   Type: string
-   Required: false

--sharefile-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_SHAREFILE_TOKEN_URL
-   Type: string
-   Required: false

--sharefile-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_SHAREFILE_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--sharefile-upload-cutoff

Cutoff for switching to multipart upload.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_SHAREFILE_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 128Mi

--sharefile-chunk-size

Upload chunk size.

Must a power of 2 >= 256k.

Making this larger will improve performance, but note that each chunk is
buffered in memory one per transfer.

Reducing this will reduce memory usage but decrease performance.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_SHAREFILE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 64Mi

--sharefile-endpoint

Endpoint for API calls.

This is usually auto discovered as part of the oauth process, but can be
set manually to something like: https://XXX.sharefile.com

Properties:

-   Config: endpoint
-   Env Var: RCLONE_SHAREFILE_ENDPOINT
-   Type: string
-   Required: false

--sharefile-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_SHAREFILE_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,LeftSpace,LeftPeriod,RightSpace,RightPeriod,InvalidUtf8,Dot

--sharefile-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SHAREFILE_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Note that ShareFile is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

ShareFile only supports filenames up to 256 characters in length.

rclone about is not supported by the Citrix ShareFile backend. Backends
without this capability cannot determine free space for an rclone mount
or use policy mfs (most free space) as a member of an rclone union
remote.

See List of backends that do not support rclone about and rclone about.

Crypt

Rclone crypt remotes encrypt and decrypt other remotes.

A remote of type crypt does not access a storage system directly, but
instead wraps another remote, which in turn accesses the storage system.
This is similar to how alias, union, chunker and a few others work. It
makes the usage very flexible, as you can add a layer, in this case an
encryption layer, on top of any other backend, even in multiple layers.
Rclone's functionality can be used as with any other remote, for example
you can mount a crypt remote.

Accessing a storage system through a crypt remote realizes client-side
encryption, which makes it safe to keep your data in a location you do
not trust will not get compromised. When working against the crypt
remote, rclone will automatically encrypt (before uploading) and decrypt
(after downloading) on your local system as needed on the fly, leaving
the data encrypted at rest in the wrapped remote. If you access the
storage system using an application other than rclone, or access the
wrapped remote directly using rclone, there will not be any
encryption/decryption: Downloading existing content will just give you
the encrypted (scrambled) format, and anything you upload will not
become encrypted.

The encryption is a secret-key encryption (also called symmetric key
encryption) algorithm, where a password (or pass phrase) is used to
generate real encryption key. The password can be supplied by user, or
you may chose to let rclone generate one. It will be stored in the
configuration file, in a lightly obscured form. If you are in an
environment where you are not able to keep your configuration secured,
you should add configuration encryption as protection. As long as you
have this configuration file, you will be able to decrypt your data.
Without the configuration file, as long as you remember the password (or
keep it in a safe place), you can re-create the configuration and gain
access to the existing data. You may also configure a corresponding
remote in a different installation to access the same data. See below
for guidance to changing password.

Encryption uses cryptographic salt, to permute the encryption key so
that the same string may be encrypted in different ways. When
configuring the crypt remote it is optional to enter a salt, or to let
rclone generate a unique salt. If omitted, rclone uses a built-in unique
string. Normally in cryptography, the salt is stored together with the
encrypted content, and do not have to be memorized by the user. This is
not the case in rclone, because rclone does not store any additional
information on the remotes. Use of custom salt is effectively a second
password that must be memorized.

File content encryption is performed using NaCl SecretBox, based on
XSalsa20 cipher and Poly1305 for integrity. Names (file- and directory
names) are also encrypted by default, but this has some implications and
is therefore possible to be turned off.

Configuration

Here is an example of how to make a remote called secret.

To use crypt, first set up the underlying remote. Follow the
rclone config instructions for the specific backend.

Before configuring the crypt remote, check the underlying remote is
working. In this example the underlying remote is called remote. We will
configure a path path within this remote to contain the encrypted
content. Anything inside remote:path will be encrypted and anything
outside will not.

Configure crypt using rclone config. In this example the crypt remote is
called secret, to differentiate it from the underlying remote.

When you are done you can use the crypt remote named secret just as you
would with any other remote, e.g. rclone copy D:\docs secret:\docs, and
rclone will encrypt and decrypt as needed on the fly. If you access the
wrapped remote remote:path directly you will bypass the encryption, and
anything you read will be in encrypted form, and anything you write will
be unencrypted. To avoid issues it is best to configure a dedicated path
for encrypted content, and access it exclusively through a crypt remote.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> secret
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Encrypt/Decrypt a remote
       \ "crypt"
    [snip]
    Storage> crypt
    ** See help for crypt backend at: https://rclone.org/crypt/ **

    Remote to encrypt/decrypt.
    Normally should contain a ':' and a path, eg "myremote:path/to/dir",
    "myremote:bucket" or maybe "myremote:" (not recommended).
    Enter a string value. Press Enter for the default ("").
    remote> remote:path
    How to encrypt the filenames.
    Enter a string value. Press Enter for the default ("standard").
    Choose a number from below, or type in your own value.
       / Encrypt the filenames.
     1 | See the docs for the details.
       \ "standard"
     2 / Very simple filename obfuscation.
       \ "obfuscate"
       / Don't encrypt the file names.
     3 | Adds a ".bin" extension only.
       \ "off"
    filename_encryption>
    Option to either encrypt directory names or leave them intact.

    NB If filename_encryption is "off" then this option will do nothing.
    Enter a boolean value (true or false). Press Enter for the default ("true").
    Choose a number from below, or type in your own value
     1 / Encrypt directory names.
       \ "true"
     2 / Don't encrypt directory names, leave them intact.
       \ "false"
    directory_name_encryption>
    Password or pass phrase for encryption.
    y) Yes type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Password or pass phrase for salt. Optional but recommended.
    Should be different to the previous password.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank (default)
    y/g/n> g
    Password strength in bits.
    64 is just about memorable
    128 is secure
    1024 is the maximum
    Bits> 128
    Your password is: JAsJvRcgR-_veXNfy_sGmQ
    Use this password? Please note that an obscured version of this
    password (and not the password itself) will be stored under your
    configuration file, so keep this generated password in a safe place.
    y) Yes (default)
    n) No
    y/n>
    Edit advanced config? (y/n)
    y) Yes
    n) No (default)
    y/n>
    Remote config
    --------------------
    [secret]
    type = crypt
    remote = remote:path
    password = *** ENCRYPTED ***
    password2 = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d>

Important The crypt password stored in rclone.conf is lightly obscured.
That only protects it from cursory inspection. It is not secure unless
configuration encryption of rclone.conf is specified.

A long passphrase is recommended, or rclone config can generate a random
one.

The obscured password is created using AES-CTR with a static key. The IV
(nonce) is stored verbatim at the beginning of the obscured password.
This static key is shared between all versions of rclone.

If you reconfigure rclone with the same passwords/passphrases elsewhere
it will be compatible, but the obscured version will be different due to
the different salt.

Rclone does not encrypt

-   file length - this can be calculated within 16 bytes
-   modification time - used for syncing

Specifying the remote

When configuring the remote to encrypt/decrypt, you may specify any
string that rclone accepts as a source/destination of other commands.

The primary use case is to specify the path into an already configured
remote (e.g. remote:path/to/dir or remote:bucket), such that data in a
remote untrusted location can be stored encrypted.

You may also specify a local filesystem path, such as /path/to/dir on
Linux, C:\path\to\dir on Windows. By creating a crypt remote pointing to
such a local filesystem path, you can use rclone as a utility for pure
local file encryption, for example to keep encrypted files on a
removable USB drive.

Note: A string which do not contain a : will by rclone be treated as a
relative path in the local filesystem. For example, if you enter the
name remote without the trailing :, it will be treated as a subdirectory
of the current directory with name "remote".

If a path remote:path/to/dir is specified, rclone stores encrypted files
in path/to/dir on the remote. With file name encryption, files saved to
secret:subdir/subfile are stored in the unencrypted path path/to/dir but
the subdir/subpath element is encrypted.

The path you specify does not have to exist, rclone will create it when
needed.

If you intend to use the wrapped remote both directly for keeping
unencrypted content, as well as through a crypt remote for encrypted
content, it is recommended to point the crypt remote to a separate
directory within the wrapped remote. If you use a bucket-based storage
system (e.g. Swift, S3, Google Compute Storage, B2) it is generally
advisable to wrap the crypt remote around a specific bucket (s3:bucket).
If wrapping around the entire root of the storage (s3:), and use the
optional file name encryption, rclone will encrypt the bucket name.

Changing password

Should the password, or the configuration file containing a lightly
obscured form of the password, be compromised, you need to re-encrypt
your data with a new password. Since rclone uses secret-key encryption,
where the encryption key is generated directly from the password kept on
the client, it is not possible to change the password/key of already
encrypted content. Just changing the password configured for an existing
crypt remote means you will no longer able to decrypt any of the
previously encrypted content. The only possibility is to re-upload
everything via a crypt remote configured with your new password.

Depending on the size of your data, your bandwidth, storage quota etc,
there are different approaches you can take:

-   If you have everything in a different location, for example on your
    local system, you could remove all of the prior encrypted files,
    change the password for your configured crypt remote (or delete and
    re-create the crypt configuration), and then re-upload everything
    from the alternative location.
-   If you have enough space on the storage system you can create a new
    crypt remote pointing to a separate directory on the same backend,
    and then use rclone to copy everything from the original crypt
    remote to the new, effectively decrypting everything on the fly
    using the old password and re-encrypting using the new password.
    When done, delete the original crypt remote directory and finally
    the rclone crypt configuration with the old password. All data will
    be streamed from the storage system and back, so you will get half
    the bandwidth and be charged twice if you have upload and download
    quota on the storage system.

Note: A security problem related to the random password generator was
fixed in rclone version 1.53.3 (released 2020-11-19). Passwords
generated by rclone config in version 1.49.0 (released 2019-08-26) to
1.53.2 (released 2020-10-26) are not considered secure and should be
changed. If you made up your own password, or used rclone version older
than 1.49.0 or newer than 1.53.2 to generate it, you are not affected by
this issue. See issue #4783 for more details, and a tool you can use to
check if you are affected.

Example

Create the following file structure using "standard" file name
encryption.

    plaintext/
    ├── file0.txt
    ├── file1.txt
    └── subdir
        ├── file2.txt
        ├── file3.txt
        └── subsubdir
            └── file4.txt

Copy these to the remote, and list them

    $ rclone -q copy plaintext secret:
    $ rclone -q ls secret:
            7 file1.txt
            6 file0.txt
            8 subdir/file2.txt
           10 subdir/subsubdir/file4.txt
            9 subdir/file3.txt

The crypt remote looks like

    $ rclone -q ls remote:path
           55 hagjclgavj2mbiqm6u6cnjjqcg
           54 v05749mltvv1tf4onltun46gls
           57 86vhrsv86mpbtd3a0akjuqslj8/dlj7fkq4kdq72emafg7a7s41uo
           58 86vhrsv86mpbtd3a0akjuqslj8/7uu829995du6o42n32otfhjqp4/b9pausrfansjth5ob3jkdqd4lc
           56 86vhrsv86mpbtd3a0akjuqslj8/8njh1sk437gttmep3p70g81aps

The directory structure is preserved

    $ rclone -q ls secret:subdir
            8 file2.txt
            9 file3.txt
           10 subsubdir/file4.txt

Without file name encryption .bin extensions are added to underlying
names. This prevents the cloud provider attempting to interpret file
content.

    $ rclone -q ls remote:path
           54 file0.txt.bin
           57 subdir/file3.txt.bin
           56 subdir/file2.txt.bin
           58 subdir/subsubdir/file4.txt.bin
           55 file1.txt.bin

File name encryption modes

Off

-   doesn't hide file names or directory structure
-   allows for longer file names (~246 characters)
-   can use sub paths and copy single files

Standard

-   file names encrypted
-   file names can't be as long (~143 characters)
-   can use sub paths and copy single files
-   directory structure visible
-   identical files names will have identical uploaded names
-   can use shortcuts to shorten the directory recursion

Obfuscation

This is a simple "rotate" of the filename, with each file having a rot
distance based on the filename. Rclone stores the distance at the
beginning of the filename. A file called "hello" may become "53.jgnnq".

Obfuscation is not a strong encryption of filenames, but hinders
automated scanning tools picking up on filename patterns. It is an
intermediate between "off" and "standard" which allows for longer path
segment names.

There is a possibility with some unicode based filenames that the
obfuscation is weak and may map lower case characters to upper case
equivalents.

Obfuscation cannot be relied upon for strong protection.

-   file names very lightly obfuscated
-   file names can be longer than standard encryption
-   can use sub paths and copy single files
-   directory structure visible
-   identical files names will have identical uploaded names

Cloud storage systems have limits on file name length and total path
length which rclone is more likely to breach using "Standard" file name
encryption. Where file names are 143 or fewer characters in length
issues should not be encountered, irrespective of cloud storage
provider.

An experimental advanced option filename_encoding is now provided to
address this problem to a certain degree. For cloud storage systems with
case sensitive file names (e.g. Google Drive), base64 can be used to
reduce file name length. For cloud storage systems using UTF-16 to store
file names internally (e.g. OneDrive, Dropbox, Box), base32768 can be
used to drastically reduce file name length.

An alternative, future rclone file name encryption mode may tolerate
backend provider path length limits.

Directory name encryption

Crypt offers the option of encrypting dir names or leaving them intact.
There are two options:

True

Encrypts the whole file path including directory names Example:
1/12/123.txt is encrypted to
p0e52nreeaj0a5ea7s64m4j72s/l42g6771hnv3an9cgc8cr2n1ng/qgm4avr35m5loi1th53ato71v0

False

Only encrypts file names, skips directory names Example: 1/12/123.txt is
encrypted to 1/12/qgm4avr35m5loi1th53ato71v0

Modification times and hashes

Crypt stores modification times using the underlying remote so support
depends on that.

Hashes are not stored for crypt. However the data integrity is protected
by an extremely strong crypto authenticator.

Use the rclone cryptcheck command to check the integrity of an encrypted
remote instead of rclone check which can't check the checksums properly.

Standard options

Here are the Standard options specific to crypt (Encrypt/Decrypt a
remote).

--crypt-remote

Remote to encrypt/decrypt.

Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
"myremote:bucket" or maybe "myremote:" (not recommended).

Properties:

-   Config: remote
-   Env Var: RCLONE_CRYPT_REMOTE
-   Type: string
-   Required: true

--crypt-filename-encryption

How to encrypt the filenames.

Properties:

-   Config: filename_encryption
-   Env Var: RCLONE_CRYPT_FILENAME_ENCRYPTION
-   Type: string
-   Default: "standard"
-   Examples:
    -   "standard"
        -   Encrypt the filenames.
        -   See the docs for the details.
    -   "obfuscate"
        -   Very simple filename obfuscation.
    -   "off"
        -   Don't encrypt the file names.
        -   Adds a ".bin", or "suffix" extension only.

--crypt-directory-name-encryption

Option to either encrypt directory names or leave them intact.

NB If filename_encryption is "off" then this option will do nothing.

Properties:

-   Config: directory_name_encryption
-   Env Var: RCLONE_CRYPT_DIRECTORY_NAME_ENCRYPTION
-   Type: bool
-   Default: true
-   Examples:
    -   "true"
        -   Encrypt directory names.
    -   "false"
        -   Don't encrypt directory names, leave them intact.

--crypt-password

Password or pass phrase for encryption.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_CRYPT_PASSWORD
-   Type: string
-   Required: true

--crypt-password2

Password or pass phrase for salt.

Optional but recommended. Should be different to the previous password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password2
-   Env Var: RCLONE_CRYPT_PASSWORD2
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to crypt (Encrypt/Decrypt a
remote).

--crypt-server-side-across-configs

Deprecated: use --server-side-across-configs instead.

Allow server-side operations (e.g. copy) to work across different crypt
configs.

Normally this option is not what you want, but if you have two crypts
pointing to the same backend you can use it.

This can be used, for example, to change file name encryption type
without re-uploading all the data. Just make two crypt backends pointing
to two different directories with the single changed parameter and use
rclone move to move the files between the crypt remotes.

Properties:

-   Config: server_side_across_configs
-   Env Var: RCLONE_CRYPT_SERVER_SIDE_ACROSS_CONFIGS
-   Type: bool
-   Default: false

--crypt-show-mapping

For all files listed show how the names encrypt.

If this flag is set then for each file that the remote is asked to list,
it will log (at level INFO) a line stating the decrypted file name and
the encrypted file name.

This is so you can work out which encrypted names are which decrypted
names just in case you need to do something with the encrypted file
names, or for debugging purposes.

Properties:

-   Config: show_mapping
-   Env Var: RCLONE_CRYPT_SHOW_MAPPING
-   Type: bool
-   Default: false

--crypt-no-data-encryption

Option to either encrypt file data or leave it unencrypted.

Properties:

-   Config: no_data_encryption
-   Env Var: RCLONE_CRYPT_NO_DATA_ENCRYPTION
-   Type: bool
-   Default: false
-   Examples:
    -   "true"
        -   Don't encrypt file data, leave it unencrypted.
    -   "false"
        -   Encrypt file data.

--crypt-pass-bad-blocks

If set this will pass bad blocks through as all 0.

This should not be set in normal operation, it should only be set if
trying to recover an encrypted file with errors and it is desired to
recover as much of the file as possible.

Properties:

-   Config: pass_bad_blocks
-   Env Var: RCLONE_CRYPT_PASS_BAD_BLOCKS
-   Type: bool
-   Default: false

--crypt-strict-names

If set, this will raise an error when crypt comes across a filename that
can't be decrypted.

(By default, rclone will just log a NOTICE and continue as normal.) This
can happen if encrypted and unencrypted files are stored in the same
directory (which is not recommended.) It may also indicate a more
serious problem that should be investigated.

Properties:

-   Config: strict_names
-   Env Var: RCLONE_CRYPT_STRICT_NAMES
-   Type: bool
-   Default: false

--crypt-filename-encoding

How to encode the encrypted filename to text string.

This option could help with shortening the encrypted filename. The
suitable option would depend on the way your remote count the filename
length and if it's case sensitive.

Properties:

-   Config: filename_encoding
-   Env Var: RCLONE_CRYPT_FILENAME_ENCODING
-   Type: string
-   Default: "base32"
-   Examples:
    -   "base32"
        -   Encode using base32. Suitable for all remote.
    -   "base64"
        -   Encode using base64. Suitable for case sensitive remote.
    -   "base32768"
        -   Encode using base32768. Suitable if your remote counts
            UTF-16 or
        -   Unicode codepoint instead of UTF-8 byte length. (Eg.
            Onedrive, Dropbox)

--crypt-suffix

If this is set it will override the default suffix of ".bin".

Setting suffix to "none" will result in an empty suffix. This may be
useful when the path length is critical.

Properties:

-   Config: suffix
-   Env Var: RCLONE_CRYPT_SUFFIX
-   Type: string
-   Default: ".bin"

--crypt-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_CRYPT_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Any metadata supported by the underlying remote is read and written.

See the metadata docs for more info.

Backend commands

Here are the commands specific to the crypt backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

encode

Encode the given filename(s).

    rclone backend encode remote: [options] [<arguments>+]

This encodes the filenames given as arguments returning a list of
strings of the encoded results.

Usage examples:

    rclone backend encode crypt: file1 [file2...]
    rclone rc backend/command command=encode fs=crypt: file1 [file2...]

decode

Decode the given filename(s).

    rclone backend decode remote: [options] [<arguments>+]

This decodes the filenames given as arguments returning a list of
strings of the decoded results. It will return an error if any of the
inputs are invalid.

Usage examples:

    rclone backend decode crypt: encryptedfile1 [encryptedfile2...]
    rclone rc backend/command command=decode fs=crypt: encryptedfile1 [encryptedfile2...]

Backing up an encrypted remote

If you wish to backup an encrypted remote, it is recommended that you
use rclone sync on the encrypted files, and make sure the passwords are
the same in the new encrypted remote.

This will have the following advantages

-   rclone sync will check the checksums while copying
-   you can use rclone check between the encrypted remotes
-   you don't decrypt and encrypt unnecessarily

For example, let's say you have your original remote at remote: with the
encrypted version at eremote: with path remote:crypt. You would then set
up the new remote remote2: and then the encrypted version eremote2: with
path remote2:crypt using the same passwords as eremote:.

To sync the two remotes you would do

    rclone sync --interactive remote:crypt remote2:crypt

And to check the integrity you would do

    rclone check remote:crypt remote2:crypt

File formats

File encryption

Files are encrypted 1:1 source file to destination object. The file has
a header and is divided into chunks.

Header

-   8 bytes magic string RCLONE\x00\x00
-   24 bytes Nonce (IV)

The initial nonce is generated from the operating systems crypto strong
random number generator. The nonce is incremented for each chunk read
making sure each nonce is unique for each block written. The chance of a
nonce being reused is minuscule. If you wrote an exabyte of data (10¹⁸
bytes) you would have a probability of approximately 2×10⁻³² of reusing
a nonce.

Chunk

Each chunk will contain 64 KiB of data, except for the last one which
may have less data. The data chunk is in standard NaCl SecretBox format.
SecretBox uses XSalsa20 and Poly1305 to encrypt and authenticate
messages.

Each chunk contains:

-   16 Bytes of Poly1305 authenticator
-   1 - 65536 bytes XSalsa20 encrypted data

64k chunk size was chosen as the best performing chunk size (the
authenticator takes too much time below this and the performance drops
off due to cache effects above this). Note that these chunks are
buffered in memory so they can't be too big.

This uses a 32 byte (256 bit key) key derived from the user password.

Examples

1 byte file will encrypt to

-   32 bytes header
-   17 bytes data chunk

49 bytes total

1 MiB (1048576 bytes) file will encrypt to

-   32 bytes header
-   16 chunks of 65568 bytes

1049120 bytes total (a 0.05% overhead). This is the overhead for big
files.

Name encryption

File names are encrypted segment by segment - the path is broken up into
/ separated strings and these are encrypted individually.

File segments are padded using PKCS#7 to a multiple of 16 bytes before
encryption.

They are then encrypted with EME using AES with 256 bit key. EME
(ECB-Mix-ECB) is a wide-block encryption mode presented in the 2003
paper "A Parallelizable Enciphering Mode" by Halevi and Rogaway.

This makes for deterministic encryption which is what we want - the same
filename must encrypt to the same thing otherwise we can't find it on
the cloud storage system.

This means that

-   filenames with the same name will encrypt the same
-   filenames which start the same won't have a common prefix

This uses a 32 byte key (256 bits) and a 16 byte (128 bits) IV both of
which are derived from the user password.

After encryption they are written out using a modified version of
standard base32 encoding as described in RFC4648. The standard encoding
is modified in two ways:

-   it becomes lower case (no-one likes upper case filenames!)
-   we strip the padding character =

base32 is used rather than the more efficient base64 so rclone can be
used on case insensitive remotes (e.g. Windows, Box, Dropbox, Onedrive
etc).

Key derivation

Rclone uses scrypt with parameters N=16384, r=8, p=1 with an optional
user supplied salt (password2) to derive the 32+32+16 = 80 bytes of key
material required. If the user doesn't supply a salt then rclone uses an
internal one.

scrypt makes it impractical to mount a dictionary attack on rclone
encrypted data. For full protection against this you should always use a
salt.

See Also

-   rclone cryptdecode - Show forward/reverse mapping of encrypted
    filenames.

Compress

Warning

This remote is currently experimental. Things may break and data may be
lost. Anything you do with this remote is at your own risk. Please
understand the risks associated with using experimental code and don't
use this remote in critical applications.

The Compress remote adds compression to another remote. It is best used
with remotes containing many large compressible files.

Configuration

To use this remote, all you need to do is specify another remote and a
compression mode to use:

    $ rclone config
    Current remotes:

    Name                 Type
    ====                 ====
    remote_to_press      sometype

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> n
    name> compress

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    ...
    12 / Compress a remote
       \ (compress)
    ...
    Storage> compress

    Option remote.
    Remote to compress.
    Enter a value.
    remote> remote_to_press:subdir 

    Option mode.
    Compression mode.
    Choose a number from below, or type in your own value of type string.
    Press Enter for the default (gzip).
     1 / Standard gzip compression with fastest parameters.
       \ (gzip)
     2 / Zstandard compression — fast modern algorithm offering adjustable speed-to-compression tradeoffs.
       \ (zstd)
    mode> gzip

    Option level.
    GZIP (levels -2 to 9):
    - -2 — Huffman encoding only. Only use if you know what you're doing.
    - -1 (default) — recommended; equivalent to level 5.
    - 0 — turns off compression.
    - 1–9 — increase compression at the cost of speed. Going past 6 generally offers very little return.
     
    ZSTD (levels 0 to 4):
    - 0 — turns off compression entirely.
    - 1 — fastest compression with the lowest ratio.
    - 2 (default) — good balance of speed and compression.
    - 3 — better compression, but uses about 2–3x more CPU than the default.
    - 4 — best possible compression ratio (highest CPU cost).
     
    Notes:
    - Choose GZIP for wide compatibility; ZSTD for better speed/ratio tradeoffs.
    - Negative gzip levels: -2 = Huffman-only, -1 = default (≈ level 5).
    Enter a value.
    level> -1

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: compress
    - remote: remote_to_press:subdir
    - mode: gzip
    - level: -1
    Keep this "compress" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Compression Algorithms

-   GZIP – a well-established and widely adopted algorithm that strikes
    a solid balance between compression speed and ratio. It supports
    compression levels from -2 to 9, with the default -1 (roughly
    equivalent to level 5) offering an effective middle ground for most
    scenarios.

-   Zstandard (zstd) – a modern, high-performance algorithm that offers
    precise control over the trade-off between speed and compression
    efficiency. Compression levels range from 0 (no compression) to 4
    (maximum compression).

File types

If you open a remote wrapped by compress, you will see that there are
many files with an extension corresponding to the compression algorithm
you chose. These files are standard files that can be opened by various
archive programs, but they have some hidden metadata that allows them to
be used by rclone. While you may download and decompress these files at
will, do not manually delete or rename files. Files without correct
metadata files will not be recognized by rclone.

File names

The compressed files will be named *.###########.gz where * is the base
file and the # part is base64 encoded size of the uncompressed file. The
file names should not be changed by anything other than the rclone
compression backend.

Standard options

Here are the Standard options specific to compress (Compress a remote).

--compress-remote

Remote to compress.

Properties:

-   Config: remote
-   Env Var: RCLONE_COMPRESS_REMOTE
-   Type: string
-   Required: true

--compress-mode

Compression mode.

Properties:

-   Config: mode
-   Env Var: RCLONE_COMPRESS_MODE
-   Type: string
-   Default: "gzip"
-   Examples:
    -   "gzip"
        -   Standard gzip compression with fastest parameters.
    -   "zstd"
        -   Zstandard compression — fast modern algorithm offering
            adjustable speed-to-compression tradeoffs.

--compress-level

GZIP (levels -2 to 9): - -2 — Huffman encoding only. Only use if you
know what you're doing. - -1 (default) — recommended; equivalent to
level 5. - 0 — turns off compression. - 1–9 — increase compression at
the cost of speed. Going past 6 generally offers very little return.

ZSTD (levels 0 to 4): - 0 — turns off compression entirely. - 1 —
fastest compression with the lowest ratio. - 2 (default) — good balance
of speed and compression. - 3 — better compression, but uses about 2–3x
more CPU than the default. - 4 — best possible compression ratio
(highest CPU cost).

Notes: - Choose GZIP for wide compatibility; ZSTD for better speed/ratio
tradeoffs. - Negative gzip levels: -2 = Huffman-only, -1 = default (≈
level 5).

Properties:

-   Config: level
-   Env Var: RCLONE_COMPRESS_LEVEL
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to compress (Compress a remote).

--compress-ram-cache-limit

Some remotes don't allow the upload of files with unknown size. In this
case the compressed file will need to be cached to determine it's size.

Files smaller than this limit will be cached in RAM, files larger than
this limit will be cached on disk.

Properties:

-   Config: ram_cache_limit
-   Env Var: RCLONE_COMPRESS_RAM_CACHE_LIMIT
-   Type: SizeSuffix
-   Default: 20Mi

--compress-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_COMPRESS_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Any metadata supported by the underlying remote is read and written.

See the metadata docs for more info.

Combine

The combine backend joins remotes together into a single directory tree.

For example you might have a remote for images on one provider:

    $ rclone tree s3:imagesbucket
    /
    ├── image1.jpg
    └── image2.jpg

And a remote for files on another:

    $ rclone tree drive:important/files
    /
    ├── file1.txt
    └── file2.txt

The combine backend can join these together into a synthetic directory
structure like this:

    $ rclone tree combined:
    /
    ├── files
    │   ├── file1.txt
    │   └── file2.txt
    └── images
        ├── image1.jpg
        └── image2.jpg

You'd do this by specifying an upstreams parameter in the config like
this

    upstreams = images=s3:imagesbucket files=drive:important/files

During the initial setup with rclone config you will specify the
upstreams remotes as a space separated list. The upstream remotes can
either be a local paths or other remotes.

Configuration

Here is an example of how to make a combine called remote for the
example above. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    ...
    XX / Combine several remotes into one
       \ (combine)
    ...
    Storage> combine
    Option upstreams.
    Upstreams for combining
    These should be in the form
        dir=remote:path dir2=remote2:path
    Where before the = is specified the root directory and after is the remote to
    put there.
    Embedded spaces can be added using quotes
        "dir=remote:path with space" "dir2=remote2:path with space"
    Enter a fs.SpaceSepList value.
    upstreams> images=s3:imagesbucket files=drive:important/files
    Configuration complete.
    Options:
    - type: combine
    - upstreams: images=s3:imagesbucket files=drive:important/files
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Configuring for Google Drive Shared Drives

Rclone has a convenience feature for making a combine backend for all
the shared drives you have access to.

Assuming your main (non shared drive) Google drive remote is called
drive: you would run

    rclone backend -o config drives drive:

This would produce something like this:

    [My Drive]
    type = alias
    remote = drive,team_drive=0ABCDEF-01234567890,root_folder_id=:

    [Test Drive]
    type = alias
    remote = drive,team_drive=0ABCDEFabcdefghijkl,root_folder_id=:

    [AllDrives]
    type = combine
    upstreams = "My Drive=My Drive:" "Test Drive=Test Drive:"

If you then add that config to your config file (find it with
rclone config file) then you can access all the shared drives in one
place with the AllDrives: remote.

See the Google Drive docs for full info.

Standard options

Here are the Standard options specific to combine (Combine several
remotes into one).

--combine-upstreams

Upstreams for combining

These should be in the form

    dir=remote:path dir2=remote2:path

Where before the = is specified the root directory and after is the
remote to put there.

Embedded spaces can be added using quotes

    "dir=remote:path with space" "dir2=remote2:path with space"

Properties:

-   Config: upstreams
-   Env Var: RCLONE_COMBINE_UPSTREAMS
-   Type: SpaceSepList
-   Default:

Advanced options

Here are the Advanced options specific to combine (Combine several
remotes into one).

--combine-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_COMBINE_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Any metadata supported by the underlying remote is read and written.

See the metadata docs for more info.

DOI

The DOI remote is a read only remote for reading files from digital
object identifiers (DOI).

Currently, the DOI backend supports DOIs hosted with:

-   InvenioRDM
    -   Zenodo
    -   CaltechDATA
    -   Other InvenioRDM repositories
-   Dataverse
    -   Harvard Dataverse
    -   Other Dataverse repositories

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    Enter name for new remote.
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / DOI datasets
       \ (doi)
    [snip]
    Storage> doi
    Option doi.
    The DOI or the doi.org URL.
    Enter a value.
    doi> 10.5281/zenodo.5876941
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    Configuration complete.
    Options:
    - type: doi
    - doi: 10.5281/zenodo.5876941
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Standard options

Here are the Standard options specific to doi (DOI datasets).

--doi-doi

The DOI or the doi.org URL.

Properties:

-   Config: doi
-   Env Var: RCLONE_DOI_DOI
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to doi (DOI datasets).

--doi-provider

DOI provider.

The DOI provider can be set when rclone does not automatically recognize
a supported DOI provider.

Properties:

-   Config: provider
-   Env Var: RCLONE_DOI_PROVIDER
-   Type: string
-   Required: false
-   Examples:
    -   "auto"
        -   Auto-detect provider
    -   "zenodo"
        -   Zenodo
    -   "dataverse"
        -   Dataverse
    -   "invenio"
        -   Invenio

--doi-doi-resolver-api-url

The URL of the DOI resolver API to use.

The DOI resolver can be set for testing or for cases when the canonical
DOI resolver API cannot be used.

Defaults to "https://doi.org/api".

Properties:

-   Config: doi_resolver_api_url
-   Env Var: RCLONE_DOI_DOI_RESOLVER_API_URL
-   Type: string
-   Required: false

--doi-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_DOI_DESCRIPTION
-   Type: string
-   Required: false

Backend commands

Here are the commands specific to the doi backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

metadata

Show metadata about the DOI.

    rclone backend metadata remote: [options] [<arguments>+]

This command returns a JSON object with some information about the DOI.

Usage example:

    rclone backend metadata doi:

It returns a JSON object representing metadata about the DOI.

set

Set command for updating the config parameters.

    rclone backend set remote: [options] [<arguments>+]

This set command can be used to update the config parameters for a
running doi backend.

Usage examples:

    rclone backend set doi: [-o opt_name=opt_value] [-o opt_name2=opt_value2]
    rclone rc backend/command command=set fs=doi: [-o opt_name=opt_value] [-o opt_name2=opt_value2]
    rclone rc backend/command command=set fs=doi: -o doi=NEW_DOI

The option keys are named as they are in the config file.

This rebuilds the connection to the doi backend when it is called with
the new parameters. Only new parameters need be passed as the values
will default to those currently in use.

It doesn't return anything.

Drime

Drime is a cloud storage and transfer service focused on fast, resilient
file delivery. It offers both free and paid tiers with emphasis on
high-speed uploads and link sharing.

To setup Drime you need to log in, navigate to Settings, Developer, and
create a token to use as an API access key. Give it a sensible name and
copy the token for use in the config.

Configuration

Here is a run through of rclone config to make a remote called remote.

Firstly run:

    rclone config

Then follow through the interactive setup:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> remote

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    XX / Drime
       \ (drime)
    Storage> drime

    Option access_token.
    API Access token
    You can get this from the web control panel.
    Enter a value. Press Enter to leave empty.
    access_token> YOUR_API_ACCESS_TOKEN

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: drime
    - access_token: YOUR_API_ACCESS_TOKEN
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories and files in the top level of your Drime

    rclone lsf remote:

To copy a local directory to a Drime directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

Drime does not support modification times or hashes.

This means that by default syncs will only use the size of the file to
determine if it needs updating.

You can use the --update flag which will use the time the object was
uploaded. For many operations this is sufficient to determine if it has
changed. However files created with timestamps in the past will be
missed by the sync if using --update.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼

File names can also not start or end with the following characters.
These only get replaced if they are the first or last character in the
name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Root folder ID

You can set the root_folder_id for rclone. This is the directory
(identified by its Folder ID) that rclone considers to be the root of
your Drime drive.

Normally you will leave this blank and rclone will determine the correct
root to use itself and fill in the value in the config file.

However you can set this to restrict rclone to a specific folder
hierarchy.

In order to do this you will have to find the Folder ID of the directory
you wish rclone to display.

You can do this with rclone

    $ rclone lsf -Fip --dirs-only remote:
    d6341f53-ee65-4f29-9f59-d11e8070b2a0;Files/
    f4f5c9b8-6ece-478b-b03e-4538edfe5a1c;Photos/
    d50e356c-29ca-4b27-a3a7-494d91026e04;Videos/

The ID to use is the part before the ; so you could set

    root_folder_id = d6341f53-ee65-4f29-9f59-d11e8070b2a0

To restrict rclone to the Files directory.

Standard options

Here are the Standard options specific to drime (Drime).

--drime-access-token

API Access token

You can get this from the web control panel.

Properties:

-   Config: access_token
-   Env Var: RCLONE_DRIME_ACCESS_TOKEN
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to drime (Drime).

--drime-root-folder-id

ID of the root folder

Leave this blank normally, rclone will fill it in automatically.

If you want rclone to be restricted to a particular folder you can fill
it in - see the docs for more info.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_DRIME_ROOT_FOLDER_ID
-   Type: string
-   Required: false

--drime-workspace-id

Account ID

Leave this blank normally unless you wish to specify a Workspace ID.

Properties:

-   Config: workspace_id
-   Env Var: RCLONE_DRIME_WORKSPACE_ID
-   Type: string
-   Required: false

--drime-list-chunk

Number of items to list in each call

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_DRIME_LIST_CHUNK
-   Type: int
-   Default: 1000

--drime-hard-delete

Delete files permanently rather than putting them into the trash.

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_DRIME_HARD_DELETE
-   Type: bool
-   Default: false

--drime-upload-cutoff

Cutoff for switching to chunked upload.

Any files larger than this will be uploaded in chunks of chunk_size. The
minimum is 0 and the maximum is 5 GiB.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_DRIME_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 5Mi

--drime-chunk-size

Chunk size to use for uploading.

When uploading files larger than upload_cutoff or files with unknown
size (e.g. from "rclone rcat" or uploaded with "rclone mount" or google
photos or google docs) they will be uploaded as multipart uploads using
this chunk size.

Note that "--drime-upload-concurrency" chunks of this size are buffered
in memory per transfer.

If you are transferring large files over high-speed links and you have
enough memory, then increasing this will speed up the transfers.

Rclone will automatically increase the chunk size when uploading a large
file of known size to stay below the 10,000 chunks limit.

Files of unknown size are uploaded with the configured chunk_size. Since
the default chunk size is 5 MiB and there can be at most 10,000 chunks,
this means that by default the maximum size of a file you can stream
upload is 48 GiB. If you wish to stream upload larger files then you
will need to increase chunk_size.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_DRIME_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 5Mi

--drime-upload-concurrency

Concurrency for multipart uploads and copies.

This is the number of chunks of the same file that are uploaded
concurrently for multipart uploads and copies.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_DRIME_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 4

--drime-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_DRIME_ENCODING
-   Type: Encoding
-   Default:
    Slash,BackSlash,Del,Ctl,LeftSpace,RightSpace,InvalidUtf8,Dot

--drime-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_DRIME_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Drime only supports filenames up to 255 bytes in length, where filenames
are encoded in UTF8.

Dropbox

Paths are specified as remote:path

Dropbox paths may be as deep as required, e.g.
remote:directory/subdirectory.

Configuration

The initial setup for dropbox involves getting a token from Dropbox
which you need to do in your browser. rclone config walks you through
it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    n) New remote
    d) Delete remote
    q) Quit config
    e/n/d/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Dropbox
       \ "dropbox"
    [snip]
    Storage> dropbox
    Dropbox App Key - leave blank normally.
    app_key>
    Dropbox App Secret - leave blank normally.
    app_secret>
    Remote config
    Please visit:
    https://www.dropbox.com/1/oauth2/authorize?client_id=XXXXXXXXXXXXXXX&response_type=code
    Enter the code: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX_XXXXXXXXXX
    Configuration complete.
    Options:
    - type: dropbox
    - app_key:
    - app_secret:
    - token: XXXXXXXXXXXXXXXXXXXXXXXXXXXXX_XXXX_XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Dropbox. This only runs from the moment it opens
your browser to the moment you get back the verification code. This is
on http://127.0.0.1:53682/ and it may require you to unblock it
temporarily if you are running a host firewall, or use manual mode.

You can then use it like this,

List directories in top level of your dropbox

    rclone lsd remote:

List all the files in your dropbox

    rclone ls remote:

To copy a local directory to a dropbox directory called backup

    rclone copy /home/source remote:backup

Dropbox for business

Rclone supports Dropbox for business and Team Folders.

When using Dropbox for business remote: and remote:path/to/file will
refer to your personal folder.

If you wish to see Team Folders you must use a leading / in the path, so
rclone lsd remote:/ will refer to the root and show you all Team Folders
and your User Folder.

You can then use team folders like this remote:/TeamFolder and
remote:/TeamFolder/path/to/file.

A leading / for a Dropbox personal account will do nothing, but it will
take an extra HTTP transaction so it should be avoided.

Modification times and hashes

Dropbox supports modified times, but the only way to set a modification
time is to re-upload the file.

This means that if you uploaded your data with an older version of
rclone which didn't support the v2 API and modified times, rclone will
decide to upload all your old data to fix the modification times. If you
don't want this to happen use --size-only or --checksum flag to stop it.

Dropbox supports its own hash type which is checked for all transfers.

Restricted filename characters

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  /            0x2F        ／
  DEL          0x7F         ␡
  \            0x5C        ＼

File names can also not end with the following characters. These only
get replaced if they are the last character in the name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Batch mode uploads

Using batch mode uploads is very important for performance when using
the Dropbox API. See the dropbox performance guide for more info.

There are 3 modes rclone can use for uploads.

--dropbox-batch-mode off

In this mode rclone will not use upload batching. This was the default
before rclone v1.55. It has the disadvantage that it is very likely to
encounter too_many_requests errors like this

    NOTICE: too_many_requests/.: Too many requests or write operations. Trying again in 15 seconds.

When rclone receives these it has to wait for 15s or sometimes 300s
before continuing which really slows down transfers.

This will happen especially if --transfers is large, so this mode isn't
recommended except for compatibility or investigating problems.

--dropbox-batch-mode sync

In this mode rclone will batch up uploads to the size specified by
--dropbox-batch-size and commit them together.

Using this mode means you can use a much higher --transfers parameter
(32 or 64 works fine) without receiving too_many_requests errors.

This mode ensures full data integrity.

Note that there may be a pause when quitting rclone while rclone
finishes up the last batch using this mode.

--dropbox-batch-mode async

In this mode rclone will batch up uploads to the size specified by
--dropbox-batch-size and commit them together.

However it will not wait for the status of the batch to be returned to
the caller. This means rclone can use a much bigger batch size (much
bigger than --transfers), at the cost of not being able to check the
status of the upload.

This provides the maximum possible upload speed especially with lots of
small files, however rclone can't check the file got uploaded properly
using this mode.

If you are using this mode then using "rclone check" after the transfer
completes is recommended. Or you could do an initial transfer with
--dropbox-batch-mode async then do a final transfer with
--dropbox-batch-mode sync (the default).

Note that there may be a pause when quitting rclone while rclone
finishes up the last batch using this mode.

Exporting files

Certain files in Dropbox are "exportable", such as Dropbox Paper
documents. These files need to be converted to another format in order
to be downloaded. Often multiple formats are available for conversion.

When rclone downloads a exportable file, it chooses the format to
download based on the --dropbox-export-formats setting. By default, the
export formats are html,md, which are sensible defaults for Dropbox
Paper.

Rclone chooses the first format ID in the export formats list that
Dropbox supports for a given file. If no format in the list is usable,
rclone will choose the default format that Dropbox suggests.

Rclone will change the extension to correspond to the export format.
Here are some examples of how extensions are mapped:

  File type        Filename in Dropbox   Filename in rclone
  ---------------- --------------------- --------------------
  Paper            mydoc.paper           mydoc.html
  Paper template   mydoc.papert          mydoc.papert.html
  other            mydoc                 mydoc.html

Importing exportable files is not yet supported by rclone.

Here are the supported export extensions known by rclone. Note that
rclone does not currently support other formats not on this list, even
if Dropbox supports them. Also, Dropbox could change the list of
supported formats at any time.

  Format ID   Name       Description
  ----------- ---------- ----------------------
  html        HTML       HTML document
  md          Markdown   Markdown text format

Standard options

Here are the Standard options specific to dropbox (Dropbox).

--dropbox-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_DROPBOX_CLIENT_ID
-   Type: string
-   Required: false

--dropbox-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_DROPBOX_CLIENT_SECRET
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to dropbox (Dropbox).

--dropbox-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_DROPBOX_TOKEN
-   Type: string
-   Required: false

--dropbox-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_DROPBOX_AUTH_URL
-   Type: string
-   Required: false

--dropbox-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_DROPBOX_TOKEN_URL
-   Type: string
-   Required: false

--dropbox-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_DROPBOX_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--dropbox-chunk-size

Upload chunk size (< 150Mi).

Any files larger than this will be uploaded in chunks of this size.

Note that chunks are buffered in memory (one at a time) so rclone can
deal with retries. Setting this larger will increase the speed slightly
(at most 10% for 128 MiB in tests) at the cost of using more memory. It
can be set smaller if you are tight on memory.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_DROPBOX_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 48Mi

--dropbox-impersonate

Impersonate this user when using a business account.

Note that if you want to use impersonate, you should make sure this flag
is set when running "rclone config" as this will cause rclone to request
the "members.read" scope which it won't normally. This is needed to
lookup a members email address into the internal ID that dropbox uses in
the API.

Using the "members.read" scope will require a Dropbox Team Admin to
approve during the OAuth flow.

You will have to use your own App (setting your own client_id and
client_secret) to use this option as currently rclone's default set of
permissions doesn't include "members.read". This can be added once v1.55
or later is in use everywhere.

Properties:

-   Config: impersonate
-   Env Var: RCLONE_DROPBOX_IMPERSONATE
-   Type: string
-   Required: false

--dropbox-shared-files

Instructs rclone to work on individual shared files.

In this mode rclone's features are extremely limited - only list (ls,
lsl, etc.) operations and read operations (e.g. downloading) are
supported in this mode. All other operations will be disabled.

Properties:

-   Config: shared_files
-   Env Var: RCLONE_DROPBOX_SHARED_FILES
-   Type: bool
-   Default: false

--dropbox-shared-folders

Instructs rclone to work on shared folders.

When this flag is used with no path only the List operation is supported
and all available shared folders will be listed. If you specify a path
the first part will be interpreted as the name of shared folder. Rclone
will then try to mount this shared to the root namespace. On success
shared folder rclone proceeds normally. The shared folder is now pretty
much a normal folder and all normal operations are supported.

Note that we don't unmount the shared folder afterwards so the
--dropbox-shared-folders can be omitted after the first use of a
particular shared folder.

See also --dropbox-root-namespace for an alternative way to work with
shared folders.

Properties:

-   Config: shared_folders
-   Env Var: RCLONE_DROPBOX_SHARED_FOLDERS
-   Type: bool
-   Default: false

--dropbox-pacer-min-sleep

Minimum time to sleep between API calls.

Properties:

-   Config: pacer_min_sleep
-   Env Var: RCLONE_DROPBOX_PACER_MIN_SLEEP
-   Type: Duration
-   Default: 10ms

--dropbox-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_DROPBOX_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,RightSpace,InvalidUtf8,Dot

--dropbox-root-namespace

Specify a different Dropbox namespace ID to use as the root for all
paths.

Properties:

-   Config: root_namespace
-   Env Var: RCLONE_DROPBOX_ROOT_NAMESPACE
-   Type: string
-   Required: false

--dropbox-export-formats

Comma separated list of preferred formats for exporting files

Certain Dropbox files can only be accessed by exporting them to another
format. These include Dropbox Paper documents.

For each such file, rclone will choose the first format on this list
that Dropbox considers valid. If none is valid, it will choose Dropbox's
default format.

Known formats include: "html", "md" (markdown)

Properties:

-   Config: export_formats
-   Env Var: RCLONE_DROPBOX_EXPORT_FORMATS
-   Type: CommaSepList
-   Default: html,md

--dropbox-skip-exports

Skip exportable files in all listings.

If given, exportable files practically become invisible to rclone.

Properties:

-   Config: skip_exports
-   Env Var: RCLONE_DROPBOX_SKIP_EXPORTS
-   Type: bool
-   Default: false

--dropbox-show-all-exports

Show all exportable files in listings.

Adding this flag will allow all exportable files to be server side
copied. Note that rclone doesn't add extensions to the exportable file
names in this mode.

Do not use this flag when trying to download exportable files - rclone
will fail to download them.

Properties:

-   Config: show_all_exports
-   Env Var: RCLONE_DROPBOX_SHOW_ALL_EXPORTS
-   Type: bool
-   Default: false

--dropbox-batch-mode

Upload file batching sync|async|off.

This sets the batch mode used by rclone.

For full info see the main docs

This has 3 possible values

-   off - no batching
-   sync - batch uploads and check completion (default)
-   async - batch upload and don't check completion

Rclone will close any outstanding batches when it exits which may make a
delay on quit.

Properties:

-   Config: batch_mode
-   Env Var: RCLONE_DROPBOX_BATCH_MODE
-   Type: string
-   Default: "sync"

--dropbox-batch-size

Max number of files in upload batch.

This sets the batch size of files to upload. It has to be less than
1000.

By default this is 0 which means rclone will calculate the batch size
depending on the setting of batch_mode.

-   batch_mode: async - default batch_size is 100
-   batch_mode: sync - default batch_size is the same as --transfers
-   batch_mode: off - not in use

Rclone will close any outstanding batches when it exits which may make a
delay on quit.

Setting this is a great idea if you are uploading lots of small files as
it will make them a lot quicker. You can use --transfers 32 to maximise
throughput.

Properties:

-   Config: batch_size
-   Env Var: RCLONE_DROPBOX_BATCH_SIZE
-   Type: int
-   Default: 0

--dropbox-batch-timeout

Max time to allow an idle upload batch before uploading.

If an upload batch is idle for more than this long then it will be
uploaded.

The default for this is 0 which means rclone will choose a sensible
default based on the batch_mode in use.

-   batch_mode: async - default batch_timeout is 10s
-   batch_mode: sync - default batch_timeout is 500ms
-   batch_mode: off - not in use

Properties:

-   Config: batch_timeout
-   Env Var: RCLONE_DROPBOX_BATCH_TIMEOUT
-   Type: Duration
-   Default: 0s

--dropbox-batch-commit-timeout

Max time to wait for a batch to finish committing. (no longer used)

Properties:

-   Config: batch_commit_timeout
-   Env Var: RCLONE_DROPBOX_BATCH_COMMIT_TIMEOUT
-   Type: Duration
-   Default: 10m0s

--dropbox-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_DROPBOX_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Note that Dropbox is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

There are some file names such as thumbs.db which Dropbox can't store.
There is a full list of them in the "Ignored Files" section of this
document. Rclone will issue an error message
File name disallowed - not uploading if it attempts to upload one of
those file names, but the sync won't fail.

Some errors may occur if you try to sync copyright-protected files
because Dropbox has its own copyright detector that prevents this sort
of file being downloaded. This will return the error
ERROR : /path/to/your/file: Failed to copy: failed to open source object: path/restricted_content/.

If you have more than 10,000 files in a directory then
rclone purge dropbox:dir will return the error
Failed to purge: There are too many files involved in this operation. As
a work-around do an rclone delete dropbox:dir followed by an
rclone rmdir dropbox:dir.

When using rclone link you'll need to set --expire if using a
non-personal account otherwise the visibility may not be correct. (Note
that --expire isn't supported on personal accounts). See the forum
discussion and the dropbox SDK issue.

Modification times for Dropbox Paper documents are not exact, and may
not change for some period after the document is edited. To make sure
you get recent changes in a sync, either wait an hour or so, or use
--ignore-times to force a full sync.

Get your own Dropbox App ID

When you use rclone with Dropbox in its default configuration you are
using rclone's App ID. This is shared between all the rclone users.

Here is how to create your own Dropbox App ID for rclone:

1.  Log into the Dropbox App console with your Dropbox Account (It need
    not to be the same account as the Dropbox you want to access)

2.  Choose an API => Usually this should be Dropbox API

3.  Choose the type of access you want to use => Full Dropbox or
    App Folder. If you want to use Team Folders, Full Dropbox is
    required (see here).

4.  Name your App. The app name is global, so you can't use rclone for
    example

5.  Click the button Create App

6.  Switch to the Permissions tab. Enable at least the following
    permissions: account_info.read, files.metadata.write,
    files.content.write, files.content.read, sharing.write. The
    files.metadata.read and sharing.read checkboxes will be marked too.
    Click Submit

7.  Switch to the Settings tab. Fill OAuth2 - Redirect URIs as
    http://localhost:53682/ and click on Add

8.  Find the App key and App secret values on the Settings tab. Use
    these values in rclone config to add a new remote or edit an
    existing remote. The App key setting corresponds to client_id in
    rclone config, the App secret corresponds to client_secret

Enterprise File Fabric

This backend supports Storage Made Easy's Enterprise File Fabric™ which
provides a software solution to integrate and unify File and Object
Storage accessible through a global file system.

Configuration

The initial setup for the Enterprise File Fabric backend involves
getting a token from the Enterprise File Fabric which you need to do in
your browser. rclone config walks you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Enterprise File Fabric
       \ "filefabric"
    [snip]
    Storage> filefabric
    ** See help for filefabric backend at: https://rclone.org/filefabric/ **

    URL of the Enterprise File Fabric to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Storage Made Easy US
       \ "https://storagemadeeasy.com"
     2 / Storage Made Easy EU
       \ "https://eu.storagemadeeasy.com"
     3 / Connect to your Enterprise File Fabric
       \ "https://yourfabric.smestorage.com"
    url> https://yourfabric.smestorage.com/
    ID of the root folder
    Leave blank normally.

    Fill in to make rclone start with directory of a given ID.

    Enter a string value. Press Enter for the default ("").
    root_folder_id> 
    Permanent Authentication Token

    A Permanent Authentication Token can be created in the Enterprise File
    Fabric, on the users Dashboard under Security, there is an entry
    you'll see called "My Authentication Tokens". Click the Manage button
    to create one.

    These tokens are normally valid for several years.

    For more info see: https://docs.storagemadeeasy.com/organisationcloud/api-tokens

    Enter a string value. Press Enter for the default ("").
    permanent_token> xxxxxxxxxxxxxxx-xxxxxxxxxxxxxxxx
    Edit advanced config? (y/n)
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    Configuration complete.
    Options:
    - type: filefabric
    - url: https://yourfabric.smestorage.com/
    - permanent_token: xxxxxxxxxxxxxxx-xxxxxxxxxxxxxxxx
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your Enterprise File Fabric

    rclone lsd remote:

List all the files in your Enterprise File Fabric

    rclone ls remote:

To copy a local directory to an Enterprise File Fabric directory called
backup

    rclone copy /home/source remote:backup

Modification times and hashes

The Enterprise File Fabric allows modification times to be set on files
accurate to 1 second. These will be used to detect whether objects need
syncing or not.

The Enterprise File Fabric does not support any data hashes at this
time.

Restricted filename characters

The default restricted characters set will be replaced.

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Empty files

Empty files aren't supported by the Enterprise File Fabric. Rclone will
therefore upload an empty file as a single space with a mime type of
application/vnd.rclone.empty.file and files with that mime type are
treated as empty.

Root folder ID

You can set the root_folder_id for rclone. This is the directory
(identified by its Folder ID) that rclone considers to be the root of
your Enterprise File Fabric.

Normally you will leave this blank and rclone will determine the correct
root to use itself.

However you can set this to restrict rclone to a specific folder
hierarchy.

In order to do this you will have to find the Folder ID of the directory
you wish rclone to display. These aren't displayed in the web interface,
but you can use rclone lsf to find them, for example

    $ rclone lsf --dirs-only -Fip --csv filefabric:
    120673758,Burnt PDFs/
    120673759,My Quick Uploads/
    120673755,My Syncs/
    120673756,My backups/
    120673757,My contacts/
    120673761,S3 Storage/

The ID for "S3 Storage" would be 120673761.

Standard options

Here are the Standard options specific to filefabric (Enterprise File
Fabric).

--filefabric-url

URL of the Enterprise File Fabric to connect to.

Properties:

-   Config: url
-   Env Var: RCLONE_FILEFABRIC_URL
-   Type: string
-   Required: true
-   Examples:
    -   "https://storagemadeeasy.com"
        -   Storage Made Easy US
    -   "https://eu.storagemadeeasy.com"
        -   Storage Made Easy EU
    -   "https://yourfabric.smestorage.com"
        -   Connect to your Enterprise File Fabric

--filefabric-root-folder-id

ID of the root folder.

Leave blank normally.

Fill in to make rclone start with directory of a given ID.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_FILEFABRIC_ROOT_FOLDER_ID
-   Type: string
-   Required: false

--filefabric-permanent-token

Permanent Authentication Token.

A Permanent Authentication Token can be created in the Enterprise File
Fabric, on the users Dashboard under Security, there is an entry you'll
see called "My Authentication Tokens". Click the Manage button to create
one.

These tokens are normally valid for several years.

For more info see:
https://docs.storagemadeeasy.com/organisationcloud/api-tokens

Properties:

-   Config: permanent_token
-   Env Var: RCLONE_FILEFABRIC_PERMANENT_TOKEN
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to filefabric (Enterprise File
Fabric).

--filefabric-token

Session Token.

This is a session token which rclone caches in the config file. It is
usually valid for 1 hour.

Don't set this value - rclone will set it automatically.

Properties:

-   Config: token
-   Env Var: RCLONE_FILEFABRIC_TOKEN
-   Type: string
-   Required: false

--filefabric-token-expiry

Token expiry time.

Don't set this value - rclone will set it automatically.

Properties:

-   Config: token_expiry
-   Env Var: RCLONE_FILEFABRIC_TOKEN_EXPIRY
-   Type: string
-   Required: false

--filefabric-version

Version read from the file fabric.

Don't set this value - rclone will set it automatically.

Properties:

-   Config: version
-   Env Var: RCLONE_FILEFABRIC_VERSION
-   Type: string
-   Required: false

--filefabric-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_FILEFABRIC_ENCODING
-   Type: Encoding
-   Default: Slash,Del,Ctl,InvalidUtf8,Dot

--filefabric-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_FILEFABRIC_DESCRIPTION
-   Type: string
-   Required: false

FileLu

FileLu is a reliable cloud storage provider offering features like
secure file uploads, downloads, flexible storage options, and sharing
capabilities. With support for high storage limits and seamless
integration with rclone, FileLu makes managing files in the cloud easy.
Its cross-platform file backup services let you upload and back up files
from any internet-connected device.

Note FileLu now has a fully featured S3 backend FileLu S5, an industry
standard S3 compatible object store.

Configuration

Here is an example of how to make a remote called filelu. First, run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> filelu
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    xx / FileLu Cloud Storage
       \ "filelu"
    [snip]
    Storage> filelu
    Enter your FileLu Rclone Key:
    key> YOUR_FILELU_RCLONE_KEY RC_xxxxxxxxxxxxxxxxxxxxxxxx
    Configuration complete.

    Keep this "filelu" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Paths

A path without an initial / will operate in the Rclone directory.

A path with an initial / will operate at the root where you can see the
Rclone directory.

    $ rclone lsf TestFileLu:/
    CCTV/
    Camera/
    Documents/
    Music/
    Photos/
    Rclone/
    Vault/
    Videos/

Example Commands

Create a new folder named foldername in the Rclone directory:

    rclone mkdir filelu:foldername

Delete a folder on FileLu:

    rclone rmdir filelu:/folder/path/

Delete a file on FileLu:

    rclone delete filelu:/hello.txt

List files from your FileLu account:

    rclone ls filelu:

List all folders:

    rclone lsd filelu:

Copy a specific file to the FileLu root:

    rclone copy D:\hello.txt filelu:

Copy files from a local directory to a FileLu directory:

    rclone copy D:/local-folder filelu:/remote-folder/path/

Download a file from FileLu into a local directory:

    rclone copy filelu:/file-path/hello.txt D:/local-folder

Move files from a local directory to a FileLu directory:

    rclone move D:\local-folder filelu:/remote-path/

Sync files from a local directory to a FileLu directory:

    rclone sync --interactive D:/local-folder filelu:/remote-path/

Mount remote to local Linux:

    rclone mount filelu: /root/mnt --vfs-cache-mode full

Mount remote to local Windows:

    rclone mount filelu: D:/local_mnt --vfs-cache-mode full

Get storage info about the FileLu account:

    rclone about filelu:

All the other rclone commands are supported by this backend.

FolderID instead of folder path

We use the FolderID instead of the folder name to prevent errors when
users have identical folder names or paths. For example, if a user has
two or three folders named "test_folders," the system may become
confused and won't know which folder to move. In large storage systems,
some clients have hundred of thousands of folders and a few millions of
files, duplicate folder names or paths are quite common.

Modification Times and Hashes

FileLu supports both modification times and MD5 hashes.

FileLu only supports filenames and folder names up to 255 characters in
length, where a character is a Unicode character.

Duplicated Files

When uploading and syncing via Rclone, FileLu does not allow uploading
duplicate files within the same directory. However, you can upload
duplicate files, provided they are in different directories (folders).

Failure to Log / Invalid Credentials or KEY

Ensure that you have the correct Rclone key, which can be found in My
Account. Every time you toggle Rclone OFF and ON in My Account, a new
RC_xxxxxxxxxxxxxxxxxxxx key is generated. Be sure to update your Rclone
configuration with the new key.

If you are connecting to your FileLu remote for the first time and
encounter an error such as:

    Failed to create file system for "my-filelu-remote:": couldn't login: Invalid credentials

Ensure your Rclone Key is correct.

Process killed

Accounts with large files or extensive metadata may experience
significant memory usage during list/sync operations. Ensure the system
running rclone has sufficient memory and CPU to handle these operations.

Standard options

Here are the Standard options specific to filelu (FileLu Cloud Storage).

--filelu-key

Your FileLu Rclone key from My Account

Properties:

-   Config: key
-   Env Var: RCLONE_FILELU_KEY
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to filelu (FileLu Cloud Storage).

--filelu-upload-cutoff

Cutoff for switching to chunked upload. Any files larger than this will
be uploaded in chunks of chunk_size.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_FILELU_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 500Mi

--filelu-chunk-size

Chunk size to use for uploading. Used for multipart uploads.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_FILELU_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 64Mi

--filelu-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_FILELU_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,SingleQuote,BackQuote,Dollar,Colon,Question,Asterisk,Pipe,Hash,Percent,BackSlash,CrLf,Del,Ctl,LeftSpace,LeftPeriod,LeftTilde,LeftCrLfHtVt,RightSpace,RightPeriod,RightCrLfHtVt,InvalidUtf8,Dot,SquareBracket,Semicolon,Exclamation

--filelu-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_FILELU_DESCRIPTION
-   Type: string
-   Required: false

Limitations

This backend uses a custom library implementing the FileLu API. While it
supports file transfers, some advanced features may not yet be
available. Please report any issues to the rclone forum for
troubleshooting and updates.

For further information, visit FileLu's website.

Filen

Configuration

The initial setup for Filen requires that you get an API key for your
account, currently this is only possible using the Filen CLI. This means
you must first download the CLI, login, and then run the export-api-key
command.

Note: If you change your Filen account password, you will need to update
your rclone configuration with the new password and a re-exported API
key (via export-api-key).

Here is an example of how to make a remote called FilenRemote. First
run:

     rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    name> FilenRemote
    Option Storage.

    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Filen
       \ "filen"
    [snip]
    Storage> filen

    Option Email.
    The email of your Filen account
    Enter a value.
    Email> youremail@provider.com

    Option Password.
    The password of your Filen account
    Choose an alternative below.
    y) Yes, type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:

    Option API Key.
    An API Key for your Filen account
    Get this using the Filen CLI export-api-key command
    You can download the Filen CLI from https://github.com/FilenCloudDienste/filen-cli
    Choose an alternative below.
    y) Yes, type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: filen
    - Email: youremail@provider.com
    - Password: *** ENCRYPTED ***
    - API Key: *** ENCRYPTED ***
    Keep this "FilenRemote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Modification times and hashes

Modification times are fully supported for files, for directories, only
the creation time matters.

Filen supports Blake3 hashes.

Restricted filename characters

Invalid UTF-8 bytes will be replaced

API Key

Standard options

Here are the Standard options specific to filen (Filen).

--filen-email

Email of your Filen account

Properties:

-   Config: email
-   Env Var: RCLONE_FILEN_EMAIL
-   Type: string
-   Required: true

--filen-password

Password of your Filen account

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_FILEN_PASSWORD
-   Type: string
-   Required: true

--filen-api-key

API Key for your Filen account

Get this using the Filen CLI export-api-key command You can download the
Filen CLI from https://github.com/FilenCloudDienste/filen-cli

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: api_key
-   Env Var: RCLONE_FILEN_API_KEY
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to filen (Filen).

--filen-upload-concurrency

Concurrency for chunked uploads.

This is the upper limit for how many transfers for the same file are
running concurrently. Setting this above to a value smaller than 1 will
cause uploads to deadlock.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_FILEN_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 16

--filen-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_FILEN_ENCODING
-   Type: Encoding
-   Default: Slash,Del,Ctl,InvalidUtf8,Dot

--filen-master-keys

Master Keys (internal use only)

Properties:

-   Config: master_keys
-   Env Var: RCLONE_FILEN_MASTER_KEYS
-   Type: string
-   Required: false

--filen-private-key

Private RSA Key (internal use only)

Properties:

-   Config: private_key
-   Env Var: RCLONE_FILEN_PRIVATE_KEY
-   Type: string
-   Required: false

--filen-public-key

Public RSA Key (internal use only)

Properties:

-   Config: public_key
-   Env Var: RCLONE_FILEN_PUBLIC_KEY
-   Type: string
-   Required: false

--filen-auth-version

Authentication Version (internal use only)

Properties:

-   Config: auth_version
-   Env Var: RCLONE_FILEN_AUTH_VERSION
-   Type: string
-   Required: false

--filen-base-folder-uuid

UUID of Account Root Directory (internal use only)

Properties:

-   Config: base_folder_uuid
-   Env Var: RCLONE_FILEN_BASE_FOLDER_UUID
-   Type: string
-   Required: false

--filen-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_FILEN_DESCRIPTION
-   Type: string
-   Required: false

Files.com

Files.com is a cloud storage service that provides a secure and easy way
to store and share files.

The initial setup for filescom involves authenticating with your
Files.com account. You can do this by providing your site subdomain,
username, and password. Alternatively, you can authenticate using an API
Key from Files.com. rclone config walks you through it.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> remote

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Files.com
      \ "filescom"
    [snip]
    Storage> filescom

    Option site.
    Your site subdomain (e.g. mysite) or custom domain (e.g. myfiles.customdomain.com)
    Enter a value. Press Enter to leave empty.
    site> mysite

    Option username.
    The username used to authenticate with Files.com.
    Enter a value. Press Enter to leave empty.
    username> user

    Option password.
    The password used to authenticate with Files.com.
    Choose an alternative below. Press Enter for the default (n).
    y) Yes, type in my own password
    g) Generate random password
    n) No, leave this optional password blank (default)
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: filescom
    - site: mysite
    - username: user
    - password: *** ENCRYPTED ***
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can use rclone.

See all files in the top level:

    rclone lsf remote:

Make a new directory in the root:

    rclone mkdir remote:dir

Recursively List the contents:

    rclone ls remote:

Sync /home/local/directory to the remote directory, deleting any excess
files in the directory.

    rclone sync --interactive /home/local/directory remote:dir

Hashes

In December 2024 files.com started supporting more checksums.

However if you want hashes you must enable them in your site by visiting
the "File Integrity" section in "Data Governance" to configure your
settings and select the checksum algorithms that meet your requirements.

Rclone currently only support CRC32 and MD5 for use in syncing but
selecting more checksums will not affect rclone's operations.

For use with rclone, selecting at least MD5 is recommended so rclone can
do an end to end integrity check.

Standard options

Here are the Standard options specific to filescom (Files.com).

--filescom-site

Your site subdomain (e.g. mysite) or custom domain (e.g.
myfiles.customdomain.com).

Properties:

-   Config: site
-   Env Var: RCLONE_FILESCOM_SITE
-   Type: string
-   Required: false

--filescom-username

The username used to authenticate with Files.com.

Properties:

-   Config: username
-   Env Var: RCLONE_FILESCOM_USERNAME
-   Type: string
-   Required: false

--filescom-password

The password used to authenticate with Files.com.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_FILESCOM_PASSWORD
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to filescom (Files.com).

--filescom-api-key

The API key used to authenticate with Files.com.

Properties:

-   Config: api_key
-   Env Var: RCLONE_FILESCOM_API_KEY
-   Type: string
-   Required: false

--filescom-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_FILESCOM_ENCODING
-   Type: Encoding
-   Default:
    Slash,BackSlash,Del,Ctl,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot

--filescom-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_FILESCOM_DESCRIPTION
-   Type: string
-   Required: false

FTP

FTP is the File Transfer Protocol. Rclone FTP support is provided using
the github.com/jlaffaye/ftp package.

Limitations of Rclone's FTP backend

Paths are specified as remote:path. If the path does not begin with a /
it is relative to the home directory of the user. An empty path remote:
refers to the user's home directory.

Configuration

To create an FTP configuration named remote, run

    rclone config

Rclone config guides you through an interactive setup process. A minimal
rclone FTP remote definition only requires host, username and password.
For an anonymous FTP server, see below.

    No remotes found, make a new one\?
    n) New remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    n/r/c/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / FTP
       \ "ftp"
    [snip]
    Storage> ftp
    ** See help for ftp backend at: https://rclone.org/ftp/ **

    FTP host to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to ftp.example.com
       \ "ftp.example.com"
    host> ftp.example.com
    FTP username
    Enter a string value. Press Enter for the default ("$USER").
    user> 
    FTP port number
    Enter a signed integer. Press Enter for the default (21).
    port> 
    FTP password
    y) Yes type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Use FTP over TLS (Implicit)
    Enter a boolean value (true or false). Press Enter for the default ("false").
    tls> 
    Use FTP over TLS (Explicit)
    Enter a boolean value (true or false). Press Enter for the default ("false").
    explicit_tls> 
    Remote config
    Configuration complete.
    Options:
    - type: ftp
    - host: ftp.example.com
    - pass: *** ENCRYPTED ***
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

To see all directories in the home directory of remote

    rclone lsd remote:

Make a new directory

    rclone mkdir remote:path/to/directory

List the contents of a directory

    rclone ls remote:path/to/directory

Sync /home/local/directory to the remote directory, deleting any excess
files in the directory.

    rclone sync --interactive /home/local/directory remote:directory

Anonymous FTP

When connecting to a FTP server that allows anonymous login, you can use
the special "anonymous" username. Traditionally, this user account
accepts any string as a password, although it is common to use either
the password "anonymous" or "guest". Some servers require the use of a
valid e-mail address as password.

Using on-the-fly or connection string remotes makes it easy to access
such servers, without requiring any configuration in advance. The
following are examples of that:

    rclone lsf :ftp: --ftp-host=speedtest.tele2.net --ftp-user=anonymous --ftp-pass=$(rclone obscure dummy)
    rclone lsf :ftp,host=speedtest.tele2.net,user=anonymous,pass=$(rclone obscure dummy):

The above examples work in Linux shells and in PowerShell, but not
Windows Command Prompt. They execute the rclone obscure command to
create a password string in the format required by the pass option. The
following examples are exactly the same, except use an already obscured
string representation of the same password "dummy", and therefore works
even in Windows Command Prompt:

    rclone lsf :ftp: --ftp-host=speedtest.tele2.net --ftp-user=anonymous --ftp-pass=IXs2wc8OJOz7SYLBk47Ji1rHTmxM
    rclone lsf :ftp,host=speedtest.tele2.net,user=anonymous,pass=IXs2wc8OJOz7SYLBk47Ji1rHTmxM:

Implicit TLS

Rlone FTP supports implicit FTP over TLS servers (FTPS). This has to be
enabled in the FTP backend config for the remote, or with --ftp-tls. The
default FTPS port is 990, not 21 and can be set with --ftp-port.

TLS Options

TLS options for Implicit and Explicit TLS can be set using the following
flags which are specific to the FTP backend:

    --ftp-no-check-certificate     Do not verify the TLS certificate of the server
    --ftp-disable-tls13            Disable TLS 1.3 (workaround for FTP servers with buggy TLS)
    --ftp-tls-cache-size int       Size of TLS session cache for all control and data connections (default 32)

However any of the global TLS flags can also be used such as:

    --ca-cert stringArray          CA certificate used to verify servers
    --client-cert string           Client SSL certificate (PEM) for mutual TLS auth
    --client-key string            Client SSL private key (PEM) for mutual TLS auth
    --no-check-certificate         Do not verify the server SSL certificate (insecure)

If these need to be put in the config file so they apply to just the FTP
backend then use the override syntax, eg

    override.ca_cert = XXX
    override.client_cert = XXX
    override.client_key = XXX

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

File names cannot end with the following characters. Replacement is
limited to the last character in a file name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠

Not all FTP servers can have all characters in file names, for example:

  FTP Server    Forbidden characters
  ------------ ----------------------
  proftpd                *
  pureftpd             \ [ ]

This backend's interactive configuration wizard provides a selection of
sensible encoding settings for major FTP servers: ProFTPd, PureFTPd,
VsFTPd. Just hit a selection number when prompted.

Standard options

Here are the Standard options specific to ftp (FTP).

--ftp-host

FTP host to connect to.

E.g. "ftp.example.com".

Properties:

-   Config: host
-   Env Var: RCLONE_FTP_HOST
-   Type: string
-   Required: true

--ftp-user

FTP username.

Properties:

-   Config: user
-   Env Var: RCLONE_FTP_USER
-   Type: string
-   Default: "$USER"

--ftp-port

FTP port number.

Properties:

-   Config: port
-   Env Var: RCLONE_FTP_PORT
-   Type: int
-   Default: 21

--ftp-pass

FTP password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_FTP_PASS
-   Type: string
-   Required: false

--ftp-tls

Use Implicit FTPS (FTP over TLS).

When using implicit FTP over TLS the client connects using TLS right
from the start which breaks compatibility with non-TLS-aware servers.
This is usually served over port 990 rather than port 21. Cannot be used
in combination with explicit FTPS.

Properties:

-   Config: tls
-   Env Var: RCLONE_FTP_TLS
-   Type: bool
-   Default: false

--ftp-explicit-tls

Use Explicit FTPS (FTP over TLS).

When using explicit FTP over TLS the client explicitly requests security
from the server in order to upgrade a plain text connection to an
encrypted one. Cannot be used in combination with implicit FTPS.

Properties:

-   Config: explicit_tls
-   Env Var: RCLONE_FTP_EXPLICIT_TLS
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to ftp (FTP).

--ftp-concurrency

Maximum number of FTP simultaneous connections, 0 for unlimited.

Note that setting this is very likely to cause deadlocks so it should be
used with care.

If you are doing a sync or copy then make sure concurrency is one more
than the sum of --transfers and --checkers.

If you use --check-first then it just needs to be one more than the
maximum of --checkers and --transfers.

So for concurrency 3 you'd use --checkers 2 --transfers 2 --check-first
or --checkers 1 --transfers 1.

Properties:

-   Config: concurrency
-   Env Var: RCLONE_FTP_CONCURRENCY
-   Type: int
-   Default: 0

--ftp-no-check-certificate

Do not verify the TLS certificate of the server.

Properties:

-   Config: no_check_certificate
-   Env Var: RCLONE_FTP_NO_CHECK_CERTIFICATE
-   Type: bool
-   Default: false

--ftp-disable-epsv

Disable using EPSV even if server advertises support.

Properties:

-   Config: disable_epsv
-   Env Var: RCLONE_FTP_DISABLE_EPSV
-   Type: bool
-   Default: false

--ftp-disable-mlsd

Disable using MLSD even if server advertises support.

Properties:

-   Config: disable_mlsd
-   Env Var: RCLONE_FTP_DISABLE_MLSD
-   Type: bool
-   Default: false

--ftp-disable-utf8

Disable using UTF-8 even if server advertises support.

Properties:

-   Config: disable_utf8
-   Env Var: RCLONE_FTP_DISABLE_UTF8
-   Type: bool
-   Default: false

--ftp-writing-mdtm

Use MDTM to set modification time (VsFtpd quirk)

Properties:

-   Config: writing_mdtm
-   Env Var: RCLONE_FTP_WRITING_MDTM
-   Type: bool
-   Default: false

--ftp-force-list-hidden

Use LIST -a to force listing of hidden files and folders. This will
disable the use of MLSD.

Properties:

-   Config: force_list_hidden
-   Env Var: RCLONE_FTP_FORCE_LIST_HIDDEN
-   Type: bool
-   Default: false

--ftp-idle-timeout

Max time before closing idle connections.

If no connections have been returned to the connection pool in the time
given, rclone will empty the connection pool.

Set to 0 to keep connections indefinitely.

Properties:

-   Config: idle_timeout
-   Env Var: RCLONE_FTP_IDLE_TIMEOUT
-   Type: Duration
-   Default: 1m0s

--ftp-close-timeout

Maximum time to wait for a response to close.

Properties:

-   Config: close_timeout
-   Env Var: RCLONE_FTP_CLOSE_TIMEOUT
-   Type: Duration
-   Default: 1m0s

--ftp-tls-cache-size

Size of TLS session cache for all control and data connections.

TLS cache allows to resume TLS sessions and reuse PSK between
connections. Increase if default size is not enough resulting in TLS
resumption errors. Enabled by default. Use 0 to disable.

Properties:

-   Config: tls_cache_size
-   Env Var: RCLONE_FTP_TLS_CACHE_SIZE
-   Type: int
-   Default: 32

--ftp-disable-tls13

Disable TLS 1.3 (workaround for FTP servers with buggy TLS)

Properties:

-   Config: disable_tls13
-   Env Var: RCLONE_FTP_DISABLE_TLS13
-   Type: bool
-   Default: false

--ftp-allow-insecure-tls-ciphers

Allow insecure TLS ciphers

Setting this flag will allow the usage of the following TLS ciphers in
addition to the secure defaults:

-   TLS_RSA_WITH_AES_128_GCM_SHA256

Properties:

-   Config: allow_insecure_tls_ciphers
-   Env Var: RCLONE_FTP_ALLOW_INSECURE_TLS_CIPHERS
-   Type: bool
-   Default: false

--ftp-shut-timeout

Maximum time to wait for data connection closing status.

Properties:

-   Config: shut_timeout
-   Env Var: RCLONE_FTP_SHUT_TIMEOUT
-   Type: Duration
-   Default: 1m0s

--ftp-ask-password

Allow asking for FTP password when needed.

If this is set and no password is supplied then rclone will ask for a
password

Properties:

-   Config: ask_password
-   Env Var: RCLONE_FTP_ASK_PASSWORD
-   Type: bool
-   Default: false

--ftp-socks-proxy

Socks 5 proxy host.

Supports the format user:pass@host:port, user@host:port, host:port.

Example:

    myUser:myPass@localhost:9005

Properties:

-   Config: socks_proxy
-   Env Var: RCLONE_FTP_SOCKS_PROXY
-   Type: string
-   Required: false

--ftp-http-proxy

URL for HTTP CONNECT proxy

Set this to a URL for an HTTP proxy which supports the HTTP CONNECT
verb.

Supports the format http://user:pass@host:port, http://host:port,
http://host.

Example:

    http://myUser:myPass@proxyhostname.example.com:8000

Properties:

-   Config: http_proxy
-   Env Var: RCLONE_FTP_HTTP_PROXY
-   Type: string
-   Required: false

--ftp-no-check-upload

Don't check the upload is OK

Normally rclone will try to check the upload exists after it has
uploaded a file to make sure the size and modification time are as
expected.

This flag stops rclone doing these checks. This enables uploading to
folders which are write only.

You will likely need to use the --inplace flag also if uploading to a
write only folder.

Properties:

-   Config: no_check_upload
-   Env Var: RCLONE_FTP_NO_CHECK_UPLOAD
-   Type: bool
-   Default: false

--ftp-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_FTP_ENCODING
-   Type: Encoding
-   Default: Slash,Del,Ctl,RightSpace,Dot
-   Examples:
    -   "Asterisk,Ctl,Dot,Slash"
        -   ProFTPd can't handle '*' in file names
    -   "BackSlash,Ctl,Del,Dot,RightSpace,Slash,SquareBracket"
        -   PureFTPd can't handle '[]' or '*' in file names
    -   "Ctl,LeftPeriod,Slash"
        -   VsFTPd can't handle file names starting with dot

--ftp-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_FTP_DESCRIPTION
-   Type: string
-   Required: false

Limitations

FTP servers acting as rclone remotes must support passive mode. The mode
cannot be configured as passive is the only supported one. Rclone's FTP
implementation is not compatible with active mode as the library it uses
doesn't support it. This will likely never be supported due to security
concerns.

Rclone's FTP backend does not support any checksums but can compare file
sizes.

rclone about is not supported by the FTP backend. Backends without this
capability cannot determine free space for an rclone mount or use policy
mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

The implementation of : --dump headers, --dump bodies, --dump auth for
debugging isn't the same as for rclone HTTP based backends - it has less
fine grained control.

--timeout isn't supported (but --contimeout is).

--bind isn't supported.

Rclone's FTP backend could support server-side move but does not at
present.

The ftp_proxy environment variable is not currently supported.

Modification times

File modification time (timestamps) is supported to 1 second resolution
for major FTP servers: ProFTPd, PureFTPd, VsFTPd, and FileZilla FTP
server. The VsFTPd server has non-standard implementation of time
related protocol commands and needs a special configuration setting:
writing_mdtm = true.

Support for precise file time with other FTP servers varies depending on
what protocol extensions they advertise. If all the MLSD, MDTM and MFTM
extensions are present, rclone will use them together to provide precise
time. Otherwise the times you see on the FTP server through rclone are
those of the last file upload.

You can use the following command to check whether rclone can use
precise time with your FTP server:
rclone backend features your_ftp_remote: (the trailing colon is
important). Look for the number in the line tagged by Precision
designating the remote time precision expressed as nanoseconds. A value
of 1000000000 means that file time precision of 1 second is available. A
value of 3153600000000000000 (or another large number) means
"unsupported".

Gofile

Gofile is a content storage and distribution platform. Its aim is to
provide as much service as possible for free or at a very low price.

The initial setup for Gofile involves logging in to the web interface
and going to the "My Profile" section. Copy the "Account API token" for
use in the config file.

Note that if you wish to connect rclone to Gofile you will need a
premium account.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> remote

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    XX / Gofile
       \ (gofile)
    Storage> gofile

    Option access_token.
    API Access token
    You can get this from the web control panel.
    Enter a value. Press Enter to leave empty.
    access_token> YOURACCESSTOKEN

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: gofile
    - access_token: YOURACCESSTOKEN
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories and files in the top level of your Gofile

    rclone lsf remote:

To copy a local directory to an Gofile directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

Gofile supports modification times with a resolution of 1 second.

Gofile supports MD5 hashes, so you can use the --checksum flag.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  !            0x21        ！
  "            0x22        ＂
  *            0x2A        ＊
  :            0x3A        ：
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  \            0x5C        ＼
  |            0x7C        ｜

File names can also not start or end with the following characters.
These only get replaced if they are the first or last character in the
name:

  Character    Value   Replacement
  ----------- ------- -------------
  .            0x2E        ．

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Public Links

Gofile supports rclone link to make public links to files or
directories. If you specify a directory it will download as a zip file.
You can use the --expire flag to specify the time the link should be
valid. Note that rclone link --unlink removes all the public links for a
file.

Root folder ID

You can set the root_folder_id for rclone. This is the directory
(identified by its Folder ID) that rclone considers to be the root of
your Gofile drive.

Normally you will leave this blank and rclone will determine the correct
root to use itself and fill in the value in the config file.

However you can set this to restrict rclone to a specific folder
hierarchy.

In order to do this you will have to find the Folder ID of the directory
you wish rclone to display.

You can do this with rclone

    $ rclone lsf -Fip --dirs-only remote:
    d6341f53-ee65-4f29-9f59-d11e8070b2a0;Files/
    f4f5c9b8-6ece-478b-b03e-4538edfe5a1c;Photos/
    d50e356c-29ca-4b27-a3a7-494d91026e04;Videos/

The ID to use is the part before the ; so you could set

    root_folder_id = d6341f53-ee65-4f29-9f59-d11e8070b2a0

To restrict rclone to the Files directory.

Standard options

Here are the Standard options specific to gofile (Gofile).

--gofile-access-token

API Access token

You can get this from the web control panel.

Properties:

-   Config: access_token
-   Env Var: RCLONE_GOFILE_ACCESS_TOKEN
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to gofile (Gofile).

--gofile-root-folder-id

ID of the root folder

Leave this blank normally, rclone will fill it in automatically.

If you want rclone to be restricted to a particular folder you can fill
it in - see the docs for more info.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_GOFILE_ROOT_FOLDER_ID
-   Type: string
-   Required: false

--gofile-account-id

Account ID

Leave this blank normally, rclone will fill it in automatically.

Properties:

-   Config: account_id
-   Env Var: RCLONE_GOFILE_ACCOUNT_ID
-   Type: string
-   Required: false

--gofile-list-chunk

Number of items to list in each call

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_GOFILE_LIST_CHUNK
-   Type: int
-   Default: 1000

--gofile-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_GOFILE_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,LeftPeriod,RightPeriod,InvalidUtf8,Dot,Exclamation

--gofile-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_GOFILE_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Gofile only supports filenames up to 255 characters in length, where a
character is a unicode character.

Directories should not be cached for more than 24h otherwise files in
the directory may not be downloadable. In practice this means when using
a VFS based rclone command such as rclone mount you should make sure
--dir-cache-time is less than 24h.

Note that Gofile is currently limited to a total of 100,000 items. If
you attempt to upload more than that you will get error-limit-100000.
This limit may be lifted in the future.

Duplicated files

Gofile is capable of having files with duplicated file names. For
instance two files called hello.txt in the same directory.

Rclone cannot sync that to a normal file system but it can be fixed with
the rclone dedupe command.

Duplicated files cause problems with the syncing and you will see
messages in the log about duplicates.

Use rclone dedupe to fix duplicated files.

Google Cloud Storage

Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, e.g. remote:bucket/path/to/dir.

Configuration

The initial setup for google cloud storage involves getting a token from
Google Cloud Storage which you need to do in your browser. rclone config
walks you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    n) New remote
    d) Delete remote
    q) Quit config
    e/n/d/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Google Cloud Storage (this is not Google Drive)
       \ "google cloud storage"
    [snip]
    Storage> google cloud storage
    Google Application Client Id - leave blank normally.
    client_id>
    Google Application Client Secret - leave blank normally.
    client_secret>
    Project number optional - needed only for list/create/delete buckets - see your developer console.
    project_number> 12345678
    Service Account Credentials JSON file path - needed only if you want use SA instead of interactive login.
    service_account_file>
    Access Control List for new objects.
    Choose a number from below, or type in your own value
     1 / Object owner gets OWNER access, and all Authenticated Users get READER access.
       \ "authenticatedRead"
     2 / Object owner gets OWNER access, and project team owners get OWNER access.
       \ "bucketOwnerFullControl"
     3 / Object owner gets OWNER access, and project team owners get READER access.
       \ "bucketOwnerRead"
     4 / Object owner gets OWNER access [default if left blank].
       \ "private"
     5 / Object owner gets OWNER access, and project team members get access according to their roles.
       \ "projectPrivate"
     6 / Object owner gets OWNER access, and all Users get READER access.
       \ "publicRead"
    object_acl> 4
    Access Control List for new buckets.
    Choose a number from below, or type in your own value
     1 / Project team owners get OWNER access, and all Authenticated Users get READER access.
       \ "authenticatedRead"
     2 / Project team owners get OWNER access [default if left blank].
       \ "private"
     3 / Project team members get access according to their roles.
       \ "projectPrivate"
     4 / Project team owners get OWNER access, and all Users get READER access.
       \ "publicRead"
     5 / Project team owners get OWNER access, and all Users get WRITER access.
       \ "publicReadWrite"
    bucket_acl> 2
    Location for the newly created buckets.
    Choose a number from below, or type in your own value
     1 / Empty for default location (US).
       \ ""
     2 / Multi-regional location for Asia.
       \ "asia"
     3 / Multi-regional location for Europe.
       \ "eu"
     4 / Multi-regional location for United States.
       \ "us"
     5 / Taiwan.
       \ "asia-east1"
     6 / Tokyo.
       \ "asia-northeast1"
     7 / Singapore.
       \ "asia-southeast1"
     8 / Sydney.
       \ "australia-southeast1"
     9 / Belgium.
       \ "europe-west1"
    10 / London.
       \ "europe-west2"
    11 / Iowa.
       \ "us-central1"
    12 / South Carolina.
       \ "us-east1"
    13 / Northern Virginia.
       \ "us-east4"
    14 / Ohio.
       \ "us-east5"
    15 / Oregon.
       \ "us-west1"
    location> 12
    The storage class to use when storing objects in Google Cloud Storage.
    Choose a number from below, or type in your own value
     1 / Default
       \ ""
     2 / Multi-regional storage class
       \ "MULTI_REGIONAL"
     3 / Regional storage class
       \ "REGIONAL"
     4 / Nearline storage class
       \ "NEARLINE"
     5 / Coldline storage class
       \ "COLDLINE"
     6 / Durable reduced availability storage class
       \ "DURABLE_REDUCED_AVAILABILITY"
    storage_class> 5
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: google cloud storage
    - client_id:
    - client_secret:
    - token: {"AccessToken":"xxxx.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","RefreshToken":"x/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx_xxxxxxxxx","Expiry":"2014-07-17T20:49:14.929208288+01:00","Extra":null}
    - project_number: 12345678
    - object_acl: private
    - bucket_acl: private
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Google if using web browser to automatically
authenticate. This only runs from the moment it opens your browser to
the moment you get back the verification code. This is on
http://127.0.0.1:53682/ and this it may require you to unblock it
temporarily if you are running a host firewall, or use manual mode.

This remote is called remote and can now be used like this

See all the buckets in your project

    rclone lsd remote:

Make a new bucket

    rclone mkdir remote:bucket

List the contents of a bucket

    rclone ls remote:bucket

Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.

    rclone sync --interactive /home/local/directory remote:bucket

Service Account support

You can set up rclone with Google Cloud Storage in an unattended mode,
i.e. not tied to a specific end-user Google account. This is useful when
you want to synchronise files onto machines that don't have actively
logged-in users, for example build machines.

To get credentials for Google Cloud Platform IAM Service Accounts,
please head to the Service Account section of the Google Developer
Console. Service Accounts behave just like normal User permissions in
Google Cloud Storage ACLs, so you can limit their access (e.g. make them
read only). After creating an account, a JSON file containing the
Service Account's credentials will be downloaded onto your machines.
These credentials are what rclone will use for authentication.

To use a Service Account instead of OAuth2 token flow, enter the path to
your Service Account credentials at the service_account_file prompt and
rclone won't use the browser based authentication flow. If you'd rather
stuff the contents of the credentials file into the rclone config file,
you can set service_account_credentials with the actual contents of the
file instead, or set the equivalent environment variable.

Service Account Authentication with Access Tokens

Another option for service account authentication is to use access
tokens via gcloud impersonate-service-account. Access tokens protect
security by avoiding the use of the JSON key file, which can be
breached. They also bypass oauth login flow, which is simpler on remote
VMs that lack a web browser.

If you already have a working service account, skip to step 3.

1. Create a service account using

    gcloud iam service-accounts create gcs-read-only

You can re-use an existing service account as well (like the one created
above)

2. Attach a Viewer (read-only) or User (read-write) role to the service account

    $ PROJECT_ID=my-project
    $ gcloud --verbose iam service-accounts add-iam-policy-binding \
       gcs-read-only@${PROJECT_ID}.iam.gserviceaccount.com  \
       --member=serviceAccount:gcs-read-only@${PROJECT_ID}.iam.gserviceaccount.com \
       --role=roles/storage.objectViewer

Use the Google Cloud console to identify a limited role. Some relevant
pre-defined roles:

-   roles/storage.objectUser -- read-write access but no admin
    privileges
-   roles/storage.objectViewer -- read-only access to objects
-   roles/storage.admin -- create buckets & administrative roles

3. Get a temporary access key for the service account

    $ gcloud auth application-default print-access-token  \
       --impersonate-service-account \
          gcs-read-only@${PROJECT_ID}.iam.gserviceaccount.com  

    ya29.c.c0ASRK0GbAFEewXD [truncated]

4. Update access_token setting

hit CTRL-C when you see waiting for code. This will save the config
without doing oauth flow

    rclone config update ${REMOTE_NAME} access_token ya29.c.c0Axxxx

5. Run rclone as usual

    rclone ls dev-gcs:${MY_BUCKET}/

More Info on Service Accounts

-   Official GCS Docs
-   Guide on Service Accounts using Key Files (less secure, but similar
    concepts)

Anonymous Access

For downloads of objects that permit public access you can configure
rclone to use anonymous access by setting anonymous to true. With
unauthorized access you can't write or create files but only read or
list those buckets and objects that have public read access.

Application Default Credentials

If no other source of credentials is provided, rclone will fall back to
Application Default Credentials this is useful both when you already
have configured authentication for your developer account, or in
production when running on a google compute host. Note that if running
in docker, you may need to run additional commands on your google
compute machine - see this page.

Note that in the case application default credentials are used, there is
no need to explicitly configure a project number.

--fast-list

This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

Custom upload headers

You can set custom upload headers with the --header-upload flag. Google
Cloud Storage supports the headers as described in the working with
metadata documentation

-   Cache-Control
-   Content-Disposition
-   Content-Encoding
-   Content-Language
-   Content-Type
-   X-Goog-Storage-Class
-   X-Goog-Meta-

Eg --header-upload "Content-Type text/potato"

Note that the last of these is for setting custom metadata in the form
--header-upload "x-goog-meta-key: value"

Modification times

Google Cloud Storage stores md5sum natively. Google's gsutil tool stores
modification time with one-second precision as goog-reserved-file-mtime
in file metadata.

To ensure compatibility with gsutil, rclone stores modification time in
2 separate metadata entries. mtime uses RFC3339 format with
one-nanosecond precision. goog-reserved-file-mtime uses Unix timestamp
format with one-second precision. To get modification time from object
metadata, rclone reads the metadata in the following order: mtime,
goog-reserved-file-mtime, object updated time.

Note that rclone's default modify window is 1ns. Files uploaded by
gsutil only contain timestamps with one-second precision. If you use
rclone to sync files previously uploaded by gsutil, rclone will attempt
to update modification time for all these files. To avoid these possibly
unnecessary updates, use --modify-window 1s.

Restricted filename characters

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  LF           0x0A         ␊
  CR           0x0D         ␍
  /            0x2F        ／

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to google cloud storage (Google
Cloud Storage (this is not Google Drive)).

--gcs-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_GCS_CLIENT_ID
-   Type: string
-   Required: false

--gcs-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_GCS_CLIENT_SECRET
-   Type: string
-   Required: false

--gcs-project-number

Project number.

Optional - needed only for list/create/delete buckets - see your
developer console.

Properties:

-   Config: project_number
-   Env Var: RCLONE_GCS_PROJECT_NUMBER
-   Type: string
-   Required: false

--gcs-user-project

User project.

Optional - needed only for requester pays.

Properties:

-   Config: user_project
-   Env Var: RCLONE_GCS_USER_PROJECT
-   Type: string
-   Required: false

--gcs-service-account-file

Service Account Credentials JSON file path.

Leave blank normally. Needed only if you want use SA instead of
interactive login.

Leading ~ will be expanded in the file name as will environment
variables such as ${RCLONE_CONFIG_DIR}.

Properties:

-   Config: service_account_file
-   Env Var: RCLONE_GCS_SERVICE_ACCOUNT_FILE
-   Type: string
-   Required: false

--gcs-service-account-credentials

Service Account Credentials JSON blob.

Leave blank normally. Needed only if you want use SA instead of
interactive login.

Properties:

-   Config: service_account_credentials
-   Env Var: RCLONE_GCS_SERVICE_ACCOUNT_CREDENTIALS
-   Type: string
-   Required: false

--gcs-anonymous

Access public buckets and objects without credentials.

Set to 'true' if you just want to download files and don't configure
credentials.

Properties:

-   Config: anonymous
-   Env Var: RCLONE_GCS_ANONYMOUS
-   Type: bool
-   Default: false

--gcs-object-acl

Access Control List for new objects.

Properties:

-   Config: object_acl
-   Env Var: RCLONE_GCS_OBJECT_ACL
-   Type: string
-   Required: false
-   Examples:
    -   "authenticatedRead"
        -   Object owner gets OWNER access.
        -   All Authenticated Users get READER access.
    -   "bucketOwnerFullControl"
        -   Object owner gets OWNER access.
        -   Project team owners get OWNER access.
    -   "bucketOwnerRead"
        -   Object owner gets OWNER access.
        -   Project team owners get READER access.
    -   "private"
        -   Object owner gets OWNER access.
        -   Default if left blank.
    -   "projectPrivate"
        -   Object owner gets OWNER access.
        -   Project team members get access according to their roles.
    -   "publicRead"
        -   Object owner gets OWNER access.
        -   All Users get READER access.

--gcs-bucket-acl

Access Control List for new buckets.

Properties:

-   Config: bucket_acl
-   Env Var: RCLONE_GCS_BUCKET_ACL
-   Type: string
-   Required: false
-   Examples:
    -   "authenticatedRead"
        -   Project team owners get OWNER access.
        -   All Authenticated Users get READER access.
    -   "private"
        -   Project team owners get OWNER access.
        -   Default if left blank.
    -   "projectPrivate"
        -   Project team members get access according to their roles.
    -   "publicRead"
        -   Project team owners get OWNER access.
        -   All Users get READER access.
    -   "publicReadWrite"
        -   Project team owners get OWNER access.
        -   All Users get WRITER access.

--gcs-bucket-policy-only

Access checks should use bucket-level IAM policies.

If you want to upload objects to a bucket with Bucket Policy Only set
then you will need to set this.

When it is set, rclone:

-   ignores ACLs set on buckets
-   ignores ACLs set on objects
-   creates buckets with Bucket Policy Only set

Docs: https://cloud.google.com/storage/docs/bucket-policy-only

Properties:

-   Config: bucket_policy_only
-   Env Var: RCLONE_GCS_BUCKET_POLICY_ONLY
-   Type: bool
-   Default: false

--gcs-location

Location for the newly created buckets.

Properties:

-   Config: location
-   Env Var: RCLONE_GCS_LOCATION
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   Empty for default location (US)
    -   "asia"
        -   Multi-regional location for Asia
    -   "eu"
        -   Multi-regional location for Europe
    -   "us"
        -   Multi-regional location for United States
    -   "asia-east1"
        -   Taiwan
    -   "asia-east2"
        -   Hong Kong
    -   "asia-northeast1"
        -   Tokyo
    -   "asia-northeast2"
        -   Osaka
    -   "asia-northeast3"
        -   Seoul
    -   "asia-south1"
        -   Mumbai
    -   "asia-south2"
        -   Delhi
    -   "asia-southeast1"
        -   Singapore
    -   "asia-southeast2"
        -   Jakarta
    -   "australia-southeast1"
        -   Sydney
    -   "australia-southeast2"
        -   Melbourne
    -   "europe-north1"
        -   Finland
    -   "europe-west1"
        -   Belgium
    -   "europe-west2"
        -   London
    -   "europe-west3"
        -   Frankfurt
    -   "europe-west4"
        -   Netherlands
    -   "europe-west6"
        -   Zürich
    -   "europe-central2"
        -   Warsaw
    -   "us-central1"
        -   Iowa
    -   "us-east1"
        -   South Carolina
    -   "us-east4"
        -   Northern Virginia
    -   "us-east5"
        -   Ohio
    -   "us-west1"
        -   Oregon
    -   "us-west2"
        -   California
    -   "us-west3"
        -   Salt Lake City
    -   "us-west4"
        -   Las Vegas
    -   "northamerica-northeast1"
        -   Montréal
    -   "northamerica-northeast2"
        -   Toronto
    -   "southamerica-east1"
        -   São Paulo
    -   "southamerica-west1"
        -   Santiago
    -   "asia1"
        -   Dual region: asia-northeast1 and asia-northeast2.
    -   "eur4"
        -   Dual region: europe-north1 and europe-west4.
    -   "nam4"
        -   Dual region: us-central1 and us-east1.

--gcs-storage-class

The storage class to use when storing objects in Google Cloud Storage.

Properties:

-   Config: storage_class
-   Env Var: RCLONE_GCS_STORAGE_CLASS
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   Default
    -   "MULTI_REGIONAL"
        -   Multi-regional storage class
    -   "REGIONAL"
        -   Regional storage class
    -   "NEARLINE"
        -   Nearline storage class
    -   "COLDLINE"
        -   Coldline storage class
    -   "ARCHIVE"
        -   Archive storage class
    -   "DURABLE_REDUCED_AVAILABILITY"
        -   Durable reduced availability storage class

--gcs-env-auth

Get GCP IAM credentials from runtime (environment variables or instance
meta data if no env vars).

Only applies if service_account_file and service_account_credentials is
blank.

Properties:

-   Config: env_auth
-   Env Var: RCLONE_GCS_ENV_AUTH
-   Type: bool
-   Default: false
-   Examples:
    -   "false"
        -   Enter credentials in the next step.
    -   "true"
        -   Get GCP IAM credentials from the environment (env vars or
            IAM).

Advanced options

Here are the Advanced options specific to google cloud storage (Google
Cloud Storage (this is not Google Drive)).

--gcs-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_GCS_TOKEN
-   Type: string
-   Required: false

--gcs-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_GCS_AUTH_URL
-   Type: string
-   Required: false

--gcs-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_GCS_TOKEN_URL
-   Type: string
-   Required: false

--gcs-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_GCS_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--gcs-access-token

Short-lived access token.

Leave blank normally. Needed only if you want use short-lived access
token instead of interactive login.

Properties:

-   Config: access_token
-   Env Var: RCLONE_GCS_ACCESS_TOKEN
-   Type: string
-   Required: false

--gcs-directory-markers

Upload an empty object with a trailing slash when a new directory is
created

Empty folders are unsupported for bucket based remotes, this option
creates an empty object ending with "/", to persist the folder.

Properties:

-   Config: directory_markers
-   Env Var: RCLONE_GCS_DIRECTORY_MARKERS
-   Type: bool
-   Default: false

--gcs-no-check-bucket

If set, don't attempt to check the bucket exists or create it.

This can be useful when trying to minimise the number of transactions
rclone does if you know the bucket exists already.

Properties:

-   Config: no_check_bucket
-   Env Var: RCLONE_GCS_NO_CHECK_BUCKET
-   Type: bool
-   Default: false

--gcs-decompress

If set this will decompress gzip encoded objects.

It is possible to upload objects to GCS with "Content-Encoding: gzip"
set. Normally rclone will download these files as compressed objects.

If this flag is set then rclone will decompress these files with
"Content-Encoding: gzip" as they are received. This means that rclone
can't check the size and hash but the file contents will be
decompressed.

Properties:

-   Config: decompress
-   Env Var: RCLONE_GCS_DECOMPRESS
-   Type: bool
-   Default: false

--gcs-endpoint

Custom endpoint for the storage API. Leave blank to use the provider
default.

When using a custom endpoint that includes a subpath (e.g.
example.org/custom/endpoint), the subpath will be ignored during upload
operations due to a limitation in the underlying Google API Go client
library. Download and listing operations will work correctly with the
full endpoint path. If you require subpath support for uploads, avoid
using subpaths in your custom endpoint configuration.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_GCS_ENDPOINT
-   Type: string
-   Required: false
-   Examples:
    -   "storage.example.org"
        -   Specify a custom endpoint
    -   "storage.example.org:4443"
        -   Specifying a custom endpoint with port
    -   "storage.example.org:4443/gcs/api"
        -   Specifying a subpath, see the note, uploads won't use the
            custom path!

--gcs-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_GCS_ENCODING
-   Type: Encoding
-   Default: Slash,CrLf,InvalidUtf8,Dot

--gcs-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_GCS_DESCRIPTION
-   Type: string
-   Required: false

Limitations

rclone about is not supported by the Google Cloud Storage backend.
Backends without this capability cannot determine free space for an
rclone mount or use policy mfs (most free space) as a member of an
rclone union remote.

See List of backends that do not support rclone about and rclone about.

Google Drive

Paths are specified as drive:path

Drive paths may be as deep as required, e.g.
drive:directory/subdirectory.

Configuration

The initial setup for drive involves getting a token from Google drive
which you need to do in your browser. rclone config walks you through
it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    n/r/c/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Google Drive
       \ "drive"
    [snip]
    Storage> drive
    Google Application Client Id - leave blank normally.
    client_id>
    Google Application Client Secret - leave blank normally.
    client_secret>
    Scope that rclone should use when requesting access from drive.
    Choose a number from below, or type in your own value
     1 / Full access all files, excluding Application Data Folder.
       \ "drive"
     2 / Read-only access to file metadata and file contents.
       \ "drive.readonly"
       / Access to files created by rclone only.
     3 | These are visible in the drive website.
       | File authorization is revoked when the user deauthorizes the app.
       \ "drive.file"
       / Allows read and write access to the Application Data folder.
     4 | This is not visible in the drive website.
       \ "drive.appfolder"
       / Allows read-only access to file metadata but
     5 | does not allow any access to read or download file content.
       \ "drive.metadata.readonly"
    scope> 1
    Service Account Credentials JSON file path - needed only if you want use SA instead of interactive login.
    service_account_file>
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configure this as a Shared Drive (Team Drive)?
    y) Yes
    n) No
    y/n> n
    Configuration complete.
    Options:
    type: drive
    - client_id:
    - client_secret:
    - scope: drive
    - root_folder_id:
    - service_account_file:
    - token: {"access_token":"XXX","token_type":"Bearer","refresh_token":"XXX","expiry":"2014-03-16T13:57:58.955387075Z"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Google if using web browser to automatically
authenticate. This only runs from the moment it opens your browser to
the moment you get back the verification code. This is on
http://127.0.0.1:53682/ and it may require you to unblock it temporarily
if you are running a host firewall, or use manual mode.

You can then use it like this,

List directories in top level of your drive

    rclone lsd remote:

List all the files in your drive

    rclone ls remote:

To copy a local directory to a drive directory called backup

    rclone copy /home/source remote:backup

Scopes

Rclone allows you to select which scope you would like for rclone to
use. This changes what type of token is granted to rclone. The scopes
are defined here.

A comma-separated list is allowed e.g. drive.readonly,drive.file.

The scope are

drive

This is the default scope and allows full access to all files, except
for the Application Data Folder (see below).

Choose this one if you aren't sure.

drive.readonly

This allows read only access to all files. Files may be listed and
downloaded but not uploaded, renamed or deleted.

drive.file

With this scope rclone can read/view/modify only those files and folders
it creates.

So if you uploaded files to drive via the web interface (or any other
means) they will not be visible to rclone.

This can be useful if you are using rclone to backup data and you want
to be sure confidential data on your drive is not visible to rclone.

Files created with this scope are visible in the web interface.

drive.appfolder

This gives rclone its own private area to store files. Rclone will not
be able to see any other files on your drive and you won't be able to
see rclone's files from the web interface either.

drive.metadata.readonly

This allows read only access to file names only. It does not allow
rclone to download or upload data, or rename or delete files or
directories.

Root folder ID

This option has been moved to the advanced section. You can set the
root_folder_id for rclone. This is the directory (identified by its
Folder ID) that rclone considers to be the root of your drive.

Normally you will leave this blank and rclone will determine the correct
root to use itself.

However you can set this to restrict rclone to a specific folder
hierarchy or to access data within the "Computers" tab on the drive web
interface (where files from Google's Backup and Sync desktop program
go).

In order to do this you will have to find the Folder ID of the directory
you wish rclone to display. This will be the last segment of the URL
when you open the relevant folder in the drive web interface.

So if the folder you want rclone to use has a URL which looks like
https://drive.google.com/drive/folders/1XyfxxxxxxxxxxxxxxxxxxxxxxxxxKHCh
in the browser, then you use 1XyfxxxxxxxxxxxxxxxxxxxxxxxxxKHCh as the
root_folder_id in the config.

NB folders under the "Computers" tab seem to be read only (drive gives a
500 error) when using rclone.

There doesn't appear to be an API to discover the folder IDs of the
"Computers" tab - please contact us if you know otherwise!

Note also that rclone can't access any data under the "Backups" tab on
the google drive web interface yet.

Service Account support

You can set up rclone with Google Drive in an unattended mode, i.e. not
tied to a specific end-user Google account. This is useful when you want
to synchronise files onto machines that don't have actively logged-in
users, for example build machines.

To use a Service Account instead of OAuth2 token flow, enter the path to
your Service Account credentials at the service_account_file prompt
during rclone config and rclone won't use the browser based
authentication flow. If you'd rather stuff the contents of the
credentials file into the rclone config file, you can set
service_account_credentials with the actual contents of the file
instead, or set the equivalent environment variable.

Use case - Google Workspace account and individual Drive

Let's say that you are the administrator of a Google Workspace. The goal
is to read or write data on an individual's Drive account, who IS a
member of the domain. We'll call the domain <example.com>, and the user
foo@example.com.

There's a few steps we need to go through to accomplish this:

1. Create a service account for example.com

-   To create a service account and obtain its credentials, go to the
    Google Developer Console.
-   You must have a project - create one if you don't and make sure you
    are on the selected project.
-   Then go to "IAM & admin" -> "Service Accounts".
-   Use the "Create Service Account" button. Fill in "Service account
    name" and "Service account ID" with something that identifies your
    client.
-   Select "Create And Continue". Step 2 and 3 are optional.
-   Click on the newly created service account
-   Click "Keys" and then "Add Key" and then "Create new key"
-   Choose type "JSON" and click create
-   This will download a small JSON file that rclone will use for
    authentication.

If you ever need to remove access, press the "Delete service account
key" button.

2. Allowing API access to example.com Google Drive

-   Go to example.com's Workspace Admin Console
-   Go into "Security" (or use the search bar)
-   Select "Access and data control" and then "API controls"
-   Click "Manage domain-wide delegation"
-   Click "Add new"
-   In the "Client ID" field enter the service account's "Client ID" -
    this can be found in the Developer Console under "IAM & Admin" ->
    "Service Accounts", then "View Client ID" for the newly created
    service account. It is a ~21 character numerical string.
-   In the next field, "OAuth Scopes", enter
    https://www.googleapis.com/auth/drive to grant read/write access to
    Google Drive specifically. You can also use
    https://www.googleapis.com/auth/drive.readonly for read only access
    with --drive-scope=drive.readonly.
-   Click "Authorise"

3. Configure rclone, assuming a new install

    rclone config

    n/s/q> n         # New
    name>gdrive      # Gdrive is an example name
    Storage>         # Type drive
    client_id>       # Can be left blank
    client_secret>   # Can be left blank
    scope>           # Select the scope use used in step 2
    root_folder_id>  # Can be left blank
    service_account_file> /home/foo/myJSONfile.json # Path to the JSON file you downloaded in step 1.
    y/n>             # Auto config, n

4. Verify that it's working

-   rclone -v --drive-impersonate foo@example.com lsf gdrive:backup
-   The arguments do:
    -   -v - verbose logging
    -   --drive-impersonate foo@example.com - this is what does the
        magic, pretending to be user foo.
    -   lsf - list files in a parsing friendly way
    -   gdrive:backup - use the remote called gdrive, work in the folder
        named backup.

Note: in case you configured a specific root folder on gdrive and rclone
is unable to access the contents of that folder when using
--drive-impersonate, do this instead:

-   in the gdrive web interface, share your root folder with the
    user/email of the new Service Account you created/selected at step 1
-   use rclone without specifying the --drive-impersonate option, like
    this: rclone -v lsf gdrive:backup

Shared drives (team drives)

If you want to configure the remote to point to a Google Shared Drive
(previously known as Team Drives) then answer y to the question
Configure this as a Shared Drive (Team Drive)?.

This will fetch the list of Shared Drives from google and allow you to
configure which one you want to use. You can also type in a Shared Drive
ID if you prefer.

For example:

    Configure this as a Shared Drive (Team Drive)?
    y) Yes
    n) No
    y/n> y
    Fetching Shared Drive list...
    Choose a number from below, or type in your own value
     1 / Rclone Test
       \ "xxxxxxxxxxxxxxxxxxxx"
     2 / Rclone Test 2
       \ "yyyyyyyyyyyyyyyyyyyy"
     3 / Rclone Test 3
       \ "zzzzzzzzzzzzzzzzzzzz"
    Enter a Shared Drive ID> 1
    Configuration complete.
    Options:
    - type: drive
    - client_id:
    - client_secret:
    - token: {"AccessToken":"xxxx.x.xxxxx_xxxxxxxxxxx_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","RefreshToken":"1/xxxxxxxxxxxxxxxx_xxxxxxxxxxxxxxxxxxxxxxxxxx","Expiry":"2014-03-16T13:57:58.955387075Z","Extra":null}
    - team_drive: xxxxxxxxxxxxxxxxxxxx
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

--fast-list

This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

It does this by combining multiple list calls into a single API request.

This works by combining many '%s' in parents filters into one
expression. To list the contents of directories a, b and c, the
following requests will be send by the regular List function:

    trashed=false and 'a' in parents
    trashed=false and 'b' in parents
    trashed=false and 'c' in parents

These can now be combined into a single request:

    trashed=false and ('a' in parents or 'b' in parents or 'c' in parents)

The implementation of ListR will put up to 50 parents filters into one
request. It will use the --checkers value to specify the number of
requests to run in parallel.

In tests, these batch requests were up to 20x faster than the regular
method. Running the following command against different sized folders
gives:

    rclone lsjson -vv -R --checkers=6 gdrive:folder

small folder (220 directories, 700 files):

-   without --fast-list: 38s
-   with --fast-list: 10s

large folder (10600 directories, 39000 files):

-   without --fast-list: 22:05 min
-   with --fast-list: 58s

Modification times and hashes

Google drive stores modification times accurate to 1 ms.

Hash algorithms MD5, SHA1 and SHA256 are supported. Note, however, that
a small fraction of files uploaded may not have SHA1 or SHA256 hashes
especially if they were uploaded before 2018.

Restricted filename characters

Only Invalid UTF-8 bytes will be replaced, as they can't be used in JSON
strings.

In contrast to other backends, / can also be used in names and . or ..
are valid names.

Revisions

Google drive stores revisions of files. When you upload a change to an
existing file to google drive using rclone it will create a new revision
of that file.

Revisions follow the standard google policy which at time of writing was

-   They are deleted after 30 days or 100 revisions (whatever comes
    first).
-   They do not count towards a user storage quota.

Deleting files

By default rclone will send all files to the trash when deleting files.
If deleting them permanently is required then use the
--drive-use-trash=false flag, or set the equivalent environment
variable.

Shortcuts

In March 2020 Google introduced a new feature in Google Drive called
drive shortcuts (API). These will (by September 2020) replace the
ability for files or folders to be in multiple folders at once.

Shortcuts are files that link to other files on Google Drive somewhat
like a symlink in unix, except they point to the underlying file data
(e.g. the inode in unix terms) so they don't break if the source is
renamed or moved about.

By default rclone treats these as follows.

For shortcuts pointing to files:

-   When listing a file shortcut appears as the destination file.
-   When downloading the contents of the destination file is downloaded.
-   When updating shortcut file with a non shortcut file, the shortcut
    is removed then a new file is uploaded in place of the shortcut.
-   When server-side moving (renaming) the shortcut is renamed, not the
    destination file.
-   When server-side copying the shortcut is copied, not the contents of
    the shortcut. (unless --drive-copy-shortcut-content is in use in
    which case the contents of the shortcut gets copied).
-   When deleting the shortcut is deleted not the linked file.
-   When setting the modification time, the modification time of the
    linked file will be set.

For shortcuts pointing to folders:

-   When listing the shortcut appears as a folder and that folder will
    contain the contents of the linked folder appear (including any sub
    folders)
-   When downloading the contents of the linked folder and sub contents
    are downloaded
-   When uploading to a shortcut folder the file will be placed in the
    linked folder
-   When server-side moving (renaming) the shortcut is renamed, not the
    destination folder
-   When server-side copying the contents of the linked folder is
    copied, not the shortcut.
-   When deleting with rclone rmdir or rclone purge the shortcut is
    deleted not the linked folder.
-   NB When deleting with rclone remove or rclone mount the contents of
    the linked folder will be deleted.

The rclone backend command can be used to create shortcuts.

Shortcuts can be completely ignored with the --drive-skip-shortcuts flag
or the corresponding skip_shortcuts configuration setting.

If you have shortcuts that lead to an infinite recursion in your drive
(e.g. a shortcut pointing to a parent folder), skip_shortcuts might be
mandatory to be able to copy the drive.

Emptying trash

If you wish to empty your trash you can use the rclone cleanup remote:
command which will permanently delete all your trashed files. This
command does not take any path arguments.

Note that Google Drive takes some time (minutes to days) to empty the
trash even though the command returns within a few seconds. No output is
echoed, so there will be no confirmation even using -v or -vv.

Quota information

To view your current quota you can use the rclone about remote: command
which will display your usage limit (quota), the usage in Google Drive,
the size of all files in the Trash and the space used by other Google
services such as Gmail. This command does not take any path arguments.

Import/Export of google documents

Google documents can be exported from and uploaded to Google Drive.

When rclone downloads a Google doc it chooses a format to download
depending upon the --drive-export-formats setting. By default the export
formats are docx,xlsx,pptx,svg which are a sensible default for an
editable document.

When choosing a format, rclone runs down the list provided in order and
chooses the first file format the doc can be exported as from the list.
If the file can't be exported to a format on the formats list, then
rclone will choose a format from the default list.

If you prefer an archive copy then you might use
--drive-export-formats pdf, or if you prefer openoffice/libreoffice
formats you might use --drive-export-formats ods,odt,odp.

Note that rclone adds the extension to the google doc, so if it is
called My Spreadsheet on google docs, it will be exported as
My Spreadsheet.xlsx or My Spreadsheet.pdf etc.

When importing files into Google Drive, rclone will convert all files
with an extension in --drive-import-formats to their associated document
type. rclone will not convert any files by default, since the conversion
is lossy process.

The conversion must result in a file with the same extension when the
--drive-export-formats rules are applied to the uploaded document.

Here are some examples for allowed and prohibited conversions.

  -------------------------------------------------------------------------
  export-formats    import-formats    Upload Ext   Document Ext   Allowed
  ----------------- ----------------- ------------ -------------- ---------
  odt               odt               odt          odt            Yes

  odt               docx,odt          odt          odt            Yes

                    docx              docx         docx           Yes

                    odt               odt          docx           No

  odt,docx          docx,odt          docx         odt            No

  docx,odt          docx,odt          docx         docx           Yes

  docx,odt          docx,odt          odt          docx           No
  -------------------------------------------------------------------------

This limitation can be disabled by specifying
--drive-allow-import-name-change. When using this flag, rclone can
convert multiple files types resulting in the same document type at
once, e.g. with --drive-import-formats docx,odt,txt, all files having
these extension would result in a document represented as a docx file.
This brings the additional risk of overwriting a document, if multiple
files have the same stem. Many rclone operations will not handle this
name change in any way. They assume an equal name when copying files and
might copy the file again or delete them when the name changes.

Here are the possible export extensions with their corresponding mime
types. Most of these can also be used for importing, but there more that
are not listed here. Some of these additional ones might only be
available when the operating system provides the correct MIME type
entries.

This list can be changed by Google Drive at any time and might not
represent the currently available conversions.

  --------------------------------------------------------------------------------------------------------------------------
  Extension           Mime Type                                                                   Description
  ------------------- --------------------------------------------------------------------------- --------------------------
  bmp                 image/bmp                                                                   Windows Bitmap format

  csv                 text/csv                                                                    Standard CSV format for
                                                                                                  Spreadsheets

  doc                 application/msword                                                          Classic Word file

  docx                application/vnd.openxmlformats-officedocument.wordprocessingml.document     Microsoft Office Document

  epub                application/epub+zip                                                        E-book format

  html                text/html                                                                   An HTML Document

  jpg                 image/jpeg                                                                  A JPEG Image File

  json                application/vnd.google-apps.script+json                                     JSON Text Format for
                                                                                                  Google Apps scripts

  md                  text/markdown                                                               Markdown Text Format

  odp                 application/vnd.oasis.opendocument.presentation                             Openoffice Presentation

  ods                 application/vnd.oasis.opendocument.spreadsheet                              Openoffice Spreadsheet

  ods                 application/x-vnd.oasis.opendocument.spreadsheet                            Openoffice Spreadsheet

  odt                 application/vnd.oasis.opendocument.text                                     Openoffice Document

  pdf                 application/pdf                                                             Adobe PDF Format

  pjpeg               image/pjpeg                                                                 Progressive JPEG Image

  png                 image/png                                                                   PNG Image Format

  pptx                application/vnd.openxmlformats-officedocument.presentationml.presentation   Microsoft Office
                                                                                                  Powerpoint

  rtf                 application/rtf                                                             Rich Text Format

  svg                 image/svg+xml                                                               Scalable Vector Graphics
                                                                                                  Format

  tsv                 text/tab-separated-values                                                   Standard TSV format for
                                                                                                  spreadsheets

  txt                 text/plain                                                                  Plain Text

  wmf                 application/x-msmetafile                                                    Windows Meta File

  xls                 application/vnd.ms-excel                                                    Classic Excel file

  xlsx                application/vnd.openxmlformats-officedocument.spreadsheetml.sheet           Microsoft Office
                                                                                                  Spreadsheet

  zip                 application/zip                                                             A ZIP file of HTML, Images
                                                                                                  CSS
  --------------------------------------------------------------------------------------------------------------------------

Google documents can also be exported as link files. These files will
open a browser window for the Google Docs website of that document when
opened. The link file extension has to be specified as a
--drive-export-formats parameter. They will match all available Google
Documents.

  Extension   Description                               OS Support
  ----------- ----------------------------------------- ----------------
  desktop     freedesktop.org specified desktop entry   Linux
  link.html   An HTML Document with a redirect          All
  url         INI style link file                       macOS, Windows
  webloc      macOS specific XML format                 macOS

Standard options

Here are the Standard options specific to drive (Google Drive).

--drive-client-id

Google Application Client Id Setting your own is recommended. See
https://rclone.org/drive/#making-your-own-client-id for how to create
your own. If you leave this blank, it will use an internal key which is
low performance.

Properties:

-   Config: client_id
-   Env Var: RCLONE_DRIVE_CLIENT_ID
-   Type: string
-   Required: false

--drive-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_DRIVE_CLIENT_SECRET
-   Type: string
-   Required: false

--drive-scope

Comma separated list of scopes that rclone should use when requesting
access from drive.

Properties:

-   Config: scope
-   Env Var: RCLONE_DRIVE_SCOPE
-   Type: string
-   Required: false
-   Examples:
    -   "drive"
        -   Full access all files, excluding Application Data Folder.
    -   "drive.readonly"
        -   Read-only access to file metadata and file contents.
    -   "drive.file"
        -   Access to files created by rclone only.
        -   These are visible in the drive website.
        -   File authorization is revoked when the user deauthorizes the
            app.
    -   "drive.appfolder"
        -   Allows read and write access to the Application Data folder.
        -   This is not visible in the drive website.
    -   "drive.metadata.readonly"
        -   Allows read-only access to file metadata but
        -   does not allow any access to read or download file content.

--drive-service-account-file

Service Account Credentials JSON file path.

Leave blank normally. Needed only if you want use SA instead of
interactive login.

Leading ~ will be expanded in the file name as will environment
variables such as ${RCLONE_CONFIG_DIR}.

Properties:

-   Config: service_account_file
-   Env Var: RCLONE_DRIVE_SERVICE_ACCOUNT_FILE
-   Type: string
-   Required: false

--drive-alternate-export

Deprecated: No longer needed.

Properties:

-   Config: alternate_export
-   Env Var: RCLONE_DRIVE_ALTERNATE_EXPORT
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to drive (Google Drive).

--drive-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_DRIVE_TOKEN
-   Type: string
-   Required: false

--drive-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_DRIVE_AUTH_URL
-   Type: string
-   Required: false

--drive-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_DRIVE_TOKEN_URL
-   Type: string
-   Required: false

--drive-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_DRIVE_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--drive-root-folder-id

ID of the root folder. Leave blank normally.

Fill in to access "Computers" folders (see docs), or for rclone to use a
non root folder as its starting point.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_DRIVE_ROOT_FOLDER_ID
-   Type: string
-   Required: false

--drive-service-account-credentials

Service Account Credentials JSON blob.

Leave blank normally. Needed only if you want use SA instead of
interactive login.

Properties:

-   Config: service_account_credentials
-   Env Var: RCLONE_DRIVE_SERVICE_ACCOUNT_CREDENTIALS
-   Type: string
-   Required: false

--drive-team-drive

ID of the Shared Drive (Team Drive).

Properties:

-   Config: team_drive
-   Env Var: RCLONE_DRIVE_TEAM_DRIVE
-   Type: string
-   Required: false

--drive-auth-owner-only

Only consider files owned by the authenticated user.

Properties:

-   Config: auth_owner_only
-   Env Var: RCLONE_DRIVE_AUTH_OWNER_ONLY
-   Type: bool
-   Default: false

--drive-use-trash

Send files to the trash instead of deleting permanently.

Defaults to true, namely sending files to the trash. Use
--drive-use-trash=false to delete files permanently instead.

Properties:

-   Config: use_trash
-   Env Var: RCLONE_DRIVE_USE_TRASH
-   Type: bool
-   Default: true

--drive-copy-shortcut-content

Server side copy contents of shortcuts instead of the shortcut.

When doing server side copies, normally rclone will copy shortcuts as
shortcuts.

If this flag is used then rclone will copy the contents of shortcuts
rather than shortcuts themselves when doing server side copies.

Properties:

-   Config: copy_shortcut_content
-   Env Var: RCLONE_DRIVE_COPY_SHORTCUT_CONTENT
-   Type: bool
-   Default: false

--drive-skip-gdocs

Skip google documents in all listings.

If given, gdocs practically become invisible to rclone.

Properties:

-   Config: skip_gdocs
-   Env Var: RCLONE_DRIVE_SKIP_GDOCS
-   Type: bool
-   Default: false

--drive-show-all-gdocs

Show all Google Docs including non-exportable ones in listings.

If you try a server side copy on a Google Form without this flag, you
will get this error:

    No export formats found for "application/vnd.google-apps.form"

However adding this flag will allow the form to be server side copied.

Note that rclone doesn't add extensions to the Google Docs file names in
this mode.

Do not use this flag when trying to download Google Docs - rclone will
fail to download them.

Properties:

-   Config: show_all_gdocs
-   Env Var: RCLONE_DRIVE_SHOW_ALL_GDOCS
-   Type: bool
-   Default: false

--drive-skip-checksum-gphotos

Skip checksums on Google photos and videos only.

Use this if you get checksum errors when transferring Google photos or
videos.

Setting this flag will cause Google photos and videos to return a blank
checksums.

Google photos are identified by being in the "photos" space.

Corrupted checksums are caused by Google modifying the image/video but
not updating the checksum.

Properties:

-   Config: skip_checksum_gphotos
-   Env Var: RCLONE_DRIVE_SKIP_CHECKSUM_GPHOTOS
-   Type: bool
-   Default: false

--drive-shared-with-me

Only show files that are shared with me.

Instructs rclone to operate on your "Shared with me" folder (where
Google Drive lets you access the files and folders others have shared
with you).

This works both with the "list" (lsd, lsl, etc.) and the "copy" commands
(copy, sync, etc.), and with all other commands too.

Properties:

-   Config: shared_with_me
-   Env Var: RCLONE_DRIVE_SHARED_WITH_ME
-   Type: bool
-   Default: false

--drive-trashed-only

Only show files that are in the trash.

This will show trashed files in their original directory structure.

Properties:

-   Config: trashed_only
-   Env Var: RCLONE_DRIVE_TRASHED_ONLY
-   Type: bool
-   Default: false

--drive-starred-only

Only show files that are starred.

Properties:

-   Config: starred_only
-   Env Var: RCLONE_DRIVE_STARRED_ONLY
-   Type: bool
-   Default: false

--drive-formats

Deprecated: See export_formats.

Properties:

-   Config: formats
-   Env Var: RCLONE_DRIVE_FORMATS
-   Type: string
-   Required: false

--drive-export-formats

Comma separated list of preferred formats for downloading Google docs.

Properties:

-   Config: export_formats
-   Env Var: RCLONE_DRIVE_EXPORT_FORMATS
-   Type: string
-   Default: "docx,xlsx,pptx,svg"

--drive-import-formats

Comma separated list of preferred formats for uploading Google docs.

Properties:

-   Config: import_formats
-   Env Var: RCLONE_DRIVE_IMPORT_FORMATS
-   Type: string
-   Required: false

--drive-allow-import-name-change

Allow the filetype to change when uploading Google docs.

E.g. file.doc to file.docx. This will confuse sync and reupload every
time.

Properties:

-   Config: allow_import_name_change
-   Env Var: RCLONE_DRIVE_ALLOW_IMPORT_NAME_CHANGE
-   Type: bool
-   Default: false

--drive-use-created-date

Use file created date instead of modified date.

Useful when downloading data and you want the creation date used in
place of the last modified date.

WARNING: This flag may have some unexpected consequences.

When uploading to your drive all files will be overwritten unless they
haven't been modified since their creation. And the inverse will occur
while downloading. This side effect can be avoided by using the
"--checksum" flag.

This feature was implemented to retain photos capture date as recorded
by google photos. You will first need to check the "Create a Google
Photos folder" option in your google drive settings. You can then copy
or move the photos locally and use the date the image was taken
(created) set as the modification date.

Properties:

-   Config: use_created_date
-   Env Var: RCLONE_DRIVE_USE_CREATED_DATE
-   Type: bool
-   Default: false

--drive-use-shared-date

Use date file was shared instead of modified date.

Note that, as with "--drive-use-created-date", this flag may have
unexpected consequences when uploading/downloading files.

If both this flag and "--drive-use-created-date" are set, the created
date is used.

Properties:

-   Config: use_shared_date
-   Env Var: RCLONE_DRIVE_USE_SHARED_DATE
-   Type: bool
-   Default: false

--drive-list-chunk

Size of listing chunk 100-1000, 0 to disable.

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_DRIVE_LIST_CHUNK
-   Type: int
-   Default: 1000

--drive-impersonate

Impersonate this user when using a service account.

Properties:

-   Config: impersonate
-   Env Var: RCLONE_DRIVE_IMPERSONATE
-   Type: string
-   Required: false

--drive-upload-cutoff

Cutoff for switching to chunked upload.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_DRIVE_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 8Mi

--drive-chunk-size

Upload chunk size.

Must a power of 2 >= 256k.

Making this larger will improve performance, but note that each chunk is
buffered in memory one per transfer.

Reducing this will reduce memory usage but decrease performance.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_DRIVE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 8Mi

--drive-acknowledge-abuse

Set to allow files which return cannotDownloadAbusiveFile to be
downloaded.

If downloading a file returns the error "This file has been identified
as malware or spam and cannot be downloaded" with the error code
"cannotDownloadAbusiveFile" then supply this flag to rclone to indicate
you acknowledge the risks of downloading the file and rclone will
download it anyway.

Note that if you are using service account it will need Manager
permission (not Content Manager) to for this flag to work. If the SA
does not have the right permission, Google will just ignore the flag.

Properties:

-   Config: acknowledge_abuse
-   Env Var: RCLONE_DRIVE_ACKNOWLEDGE_ABUSE
-   Type: bool
-   Default: false

--drive-keep-revision-forever

Keep new head revision of each file forever.

Properties:

-   Config: keep_revision_forever
-   Env Var: RCLONE_DRIVE_KEEP_REVISION_FOREVER
-   Type: bool
-   Default: false

--drive-size-as-quota

Show sizes as storage quota usage, not actual size.

Show the size of a file as the storage quota used. This is the current
version plus any older versions that have been set to keep forever.

WARNING: This flag may have some unexpected consequences.

It is not recommended to set this flag in your config - the recommended
usage is using the flag form --drive-size-as-quota when doing rclone
ls/lsl/lsf/lsjson/etc only.

If you do use this flag for syncing (not recommended) then you will need
to use --ignore size also.

Properties:

-   Config: size_as_quota
-   Env Var: RCLONE_DRIVE_SIZE_AS_QUOTA
-   Type: bool
-   Default: false

--drive-v2-download-min-size

If Object's are greater, use drive v2 API to download.

Properties:

-   Config: v2_download_min_size
-   Env Var: RCLONE_DRIVE_V2_DOWNLOAD_MIN_SIZE
-   Type: SizeSuffix
-   Default: off

--drive-pacer-min-sleep

Minimum time to sleep between API calls.

Properties:

-   Config: pacer_min_sleep
-   Env Var: RCLONE_DRIVE_PACER_MIN_SLEEP
-   Type: Duration
-   Default: 100ms

--drive-pacer-burst

Number of API calls to allow without sleeping.

Properties:

-   Config: pacer_burst
-   Env Var: RCLONE_DRIVE_PACER_BURST
-   Type: int
-   Default: 100

--drive-server-side-across-configs

Deprecated: use --server-side-across-configs instead.

Allow server-side operations (e.g. copy) to work across different drive
configs.

This can be useful if you wish to do a server-side copy between two
different Google drives. Note that this isn't enabled by default because
it isn't easy to tell if it will work between any two configurations.

Properties:

-   Config: server_side_across_configs
-   Env Var: RCLONE_DRIVE_SERVER_SIDE_ACROSS_CONFIGS
-   Type: bool
-   Default: false

--drive-disable-http2

Disable drive using http2.

There is currently an unsolved issue with the google drive backend and
HTTP/2. HTTP/2 is therefore disabled by default for the drive backend
but can be re-enabled here. When the issue is solved this flag will be
removed.

See: https://github.com/rclone/rclone/issues/3631

Properties:

-   Config: disable_http2
-   Env Var: RCLONE_DRIVE_DISABLE_HTTP2
-   Type: bool
-   Default: true

--drive-stop-on-upload-limit

Make upload limit errors be fatal.

At the time of writing it is only possible to upload 750 GiB of data to
Google Drive a day (this is an undocumented limit). When this limit is
reached Google Drive produces a slightly different error message. When
this flag is set it causes these errors to be fatal. These will stop the
in-progress sync.

Note that this detection is relying on error message strings which
Google don't document so it may break in the future.

See: https://github.com/rclone/rclone/issues/3857

Properties:

-   Config: stop_on_upload_limit
-   Env Var: RCLONE_DRIVE_STOP_ON_UPLOAD_LIMIT
-   Type: bool
-   Default: false

--drive-stop-on-download-limit

Make download limit errors be fatal.

At the time of writing it is only possible to download 10 TiB of data
from Google Drive a day (this is an undocumented limit). When this limit
is reached Google Drive produces a slightly different error message.
When this flag is set it causes these errors to be fatal. These will
stop the in-progress sync.

Note that this detection is relying on error message strings which
Google don't document so it may break in the future.

Properties:

-   Config: stop_on_download_limit
-   Env Var: RCLONE_DRIVE_STOP_ON_DOWNLOAD_LIMIT
-   Type: bool
-   Default: false

--drive-skip-shortcuts

If set skip shortcut files.

Normally rclone dereferences shortcut files making them appear as if
they are the original file (see the shortcuts section). If this flag is
set then rclone will ignore shortcut files completely.

Properties:

-   Config: skip_shortcuts
-   Env Var: RCLONE_DRIVE_SKIP_SHORTCUTS
-   Type: bool
-   Default: false

--drive-skip-dangling-shortcuts

If set skip dangling shortcut files.

If this is set then rclone will not show any dangling shortcuts in
listings.

Properties:

-   Config: skip_dangling_shortcuts
-   Env Var: RCLONE_DRIVE_SKIP_DANGLING_SHORTCUTS
-   Type: bool
-   Default: false

--drive-resource-key

Resource key for accessing a link-shared file.

If you need to access files shared with a link like this

    https://drive.google.com/drive/folders/XXX?resourcekey=YYY&usp=sharing

Then you will need to use the first part "XXX" as the "root_folder_id"
and the second part "YYY" as the "resource_key" otherwise you will get
404 not found errors when trying to access the directory.

See: https://developers.google.com/drive/api/guides/resource-keys

This resource key requirement only applies to a subset of old files.

Note also that opening the folder once in the web interface (with the
user you've authenticated rclone with) seems to be enough so that the
resource key is not needed.

Properties:

-   Config: resource_key
-   Env Var: RCLONE_DRIVE_RESOURCE_KEY
-   Type: string
-   Required: false

--drive-fast-list-bug-fix

Work around a bug in Google Drive listing.

Normally rclone will work around a bug in Google Drive when using
--fast-list (ListR) where the search "(A in parents) or (B in parents)"
returns nothing sometimes. See #3114, #4289 and
https://issuetracker.google.com/issues/149522397

Rclone detects this by finding no items in more than one directory when
listing and retries them as lists of individual directories.

This means that if you have a lot of empty directories rclone will end
up listing them all individually and this can take many more API calls.

This flag allows the work-around to be disabled. This is not recommended
in normal use - only if you have a particular case you are having
trouble with like many empty directories.

Properties:

-   Config: fast_list_bug_fix
-   Env Var: RCLONE_DRIVE_FAST_LIST_BUG_FIX
-   Type: bool
-   Default: true

--drive-metadata-owner

Control whether owner should be read or written in metadata.

Owner is a standard part of the file metadata so is easy to read. But it
isn't always desirable to set the owner from the metadata.

Note that you can't set the owner on Shared Drives, and that setting
ownership will generate an email to the new owner (this can't be
disabled), and you can't transfer ownership to someone outside your
organization.

Properties:

-   Config: metadata_owner
-   Env Var: RCLONE_DRIVE_METADATA_OWNER
-   Type: Bits
-   Default: read
-   Examples:
    -   "off"
        -   Do not read or write the value
    -   "read"
        -   Read the value only
    -   "write"
        -   Write the value only
    -   "failok"
        -   If writing fails log errors only, don't fail the transfer
    -   "read,write"
        -   Read and Write the value.

--drive-metadata-permissions

Control whether permissions should be read or written in metadata.

Reading permissions metadata from files can be done quickly, but it
isn't always desirable to set the permissions from the metadata.

Note that rclone drops any inherited permissions on Shared Drives and
any owner permission on My Drives as these are duplicated in the owner
metadata.

Properties:

-   Config: metadata_permissions
-   Env Var: RCLONE_DRIVE_METADATA_PERMISSIONS
-   Type: Bits
-   Default: off
-   Examples:
    -   "off"
        -   Do not read or write the value
    -   "read"
        -   Read the value only
    -   "write"
        -   Write the value only
    -   "failok"
        -   If writing fails log errors only, don't fail the transfer
    -   "read,write"
        -   Read and Write the value.

--drive-metadata-labels

Control whether labels should be read or written in metadata.

Reading labels metadata from files takes an extra API transaction and
will slow down listings. It isn't always desirable to set the labels
from the metadata.

The format of labels is documented in the drive API documentation at
https://developers.google.com/drive/api/reference/rest/v3/Label - rclone
just provides a JSON dump of this format.

When setting labels, the label and fields must already exist - rclone
will not create them. This means that if you are transferring labels
from two different accounts you will have to create the labels in
advance and use the metadata mapper to translate the IDs between the two
accounts.

Properties:

-   Config: metadata_labels
-   Env Var: RCLONE_DRIVE_METADATA_LABELS
-   Type: Bits
-   Default: off
-   Examples:
    -   "off"
        -   Do not read or write the value
    -   "read"
        -   Read the value only
    -   "write"
        -   Write the value only
    -   "failok"
        -   If writing fails log errors only, don't fail the transfer
    -   "read,write"
        -   Read and Write the value.

--drive-metadata-enforce-expansive-access

Whether the request should enforce expansive access rules.

From Feb 2026 this flag will be set by default so this flag can be used
for testing before then.

See:
https://developers.google.com/workspace/drive/api/guides/limited-expansive-access

Properties:

-   Config: metadata_enforce_expansive_access
-   Env Var: RCLONE_DRIVE_METADATA_ENFORCE_EXPANSIVE_ACCESS
-   Type: bool
-   Default: false

--drive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_DRIVE_ENCODING
-   Type: Encoding
-   Default: InvalidUtf8

--drive-env-auth

Get IAM credentials from runtime (environment variables or instance meta
data if no env vars).

Only applies if service_account_file and service_account_credentials is
blank.

Properties:

-   Config: env_auth
-   Env Var: RCLONE_DRIVE_ENV_AUTH
-   Type: bool
-   Default: false
-   Examples:
    -   "false"
        -   Enter credentials in the next step.
    -   "true"
        -   Get GCP IAM credentials from the environment (env vars or
            IAM).

--drive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_DRIVE_DESCRIPTION
-   Type: string
-   Required: false

Metadata

User metadata is stored in the properties field of the drive object.

Metadata is supported on files and directories.

Here are the possible system metadata items for the drive backend.

  ----------------------------------------------------------------------------------------------------------------------------------
  Name                              Help                            Type        Example                         Read Only
  --------------------------------- ------------------------------- ----------- ------------------------------- --------------------
  btime                             Time of file birth (creation)   RFC 3339    2006-01-02T15:04:05.999Z07:00   N
                                    with mS accuracy. Note that                                                 
                                    this is only writable on fresh                                              
                                    uploads - it can't be written                                               
                                    for updates.                                                                

  content-type                      The MIME type of the file.      string      text/plain                      N

  copy-requires-writer-permission   Whether the options to copy,    boolean     true                            N
                                    print, or download this file,                                               
                                    should be disabled for readers                                              
                                    and commenters.                                                             

  description                       A short description of the      string      Contract for signing            N
                                    file.                                                                       

  folder-color-rgb                  The color for a folder or a     string      881133                          N
                                    shortcut to a folder as an RGB                                              
                                    hex string.                                                                 

  labels                            Labels attached to this file in JSON        []                              N
                                    a JSON dump of Googled drive                                                
                                    format. Enable with                                                         
                                    --drive-metadata-labels.                                                    

  mtime                             Time of last modification with  RFC 3339    2006-01-02T15:04:05.999Z07:00   N
                                    mS accuracy.                                                                

  owner                             The owner of the file. Usually  string      user@example.com                N
                                    an email address. Enable with                                               
                                    --drive-metadata-owner.                                                     

  permissions                       Permissions in a JSON dump of   JSON        {}                              N
                                    Google drive format. On shared                                              
                                    drives these will only be                                                   
                                    present if they aren't                                                      
                                    inherited. Enable with                                                      
                                    --drive-metadata-permissions.                                               

  starred                           Whether the user has starred    boolean     false                           N
                                    the file.                                                                   

  viewed-by-me                      Whether the file has been       boolean     true                            Y
                                    viewed by this user.                                                        

  writers-can-share                 Whether users with only writer  boolean     false                           N
                                    permission can modify the                                                   
                                    file's permissions. Not                                                     
                                    populated and ignored when                                                  
                                    setting for items in shared                                                 
                                    drives.                                                                     
  ----------------------------------------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Backend commands

Here are the commands specific to the drive backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

get

Get command for fetching the drive config parameters.

    rclone backend get remote: [options] [<arguments>+]

This is a get command which will be used to fetch the various drive
config parameters.

Usage examples:

    rclone backend get drive: [-o service_account_file] [-o chunk_size]
    rclone rc backend/command command=get fs=drive: [-o service_account_file] [-o chunk_size]

Options:

-   "chunk_size": Show the current upload chunk size.
-   "service_account_file": Show the current service account file.

set

Set command for updating the drive config parameters.

    rclone backend set remote: [options] [<arguments>+]

This is a set command which will be used to update the various drive
config parameters.

Usage examples:

    rclone backend set drive: [-o service_account_file=sa.json] [-o chunk_size=67108864]
    rclone rc backend/command command=set fs=drive: [-o service_account_file=sa.json] [-o chunk_size=67108864]

Options:

-   "chunk_size": Update the current upload chunk size.
-   "service_account_file": Update the current service account file.

shortcut

Create shortcuts from files or directories.

    rclone backend shortcut remote: [options] [<arguments>+]

This command creates shortcuts from files or directories.

Usage examples:

    rclone backend shortcut drive: source_item destination_shortcut
    rclone backend shortcut drive: source_item -o target=drive2: destination_shortcut

In the first example this creates a shortcut from the "source_item"
which can be a file or a directory to the "destination_shortcut". The
"source_item" and the "destination_shortcut" should be relative paths
from "drive:"

In the second example this creates a shortcut from the "source_item"
relative to "drive:" to the "destination_shortcut" relative to
"drive2:". This may fail with a permission error if the user
authenticated with "drive2:" can't read files from "drive:".

Options:

-   "target": Optional target remote for the shortcut destination.

drives

List the Shared Drives available to this account.

    rclone backend drives remote: [options] [<arguments>+]

This command lists the Shared Drives (Team Drives) available to this
account.

Usage example:

    rclone backend [-o config] drives drive:

This will return a JSON list of objects like this:

    [
        {
            "id": "0ABCDEF-01234567890",
            "kind": "drive#teamDrive",
            "name": "My Drive"
        },
        {
            "id": "0ABCDEFabcdefghijkl",
            "kind": "drive#teamDrive",
            "name": "Test Drive"
        }
    ]

With the -o config parameter it will output the list in a format
suitable for adding to a config file to make aliases for all the drives
found and a combined drive.

    [My Drive]
    type = alias
    remote = drive,team_drive=0ABCDEF-01234567890,root_folder_id=:

    [Test Drive]
    type = alias
    remote = drive,team_drive=0ABCDEFabcdefghijkl,root_folder_id=:

    [AllDrives]
    type = combine
    upstreams = "My Drive=My Drive:" "Test Drive=Test Drive:"

Adding this to the rclone config file will cause those team drives to be
accessible with the aliases shown. Any illegal characters will be
substituted with "_" and duplicate names will have numbers suffixed. It
will also add a remote called AllDrives which shows all the shared
drives combined into one directory tree.

untrash

Untrash files and directories.

    rclone backend untrash remote: [options] [<arguments>+]

This command untrashes all the files and directories in the directory
passed in recursively.

Usage example:

    rclone backend untrash drive:directory
    rclone backend --interactive untrash drive:directory subdir

This takes an optional directory to trash which make this easier to use
via the API.

Use the --interactive/-i or --dry-run flag to see what would be restored
before restoring it.

Result:

    {
        "Untrashed": 17,
        "Errors": 0
    }

copyid

Copy files by ID.

    rclone backend copyid remote: [options] [<arguments>+]

This command copies files by ID.

Usage examples:

    rclone backend copyid drive: ID path
    rclone backend copyid drive: ID1 path1 ID2 path2

It copies the drive file with ID given to the path (an rclone path which
will be passed internally to rclone copyto). The ID and path pairs can
be repeated.

The path should end with a / to indicate copy the file as named to this
directory. If it doesn't end with a / then the last path component will
be used as the file name.

If the destination is a drive backend then server-side copying will be
attempted if possible.

Use the --interactive/-i or --dry-run flag to see what would be copied
before copying.

moveid

Move files by ID.

    rclone backend moveid remote: [options] [<arguments>+]

This command moves files by ID.

Usage examples:

    rclone backend moveid drive: ID path
    rclone backend moveid drive: ID1 path1 ID2 path2

It moves the drive file with ID given to the path (an rclone path which
will be passed internally to rclone moveto).

The path should end with a / to indicate move the file as named to this
directory. If it doesn't end with a / then the last path component will
be used as the file name.

If the destination is a drive backend then server-side moving will be
attempted if possible.

Use the --interactive/-i or --dry-run flag to see what would be moved
beforehand.

exportformats

Dump the export formats for debug purposes.

    rclone backend exportformats remote: [options] [<arguments>+]

importformats

Dump the import formats for debug purposes.

    rclone backend importformats remote: [options] [<arguments>+]

query

List files using Google Drive query language.

    rclone backend query remote: [options] [<arguments>+]

This command lists files based on a query.

Usage example:

    rclone backend query drive: query

The query syntax is documented at Google Drive Search query terms and
operators.

For example:

    rclone backend query drive: "'0ABc9DEFGHIJKLMNop0QRatUVW3X' in parents and name contains 'foo'"

If the query contains literal ' or  characters, these need to be escaped
with  characters. "'" becomes "'" and "" becomes "\", for example to
match a file named "foo ' .txt":

    rclone backend query drive: "name = 'foo \' \\\.txt'"

The result is a JSON array of matches, for example:

    [
        {
            "createdTime": "2017-06-29T19:58:28.537Z",
            "id": "0AxBe_CDEF4zkGHI4d0FjYko2QkD",
            "md5Checksum": "68518d16be0c6fbfab918be61d658032",
            "mimeType": "text/plain",
            "modifiedTime": "2024-02-02T10:40:02.874Z",
            "name": "foo ' \\.txt",
            "parents": [
                "0BxAe_BCDE4zkFGZpcWJGek0xbzC"
            ],
            "resourceKey": "0-ABCDEFGHIXJQpIGqBJq3MC",
            "sha1Checksum": "8f284fa768bfb4e45d076a579ab3905ab6bfa893",
            "size": "311",
            "webViewLink": "https://drive.google.com/file/d/0AxBe_CDEF4zkGHI4d0FjYko2QkD/view?usp=drivesdk\u0026resourcekey=0-ABCDEFGHIXJQpIGqBJq3MC"
        }
    ]
    ```console

    ### rescue

    Rescue or delete any orphaned files.

    ```console
    rclone backend rescue remote: [options] [<arguments>+]

This command rescues or deletes any orphaned files or directories.

Sometimes files can get orphaned in Google Drive. This means that they
are no longer in any folder in Google Drive.

This command finds those files and either rescues them to a directory
you specify or deletes them.

This can be used in 3 ways.

First, list all orphaned files:

    rclone backend rescue drive:

Second rescue all orphaned files to the directory indicated:

    rclone backend rescue drive: "relative/path/to/rescue/directory"

E.g. to rescue all orphans to a directory called "Orphans" in the top
level:

    rclone backend rescue drive: Orphans

Third delete all orphaned files to the trash:

    rclone backend rescue drive: -o delete

Limitations

Drive has quite a lot of rate limiting. This causes rclone to be limited
to transferring about 2 files per second only. Individual files may be
transferred much faster at 100s of MiB/s but lots of small files can
take a long time.

Server side copies are also subject to a separate rate limit. If you see
User rate limit exceeded errors, wait at least 24 hours and retry. You
can disable server-side copies with --disable copy to download and
upload the files if you prefer.

Limitations of Google Docs

Google docs will appear as size -1 in rclone ls, rclone ncdu etc, and as
size 0 in anything which uses the VFS layer, e.g. rclone mount and
rclone serve. When calculating directory totals, e.g. in rclone size and
rclone ncdu, they will be counted in as empty files.

This is because rclone can't find out the size of the Google docs
without downloading them.

Google docs will transfer correctly with rclone sync, rclone copy etc as
rclone knows to ignore the size when doing the transfer.

However an unfortunate consequence of this is that you may not be able
to download Google docs using rclone mount. If it doesn't work you will
get a 0 sized file. If you try again the doc may gain its correct size
and be downloadable. Whether it will work on not depends on the
application accessing the mount and the OS you are running - experiment
to find out if it does work for you!

Duplicated files

Sometimes, for no reason I've been able to track down, drive will
duplicate a file that rclone uploads. Drive unlike all the other remotes
can have duplicated files.

Duplicated files cause problems with the syncing and you will see
messages in the log about duplicates.

Use rclone dedupe to fix duplicated files.

Note that this isn't just a problem with rclone, even Google Photos on
Android duplicates files on drive sometimes.

Rclone appears to be re-copying files it shouldn't

The most likely cause of this is the duplicated file issue above - run
rclone dedupe and check your logs for duplicate object or directory
messages.

This can also be caused by a delay/caching on google drive's end when
comparing directory listings. Specifically with team drives used in
combination with --fast-list. Files that were uploaded recently may not
appear on the directory list sent to rclone when using --fast-list.

Waiting a moderate period of time between attempts (estimated to be
approximately 1 hour) and/or not using --fast-list both seem to be
effective in preventing the problem.

SHA1 or SHA256 hashes may be missing

All files have MD5 hashes, but a small fraction of files uploaded may
not have SHA1 or SHA256 hashes especially if they were uploaded before
2018.

Making your own client_id

When you use rclone with Google drive in its default configuration you
are using rclone's client_id. This is shared between all the rclone
users. There is a global rate limit on the number of queries per second
that each client_id can do set by Google. rclone already has a high
quota and I will continue to make sure it is high enough by contacting
Google.

It is strongly recommended to use your own client ID as the default
rclone ID is heavily used. If you have multiple services running, it is
recommended to use an API key for each service. The default Google quota
is 10 transactions per second so it is recommended to stay under that
number as if you use more than that, it will cause rclone to rate limit
and make things slower.

Here is how to create your own Google Drive client ID for rclone:

1.  Log into the Google API Console with your Google account. It doesn't
    matter what Google account you use. (It need not be the same account
    as the Google Drive you want to access)

2.  Select a project or create a new project.

3.  Under "ENABLE APIS AND SERVICES" search for "Drive", and enable the
    "Google Drive API".

4.  Click "Credentials" in the left-side panel (not "Create
    credentials", which opens the wizard).

5.  If you already configured an "Oauth Consent Screen", then skip to
    the next step; if not, click on "CONFIGURE CONSENT SCREEN" button
    (near the top right corner of the right panel), then click "Get
    started". On the next screen, enter an "Application name" ("rclone"
    is OK); enter "User Support Email" (your own email is OK); Next,
    under Audience select "External". Next enter your own contact
    information, agree to terms and click "Create". You should now see
    rclone (or your project name) in a box in the top left of the
    screen.

    (PS: if you are a GSuite user, you could also select "Internal"
    instead of "External" above, but this will restrict API use to
    Google Workspace users in your organisation).

    You will also have to add some scopes, including

    -   https://www.googleapis.com/auth/docs
    -   https://www.googleapis.com/auth/drive in order to be able to
        edit, create and delete files with RClone.
    -   https://www.googleapis.com/auth/drive.metadata.readonly which
        you may also want to add.

    To do this, click Data Access on the left side panel, click "add or
    remove scopes" and select the three above and press update or go to
    the "Manually add scopes" text box (scroll down) and enter
    "https://www.googleapis.com/auth/docs,https://www.googleapis.com/auth/drive,https://www.googleapis.com/auth/drive.metadata.readonly",
    press add to table then update.

    You should now see the three scopes on your Data access page. Now
    press save at the bottom!

6.  After adding scopes, click Audience Scroll down and click "+ Add
    users". Add yourself as a test user and press save.

7.  Go to Overview on the left panel, click "Create OAuth client".
    Choose an application type of "Desktop app" and click "Create". (the
    default name is fine)

8.  It will show you a client ID and client secret. Make a note of
    these. (If you selected "External" at Step 5 continue to Step 9. If
    you chose "Internal" you don't need to publish and can skip straight
    to Step 10 but your destination drive must be part of the same
    Google Workspace.)

9.  Go to "Audience" and then click "PUBLISH APP" button and confirm.
    Add yourself as a test user if you haven't already.

10. Provide the noted client ID and client secret to rclone.

11. Run the web-based authorization flow from within rclone config, by
    answering "Y" when it asks "Already have a token - refresh?".

Be aware that, due to the "enhanced security" recently introduced by
Google, you are theoretically expected to "submit your app for
verification" and then wait a few weeks(!) for their response; in
practice, you can go right ahead and use the client ID and client secret
with rclone, the only issue will be a very scary confirmation screen
shown when you connect via your browser for rclone to be able to get its
token-id (but as this only happens during the remote configuration, it's
not such a big deal). Keeping the application in "Testing" will work as
well, but the limitation is that any grants will expire after a week,
which can be annoying to refresh constantly. If, for whatever reason, a
short grant time is not a problem, then keeping the application in
testing mode would also be sufficient.

(Thanks to @balazer on github for these instructions.)

Sometimes, creation of an OAuth consent in Google API Console fails due
to an error message "The request failed because changes to one of the
field of the resource is not supported". As a convenient workaround, the
necessary Google Drive API key can be created on the Python Quickstart
page. Just push the Enable the Drive API button to receive the Client ID
and Secret. Note that it will automatically create a new project in the
API Console.

Google Photos

The rclone backend for Google Photos is a specialized backend for
transferring photos and videos to and from Google Photos.

NB The Google Photos API which rclone uses has quite a few limitations,
so please read the limitations section carefully to make sure it is
suitable for your use.

NB From March 31, 2025 rclone can only download photos it uploaded. This
limitation is due to policy changes at Google. You may need to run
rclone config reconnect remote: to make rclone work again after
upgrading to rclone v1.70.

Configuration

The initial setup for google cloud storage involves getting a token from
Google Photos which you need to do in your browser. rclone config walks
you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Google Photos
       \ "google photos"
    [snip]
    Storage> google photos
    ** See help for google photos backend at: https://rclone.org/googlephotos/ **

    Google Application Client Id
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    client_id> 
    Google Application Client Secret
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    client_secret> 
    Set to make the Google Photos backend read only.

    If you choose read only then rclone will only request read only access
    to your photos, otherwise rclone will request full access.
    Enter a boolean value (true or false). Press Enter for the default ("false").
    read_only> 
    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> n
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code

    *** IMPORTANT: All media items uploaded to Google Photos with rclone
    *** are stored in full resolution at original quality.  These uploads
    *** will count towards storage in your Google Account.

    Configuration complete.
    Options:
    - type: google photos
    - token: {"access_token":"XXX","token_type":"Bearer","refresh_token":"XXX","expiry":"2019-06-28T17:38:04.644930156+01:00"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Google if using web browser to automatically
authenticate. This only runs from the moment it opens your browser to
the moment you get back the verification code. This is on
http://127.0.0.1:53682/ and this may require you to unblock it
temporarily if you are running a host firewall, or use manual mode.

This remote is called remote and can now be used like this

See all the albums in your photos

    rclone lsd remote:album

Make a new album

    rclone mkdir remote:album/newAlbum

List the contents of an album

    rclone ls remote:album/newAlbum

Sync /home/local/images to the Google Photos, removing any excess files
in the album.

    rclone sync --interactive /home/local/image remote:album/newAlbum

Layout

As Google Photos is not a general purpose cloud storage system, the
backend is laid out to help you navigate it.

The directories under media show different ways of categorizing the
media. Each file will appear multiple times. So if you want to make a
backup of your google photos you might choose to backup
remote:media/by-month. (NB remote:media/by-day is rather slow at the
moment so avoid for syncing.)

Note that all your photos and videos will appear somewhere under media,
but they may not appear under album unless you've put them into albums.

    /
    - upload
        - file1.jpg
        - file2.jpg
        - ...
    - media
        - all
            - file1.jpg
            - file2.jpg
            - ...
        - by-year
            - 2000
                - file1.jpg
                - ...
            - 2001
                - file2.jpg
                - ...
            - ...
        - by-month
            - 2000
                - 2000-01
                    - file1.jpg
                    - ...
                - 2000-02
                    - file2.jpg
                    - ...
            - ...
        - by-day
            - 2000
                - 2000-01-01
                    - file1.jpg
                    - ...
                - 2000-01-02
                    - file2.jpg
                    - ...
            - ...
    - album
        - album name
        - album name/sub
    - shared-album
        - album name
        - album name/sub
    - feature
        - favorites
            - file1.jpg
            - file2.jpg

There are two writable parts of the tree, the upload directory and sub
directories of the album directory.

The upload directory is for uploading files you don't want to put into
albums. This will be empty to start with and will contain the files
you've uploaded for one rclone session only, becoming empty again when
you restart rclone. The use case for this would be if you have a load of
files you just want to once off dump into Google Photos. For repeated
syncing, uploading to album will work better.

Directories within the album directory are also writeable and you may
create new directories (albums) under album. If you copy files with a
directory hierarchy in there then rclone will create albums with the /
character in them. For example if you do

    rclone copy /path/to/images remote:album/images

and the images directory contains

    images
        - file1.jpg
        dir
            file2.jpg
        dir2
            dir3
                file3.jpg

Then rclone will create the following albums with the following files in

-   images
    -   file1.jpg
-   images/dir
    -   file2.jpg
-   images/dir2/dir3
    -   file3.jpg

This means that you can use the album path pretty much like a normal
filesystem and it is a good target for repeated syncing.

The shared-album directory shows albums shared with you or by you. This
is similar to the Sharing tab in the Google Photos web interface.

Standard options

Here are the Standard options specific to google photos (Google Photos).

--gphotos-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_GPHOTOS_CLIENT_ID
-   Type: string
-   Required: false

--gphotos-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_GPHOTOS_CLIENT_SECRET
-   Type: string
-   Required: false

--gphotos-read-only

Set to make the Google Photos backend read only.

If you choose read only then rclone will only request read only access
to your photos, otherwise rclone will request full access.

Properties:

-   Config: read_only
-   Env Var: RCLONE_GPHOTOS_READ_ONLY
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to google photos (Google Photos).

--gphotos-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_GPHOTOS_TOKEN
-   Type: string
-   Required: false

--gphotos-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_GPHOTOS_AUTH_URL
-   Type: string
-   Required: false

--gphotos-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_GPHOTOS_TOKEN_URL
-   Type: string
-   Required: false

--gphotos-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_GPHOTOS_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--gphotos-read-size

Set to read the size of media items.

Normally rclone does not read the size of media items since this takes
another transaction. This isn't necessary for syncing. However rclone
mount needs to know the size of files in advance of reading them, so
setting this flag when using rclone mount is recommended if you want to
read the media.

Properties:

-   Config: read_size
-   Env Var: RCLONE_GPHOTOS_READ_SIZE
-   Type: bool
-   Default: false

--gphotos-start-year

Year limits the photos to be downloaded to those which are uploaded
after the given year.

Properties:

-   Config: start_year
-   Env Var: RCLONE_GPHOTOS_START_YEAR
-   Type: int
-   Default: 2000

--gphotos-include-archived

Also view and download archived media.

By default, rclone does not request archived media. Thus, when syncing,
archived media is not visible in directory listings or transferred.

Note that media in albums is always visible and synced, no matter their
archive status.

With this flag, archived media are always visible in directory listings
and transferred.

Without this flag, archived media will not be visible in directory
listings and won't be transferred.

Properties:

-   Config: include_archived
-   Env Var: RCLONE_GPHOTOS_INCLUDE_ARCHIVED
-   Type: bool
-   Default: false

--gphotos-proxy

Use the gphotosdl proxy for downloading the full resolution images

The Google API will deliver images and video which aren't full
resolution, and/or have EXIF data missing.

However if you use the gphotosdl proxy then you can download original,
unchanged images.

This runs a headless browser in the background.

Download the software from gphotosdl

First run with

    gphotosdl -login

Then once you have logged into google photos close the browser window
and run

    gphotosdl

Then supply the parameter --gphotos-proxy "http://localhost:8282" to
make rclone use the proxy.

Properties:

-   Config: proxy
-   Env Var: RCLONE_GPHOTOS_PROXY
-   Type: string
-   Required: false

--gphotos-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_GPHOTOS_ENCODING
-   Type: Encoding
-   Default: Slash,CrLf,InvalidUtf8,Dot

--gphotos-batch-mode

Upload file batching sync|async|off.

This sets the batch mode used by rclone.

This has 3 possible values

-   off - no batching
-   sync - batch uploads and check completion (default)
-   async - batch upload and don't check completion

Rclone will close any outstanding batches when it exits which may make a
delay on quit.

Properties:

-   Config: batch_mode
-   Env Var: RCLONE_GPHOTOS_BATCH_MODE
-   Type: string
-   Default: "sync"

--gphotos-batch-size

Max number of files in upload batch.

This sets the batch size of files to upload. It has to be less than 50.

By default this is 0 which means rclone will calculate the batch size
depending on the setting of batch_mode.

-   batch_mode: async - default batch_size is 50
-   batch_mode: sync - default batch_size is the same as --transfers
-   batch_mode: off - not in use

Rclone will close any outstanding batches when it exits which may make a
delay on quit.

Setting this is a great idea if you are uploading lots of small files as
it will make them a lot quicker. You can use --transfers 32 to maximise
throughput.

Properties:

-   Config: batch_size
-   Env Var: RCLONE_GPHOTOS_BATCH_SIZE
-   Type: int
-   Default: 0

--gphotos-batch-timeout

Max time to allow an idle upload batch before uploading.

If an upload batch is idle for more than this long then it will be
uploaded.

The default for this is 0 which means rclone will choose a sensible
default based on the batch_mode in use.

-   batch_mode: async - default batch_timeout is 10s
-   batch_mode: sync - default batch_timeout is 1s
-   batch_mode: off - not in use

Properties:

-   Config: batch_timeout
-   Env Var: RCLONE_GPHOTOS_BATCH_TIMEOUT
-   Type: Duration
-   Default: 0s

--gphotos-batch-commit-timeout

Max time to wait for a batch to finish committing. (no longer used)

Properties:

-   Config: batch_commit_timeout
-   Env Var: RCLONE_GPHOTOS_BATCH_COMMIT_TIMEOUT
-   Type: Duration
-   Default: 10m0s

--gphotos-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_GPHOTOS_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Only images and videos can be uploaded. If you attempt to upload non
videos or images or formats that Google Photos doesn't understand,
rclone will upload the file, then Google Photos will give an error when
it is put turned into a media item.

NB From March 31, 2025 rclone can only download photos it uploaded. This
limitation is due to policy changes at Google. You may need to run
rclone config reconnect remote: to make rclone work again after
upgrading to rclone v1.70.

Note that all media items uploaded to Google Photos through the API are
stored in full resolution at "original quality" and will count towards
your storage quota in your Google Account. The API does not offer a way
to upload in "high quality" mode..

rclone about is not supported by the Google Photos backend. Backends
without this capability cannot determine free space for an rclone mount
or use policy mfs (most free space) as a member of an rclone union
remote.

See List of backends that do not support rclone about See rclone about

Downloading Images

When Images are downloaded this strips EXIF location (according to the
docs and my tests). This is a limitation of the Google Photos API and is
covered by bug #112096115.

The current google API does not allow photos to be downloaded at
original resolution. This is very important if you are, for example,
relying on "Google Photos" as a backup of your photos. You will not be
able to use rclone to redownload original images. You could use 'google
takeout' to recover the original photos as a last resort

NB you can use the --gphotos-proxy flag to use a headless browser to
download images in full resolution.

Downloading Videos

When videos are downloaded they are downloaded in a really compressed
version of the video compared to downloading it via the Google Photos
web interface. This is covered by bug #113672044.

NB you can use the --gphotos-proxy flag to use a headless browser to
download images in full resolution.

Duplicates

If a file name is duplicated in a directory then rclone will add the
file ID into its name. So two files called file.jpg would then appear as
file {123456}.jpg and file {ABCDEF}.jpg (the actual IDs are a lot longer
alas!).

If you upload the same image (with the same binary data) twice then
Google Photos will deduplicate it. However it will retain the filename
from the first upload which may confuse rclone. For example if you
uploaded an image to upload then uploaded the same image to
album/my_album the filename of the image in album/my_album will be what
it was uploaded with initially, not what you uploaded it with to album.
In practise this shouldn't cause too many problems.

Modification times

The date shown of media in Google Photos is the creation date as
determined by the EXIF information, or the upload date if that is not
known.

This is not changeable by rclone and is not the modification date of the
media on local disk. This means that rclone cannot use the dates from
Google Photos for syncing purposes.

Size

The Google Photos API does not return the size of media. This means that
when syncing to Google Photos, rclone can only do a file existence
check.

It is possible to read the size of the media, but this needs an extra
HTTP HEAD request per media item so is very slow and uses up a lot of
transactions. This can be enabled with the --gphotos-read-size option or
the read_size = true config parameter.

If you want to use the backend with rclone mount you may need to enable
this flag (depending on your OS and application using the photos)
otherwise you may not be able to read media off the mount. You'll need
to experiment to see if it works for you without the flag.

Albums

Rclone can only upload files to albums it created. This is a limitation
of the Google Photos API.

Rclone can remove files it uploaded from albums it created only.

Deleting files

Rclone can remove files from albums it created, but note that the Google
Photos API does not allow media to be deleted permanently so this media
will still remain. See bug #109759781.

Rclone cannot delete files anywhere except under album.

Deleting albums

The Google Photos API does not support deleting albums - see bug
#135714733.

Making your own client_id

When you use rclone with Google photos in its default configuration you
are using rclone's client_id. This is shared between all the rclone
users. There is a global rate limit on the number of queries per second
that each client_id can do set by Google.

If there is a problem with this client_id (eg quota too low or the
client_id stops working) then you can make your own.

Please follow the steps in the google drive docs with the following
differences:

-   At step 3, instead of enabling the "Google Drive API", search for
    and enable the "Photos Library API".

-   At step 5, you will need to add different scopes. Use these scopes
    instead of the drive ones:

    https://www.googleapis.com/auth/photoslibrary.appendonly
    https://www.googleapis.com/auth/photoslibrary.readonly.appcreateddata
    https://www.googleapis.com/auth/photoslibrary.edit.appcreateddata

Hasher

Hasher is a special overlay backend to create remotes which handle
checksums for other remotes. It's main functions include:

-   Emulate hash types unimplemented by backends
-   Cache checksums to help with slow hashing of large local or (S)FTP
    files
-   Warm up checksum cache from external SUM files

Getting started

To use Hasher, first set up the underlying remote following the
configuration instructions for that remote. You can also use a local
pathname instead of a remote. Check that your base remote is working.

Let's call the base remote myRemote:path here. Note that anything inside
myRemote:path will be handled by hasher and anything outside won't. This
means that if you are using a bucket based remote (S3, B2, Swift) then
you should put the bucket in the remote s3:bucket.

Now proceed to interactive or manual configuration.

Interactive configuration

Run rclone config:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> Hasher1
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Handle checksums for other remotes
       \ "hasher"
    [snip]
    Storage> hasher
    Remote to cache checksums for, like myremote:mypath.
    Enter a string value. Press Enter for the default ("").
    remote> myRemote:path
    Comma separated list of supported checksum types.
    Enter a string value. Press Enter for the default ("md5,sha1").
    hashsums> md5
    Maximum time to keep checksums in cache. 0 = no cache, off = cache forever.
    max_age> off
    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> n
    Remote config
    --------------------
    [Hasher1]
    type = hasher
    remote = myRemote:path
    hashsums = md5
    max_age = off
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Manual configuration

Run rclone config path to see the path of current active config file,
usually YOURHOME/.config/rclone/rclone.conf. Open it in your favorite
text editor, find section for the base remote and create new section for
hasher like in the following examples:

    [Hasher1]
    type = hasher
    remote = myRemote:path
    hashes = md5
    max_age = off

    [Hasher2]
    type = hasher
    remote = /local/path
    hashes = dropbox,sha1
    max_age = 24h

Hasher takes basically the following parameters:

-   remote is required
-   hashes is a comma separated list of supported checksums (by default
    md5,sha1)
-   max_age - maximum time to keep a checksum value in the cache 0 will
    disable caching completely off will cache "forever" (that is until
    the files get changed)

Make sure the remote has : (colon) in. If you specify the remote without
a colon then rclone will use a local directory of that name. So if you
use a remote of /local/path then rclone will handle hashes for that
directory. If you use remote = name literally then rclone will put files
in a directory called name located under current directory.

Usage

Basic operations

Now you can use it as Hasher2:subdir/file instead of base remote. Hasher
will transparently update cache with new checksums when a file is fully
read or overwritten, like:

    rclone copy External:path/file Hasher:dest/path
    rclone cat Hasher:path/to/file > /dev/null

The way to refresh all cached checksums (even unsupported by the base
backend) for a subtree is to re-download all files in the subtree. For
example, use hashsum --download using any supported hashsum on the
command line (we just care to re-read):

    rclone hashsum MD5 --download Hasher:path/to/subtree > /dev/null
    rclone backend dump Hasher:path/to/subtree

You can print or drop hashsum cache using custom backend commands:

    rclone backend dump Hasher:dir/subdir
    rclone backend drop Hasher:

Pre-Seed from a SUM File

Hasher supports two backend commands: generic SUM file import and faster
but less consistent stickyimport.

    rclone backend import Hasher:dir/subdir SHA1 /path/to/SHA1SUM [--checkers 4]

Instead of SHA1 it can be any hash supported by the remote. The last
argument can point to either a local or an other-remote:path text file
in SUM format. The command will parse the SUM file, then walk down the
path given by the first argument, snapshot current fingerprints and fill
in the cache entries correspondingly.

-   Paths in the SUM file are treated as relative to hasher:dir/subdir.
-   The command will not check that supplied values are correct. You
    must know what you are doing.
-   This is a one-time action. The SUM file will not get "attached" to
    the remote. Cache entries can still be overwritten later, should the
    object's fingerprint change.
-   The tree walk can take long depending on the tree size. You can
    increase --checkers to make it faster. Or use stickyimport if you
    don't care about fingerprints and consistency.

    rclone backend stickyimport hasher:path/to/data sha1 remote:/path/to/sum.sha1

stickyimport is similar to import but works much faster because it does
not need to stat existing files and skips initial tree walk. Instead of
binding cache entries to file fingerprints it creates sticky entries
bound to the file name alone ignoring size, modification time etc. Such
hash entries can be replaced only by purge, delete, backend drop or by
full re-read/re-write of the files.

Configuration reference

Standard options

Here are the Standard options specific to hasher (Better checksums for
other remotes).

--hasher-remote

Remote to cache checksums for (e.g. myRemote:path).

Properties:

-   Config: remote
-   Env Var: RCLONE_HASHER_REMOTE
-   Type: string
-   Required: true

--hasher-hashes

Comma separated list of supported checksum types.

Properties:

-   Config: hashes
-   Env Var: RCLONE_HASHER_HASHES
-   Type: CommaSepList
-   Default: md5,sha1

--hasher-max-age

Maximum time to keep checksums in cache (0 = no cache, off = cache
forever).

Properties:

-   Config: max_age
-   Env Var: RCLONE_HASHER_MAX_AGE
-   Type: Duration
-   Default: off

Advanced options

Here are the Advanced options specific to hasher (Better checksums for
other remotes).

--hasher-auto-size

Auto-update checksum for files smaller than this size (disabled by
default).

Properties:

-   Config: auto_size
-   Env Var: RCLONE_HASHER_AUTO_SIZE
-   Type: SizeSuffix
-   Default: 0

--hasher-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_HASHER_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Any metadata supported by the underlying remote is read and written.

See the metadata docs for more info.

Backend commands

Here are the commands specific to the hasher backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

drop

Drop cache.

    rclone backend drop remote: [options] [<arguments>+]

Completely drop checksum cache.

Usage example:

    rclone backend drop hasher:

dump

Dump the database.

    rclone backend dump remote: [options] [<arguments>+]

Dump cache records covered by the current remote.

fulldump

Full dump of the database.

    rclone backend fulldump remote: [options] [<arguments>+]

Dump all cache records in the database.

import

Import a SUM file.

    rclone backend import remote: [options] [<arguments>+]

Amend hash cache from a SUM file and bind checksums to files by
size/time.

Usage example:

    rclone backend import hasher:subdir md5 /path/to/sum.md5

stickyimport

Perform fast import of a SUM file.

    rclone backend stickyimport remote: [options] [<arguments>+]

Fill hash cache from a SUM file without verifying file fingerprints.

Usage example:

    rclone backend stickyimport hasher:subdir md5 remote:path/to/sum.md5

Implementation details (advanced)

This section explains how various rclone operations work on a hasher
remote.

Disclaimer. This section describes current implementation which can
change in future rclone versions!.

Hashsum command

The rclone hashsum (or md5sum or sha1sum) command will:

1.  if requested hash is supported by lower level, just pass it.
2.  if object size is below auto_size then download object and calculate
    requested hashes on the fly.
3.  if unsupported and the size is big enough, build object fingerprint
    (including size, modtime if supported, first-found other hash if
    any).
4.  if the strict match is found in cache for the requested remote,
    return the stored hash.
5.  if remote found but fingerprint mismatched, then purge the entry and
    proceed to step 6.
6.  if remote not found or had no requested hash type or after step 5:
    download object, calculate all supported hashes on the fly and store
    in cache; return requested hash.

Other operations

-   any time a hash is requested, follow the logic from 1-4 from hashsum
    above
-   whenever a file is uploaded or downloaded in full, capture the
    stream to calculate all supported hashes on the fly and update
    database
-   server-side move will update keys of existing cache entries
-   deletefile will remove a single cache entry
-   purge will remove all cache entries under the purged path

Note that setting max_age = 0 will disable checksum caching completely.

If you set max_age = off, checksums in cache will never age, unless you
fully rewrite or delete the file.

Cache storage

Cached checksums are stored as bolt database files under rclone cache
directory, usually ~/.cache/rclone/kv/. Databases are maintained one per
base backend, named like BaseRemote~hasher.bolt. Checksums for multiple
alias-es into a single base backend will be stored in the single
database. All local paths are treated as aliases into the local backend
(unless encrypted or chunked) and stored in
~/.cache/rclone/kv/local~hasher.bolt. Databases can be shared between
multiple rclone processes.

Huawei Drive

Paths are specified as huaweidrive:path

Huawei Drive paths may be as deep as required, e.g.
huaweidrive:directory/subdirectory.

Configuration

The initial setup for Huawei Drive involves getting a token from Huawei
Drive which you need to do in your browser. rclone config walks you
through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    n/r/c/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Huawei Drive
       \ "huaweidrive"
    [snip]
    Storage> huaweidrive
    OAuth Client Id - leave blank to use rclone's default.
    client_id> 
    OAuth Client Secret - leave blank to use rclone's default.
    client_secret>
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: huaweidrive
    - client_id: 
    - client_secret: 
    - token: {"access_token":"XXX","token_type":"Bearer","refresh_token":"XXX","expiry":"2024-03-16T13:57:58.955387075Z"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Huawei if using web browser to automatically
authenticate. This only runs from the moment it opens your browser to
the moment you get back the verification code. This is on
http://127.0.0.1:53682/ and it may require you to unblock it temporarily
if you are running a host firewall, or use manual mode.

You can then use it like this,

List directories in top level of your drive

    rclone lsd remote:

List all the files in your drive

    rclone ls remote:

To copy a local directory to a drive directory called backup

    rclone copy /home/source remote:backup

Getting your own Client ID and Secret

When you use rclone with Huawei Drive in its default configuration you
are using rclone's client_id. This is shared between all the rclone
users. There is a global rate limit on the number of queries per second
that each client_id can do set by Huawei.

It is strongly recommended to use your own client ID as the default
rclone ID is heavily used. If you have multiple services running, it is
recommended to use a separate client ID for each service to avoid rate
limiting issues.

Here is how to create your own Huawei Drive client ID for rclone:

Follow the detailed guides for complete setup instructions:

-   Huawei HMS Core Web App Preparations
-   Huawei HMS Core Server Preparations

Rclone uses the web application access method to connect to Huawei
Drive. Before starting, you need to implement quick login authorization
through Huawei Account Open Service. With user authorization
credentials, rclone can call Huawei Cloud Drive Service APIs.

Create Server Application

Before accessing Drive service, developers need to create a server
application first. For details, please refer to the WEB Application
Access Development Preparation section in the "Huawei Account Service
Development Guide".

Enable Drive Application Switch

1.  Log in to the AppGallery Connect website and click "My Projects".
2.  Find your project in the project list, select the application that
    needs to access Drive in the project, and click "API Management".
3.  In the "API Management" area of the "Project Settings" page, click
    the switch on the right side of Drive Kit to ensure the switch is in
    the open state.

Sign Huawei Cloud Drive Privacy Notice and User Agreement

Guide users to visit https://cloud.huawei.com/. First-time users need to
sign the agreement before they can use Huawei Cloud Drive Service.

Application Access to Obtain Authentication Credential Access Token

Applications accessing Drive should use authentication credential Access
Token. For specific acquisition methods, please refer to the WEB
Application Access Development Guide section in the "Huawei Account
Service Development Guide".

Key steps summary:

1.  Log into the Huawei Developer Console with your Huawei account.

2.  Create a new project or select an existing project.

3.  Go to "Manage APIs" and enable the "Drive Kit" API.

4.  Click on "Credentials" in the left side panel.

5.  Click "Create Credentials" and choose "OAuth client ID".

6.  Choose "Web application" as the application type.

7.  Add http://localhost:53682/ to the "Authorized redirect URIs".

8.  Click "Create" and note down the Client ID and Client Secret.

9.  Provide the noted client ID and client secret to rclone during
    configuration.

Scopes

Rclone uses the following OAuth2 scopes when accessing Huawei Drive:

-   https://www.huawei.com/auth/drive - Full access to Huawei Drive
    files (excluding application data folder)
-   https://www.huawei.com/auth/drive.file - Access to files created by
    the application
-   openid - OpenID Connect authentication
-   profile - Access to basic profile information

The drive.file scope is included in the default set used by rclone.

Alternative scopes available (not used by rclone by default):

-   https://www.huawei.com/auth/drive.appdata - Access to application
    data folder
-   https://www.huawei.com/auth/drive.readonly - Read-only access to
    file metadata and content
-   https://www.huawei.com/auth/drive.metadata - Read/write access to
    file metadata only
-   https://www.huawei.com/auth/drive.metadata.readonly - Read-only
    access to file metadata only

The default scopes provide read/write access to all files in your Huawei
Drive.

Modification times and hashes

Huawei Drive does not support setting modification times. The API always
uses server-side timestamps, so file modification times from the source
are not preserved during upload. Modification times are available as
read-only metadata (mtime, btime).

Hash algorithm SHA256 is supported for file integrity verification.

Restricted filename characters

Huawei Drive has strict restrictions on file and directory names:

-   Cannot contain: < > | : " * ? / \ or emoji characters
-   Cannot be exactly . ..
-   Maximum length: 250 bytes
-   Single quotes must be escaped with \' in API calls

These restrictions are handled by rclone's encoding:

-   Backslashes \ are encoded
-   Invalid UTF-8 sequences are encoded
-   Right-side spaces are encoded

Invalid characters will be replaced according to the encoding settings.

Resumable uploads

Huawei Drive supports resumable uploads for files larger than the upload
cutoff (default 20MB). Files are uploaded in chunks which allows for
recovery from network interruptions.

File size limits

The maximum file size for Huawei Drive is 50 GiB.

Quota information

To view your current quota you can use the rclone about remote: command
which will display your usage and quota information.

Standard options

Here are the Standard options specific to huaweidrive (Huawei Drive).

--huaweidrive-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_HUAWEIDRIVE_CLIENT_ID
-   Type: string
-   Required: false

--huaweidrive-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_HUAWEIDRIVE_CLIENT_SECRET
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to huaweidrive (Huawei Drive).

--huaweidrive-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_HUAWEIDRIVE_TOKEN
-   Type: string
-   Required: false

--huaweidrive-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_HUAWEIDRIVE_AUTH_URL
-   Type: string
-   Required: false

--huaweidrive-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_HUAWEIDRIVE_TOKEN_URL
-   Type: string
-   Required: false

--huaweidrive-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_HUAWEIDRIVE_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--huaweidrive-root-folder-id

ID of the root folder.

Normally this is auto-detected, but if it fails or you want to speed up
startup, you can set it manually.

Leave blank normally.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_HUAWEIDRIVE_ROOT_FOLDER_ID
-   Type: string
-   Required: false

--huaweidrive-chunk-size

Upload chunk size.

Must be a power of 2 >= 256k and <= 64MB.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_HUAWEIDRIVE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 8Mi

--huaweidrive-list-chunk

Size of listing chunk 1-1000.

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_HUAWEIDRIVE_LIST_CHUNK
-   Type: int
-   Default: 1000

--huaweidrive-upload-cutoff

Cutoff for switching to resumable upload.

Any files larger than this will be uploaded using resumable upload. The
minimum is 0 and the maximum is 20 MiB (Huawei Drive API limit for
single request uploads).

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_HUAWEIDRIVE_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 20Mi

--huaweidrive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_HUAWEIDRIVE_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,LeftSpace,LeftPeriod,LeftTilde,RightSpace,RightPeriod,InvalidUtf8,Dot

--huaweidrive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_HUAWEIDRIVE_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Huawei Drive supports reading and writing custom metadata.

User metadata can be set using the "properties" field in the API. System
metadata includes standard file information such as: - content-type:
MIME type of the object - description: User-provided description -
favorite: Whether file is marked as favorite - btime/mtime/utime:
Various timestamps - sha256: File hash - recycled/has-thumbnail: File
status flags

Custom metadata keys can be any string and will be stored in the file's
properties.

Here are the possible system metadata items for the huaweidrive backend.

  --------------------------------------------------------------------------------
  Name            Help           Type        Example          Read Only
  --------------- -------------- ----------- ---------------- --------------------
  btime           Time when the  RFC 3339                     Y
                  file was                                    
                  created (RFC                                
                  3339)                                       

  content-type    MIME type of   string                       Y
                  the object                                  

  description     Description of string                       N
                  the file                                    

  favorite        Whether the    string                       N
                  file is marked                              
                  as favorite                                 
                  (true/false)                                

  has-thumbnail   Whether the    string                       Y
                  file has a                                  
                  thumbnail                                   
                  (true/false)                                

  mtime           Time when the  RFC 3339                     Y
                  file content                                
                  was last                                    
                  modified (RFC                               
                  3339)                                       

  recycled        Whether the    string                       Y
                  file is in                                  
                  recycle bin                                 
                  (true/false)                                

  sha256          SHA256 hash of string                       Y
                  the file                                    

  utime           Time when the  RFC 3339                     Y
                  file was last                               
                  edited by the                               
                  current user                                
                  (RFC 3339)                                  
  --------------------------------------------------------------------------------

See the metadata docs for more info.

Limitations

Huawei Drive has some rate limiting which may cause rclone to slow down
transfers to avoid hitting the limits.

File name restrictions

-   File names cannot contain: < > | : " * ? / \
-   File names cannot be exactly . ..
-   Maximum file name length is 250 bytes
-   Some unicode characters including emojis are not supported

API rate limits

Huawei Drive imposes API rate limits. Rclone automatically handles these
by backing off when limits are hit.

OAuth2 token expiry

-   Access tokens expire after 1 hour
-   Refresh tokens expire after 180 days
-   Rclone will automatically refresh tokens as needed

File size limits

-   Maximum file size is 50 GiB
-   Files larger than this cannot be uploaded

Upload behavior

-   Files smaller than upload_cutoff (default 20MB) are uploaded in a
    single request using content or multipart method
-   Larger files are uploaded using resumable uploads with configurable
    chunk size
-   Maximum single chunk size for resumable uploads is 64MB
-   Resumable uploads support automatic retry on network errors
-   SHA256 hash verification is supported for uploaded files

Server-side operations

-   Server-side copy: Files can be copied within Huawei Drive without
    downloading and re-uploading
-   Server-side move: Files and directories can be moved/renamed on the
    server side
-   Directory move: Entire directories can be moved with a single API
    call

Directory operations

-   Huawei Drive supports creating empty directories
-   Recursive listing is supported via --fast-list for efficient
    directory traversal
-   Huawei Drive has a special "applicationData" folder for app-specific
    data (not accessible via rclone's default configuration)

Error handling

Common errors and their meanings:

-   401 Unauthorized: Invalid credentials or expired token
-   403 Forbidden: Usually indicates insufficient permissions or API
    quota exceeded
-   404 Not Found: File or directory does not exist
-   409 Conflict: Directory already exists
-   429 Too Many Requests: API rate limit exceeded, rclone will
    automatically retry

Performance tuning

For better performance:

-   Increase --transfers for concurrent operations (default is 4)
-   Adjust chunk_size based on your network speed and file sizes
-   Use --fast-list for operations on directories with many files to
    reduce API calls

Making backups

Huawei Drive is suitable for backups with some considerations:

-   Use rclone sync rather than rclone copy to maintain exact directory
    structure
-   Consider using --backup-dir to preserve deleted files
-   Verify transfers with --checksum flag for critical data
-   Be aware of the 50 GiB file size limit for individual files

Supported features

Huawei Drive supports the following rclone features:

-   Copy - Server-side copy of files
-   Move - Server-side move/rename of files
-   DirMove - Server-side move of directories
-   ListR - Recursive listing for --fast-list
-   About - Storage quota information
-   Purge - Delete directory and all contents
-   CleanUp - Empty the trash
-   UserInfo - Get user account information
-   Metadata - Read and write file metadata/properties
-   ChangeNotify - Poll for remote changes (used by rclone mount and
    rclone rc vfs/poll-interval)

Integration with other services

Huawei Drive can be used as a backend for various rclone operations:

-   Mount as a local filesystem using rclone mount
-   Serve over HTTP using rclone serve http
-   Serve over FTP using rclone serve ftp
-   Serve over WebDAV using rclone serve webdav

Note that some operations may be slower than local storage due to API
limitations and network latency.

HDFS

HDFS is a distributed file-system, part of the Apache Hadoop framework.

Paths are specified as remote: or remote:path/to/dir.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [skip]
    XX / Hadoop distributed file system
       \ "hdfs"
    [skip]
    Storage> hdfs
    ** See help for hdfs backend at: https://rclone.org/hdfs/ **

    hadoop name node and port
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to host namenode at port 8020
       \ "namenode:8020"
    namenode> namenode.hadoop:8020
    hadoop user name
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to hdfs as root
       \ "root"
    username> root
    Edit advanced config? (y/n)
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    Configuration complete.
    Options:
    - type: hdfs
    - namenode: namenode.hadoop:8020
    - username: root
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:

    Name                 Type
    ====                 ====
    hadoop               hdfs

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q

This remote is called remote and can now be used like this

See all the top level directories

    rclone lsd remote:

List the contents of a directory

    rclone ls remote:directory

Sync the remote directory to /home/local/directory, deleting any excess
files.

    rclone sync --interactive remote:directory /home/local/directory

Setting up your own HDFS instance for testing

You may start with a manual setup or use the docker image from the
tests:

If you want to build the docker image

    git clone https://github.com/rclone/rclone.git
    cd rclone/fstest/testserver/images/test-hdfs
    docker build --rm -t rclone/test-hdfs .

Or you can just use the latest one pushed

    docker run --rm --name "rclone-hdfs" -p 127.0.0.1:9866:9866 -p 127.0.0.1:8020:8020 --hostname "rclone-hdfs" rclone/test-hdfs

NB it need few seconds to startup.

For this docker image the remote needs to be configured like this:

    [remote]
    type = hdfs
    namenode = 127.0.0.1:8020
    username = root

You can stop this image with docker kill rclone-hdfs (NB it does not use
volumes, so all data uploaded will be lost.)

Modification times

Time accurate to 1 second is stored.

Checksum

No checksums are implemented.

Usage information

You can use the rclone about remote: command which will display
filesystem size and current usage.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  :            0x3A        ：

Invalid UTF-8 bytes will also be replaced.

Standard options

Here are the Standard options specific to hdfs (Hadoop distributed file
system).

--hdfs-namenode

Hadoop name nodes and ports.

E.g. "namenode-1:8020,namenode-2:8020,..." to connect to host namenodes
at port 8020.

Properties:

-   Config: namenode
-   Env Var: RCLONE_HDFS_NAMENODE
-   Type: CommaSepList
-   Default:

--hdfs-username

Hadoop user name.

Properties:

-   Config: username
-   Env Var: RCLONE_HDFS_USERNAME
-   Type: string
-   Required: false
-   Examples:
    -   "root"
        -   Connect to hdfs as root.

Advanced options

Here are the Advanced options specific to hdfs (Hadoop distributed file
system).

--hdfs-service-principal-name

Kerberos service principal name for the namenode.

Enables KERBEROS authentication. Specifies the Service Principal Name
(SERVICE/FQDN) for the namenode. E.g. "hdfs/namenode.hadoop.docker" for
namenode running as service 'hdfs' with FQDN 'namenode.hadoop.docker'.

Properties:

-   Config: service_principal_name
-   Env Var: RCLONE_HDFS_SERVICE_PRINCIPAL_NAME
-   Type: string
-   Required: false

--hdfs-data-transfer-protection

Kerberos data transfer protection: authentication|integrity|privacy.

Specifies whether or not authentication, data signature integrity
checks, and wire encryption are required when communicating with the
datanodes. Possible values are 'authentication', 'integrity' and
'privacy'. Used only with KERBEROS enabled.

Properties:

-   Config: data_transfer_protection
-   Env Var: RCLONE_HDFS_DATA_TRANSFER_PROTECTION
-   Type: string
-   Required: false
-   Examples:
    -   "privacy"
        -   Ensure authentication, integrity and encryption enabled.

--hdfs-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_HDFS_ENCODING
-   Type: Encoding
-   Default: Slash,Colon,Del,Ctl,InvalidUtf8,Dot

--hdfs-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_HDFS_DESCRIPTION
-   Type: string
-   Required: false

Limitations

-   Erasure coding not supported, see issue #8808
-   No server-side Move or DirMove.
-   Checksums not implemented.

HiDrive

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

The initial setup for hidrive involves getting a token from HiDrive
which you need to do in your browser. rclone config walks you through
it.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found - make a new one
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / HiDrive
       \ "hidrive"
    [snip]
    Storage> hidrive
    OAuth Client Id - Leave blank normally.
    client_id>
    OAuth Client Secret - Leave blank normally.
    client_secret>
    Access permissions that rclone should use when requesting access from HiDrive.
    Leave blank normally.
    scope_access>
    Edit advanced config?
    y/n> n
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth?state=xxxxxxxxxxxxxxxxxxxxxx
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: hidrive
    - token: {"access_token":"xxxxxxxxxxxxxxxxxxxx","token_type":"Bearer","refresh_token":"xxxxxxxxxxxxxxxxxxxxxxx","expiry":"xxxxxxxxxxxxxxxxxxxxxxx"}
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

You should be aware that OAuth-tokens can be used to access your account
and hence should not be shared with other persons. See the below section
for more information.

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from HiDrive. This only runs from the moment it opens
your browser to the moment you get back the verification code. The
webserver runs on http://127.0.0.1:53682/. If local port 53682 is
protected by a firewall you may need to temporarily unblock the firewall
to complete authorization.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your HiDrive root folder

    rclone lsd remote:

List all the files in your HiDrive filesystem

    rclone ls remote:

To copy a local directory to a HiDrive directory called backup

    rclone copy /home/source remote:backup

Keeping your tokens safe

Any OAuth-tokens will be stored by rclone in the remote's configuration
file as unencrypted text. Anyone can use a valid refresh-token to access
your HiDrive filesystem without knowing your password. Therefore you
should make sure no one else can access your configuration.

It is possible to encrypt rclone's configuration file. You can find
information on securing your configuration file by viewing the
configuration encryption docs.

Invalid refresh token

As can be verified on HiDrive's OAuth guide, each refresh_token (for
Native Applications) is valid for 60 days. If used to access HiDrivei,
its validity will be automatically extended.

This means that if you

-   Don't use the HiDrive remote for 60 days

then rclone will return an error which includes a text that implies the
refresh token is invalid or expired.

To fix this you will need to authorize rclone to access your HiDrive
account again.

Using

    rclone config reconnect remote:

the process is very similar to the process of initial setup exemplified
before.

Modification times and hashes

HiDrive allows modification times to be set on objects accurate to 1
second.

HiDrive supports its own hash type which is used to verify the integrity
of file contents after successful transfers.

Restricted filename characters

HiDrive cannot store files or folders that include / (0x2F) or
null-bytes (0x00) in their name. Any other characters can be used in the
names of files or folders. Additionally, files or folders cannot be
named either of the following: . or ..

Therefore rclone will automatically replace these characters, if files
or folders are stored or accessed with such names.

You can read about how this filename encoding works in general in the
main docs.

Keep in mind that HiDrive only supports file or folder names with a
length of 255 characters or less.

Transfers

HiDrive limits file sizes per single request to a maximum of 2 GiB. To
allow storage of larger files and allow for better upload performance,
the hidrive backend will use a chunked transfer for files larger than 96
MiB. Rclone will upload multiple parts/chunks of the file at the same
time. Chunks in the process of being uploaded are buffered in memory, so
you may want to restrict this behaviour on systems with limited
resources.

You can customize this behaviour using the following options:

-   chunk_size: size of file parts
-   upload_cutoff: files larger or equal to this in size will use a
    chunked transfer
-   upload_concurrency: number of file-parts to upload at the same time

See the below section about configuration options for more details.

Root folder

You can set the root folder for rclone. This is the directory that
rclone considers to be the root of your HiDrive.

Usually, you will leave this blank, and rclone will use the root of the
account.

However, you can set this to restrict rclone to a specific folder
hierarchy.

This works by prepending the contents of the root_prefix option to any
paths accessed by rclone. For example, the following two ways to access
the home directory are equivalent:

    rclone lsd --hidrive-root-prefix="/users/test/" remote:path
    rclone lsd remote:/users/test/path

See the below section about configuration options for more details.

Directory member count

By default, rclone will know the number of directory members contained
in a directory. For example, rclone lsd uses this information.

The acquisition of this information will result in additional time costs
for HiDrive's API. When dealing with large directory structures, it may
be desirable to circumvent this time cost, especially when this
information is not explicitly needed. For this, the
disable_fetching_member_count option can be used.

See the below section about configuration options for more details.

Standard options

Here are the Standard options specific to hidrive (HiDrive).

--hidrive-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_HIDRIVE_CLIENT_ID
-   Type: string
-   Required: false

--hidrive-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_HIDRIVE_CLIENT_SECRET
-   Type: string
-   Required: false

--hidrive-scope-access

Access permissions that rclone should use when requesting access from
HiDrive.

Properties:

-   Config: scope_access
-   Env Var: RCLONE_HIDRIVE_SCOPE_ACCESS
-   Type: string
-   Default: "rw"
-   Examples:
    -   "rw"
        -   Read and write access to resources.
    -   "ro"
        -   Read-only access to resources.

Advanced options

Here are the Advanced options specific to hidrive (HiDrive).

--hidrive-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_HIDRIVE_TOKEN
-   Type: string
-   Required: false

--hidrive-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_HIDRIVE_AUTH_URL
-   Type: string
-   Required: false

--hidrive-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_HIDRIVE_TOKEN_URL
-   Type: string
-   Required: false

--hidrive-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_HIDRIVE_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--hidrive-scope-role

User-level that rclone should use when requesting access from HiDrive.

Properties:

-   Config: scope_role
-   Env Var: RCLONE_HIDRIVE_SCOPE_ROLE
-   Type: string
-   Default: "user"
-   Examples:
    -   "user"
        -   User-level access to management permissions.
        -   This will be sufficient in most cases.
    -   "admin"
        -   Extensive access to management permissions.
    -   "owner"
        -   Full access to management permissions.

--hidrive-root-prefix

The root/parent folder for all paths.

Fill in to use the specified folder as the parent for all paths given to
the remote. This way rclone can use any folder as its starting point.

Properties:

-   Config: root_prefix
-   Env Var: RCLONE_HIDRIVE_ROOT_PREFIX
-   Type: string
-   Default: "/"
-   Examples:
    -   "/"
        -   The topmost directory accessible by rclone.
        -   This will be equivalent with "root" if rclone uses a regular
            HiDrive user account.
    -   "root"
        -   The topmost directory of the HiDrive user account
    -   ""
        -   This specifies that there is no root-prefix for your paths.
        -   When using this you will always need to specify paths to
            this remote with a valid parent e.g. "remote:/path/to/dir"
            or "remote:root/path/to/dir".

--hidrive-endpoint

Endpoint for the service.

This is the URL that API-calls will be made to.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_HIDRIVE_ENDPOINT
-   Type: string
-   Default: "https://api.hidrive.strato.com/2.1"

--hidrive-disable-fetching-member-count

Do not fetch number of objects in directories unless it is absolutely
necessary.

Requests may be faster if the number of objects in subdirectories is not
fetched.

Properties:

-   Config: disable_fetching_member_count
-   Env Var: RCLONE_HIDRIVE_DISABLE_FETCHING_MEMBER_COUNT
-   Type: bool
-   Default: false

--hidrive-chunk-size

Chunksize for chunked uploads.

Any files larger than the configured cutoff (or files of unknown size)
will be uploaded in chunks of this size.

The upper limit for this is 2147483647 bytes (about 2.000Gi). That is
the maximum amount of bytes a single upload-operation will support.
Setting this above the upper limit or to a negative value will cause
uploads to fail.

Setting this to larger values may increase the upload speed at the cost
of using more memory. It can be set to smaller values smaller to save on
memory.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_HIDRIVE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 48Mi

--hidrive-upload-cutoff

Cutoff/Threshold for chunked uploads.

Any files larger than this will be uploaded in chunks of the configured
chunksize.

The upper limit for this is 2147483647 bytes (about 2.000Gi). That is
the maximum amount of bytes a single upload-operation will support.
Setting this above the upper limit will cause uploads to fail.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_HIDRIVE_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 96Mi

--hidrive-upload-concurrency

Concurrency for chunked uploads.

This is the upper limit for how many transfers for the same file are
running concurrently. Setting this above to a value smaller than 1 will
cause uploads to deadlock.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_HIDRIVE_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 4

--hidrive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_HIDRIVE_ENCODING
-   Type: Encoding
-   Default: Slash,Dot

--hidrive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_HIDRIVE_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Symbolic links

HiDrive is able to store symbolic links (symlinks) by design, for
example, when unpacked from a zip archive.

There exists no direct mechanism to manage native symlinks in remotes.
As such this implementation has chosen to ignore any native symlinks
present in the remote. rclone will not be able to access or show any
symlinks stored in the hidrive-remote. This means symlinks cannot be
individually removed, copied, or moved, except when removing, copying,
or moving the parent folder.

This does not affect the .rclonelink-files that rclone uses to encode
and store symbolic links.

Sparse files

It is possible to store sparse files in HiDrive.

Note that copying a sparse file will expand the holes into null-byte
(0x00) regions that will then consume disk space. Likewise, when
downloading a sparse file, the resulting file will have null-byte
regions in the place of file holes.

HTTP

The HTTP remote is a read only remote for reading files of a webserver.
The webserver should provide file listings which rclone will read and
turn into a remote. This has been tested with common webservers such as
Apache/Nginx/Caddy and will likely work with file listings from most web
servers. (If it doesn't then please file an issue, or send a pull
request!)

Paths are specified as remote: or remote:path.

The remote: represents the configured url, and any path following it
will be resolved relative to this url, according to the URL standard.
This means with remote url https://beta.rclone.org/branch and path fix,
the resolved URL will be https://beta.rclone.org/branch/fix, while with
path /fix the resolved URL will be https://beta.rclone.org/fix as the
absolute path is resolved from the root of the domain.

If the path following the remote: ends with / it will be assumed to
point to a directory. If the path does not end with /, then a HEAD
request is sent and the response used to decide if it it is treated as a
file or a directory (run with -vv to see details). When --http-no-head
is specified, a path without ending / is always assumed to be a file. If
rclone incorrectly assumes the path is a file, the solution is to
specify the path with ending /. When you know the path is a directory,
ending it with / is always better as it avoids the initial HEAD request.

To just download a single file it is easier to use copyurl.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / HTTP
       \ "http"
    [snip]
    Storage> http
    URL of http host to connect to
    Choose a number from below, or type in your own value
     1 / Connect to example.com
       \ "https://example.com"
    url> https://beta.rclone.org
    Remote config
    Configuration complete.
    Options:
    - type: http
    - url: https://beta.rclone.org
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:

    Name                 Type
    ====                 ====
    remote               http

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q

This remote is called remote and can now be used like this

See all the top level directories

    rclone lsd remote:

List the contents of a directory

    rclone ls remote:directory

Sync the remote directory to /home/local/directory, deleting any excess
files.

    rclone sync --interactive remote:directory /home/local/directory

Read only

This remote is read only - you can't upload files to an HTTP server.

Modification times

Most HTTP servers store time accurate to 1 second.

Checksum

No checksums are stored.

Usage without a config file

Since the http remote only has one config parameter it is easy to use
without a config file:

    rclone lsd --http-url https://beta.rclone.org :http:

or:

    rclone lsd :http,url='https://beta.rclone.org':

Standard options

Here are the Standard options specific to http (HTTP).

--http-url

URL of HTTP host to connect to.

E.g. "https://example.com", or "https://user:pass@example.com" to use a
username and password.

Properties:

-   Config: url
-   Env Var: RCLONE_HTTP_URL
-   Type: string
-   Required: true

--http-no-escape

Do not escape URL metacharacters in path names.

Properties:

-   Config: no_escape
-   Env Var: RCLONE_HTTP_NO_ESCAPE
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to http (HTTP).

--http-headers

Set HTTP headers for all transactions.

Use this to set additional HTTP headers for all transactions.

The input format is comma separated list of key,value pairs. Standard
CSV encoding may be used.

For example, to set a Cookie use 'Cookie,name=value', or
'"Cookie","name=value"'.

You can set multiple headers, e.g.
'"Cookie","name=value","Authorization","xxx"'.

Properties:

-   Config: headers
-   Env Var: RCLONE_HTTP_HEADERS
-   Type: CommaSepList
-   Default:

--http-no-slash

Set this if the site doesn't end directories with /.

Use this if your target website does not use / on the end of
directories.

A / on the end of a path is how rclone normally tells the difference
between files and directories. If this flag is set, then rclone will
treat all files with Content-Type: text/html as directories and read
URLs from them rather than downloading them.

Note that this may cause rclone to confuse genuine HTML files with
directories.

Properties:

-   Config: no_slash
-   Env Var: RCLONE_HTTP_NO_SLASH
-   Type: bool
-   Default: false

--http-no-head

Don't use HEAD requests.

HEAD requests are mainly used to find file sizes in dir listing. If your
site is being very slow to load then you can try this option. Normally
rclone does a HEAD request for each potential file in a directory
listing to:

-   find its size
-   check it really exists
-   check to see if it is a directory

If you set this option, rclone will not do the HEAD request. This will
mean that directory listings are much quicker, but rclone won't have the
times or sizes of any files, and some files that don't exist may be in
the listing.

Properties:

-   Config: no_head
-   Env Var: RCLONE_HTTP_NO_HEAD
-   Type: bool
-   Default: false

--http-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_HTTP_DESCRIPTION
-   Type: string
-   Required: false

Metadata

HTTP metadata keys are case insensitive and are always returned in lower
case.

Here are the possible system metadata items for the http backend.

  ------------------------------------------------------------------------------------------------------
  Name                           Help                  Type        Example          Read Only
  ------------------------------ --------------------- ----------- ---------------- --------------------
  cache-control                  Cache-Control header  string      no-cache         N

  content-disposition            Content-Disposition   string      inline           N
                                 header                                             

  content-disposition-filename   Filename retrieved    string      file.txt         N
                                 from                                               
                                 Content-Disposition                                
                                 header                                             

  content-encoding               Content-Encoding      string      gzip             N
                                 header                                             

  content-language               Content-Language      string      en-US            N
                                 header                                             

  content-type                   Content-Type header   string      text/plain       N
  ------------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Backend commands

Here are the commands specific to the http backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

set

Set command for updating the config parameters.

    rclone backend set remote: [options] [<arguments>+]

This set command can be used to update the config parameters for a
running http backend.

Usage examples:

    rclone backend set remote: [-o opt_name=opt_value] [-o opt_name2=opt_value2]
    rclone rc backend/command command=set fs=remote: [-o opt_name=opt_value] [-o opt_name2=opt_value2]
    rclone rc backend/command command=set fs=remote: -o url=https://example.com

The option keys are named as they are in the config file.

This rebuilds the connection to the http backend when it is called with
the new parameters. Only new parameters need be passed as the values
will default to those currently in use.

It doesn't return anything.

Limitations

rclone about is not supported by the HTTP backend. Backends without this
capability cannot determine free space for an rclone mount or use policy
mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

ImageKit

This is a backend for the ImageKit.io storage service.

ImageKit.io provides real-time image and video optimizations,
transformations, and CDN delivery. Over 1,000 businesses and 70,000
developers trust ImageKit with their images and videos on the web.

To use this backend, you need to create an account on ImageKit. Start
with a free plan with generous usage limits. Then, as your requirements
grow, upgrade to a plan that best fits your needs. See the pricing
details.

Configuration

Here is an example of making an imagekit configuration.

Firstly create a ImageKit.io account and choose a plan.

You will need to log in and get the publicKey and privateKey for your
account from the developer section.

Now run

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter the name for the new remote.
    name> imagekit-media-library

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / ImageKit.io
    \ (imagekit)
    [snip]
    Storage> imagekit
      
    Option endpoint.
    You can find your ImageKit.io URL endpoint in your [dashboard](https://imagekit.io/dashboard/developer/api-keys)
    Enter a value.
    endpoint> https://ik.imagekit.io/imagekit_id  

    Option public_key.
    You can find your ImageKit.io public key in your [dashboard](https://imagekit.io/dashboard/developer/api-keys)
    Enter a value.
    public_key> public_****************************

    Option private_key.
    You can find your ImageKit.io private key in your [dashboard](https://imagekit.io/dashboard/developer/api-keys)
    Enter a value.
    private_key> private_****************************

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: imagekit
    - endpoint: https://ik.imagekit.io/imagekit_id
    - public_key: public_****************************
    - private_key: private_****************************

    Keep this "imagekit-media-library" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

List directories in the top level of your Media Library

    rclone lsd imagekit-media-library:

Make a new directory.

    rclone mkdir imagekit-media-library:directory

List the contents of a directory.

    rclone ls imagekit-media-library:directory

Modified time and hashes

ImageKit does not support modification times or hashes yet.

Checksums

No checksums are supported.

Standard options

Here are the Standard options specific to imagekit (ImageKit.io).

--imagekit-endpoint

You can find your ImageKit.io URL endpoint in your dashboard

Properties:

-   Config: endpoint
-   Env Var: RCLONE_IMAGEKIT_ENDPOINT
-   Type: string
-   Required: true

--imagekit-public-key

You can find your ImageKit.io public key in your dashboard

Properties:

-   Config: public_key
-   Env Var: RCLONE_IMAGEKIT_PUBLIC_KEY
-   Type: string
-   Required: true

--imagekit-private-key

You can find your ImageKit.io private key in your dashboard

Properties:

-   Config: private_key
-   Env Var: RCLONE_IMAGEKIT_PRIVATE_KEY
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to imagekit (ImageKit.io).

--imagekit-only-signed

If you have configured Restrict unsigned image URLs in your dashboard
settings, set this to true.

Properties:

-   Config: only_signed
-   Env Var: RCLONE_IMAGEKIT_ONLY_SIGNED
-   Type: bool
-   Default: false

--imagekit-versions

Include old versions in directory listings.

Properties:

-   Config: versions
-   Env Var: RCLONE_IMAGEKIT_VERSIONS
-   Type: bool
-   Default: false

--imagekit-upload-tags

Tags to add to the uploaded files, e.g. "tag1,tag2".

Properties:

-   Config: upload_tags
-   Env Var: RCLONE_IMAGEKIT_UPLOAD_TAGS
-   Type: string
-   Required: false

--imagekit-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_IMAGEKIT_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Dollar,Question,Hash,Percent,BackSlash,Del,Ctl,InvalidUtf8,Dot,SquareBracket

--imagekit-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_IMAGEKIT_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Any metadata supported by the underlying remote is read and written.

Here are the possible system metadata items for the imagekit backend.

  -----------------------------------------------------------------------------------------------------------
  Name                 Help            Type        Example                               Read Only
  -------------------- --------------- ----------- ------------------------------------- --------------------
  aws-tags             AI generated    string      tag1,tag2                             Y
                       tags by AWS                                                       
                       Rekognition                                                       
                       associated with                                                   
                       the image                                                         

  btime                Time of file    RFC 3339    2006-01-02T15:04:05.999999999Z07:00   Y
                       birth                                                             
                       (creation) read                                                   
                       from                                                              
                       Last-Modified                                                     
                       header                                                            

  custom-coordinates   Custom          string      0,0,100,100                           Y
                       coordinates of                                                    
                       the file                                                          

  file-type            Type of the     string      image                                 Y
                       file                                                              

  google-tags          AI generated    string      tag1,tag2                             Y
                       tags by Google                                                    
                       Cloud Vision                                                      
                       associated with                                                   
                       the image                                                         

  has-alpha            Whether the     bool                                              Y
                       image has alpha                                                   
                       channel or not                                                    

  height               Height of the   int                                               Y
                       image or video                                                    
                       in pixels                                                         

  is-private-file      Whether the     bool                                              Y
                       file is private                                                   
                       or not                                                            

  size                 Size of the     int64                                             Y
                       object in bytes                                                   

  tags                 Tags associated string      tag1,tag2                             Y
                       with the file                                                     

  width                Width of the    int                                               Y
                       image or video                                                    
                       in pixels                                                         
  -----------------------------------------------------------------------------------------------------------

See the metadata docs for more info.

iCloud Drive and Photos

Configuration

The initial setup for an iCloud backend involves getting a trust
token/session. This uses your regular Apple ID password plus 2FA, either
from a trusted device prompt or an SMS code sent to a trusted phone
number.

IMPORTANT: App-specific passwords are not accepted. Only use your
regular Apple ID password and 2FA.

This backend serves two Apple services:

-   drive - iCloud Drive (default)
-   photos - iCloud Photos

rclone config walks you through the token creation. The trust token is
valid for 30 days. After which you will have to reauthenticate with
rclone reconnect or rclone config.

Authentication

rclone authenticates with Apple using SRP (Secure Remote Password), the
same protocol used by the iCloud web interface. Your password is never
sent to Apple's servers -- instead, a cryptographic proof is exchanged
that verifies you know the password without revealing it.

The authentication flow is:

1.  rclone initiates a session with Apple's identity service
2.  An SRP key exchange takes place (your password is used locally to
    derive a key)
3.  Apple sends a 2FA prompt to your trusted devices, or lets you
    request an SMS code
4.  After you enter the 2FA code, rclone receives a trust token for
    future sessions

Here is an example of how to make a Photos remote called icloudphotos.
For iCloud Drive, leave service at its default drive value. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> icloudphotos
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / iCloud Drive
       \ (iclouddrive)
    [snip]
    Storage> iclouddrive
    Option service.
    iCloud service to use.
    Choose a number from below, or type in your own value of type string.
    Press Enter for the default (drive).
     1 / iCloud Drive
       \ (drive)
     2 / iCloud Photos
       \ (photos)
    service> 2
    Option apple_id.
    Apple ID.
    Enter a value.
    apple_id> APPLEID  
    Option password.
    Password.
    Choose an alternative below.
    y) Yes, type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    Option config_2fa.
    Two-factor authentication: enter your 2FA code or type 'sms' for a text message
    Enter a value.
    config_2fa> 2FACODE
    Remote config
    --------------------
    [icloudphotos]
    - type: iclouddrive
    - service: photos
    - apple_id: APPLEID
    - password: *** ENCRYPTED ***
    - cookies: ****************************
    - trust_token: ****************************
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

iCloud Photos

The iCloud Drive backend also supports accessing iCloud Photos by
setting the service option to photos:

    rclone lsd iclouddrive: --iclouddrive-service photos

This presents a read-only hierarchy rooted at photo libraries:

-   Level 1: Photo libraries — your personal library (PrimarySync) and
    any Shared Photo Library (SharedSync-XXXX)
-   Level 2+: Albums and folders within a library, nested recursively as
    in Apple Photos
-   Leaf level: Photos/videos within an album, including Live Photo .MOV
    companions

Examples:

    # List libraries
    rclone lsd iclouddrive: --iclouddrive-service photos

    # List albums in your primary library
    rclone lsd iclouddrive:PrimarySync/ --iclouddrive-service photos

    # List photos in an album
    rclone ls iclouddrive:PrimarySync/All\ Photos/ --iclouddrive-service photos

    # Download a photo
    rclone copy iclouddrive:PrimarySync/Favorites/IMG_0001.HEIC /tmp/ --iclouddrive-service photos

You can either:

-   set service = photos in rclone config for a dedicated Photos remote
-   keep service = drive and pass --iclouddrive-service photos when
    needed

Metadata

With --metadata, Photos entries expose these read-only metadata keys:

-   width
-   height
-   added-time
-   favorite
-   hidden

These metadata keys are only available when service = photos.

Caching

iCloud Photos caches album listings to disk for fast subsequent access.
On the first run, listing a large album uses parallel startRank
partitions to fetch pages concurrently. After that, a lightweight change
check (~200ms) determines whether the cache is still valid.

Cache location: ~/.cache/rclone/iclouddrive-photos/<remote>/<zone>/

To clear the cache: delete that directory or run
rclone config reconnect.

FUSE mounts

For mounting iCloud Photos via rclone mount, the following flags are
recommended:

    rclone mount remote: /mnt/photos \
        --iclouddrive-service photos \
        --vfs-refresh \
        --dir-cache-time 1h \
        --vfs-cache-mode full \
        --attr-timeout 1m \
        --read-only

-   --vfs-refresh pre-warms directory caches in the background on mount
    start so that albums are ready when you browse them
-   --dir-cache-time 1h extends the in-memory cache lifetime beyond the
    default 5 minutes (change detection is fast, so this is safe)
-   --vfs-cache-mode full caches downloaded photos and videos to local
    disk for fast repeated access
-   --attr-timeout 1m reduces kernel attribute lookups (safe because the
    backend is read-only)
-   --read-only prevents confusing write errors

The first listing of a very large album (e.g. 75,000 items in "All
Photos") can take several minutes due to API pagination limits. This
happens once — subsequent listings use the disk cache.

Limitations

iCloud Photos is read-only. Upload, delete, rename, and move operations
are not supported.

Advanced Data Protection

Advanced Data Protection is supported.

On iPhone, Settings > Apple Account > iCloud > 'Access iCloud Data on
the Web' must be ON.

If ADP is enabled on your account, rclone requests PCS cookies after
2FA. Apple may require approval on a trusted device before those cookies
are issued.

Troubleshooting

PCS cookie errors with ADP

If you see Missing PCS cookies from the request or a requestPCS: error,
the ADP approval flow did not complete successfully.

Check that 'Access iCloud Data on the Web' is enabled and approve any
prompt on your trusted device.

Then run rclone reconnect remote:.

If the remote still has stale auth state, clear the cookies and
trust_token fields in the config, or delete and recreate the remote.

Standard options

Here are the Standard options specific to iclouddrive (iCloud Drive and
Photos).

--iclouddrive-service

iCloud service to use.

Properties:

-   Config: service
-   Env Var: RCLONE_ICLOUDDRIVE_SERVICE
-   Type: string
-   Default: "drive"
-   Examples:
    -   "drive"
        -   iCloud Drive
    -   "photos"
        -   iCloud Photos

--iclouddrive-apple-id

Apple ID.

Properties:

-   Config: apple_id
-   Env Var: RCLONE_ICLOUDDRIVE_APPLE_ID
-   Type: string
-   Required: true

--iclouddrive-password

Password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_ICLOUDDRIVE_PASSWORD
-   Type: string
-   Required: true

--iclouddrive-trust-token

Trust token for session authentication.

Properties:

-   Config: trust_token
-   Env Var: RCLONE_ICLOUDDRIVE_TRUST_TOKEN
-   Type: string
-   Required: false

--iclouddrive-cookies

Session cookies.

Properties:

-   Config: cookies
-   Env Var: RCLONE_ICLOUDDRIVE_COOKIES
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to iclouddrive (iCloud Drive and
Photos).

--iclouddrive-client-id

Client ID for iCloud API access.

Properties:

-   Config: client_id
-   Env Var: RCLONE_ICLOUDDRIVE_CLIENT_ID
-   Type: string
-   Default:
    "d39ba9916b7251055b22c7f910e2ea796ee65e98b2ddecea8f5dde8d9d1a815d"

--iclouddrive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_ICLOUDDRIVE_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--iclouddrive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_ICLOUDDRIVE_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Metadata is read-only and available for the Photos service only.

Here are the possible system metadata items for the iclouddrive backend.

  --------------------------------------------------------------------------------
  Name         Help        Type        Example                Read Only
  ------------ ----------- ----------- ---------------------- --------------------
  added-time   Time the    RFC 3339    2006-01-02T15:04:05Z   Y
               item was                                       
               added to                                       
               the iCloud                                     
               library                                        

  favorite     Whether the bool                               Y
               item is                                        
               marked as                                      
               favorite                                       

  height       Image       int                                Y
               height in                                      
               pixels                                         

  hidden       Whether the bool                               Y
               item is                                        
               hidden                                         

  width        Image width int                                Y
               in pixels                                      
  --------------------------------------------------------------------------------

See the metadata docs for more info.

Internet Archive

The Internet Archive backend utilizes Items on archive.org

Refer to IAS3 API documentation for the API this backend uses.

Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, e.g. remote:item/path/to/dir.

Unlike S3, listing up all items uploaded by you isn't supported.

Once you have made a remote, you can use it like this:

Make a new item

    rclone mkdir remote:item

List the contents of a item

    rclone ls remote:item

Sync /home/local/directory to the remote item, deleting any excess files
in the item.

    rclone sync --interactive /home/local/directory remote:item

Notes

Because of Internet Archive's architecture, it enqueues write operations
(and extra post-processings) in a per-item queue. You can check item's
queue at https://catalogd.archive.org/history/item-name-here. Because of
that, all uploads/deletes will not show up immediately and takes some
time to be available. The per-item queue is enqueued to an another
queue, Item Deriver Queue. You can check the status of Item Deriver
Queue here. This queue has a limit, and it may block you from uploading,
or even deleting. You should avoid uploading a lot of small files for
better behavior.

You can optionally wait for the server's processing to finish, by
setting non-zero value to wait_archive key. By making it wait, rclone
can do normal file comparison. Make sure to set a large enough value
(e.g. 30m0s for smaller files) as it can take a long time depending on
server's queue.

About metadata

This backend supports setting, updating and reading metadata of each
file. The metadata will appear as file metadata on Internet Archive.
However, some fields are reserved by both Internet Archive and rclone.

The following are reserved by Internet Archive:

-   name
-   source
-   size
-   md5
-   crc32
-   sha1
-   format
-   old_version
-   viruscheck
-   summation

Trying to set values to these keys is ignored with a warning. Only
setting mtime is an exception. Doing so make it the identical behavior
as setting ModTime.

rclone reserves all the keys starting with rclone-. Setting value for
these keys will give you warnings, but values are set according to
request.

If there are multiple values for a key, only the first one is returned.
This is a limitation of rclone, that supports one value per one key. It
can be triggered when you did a server-side copy.

Reading metadata will also provide custom (non-standard nor reserved)
ones.

Filtering auto generated files

The Internet Archive automatically creates metadata files after upload.
These can cause problems when doing an rclone sync as rclone will try,
and fail, to delete them. These metadata files are not changeable, as
they are created by the Internet Archive automatically.

These auto-created files can be excluded from the sync using metadata
filtering.

    rclone sync ... --metadata-exclude "source=metadata" --metadata-exclude "format=Metadata"

Which excludes from the sync any files which have the source=metadata or
format=Metadata flags which are added to Internet Archive auto-created
files.

Configuration

Here is an example of making an internetarchive configuration. Most
applies to the other providers as well, any differences are described
below.

First run

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    XX / InternetArchive Items
       \ (internetarchive)
    Storage> internetarchive
    Option access_key_id.
    IAS3 Access Key.
    Leave blank for anonymous access.
    You can find one here: https://archive.org/account/s3.php
    Enter a value. Press Enter to leave empty.
    access_key_id> XXXX
    Option secret_access_key.
    IAS3 Secret Key (password).
    Leave blank for anonymous access.
    Enter a value. Press Enter to leave empty.
    secret_access_key> XXXX
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> y
    Option endpoint.
    IAS3 Endpoint.
    Leave blank for default value.
    Enter a string value. Press Enter for the default (https://s3.us.archive.org).
    endpoint> 
    Option front_endpoint.
    Host of InternetArchive Frontend.
    Leave blank for default value.
    Enter a string value. Press Enter for the default (https://archive.org).
    front_endpoint> 
    Option disable_checksum.
    Don't store MD5 checksum with object metadata.
    Normally rclone will calculate the MD5 checksum of the input before
    uploading it so it can ask the server to check the object against checksum.
    This is great for data integrity checking but can cause long delays for
    large files to start uploading.
    Enter a boolean value (true or false). Press Enter for the default (true).
    disable_checksum> true
    Option encoding.
    The encoding for the backend.
    See the [encoding section in the overview](https://rclone.org/overview/#encoding) for more info.
    Enter a encoder.MultiEncoder value. Press Enter for the default (Slash,Question,Hash,Percent,Del,Ctl,InvalidUtf8,Dot).
    encoding> 
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    Configuration complete.
    Options:
    - type: internetarchive
    - access_key_id: XXXX
    - secret_access_key: XXXX
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Standard options

Here are the Standard options specific to internetarchive (Internet
Archive).

--internetarchive-access-key-id

IAS3 Access Key.

Leave blank for anonymous access. You can find one here:
https://archive.org/account/s3.php

Properties:

-   Config: access_key_id
-   Env Var: RCLONE_INTERNETARCHIVE_ACCESS_KEY_ID
-   Type: string
-   Required: false

--internetarchive-secret-access-key

IAS3 Secret Key (password).

Leave blank for anonymous access.

Properties:

-   Config: secret_access_key
-   Env Var: RCLONE_INTERNETARCHIVE_SECRET_ACCESS_KEY
-   Type: string
-   Required: false

--internetarchive-item-derive

Whether to trigger derive on the IA item or not. If set to false, the
item will not be derived by IA upon upload. The derive process produces
a number of secondary files from an upload to make an upload more usable
on the web. Setting this to false is useful for uploading files that are
already in a format that IA can display or reduce burden on IA's
infrastructure.

Properties:

-   Config: item_derive
-   Env Var: RCLONE_INTERNETARCHIVE_ITEM_DERIVE
-   Type: bool
-   Default: true

Advanced options

Here are the Advanced options specific to internetarchive (Internet
Archive).

--internetarchive-endpoint

IAS3 Endpoint.

Leave blank for default value.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_INTERNETARCHIVE_ENDPOINT
-   Type: string
-   Default: "https://s3.us.archive.org"

--internetarchive-front-endpoint

Host of InternetArchive Frontend.

Leave blank for default value.

Properties:

-   Config: front_endpoint
-   Env Var: RCLONE_INTERNETARCHIVE_FRONT_ENDPOINT
-   Type: string
-   Default: "https://archive.org"

--internetarchive-item-metadata

Metadata to be set on the IA item, this is different from file-level
metadata that can be set using --metadata-set. Format is key=value and
the 'x-archive-meta-' prefix is automatically added.

Properties:

-   Config: item_metadata
-   Env Var: RCLONE_INTERNETARCHIVE_ITEM_METADATA
-   Type: stringArray
-   Default: []

--internetarchive-disable-checksum

Don't ask the server to test against MD5 checksum calculated by rclone.
Normally rclone will calculate the MD5 checksum of the input before
uploading it so it can ask the server to check the object against
checksum. This is great for data integrity checking but can cause long
delays for large files to start uploading.

Properties:

-   Config: disable_checksum
-   Env Var: RCLONE_INTERNETARCHIVE_DISABLE_CHECKSUM
-   Type: bool
-   Default: true

--internetarchive-wait-archive

Timeout for waiting the server's processing tasks (specifically archive
and book_op) to finish. Only enable if you need to be guaranteed to be
reflected after write operations. 0 to disable waiting. No errors to be
thrown in case of timeout.

Properties:

-   Config: wait_archive
-   Env Var: RCLONE_INTERNETARCHIVE_WAIT_ARCHIVE
-   Type: Duration
-   Default: 0s

--internetarchive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_INTERNETARCHIVE_ENCODING
-   Type: Encoding
-   Default: Slash,LtGt,CrLf,Del,Ctl,InvalidUtf8,Dot

--internetarchive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_INTERNETARCHIVE_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Metadata fields provided by Internet Archive. If there are multiple
values for a key, only the first one is returned. This is a limitation
of Rclone, that supports one value per one key.

Owner is able to add custom keys. Metadata feature grabs all the keys
including them.

Here are the possible system metadata items for the internetarchive
backend.

  --------------------------------------------------------------------------------------------------------------------------------------
  Name                  Help                               Type        Example                                      Read Only
  --------------------- ---------------------------------- ----------- -------------------------------------------- --------------------
  crc32                 CRC32 calculated by Internet       string      01234567                                     Y
                        Archive                                                                                     

  format                Name of format identified by       string      Comma-Separated Values                       Y
                        Internet Archive                                                                            

  md5                   MD5 hash calculated by Internet    string      01234567012345670123456701234567             Y
                        Archive                                                                                     

  mtime                 Time of last modification, managed RFC 3339    2006-01-02T15:04:05.999999999Z               Y
                        by Rclone                                                                                   

  name                  Full file path, without the bucket filename    backend/internetarchive/internetarchive.go   Y
                        part                                                                                        

  old_version           Whether the file was replaced and  boolean     true                                         Y
                        moved by keep-old-version flag                                                              

  rclone-ia-mtime       Time of last modification, managed RFC 3339    2006-01-02T15:04:05.999999999Z               N
                        by Internet Archive                                                                         

  rclone-mtime          Time of last modification, managed RFC 3339    2006-01-02T15:04:05.999999999Z               N
                        by Rclone                                                                                   

  rclone-update-track   Random value used by Rclone for    string      aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa             N
                        tracking changes inside Internet                                                            
                        Archive                                                                                     

  sha1                  SHA1 hash calculated by Internet   string      0123456701234567012345670123456701234567     Y
                        Archive                                                                                     

  size                  File size in bytes                 decimal     123456                                       Y
                                                           number                                                   

  source                The source of the file             string      original                                     Y

  summation             Check                              string      md5                                          Y
                        https://forum.rclone.org/t/31922                                                            
                        for how it is used                                                                          

  viruscheck            The last time viruscheck process   unixtime    1654191352                                   Y
                        was run for the file (?)                                                                    
  --------------------------------------------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Internxt Drive

Internxt Drive is a zero-knowledge encrypted cloud storage service.

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Limitations

Note: The Internxt backend may not work with all account types. Please
refer to Internxt plan details or contact Internxt support to verify
rclone compatibility with your subscription.

Configuration

Here is an example of how to make a remote called internxt. Run
rclone config and follow the prompts:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> internxt
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Internxt Drive
       \ "internxt"
    [snip]
    Storage> internxt

    Option email.
    Email of your Internxt account.
    Enter a value.
    email> user@example.com

    Option pass.
    Password.
    Enter a value.
    password>

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: internxt
    - email: user@example.com
    - pass: *** ENCRYPTED ***
    Keep this "internxt" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

If you have two-factor authentication enabled on your Internxt account,
you will be prompted to enter the code during login.

Security Considerations

The authentication process stores your password and mnemonic in the
rclone configuration file. It is strongly recommended to encrypt your
rclone config to protect these sensitive credentials:

    rclone config password

This will prompt you to set a password that encrypts your entire
configuration file.

Usage Examples

    # List files
    rclone ls internxt:

    # Copy files to Internxt
    rclone copy /local/path internxt:remote/path

    # Sync local directory to Internxt
    rclone sync /local/path internxt:remote/path

    # Mount Internxt Drive as a local filesystem
    rclone mount internxt: /path/to/mountpoint

    # Check storage usage
    rclone about internxt:

Modification times and hashes

The Internxt backend does not support hashes.

Modification times are read from the server but cannot be set. The
backend reports ModTimeNotSupported precision, so modification times
will not be used for sync comparisons.

Restricted filename characters

The Internxt backend replaces the default restricted characters set.

Standard options

Here are the Standard options specific to internxt (Internxt Drive).

--internxt-email

Email of your Internxt account.

Properties:

-   Config: email
-   Env Var: RCLONE_INTERNXT_EMAIL
-   Type: string
-   Required: true

--internxt-pass

Password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_INTERNXT_PASS
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to internxt (Internxt Drive).

--internxt-mnemonic

Mnemonic (internal use only)

Properties:

-   Config: mnemonic
-   Env Var: RCLONE_INTERNXT_MNEMONIC
-   Type: string
-   Required: false

--internxt-skip-hash-validation

Skip hash validation when downloading files.

By default, hash validation is disabled. Set this to false to enable
validation.

Properties:

-   Config: skip_hash_validation
-   Env Var: RCLONE_INTERNXT_SKIP_HASH_VALIDATION
-   Type: bool
-   Default: true

--internxt-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded
concurrently.

Note that each chunk is buffered in memory.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_INTERNXT_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 4

--internxt-upload-cutoff

Cutoff for switching to multipart upload.

Any files larger than this will be uploaded in chunks of chunk_size. The
minimum is 100 MiB and the maximum is 5 GiB.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_INTERNXT_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 100Mi

--internxt-chunk-size

Chunk size for multipart uploads.

Files larger than upload_cutoff will be uploaded in chunks of this size.

Memory usage is approximately chunk_size * upload_concurrency.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_INTERNXT_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 30Mi

--internxt-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_INTERNXT_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,CrLf,RightPeriod,InvalidUtf8,Dot

--internxt-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_INTERNXT_DESCRIPTION
-   Type: string
-   Required: false

Jottacloud

Jottacloud is a cloud storage service provider from a Norwegian company,
using its own datacenters in Norway.

In addition to the official service at jottacloud.com, it also provides
white-label solutions to different companies. The following are
currently supported by this backend, using a different authentication
setup as described below:

-   Elkjøp (with subsidiaries):
    -   Elkjøp Cloud (cloud.elkjop.no)
    -   Elgiganten Cloud (cloud.elgiganten.dk)
    -   Elgiganten Cloud (cloud.elgiganten.se)
    -   ELKO Cloud (cloud.elko.is)
    -   Gigantti Cloud (cloud.gigantti.fi)
-   Telia
    -   Telia Cloud (cloud.telia.se)
    -   Telia Sky (sky.telia.no)
-   Tele2
    -   Tele2 Cloud (mittcloud.tele2.se)
-   Onlime
    -   Onlime (onlime.dk)
-   MediaMarkt
    -   MediaMarkt Cloud (mediamarkt.jottacloud.com)
    -   Let's Go Cloud (letsgo.jotta.cloud)
-   Phonero
    -   Phonero Sky (sky.phonero.no)

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Authentication

Authentication in Jottacloud is in general based on OAuth and OpenID
Connect (OIDC). There are different variants to choose from, depending
on which service you are using, e.g. a white-label service may only
support one of them. Note that there is no documentation to rely on, so
the descriptions provided here are based on observations and may not be
accurate.

Jottacloud uses two optional OAuth security mechanisms, referred to as
"Refresh Token Rotation" and "Automatic Reuse Detection", which has some
implications. Access tokens normally have one hour expiry, after which
they need to be refreshed (rotated), an operation that requires the
refresh token to be supplied. Rclone does this automatically. This is
standard OAuth. But in Jottacloud, such a refresh operation not only
creates a new access token, but also refresh token, and invalidates the
existing refresh token, the one that was supplied. It keeps track of the
history of refresh tokens, sometimes referred to as a token family,
descending from the original refresh token that was issued after the
initial authentication. This is used to detect any attempts at reusing
old refresh tokens, and trigger an immedate invalidation of the current
refresh token, and effectively the entire refresh token family.

When the current refresh token has been invalidated, next time rclone
tries to perform a token refresh, it will fail with an error message
something along the lines of:

    CRITICAL: Failed to create file system for "remote:": (...): couldn't fetch token: invalid_grant: maybe token expired? - try refreshing with "rclone config reconnect remote:"

If you run rclone with verbosity level 2 (-vv), you will see a debug
message with an additional error description from the OAuth response:

    DEBUG : remote: got fatal oauth error: oauth2: "invalid_grant" "Session doesn't have required client"

(The error description used to be "Stale token" instead of "Session
doesn't have required client", so you may see references to that in
older descriptions of this situation.)

When this happens, you need to re-authenticate to be able to use your
remote again, e.g. using the config reconnect command as suggested in
the error message. This will create an entirely new refresh token
(family).

A typical example of how you may end up in this situation, is if you
create a Jottacloud remote with rclone in one location, and then copy
the configuration file to a second location where you start using rclone
to access the same remote. Eventually there will now be a token refresh
attempt with an invalidated token, i.e. refresh token reuse, resulting
in both instances starting to fail with the "invalid_grant" error. It is
possible to copy remote configurations, but you must then replace the
token for one of them using the config reconnect command.

You can get some overview of your active tokens in your service's web
user interface, if you navigate to "Settings" and then "Security" (in
which case you end up at https://www.jottacloud.com/web/secure or
similar). Down on that page you have a section "My logged in devices".
This contains a list of entries which seemingly represents currently
valid refresh tokens, or refresh token families. From the right side of
that list you can click a button ("X") to revoke (invalidate) it, which
means you will still have access using an existing access token until
that expires, but you will not be able to perform a token refresh. Note
that this entire "My logged in devices" feature seem to behave a bit
differently with different authentication variants and with use of the
different (white-label) services.

Standard

This is an OAuth variant designed for command-line applications. It is
primarily supported by the official service (jottacloud.com), but may
also be supported by some of the white-label services. The information
necessary to be able to perform authentication, like domain name and
endpoint to connect to, are found automatically (it is encoded into the
supplied login token, described next), so you do not need to specify
which service to configure.

When configuring a remote, you are asked to enter a single-use personal
login token, which you must manually generate from the account security
settings in the service's web interface. You do not need a web browser
on the same machine like with traditional OAuth, but need to use a web
browser somewhere, and be able to be copy the generated string into your
rclone configuration session. Log in to your service's web user
interface, navigate to "Settings" and then "Security", or, for the
official service, use the direct link presented to you by rclone when
configuring the remote: https://www.jottacloud.com/web/secure. Scroll
down to the section "Personal login token", and click the "Generate"
button. Copy the presented string and paste it where rclone asks for it.
Rclone will then use this to perform an initial token request, and
receive a regular OAuth token which it stores in your remote
configuration. There will then also be a new entry in the "My logged in
devices" list in the web interface, with device name and application
name "Jottacloud CLI".

Each time a new token is created this way, i.e. a new personal login
token is generated and traded in for an OAuth token, you get an entirely
new refresh token family, with a new entry in the "My logged in
devices". You can create as many remotes as you want, and use multiple
instances of rclone on same or different machine, as long as you
configure them separately like this, and not get your self into the
refresh token reuse issue described above.

Traditional

Jottacloud also supports a more traditional OAuth variant. Most of the
white-label services support this, and for many of them this is the only
alternative because they do not support personal login tokens. This
method relies on pre-defined service-specific domain names and
endpoints, and rclone need you to specify which service to configure.
This also means that any changes to existing or additions of new
white-label services needs an update in the rclone backend
implementation.

When configuring a remote, you must interactively login to an OAuth
authorization web site, and a one-time authorization code is sent back
to rclone behind the scene, which it uses to request an OAuth token.
This means that you need to be on a machine with an internet-connected
web browser. If you need it on a machine where this is not the case,
then you will have to create the configuration on a different machine
and copy it from there. The Jottacloud backend does not support the
rclone authorize command. See the remote setup docs for details.

Jottacloud exerts some form of strict session management when
authenticating using this method. This leads to some unexpected cases of
the "invalid_grant" error described above, and effectively limits you to
only use of a single active authentication on the same machine. I.e. you
can only create a single rclone remote, and you can't even log in with
the service's official desktop client while having a rclone remote
configured, or else you will eventually get all sessions invalidated and
are forced to re-authenticate.

When you have successfully authenticated, there will be an entry in the
"My logged in devices" list in the web interface representing your
session. It will typically be listed with application name "Jottacloud
for Desktop" or similar (it depends on the white-label service
configuration).

Legacy

Originally Jottacloud used an OAuth variant which required your
account's username and password to be specified. When Jottacloud
migrated to the newer methods, some white-label versions (those from
Elkjøp) still used this legacy method for a long time. Currently there
are no known uses of this, it is still supported by rclone, but the
support will be removed in a future version.

Configuration

Here is an example of how to make a remote called remote with the
default setup. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> remote

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Jottacloud
       \ (jottacloud)
    [snip]
    Storage> jottacloud

    Option client_id.
    OAuth Client Id.
    Leave blank normally.
    Enter a value. Press Enter to leave empty.
    client_id>

    Option client_secret.
    OAuth Client Secret.
    Leave blank normally.
    Enter a value. Press Enter to leave empty.
    client_secret>

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Option config_type.
    Type of authentication.
    Choose a number from below, or type in an existing value of type string.
    Press Enter for the default (standard).
       / Standard authentication.
       | This is primarily supported by the official service, but may also be
       | supported by some white-label services. It is designed for command-line
     1 | applications, and you will be asked to enter a single-use personal login
       | token which you must manually generate from the account security settings
       | in the web interface of your service.
       \ (standard)
       / Traditional authentication.
       | This is supported by the official service and all white-label services
       | that rclone knows about. You will be asked which service to connect to.
     2 | It has a limitation of only a single active authentication at a time. You
       | need to be on, or have access to, a machine with an internet-connected
       | web browser.
       \ (traditional)
       / Legacy authentication.
     3 | This is no longer supported by any known services and not recommended
       | used. You will be asked for your account's username and password.
       \ (legacy)
    config_type> 1

    Option config_login_token.
    Personal login token.
    Generate it from the account security settings in the web interface of your
    service, for the official service on https://www.jottacloud.com/web/secure.
    Enter a value.
    config_login_token> <your token here>

    Use a non-standard device/mountpoint?
    Choosing no, the default, will let you access the storage used for the archive
    section of the official Jottacloud client. If you instead want to access the
    sync or the backup section, for example, you must choose yes.
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: jottacloud
    - configVersion: 1
    - client_id: jottacli
    - client_secret:
    - tokenURL: https://id.jottacloud.com/auth/realms/jottacloud/protocol/openid-connect/token
    - token: {........}
    - username: 2940e57271a93d987d6f8a21
    - device: Jotta
    - mountpoint: Archive
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your Jottacloud

    rclone lsd remote:

List all the files in your Jottacloud

    rclone ls remote:

To copy a local directory to an Jottacloud directory called backup

    rclone copy /home/source remote:backup

Devices and Mountpoints

The official Jottacloud client registers a device for each computer you
install it on, and shows them in the backup section of the user
interface. For each folder you select for backup it will create a
mountpoint within this device. A built-in device called Jotta is
special, and contains mountpoints Archive, Sync and some others, used
for corresponding features in official clients.

With rclone you'll want to use the standard Jotta/Archive
device/mountpoint in most cases. However, you may for example want to
access files from the sync or backup functionality provided by the
official clients, and rclone therefore provides the option to select
other devices and mountpoints during config.

You are allowed to create new devices and mountpoints. All devices
except the built-in Jotta device are treated as backup devices by
official Jottacloud clients, and the mountpoints on them are individual
backup sets.

With the built-in Jotta device, only existing, built-in, mountpoints can
be selected. In addition to the mentioned Archive and Sync, it may
contain several other mountpoints such as: Latest, Links, Shared and
Trash. All of these are special mountpoints with a different internal
representation than the "regular" mountpoints. Rclone will only to a
very limited degree support them. Generally you should avoid these,
unless you know what you are doing.

--fast-list

This backend supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

Note that the implementation in Jottacloud always uses only a single API
request to get the entire list, so for large folders this could lead to
long wait time before the first results are shown.

Note also that with rclone version 1.58 and newer, information about
MIME types and metadata item utime are not available when using
--fast-list.

Modification times and hashes

Jottacloud allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not.

Jottacloud supports MD5 type hashes, so you can use the --checksum flag.

Note that Jottacloud requires the MD5 hash before upload so if the
source does not have an MD5 checksum then the file will be cached
temporarily on disk (in location given by --temp-dir) before it is
uploaded. Small files will be cached in memory - see the
--jottacloud-md5-memory-limit flag. When uploading from local disk the
source checksum is always available, so this does not apply. Starting
with rclone version 1.52 the same is true for encrypted remotes (in
older versions the crypt backend would not calculate hashes for uploads
from local disk, so the Jottacloud backend had to do it as described
above).

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  "            0x22        ＂
  *            0x2A        ＊
  :            0x3A        ：
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  |            0x7C        ｜
  %            0x25        ％

Invalid UTF-8 bytes will also be replaced, as they can't be used in XML
strings.

Deleting files

By default, rclone will send all files to the trash when deleting files.
They will be permanently deleted automatically after 30 days. You may
bypass the trash and permanently delete files immediately by using the
--jottacloud-hard-delete flag, or set the equivalent environment
variable. Emptying the trash is supported by the cleanup command.

Versions

Jottacloud supports file versioning. When rclone uploads a new version
of a file it creates a new version of it. Currently rclone only supports
retrieving the current version but older versions can be accessed via
the Jottacloud Website.

Versioning can be disabled by --jottacloud-no-versions option. This is
achieved by deleting the remote file prior to uploading a new version.
If the upload the fails no version of the file will be available in the
remote.

Quota information

To view your current quota you can use the rclone about remote: command
which will display your usage limit (unless it is unlimited) and the
current usage.

Standard options

Here are the Standard options specific to jottacloud (Jottacloud).

--jottacloud-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_JOTTACLOUD_CLIENT_ID
-   Type: string
-   Required: false

--jottacloud-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_JOTTACLOUD_CLIENT_SECRET
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to jottacloud (Jottacloud).

--jottacloud-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_JOTTACLOUD_TOKEN
-   Type: string
-   Required: false

--jottacloud-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_JOTTACLOUD_AUTH_URL
-   Type: string
-   Required: false

--jottacloud-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_JOTTACLOUD_TOKEN_URL
-   Type: string
-   Required: false

--jottacloud-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_JOTTACLOUD_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--jottacloud-md5-memory-limit

Files bigger than this will be cached on disk to calculate the MD5 if
required.

Properties:

-   Config: md5_memory_limit
-   Env Var: RCLONE_JOTTACLOUD_MD5_MEMORY_LIMIT
-   Type: SizeSuffix
-   Default: 10Mi

--jottacloud-trashed-only

Only show files that are in the trash.

This will show trashed files in their original directory structure.

Properties:

-   Config: trashed_only
-   Env Var: RCLONE_JOTTACLOUD_TRASHED_ONLY
-   Type: bool
-   Default: false

--jottacloud-hard-delete

Delete files permanently rather than putting them into the trash.

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_JOTTACLOUD_HARD_DELETE
-   Type: bool
-   Default: false

--jottacloud-upload-resume-limit

Files bigger than this can be resumed if the upload fail's.

Properties:

-   Config: upload_resume_limit
-   Env Var: RCLONE_JOTTACLOUD_UPLOAD_RESUME_LIMIT
-   Type: SizeSuffix
-   Default: 10Mi

--jottacloud-no-versions

Avoid server side versioning by deleting files and recreating files
instead of overwriting them.

Properties:

-   Config: no_versions
-   Env Var: RCLONE_JOTTACLOUD_NO_VERSIONS
-   Type: bool
-   Default: false

--jottacloud-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_JOTTACLOUD_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,Percent,Del,Ctl,InvalidUtf8,Dot

--jottacloud-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_JOTTACLOUD_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Jottacloud has limited support for metadata, currently an extended set
of timestamps.

Here are the possible system metadata items for the jottacloud backend.

  -----------------------------------------------------------------------------------------------------
  Name           Help            Type        Example                               Read Only
  -------------- --------------- ----------- ------------------------------------- --------------------
  btime          Time of file    RFC 3339    2006-01-02T15:04:05.999999999Z07:00   N
                 birth                                                             
                 (creation),                                                       
                 read from                                                         
                 rclone metadata                                                   

  content-type   MIME type, also string      text/plain                            Y
                 known as media                                                    
                 type                                                              

  mtime          Time of last    RFC 3339    2006-01-02T15:04:05.999999999Z07:00   N
                 modification,                                                     
                 read from                                                         
                 rclone metadata                                                   

  utime          Time of last    RFC 3339    2006-01-02T15:04:05.999999999Z07:00   Y
                 upload, when                                                      
                 current                                                           
                 revision was                                                      
                 created,                                                          
                 generated by                                                      
                 backend                                                           
  -----------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Limitations

Note that Jottacloud is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

There are quite a few characters that can't be in Jottacloud file names.
Rclone will map these names to and from an identical looking unicode
equivalent. For example if a file has a ? in it will be mapped to ？
instead.

Jottacloud only supports filenames up to 255 characters in length.

Troubleshooting

Jottacloud exhibits some inconsistent behaviours regarding deleted files
and folders which may cause Copy, Move and DirMove operations to
previously deleted paths to fail. Emptying the trash should help in such
cases.

Koofr

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

The initial setup for Koofr involves creating an application password
for rclone. You can do that by opening the Koofr web application, giving
the password a nice name like rclone and clicking on generate.

Here is an example of how to make a remote called koofr. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> koofr
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    22 / Koofr, Digi Storage and other Koofr-compatible storage providers
       \ (koofr)
    [snip]
    Storage> koofr
    Option provider.
    Choose your storage provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Koofr, https://app.koofr.net/
       \ (koofr)
     2 / Digi Storage, https://storage.rcs-rds.ro/
       \ (digistorage)
     3 / Any other Koofr API compatible storage service
       \ (other)
    provider> 1    
    Option user.
    Your user name.
    Enter a value.
    user> USERNAME
    Option password.
    Your password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password).
    Choose an alternative below.
    y) Yes, type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    --------------------
    [koofr]
    type = koofr
    provider = koofr
    user = USERNAME
    password = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

You can choose to edit advanced config in order to enter your own
service URL if you use an on-premise or white label Koofr instance, or
choose an alternative mount instead of your primary storage.

Once configured you can then use rclone like this:

List directories in top level of your Koofr

    rclone lsd koofr:

List all the files in your Koofr

    rclone ls koofr:

To copy a local directory to an Koofr directory called backup

    rclone copy /home/source koofr:backup

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼

Invalid UTF-8 bytes will also be replaced, as they can't be used in XML
strings.

Standard options

Here are the Standard options specific to koofr (Koofr, Digi Storage and
other Koofr-compatible storage providers).

--koofr-provider

Choose your storage provider.

Properties:

-   Config: provider
-   Env Var: RCLONE_KOOFR_PROVIDER
-   Type: string
-   Required: false
-   Examples:
    -   "koofr"
        -   Koofr, https://app.koofr.net/
    -   "digistorage"
        -   Digi Storage, https://storage.rcs-rds.ro/
    -   "other"
        -   Any other Koofr API compatible storage service

--koofr-endpoint

The Koofr API endpoint to use.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_KOOFR_ENDPOINT
-   Provider: other
-   Type: string
-   Required: true

--koofr-user

Your user name.

Properties:

-   Config: user
-   Env Var: RCLONE_KOOFR_USER
-   Type: string
-   Required: true

--koofr-password

Your password for rclone generate one at
https://app.koofr.net/app/admin/preferences/password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_KOOFR_PASSWORD
-   Provider: koofr
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to koofr (Koofr, Digi Storage and
other Koofr-compatible storage providers).

--koofr-mountid

Mount ID of the mount to use.

If omitted, the primary mount is used.

Properties:

-   Config: mountid
-   Env Var: RCLONE_KOOFR_MOUNTID
-   Type: string
-   Required: false

--koofr-setmtime

Does the backend support setting modification time.

Set this to false if you use a mount ID that points to a Dropbox or
Amazon Drive backend.

Properties:

-   Config: setmtime
-   Env Var: RCLONE_KOOFR_SETMTIME
-   Type: bool
-   Default: true

--koofr-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_KOOFR_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--koofr-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_KOOFR_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Note that Koofr is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

Providers

Koofr

This is the original Koofr storage provider used as main example and
described in the configuration section above.

Digi Storage

Digi Storage is a cloud storage service run by Digi.ro that provides a
Koofr API.

Here is an example of how to make a remote called ds. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> ds
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    22 / Koofr, Digi Storage and other Koofr-compatible storage providers
       \ (koofr)
    [snip]
    Storage> koofr
    Option provider.
    Choose your storage provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Koofr, https://app.koofr.net/
       \ (koofr)
     2 / Digi Storage, https://storage.rcs-rds.ro/
       \ (digistorage)
     3 / Any other Koofr API compatible storage service
       \ (other)
    provider> 2
    Option user.
    Your user name.
    Enter a value.
    user> USERNAME
    Option password.
    Your password for rclone (generate one at https://storage.rcs-rds.ro/app/admin/preferences/password).
    Choose an alternative below.
    y) Yes, type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    --------------------
    [ds]
    type = koofr
    provider = digistorage
    user = USERNAME
    password = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Other

You may also want to use another, public or private storage provider
that runs a Koofr API compatible service, by simply providing the base
URL to connect to.

Here is an example of how to make a remote called other. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> other
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    22 / Koofr, Digi Storage and other Koofr-compatible storage providers
       \ (koofr)
    [snip]
    Storage> koofr
    Option provider.
    Choose your storage provider.
    Choose a number from below, or type in your own value.
    Press Enter to leave empty.
     1 / Koofr, https://app.koofr.net/
       \ (koofr)
     2 / Digi Storage, https://storage.rcs-rds.ro/
       \ (digistorage)
     3 / Any other Koofr API compatible storage service
       \ (other)
    provider> 3
    Option endpoint.
    The Koofr API endpoint to use.
    Enter a value.
    endpoint> https://koofr.other.org
    Option user.
    Your user name.
    Enter a value.
    user> USERNAME
    Option password.
    Your password for rclone (generate one at your service's settings page).
    Choose an alternative below.
    y) Yes, type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    --------------------
    [other]
    type = koofr
    provider = other
    endpoint = https://koofr.other.org
    user = USERNAME
    password = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Linkbox

Linkbox is a private cloud drive.

Configuration

Here is an example of making a remote for Linkbox.

You will need: - An API token from
https://www.linkbox.to/admin/account - The email and password for your
Linkbox account

Note: As of v1.74, email and password are required in addition to the
API token. The API token is used for uploads and modifications, while
email/password authentication is used for listing and downloading files.
If you have an existing Linkbox remote, you will need to reconfigure it
with rclone config to edit the remote and add the email and password.

First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> remote

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    XX / Linkbox
       \ (linkbox)
    Storage> XX

    Option token.
    Token from https://www.linkbox.to/admin/account
    Enter a value.
    token> YOUR_API_TOKEN

    Option email.
    Email for login
    Enter a value.
    email> your@email.com

    Option password.
    Password for login
    Enter a value.
    password> YOUR_PASSWORD

    Configuration complete.
    Options:
    - type: linkbox
    - token: XXXXXXXXXXX
    - email: your@email.com
    - password: *** ENCRYPTED ***
    Keep this "linkbox" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Standard options

Here are the Standard options specific to linkbox (Linkbox).

--linkbox-token

Token from https://www.linkbox.to/admin/account

Properties:

-   Config: token
-   Env Var: RCLONE_LINKBOX_TOKEN
-   Type: string
-   Required: true

--linkbox-email

Email for login

Properties:

-   Config: email
-   Env Var: RCLONE_LINKBOX_EMAIL
-   Type: string
-   Required: true

--linkbox-password

Password for login

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_LINKBOX_PASSWORD
-   Type: string
-   Required: true

--linkbox-web-token

Web API login token - set automatically.

Properties:

-   Config: web_token
-   Env Var: RCLONE_LINKBOX_WEB_TOKEN
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to linkbox (Linkbox).

--linkbox-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_LINKBOX_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Mail.ru Cloud

Mail.ru Cloud is a cloud storage provided by a Russian internet company
Mail.Ru Group. The official desktop client is Disk-O:, available on
Windows and Mac OS.

Features highlights

-   Paths may be as deep as required, e.g. remote:directory/subdirectory
-   Files have a last modified time property, directories don't
-   Deleted files are by default moved to the trash
-   Files and directories can be shared via public links
-   Partial uploads or streaming are not supported, file size must be
    known before upload
-   Maximum file size is limited to 2G for a free account, unlimited for
    paid accounts
-   Storage keeps hash for all files and performs transparent
    deduplication, the hash algorithm is a modified SHA1
-   If a particular file is already present in storage, one can quickly
    submit file hash instead of long file upload (this optimization is
    supported by rclone)

Configuration

Here is an example of making a mailru configuration.

First create a Mail.ru Cloud account and choose a tariff.

You will need to log in and create an app password for rclone. Rclone
will not work with your normal username and password - it will give an
error like oauth2: server response missing access_token.

-   Click on your user icon in the top right
-   Go to Security / "Пароль и безопасность"
-   Click password for apps / "Пароли для внешних приложений"
-   Add the password - give it a name - eg "rclone"
-   Select the permissions level. For some reason just "Full access to
    Cloud" (WebDav) doesn't work for Rclone currently. You have to
    select "Full access to Mail, Cloud and Calendar" (all protocols).
    (thread on forum.rclone.org)
-   Copy the password and use this password below - your normal login
    password won't work.

Now run

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Mail.ru Cloud
       \ "mailru"
    [snip]
    Storage> mailru
    User name (usually email)
    Enter a string value. Press Enter for the default ("").
    user> username@mail.ru
    Password

    This must be an app password - rclone will not work with your normal
    password. See the Configuration section in the docs for how to make an
    app password.
    y) Yes type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Skip full upload if there is another file with same data hash.
    This feature is called "speedup" or "put by hash". It is especially efficient
    in case of generally available files like popular books, video or audio clips
    [snip]
    Enter a boolean value (true or false). Press Enter for the default ("true").
    Choose a number from below, or type in your own value
     1 / Enable
       \ "true"
     2 / Disable
       \ "false"
    speedup_enable> 1
    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> n
    Remote config
    Configuration complete.
    Options:
    - type: mailru
    - user: username@mail.ru
    - pass: *** ENCRYPTED ***
    - speedup_enable: true
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Configuration of this backend does not require a local web browser. You
can use the configured backend as shown below:

See top level directories

    rclone lsd remote:

Make a new directory

    rclone mkdir remote:directory

List the contents of a directory

    rclone ls remote:directory

Sync /home/local/directory to the remote path, deleting any excess files
in the path.

    rclone sync --interactive /home/local/directory remote:directory

Modification times and hashes

Files support a modification time attribute with up to 1 second
precision. Directories do not have a modification time, which is shown
as "Jan 1 1970".

File hashes are supported, with a custom Mail.ru algorithm based on
SHA1. If file size is less than or equal to the SHA1 block size (20
bytes), its hash is simply its data right-padded with zero bytes. Hashes
of a larger file is computed as a SHA1 of the file data bytes
concatenated with a decimal representation of the data length.

Emptying Trash

Removing a file or directory actually moves it to the trash, which is
not visible to rclone but can be seen in a web browser. The trashed file
still occupies part of total quota. If you wish to empty your trash and
free some quota, you can use the rclone cleanup remote: command, which
will permanently delete all your trashed files. This command does not
take any path arguments.

Quota information

To view your current quota you can use the rclone about remote: command
which will display your usage limit (quota) and the current usage.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  "            0x22        ＂
  *            0x2A        ＊
  :            0x3A        ：
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  \            0x5C        ＼
  |            0x7C        ｜

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to mailru (Mail.ru Cloud).

--mailru-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_MAILRU_CLIENT_ID
-   Type: string
-   Required: false

--mailru-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_MAILRU_CLIENT_SECRET
-   Type: string
-   Required: false

--mailru-user

User name (usually email).

Properties:

-   Config: user
-   Env Var: RCLONE_MAILRU_USER
-   Type: string
-   Required: true

--mailru-pass

Password.

This must be an app password - rclone will not work with your normal
password. See the Configuration section in the docs for how to make an
app password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_MAILRU_PASS
-   Type: string
-   Required: true

--mailru-speedup-enable

Skip full upload if there is another file with same data hash.

This feature is called "speedup" or "put by hash". It is especially
efficient in case of generally available files like popular books, video
or audio clips, because files are searched by hash in all accounts of
all mailru users. It is meaningless and ineffective if source file is
unique or encrypted. Please note that rclone may need local memory and
disk space to calculate content hash in advance and decide whether full
upload is required. Also, if rclone does not know file size in advance
(e.g. in case of streaming or partial uploads), it will not even try
this optimization.

Properties:

-   Config: speedup_enable
-   Env Var: RCLONE_MAILRU_SPEEDUP_ENABLE
-   Type: bool
-   Default: true
-   Examples:
    -   "true"
        -   Enable
    -   "false"
        -   Disable

Advanced options

Here are the Advanced options specific to mailru (Mail.ru Cloud).

--mailru-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_MAILRU_TOKEN
-   Type: string
-   Required: false

--mailru-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_MAILRU_AUTH_URL
-   Type: string
-   Required: false

--mailru-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_MAILRU_TOKEN_URL
-   Type: string
-   Required: false

--mailru-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_MAILRU_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--mailru-speedup-file-patterns

Comma separated list of file name patterns eligible for speedup (put by
hash).

Patterns are case insensitive and can contain '*' or '?' meta
characters.

Properties:

-   Config: speedup_file_patterns
-   Env Var: RCLONE_MAILRU_SPEEDUP_FILE_PATTERNS
-   Type: string
-   Default: ".mkv,.avi,.mp4,.mp3,.zip,.gz,.rar,.pdf"
-   Examples:
    -   ""
        -   Empty list completely disables speedup (put by hash).
    -   "*"
        -   All files will be attempted for speedup.
    -   ".mkv,.avi,.mp4,.mp3"
        -   Only common audio/video files will be tried for put by hash.
    -   ".zip,.gz,.rar,.pdf"
        -   Only common archives or PDF books will be tried for speedup.

--mailru-speedup-max-disk

This option allows you to disable speedup (put by hash) for large files.

Reason is that preliminary hashing can exhaust your RAM or disk space.

Properties:

-   Config: speedup_max_disk
-   Env Var: RCLONE_MAILRU_SPEEDUP_MAX_DISK
-   Type: SizeSuffix
-   Default: 3Gi
-   Examples:
    -   "0"
        -   Completely disable speedup (put by hash).
    -   "1G"
        -   Files larger than 1Gb will be uploaded directly.
    -   "3G"
        -   Choose this option if you have less than 3Gb free on local
            disk.

--mailru-speedup-max-memory

Files larger than the size given below will always be hashed on disk.

Properties:

-   Config: speedup_max_memory
-   Env Var: RCLONE_MAILRU_SPEEDUP_MAX_MEMORY
-   Type: SizeSuffix
-   Default: 32Mi
-   Examples:
    -   "0"
        -   Preliminary hashing will always be done in a temporary disk
            location.
    -   "32M"
        -   Do not dedicate more than 32Mb RAM for preliminary hashing.
    -   "256M"
        -   You have at most 256Mb RAM free for hash calculations.

--mailru-check-hash

What should copy do if file checksum is mismatched or invalid.

Properties:

-   Config: check_hash
-   Env Var: RCLONE_MAILRU_CHECK_HASH
-   Type: bool
-   Default: true
-   Examples:
    -   "true"
        -   Fail with error.
    -   "false"
        -   Ignore and continue.

--mailru-user-agent

HTTP user agent used internally by client.

Defaults to "rclone/VERSION" or "--user-agent" provided on command line.

Properties:

-   Config: user_agent
-   Env Var: RCLONE_MAILRU_USER_AGENT
-   Type: string
-   Required: false

--mailru-quirks

Comma separated list of internal maintenance flags.

This option must not be used by an ordinary user. It is intended only to
facilitate remote troubleshooting of backend issues. Strict meaning of
flags is not documented and not guaranteed to persist between releases.
Quirks will be removed when the backend grows stable. Supported quirks:
atomicmkdir binlist unknowndirs

Properties:

-   Config: quirks
-   Env Var: RCLONE_MAILRU_QUIRKS
-   Type: string
-   Required: false

--mailru-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_MAILRU_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot

--mailru-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_MAILRU_DESCRIPTION
-   Type: string
-   Required: false

Limitations

File size limits depend on your account. A single file size is limited
by 2G for a free account and unlimited for paid tariffs. Please refer to
the Mail.ru site for the total uploaded size limits.

Note that Mailru is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

Mega

Mega is a cloud storage and file hosting service known for its security
feature where all files are encrypted locally before they are uploaded.
This prevents anyone (including employees of Mega) from accessing the
files without knowledge of the key used for encryption.

This is an rclone backend for Mega which supports the file transfer
features of Mega using the same client side encryption.

Note MEGA S4 Object Storage, an S3 compatible object store, also works
with rclone and this is recommended for new projects.

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Mega
       \ "mega"
    [snip]
    Storage> mega
    User name
    user> you@example.com
    Password.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Remote config
    Configuration complete.
    Options:
    - type: mega
    - user: you@example.com
    - pass: *** ENCRYPTED ***
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

NOTE: The encryption keys need to have been already generated after a
regular login via the browser, otherwise attempting to use the
credentials in rclone will fail.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your Mega

    rclone lsd remote:

List all the files in your Mega

    rclone ls remote:

To copy a local directory to an Mega directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

Mega does not support modification times or hashes yet.

Restricted filename characters

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  /            0x2F        ／

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Duplicated files

Mega can have two files with exactly the same name and path (unlike a
normal file system).

Duplicated files cause problems with the syncing and you will see
messages in the log about duplicates.

Use rclone dedupe to fix duplicated files.

Failure to log-in

Object not found

If you are connecting to your Mega remote for the first time, to test
access and synchronization, you may receive an error such as

    Failed to create file system for "my-mega-remote:":
    couldn't login: Object (typically, node or user) not found

The diagnostic steps often recommended in the rclone forum start with
the MEGAcmd utility. Note that this refers to the official C++ command
from https://github.com/meganz/MEGAcmd and not the go language built
command from t3rm1n4l/megacmd that is no longer maintained.

Follow the instructions for installing MEGAcmd and try accessing your
remote as they recommend. You can establish whether or not you can log
in using MEGAcmd, and obtain diagnostic information to help you, and
search or work with others in the forum.

    MEGA CMD> login me@example.com
    Password:
    Fetching nodes ...
    Loading transfers from local cache
    Login complete as me@example.com
    me@example.com:/$ 

Note that some have found issues with passwords containing special
characters. If you can not log on with rclone, but MEGAcmd logs on just
fine, then consider changing your password temporarily to pure
alphanumeric characters, in case that helps.

Repeated commands blocks access

Mega remotes seem to get blocked (reject logins) under "heavy use". We
haven't worked out the exact blocking rules but it seems to be related
to fast paced, successive rclone commands.

For example, executing this command 90 times in a row
rclone link remote:file will cause the remote to become "blocked". This
is not an abnormal situation, for example if you wish to get the public
links of a directory with hundred of files... After more or less a week,
the remote will remote accept rclone logins normally again.

You can mitigate this issue by mounting the remote it with rclone mount.
This will log-in when mounting and a log-out when unmounting only. You
can also run rclone rcd and then use rclone rc to run the commands over
the API to avoid logging in each time.

Rclone does not currently close mega sessions (you can see them in the
web interface), however closing the sessions does not solve the issue.

If you space rclone commands by 3 seconds it will avoid blocking the
remote. We haven't identified the exact blocking rules, so perhaps one
could execute the command 80 times without waiting and avoid blocking by
waiting 3 seconds, then continuing...

Note that this has been observed by trial and error and might not be set
in stone.

Other tools seem not to produce this blocking effect, as they use a
different working approach (state-based, using sessionIDs instead of
log-in) which isn't compatible with the current stateless rclone
approach.

Note that once blocked, the use of other tools (such as megacmd) is not
a sure workaround: following megacmd login times have been observed in
succession for blocked remote: 7 minutes, 20 min, 30min, 30 min, 30min.
Web access looks unaffected though.

Investigation is continuing in relation to workarounds based on
timeouts, pacers, retrials and tpslimits - if you discover something
relevant, please post on the forum.

So, if rclone was working nicely and suddenly you are unable to log-in
and you are sure the user and the password are correct, likely you have
got the remote blocked for a while.

Standard options

Here are the Standard options specific to mega (Mega).

--mega-user

User name.

Properties:

-   Config: user
-   Env Var: RCLONE_MEGA_USER
-   Type: string
-   Required: true

--mega-pass

Password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_MEGA_PASS
-   Type: string
-   Required: true

--mega-2fa

The 2FA code of your MEGA account if the account is set up with one

Properties:

-   Config: 2fa
-   Env Var: RCLONE_MEGA_2FA
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to mega (Mega).

--mega-session-id

Session (internal use only)

Properties:

-   Config: session_id
-   Env Var: RCLONE_MEGA_SESSION_ID
-   Type: string
-   Required: false

--mega-master-key

Master key (internal use only)

Properties:

-   Config: master_key
-   Env Var: RCLONE_MEGA_MASTER_KEY
-   Type: string
-   Required: false

--mega-debug

Output more debug from Mega.

If this flag is set (along with -vv) it will print further debugging
information from the mega backend.

Properties:

-   Config: debug
-   Env Var: RCLONE_MEGA_DEBUG
-   Type: bool
-   Default: false

--mega-hard-delete

Delete files permanently rather than putting them into the trash.

Normally the mega backend will put all deletions into the trash rather
than permanently deleting them. If you specify this then rclone will
permanently delete objects instead.

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_MEGA_HARD_DELETE
-   Type: bool
-   Default: false

--mega-use-https

Use HTTPS for transfers.

MEGA uses plain text HTTP connections by default. Some ISPs throttle
HTTP connections, this causes transfers to become very slow. Enabling
this will force MEGA to use HTTPS for all transfers. HTTPS is normally
not necessary since all data is already encrypted anyway. Enabling it
will increase CPU usage and add network overhead.

Properties:

-   Config: use_https
-   Env Var: RCLONE_MEGA_USE_HTTPS
-   Type: bool
-   Default: false

--mega-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_MEGA_ENCODING
-   Type: Encoding
-   Default: Slash,InvalidUtf8,Dot

--mega-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_MEGA_DESCRIPTION
-   Type: string
-   Required: false

Process killed

On accounts with large files or something else, memory usage can
significantly increase when executing list/sync instructions. When
running on cloud providers (like AWS with EC2), check if the instance
type has sufficient memory/CPU to execute the commands. Use the resource
monitoring tools to inspect after sending the commands. Look at this
issue.

Limitations

This backend uses the go-mega go library which is an opensource go
library implementing the Mega API. There doesn't appear to be any
documentation for the mega protocol beyond the mega C++ SDK source code
so there are likely quite a few errors still remaining in this library.

Mega allows duplicate files which may confuse rclone.

Memory

The memory backend is an in RAM backend. It does not persist its data -
use the local backend for that.

The memory backend behaves like a bucket-based remote (e.g. like s3).
Because it has no parameters you can just use it with the :memory:
remote name.

Configuration

You can configure it as a remote like this with rclone config too if you
want to:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Memory
       \ "memory"
    [snip]
    Storage> memory
    ** See help for memory backend at: https://rclone.org/memory/ **

    Remote config

    Configuration complete.
    Options:
    - type: memory
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Because the memory backend isn't persistent it is most useful for
testing or with an rclone server or rclone mount, e.g.

    rclone mount :memory: /mnt/tmp
    rclone serve webdav :memory:
    rclone serve sftp :memory:

Modification times and hashes

The memory backend supports MD5 hashes and modification times accurate
to 1 nS.

Restricted filename characters

The memory backend replaces the default restricted characters set.

Advanced options

Here are the Advanced options specific to memory (In memory object
storage system.).

--memory-discard

If set all writes will be discarded and reads will return an error

If set then when files are uploaded the contents not be saved. The files
will appear to have been uploaded but will give an error on read. Files
will have their MD5 sum calculated on upload which takes very little CPU
time and allows the transfers to be checked.

This can be useful for testing performance.

Probably most easily used by using the connection string syntax:

    :memory,discard:bucket

Properties:

-   Config: discard
-   Env Var: RCLONE_MEMORY_DISCARD
-   Type: bool
-   Default: false

--memory-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_MEMORY_DESCRIPTION
-   Type: string
-   Required: false

Akamai NetStorage

Paths are specified as remote: You may put subdirectories in too, e.g.
remote:/path/to/dir. If you have a CP code you can use that as the
folder after the domain such as <domain>/<cpcode>/<internal directories
within cpcode>.

For example, this is commonly configured with or without a CP code:

-   With a CP code.
    [your-domain-prefix]-nsu.akamaihd.net/123456/subdirectory/
-   Without a CP code. [your-domain-prefix]-nsu.akamaihd.net

See all buckets

    rclone lsd remote:

The initial setup for Netstorage involves getting an account and secret.
Use rclone config to walk you through the setup process.

Configuration

Here's an example of how to make a remote called ns1.

1.  To begin the interactive configuration process, enter this command:

        rclone config

2.  Type n to create a new remote.

        n) New remote
        d) Delete remote
        q) Quit config
        e/n/d/q> n

3.  For this example, enter ns1 when you reach the name> prompt.

        name> ns1

4.  Enter netstorage as the type of storage to configure.

        Type of storage to configure.
        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
        XX / NetStorage
           \ "netstorage"
        Storage> netstorage

5.  Select between the HTTP or HTTPS protocol. Most users should choose
    HTTPS, which is the default. HTTP is provided primarily for
    debugging purposes.

        Enter a string value. Press Enter for the default ("").
        Choose a number from below, or type in your own value
         1 / HTTP protocol
           \ "http"
         2 / HTTPS protocol
           \ "https"
        protocol> 1

6.  Specify your NetStorage host, CP code, and any necessary content
    paths using this format: <domain>/<cpcode>/<content>/

        Enter a string value. Press Enter for the default ("").
        host> baseball-nsu.akamaihd.net/123456/content/

7.  Set the netstorage account name

        Enter a string value. Press Enter for the default ("").
        account> username

8.  Set the Netstorage account secret/G2O key which will be used for
    authentication purposes. Select the y option to set your own
    password then enter your secret. Note: The secret is stored in the
    rclone.conf file with hex-encoded encryption.

        y) Yes type in my own password
        g) Generate random password
        y/g> y
        Enter the password:
        password:
        Confirm the password:
        password:

9.  View the summary and confirm your remote configuration.

        [ns1]
        type = netstorage
        protocol = http
        host = baseball-nsu.akamaihd.net/123456/content/
        account = username
        secret = *** ENCRYPTED ***
        --------------------
        y) Yes this is OK (default)
        e) Edit this remote
        d) Delete this remote
        y/e/d> y

This remote is called ns1 and can now be used.

Example operations

Get started with rclone and NetStorage with these examples. For
additional rclone commands, visit https://rclone.org/commands/.

See contents of a directory in your project

    rclone lsd ns1:/974012/testing/

Sync the contents local with remote

    rclone sync . ns1:/974012/testing/

Upload local content to remote

    rclone copy notes.txt ns1:/974012/testing/

Delete content on remote

    rclone delete ns1:/974012/testing/notes.txt

Move or copy content between CP codes

Your credentials must have access to two CP codes on the same remote.
You can't perform operations between different remotes.

    rclone move ns1:/974012/testing/notes.txt ns1:/974450/testing2/

Features

Symlink Support

The Netstorage backend changes the rclone --links, -l behavior. When
uploading, instead of creating the .rclonelink file, use the "symlink"
API in order to create the corresponding symlink on the remote. The
.rclonelink file will not be created, the upload will be intercepted and
only the symlink file that matches the source file name with no suffix
will be created on the remote.

This will effectively allow commands like copy/copyto, move/moveto and
sync to upload from local to remote and download from remote to local
directories with symlinks. Due to internal rclone limitations, it is not
possible to upload an individual symlink file to any remote backend. You
can always use the "backend symlink" command to create a symlink on the
NetStorage server, refer to "symlink" section below.

Individual symlink files on the remote can be used with the commands
like "cat" to print the destination name, or "delete" to delete symlink,
or copy, copy/to and move/moveto to download from the remote to local.
Note: individual symlink files on the remote should be specified
including the suffix .rclonelink.

Note: No file with the suffix .rclonelink should ever exist on the
server since it is not possible to actually upload/create a file with
.rclonelink suffix with rclone, it can only exist if it is manually
created through a non-rclone method on the remote.

Implicit vs. Explicit Directories

With NetStorage, directories can exist in one of two forms:

1.  Explicit Directory. This is an actual, physical directory that you
    have created in a storage group.
2.  Implicit Directory. This refers to a directory within a path that
    has not been physically created. For example, during upload of a
    file, nonexistent subdirectories can be specified in the target
    path. NetStorage creates these as "implicit." While the directories
    aren't physically created, they exist implicitly and the noted path
    is connected with the uploaded file.

Rclone will intercept all file uploads and mkdir commands for the
NetStorage remote and will explicitly issue the mkdir command for each
directory in the uploading path. This will help with the
interoperability with the other Akamai services such as SFTP and the
Content Management Shell (CMShell). Rclone will not guarantee
correctness of operations with implicit directories which might have
been created as a result of using an upload API directly.

--fast-list / ListR support

NetStorage remote supports the ListR feature by using the "list"
NetStorage API action to return a lexicographical list of all objects
within the specified CP code, recursing into subdirectories as they're
encountered.

-   Rclone will use the ListR method for some commands by default.
    Commands such as lsf -R will use ListR by default. To disable this,
    include the --disable listR option to use the non-recursive method
    of listing objects.

-   Rclone will not use the ListR method for some commands. Commands
    such as sync don't use ListR by default. To force using the ListR
    method, include the --fast-list option.

There are pros and cons of using the ListR method, refer to rclone
documentation. In general, the sync command over an existing deep tree
on the remote will run faster with the "--fast-list" flag but with extra
memory usage as a side effect. It might also result in higher CPU
utilization but the whole task can be completed faster.

Note: There is a known limitation that "lsf -R" will display number of
files in the directory and directory size as -1 when ListR method is
used. The workaround is to pass "--disable listR" flag if these numbers
are important in the output.

Purge

NetStorage remote supports the purge feature by using the "quick-delete"
NetStorage API action. The quick-delete action is disabled by default
for security reasons and can be enabled for the account through the
Akamai portal. Rclone will first try to use quick-delete action for the
purge command and if this functionality is disabled then will fall back
to a standard delete method.

Note: Read the NetStorage Usage API for considerations when using
"quick-delete". In general, using quick-delete method will not delete
the tree immediately and objects targeted for quick-delete may still be
accessible.

Standard options

Here are the Standard options specific to netstorage (Akamai
NetStorage).

--netstorage-host

Domain+path of NetStorage host to connect to.

Format should be <domain>/<internal folders>

Properties:

-   Config: host
-   Env Var: RCLONE_NETSTORAGE_HOST
-   Type: string
-   Required: true

--netstorage-account

Set the NetStorage account name

Properties:

-   Config: account
-   Env Var: RCLONE_NETSTORAGE_ACCOUNT
-   Type: string
-   Required: true

--netstorage-secret

Set the NetStorage account secret/G2O key for authentication.

Please choose the 'y' option to set your own password then enter your
secret.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: secret
-   Env Var: RCLONE_NETSTORAGE_SECRET
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to netstorage (Akamai
NetStorage).

--netstorage-protocol

Select between HTTP or HTTPS protocol.

Most users should choose HTTPS, which is the default. HTTP is provided
primarily for debugging purposes.

Properties:

-   Config: protocol
-   Env Var: RCLONE_NETSTORAGE_PROTOCOL
-   Type: string
-   Default: "https"
-   Examples:
    -   "http"
        -   HTTP protocol
    -   "https"
        -   HTTPS protocol

--netstorage-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_NETSTORAGE_DESCRIPTION
-   Type: string
-   Required: false

Backend commands

Here are the commands specific to the netstorage backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

du

Return disk usage information for a specified directory.

    rclone backend du remote: [options] [<arguments>+]

The usage information returned, includes the targeted directory as well
as all files stored in any sub-directories that may exist.

symlink

You can create a symbolic link in ObjectStore with the symlink action.

    rclone backend symlink remote: [options] [<arguments>+]

The desired path location (including applicable sub-directories) ending
in the object that will be the target of the symlink (for example,
/links/mylink). Include the file extension for the object, if
applicable.

Usage example:

    rclone backend symlink <src> <path>

Microsoft Azure Blob Storage

Paths are specified as remote:container (or remote: for the lsd
command.) You may put subdirectories in too, e.g.
remote:container/path/to/dir.

Configuration

Here is an example of making a Microsoft Azure Blob Storage
configuration. For a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Microsoft Azure Blob Storage
       \ "azureblob"
    [snip]
    Storage> azureblob
    Storage Account Name
    account> account_name
    Storage Account Key
    key> base64encodedkey==
    Endpoint for the service - leave blank normally.
    endpoint> 
    Remote config
    Configuration complete.
    Options:
    - type: azureblob
    - account: account_name
    - key: base64encodedkey==
    - endpoint:
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See all containers

    rclone lsd remote:

Make a new container

    rclone mkdir remote:container

List the contents of a container

    rclone ls remote:container

Sync /home/local/directory to the remote container, deleting any excess
files in the container.

    rclone sync --interactive /home/local/directory remote:container

--fast-list

This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

Modification times and hashes

The modification time is stored as metadata on the object with the mtime
key. It is stored using RFC3339 Format time with nanosecond precision.
The metadata is supplied during directory listings so there is no
performance overhead to using it.

If you wish to use the Azure standard LastModified time stored on the
object as the modified time, then use the --use-server-modtime flag.
Note that rclone can't set LastModified, so using the --update flag when
syncing is recommended if using --use-server-modtime.

MD5 hashes are stored with blobs. However blobs that were uploaded in
chunks only have an MD5 if the source remote was capable of MD5 hashes,
e.g. the local disk.

Metadata and tags

Rclone can map arbitrary metadata to Azure Blob headers, user metadata,
and tags when --metadata is enabled (or when using --metadata-set /
--metadata-mapper).

-   Headers: Set these keys in metadata to map to the corresponding blob
    headers:
    -   cache-control, content-disposition, content-encoding,
        content-language, content-type.
-   User metadata: Any other non-reserved keys are written as user
    metadata (keys are normalized to lowercase). Keys starting with
    x-ms- are reserved and are not stored as user metadata.
-   Tags: Provide x-ms-tags as a comma-separated list of key=value
    pairs, e.g. x-ms-tags=env=dev,team=sync. These are applied as blob
    tags on upload and on server-side copies. Whitespace around
    keys/values is ignored.
-   Modtime override: Provide mtime in RFC3339/RFC3339Nano format to
    override the stored modtime persisted in user metadata. If mtime
    cannot be parsed, rclone logs a debug message and ignores the
    override.

Notes: - Rclone ignores reserved x-ms-* keys (except x-ms-tags) for user
metadata.

Performance

When uploading large files, increasing the value of
--azureblob-upload-concurrency will increase performance at the cost of
using more memory. The default of 16 is set quite conservatively to use
less memory. It maybe be necessary raise it to 64 or higher to fully
utilize a 1 GBit/s link with a single file transfer.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  /            0x2F        ／
  \            0x5C        ＼

File names can also not end with the following characters. These only
get replaced if they are the last character in the name:

  Character    Value   Replacement
  ----------- ------- -------------
  .            0x2E        ．

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Authentication

There are a number of ways of supplying credentials for Azure Blob
Storage. Rclone tries them in the order of the sections below.

Env Auth

If the env_auth config parameter is true then rclone will pull
credentials from the environment or runtime.

It tries these authentication methods in this order:

1.  Environment Variables
2.  Managed Service Identity Credentials
3.  Azure CLI credentials (as used by the az tool)

These are described in the following sections

Env Auth: 1. Environment Variables

If env_auth is set and environment variables are present rclone
authenticates a service principal with a secret or certificate, or a
user with a password, depending on which environment variable are set.
It reads configuration from these variables, in the following order:

1.  Service principal with client secret
    -   AZURE_TENANT_ID: ID of the service principal's tenant. Also
        called its "directory" ID.
    -   AZURE_CLIENT_ID: the service principal's client ID
    -   AZURE_CLIENT_SECRET: one of the service principal's client
        secrets
2.  Service principal with certificate
    -   AZURE_TENANT_ID: ID of the service principal's tenant. Also
        called its "directory" ID.
    -   AZURE_CLIENT_ID: the service principal's client ID
    -   AZURE_CLIENT_CERTIFICATE_PATH: path to a PEM or PKCS12
        certificate file including the private key.
    -   AZURE_CLIENT_CERTIFICATE_PASSWORD: (optional) password for the
        certificate file.
    -   AZURE_CLIENT_SEND_CERTIFICATE_CHAIN: (optional) Specifies
        whether an authentication request will include an x5c header to
        support subject name / issuer based authentication. When set to
        "true" or "1", authentication requests include the x5c header.
3.  User with username and password
    -   AZURE_TENANT_ID: (optional) tenant to authenticate in. Defaults
        to "organizations".
    -   AZURE_CLIENT_ID: client ID of the application the user will
        authenticate to
    -   AZURE_USERNAME: a username (usually an email address)
    -   AZURE_PASSWORD: the user's password
4.  Workload Identity
    -   AZURE_TENANT_ID: Tenant to authenticate in
    -   AZURE_CLIENT_ID: Client ID of the application the user will
        authenticate to
    -   AZURE_FEDERATED_TOKEN_FILE: Path to projected service account
        token file
    -   AZURE_AUTHORITY_HOST: Authority of an Azure Active Directory
        endpoint (default: login.microsoftonline.com).

Env Auth: 2. Managed Service Identity Credentials

When using Managed Service Identity if the VM(SS) on which this program
is running has a system-assigned identity, it will be used by default.
If the resource has no system-assigned but exactly one user-assigned
identity, the user-assigned identity will be used by default.

If the resource has multiple user-assigned identities you will need to
unset env_auth and set use_msi instead. See the use_msi section.

If you are operating in disconnected clouds, or private clouds such as
Azure Stack you may want to set disable_instance_discovery = true. This
determines whether rclone requests Microsoft Entra instance metadata
from https://login.microsoft.com/ before authenticating. Setting this to
true will skip this request, making you responsible for ensuring the
configured authority is valid and trustworthy.

Env Auth: 3. Azure CLI credentials (as used by the az tool)

Credentials created with the az tool can be picked up using env_auth.

For example if you were to login with a service principal like this:

    az login --service-principal -u XXX -p XXX --tenant XXX

Then you could access rclone resources like this:

    rclone lsf :azureblob,env_auth,account=ACCOUNT:CONTAINER

Or

    rclone lsf --azureblob-env-auth --azureblob-account=ACCOUNT :azureblob:CONTAINER

Which is analogous to using the az tool:

    az storage blob list --container-name CONTAINER --account-name ACCOUNT --auth-mode login

Account and Shared Key

This is the most straight forward and least flexible way. Just fill in
the account and key lines and leave the rest blank.

SAS URL

This can be an account level SAS URL or container level SAS URL.

To use it leave account and key blank and fill in sas_url.

An account level SAS URL or container level SAS URL can be obtained from
the Azure portal or the Azure Storage Explorer. To get a container level
SAS URL right click on a container in the Azure Blob explorer in the
Azure portal.

If you use a container level SAS URL, rclone operations are permitted
only on a particular container, e.g.

    rclone ls azureblob:container

You can also list the single container from the root. This will only
show the container specified by the SAS URL.

    $ rclone lsd azureblob:
    container/

Note that you can't see or access any other containers - this will fail

    rclone ls azureblob:othercontainer

Container level SAS URLs are useful for temporarily allowing third
parties access to a single container or putting credentials into an
untrusted environment such as a CI build server.

Service principal with client secret

If these variables are set, rclone will authenticate with a service
principal with a client secret.

-   tenant: ID of the service principal's tenant. Also called its
    "directory" ID.
-   client_id: the service principal's client ID
-   client_secret: one of the service principal's client secrets

The credentials can also be placed in a file using the
service_principal_file configuration option.

Service principal with certificate

If these variables are set, rclone will authenticate with a service
principal with certificate.

-   tenant: ID of the service principal's tenant. Also called its
    "directory" ID.
-   client_id: the service principal's client ID
-   client_certificate_path: path to a PEM or PKCS12 certificate file
    including the private key.
-   client_certificate_password: (optional) password for the certificate
    file.
-   client_send_certificate_chain: (optional) Specifies whether an
    authentication request will include an x5c header to support subject
    name / issuer based authentication. When set to "true" or "1",
    authentication requests include the x5c header.

NB client_certificate_password must be obscured - see rclone obscure.

User with username and password

If these variables are set, rclone will authenticate with username and
password.

-   tenant: (optional) tenant to authenticate in. Defaults to
    "organizations".
-   client_id: client ID of the application the user will authenticate
    to
-   username: a username (usually an email address)
-   password: the user's password

Microsoft doesn't recommend this kind of authentication, because it's
less secure than other authentication flows. This method is not
interactive, so it isn't compatible with any form of multi-factor
authentication, and the application must already have user or admin
consent. This credential can only authenticate work and school accounts;
it can't authenticate Microsoft accounts.

NB password must be obscured - see rclone obscure.

Managed Service Identity Credentials

If use_msi is set then managed service identity credentials are used.
This authentication only works when running in an Azure service.
env_auth needs to be unset to use this.

However if you have multiple user identities to choose from these must
be explicitly specified using exactly one of the msi_object_id,
msi_client_id, or msi_mi_res_id parameters.

If none of msi_object_id, msi_client_id, or msi_mi_res_id is set, this
is is equivalent to using env_auth.

Federated Identity Credentials

If these variables are set, rclone will authenticate with federated
identity.

-   tenant: tenant ID of of the storage
-   client_id: client ID of the application the user will authenticate
    to storage
-   msi_client_id: managed identity client ID of the application the
    user will authenticate to

By default "api://AzureADTokenExchange" is used as scope for token
retrieval over MSI. This token is then exchanged for actual storage
token using 'tenant' and 'client_id'.

Azure CLI tool az

Set to use the Azure CLI tool az as the sole means of authentication.

Setting this can be useful if you wish to use the az CLI on a host with
a System Managed Identity that you do not want to use.

Don't set env_auth at the same time.

Anonymous

If you want to access resources with public anonymous access then set
account only. You can do this without making an rclone config:

    rclone lsf :azureblob,account=ACCOUNT:CONTAINER

Standard options

Here are the Standard options specific to azureblob (Microsoft Azure
Blob Storage).

--azureblob-account

Azure Storage Account Name.

Set this to the Azure Storage Account Name in use.

Leave blank to use SAS URL or Emulator, otherwise it needs to be set.

If this is blank and if env_auth is set it will be read from the
environment variable AZURE_STORAGE_ACCOUNT_NAME if possible.

Properties:

-   Config: account
-   Env Var: RCLONE_AZUREBLOB_ACCOUNT
-   Type: string
-   Required: false

--azureblob-env-auth

Read credentials from runtime (environment variables, CLI or MSI).

See the authentication docs for full info.

Properties:

-   Config: env_auth
-   Env Var: RCLONE_AZUREBLOB_ENV_AUTH
-   Type: bool
-   Default: false

--azureblob-key

Storage Account Shared Key.

Leave blank to use SAS URL or Emulator.

Properties:

-   Config: key
-   Env Var: RCLONE_AZUREBLOB_KEY
-   Type: string
-   Required: false

--azureblob-sas-url

SAS URL for container level access only.

Leave blank if using account/key or Emulator.

Properties:

-   Config: sas_url
-   Env Var: RCLONE_AZUREBLOB_SAS_URL
-   Type: string
-   Required: false

--azureblob-connection-string

Storage Connection String.

Connection string for the storage. Leave blank if using other auth
methods.

Properties:

-   Config: connection_string
-   Env Var: RCLONE_AZUREBLOB_CONNECTION_STRING
-   Type: string
-   Required: false

--azureblob-tenant

ID of the service principal's tenant. Also called its directory ID.

Set this if using - Service principal with client secret - Service
principal with certificate - User with username and password

Properties:

-   Config: tenant
-   Env Var: RCLONE_AZUREBLOB_TENANT
-   Type: string
-   Required: false

--azureblob-client-id

The ID of the client in use.

Set this if using - Service principal with client secret - Service
principal with certificate - User with username and password

Properties:

-   Config: client_id
-   Env Var: RCLONE_AZUREBLOB_CLIENT_ID
-   Type: string
-   Required: false

--azureblob-client-secret

One of the service principal's client secrets

Set this if using - Service principal with client secret

Properties:

-   Config: client_secret
-   Env Var: RCLONE_AZUREBLOB_CLIENT_SECRET
-   Type: string
-   Required: false

--azureblob-client-certificate-path

Path to a PEM or PKCS12 certificate file including the private key.

Set this if using - Service principal with certificate

Properties:

-   Config: client_certificate_path
-   Env Var: RCLONE_AZUREBLOB_CLIENT_CERTIFICATE_PATH
-   Type: string
-   Required: false

--azureblob-client-certificate-password

Password for the certificate file (optional).

Optionally set this if using - Service principal with certificate

And the certificate has a password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: client_certificate_password
-   Env Var: RCLONE_AZUREBLOB_CLIENT_CERTIFICATE_PASSWORD
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to azureblob (Microsoft Azure
Blob Storage).

--azureblob-client-send-certificate-chain

Send the certificate chain when using certificate auth.

Specifies whether an authentication request will include an x5c header
to support subject name / issuer based authentication. When set to true,
authentication requests include the x5c header.

Optionally set this if using - Service principal with certificate

Properties:

-   Config: client_send_certificate_chain
-   Env Var: RCLONE_AZUREBLOB_CLIENT_SEND_CERTIFICATE_CHAIN
-   Type: bool
-   Default: false

--azureblob-username

User name (usually an email address)

Set this if using - User with username and password

Properties:

-   Config: username
-   Env Var: RCLONE_AZUREBLOB_USERNAME
-   Type: string
-   Required: false

--azureblob-password

The user's password

Set this if using - User with username and password

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_AZUREBLOB_PASSWORD
-   Type: string
-   Required: false

--azureblob-service-principal-file

Path to file containing credentials for use with a service principal.

Leave blank normally. Needed only if you want to use a service principal
instead of interactive login.

    $ az ad sp create-for-rbac --name "<name>" \
      --role "Storage Blob Data Owner" \
      --scopes "/subscriptions/<subscription>/resourceGroups/<resource-group>/providers/Microsoft.Storage/storageAccounts/<storage-account>/blobServices/default/containers/<container>" \
      > azure-principal.json

See "Create an Azure service principal" and "Assign an Azure role for
access to blob data" pages for more details.

It may be more convenient to put the credentials directly into the
rclone config file under the client_id, tenant and client_secret keys
instead of setting service_principal_file.

Properties:

-   Config: service_principal_file
-   Env Var: RCLONE_AZUREBLOB_SERVICE_PRINCIPAL_FILE
-   Type: string
-   Required: false

--azureblob-disable-instance-discovery

Skip requesting Microsoft Entra instance metadata

This should be set true only by applications authenticating in
disconnected clouds, or private clouds such as Azure Stack.

It determines whether rclone requests Microsoft Entra instance metadata
from https://login.microsoft.com/ before authenticating.

Setting this to true will skip this request, making you responsible for
ensuring the configured authority is valid and trustworthy.

Properties:

-   Config: disable_instance_discovery
-   Env Var: RCLONE_AZUREBLOB_DISABLE_INSTANCE_DISCOVERY
-   Type: bool
-   Default: false

--azureblob-use-msi

Use a managed service identity to authenticate (only works in Azure).

When true, use a managed service identity to authenticate to Azure
Storage instead of a SAS token or account key.

If the VM(SS) on which this program is running has a system-assigned
identity, it will be used by default. If the resource has no
system-assigned but exactly one user-assigned identity, the
user-assigned identity will be used by default. If the resource has
multiple user-assigned identities, the identity to use must be
explicitly specified using exactly one of the msi_object_id,
msi_client_id, or msi_mi_res_id parameters.

Properties:

-   Config: use_msi
-   Env Var: RCLONE_AZUREBLOB_USE_MSI
-   Type: bool
-   Default: false

--azureblob-msi-object-id

Object ID of the user-assigned MSI to use, if any.

Leave blank if msi_client_id or msi_mi_res_id specified.

Properties:

-   Config: msi_object_id
-   Env Var: RCLONE_AZUREBLOB_MSI_OBJECT_ID
-   Type: string
-   Required: false

--azureblob-msi-client-id

Object ID of the user-assigned MSI to use, if any.

Leave blank if msi_object_id or msi_mi_res_id specified.

Properties:

-   Config: msi_client_id
-   Env Var: RCLONE_AZUREBLOB_MSI_CLIENT_ID
-   Type: string
-   Required: false

--azureblob-msi-mi-res-id

Azure resource ID of the user-assigned MSI to use, if any.

Leave blank if msi_client_id or msi_object_id specified.

Properties:

-   Config: msi_mi_res_id
-   Env Var: RCLONE_AZUREBLOB_MSI_MI_RES_ID
-   Type: string
-   Required: false

--azureblob-use-emulator

Uses local storage emulator if provided as 'true'.

Leave blank if using real azure storage endpoint.

Properties:

-   Config: use_emulator
-   Env Var: RCLONE_AZUREBLOB_USE_EMULATOR
-   Type: bool
-   Default: false

--azureblob-use-az

Use Azure CLI tool az for authentication

Set to use the Azure CLI tool az as the sole means of authentication.

Setting this can be useful if you wish to use the az CLI on a host with
a System Managed Identity that you do not want to use.

Don't set env_auth at the same time.

Properties:

-   Config: use_az
-   Env Var: RCLONE_AZUREBLOB_USE_AZ
-   Type: bool
-   Default: false

--azureblob-endpoint

Endpoint for the service.

Leave blank normally.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_AZUREBLOB_ENDPOINT
-   Type: string
-   Required: false

--azureblob-upload-cutoff

Cutoff for switching to chunked upload (<= 256 MiB) (deprecated).

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_AZUREBLOB_UPLOAD_CUTOFF
-   Type: string
-   Required: false

--azureblob-chunk-size

Upload chunk size.

Note that this is stored in memory and there may be up to
"--transfers" * "--azureblob-upload-concurrency" chunks stored at once
in memory.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_AZUREBLOB_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 4Mi

--azureblob-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded
concurrently.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

In tests, upload speed increases almost linearly with upload
concurrency. For example to fill a gigabit pipe it may be necessary to
raise this to 64. Note that this will use more memory.

Note that chunks are stored in memory and there may be up to
"--transfers" * "--azureblob-upload-concurrency" chunks stored at once
in memory.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_AZUREBLOB_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 16

--azureblob-copy-cutoff

Cutoff for switching to multipart copy.

Any files larger than this that need to be server-side copied will be
copied in chunks of chunk_size using the put block list API.

Files smaller than this limit will be copied with the Copy Blob API.

Properties:

-   Config: copy_cutoff
-   Env Var: RCLONE_AZUREBLOB_COPY_CUTOFF
-   Type: SizeSuffix
-   Default: 8Mi

--azureblob-copy-concurrency

Concurrency for multipart copy.

This is the number of chunks of the same file that are copied
concurrently.

These chunks are not buffered in memory and Microsoft recommends setting
this value to greater than 1000 in the azcopy documentation.

https://learn.microsoft.com/en-us/azure/storage/common/storage-use-azcopy-optimize#increase-concurrency

In tests, copy speed increases almost linearly with copy concurrency.

Properties:

-   Config: copy_concurrency
-   Env Var: RCLONE_AZUREBLOB_COPY_CONCURRENCY
-   Type: int
-   Default: 512

--azureblob-copy-total-concurrency

Global concurrency limit for multipart copy chunks.

This limits the total number of multipart copy chunks running at once
across all files.

Set to 0 to disable this limiter.

Properties:

-   Config: copy_total_concurrency
-   Env Var: RCLONE_AZUREBLOB_COPY_TOTAL_CONCURRENCY
-   Type: int
-   Default: 0

--azureblob-use-copy-blob

Whether to use the Copy Blob API when copying to the same storage
account.

If true (the default) then rclone will use the Copy Blob API for copies
to the same storage account even when the size is above the copy_cutoff.

Rclone assumes that the same storage account means the same config and
does not check for the same storage account in different configs.

There should be no need to change this value.

Properties:

-   Config: use_copy_blob
-   Env Var: RCLONE_AZUREBLOB_USE_COPY_BLOB
-   Type: bool
-   Default: true

--azureblob-list-chunk

Size of blob list.

This sets the number of blobs requested in each listing chunk. Default
is the maximum, 5000. "List blobs" requests are permitted 2 minutes per
megabyte to complete. If an operation is taking longer than 2 minutes
per megabyte on average, it will time out ( source ). This can be used
to limit the number of blobs items to return, to avoid the time out.

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_AZUREBLOB_LIST_CHUNK
-   Type: int
-   Default: 5000

--azureblob-access-tier

Access tier of blob: hot, cool, cold or archive.

Archived blobs can be restored by setting access tier to hot, cool or
cold. Leave blank if you intend to use default access tier, which is set
at account level

If there is no "access tier" specified, rclone doesn't apply any tier.
rclone performs "Set Tier" operation on blobs while uploading, if
objects are not modified, specifying "access tier" to new one will have
no effect. If blobs are in "archive tier" at remote, trying to perform
data transfer operations from remote will not be allowed. User should
first restore by tiering blob to "Hot", "Cool" or "Cold".

Properties:

-   Config: access_tier
-   Env Var: RCLONE_AZUREBLOB_ACCESS_TIER
-   Type: string
-   Required: false

--azureblob-archive-tier-delete

Delete archive tier blobs before overwriting.

Archive tier blobs cannot be updated. So without this flag, if you
attempt to update an archive tier blob, then rclone will produce the
error:

    can't update archive tier blob without --azureblob-archive-tier-delete

With this flag set then before rclone attempts to overwrite an archive
tier blob, it will delete the existing blob before uploading its
replacement. This has the potential for data loss if the upload fails
(unlike updating a normal blob) and also may cost more since deleting
archive tier blobs early may be chargable.

Properties:

-   Config: archive_tier_delete
-   Env Var: RCLONE_AZUREBLOB_ARCHIVE_TIER_DELETE
-   Type: bool
-   Default: false

--azureblob-disable-checksum

Don't store MD5 checksum with object metadata.

Normally rclone will calculate the MD5 checksum of the input before
uploading it so it can add it to metadata on the object. This is great
for data integrity checking but can cause long delays for large files to
start uploading.

Properties:

-   Config: disable_checksum
-   Env Var: RCLONE_AZUREBLOB_DISABLE_CHECKSUM
-   Type: bool
-   Default: false

--azureblob-memory-pool-flush-time

How often internal memory buffer pools will be flushed. (no longer used)

Properties:

-   Config: memory_pool_flush_time
-   Env Var: RCLONE_AZUREBLOB_MEMORY_POOL_FLUSH_TIME
-   Type: Duration
-   Default: 1m0s

--azureblob-memory-pool-use-mmap

Whether to use mmap buffers in internal memory pool. (no longer used)

Properties:

-   Config: memory_pool_use_mmap
-   Env Var: RCLONE_AZUREBLOB_MEMORY_POOL_USE_MMAP
-   Type: bool
-   Default: false

--azureblob-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_AZUREBLOB_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8

--azureblob-public-access

Public access level of a container: blob or container.

Properties:

-   Config: public_access
-   Env Var: RCLONE_AZUREBLOB_PUBLIC_ACCESS
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   The container and its blobs can be accessed only with an
            authorized request.
        -   It's a default value.
    -   "blob"
        -   Blob data within this container can be read via anonymous
            request.
    -   "container"
        -   Allow full public read access for container and blob data.

--azureblob-directory-markers

Upload an empty object with a trailing slash when a new directory is
created

Empty folders are unsupported for bucket based remotes, this option
creates an empty object ending with "/", to persist the folder.

This object also has the metadata "hdi_isfolder = true" to conform to
the Microsoft standard.

Properties:

-   Config: directory_markers
-   Env Var: RCLONE_AZUREBLOB_DIRECTORY_MARKERS
-   Type: bool
-   Default: false

--azureblob-no-check-container

If set, don't attempt to check the container exists or create it.

This can be useful when trying to minimise the number of transactions
rclone does if you know the container exists already.

Properties:

-   Config: no_check_container
-   Env Var: RCLONE_AZUREBLOB_NO_CHECK_CONTAINER
-   Type: bool
-   Default: false

--azureblob-no-head-object

If set, do not do HEAD before GET when getting objects.

Properties:

-   Config: no_head_object
-   Env Var: RCLONE_AZUREBLOB_NO_HEAD_OBJECT
-   Type: bool
-   Default: false

--azureblob-delete-snapshots

Set to specify how to deal with snapshots on blob deletion.

Properties:

-   Config: delete_snapshots
-   Env Var: RCLONE_AZUREBLOB_DELETE_SNAPSHOTS
-   Type: string
-   Required: false
-   Choices:
    -   ""
        -   By default, the delete operation fails if a blob has
            snapshots
    -   "include"
        -   Specify 'include' to remove the root blob and all its
            snapshots
    -   "only"
        -   Specify 'only' to remove only the snapshots but keep the
            root blob.

--azureblob-decompress

If set this will decompress gzip encoded objects.

It is possible to upload objects to Azure Blob Storage with
"Content-Encoding: gzip" set. Normally rclone will download these files
as compressed objects.

If this flag is set then rclone will decompress these files with
"Content-Encoding: gzip" as they are received. This means that rclone
can't check the size and hash but the file contents will be
decompressed.

Properties:

-   Config: decompress
-   Env Var: RCLONE_AZUREBLOB_DECOMPRESS
-   Type: bool
-   Default: false

--azureblob-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_AZUREBLOB_DESCRIPTION
-   Type: string
-   Required: false

Metadata

User metadata is stored as x-ms-meta- keys. Azure metadata keys are case
insensitive and are always returned in lower case.

Here are the possible system metadata items for the azureblob backend.

  ------------------------------------------------------------------------------------------------------------------
  Name                  Help                  Type        Example                               Read Only
  --------------------- --------------------- ----------- ------------------------------------- --------------------
  cache-control         Cache-Control header  string      no-cache                              N

  content-disposition   Content-Disposition   string      inline                                N
                        header                                                                  

  content-encoding      Content-Encoding      string      gzip                                  N
                        header                                                                  

  content-language      Content-Language      string      en-US                                 N
                        header                                                                  

  content-type          Content-Type header   string      text/plain                            N

  mtime                 Time of last          RFC 3339    2006-01-02T15:04:05.999999999Z07:00   N
                        modification, read                                                      
                        from rclone metadata                                                    

  tier                  Tier of the object    string      Hot                                   Y
  ------------------------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Custom upload headers

You can set custom upload headers with the --header-upload flag.

-   Cache-Control
-   Content-Disposition
-   Content-Encoding
-   Content-Language
-   Content-Type
-   X-MS-Tags

Eg --header-upload "Content-Type: text/potato" or
--header-upload "X-MS-Tags: foo=bar".

Limitations

MD5 sums are only uploaded with chunked files if the source has an MD5
sum. This will always be the case for a local to azure copy.

rclone about is not supported by the Microsoft Azure Blob storage
backend. Backends without this capability cannot determine free space
for an rclone mount or use policy mfs (most free space) as a member of
an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Azure Storage Emulator Support

You can run rclone with the storage emulator (usually azurite).

To do this, just set up a new remote with rclone config following the
instructions in the introduction and set use_emulator in the advanced
settings as true. You do not need to provide a default account name nor
an account key. But you can override them in the account and key
options. (Prior to v1.61 they were hard coded to azurite's
devstoreaccount1.)

Also, if you want to access a storage emulator instance running on a
different machine, you can override the endpoint parameter in the
advanced settings, setting it to
http(s)://<host>:<port>/devstoreaccount1 (e.g.
http://10.254.2.5:10000/devstoreaccount1).

Microsoft Azure Files Storage

Paths are specified as remote: You may put subdirectories in too, e.g.
remote:path/to/dir.

Configuration

Here is an example of making a Microsoft Azure Files Storage
configuration. For a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Microsoft Azure Files Storage
       \ "azurefiles"
    [snip]

    Option account.
    Azure Storage Account Name.
    Set this to the Azure Storage Account Name in use.
    Leave blank to use SAS URL or connection string, otherwise it needs to be set.
    If this is blank and if env_auth is set it will be read from the
    environment variable `AZURE_STORAGE_ACCOUNT_NAME` if possible.
    Enter a value. Press Enter to leave empty.
    account> account_name

    Option share_name.
    Azure Files Share Name.
    This is required and is the name of the share to access.
    Enter a value. Press Enter to leave empty.
    share_name> share_name

    Option env_auth.
    Read credentials from runtime (environment variables, CLI or MSI).
    See the [authentication docs](/azurefiles#authentication) for full info.
    Enter a boolean value (true or false). Press Enter for the default (false).
    env_auth> 

    Option key.
    Storage Account Shared Key.
    Leave blank to use SAS URL or connection string.
    Enter a value. Press Enter to leave empty.
    key> base64encodedkey==

    Option sas_url.
    SAS URL.
    Leave blank if using account/key or connection string.
    Enter a value. Press Enter to leave empty.
    sas_url> 

    Option connection_string.
    Azure Files Connection String.
    Enter a value. Press Enter to leave empty.
    connection_string> 
    [snip]

    Configuration complete.
    Options:
    - type: azurefiles
    - account: account_name
    - share_name: share_name
    - key: base64encodedkey==
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> 

Once configured you can use rclone.

See all files in the top level:

    rclone lsf remote:

Make a new directory in the root:

    rclone mkdir remote:dir

Recursively List the contents:

    rclone ls remote:

Sync /home/local/directory to the remote directory, deleting any excess
files in the directory.

    rclone sync --interactive /home/local/directory remote:dir

Modified time

The modified time is stored as Azure standard LastModified time on files

Performance

When uploading large files, increasing the value of
--azurefiles-upload-concurrency will increase performance at the cost of
using more memory. The default of 16 is set quite conservatively to use
less memory. It maybe be necessary raise it to 64 or higher to fully
utilize a 1 GBit/s link with a single file transfer.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  "            0x22        ＂
  *            0x2A        ＊
  :            0x3A        ：
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  \            0x5C        ＼
  |            0x7C        ｜

File names can also not end with the following characters. These only
get replaced if they are the last character in the name:

  Character    Value   Replacement
  ----------- ------- -------------
  .            0x2E        ．

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Hashes

MD5 hashes are stored with files. Not all files will have MD5 hashes as
these have to be uploaded with the file.

Authentication

There are a number of ways of supplying credentials for Azure Files
Storage. Rclone tries them in the order of the sections below.

Env Auth

If the env_auth config parameter is true then rclone will pull
credentials from the environment or runtime.

It tries these authentication methods in this order:

1.  Environment Variables
2.  Managed Service Identity Credentials
3.  Azure CLI credentials (as used by the az tool)

These are described in the following sections

Env Auth: 1. Environment Variables

If env_auth is set and environment variables are present rclone
authenticates a service principal with a secret or certificate, or a
user with a password, depending on which environment variable are set.
It reads configuration from these variables, in the following order:

1.  Service principal with client secret
    -   AZURE_TENANT_ID: ID of the service principal's tenant. Also
        called its "directory" ID.
    -   AZURE_CLIENT_ID: the service principal's client ID
    -   AZURE_CLIENT_SECRET: one of the service principal's client
        secrets
2.  Service principal with certificate
    -   AZURE_TENANT_ID: ID of the service principal's tenant. Also
        called its "directory" ID.
    -   AZURE_CLIENT_ID: the service principal's client ID
    -   AZURE_CLIENT_CERTIFICATE_PATH: path to a PEM or PKCS12
        certificate file including the private key.
    -   AZURE_CLIENT_CERTIFICATE_PASSWORD: (optional) password for the
        certificate file.
    -   AZURE_CLIENT_SEND_CERTIFICATE_CHAIN: (optional) Specifies
        whether an authentication request will include an x5c header to
        support subject name / issuer based authentication. When set to
        "true" or "1", authentication requests include the x5c header.
3.  User with username and password
    -   AZURE_TENANT_ID: (optional) tenant to authenticate in. Defaults
        to "organizations".
    -   AZURE_CLIENT_ID: client ID of the application the user will
        authenticate to
    -   AZURE_USERNAME: a username (usually an email address)
    -   AZURE_PASSWORD: the user's password
4.  Workload Identity
    -   AZURE_TENANT_ID: Tenant to authenticate in
    -   AZURE_CLIENT_ID: Client ID of the application the user will
        authenticate to
    -   AZURE_FEDERATED_TOKEN_FILE: Path to projected service account
        token file
    -   AZURE_AUTHORITY_HOST: Authority of an Azure Active Directory
        endpoint (default: login.microsoftonline.com).

Env Auth: 2. Managed Service Identity Credentials

When using Managed Service Identity if the VM(SS) on which this program
is running has a system-assigned identity, it will be used by default.
If the resource has no system-assigned but exactly one user-assigned
identity, the user-assigned identity will be used by default.

If the resource has multiple user-assigned identities you will need to
unset env_auth and set use_msi instead. See the use_msi section.

If you are operating in disconnected clouds, or private clouds such as
Azure Stack you may want to set disable_instance_discovery = true. This
determines whether rclone requests Microsoft Entra instance metadata
from https://login.microsoft.com/ before authenticating. Setting this to
true will skip this request, making you responsible for ensuring the
configured authority is valid and trustworthy.

Env Auth: 3. Azure CLI credentials (as used by the az tool)

Credentials created with the az tool can be picked up using env_auth.

For example if you were to login with a service principal like this:

    az login --service-principal -u XXX -p XXX --tenant XXX

Then you could access rclone resources like this:

    rclone lsf :azurefiles,env_auth,account=ACCOUNT:

Or

    rclone lsf --azurefiles-env-auth --azurefiles-account=ACCOUNT :azurefiles:

Account and Shared Key

This is the most straight forward and least flexible way. Just fill in
the account and key lines and leave the rest blank.

SAS URL

To use it leave account, key and connection_string blank and fill in
sas_url.

Connection String

To use it leave account, key and "sas_url" blank and fill in
connection_string.

Service principal with client secret

If these variables are set, rclone will authenticate with a service
principal with a client secret.

-   tenant: ID of the service principal's tenant. Also called its
    "directory" ID.
-   client_id: the service principal's client ID
-   client_secret: one of the service principal's client secrets

The credentials can also be placed in a file using the
service_principal_file configuration option.

Service principal with certificate

If these variables are set, rclone will authenticate with a service
principal with certificate.

-   tenant: ID of the service principal's tenant. Also called its
    "directory" ID.
-   client_id: the service principal's client ID
-   client_certificate_path: path to a PEM or PKCS12 certificate file
    including the private key.
-   client_certificate_password: (optional) password for the certificate
    file.
-   client_send_certificate_chain: (optional) Specifies whether an
    authentication request will include an x5c header to support subject
    name / issuer based authentication. When set to "true" or "1",
    authentication requests include the x5c header.

NB client_certificate_password must be obscured - see rclone obscure.

User with username and password

If these variables are set, rclone will authenticate with username and
password.

-   tenant: (optional) tenant to authenticate in. Defaults to
    "organizations".
-   client_id: client ID of the application the user will authenticate
    to
-   username: a username (usually an email address)
-   password: the user's password

Microsoft doesn't recommend this kind of authentication, because it's
less secure than other authentication flows. This method is not
interactive, so it isn't compatible with any form of multi-factor
authentication, and the application must already have user or admin
consent. This credential can only authenticate work and school accounts;
it can't authenticate Microsoft accounts.

NB password must be obscured - see rclone obscure.

Managed Service Identity Credentials

If use_msi is set then managed service identity credentials are used.
This authentication only works when running in an Azure service.
env_auth needs to be unset to use this.

However if you have multiple user identities to choose from these must
be explicitly specified using exactly one of the msi_object_id,
msi_client_id, or msi_mi_res_id parameters.

If none of msi_object_id, msi_client_id, or msi_mi_res_id is set, this
is is equivalent to using env_auth.

Federated Identity Credentials

If these variables are set, rclone will authenticate with federated
identity.

-   tenant: tenant ID of of the storage
-   client_id: client ID of the application the user will authenticate
    to storage
-   msi_client_id: managed identity client ID of the application the
    user will authenticate to

By default "api://AzureADTokenExchange" is used as scope for token
retrieval over MSI. This token is then exchanged for actual storage
token using 'tenant' and 'client_id'.

Azure CLI tool az

Set to use the Azure CLI tool az as the sole means of authentication.
Setting this can be useful if you wish to use the az CLI on a host with
a System Managed Identity that you do not want to use. Don't set
env_auth at the same time.

Standard options

Here are the Standard options specific to azurefiles (Microsoft Azure
Files).

--azurefiles-account

Azure Storage Account Name.

Set this to the Azure Storage Account Name in use.

Leave blank to use SAS URL or Emulator, otherwise it needs to be set.

If this is blank and if env_auth is set it will be read from the
environment variable AZURE_STORAGE_ACCOUNT_NAME if possible.

Properties:

-   Config: account
-   Env Var: RCLONE_AZUREFILES_ACCOUNT
-   Type: string
-   Required: false

--azurefiles-env-auth

Read credentials from runtime (environment variables, CLI or MSI).

See the authentication docs for full info.

Properties:

-   Config: env_auth
-   Env Var: RCLONE_AZUREFILES_ENV_AUTH
-   Type: bool
-   Default: false

--azurefiles-key

Storage Account Shared Key.

Leave blank to use SAS URL or Emulator.

Properties:

-   Config: key
-   Env Var: RCLONE_AZUREFILES_KEY
-   Type: string
-   Required: false

--azurefiles-sas-url

SAS URL for container level access only.

Leave blank if using account/key or Emulator.

Properties:

-   Config: sas_url
-   Env Var: RCLONE_AZUREFILES_SAS_URL
-   Type: string
-   Required: false

--azurefiles-connection-string

Storage Connection String.

Connection string for the storage. Leave blank if using other auth
methods.

Properties:

-   Config: connection_string
-   Env Var: RCLONE_AZUREFILES_CONNECTION_STRING
-   Type: string
-   Required: false

--azurefiles-tenant

ID of the service principal's tenant. Also called its directory ID.

Set this if using - Service principal with client secret - Service
principal with certificate - User with username and password

Properties:

-   Config: tenant
-   Env Var: RCLONE_AZUREFILES_TENANT
-   Type: string
-   Required: false

--azurefiles-client-id

The ID of the client in use.

Set this if using - Service principal with client secret - Service
principal with certificate - User with username and password

Properties:

-   Config: client_id
-   Env Var: RCLONE_AZUREFILES_CLIENT_ID
-   Type: string
-   Required: false

--azurefiles-client-secret

One of the service principal's client secrets

Set this if using - Service principal with client secret

Properties:

-   Config: client_secret
-   Env Var: RCLONE_AZUREFILES_CLIENT_SECRET
-   Type: string
-   Required: false

--azurefiles-client-certificate-path

Path to a PEM or PKCS12 certificate file including the private key.

Set this if using - Service principal with certificate

Properties:

-   Config: client_certificate_path
-   Env Var: RCLONE_AZUREFILES_CLIENT_CERTIFICATE_PATH
-   Type: string
-   Required: false

--azurefiles-client-certificate-password

Password for the certificate file (optional).

Optionally set this if using - Service principal with certificate

And the certificate has a password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: client_certificate_password
-   Env Var: RCLONE_AZUREFILES_CLIENT_CERTIFICATE_PASSWORD
-   Type: string
-   Required: false

--azurefiles-share-name

Azure Files Share Name.

This is required and is the name of the share to access.

Properties:

-   Config: share_name
-   Env Var: RCLONE_AZUREFILES_SHARE_NAME
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to azurefiles (Microsoft Azure
Files).

--azurefiles-client-send-certificate-chain

Send the certificate chain when using certificate auth.

Specifies whether an authentication request will include an x5c header
to support subject name / issuer based authentication. When set to true,
authentication requests include the x5c header.

Optionally set this if using - Service principal with certificate

Properties:

-   Config: client_send_certificate_chain
-   Env Var: RCLONE_AZUREFILES_CLIENT_SEND_CERTIFICATE_CHAIN
-   Type: bool
-   Default: false

--azurefiles-username

User name (usually an email address)

Set this if using - User with username and password

Properties:

-   Config: username
-   Env Var: RCLONE_AZUREFILES_USERNAME
-   Type: string
-   Required: false

--azurefiles-password

The user's password

Set this if using - User with username and password

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_AZUREFILES_PASSWORD
-   Type: string
-   Required: false

--azurefiles-service-principal-file

Path to file containing credentials for use with a service principal.

Leave blank normally. Needed only if you want to use a service principal
instead of interactive login.

    $ az ad sp create-for-rbac --name "<name>" \
      --role "Storage Blob Data Owner" \
      --scopes "/subscriptions/<subscription>/resourceGroups/<resource-group>/providers/Microsoft.Storage/storageAccounts/<storage-account>/blobServices/default/containers/<container>" \
      > azure-principal.json

See "Create an Azure service principal" and "Assign an Azure role for
access to blob data" pages for more details.

It may be more convenient to put the credentials directly into the
rclone config file under the client_id, tenant and client_secret keys
instead of setting service_principal_file.

Properties:

-   Config: service_principal_file
-   Env Var: RCLONE_AZUREFILES_SERVICE_PRINCIPAL_FILE
-   Type: string
-   Required: false

--azurefiles-disable-instance-discovery

Skip requesting Microsoft Entra instance metadata

This should be set true only by applications authenticating in
disconnected clouds, or private clouds such as Azure Stack.

It determines whether rclone requests Microsoft Entra instance metadata
from https://login.microsoft.com/ before authenticating.

Setting this to true will skip this request, making you responsible for
ensuring the configured authority is valid and trustworthy.

Properties:

-   Config: disable_instance_discovery
-   Env Var: RCLONE_AZUREFILES_DISABLE_INSTANCE_DISCOVERY
-   Type: bool
-   Default: false

--azurefiles-use-msi

Use a managed service identity to authenticate (only works in Azure).

When true, use a managed service identity to authenticate to Azure
Storage instead of a SAS token or account key.

If the VM(SS) on which this program is running has a system-assigned
identity, it will be used by default. If the resource has no
system-assigned but exactly one user-assigned identity, the
user-assigned identity will be used by default. If the resource has
multiple user-assigned identities, the identity to use must be
explicitly specified using exactly one of the msi_object_id,
msi_client_id, or msi_mi_res_id parameters.

Properties:

-   Config: use_msi
-   Env Var: RCLONE_AZUREFILES_USE_MSI
-   Type: bool
-   Default: false

--azurefiles-msi-object-id

Object ID of the user-assigned MSI to use, if any.

Leave blank if msi_client_id or msi_mi_res_id specified.

Properties:

-   Config: msi_object_id
-   Env Var: RCLONE_AZUREFILES_MSI_OBJECT_ID
-   Type: string
-   Required: false

--azurefiles-msi-client-id

Object ID of the user-assigned MSI to use, if any.

Leave blank if msi_object_id or msi_mi_res_id specified.

Properties:

-   Config: msi_client_id
-   Env Var: RCLONE_AZUREFILES_MSI_CLIENT_ID
-   Type: string
-   Required: false

--azurefiles-msi-mi-res-id

Azure resource ID of the user-assigned MSI to use, if any.

Leave blank if msi_client_id or msi_object_id specified.

Properties:

-   Config: msi_mi_res_id
-   Env Var: RCLONE_AZUREFILES_MSI_MI_RES_ID
-   Type: string
-   Required: false

--azurefiles-use-emulator

Uses local storage emulator if provided as 'true'.

Leave blank if using real azure storage endpoint.

Properties:

-   Config: use_emulator
-   Env Var: RCLONE_AZUREFILES_USE_EMULATOR
-   Type: bool
-   Default: false

--azurefiles-use-az

Use Azure CLI tool az for authentication

Set to use the Azure CLI tool az as the sole means of authentication.

Setting this can be useful if you wish to use the az CLI on a host with
a System Managed Identity that you do not want to use.

Don't set env_auth at the same time.

Properties:

-   Config: use_az
-   Env Var: RCLONE_AZUREFILES_USE_AZ
-   Type: bool
-   Default: false

--azurefiles-endpoint

Endpoint for the service.

Leave blank normally.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_AZUREFILES_ENDPOINT
-   Type: string
-   Required: false

--azurefiles-chunk-size

Upload chunk size.

Note that this is stored in memory and there may be up to
"--transfers" * "--azurefile-upload-concurrency" chunks stored at once
in memory.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_AZUREFILES_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 4Mi

--azurefiles-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded
concurrently.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Note that chunks are stored in memory and there may be up to
"--transfers" * "--azurefile-upload-concurrency" chunks stored at once
in memory.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_AZUREFILES_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 16

--azurefiles-max-stream-size

Max size for streamed files.

Azure files needs to know in advance how big the file will be. When
rclone doesn't know it uses this value instead.

This will be used when rclone is streaming data, the most common uses
are:

-   Uploading files with --vfs-cache-mode off with rclone mount
-   Using rclone rcat
-   Copying files with unknown length

You will need this much free space in the share as the file will be this
size temporarily.

Properties:

-   Config: max_stream_size
-   Env Var: RCLONE_AZUREFILES_MAX_STREAM_SIZE
-   Type: SizeSuffix
-   Default: 10Gi

--azurefiles-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_AZUREFILES_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8,Dot

--azurefiles-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_AZUREFILES_DESCRIPTION
-   Type: string
-   Required: false

Custom upload headers

You can set custom upload headers with the --header-upload flag.

-   Cache-Control
-   Content-Disposition
-   Content-Encoding
-   Content-Language
-   Content-Type

Eg --header-upload "Content-Type: text/potato"

Limitations

MD5 sums are only uploaded with chunked files if the source has an MD5
sum. This will always be the case for a local to azure copy.

Microsoft OneDrive

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

The initial setup for OneDrive involves getting a token from Microsoft
which you need to do in your browser. rclone config walks you through
it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Microsoft OneDrive
       \ "onedrive"
    [snip]
    Storage> onedrive
    Microsoft App Client Id
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    client_id>
    Microsoft App Client Secret
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    client_secret>
    Edit advanced config? (y/n)
    y) Yes
    n) No
    y/n> n
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Choose a number from below, or type in an existing value
     1 / OneDrive Personal or Business
       \ "onedrive"
     2 / Sharepoint site
       \ "sharepoint"
     3 / Type in driveID
       \ "driveid"
     4 / Type in SiteID
       \ "siteid"
     5 / Search a Sharepoint site
       \ "search"
    Your choice> 1
    Found 1 drives, please select the one you want to use:
    0: OneDrive (business) id=b!Eqwertyuiopasdfghjklzxcvbnm-7mnbvcxzlkjhgfdsapoiuytrewqk
    Chose drive to use:> 0
    Found drive 'root' of type 'business', URL: https://org-my.sharepoint.com/personal/you/Documents
    Is that okay?
    y) Yes
    n) No
    y/n> y
    Configuration complete.
    Options:
    - type: onedrive
    - token: {"access_token":"youraccesstoken","token_type":"Bearer","refresh_token":"yourrefreshtoken","expiry":"2018-08-26T22:39:52.486512262+08:00"}
    - drive_id: b!Eqwertyuiopasdfghjklzxcvbnm-7mnbvcxzlkjhgfdsapoiuytrewqk
    - drive_type: business
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Microsoft. This only runs from the moment it
opens your browser to the moment you get back the verification code.
This is on http://127.0.0.1:53682/ and this it may require you to
unblock it temporarily if you are running a host firewall.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your OneDrive

    rclone lsd remote:

List all the files in your OneDrive

    rclone ls remote:

To copy a local directory to an OneDrive directory called backup

    rclone copy /home/source remote:backup

Getting your own Client ID and Key

rclone uses a default Client ID when talking to OneDrive, unless a
custom client_id is specified in the config. The default Client ID and
Key are shared by all rclone users when performing requests.

You may choose to create and use your own Client ID, in case the default
one does not work well for you. For example, you might see throttling.

Creating Client ID for OneDrive Personal

To create your own Client ID, please follow these steps:

1.  Open
    https://portal.azure.com/?quickstart=true#view/Microsoft_AAD_IAM/ActiveDirectoryMenuBlade/~/Overview
    and then under the Add menu click App registration.
    -   If you have not created an Azure account, you will be prompted
        to. This is free, but you need to provide a phone number,
        address, and credit card for identity verification.
2.  Enter a name for your app, choose account type
    Accounts in any organizational    directory (Any Azure AD directory - Multitenant) and personal Microsoft accounts    (e.g. Skype, Xbox),
    select Web in Redirect URI, then type (do not copy and paste)
    http://localhost:53682/ and click Register. Copy and keep the
    Application (client) ID under the app name for later use.
3.  Under manage select Certificates & secrets, click New client secret.
    Enter a description (can be anything) and set Expires to 24 months.
    Copy and keep that secret Value for later use (you won't be able to
    see this value afterwards).
4.  Under manage select API permissions, click Add a permission and
    select Microsoft Graph then select delegated permissions.
5.  Search and select the following permissions: Files.Read,
    Files.ReadWrite, Files.Read.All, Files.ReadWrite.All,
    offline_access, User.Read and Sites.Read.All (if custom access
    scopes are configured, select the permissions accordingly). Once
    selected click Add permissions at the bottom.

Now the application is complete. Run rclone config to create or edit a
OneDrive remote. Supply the app ID and password as Client ID and Secret,
respectively. rclone will walk you through the remaining steps.

The access_scopes option allows you to configure the permissions
requested by rclone. See Microsoft Docs for more information about the
different scopes.

The Sites.Read.All permission is required if you need to search
SharePoint sites when configuring the remote. However, if that
permission is not assigned, you need to exclude Sites.Read.All from your
access scopes or set disable_site_permission option to true in the
advanced options.

Creating Client ID for OneDrive Business

The steps for OneDrive Personal may or may not work for OneDrive
Business, depending on the security settings of the organization. A
common error is that the publisher of the App is not verified.

You may try to verify you account, or try to limit the App to your
organization only, as shown below.

1.  Make sure to create the App with your business account.
2.  Follow the steps above to create an App. However, we need a
    different account type here:
    Accounts in this organizational directory only (*** - Single tenant).
    Note that you can also change the account type after creating the
    App.
3.  Find the tenant ID of your organization.
4.  In the rclone config, set auth_url to
    https://login.microsoftonline.com/YOUR_TENANT_ID/oauth2/v2.0/authorize.
5.  In the rclone config, set token_url to
    https://login.microsoftonline.com/YOUR_TENANT_ID/oauth2/v2.0/token.

Note: If you have a special region, you may need a different host in
step 4 and 5. Here are some hints.

Using OAuth Client Credential flow

OAuth Client Credential flow will allow rclone to use permissions
directly associated with the Azure AD Enterprise application, rather
that adopting the context of an Azure AD user account.

This flow can be enabled by following the steps below:

1.  Create the Enterprise App registration in the Azure AD portal and
    obtain a Client ID and Client Secret as described above.
2.  Ensure that the application has the appropriate permissions and they
    are assigned as Application Permissions
3.  Configure the remote, ensuring that Client ID and Client Secret are
    entered correctly.
4.  In the Advanced Config section, enter true for client_credentials
    and in the tenant section enter the tenant ID.

When it comes to choosing the type of the connection work with the
client credentials flow. In particular the "onedrive" option does not
work. You can use the "sharepoint" option or if that does not find the
correct drive ID type it in manually with the "driveid" option.

To back up any user's data using this flow, grant your Azure AD
application the necessary Microsoft Graph Application permissions (such
as Files.Read.All, Sites.Read.All and/or Sites.Selected). With these
permissions, rclone can access drives across the tenant, but it needs to
know which user or drive you want. Supply a specific drive_id
corresponding to that user's OneDrive, or a SharePoint site ID for
SharePoint libraries. You can obtain a user's drive ID using Microsoft
Graph (e.g. /users/{userUPN}/drive) and then configure it in rclone.
Once the correct drive ID is provided, rclone will back up that user's
data using the app-only token without requiring their credentials.

NOTE Assigning permissions directly to the application means that anyone
with the Client ID and Client Secret can access your OneDrive files.
Take care to safeguard these credentials.

Modification times and hashes

OneDrive allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not.

OneDrive Personal, OneDrive for Business and Sharepoint Server support
QuickXorHash.

Before rclone 1.62 the default hash for Onedrive Personal was SHA1. For
rclone 1.62 and above the default for all Onedrive backends is
QuickXorHash.

Starting from July 2023 SHA1 support is being phased out in Onedrive
Personal in favour of QuickXorHash. If necessary the
--onedrive-hash-type flag (or hash_type config option) can be used to
select SHA1 during the transition period if this is important your
workflow.

For all types of OneDrive you can use the --checksum flag.

--fast-list

This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

This must be enabled with the --onedrive-delta flag (or delta = true in
the config file) as it can cause performance degradation.

It does this by using the delta listing facilities of OneDrive which
returns all the files in the remote very efficiently. This is much more
efficient than listing directories recursively and is Microsoft's
recommended way of reading all the file information from a drive.

This can be useful with rclone mount and rclone rc vfs/refresh
recursive=true) to very quickly fill the mount with information about
all the files.

The API used for the recursive listing (ListR) only supports listing
from the root of the drive. This will become increasingly inefficient
the further away you get from the root as rclone will have to discard
files outside of the directory you are using.

Some commands (like rclone lsf -R) will use ListR by default - you can
turn this off with --disable ListR if you need to.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  "            0x22        ＂
  *            0x2A        ＊
  :            0x3A        ：
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  \            0x5C        ＼
  |            0x7C        ｜

File names can also not end with the following characters. These only
get replaced if they are the last character in the name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠
  .            0x2E        ．

File names can also not begin with the following characters. These only
get replaced if they are the first character in the name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠
  ~            0x7E        ～

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Deleting files

Any files you delete with rclone will end up in the trash. Microsoft
doesn't provide an API to permanently delete files, nor to empty the
trash, so you will have to do that with one of Microsoft's apps or via
the OneDrive website.

Standard options

Here are the Standard options specific to onedrive (Microsoft OneDrive).

--onedrive-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_ONEDRIVE_CLIENT_ID
-   Type: string
-   Required: false

--onedrive-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_ONEDRIVE_CLIENT_SECRET
-   Type: string
-   Required: false

--onedrive-region

Choose national cloud region for OneDrive.

Properties:

-   Config: region
-   Env Var: RCLONE_ONEDRIVE_REGION
-   Type: string
-   Default: "global"
-   Examples:
    -   "global"
        -   Microsoft Cloud Global
    -   "us"
        -   Microsoft Cloud for US Government
    -   "de"
        -   Microsoft Cloud Germany (deprecated - try global region
            first).
    -   "cn"
        -   Azure and Office 365 operated by Vnet Group in China

--onedrive-tenant

ID of the service principal's tenant. Also called its directory ID.

Set this if using - Client Credential flow

Properties:

-   Config: tenant
-   Env Var: RCLONE_ONEDRIVE_TENANT
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to onedrive (Microsoft OneDrive).

--onedrive-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_ONEDRIVE_TOKEN
-   Type: string
-   Required: false

--onedrive-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_ONEDRIVE_AUTH_URL
-   Type: string
-   Required: false

--onedrive-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_ONEDRIVE_TOKEN_URL
-   Type: string
-   Required: false

--onedrive-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_ONEDRIVE_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--onedrive-upload-cutoff

Cutoff for switching to chunked upload.

Any files larger than this will be uploaded in chunks of chunk_size.

This is disabled by default as uploading using single part uploads
causes rclone to use twice the storage on Onedrive business as when
rclone sets the modification time after the upload Onedrive creates a
new version.

See: https://github.com/rclone/rclone/issues/1716

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_ONEDRIVE_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: off

--onedrive-chunk-size

Chunk size to upload files with - must be multiple of 320k (327,680
bytes).

Above this size files will be chunked - must be multiple of 320k
(327,680 bytes) and should not exceed 250M (262,144,000 bytes) else you
may encounter "Microsoft.SharePoint.Client.InvalidClientQueryException:
The request message is too big." Note that the chunks will be buffered
into memory.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_ONEDRIVE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 10Mi

--onedrive-drive-id

The ID of the drive to use.

Properties:

-   Config: drive_id
-   Env Var: RCLONE_ONEDRIVE_DRIVE_ID
-   Type: string
-   Required: false

--onedrive-drive-type

The type of the drive (personal | business | documentLibrary).

Properties:

-   Config: drive_type
-   Env Var: RCLONE_ONEDRIVE_DRIVE_TYPE
-   Type: string
-   Required: false

--onedrive-root-folder-id

ID of the root folder.

This isn't normally needed, but in special circumstances you might know
the folder ID that you wish to access but not be able to get there
through a path traversal.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_ONEDRIVE_ROOT_FOLDER_ID
-   Type: string
-   Required: false

--onedrive-access-scopes

Set scopes to be requested by rclone.

Choose or manually enter a custom space separated list with all scopes,
that rclone should request.

Properties:

-   Config: access_scopes
-   Env Var: RCLONE_ONEDRIVE_ACCESS_SCOPES
-   Type: SpaceSepList
-   Default: Files.Read Files.ReadWrite Files.Read.All
    Files.ReadWrite.All Sites.Read.All offline_access
-   Examples:
    -   "Files.Read Files.ReadWrite Files.Read.All Files.ReadWrite.All
        Sites.Read.All offline_access"
        -   Read and write access to all resources
    -   "Files.Read Files.Read.All Sites.Read.All offline_access"
        -   Read only access to all resources
    -   "Files.Read Files.ReadWrite Files.Read.All Files.ReadWrite.All
        offline_access"
        -   Read and write access to all resources, without the ability
            to browse SharePoint sites.
        -   Same as if disable_site_permission was set to true

--onedrive-disable-site-permission

Disable the request for Sites.Read.All permission.

If set to true, you will no longer be able to search for a SharePoint
site when configuring drive ID, because rclone will not request
Sites.Read.All permission. Set it to true if your organization didn't
assign Sites.Read.All permission to the application, and your
organization disallows users to consent app permission request on their
own.

Properties:

-   Config: disable_site_permission
-   Env Var: RCLONE_ONEDRIVE_DISABLE_SITE_PERMISSION
-   Type: bool
-   Default: false

--onedrive-expose-onenote-files

Set to make OneNote files show up in directory listings.

By default, rclone will hide OneNote files in directory listings because
operations like "Open" and "Update" won't work on them. But this
behaviour may also prevent you from deleting them. If you want to delete
OneNote files or otherwise want them to show up in directory listing,
set this option.

Properties:

-   Config: expose_onenote_files
-   Env Var: RCLONE_ONEDRIVE_EXPOSE_ONENOTE_FILES
-   Type: bool
-   Default: false

--onedrive-server-side-across-configs

Deprecated: use --server-side-across-configs instead.

Allow server-side operations (e.g. copy) to work across different
onedrive configs.

This will work if you are copying between two OneDrive Personal drives
AND the files to copy are already shared between them. Additionally, it
should also function for a user who has access permissions both between
Onedrive for business and SharePoint under the same tenant, and between
SharePoint and another SharePoint under the same tenant. In other cases,
rclone will fall back to normal copy (which will be slightly slower).

Properties:

-   Config: server_side_across_configs
-   Env Var: RCLONE_ONEDRIVE_SERVER_SIDE_ACROSS_CONFIGS
-   Type: bool
-   Default: false

--onedrive-list-chunk

Size of listing chunk.

Properties:

-   Config: list_chunk
-   Env Var: RCLONE_ONEDRIVE_LIST_CHUNK
-   Type: int
-   Default: 1000

--onedrive-no-versions

Remove all versions on modifying operations.

Onedrive for business creates versions when rclone uploads new files
overwriting an existing one and when it sets the modification time.

These versions take up space out of the quota.

This flag checks for versions after file upload and setting modification
time and removes all but the last version.

NB Onedrive personal can't currently delete versions so don't use this
flag there.

Properties:

-   Config: no_versions
-   Env Var: RCLONE_ONEDRIVE_NO_VERSIONS
-   Type: bool
-   Default: false

--onedrive-hard-delete

Permanently delete files on removal.

Normally files will get sent to the recycle bin on deletion. Setting
this flag causes them to be permanently deleted. Use with care.

OneDrive personal accounts do not support the permanentDelete API, it
only applies to OneDrive for Business and SharePoint document libraries.

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_ONEDRIVE_HARD_DELETE
-   Type: bool
-   Default: false

--onedrive-link-scope

Set the scope of the links created by the link command.

Properties:

-   Config: link_scope
-   Env Var: RCLONE_ONEDRIVE_LINK_SCOPE
-   Type: string
-   Default: "anonymous"
-   Examples:
    -   "anonymous"
        -   Anyone with the link has access, without needing to sign in.
        -   This may include people outside of your organization.
        -   Anonymous link support may be disabled by an administrator.
    -   "organization"
        -   Anyone signed into your organization (tenant) can use the
            link to get access.
        -   Only available in OneDrive for Business and SharePoint.

--onedrive-link-type

Set the type of the links created by the link command.

Properties:

-   Config: link_type
-   Env Var: RCLONE_ONEDRIVE_LINK_TYPE
-   Type: string
-   Default: "view"
-   Examples:
    -   "view"
        -   Creates a read-only link to the item.
    -   "edit"
        -   Creates a read-write link to the item.
    -   "embed"
        -   Creates an embeddable link to the item.

--onedrive-link-password

Set the password for links created by the link command.

At the time of writing this only works with OneDrive personal paid
accounts.

Properties:

-   Config: link_password
-   Env Var: RCLONE_ONEDRIVE_LINK_PASSWORD
-   Type: string
-   Required: false

--onedrive-hash-type

Specify the hash in use for the backend.

This specifies the hash type in use. If set to "auto" it will use the
default hash which is QuickXorHash.

Before rclone 1.62 an SHA1 hash was used by default for Onedrive
Personal. For 1.62 and later the default is to use a QuickXorHash for
all onedrive types. If an SHA1 hash is desired then set this option
accordingly.

From July 2023 QuickXorHash will be the only available hash for both
OneDrive for Business and OneDrive Personal.

This can be set to "none" to not use any hashes.

If the hash requested does not exist on the object, it will be returned
as an empty string which is treated as a missing hash by rclone.

Properties:

-   Config: hash_type
-   Env Var: RCLONE_ONEDRIVE_HASH_TYPE
-   Type: string
-   Default: "auto"
-   Examples:
    -   "auto"
        -   Rclone chooses the best hash
    -   "quickxor"
        -   QuickXor
    -   "sha1"
        -   SHA1
    -   "sha256"
        -   SHA256
    -   "crc32"
        -   CRC32
    -   "none"
        -   None - don't use any hashes

--onedrive-av-override

Allows download of files the server thinks has a virus.

The onedrive/sharepoint server may check files uploaded with an Anti
Virus checker. If it detects any potential viruses or malware it will
block download of the file.

In this case you will see a message like this

    server reports this file is infected with a virus - use --onedrive-av-override to download anyway: Infected (name of virus): 403 Forbidden: 

If you are 100% sure you want to download this file anyway then use the
--onedrive-av-override flag, or av_override = true in the config file.

Properties:

-   Config: av_override
-   Env Var: RCLONE_ONEDRIVE_AV_OVERRIDE
-   Type: bool
-   Default: false

--onedrive-delta

If set rclone will use delta listing to implement recursive listings.

If this flag is set the onedrive backend will advertise ListR support
for recursive listings.

Setting this flag speeds up these things greatly:

    rclone lsf -R onedrive:
    rclone size onedrive:
    rclone rc vfs/refresh recursive=true

However the delta listing API only works at the root of the drive. If
you use it not at the root then it recurses from the root and discards
all the data that is not under the directory you asked for. So it will
be correct but may not be very efficient.

This is why this flag is not set as the default.

As a rule of thumb if nearly all of your data is under rclone's root
directory (the root/directory in onedrive:root/directory) then using
this flag will be a big performance win. If your data is mostly not
under the root then using this flag will be a big performance loss.

It is recommended if you are mounting your onedrive at the root (or near
the root when using crypt) and using rclone rc vfs/refresh.

Properties:

-   Config: delta
-   Env Var: RCLONE_ONEDRIVE_DELTA
-   Type: bool
-   Default: false

--onedrive-metadata-permissions

Control whether permissions should be read or written in metadata.

Reading permissions metadata from files can be done quickly, but it
isn't always desirable to set the permissions from the metadata.

Properties:

-   Config: metadata_permissions
-   Env Var: RCLONE_ONEDRIVE_METADATA_PERMISSIONS
-   Type: Bits
-   Default: off
-   Examples:
    -   "off"
        -   Do not read or write the value
    -   "read"
        -   Read the value only
    -   "write"
        -   Write the value only
    -   "read,write"
        -   Read and Write the value.
    -   "failok"
        -   If writing fails log errors only, don't fail the transfer

--onedrive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_ONEDRIVE_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,LeftSpace,LeftTilde,RightSpace,RightPeriod,InvalidUtf8,Dot

--onedrive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_ONEDRIVE_DESCRIPTION
-   Type: string
-   Required: false

Metadata

OneDrive supports System Metadata (not User Metadata, as of this
writing) for both files and directories. Much of the metadata is
read-only, and there are some differences between OneDrive Personal and
Business (see table below for details).

Permissions are also supported, if --onedrive-metadata-permissions is
set. The accepted values for --onedrive-metadata-permissions are "read",
"write", "read,write", and "off" (the default). "write" supports adding
new permissions, updating the "role" of existing permissions, and
removing permissions. Updating and removing require the Permission ID to
be known, so it is recommended to use "read,write" instead of "write" if
you wish to update/remove permissions.

Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and
Business.

Example for OneDrive Personal:

    [
        {
            "id": "1234567890ABC!123",
            "grantedTo": {
                "user": {
                    "id": "ryan@contoso.com"
                },
                "application": {},
                "device": {}
            },
            "invitation": {
                "email": "ryan@contoso.com"
            },
            "link": {
                "webUrl": "https://1drv.ms/t/s!1234567890ABC"
            },
            "roles": [
                "read"
            ],
            "shareId": "s!1234567890ABC"
        }
    ]

Example for OneDrive Business:

    [
        {
            "id": "48d31887-5fad-4d73-a9f5-3c356e68a038",
            "grantedToIdentities": [
                {
                    "user": {
                        "displayName": "ryan@contoso.com"
                    },
                    "application": {},
                    "device": {}
                }
            ],
            "link": {
                "type": "view",
                "scope": "users",
                "webUrl": "https://contoso.sharepoint.com/:w:/t/design/a577ghg9hgh737613bmbjf839026561fmzhsr85ng9f3hjck2t5s"
            },
            "roles": [
                "read"
            ],
            "shareId": "u!LKj1lkdlals90j1nlkascl"
        },
        {
            "id": "5D33DD65C6932946",
            "grantedTo": {
                "user": {
                    "displayName": "John Doe",
                    "id": "efee1b77-fb3b-4f65-99d6-274c11914d12"
                },
                "application": {},
                "device": {}
            },
            "roles": [
                "owner"
            ],
            "shareId": "FWxc1lasfdbEAGM5fI7B67aB5ZMPDMmQ11U"
        }
    ]

To write permissions, pass in a "permissions" metadata key using this
same format. The --metadata-mapper tool can be very helpful for this.

When adding permissions, an email address can be provided in the User.ID
or DisplayName properties of grantedTo or grantedToIdentities.
Alternatively, an ObjectID can be provided in User.ID. At least one
valid recipient must be provided in order to add a permission for a
user. Creating a Public Link is also supported, if Link.Scope is set to
"anonymous".

Example request to add a "read" permission with --metadata-mapper:

    {
        "Metadata": {
            "permissions": "[{\"grantedToIdentities\":[{\"user\":{\"id\":\"ryan@contoso.com\"}}],\"roles\":[\"read\"]}]"
        }
    }

Note that adding a permission can fail if a conflicting permission
already exists for the file/folder.

To update an existing permission, include both the Permission ID and the
new roles to be assigned. roles is the only property that can be
changed.

To remove permissions, pass in a blob containing only the permissions
you wish to keep (which can be empty, to remove all.) Note that the
owner role will be ignored, as it cannot be removed.

Note that both reading and writing permissions requires extra API calls,
so if you don't need to read or write permissions it is recommended to
omit --onedrive-metadata-permissions.

Metadata and permissions are supported for Folders (directories) as well
as Files. Note that setting the mtime or btime on a Folder requires one
extra API call on OneDrive Business only.

OneDrive does not currently support User Metadata. When writing
metadata, only writeable system properties will be written -- any
read-only or unrecognized keys passed in will be ignored.

TIP: to see the metadata and permissions for any file or folder, run:

    rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read

Here are the possible system metadata items for the onedrive backend.

  ------------------------------------------------------------------------------------------------------------------------------------------
  Name                            Help                               Type        Example                                Read Only
  ------------------------------- ---------------------------------- ----------- -------------------------------------- --------------------
  btime                           Time of file birth (creation) with RFC 3339    2006-01-02T15:04:05Z                   N
                                  S accuracy (mS for OneDrive                                                           
                                  Personal).                                                                            

  content-type                    The MIME type of the file.         string      text/plain                             Y

  created-by-display-name         Display name of the user that      string      John Doe                               Y
                                  created the item.                                                                     

  created-by-id                   ID of the user that created the    string      48d31887-5fad-4d73-a9f5-3c356e68a038   Y
                                  item.                                                                                 

  description                     A short description of the file.   string      Contract for signing                   N
                                  Max 1024 characters. No longer                                                        
                                  supported by Microsoft.                                                               

  id                              The unique identifier of the item  string      01BYE5RZ6QN3ZWBTUFOFD3GSPGOHDJD36K     Y
                                  within OneDrive.                                                                      

  last-modified-by-display-name   Display name of the user that last string      John Doe                               Y
                                  modified the item.                                                                    

  last-modified-by-id             ID of the user that last modified  string      48d31887-5fad-4d73-a9f5-3c356e68a038   Y
                                  the item.                                                                             

  malware-detected                Whether OneDrive has detected that boolean     true                                   Y
                                  the item contains malware.                                                            

  mtime                           Time of last modification with S   RFC 3339    2006-01-02T15:04:05Z                   N
                                  accuracy (mS for OneDrive                                                             
                                  Personal).                                                                            

  package-type                    If present, indicates that this    string      oneNote                                Y
                                  item is a package instead of a                                                        
                                  folder or file. Packages are                                                          
                                  treated like files in some                                                            
                                  contexts and folders in others.                                                       

  permissions                     Permissions in a JSON dump of      JSON        {}                                     N
                                  OneDrive format. Enable with                                                          
                                  --onedrive-metadata-permissions.                                                      
                                  Properties: id, grantedTo,                                                            
                                  grantedToIdentities, invitation,                                                      
                                  inheritedFrom, link, roles,                                                           
                                  shareId                                                                               

  shared-by-id                    ID of the user that shared the     string      48d31887-5fad-4d73-a9f5-3c356e68a038   Y
                                  item (if shared).                                                                     

  shared-owner-id                 ID of the owner of the shared item string      48d31887-5fad-4d73-a9f5-3c356e68a038   Y
                                  (if shared).                                                                          

  shared-scope                    If shared, indicates the scope of  string      users                                  Y
                                  how the item is shared: anonymous,                                                    
                                  organization, or users.                                                               

  shared-time                     Time when the item was shared,     RFC 3339    2006-01-02T15:04:05Z                   Y
                                  with S accuracy (mS for OneDrive                                                      
                                  Personal).                                                                            

  utime                           Time of upload with S accuracy (mS RFC 3339    2006-01-02T15:04:05Z                   Y
                                  for OneDrive Personal).                                                               
  ------------------------------------------------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Impersonate other users as Admin

Unlike Google Drive and impersonating any domain user via service
accounts, OneDrive requires you to authenticate as an admin account, and
manually setup a remote per user you wish to impersonate.

1.  In Microsoft 365 Admin Center, open each user you need to
    "impersonate" and go to the OneDrive section. There is a heading
    called "Get access to files", you need to click to create the link,
    this creates the link of the format
    https://{tenant}-my.sharepoint.com/personal/{user_name_domain_tld}/
    but also changes the permissions so you your admin user has access.

2.  Then in powershell run the following commands:

        Install-Module Microsoft.Graph -Scope CurrentUser -Repository PSGallery -Force
        Import-Module Microsoft.Graph.Files
        Connect-MgGraph -Scopes "Files.ReadWrite.All"
        # Follow the steps to allow access to your admin user
        # Then run this for each user you want to impersonate to get the Drive ID
        Get-MgUserDefaultDrive -UserId '{emailaddress}'
        # This will give you output of the format:
        # Name     Id                                                                 DriveType CreatedDateTime
        # ----     --                                                                 --------- ---------------
        # OneDrive b!XYZ123                                                           business  14/10/2023    1:00:58 pm

3.  Then in rclone add a onedrive remote type, and use the
    Type in driveID with the DriveID you got in the previous step. One
    remote per user. It will then confirm the drive ID, and hopefully
    give you a message of Found drive "root" of type "business" and then
    include the URL of the format
    https://{tenant}-my.sharepoint.com/personal/{user_name_domain_tld}/Documents

Limitations

If you don't use rclone for 90 days the refresh token will expire. This
will result in authorization problems. This is easy to fix by running
the rclone config reconnect remote: command to get a new token and
refresh token.

Naming

Note that OneDrive is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

There are quite a few characters that can't be in OneDrive file names.
These can't occur on Windows platforms, but on non-Windows platforms
they are common. Rclone will map these names to and from an identical
looking unicode equivalent. For example if a file has a ? in it will be
mapped to ？ instead.

File sizes

The largest allowed file size is 250 GiB for both OneDrive Personal and
OneDrive for Business (Updated 13 Jan 2021).

Path length

The entire path, including the file name, must contain fewer than 400
characters for OneDrive, OneDrive for Business and SharePoint Online. If
you are encrypting file and folder names with rclone, you may want to
pay attention to this limitation because the encrypted names are
typically longer than the original ones.

Number of files

OneDrive seems to be OK with at least 50,000 files in a folder, but at
100,000 rclone will get errors listing the directory like
couldn’t list files: UnknownError:. See #2707 for more info.

An official document about the limitations for different types of
OneDrive can be found here.

Versions

Every change in a file OneDrive causes the service to create a new
version of the file. This counts against a users quota. For example
changing the modification time of a file creates a second version, so
the file apparently uses twice the space.

For example the copy command is affected by this as rclone copies the
file and then afterwards sets the modification time to match the source
file which uses another version.

You can use the rclone cleanup command (see below) to remove all old
versions.

Or you can set the no_versions parameter to true and rclone will remove
versions after operations which create new versions. This takes extra
transactions so only enable it if you need it.

Note At the time of writing Onedrive Personal creates versions (but not
for setting the modification time) but the API for removing them returns
"API not found" so cleanup and no_versions should not be used on
Onedrive Personal.

Disabling versioning

Starting October 2018, users will no longer be able to disable
versioning by default. This is because Microsoft has brought an update
to the mechanism. To change this new default setting, a PowerShell
command is required to be run by a SharePoint admin. If you are an
admin, you can run these commands in PowerShell to change that setting:

1.  Install-Module -Name Microsoft.Online.SharePoint.PowerShell (in case
    you haven't installed this already)
2.  Import-Module Microsoft.Online.SharePoint.PowerShell -DisableNameChecking
3.  Connect-SPOService -Url https://YOURSITE-admin.sharepoint.com -Credential YOU@YOURSITE.COM
    (replacing YOURSITE, YOU, YOURSITE.COM with the actual values; this
    will prompt for your credentials)
4.  Set-SPOTenant -EnableMinimumVersionRequirement $False
5.  Disconnect-SPOService (to disconnect from the server)

Below are the steps for normal users to disable versioning. If you don't
see the "No Versioning" option, make sure the above requirements are
met.

User Weropol has found a method to disable versioning on OneDrive

1.  Open the settings menu by clicking on the gear symbol at the top of
    the OneDrive Business page.
2.  Click Site settings.
3.  Once on the Site settings page, navigate to Site Administration >
    Site libraries and lists.
4.  Click Customize "Documents".
5.  Click General Settings > Versioning Settings.
6.  Under Document Version History select the option No versioning.
    Note: This will disable the creation of new file versions, but will
    not remove any previous versions. Your documents are safe.
7.  Apply the changes by clicking OK.
8.  Use rclone to upload or modify files. (I also use the
    --no-update-modtime flag)
9.  Restore the versioning settings after using rclone. (Optional)

Cleanup

OneDrive supports rclone cleanup which causes rclone to look through
every file under the path supplied and delete all version but the
current version. Because this involves traversing all the files, then
querying each file for versions it can be quite slow. Rclone does
--checkers tests in parallel. The command also supports --interactive/i
or --dry-run which is a great way to see what it would do.

    rclone cleanup --interactive remote:path/subdir # interactively remove all old version for path/subdir
    rclone cleanup remote:path/subdir               # unconditionally remove all old version for path/subdir

NB Onedrive personal can't currently delete versions

Troubleshooting

Excessive throttling or blocked on SharePoint

If you experience excessive throttling or is being blocked on SharePoint
then it may help to set the user agent explicitly with a flag like this:
--user-agent "ISV|rclone.org|rclone/v1.55.1"

The specific details can be found in the Microsoft document: Avoid
getting throttled or blocked in SharePoint Online

Unexpected file size/hash differences on Sharepoint

It is a known issue that Sharepoint (not OneDrive or OneDrive for
Business) silently modifies uploaded files, mainly Office files (.docx,
.xlsx, etc.), causing file size and hash checks to fail. There are also
other situations that will cause OneDrive to report inconsistent file
sizes. To use rclone with such affected files on Sharepoint, you may
disable these checks with the following command line arguments:

    --ignore-checksum --ignore-size

Alternatively, if you have write access to the OneDrive files, it may be
possible to fix this problem for certain files, by attempting the steps
below. Open the web interface for OneDrive and find the affected files
(which will be in the error messages/log for rclone). Simply click on
each of these files, causing OneDrive to open them on the web. This will
cause each file to be converted in place to a format that is
functionally equivalent but which will no longer trigger the size
discrepancy. Once all problematic files are converted you will no longer
need the ignore options above.

Replacing/deleting existing files on Sharepoint gets "item not found"

It is a known issue that Sharepoint (not OneDrive or OneDrive for
Business) may return "item not found" errors when users try to replace
or delete uploaded files; this seems to mainly affect Office files
(.docx, .xlsx, etc.) and web files (.html, .aspx, etc.). As a
workaround, you may use the --backup-dir <BACKUP_DIR> command line
argument so rclone moves the files to be replaced/deleted into a given
backup directory (instead of directly replacing/deleting them). For
example, to instruct rclone to move the files into the directory
rclone-backup-dir on backend mysharepoint, you may use:

    --backup-dir mysharepoint:rclone-backup-dir

access_denied (AADSTS65005)

    Error: access_denied
    Code: AADSTS65005
    Description: Using application 'rclone' is currently not supported for your organization [YOUR_ORGANIZATION] because it is in an unmanaged state. An administrator needs to claim ownership of the company by DNS validation of [YOUR_ORGANIZATION] before the application rclone can be provisioned.

This means that rclone can't use the OneDrive for Business API with your
account. You can't do much about it, maybe write an email to your
admins.

However, there are other ways to interact with your OneDrive account.
Have a look at the WebDAV backend: https://rclone.org/webdav/#sharepoint

invalid_grant (AADSTS50076)

    Error: invalid_grant
    Code: AADSTS50076
    Description: Due to a configuration change made by your administrator, or because you moved to a new location, you must use multi-factor authentication to access '...'.

If you see the error above after enabling multi-factor authentication
for your account, you can fix it by refreshing your OAuth refresh token.
To do that, run rclone config, and choose to edit your OneDrive backend.
Then, you don't need to actually make any changes until you reach this
question: Already have a token - refresh?. For this question, answer y
and go through the process to refresh your token, just like the first
time the backend is configured. After this, rclone should work again for
this backend.

Invalid request when making public links

On Sharepoint and OneDrive for Business, rclone link may return an
"Invalid request" error. A possible cause is that the organisation admin
didn't allow public links to be made for the organisation/sharepoint
library. To fix the permissions as an admin, take a look at the docs: 1,
2.

Can not access Shared with me files

Shared with me files is not supported by rclone currently, but there is
a workaround:

1.  Visit https://onedrive.live.com
2.  Right click a item in Shared, then click Add shortcut to My files in
    the context [make_shortcut]
3.  The shortcut will appear in My files, you can access it with rclone,
    it behaves like a normal folder/file. [in_my_files] [rclone_mount]

Live Photos uploaded from iOS (small video clips in .heic files)

The iOS OneDrive app introduced upload and storage of Live Photos in
2020. The usage and download of these uploaded Live Photos is
unfortunately still work-in-progress and this introduces several issues
when copying, synchronising and mounting – both in rclone and in the
native OneDrive client on Windows.

The root cause can easily be seen if you locate one of your Live Photos
in the OneDrive web interface. Then download the photo from the web
interface. You will then see that the size of downloaded .heic file is
smaller than the size displayed in the web interface. The downloaded
file is smaller because it only contains a single frame (still photo)
extracted from the Live Photo (movie) stored in OneDrive.

The different sizes will cause rclone copy/sync to repeatedly recopy
unmodified photos something like this:

    DEBUG : 20230203_123826234_iOS.heic: Sizes differ (src 4470314 vs dst 1298667)
    DEBUG : 20230203_123826234_iOS.heic: sha1 = fc2edde7863b7a7c93ca6771498ac797f8460750 OK
    INFO  : 20230203_123826234_iOS.heic: Copied (replaced existing)

These recopies can be worked around by adding --ignore-size. Please note
that this workaround only syncs the still-picture not the movie clip,
and relies on modification dates being correctly updated on all files in
all situations.

The different sizes will also cause rclone check to report size errors
something like this:

    ERROR : 20230203_123826234_iOS.heic: sizes differ

These check errors can be suppressed by adding --ignore-size.

The different sizes will also cause rclone mount to fail downloading
with an error something like this:

    ERROR : 20230203_123826234_iOS.heic: ReadFileHandle.Read error: low level retry 1/10: unexpected EOF

or like this when using --cache-mode=full:

    INFO  : 20230203_123826234_iOS.heic: vfs cache: downloader: error count now 1: vfs reader: failed to write to cache file: 416 Requested Range Not Satisfiable:
    ERROR : 20230203_123826234_iOS.heic: vfs cache: failed to download: vfs reader: failed to write to cache file: 416 Requested Range Not Satisfiable:

OpenDrive

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    n) New remote
    d) Delete remote
    q) Quit config
    e/n/d/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / OpenDrive
       \ "opendrive"
    [snip]
    Storage> opendrive
    Username
    username>
    Password
    y) Yes type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Configuration complete.
    Options:
    - type: opendrive
    - username:
    - password: *** ENCRYPTED ***
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

List directories in top level of your OpenDrive

    rclone lsd remote:

List all the files in your OpenDrive

    rclone ls remote:

To copy a local directory to an OpenDrive directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

OpenDrive allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not.

The MD5 hash algorithm is supported.

Restricted filename characters

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  /            0x2F        ／
  "            0x22        ＂
  *            0x2A        ＊
  :            0x3A        ：
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  \            0x5C        ＼
  |            0x7C        ｜

File names can also not begin or end with the following characters.
These only get replaced if they are the first or last character in the
name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠
  HT           0x09         ␉
  LF           0x0A         ␊
  VT           0x0B         ␋
  CR           0x0D         ␍

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to opendrive (OpenDrive).

--opendrive-username

Username.

Properties:

-   Config: username
-   Env Var: RCLONE_OPENDRIVE_USERNAME
-   Type: string
-   Required: true

--opendrive-password

Password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_OPENDRIVE_PASSWORD
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to opendrive (OpenDrive).

--opendrive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_OPENDRIVE_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot

--opendrive-chunk-size

Files will be uploaded in chunks this size.

Note that these chunks are buffered in memory so increasing them will
increase memory use.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_OPENDRIVE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 10Mi

--opendrive-access

Files and folders will be uploaded with this access permission (default
private)

Properties:

-   Config: access
-   Env Var: RCLONE_OPENDRIVE_ACCESS
-   Type: string
-   Default: "private"
-   Examples:
    -   "private"
        -   The file or folder access can be granted in a way that will
            allow select users to view, read or write what is absolutely
            essential for them.
    -   "public"
        -   The file or folder can be downloaded by anyone from a web
            browser. The link can be shared in any way,
    -   "hidden"
        -   The file or folder can be accessed has the same restrictions
            as Public if the user knows the URL of the file or folder
            link in order to access the contents

--opendrive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_OPENDRIVE_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Note that OpenDrive is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

There are quite a few characters that can't be in OpenDrive file names.
These can't occur on Windows platforms, but on non-Windows platforms
they are common. Rclone will map these names to and from an identical
looking unicode equivalent. For example if a file has a ? in it will be
mapped to ？ instead.

rclone about is not supported by the OpenDrive backend. Backends without
this capability cannot determine free space for an rclone mount or use
policy mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Oracle Object Storage

Object Storage provided by the Oracle Cloud Infrastructure (OCI). Read
more at <oracle.com>:

-   Oracle Object Storage Overview
-   Oracle Object Storage FAQ

Paths are specified as remote:bucket (or remote: for the lsd command).
You may put subdirectories in too, e.g. remote:bucket/path/to/dir.

Sample command to transfer local artifacts to remote:bucket in oracle
object storage:

    rclone -vvv  --progress --stats-one-line --max-stats-groups 10 --log-format date,time,UTC,longfile --fast-list --buffer-size 256Mi --oos-no-check-bucket --oos-upload-cutoff 10Mi --multi-thread-cutoff 16Mi --multi-thread-streams 3000 --transfers 3000 --checkers 64  --retries 2  --oos-chunk-size 10Mi --oos-upload-concurrency 10000  --oos-attempt-resume-upload --oos-leave-parts-on-error sync ./artifacts  remote:bucket -vv

Configuration

Here is an example of making an oracle object storage configuration.
rclone config walks you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> n

    Enter name for new remote.
    name> remote

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [snip]
    XX / Oracle Cloud Infrastructure Object Storage
       \ (oracleobjectstorage)
    Storage> oracleobjectstorage

    Option provider.
    Choose your Auth Provider
    Choose a number from below, or type in your own string value.
    Press Enter for the default (env_auth).
     1 / automatically pickup the credentials from runtime(env), first one to provide auth wins
       \ (env_auth)
       / use an OCI user and an API key for authentication.
     2 | you’ll need to put in a config file your tenancy OCID, user OCID, region, the path, fingerprint to an API key.
       | https://docs.oracle.com/en-us/iaas/Content/API/Concepts/sdkconfig.htm
       \ (user_principal_auth)
       / use instance principals to authorize an instance to make API calls.
     3 | each instance has its own identity, and authenticates using the certificates that are read from instance metadata.
       | https://docs.oracle.com/en-us/iaas/Content/Identity/Tasks/callingservicesfrominstances.htm
       \ (instance_principal_auth)
       / use workload identity to grant Kubernetes pods policy-driven access to Oracle Cloud
     4 | Infrastructure (OCI) resources using OCI Identity and Access Management (IAM).
       | https://docs.oracle.com/en-us/iaas/Content/ContEng/Tasks/contenggrantingworkloadaccesstoresources.htm
       \ (workload_identity_auth)
     5 / use resource principals to make API calls
       \ (resource_principal_auth)
     6 / no credentials needed, this is typically for reading public buckets
       \ (no_auth)
    provider> 2

    Option namespace.
    Object storage namespace
    Enter a value.
    namespace> idbamagbg734

    Option compartment.
    Object storage compartment OCID
    Enter a value.
    compartment> ocid1.compartment.oc1..aaaaaaaapufkxc7ame3sthry5i7ujrwfc7ejnthhu6bhanm5oqfjpyasjkba

    Option region.
    Object storage Region
    Enter a value.
    region> us-ashburn-1

    Option endpoint.
    Endpoint for Object storage API.
    Leave blank to use the default endpoint for the region.
    Enter a value. Press Enter to leave empty.
    endpoint> 

    Option config_file.
    Full Path to OCI config file
    Choose a number from below, or type in your own string value.
    Press Enter for the default (~/.oci/config).
     1 / oci configuration file location
       \ (~/.oci/config)
    config_file> /etc/oci/dev.conf

    Option config_profile.
    Profile name inside OCI config file
    Choose a number from below, or type in your own string value.
    Press Enter for the default (Default).
     1 / Use the default profile
       \ (Default)
    config_profile> Test

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: oracleobjectstorage
    - namespace: idbamagbg734
    - compartment: ocid1.compartment.oc1..aaaaaaaapufkxc7ame3sthry5i7ujrwfc7ejnthhu6bhanm5oqfjpyasjkba
    - region: us-ashburn-1
    - provider: user_principal_auth
    - config_file: /etc/oci/dev.conf
    - config_profile: Test
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See all buckets

    rclone lsd remote:

Create a new bucket

    rclone mkdir remote:bucket

List the contents of a bucket

    rclone ls remote:bucket
    rclone ls remote:bucket --max-depth 1

Authentication Providers

OCI has various authentication methods. To learn more about
authentication methods please refer oci authentication methods These
choices can be specified in the rclone config file.

Rclone supports the following OCI authentication provider.

    User Principal
    Instance Principal
    Resource Principal
    Workload Identity
    No authentication

User Principal

Sample rclone config file for Authentication Provider User Principal:

    [oos]
    type = oracleobjectstorage
    namespace = id<redacted>34
    compartment = ocid1.compartment.oc1..aa<redacted>ba
    region = us-ashburn-1
    provider = user_principal_auth
    config_file = /home/opc/.oci/config
    config_profile = Default

Advantages:

-   One can use this method from any server within OCI or on-premises or
    from other cloud provider.

Considerations:

-   you need to configure user’s privileges / policy to allow access to
    object storage
-   Overhead of managing users and keys.
-   If the user is deleted, the config file will no longer work and may
    cause automation regressions that use the user's credentials.

Instance Principal

An OCI compute instance can be authorized to use rclone by using it's
identity and certificates as an instance principal. With this approach
no credentials have to be stored and managed.

Sample rclone configuration file for Authentication Provider Instance
Principal:

    [opc@rclone ~]$ cat ~/.config/rclone/rclone.conf
    [oos]
    type = oracleobjectstorage
    namespace = id<redacted>fn
    compartment = ocid1.compartment.oc1..aa<redacted>k7a
    region = us-ashburn-1
    provider = instance_principal_auth

Advantages:

-   With instance principals, you don't need to configure user
    credentials and transfer/ save it to disk in your compute instances
    or rotate the credentials.
-   You don’t need to deal with users and keys.
-   Greatly helps in automation as you don't have to manage access keys,
    user private keys, storing them in vault, using kms etc.

Considerations:

-   You need to configure a dynamic group having this instance as member
    and add policy to read object storage to that dynamic group.
-   Everyone who has access to this machine can execute the CLI
    commands.
-   It is applicable for oci compute instances only. It cannot be used
    on external instance or resources.

Resource Principal

Resource principal auth is very similar to instance principal auth but
used for resources that are not compute instances such as serverless
functions. To use resource principal ensure Rclone process is started
with these environment variables set in its process.

    export OCI_RESOURCE_PRINCIPAL_VERSION=2.2
    export OCI_RESOURCE_PRINCIPAL_REGION=us-ashburn-1
    export OCI_RESOURCE_PRINCIPAL_PRIVATE_PEM=/usr/share/model-server/key.pem
    export OCI_RESOURCE_PRINCIPAL_RPST=/usr/share/model-server/security_token

Sample rclone configuration file for Authentication Provider Resource
Principal:

    [oos]
    type = oracleobjectstorage
    namespace = id<redacted>34
    compartment = ocid1.compartment.oc1..aa<redacted>ba
    region = us-ashburn-1
    provider = resource_principal_auth

Workload Identity

Workload Identity auth may be used when running Rclone from Kubernetes
pod on a Container Engine for Kubernetes (OKE) cluster. For more details
on configuring Workload Identity, see Granting Workloads Access to OCI
Resources. To use workload identity, ensure Rclone is started with these
environment variables set in its process.

    export OCI_RESOURCE_PRINCIPAL_VERSION=2.2
    export OCI_RESOURCE_PRINCIPAL_REGION=us-ashburn-1

No authentication

Public buckets do not require any authentication mechanism to read
objects. Sample rclone configuration file for No authentication:

    [oos]
    type = oracleobjectstorage
    namespace = id<redacted>34
    compartment = ocid1.compartment.oc1..aa<redacted>ba
    region = us-ashburn-1
    provider = no_auth

Modification times and hashes

The modification time is stored as metadata on the object as
opc-meta-mtime as floating point since the epoch, accurate to 1 ns.

If the modification time needs to be updated rclone will attempt to
perform a server side copy to update the modification if the object can
be copied in a single part. In the case the object is larger than 5Gb,
the object will be uploaded rather than copied.

Note that reading this from the object takes an additional HEAD request
as the metadata isn't returned in object listings.

The MD5 hash algorithm is supported.

Multipart uploads

rclone supports multipart uploads with OOS which means that it can
upload files bigger than 5 GiB.

Note that files uploaded both with multipart upload and through crypt
remotes do not have MD5 sums.

rclone switches from single part uploads to multipart uploads at the
point specified by --oos-upload-cutoff. This can be a maximum of 5 GiB
and a minimum of 0 (ie always upload multipart files).

The chunk sizes used in the multipart upload are specified by
--oos-chunk-size and the number of chunks uploaded concurrently is
specified by --oos-upload-concurrency.

Multipart uploads will use --transfers * --oos-upload-concurrency *
--oos-chunk-size extra memory. Single part uploads to not use extra
memory.

Single part transfers can be faster than multipart transfers or slower
depending on your latency from oos - the more latency, the more likely
single part transfers will be faster.

Increasing --oos-upload-concurrency will increase throughput (8 would be
a sensible value) and increasing --oos-chunk-size also increases
throughput (16M would be sensible). Increasing either of these will use
more memory. The default values are high enough to gain most of the
possible performance without using too much memory.

Standard options

Here are the Standard options specific to oracleobjectstorage (Oracle
Cloud Infrastructure Object Storage).

--oos-provider

Choose your Auth Provider

Properties:

-   Config: provider
-   Env Var: RCLONE_OOS_PROVIDER
-   Type: string
-   Default: "env_auth"
-   Examples:
    -   "env_auth"
        -   automatically pickup the credentials from runtime(env),
            first one to provide auth wins
    -   "user_principal_auth"
        -   use an OCI user and an API key for authentication.
        -   you’ll need to put in a config file your tenancy OCID, user
            OCID, region, the path, fingerprint to an API key.
        -   https://docs.oracle.com/en-us/iaas/Content/API/Concepts/sdkconfig.htm
    -   "instance_principal_auth"
        -   use instance principals to authorize an instance to make API
            calls.
        -   each instance has its own identity, and authenticates using
            the certificates that are read from instance metadata.
        -   https://docs.oracle.com/en-us/iaas/Content/Identity/Tasks/callingservicesfrominstances.htm
    -   "workload_identity_auth"
        -   use workload identity to grant OCI Container Engine for
            Kubernetes workloads policy-driven access to OCI resources
            using OCI Identity and Access Management (IAM).
        -   https://docs.oracle.com/en-us/iaas/Content/ContEng/Tasks/contenggrantingworkloadaccesstoresources.htm
    -   "resource_principal_auth"
        -   use resource principals to make API calls
    -   "no_auth"
        -   no credentials needed, this is typically for reading public
            buckets

--oos-namespace

Object storage namespace

Properties:

-   Config: namespace
-   Env Var: RCLONE_OOS_NAMESPACE
-   Type: string
-   Required: true

--oos-compartment

Specify compartment OCID, if you need to list buckets.

List objects works without compartment OCID.

Properties:

-   Config: compartment
-   Env Var: RCLONE_OOS_COMPARTMENT
-   Provider: !no_auth
-   Type: string
-   Required: false

--oos-region

Object storage Region

Properties:

-   Config: region
-   Env Var: RCLONE_OOS_REGION
-   Type: string
-   Required: true

--oos-endpoint

Endpoint for Object storage API.

Leave blank to use the default endpoint for the region.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_OOS_ENDPOINT
-   Type: string
-   Required: false

--oos-config-file

Path to OCI config file

Properties:

-   Config: config_file
-   Env Var: RCLONE_OOS_CONFIG_FILE
-   Provider: user_principal_auth
-   Type: string
-   Default: "~/.oci/config"
-   Examples:
    -   "~/.oci/config"
        -   oci configuration file location

--oos-config-profile

Profile name inside the oci config file

Properties:

-   Config: config_profile
-   Env Var: RCLONE_OOS_CONFIG_PROFILE
-   Provider: user_principal_auth
-   Type: string
-   Default: "Default"
-   Examples:
    -   "Default"
        -   Use the default profile

Advanced options

Here are the Advanced options specific to oracleobjectstorage (Oracle
Cloud Infrastructure Object Storage).

--oos-storage-tier

The storage class to use when storing new objects in storage.
https://docs.oracle.com/en-us/iaas/Content/Object/Concepts/understandingstoragetiers.htm

Properties:

-   Config: storage_tier
-   Env Var: RCLONE_OOS_STORAGE_TIER
-   Type: string
-   Default: "Standard"
-   Examples:
    -   "Standard"
        -   Standard storage tier, this is the default tier
    -   "InfrequentAccess"
        -   InfrequentAccess storage tier
    -   "Archive"
        -   Archive storage tier

--oos-upload-cutoff

Cutoff for switching to chunked upload.

Any files larger than this will be uploaded in chunks of chunk_size. The
minimum is 0 and the maximum is 5 GiB.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_OOS_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 200Mi

--oos-chunk-size

Chunk size to use for uploading.

When uploading files larger than upload_cutoff or files with unknown
size (e.g. from "rclone rcat" or uploaded with "rclone mount" they will
be uploaded as multipart uploads using this chunk size.

Note that "upload_concurrency" chunks of this size are buffered in
memory per transfer.

If you are transferring large files over high-speed links and you have
enough memory, then increasing this will speed up the transfers.

Rclone will automatically increase the chunk size when uploading a large
file of known size to stay below the 10,000 chunks limit.

Files of unknown size are uploaded with the configured chunk_size. Since
the default chunk size is 5 MiB and there can be at most 10,000 chunks,
this means that by default the maximum size of a file you can stream
upload is 48 GiB. If you wish to stream upload larger files then you
will need to increase chunk_size.

Increasing the chunk size decreases the accuracy of the progress
statistics displayed with "-P" flag.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_OOS_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 5Mi

--oos-max-upload-parts

Maximum number of parts in a multipart upload.

This option defines the maximum number of multipart chunks to use when
doing a multipart upload.

OCI has max parts limit of 10,000 chunks.

Rclone will automatically increase the chunk size when uploading a large
file of a known size to stay below this number of chunks limit.

Properties:

-   Config: max_upload_parts
-   Env Var: RCLONE_OOS_MAX_UPLOAD_PARTS
-   Type: int
-   Default: 10000

--oos-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded
concurrently.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_OOS_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 10

--oos-copy-cutoff

Cutoff for switching to multipart copy.

Any files larger than this that need to be server-side copied will be
copied in chunks of this size.

The minimum is 0 and the maximum is 5 GiB.

Properties:

-   Config: copy_cutoff
-   Env Var: RCLONE_OOS_COPY_CUTOFF
-   Type: SizeSuffix
-   Default: 4.656Gi

--oos-copy-timeout

Timeout for copy.

Copy is an asynchronous operation, specify timeout to wait for copy to
succeed

Properties:

-   Config: copy_timeout
-   Env Var: RCLONE_OOS_COPY_TIMEOUT
-   Type: Duration
-   Default: 1m0s

--oos-disable-checksum

Don't store MD5 checksum with object metadata.

Normally rclone will calculate the MD5 checksum of the input before
uploading it so it can add it to metadata on the object. This is great
for data integrity checking but can cause long delays for large files to
start uploading.

Properties:

-   Config: disable_checksum
-   Env Var: RCLONE_OOS_DISABLE_CHECKSUM
-   Type: bool
-   Default: false

--oos-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_OOS_ENCODING
-   Type: Encoding
-   Default: Slash,InvalidUtf8,Dot

--oos-leave-parts-on-error

If true avoid calling abort upload on a failure, leaving all
successfully uploaded parts for manual recovery.

It should be set to true for resuming uploads across different sessions.

WARNING: Storing parts of an incomplete multipart upload counts towards
space usage on object storage and will add additional costs if not
cleaned up.

Properties:

-   Config: leave_parts_on_error
-   Env Var: RCLONE_OOS_LEAVE_PARTS_ON_ERROR
-   Type: bool
-   Default: false

--oos-attempt-resume-upload

If true attempt to resume previously started multipart upload for the
object. This will be helpful to speed up multipart transfers by resuming
uploads from past session.

WARNING: If chunk size differs in resumed session from past incomplete
session, then the resumed multipart upload is aborted and a new
multipart upload is started with the new chunk size.

The flag leave_parts_on_error must be true to resume and optimize to
skip parts that were already uploaded successfully.

Properties:

-   Config: attempt_resume_upload
-   Env Var: RCLONE_OOS_ATTEMPT_RESUME_UPLOAD
-   Type: bool
-   Default: false

--oos-no-check-bucket

If set, don't attempt to check the bucket exists or create it.

This can be useful when trying to minimise the number of transactions
rclone does if you know the bucket exists already.

It can also be needed if the user you are using does not have bucket
creation permissions.

Properties:

-   Config: no_check_bucket
-   Env Var: RCLONE_OOS_NO_CHECK_BUCKET
-   Type: bool
-   Default: false

--oos-sse-customer-key-file

To use SSE-C, a file containing the base64-encoded string of the AES-256
encryption key associated with the object. Please note only one of
sse_customer_key_file|sse_customer_key|sse_kms_key_id is needed.'

Properties:

-   Config: sse_customer_key_file
-   Env Var: RCLONE_OOS_SSE_CUSTOMER_KEY_FILE
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--oos-sse-customer-key

To use SSE-C, the optional header that specifies the base64-encoded
256-bit encryption key to use to encrypt or decrypt the data. Please
note only one of sse_customer_key_file|sse_customer_key|sse_kms_key_id
is needed. For more information, see Using Your Own Keys for Server-Side
Encryption
(https://docs.cloud.oracle.com/Content/Object/Tasks/usingyourencryptionkeys.htm)

Properties:

-   Config: sse_customer_key
-   Env Var: RCLONE_OOS_SSE_CUSTOMER_KEY
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--oos-sse-customer-key-sha256

If using SSE-C, The optional header that specifies the base64-encoded
SHA256 hash of the encryption key. This value is used to check the
integrity of the encryption key. see Using Your Own Keys for Server-Side
Encryption
(https://docs.cloud.oracle.com/Content/Object/Tasks/usingyourencryptionkeys.htm).

Properties:

-   Config: sse_customer_key_sha256
-   Env Var: RCLONE_OOS_SSE_CUSTOMER_KEY_SHA256
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--oos-sse-kms-key-id

if using your own master key in vault, this header specifies the OCID
(https://docs.cloud.oracle.com/Content/General/Concepts/identifiers.htm)
of a master encryption key used to call the Key Management service to
generate a data encryption key or to encrypt or decrypt a data
encryption key. Please note only one of
sse_customer_key_file|sse_customer_key|sse_kms_key_id is needed.

Properties:

-   Config: sse_kms_key_id
-   Env Var: RCLONE_OOS_SSE_KMS_KEY_ID
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None

--oos-sse-customer-algorithm

If using SSE-C, the optional header that specifies "AES256" as the
encryption algorithm. Object Storage supports "AES256" as the encryption
algorithm. For more information, see Using Your Own Keys for Server-Side
Encryption
(https://docs.cloud.oracle.com/Content/Object/Tasks/usingyourencryptionkeys.htm).

Properties:

-   Config: sse_customer_algorithm
-   Env Var: RCLONE_OOS_SSE_CUSTOMER_ALGORITHM
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   None
    -   "AES256"
        -   AES256

--oos-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_OOS_DESCRIPTION
-   Type: string
-   Required: false

Metadata

User metadata is stored as opc-meta- keys.

Here are the possible system metadata items for the oracleobjectstorage
backend.

  --------------------------------------------------------------------------------------------
  Name             Help           Type        Example                     Read Only
  ---------------- -------------- ----------- --------------------------- --------------------
  opc-meta-atime   Time of last   ISO 8601    2025-06-30T22:27:43-04:00   N
                   access                                                 

  opc-meta-btime   Time of file   ISO 8601    2025-06-30T22:27:43-04:00   N
                   birth                                                  
                   (creation)                                             

  opc-meta-gid     Group ID of    decimal     500                         N
                   owner          number                                  

  opc-meta-mode    File type and  octal, unix 0100664                     N
                   mode           style                                   

  opc-meta-mtime   Time of last   ISO 8601    2025-06-30T22:27:43-04:00   N
                   modification                                           

  opc-meta-uid     User ID of     decimal     500                         N
                   owner          number                                  
  --------------------------------------------------------------------------------------------

See the metadata docs for more info.

Backend commands

Here are the commands specific to the oracleobjectstorage backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

rename

change the name of an object.

    rclone backend rename remote: [options] [<arguments>+]

This command can be used to rename a object.

Usage example:

    rclone backend rename oos:bucket relative-object-path-under-bucket object-new-name

list-multipart-uploads

List the unfinished multipart uploads.

    rclone backend list-multipart-uploads remote: [options] [<arguments>+]

This command lists the unfinished multipart uploads in JSON format.

Usage example:

    rclone backend list-multipart-uploads oos:bucket/path/to/object

It returns a dictionary of buckets with values as lists of unfinished
multipart uploads.

You can call it with no bucket in which case it lists all bucket, with a
bucket or with a bucket and path.

    {
        "test-bucket": [
            {
                "namespace": "test-namespace",
                "bucket": "test-bucket",
                "object": "600m.bin",
                "uploadId": "51dd8114-52a4-b2f2-c42f-5291f05eb3c8",
                "timeCreated": "2022-07-29T06:21:16.595Z",
                "storageTier": "Standard"
            }
        ]
    }

    ### cleanup

    Remove unfinished multipart uploads.

    ```console
    rclone backend cleanup remote: [options] [<arguments>+]

This command removes unfinished multipart uploads of age greater than
max-age which defaults to 24 hours.

Note that you can use --interactive/-i or --dry-run with this command to
see what it would do.

Usage examples:

    rclone backend cleanup oos:bucket/path/to/object
    rclone backend cleanup -o max-age=7w oos:bucket/path/to/object

Durations are parsed as per the rest of rclone, 2h, 7d, 7w etc.

Options:

-   "max-age": Max age of upload to delete.

restore

Restore objects from Archive to Standard storage.

    rclone backend restore remote: [options] [<arguments>+]

This command can be used to restore one or more objects from Archive to
Standard storage.

Usage examples:

    rclone backend restore oos:bucket/path/to/directory -o hours=HOURS
    rclone backend restore oos:bucket -o hours=HOURS

This flag also obeys the filters. Test first with --interactive/-i or
--dry-run flags

    rclone --interactive backend restore --include "*.txt" oos:bucket/path -o hours=72

All the objects shown will be marked for restore, then:

    rclone backend restore --include "*.txt" oos:bucket/path -o hours=72

It returns a list of status dictionaries with Object Name and Status
keys. The Status will be "RESTORED"" if it was successful or an error
message if not.

    [
        {
            "Object": "test.txt"
            "Status": "RESTORED",
        },
        {
            "Object": "test/file4.txt"
            "Status": "RESTORED",
        }
    ]

Options:

-   "hours": The number of hours for which this object will be restored.
    Default is 24 hrs.

Tutorials

Mounting Buckets

QingStor

Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, e.g. remote:bucket/path/to/dir.

Configuration

Here is an example of making an QingStor configuration. First run

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    n/r/c/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / QingStor Object Storage
       \ "qingstor"
    [snip]
    Storage> qingstor
    Get QingStor credentials from runtime. Only applies if access_key_id and secret_access_key is blank.
    Choose a number from below, or type in your own value
     1 / Enter QingStor credentials in the next step
       \ "false"
     2 / Get QingStor credentials from the environment (env vars or IAM)
       \ "true"
    env_auth> 1
    QingStor Access Key ID - leave blank for anonymous access or runtime credentials.
    access_key_id> access_key
    QingStor Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
    secret_access_key> secret_key
    Enter an endpoint URL to connection QingStor API.
    Leave blank will use the default value "https://qingstor.com:443"
    endpoint>
    Zone connect to. Default is "pek3a".
    Choose a number from below, or type in your own value
       / The Beijing (China) Three Zone
     1 | Needs location constraint pek3a.
       \ "pek3a"
       / The Shanghai (China) First Zone
     2 | Needs location constraint sh1a.
       \ "sh1a"
    zone> 1
    Number of connection retry.
    Leave blank will use the default value "3".
    connection_retries>
    Remote config
    Configuration complete.
    Options:
    - type: qingstor
    - env_auth: false
    - access_key_id: access_key
    - secret_access_key: secret_key
    - endpoint:
    - zone: pek3a
    - connection_retries:
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This remote is called remote and can now be used like this

See all buckets

    rclone lsd remote:

Make a new bucket

    rclone mkdir remote:bucket

List the contents of a bucket

    rclone ls remote:bucket

Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.

    rclone sync --interactive /home/local/directory remote:bucket

--fast-list

This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

Multipart uploads

rclone supports multipart uploads with QingStor which means that it can
upload files bigger than 5 GiB. Note that files uploaded with multipart
upload don't have an MD5SUM.

Note that incomplete multipart uploads older than 24 hours can be
removed with rclone cleanup remote:bucket just for one bucket
rclone cleanup remote: for all buckets. QingStor does not ever remove
incomplete multipart uploads so it may be necessary to run this from
time to time.

Buckets and Zone

With QingStor you can list buckets (rclone lsd) using any zone, but you
can only access the content of a bucket from the zone it was created in.
If you attempt to access a bucket from the wrong zone, you will get an
error, incorrect zone, the bucket is not in 'XXX' zone.

Authentication

There are two ways to supply rclone with a set of QingStor credentials.
In order of precedence:

-   Directly in the rclone configuration file (as configured by
    rclone config)
    -   set access_key_id and secret_access_key
-   Runtime configuration:
    -   set env_auth to true in the config file
    -   Exporting the following environment variables before running
        rclone
        -   Access Key ID: QS_ACCESS_KEY_ID or QS_ACCESS_KEY
        -   Secret Access Key: QS_SECRET_ACCESS_KEY or QS_SECRET_KEY

Restricted filename characters

The control characters 0x00-0x1F and / are replaced as in the default
restricted characters set. Note that 0x7F is not replaced.

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to qingstor (QingCloud Object
Storage).

--qingstor-env-auth

Get QingStor credentials from runtime.

Only applies if access_key_id and secret_access_key is blank.

Properties:

-   Config: env_auth
-   Env Var: RCLONE_QINGSTOR_ENV_AUTH
-   Type: bool
-   Default: false
-   Examples:
    -   "false"
        -   Enter QingStor credentials in the next step.
    -   "true"
        -   Get QingStor credentials from the environment (env vars or
            IAM).

--qingstor-access-key-id

QingStor Access Key ID.

Leave blank for anonymous access or runtime credentials.

Properties:

-   Config: access_key_id
-   Env Var: RCLONE_QINGSTOR_ACCESS_KEY_ID
-   Type: string
-   Required: false

--qingstor-secret-access-key

QingStor Secret Access Key (password).

Leave blank for anonymous access or runtime credentials.

Properties:

-   Config: secret_access_key
-   Env Var: RCLONE_QINGSTOR_SECRET_ACCESS_KEY
-   Type: string
-   Required: false

--qingstor-endpoint

Enter an endpoint URL to connection QingStor API.

Leave blank will use the default value "https://qingstor.com:443".

Properties:

-   Config: endpoint
-   Env Var: RCLONE_QINGSTOR_ENDPOINT
-   Type: string
-   Required: false

--qingstor-zone

Zone to connect to.

Default is "pek3a".

Properties:

-   Config: zone
-   Env Var: RCLONE_QINGSTOR_ZONE
-   Type: string
-   Required: false
-   Examples:
    -   "pek3a"
        -   The Beijing (China) Three Zone.
        -   Needs location constraint pek3a.
    -   "sh1a"
        -   The Shanghai (China) First Zone.
        -   Needs location constraint sh1a.
    -   "gd2a"
        -   The Guangdong (China) Second Zone.
        -   Needs location constraint gd2a.

Advanced options

Here are the Advanced options specific to qingstor (QingCloud Object
Storage).

--qingstor-connection-retries

Number of connection retries.

Properties:

-   Config: connection_retries
-   Env Var: RCLONE_QINGSTOR_CONNECTION_RETRIES
-   Type: int
-   Default: 3

--qingstor-upload-cutoff

Cutoff for switching to chunked upload.

Any files larger than this will be uploaded in chunks of chunk_size. The
minimum is 0 and the maximum is 5 GiB.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_QINGSTOR_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 200Mi

--qingstor-chunk-size

Chunk size to use for uploading.

When uploading files larger than upload_cutoff they will be uploaded as
multipart uploads using this chunk size.

Note that "--qingstor-upload-concurrency" chunks of this size are
buffered in memory per transfer.

If you are transferring large files over high-speed links and you have
enough memory, then increasing this will speed up the transfers.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_QINGSTOR_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 4Mi

--qingstor-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded
concurrently.

NB if you set this to > 1 then the checksums of multipart uploads become
corrupted (the uploads themselves are not corrupted though).

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_QINGSTOR_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 1

--qingstor-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_QINGSTOR_ENCODING
-   Type: Encoding
-   Default: Slash,Ctl,InvalidUtf8

--qingstor-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_QINGSTOR_DESCRIPTION
-   Type: string
-   Required: false

Limitations

rclone about is not supported by the qingstor backend. Backends without
this capability cannot determine free space for an rclone mount or use
policy mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Quatrix

Quatrix by Maytech is Quatrix Secure Compliant File Sharing | Maytech.

Paths are specified as remote:path

Paths may be as deep as required, e.g., remote:directory/subdirectory.

The initial setup for Quatrix involves getting an API Key from Quatrix.
You can get the API key in the user's profile at
https://<account>/profile/api-keys or with the help of the API -
https://docs.maytech.net/quatrix/quatrix-api/api-explorer#/API-Key/post_api_key_create.

See complete Swagger documentation for Quatrix.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Quatrix by Maytech
       \ "quatrix"
    [snip]
    Storage> quatrix
    API key for accessing Quatrix account.
    api_key> your_api_key
    Host name of Quatrix account.
    host> example.quatrix.it

    Configuration complete.
    Options:
    - type: quatrix
    - api_key: your_api_key
    - host: example.quatrix.it
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your Quatrix

    rclone lsd remote:

List all the files in your Quatrix

    rclone ls remote:

To copy a local directory to an Quatrix directory called backup

    rclone copy /home/source remote:backup

API key validity

API Key is created with no expiration date. It will be valid until you
delete or deactivate it in your account. After disabling, the API Key
can be enabled back. If the API Key was deleted and a new key was
created, you can update it in rclone config. The same happens if the
hostname was changed.

    $ rclone config
    Current remotes:

    Name                 Type
    ====                 ====
    remote               quatrix

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> e
    Choose a number from below, or type in an existing value
     1 > remote
    remote> remote
    Configuration complete.
    Options:
    - type: quatrix
    - host: some_host.quatrix.it
    - api_key: your_api_key
    Keep this "remote" remote?
    Edit remote
    Option api_key.
    API key for accessing Quatrix account
    Enter a string value. Press Enter for the default (your_api_key)
    api_key>
    Option host.
    Host name of Quatrix account
    Enter a string value. Press Enter for the default (some_host.quatrix.it).

    Configuration complete.
    Options:
    - type: quatrix
    - host: some_host.quatrix.it
    - api_key: your_api_key
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Modification times and hashes

Quatrix allows modification times to be set on objects accurate to 1
microsecond. These will be used to detect whether objects need syncing
or not.

Quatrix does not support hashes, so you cannot use the --checksum flag.

Restricted filename characters

File names in Quatrix are case sensitive and have limitations like the
maximum length of a filename is 255, and the minimum length is 1. A file
name cannot be equal to . or .. nor contain / , \ or non-printable
ascii.

Transfers

For files above 50 MiB rclone will use a chunked transfer. Rclone will
upload up to --transfers chunks at the same time (shared among all
multipart uploads). Chunks are buffered in memory, and the minimal chunk
size is 10_000_000 bytes by default, and it can be changed in the
advanced configuration, so increasing --transfers will increase the
memory use. The chunk size has a maximum size limit, which is set to
100_000_000 bytes by default and can be changed in the advanced
configuration. The size of the uploaded chunk will dynamically change
depending on the upload speed. The total memory use equals the number of
transfers multiplied by the minimal chunk size. In case there's free
memory allocated for the upload (which equals the difference of
maximal_summary_chunk_size and minimal_chunk_size * transfers), the
chunk size may increase in case of high upload speed. As well as it can
decrease in case of upload speed problems. If no free memory is
available, all chunks will equal minimal_chunk_size.

Deleting files

Files you delete with rclone will end up in Trash and be stored there
for 30 days. Quatrix also provides an API to permanently delete files
and an API to empty the Trash so that you can remove files permanently
from your account.

Standard options

Here are the Standard options specific to quatrix (Quatrix by Maytech).

--quatrix-api-key

API key for accessing Quatrix account

Properties:

-   Config: api_key
-   Env Var: RCLONE_QUATRIX_API_KEY
-   Type: string
-   Required: true

--quatrix-host

Host name of Quatrix account

Properties:

-   Config: host
-   Env Var: RCLONE_QUATRIX_HOST
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to quatrix (Quatrix by Maytech).

--quatrix-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_QUATRIX_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--quatrix-effective-upload-time

Wanted upload time for one chunk

Properties:

-   Config: effective_upload_time
-   Env Var: RCLONE_QUATRIX_EFFECTIVE_UPLOAD_TIME
-   Type: string
-   Default: "4s"

--quatrix-minimal-chunk-size

The minimal size for one chunk

Properties:

-   Config: minimal_chunk_size
-   Env Var: RCLONE_QUATRIX_MINIMAL_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 9.537Mi

--quatrix-maximal-summary-chunk-size

The maximal summary for all chunks. It should not be less than
'transfers'*'minimal_chunk_size'

Properties:

-   Config: maximal_summary_chunk_size
-   Env Var: RCLONE_QUATRIX_MAXIMAL_SUMMARY_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 95.367Mi

--quatrix-hard-delete

Delete files permanently rather than putting them into the trash

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_QUATRIX_HARD_DELETE
-   Type: bool
-   Default: false

--quatrix-skip-project-folders

Skip project folders in operations

Properties:

-   Config: skip_project_folders
-   Env Var: RCLONE_QUATRIX_SKIP_PROJECT_FOLDERS
-   Type: bool
-   Default: false

--quatrix-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_QUATRIX_DESCRIPTION
-   Type: string
-   Required: false

Storage usage

The storage usage in Quatrix is restricted to the account during the
purchase. You can restrict any user with a smaller storage limit. The
account limit is applied if the user has no custom storage limit. Once
you've reached the limit, the upload of files will fail. This can be
fixed by freeing up the space or increasing the quota.

Server-side operations

Quatrix supports server-side operations (copy and move). In case of
conflict, files are overwritten during server-side operation.

Sia

Sia (sia.tech) is a decentralized cloud storage platform based on the
blockchain technology. With rclone you can use it like any other remote
filesystem or mount Sia folders locally. The technology behind it
involves a number of new concepts such as Siacoins and Wallet,
Blockchain and Consensus, Renting and Hosting, and so on. If you are new
to it, you'd better first familiarize yourself using their excellent
support documentation.

Introduction

Before you can use rclone with Sia, you will need to have a running copy
of Sia-UI or siad (the Sia daemon) locally on your computer or on local
network (e.g. a NAS). Please follow the Get started guide and install
one.

rclone interacts with Sia network by talking to the Sia daemon via HTTP
API which is usually available on port 9980. By default you will run the
daemon locally on the same computer so it's safe to leave the API
password blank (the API URL will be http://127.0.0.1:9980 making
external access impossible).

However, if you want to access Sia daemon running on another node, for
example due to memory constraints or because you want to share single
daemon between several rclone and Sia-UI instances, you'll need to make
a few more provisions:

-   Ensure you have Sia daemon installed directly or in a docker
    container because Sia-UI does not support this mode natively.
-   Run it on externally accessible port, for example provide
    --api-addr :9980 and --disable-api-security arguments on the daemon
    command line.
-   Enforce API password for the siad daemon via environment variable
    SIA_API_PASSWORD or text file named apipassword in the daemon
    directory.
-   Set rclone backend option api_password taking it from above
    locations.

Notes:

1.  If your wallet is locked, rclone cannot unlock it automatically. You
    should either unlock it in advance by using Sia-UI or via command
    line siac wallet unlock. Alternatively you can make siad unlock your
    wallet automatically upon startup by running it with environment
    variable SIA_WALLET_PASSWORD.
2.  If siad cannot find the SIA_API_PASSWORD variable or the apipassword
    file in the SIA_DIR directory, it will generate a random password
    and store in the text file named apipassword under YOUR_HOME/.sia/
    directory on Unix or
    C:\Users\YOUR_HOME\AppData\Local\Sia\apipassword on Windows.
    Remember this when you configure password in rclone.
3.  The only way to use siad without API password is to run it on
    localhost with command line argument --authorize-api=false, but this
    is insecure and strongly discouraged.

Configuration

Here is an example of how to make a sia remote called mySia. First, run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> mySia
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    ...
    29 / Sia Decentralized Cloud
       \ "sia"
    ...
    Storage> sia
    Sia daemon API URL, like http://sia.daemon.host:9980.
    Note that siad must run with --disable-api-security to open API port for other hosts (not recommended).
    Keep default if Sia daemon runs on localhost.
    Enter a string value. Press Enter for the default ("http://127.0.0.1:9980").
    api_url> http://127.0.0.1:9980
    Sia Daemon API Password.
    Can be found in the apipassword file located in HOME/.sia/ or in the daemon directory.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank (default)
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    --------------------
    [mySia]
    type = sia
    api_url = http://127.0.0.1:9980
    api_password = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured, you can then use rclone like this:

-   List directories in top level of your Sia storage

        rclone lsd mySia:

-   List all the files in your Sia storage

        rclone ls mySia:

-   Upload a local directory to the Sia directory called backup

        rclone copy /home/source mySia:backup

Standard options

Here are the Standard options specific to sia (Sia Decentralized Cloud).

--sia-api-url

Sia daemon API URL, like http://sia.daemon.host:9980.

Note that siad must run with --disable-api-security to open API port for
other hosts (not recommended). Keep default if Sia daemon runs on
localhost.

Properties:

-   Config: api_url
-   Env Var: RCLONE_SIA_API_URL
-   Type: string
-   Default: "http://127.0.0.1:9980"

--sia-api-password

Sia Daemon API Password.

Can be found in the apipassword file located in HOME/.sia/ or in the
daemon directory.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: api_password
-   Env Var: RCLONE_SIA_API_PASSWORD
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to sia (Sia Decentralized Cloud).

--sia-user-agent

Siad User Agent

Sia daemon requires the 'Sia-Agent' user agent by default for security

Properties:

-   Config: user_agent
-   Env Var: RCLONE_SIA_USER_AGENT
-   Type: string
-   Default: "Sia-Agent"

--sia-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_SIA_ENCODING
-   Type: Encoding
-   Default: Slash,Question,Hash,Percent,Del,Ctl,InvalidUtf8,Dot

--sia-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SIA_DESCRIPTION
-   Type: string
-   Required: false

Limitations

-   Modification times not supported
-   Checksums not supported
-   rclone about not supported
-   rclone can work only with Siad or Sia-UI at the moment, the SkyNet
    daemon is not supported yet.
-   Sia does not allow control characters or symbols like question and
    pound signs in file names. rclone will transparently encode them for
    you, but you'd better be aware

Swift

Swift refers to OpenStack Object Storage. Commercial implementations of
that being:

-   Rackspace Cloud Files
-   Memset Memstore
-   OVH Object Storage
-   Oracle Cloud Storage
-   Blomp Cloud Storage
-   IBM Bluemix Cloud ObjectStorage Swift

Paths are specified as remote:container (or remote: for the lsd
command.) You may put subdirectories in too, e.g.
remote:container/path/to/dir.

Configuration

Here is an example of making a swift configuration. First run

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / OpenStack Swift (Rackspace Cloud Files, Blomp Cloud Storage, Memset Memstore, OVH)
       \ "swift"
    [snip]
    Storage> swift
    Get swift credentials from environment variables in standard OpenStack form.
    Choose a number from below, or type in your own value
     1 / Enter swift credentials in the next step
       \ "false"
     2 / Get swift credentials from environment vars. Leave other fields blank if using this.
       \ "true"
    env_auth> true
    User name to log in (OS_USERNAME).
    user> 
    API key or password (OS_PASSWORD).
    key> 
    Authentication URL for server (OS_AUTH_URL).
    Choose a number from below, or type in your own value
     1 / Rackspace US
       \ "https://auth.api.rackspacecloud.com/v1.0"
     2 / Rackspace UK
       \ "https://lon.auth.api.rackspacecloud.com/v1.0"
     3 / Rackspace v2
       \ "https://identity.api.rackspacecloud.com/v2.0"
     4 / Memset Memstore UK
       \ "https://auth.storage.memset.com/v1.0"
     5 / Memset Memstore UK v2
       \ "https://auth.storage.memset.com/v2.0"
     6 / OVH
       \ "https://auth.cloud.ovh.net/v3"
     7  / Blomp Cloud Storage
       \ "https://authenticate.ain.net"
    auth> 
    User ID to log in - optional - most swift systems use user and leave this blank (v3 auth) (OS_USER_ID).
    user_id> 
    User domain - optional (v3 auth) (OS_USER_DOMAIN_NAME)
    domain> 
    Tenant name - optional for v1 auth, this or tenant_id required otherwise (OS_TENANT_NAME or OS_PROJECT_NAME)
    tenant> 
    Tenant ID - optional for v1 auth, this or tenant required otherwise (OS_TENANT_ID)
    tenant_id> 
    Tenant domain - optional (v3 auth) (OS_PROJECT_DOMAIN_NAME)
    tenant_domain> 
    Region name - optional (OS_REGION_NAME)
    region> 
    Storage URL - optional (OS_STORAGE_URL)
    storage_url> 
    Auth Token from alternate authentication - optional (OS_AUTH_TOKEN)
    auth_token> 
    AuthVersion - optional - set to (1,2,3) if your auth URL has no version (ST_AUTH_VERSION)
    auth_version> 
    Endpoint type to choose from the service catalogue (OS_ENDPOINT_TYPE)
    Choose a number from below, or type in your own value
     1 / Public (default, choose this if not sure)
       \ "public"
     2 / Internal (use internal service net)
       \ "internal"
     3 / Admin
       \ "admin"
    endpoint_type> 
    Remote config
    --------------------
    [test]
    env_auth = true
    user = 
    key = 
    auth = 
    user_id = 
    domain = 
    tenant = 
    tenant_id = 
    tenant_domain = 
    region = 
    storage_url = 
    auth_token = 
    auth_version = 
    endpoint_type = 
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This remote is called remote and can now be used like this

See all containers

    rclone lsd remote:

Make a new container

    rclone mkdir remote:container

List the contents of a container

    rclone ls remote:container

Sync /home/local/directory to the remote container, deleting any excess
files in the container.

    rclone sync --interactive /home/local/directory remote:container

Configuration from an OpenStack credentials file

An OpenStack credentials file typically looks something something like
this (without the comments)

    export OS_AUTH_URL=https://a.provider.net/v2.0
    export OS_TENANT_ID=ffffffffffffffffffffffffffffffff
    export OS_TENANT_NAME="1234567890123456"
    export OS_USERNAME="123abc567xy"
    echo "Please enter your OpenStack Password: "
    read -sr OS_PASSWORD_INPUT
    export OS_PASSWORD=$OS_PASSWORD_INPUT
    export OS_REGION_NAME="SBG1"
    if [ -z "$OS_REGION_NAME" ]; then unset OS_REGION_NAME; fi

The config file needs to look something like this where $OS_USERNAME
represents the value of the OS_USERNAME variable - 123abc567xy in the
example above.

    [remote]
    type = swift
    user = $OS_USERNAME
    key = $OS_PASSWORD
    auth = $OS_AUTH_URL
    tenant = $OS_TENANT_NAME

Note that you may (or may not) need to set region too - try without
first.

Configuration from the environment

If you prefer you can configure rclone to use swift using a standard set
of OpenStack environment variables.

When you run through the config, make sure you choose true for env_auth
and leave everything else blank.

rclone will then set any empty config parameters from the environment
using standard OpenStack environment variables. There is a list of the
variables in the docs for the swift library.

Using an alternate authentication method

If your OpenStack installation uses a non-standard authentication method
that might not be yet supported by rclone or the underlying swift
library, you can authenticate externally (e.g. calling manually the
openstack commands to get a token). Then, you just need to pass the two
configuration variables auth_token and storage_url. If they are both
provided, the other variables are ignored. rclone will not try to
authenticate but instead assume it is already authenticated and use
these two variables to access the OpenStack installation.

Using rclone without a config file

You can use rclone with swift without a config file, if desired, like
this:

    source openstack-credentials-file
    export RCLONE_CONFIG_MYREMOTE_TYPE=swift
    export RCLONE_CONFIG_MYREMOTE_ENV_AUTH=true
    rclone lsd myremote:

--fast-list

This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.

--update and --use-server-modtime

As noted below, the modified time is stored on metadata on the object.
It is used by default for all operations that require checking the time
a file was last updated. It allows rclone to treat the remote more like
a true filesystem, but it is inefficient because it requires an extra
API call to retrieve the metadata.

For many operations, the time the object was last uploaded to the remote
is sufficient to determine if it is "dirty". By using --update along
with --use-server-modtime, you can avoid the extra API call and simply
upload files whose local modtime is newer than the time it was last
uploaded.

Modification times and hashes

The modified time is stored as metadata on the object as
X-Object-Meta-Mtime as floating point since the epoch accurate to 1 ns.

This is a de facto standard (used in the official python-swiftclient
amongst others) for storing the modification time for an object.

The MD5 hash algorithm is supported.

Restricted filename characters

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  /            0x2F        ／

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to swift (OpenStack Swift
(Rackspace Cloud Files, Blomp Cloud Storage, Memset Memstore, OVH)).

--swift-env-auth

Get swift credentials from environment variables in standard OpenStack
form.

Properties:

-   Config: env_auth
-   Env Var: RCLONE_SWIFT_ENV_AUTH
-   Type: bool
-   Default: false
-   Examples:
    -   "false"
        -   Enter swift credentials in the next step.
    -   "true"
        -   Get swift credentials from environment vars.
        -   Leave other fields blank if using this.

--swift-user

User name to log in (OS_USERNAME).

Properties:

-   Config: user
-   Env Var: RCLONE_SWIFT_USER
-   Type: string
-   Required: false

--swift-key

API key or password (OS_PASSWORD).

Properties:

-   Config: key
-   Env Var: RCLONE_SWIFT_KEY
-   Type: string
-   Required: false

--swift-auth

Authentication URL for server (OS_AUTH_URL).

Properties:

-   Config: auth
-   Env Var: RCLONE_SWIFT_AUTH
-   Type: string
-   Required: false
-   Examples:
    -   "https://auth.api.rackspacecloud.com/v1.0"
        -   Rackspace US
    -   "https://lon.auth.api.rackspacecloud.com/v1.0"
        -   Rackspace UK
    -   "https://identity.api.rackspacecloud.com/v2.0"
        -   Rackspace v2
    -   "https://auth.storage.memset.com/v1.0"
        -   Memset Memstore UK
    -   "https://auth.storage.memset.com/v2.0"
        -   Memset Memstore UK v2
    -   "https://auth.cloud.ovh.net/v3"
        -   OVH
    -   "https://authenticate.ain.net"
        -   Blomp Cloud Storage

--swift-user-id

User ID to log in - optional - most swift systems use user and leave
this blank (v3 auth) (OS_USER_ID).

Properties:

-   Config: user_id
-   Env Var: RCLONE_SWIFT_USER_ID
-   Type: string
-   Required: false

--swift-domain

User domain - optional (v3 auth) (OS_USER_DOMAIN_NAME)

Properties:

-   Config: domain
-   Env Var: RCLONE_SWIFT_DOMAIN
-   Type: string
-   Required: false

--swift-tenant

Tenant name - optional for v1 auth, this or tenant_id required otherwise
(OS_TENANT_NAME or OS_PROJECT_NAME).

Properties:

-   Config: tenant
-   Env Var: RCLONE_SWIFT_TENANT
-   Type: string
-   Required: false

--swift-tenant-id

Tenant ID - optional for v1 auth, this or tenant required otherwise
(OS_TENANT_ID).

Properties:

-   Config: tenant_id
-   Env Var: RCLONE_SWIFT_TENANT_ID
-   Type: string
-   Required: false

--swift-tenant-domain

Tenant domain - optional (v3 auth) (OS_PROJECT_DOMAIN_NAME).

Properties:

-   Config: tenant_domain
-   Env Var: RCLONE_SWIFT_TENANT_DOMAIN
-   Type: string
-   Required: false

--swift-region

Region name - optional (OS_REGION_NAME).

Properties:

-   Config: region
-   Env Var: RCLONE_SWIFT_REGION
-   Type: string
-   Required: false

--swift-storage-url

Storage URL - optional (OS_STORAGE_URL).

Properties:

-   Config: storage_url
-   Env Var: RCLONE_SWIFT_STORAGE_URL
-   Type: string
-   Required: false

--swift-auth-token

Auth Token from alternate authentication - optional (OS_AUTH_TOKEN).

Properties:

-   Config: auth_token
-   Env Var: RCLONE_SWIFT_AUTH_TOKEN
-   Type: string
-   Required: false

--swift-application-credential-id

Application Credential ID (OS_APPLICATION_CREDENTIAL_ID).

Properties:

-   Config: application_credential_id
-   Env Var: RCLONE_SWIFT_APPLICATION_CREDENTIAL_ID
-   Type: string
-   Required: false

--swift-application-credential-name

Application Credential Name (OS_APPLICATION_CREDENTIAL_NAME).

Properties:

-   Config: application_credential_name
-   Env Var: RCLONE_SWIFT_APPLICATION_CREDENTIAL_NAME
-   Type: string
-   Required: false

--swift-application-credential-secret

Application Credential Secret (OS_APPLICATION_CREDENTIAL_SECRET).

Properties:

-   Config: application_credential_secret
-   Env Var: RCLONE_SWIFT_APPLICATION_CREDENTIAL_SECRET
-   Type: string
-   Required: false

--swift-auth-version

AuthVersion - optional - set to (1,2,3) if your auth URL has no version
(ST_AUTH_VERSION).

Properties:

-   Config: auth_version
-   Env Var: RCLONE_SWIFT_AUTH_VERSION
-   Type: int
-   Default: 0

--swift-endpoint-type

Endpoint type to choose from the service catalogue (OS_ENDPOINT_TYPE).

Properties:

-   Config: endpoint_type
-   Env Var: RCLONE_SWIFT_ENDPOINT_TYPE
-   Type: string
-   Default: "public"
-   Examples:
    -   "public"
        -   Public (default, choose this if not sure)
    -   "internal"
        -   Internal (use internal service net)
    -   "admin"
        -   Admin

--swift-storage-policy

The storage policy to use when creating a new container.

This applies the specified storage policy when creating a new container.
The policy cannot be changed afterwards. The allowed configuration
values and their meaning depend on your Swift storage provider.

Properties:

-   Config: storage_policy
-   Env Var: RCLONE_SWIFT_STORAGE_POLICY
-   Type: string
-   Required: false
-   Examples:
    -   ""
        -   Default
    -   "pcs"
        -   OVH Public Cloud Storage
    -   "pca"
        -   OVH Public Cloud Archive

Advanced options

Here are the Advanced options specific to swift (OpenStack Swift
(Rackspace Cloud Files, Blomp Cloud Storage, Memset Memstore, OVH)).

--swift-leave-parts-on-error

If true avoid calling abort upload on a failure.

It should be set to true for resuming uploads across different sessions.

Properties:

-   Config: leave_parts_on_error
-   Env Var: RCLONE_SWIFT_LEAVE_PARTS_ON_ERROR
-   Type: bool
-   Default: false

--swift-fetch-until-empty-page

When paginating, always fetch unless we received an empty page.

Consider using this option if rclone listings show fewer objects than
expected, or if repeated syncs copy unchanged objects.

It is safe to enable this, but rclone may make more API calls than
necessary.

This is one of a pair of workarounds to handle implementations of the
Swift API that do not implement pagination as expected. See also
"partial_page_fetch_threshold".

Properties:

-   Config: fetch_until_empty_page
-   Env Var: RCLONE_SWIFT_FETCH_UNTIL_EMPTY_PAGE
-   Type: bool
-   Default: false

--swift-partial-page-fetch-threshold

When paginating, fetch if the current page is within this percentage of
the limit.

Consider using this option if rclone listings show fewer objects than
expected, or if repeated syncs copy unchanged objects.

It is safe to enable this, but rclone may make more API calls than
necessary.

This is one of a pair of workarounds to handle implementations of the
Swift API that do not implement pagination as expected. See also
"fetch_until_empty_page".

Properties:

-   Config: partial_page_fetch_threshold
-   Env Var: RCLONE_SWIFT_PARTIAL_PAGE_FETCH_THRESHOLD
-   Type: int
-   Default: 0

--swift-chunk-size

Above this size files will be chunked.

Above this size files will be chunked into a _segments container or a
.file-segments directory. (See the use_segments_container option for
more info). Default for this is 5 GiB which is its maximum value, which
means only files above this size will be chunked.

Rclone uploads chunked files as dynamic large objects (DLO).

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_SWIFT_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 5Gi

--swift-no-chunk

Don't chunk files during streaming upload.

When doing streaming uploads (e.g. using rcat or mount with
--vfs-cache-mode off) setting this flag will cause the swift backend to
not upload chunked files.

This will limit the maximum streamed upload size to 5 GiB. This is
useful because non chunked files are easier to deal with and have an
MD5SUM.

Rclone will still chunk files bigger than chunk_size when doing normal
copy operations.

Properties:

-   Config: no_chunk
-   Env Var: RCLONE_SWIFT_NO_CHUNK
-   Type: bool
-   Default: false

--swift-no-large-objects

Disable support for static and dynamic large objects

Swift cannot transparently store files bigger than 5 GiB. There are two
schemes for chunking large files, static large objects (SLO) or dynamic
large objects (DLO), and the API does not allow rclone to determine
whether a file is a static or dynamic large object without doing a HEAD
on the object. Since these need to be treated differently, this means
rclone has to issue HEAD requests for objects for example when reading
checksums.

When no_large_objects is set, rclone will assume that there are no
static or dynamic large objects stored. This means it can stop doing the
extra HEAD calls which in turn increases performance greatly especially
when doing a swift to swift transfer with --checksum set.

Setting this option implies no_chunk and also that no files will be
uploaded in chunks, so files bigger than 5 GiB will just fail on upload.

If you set this option and there are static or dynamic large objects,
then this will give incorrect hashes for them. Downloads will succeed,
but other operations such as Remove and Copy will fail.

Properties:

-   Config: no_large_objects
-   Env Var: RCLONE_SWIFT_NO_LARGE_OBJECTS
-   Type: bool
-   Default: false

--swift-use-segments-container

Choose destination for large object segments

Swift cannot transparently store files bigger than 5 GiB and rclone will
chunk files larger than chunk_size (default 5 GiB) in order to upload
them.

If this value is true the chunks will be stored in an additional
container named the same as the destination container but with _segments
appended. This means that there won't be any duplicated data in the
original container but having another container may not be acceptable.

If this value is false the chunks will be stored in a .file-segments
directory in the root of the container. This directory will be omitted
when listing the container. Some providers (eg Blomp) require this mode
as creating additional containers isn't allowed. If it is desired to see
the .file-segments directory in the root then this flag must be set to
true.

If this value is unset (the default), then rclone will choose the value
to use. It will be false unless rclone detects any auth_urls that it
knows need it to be true. In this case you'll see a message in the DEBUG
log.

Properties:

-   Config: use_segments_container
-   Env Var: RCLONE_SWIFT_USE_SEGMENTS_CONTAINER
-   Type: Tristate
-   Default: unset

--swift-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_SWIFT_ENCODING
-   Type: Encoding
-   Default: Slash,InvalidUtf8

--swift-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SWIFT_DESCRIPTION
-   Type: string
-   Required: false

Limitations

The Swift API doesn't return a correct MD5SUM for segmented files
(Dynamic or Static Large Objects) so rclone won't check or use the
MD5SUM for these.

Troubleshooting

Rclone gives Failed to create file system for "remote:": Bad Request

Due to an oddity of the underlying swift library, it gives a "Bad
Request" error rather than a more sensible error when the authentication
fails for Swift.

So this most likely means your username / password is wrong. You can
investigate further with the --dump-bodies flag.

This may also be caused by specifying the region when you shouldn't have
(e.g. OVH).

Rclone gives Failed to create file system: Response didn't have storage url and auth token

This is most likely caused by forgetting to specify your tenant when
setting up a swift remote.

OVH Cloud Archive

To use rclone with OVH cloud archive, first use rclone config to set up
a swift backend with OVH, choosing pca as the storage_policy.

Uploading Objects

Uploading objects to OVH cloud archive is no different to object
storage, you just simply run the command you like (move, copy or sync)
to upload the objects. Once uploaded the objects will show in a "Frozen"
state within the OVH control panel.

Retrieving Objects

To retrieve objects use rclone copy as normal. If the objects are in a
frozen state then rclone will ask for them all to be unfrozen and it
will wait at the end of the output with a message like the following:

    2019/03/23 13:06:33 NOTICE: Received retry after error - sleeping until 2019-03-23T13:16:33.481657164+01:00 (9m59.99985121s)

Rclone will wait for the time specified then retry the copy.

pCloud

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

The initial setup for pCloud involves getting a token from pCloud which
you need to do in your browser. rclone config walks you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Pcloud
       \ "pcloud"
    [snip]
    Storage> pcloud
    Pcloud App Client Id - leave blank normally.
    client_id> 
    Pcloud App Client Secret - leave blank normally.
    client_secret> 
    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: pcloud
    - client_id:
    - client_secret:
    - token: {"access_token":"XXX","token_type":"bearer","expiry":"0001-01-01T00:00:00Z"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note if you are using remote config with rclone authorize while your
pcloud server is the EU region, you will need to set the hostname in
'Edit advanced config', otherwise you might get a token error.

Note that rclone runs a webserver on your local machine to collect the
token as returned from pCloud. This only runs from the moment it opens
your browser to the moment you get back the verification code. This is
on http://127.0.0.1:53682/ and this it may require you to unblock it
temporarily if you are running a host firewall.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your pCloud

    rclone lsd remote:

List all the files in your pCloud

    rclone ls remote:

To copy a local directory to a pCloud directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

pCloud allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not. In order to set a Modification time pCloud requires the object be
re-uploaded.

pCloud supports MD5 and SHA1 hashes in the US region, and SHA1 and
SHA256 hashes in the EU region, so you can use the --checksum flag.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Deleting files

Deleted files will be moved to the trash. Your subscription level will
determine how long items stay in the trash. rclone cleanup can be used
to empty the trash.

Emptying the trash

Due to an API limitation, the rclone cleanup command will only work if
you set your username and password in the advanced options for this
backend. Since we generally want to avoid storing user passwords in the
rclone config file, we advise you to only set this up if you need the
rclone cleanup command to work.

Root folder ID

You can set the root_folder_id for rclone. This is the directory
(identified by its Folder ID) that rclone considers to be the root of
your pCloud drive.

Normally you will leave this blank and rclone will determine the correct
root to use itself.

However you can set this to restrict rclone to a specific folder
hierarchy.

In order to do this you will have to find the Folder ID of the directory
you wish rclone to display. This can be accomplished by executing the
rclone lsf command using a basic configuration setup that does not
include the root_folder_id parameter.

The command will enumerate available directories, allowing you to locate
the appropriate Folder ID for subsequent use.

Example:

    $ rclone lsf --dirs-only -Fip --csv TestPcloud:
    dxxxxxxxx2,My Music/
    dxxxxxxxx3,My Pictures/
    dxxxxxxxx4,My Videos/

So if the folder you want rclone to use your is "My Music/", then use
the returned id from rclone lsf command (ex. dxxxxxxxx2) as the
root_folder_id variable value in the config file.

Change notifications and mounts

The pCloud backend supports real‑time updates for rclone mounts via
change notifications. rclone uses pCloud’s diff long‑polling API to
detect changes and will automatically refresh directory listings in the
mounted filesystem when changes occur.

Notes and behavior:

-   Works automatically when using rclone mount and requires no
    additional configuration.
-   Notifications are directory‑scoped: when rclone detects a change, it
    refreshes the affected directory so new/removed/renamed files become
    visible promptly.
-   Updates are near real‑time. The backend uses a long‑poll with short
    fallback polling intervals, so you should see changes appear quickly
    without manual refreshes.

If you want to debug or verify notifications, you can use the helper
command:

    rclone test changenotify remote:

This will log incoming change notifications for the given remote.

Standard options

Here are the Standard options specific to pcloud (Pcloud).

--pcloud-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_PCLOUD_CLIENT_ID
-   Type: string
-   Required: false

--pcloud-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_PCLOUD_CLIENT_SECRET
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to pcloud (Pcloud).

--pcloud-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_PCLOUD_TOKEN
-   Type: string
-   Required: false

--pcloud-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_PCLOUD_AUTH_URL
-   Type: string
-   Required: false

--pcloud-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_PCLOUD_TOKEN_URL
-   Type: string
-   Required: false

--pcloud-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_PCLOUD_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--pcloud-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_PCLOUD_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--pcloud-root-folder-id

Fill in for rclone to use a non root folder as its starting point.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_PCLOUD_ROOT_FOLDER_ID
-   Type: string
-   Default: "d0"

--pcloud-hostname

Hostname to connect to.

This is normally set when rclone initially does the oauth connection,
however you will need to set it by hand if you are using remote config
with rclone authorize.

Properties:

-   Config: hostname
-   Env Var: RCLONE_PCLOUD_HOSTNAME
-   Type: string
-   Default: "api.pcloud.com"
-   Examples:
    -   "api.pcloud.com"
        -   Original/US region
    -   "eapi.pcloud.com"
        -   EU region

--pcloud-username

Your pcloud username.

This is only required when you want to use the cleanup command. Due to a
bug in the pcloud API the required API does not support OAuth
authentication so we have to rely on user password authentication for
it.

Properties:

-   Config: username
-   Env Var: RCLONE_PCLOUD_USERNAME
-   Type: string
-   Required: false

--pcloud-password

Your pcloud password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_PCLOUD_PASSWORD
-   Type: string
-   Required: false

--pcloud-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_PCLOUD_DESCRIPTION
-   Type: string
-   Required: false

PikPak

PikPak is a private cloud drive.

Paths are specified as remote:path, and may be as deep as required, e.g.
remote:directory/subdirectory.

Configuration

Here is an example of making a remote for PikPak.

First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n

    Enter name for new remote.
    name> remote

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    XX / PikPak
       \ (pikpak)
    Storage> XX

    Option user.
    Pikpak username.
    Enter a value.
    user> USERNAME

    Option pass.
    Pikpak password.
    Choose an alternative below.
    y) Yes, type in my own password
    g) Generate random password
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> 

    Configuration complete.
    Options:
    - type: pikpak
    - user: USERNAME
    - pass: *** ENCRYPTED ***
    - token: {"access_token":"eyJ...","token_type":"Bearer","refresh_token":"os...","expiry":"2023-01-26T18:54:32.170582647+09:00"}
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Modification times and hashes

PikPak keeps modification times on objects, and updates them when
uploading objects, but it does not support changing only the
modification time

The MD5 hash algorithm is supported.

Standard options

Here are the Standard options specific to pikpak (PikPak).

--pikpak-user

Pikpak username.

Properties:

-   Config: user
-   Env Var: RCLONE_PIKPAK_USER
-   Type: string
-   Required: true

--pikpak-pass

Pikpak password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_PIKPAK_PASS
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to pikpak (PikPak).

--pikpak-device-id

Device ID used for authorization.

Properties:

-   Config: device_id
-   Env Var: RCLONE_PIKPAK_DEVICE_ID
-   Type: string
-   Required: false

--pikpak-user-agent

HTTP user agent for pikpak.

Defaults to "Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:129.0)
Gecko/20100101 Firefox/129.0" or "--pikpak-user-agent" provided on
command line.

Properties:

-   Config: user_agent
-   Env Var: RCLONE_PIKPAK_USER_AGENT
-   Type: string
-   Default: "Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:129.0)
    Gecko/20100101 Firefox/129.0"

--pikpak-root-folder-id

ID of the root folder. Leave blank normally.

Fill in for rclone to use a non root folder as its starting point.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_PIKPAK_ROOT_FOLDER_ID
-   Type: string
-   Required: false

--pikpak-use-trash

Send files to the trash instead of deleting permanently.

Defaults to true, namely sending files to the trash. Use
--pikpak-use-trash=false to delete files permanently instead.

Properties:

-   Config: use_trash
-   Env Var: RCLONE_PIKPAK_USE_TRASH
-   Type: bool
-   Default: true

--pikpak-trashed-only

Only show files that are in the trash.

This will show trashed files in their original directory structure.

Properties:

-   Config: trashed_only
-   Env Var: RCLONE_PIKPAK_TRASHED_ONLY
-   Type: bool
-   Default: false

--pikpak-no-media-link

Use original file links instead of media links.

This avoids issues caused by invalid media links, but may reduce
download speeds.

Properties:

-   Config: no_media_link
-   Env Var: RCLONE_PIKPAK_NO_MEDIA_LINK
-   Type: bool
-   Default: false

--pikpak-hash-memory-limit

Files bigger than this will be cached on disk to calculate hash if
required.

Properties:

-   Config: hash_memory_limit
-   Env Var: RCLONE_PIKPAK_HASH_MEMORY_LIMIT
-   Type: SizeSuffix
-   Default: 10Mi

--pikpak-upload-cutoff

Cutoff for switching to chunked upload.

Any files larger than this will be uploaded in chunks of chunk_size. The
minimum is 0 and the maximum is 5 GiB.

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_PIKPAK_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 200Mi

--pikpak-chunk-size

Chunk size for multipart uploads.

Large files will be uploaded in chunks of this size.

Note that this is stored in memory and there may be up to
"--transfers" * "--pikpak-upload-concurrency" chunks stored at once in
memory.

If you are transferring large files over high-speed links and you have
enough memory, then increasing this will speed up the transfers.

Rclone will automatically increase the chunk size when uploading a large
file of known size to stay below the 10,000 chunks limit.

Increasing the chunk size decreases the accuracy of the progress
statistics displayed with "-P" flag.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_PIKPAK_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 5Mi

--pikpak-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded
concurrently for multipart uploads.

Note that chunks are stored in memory and there may be up to
"--transfers" * "--pikpak-upload-concurrency" chunks stored at once in
memory.

If you are uploading small numbers of large files over high-speed links
and these uploads do not fully utilize your bandwidth, then increasing
this may help to speed up the transfers.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_PIKPAK_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 4

--pikpak-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_PIKPAK_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,LeftSpace,RightSpace,RightPeriod,InvalidUtf8,Dot

--pikpak-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_PIKPAK_DESCRIPTION
-   Type: string
-   Required: false

Backend commands

Here are the commands specific to the pikpak backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

addurl

Add offline download task for url.

    rclone backend addurl remote: [options] [<arguments>+]

This command adds offline download task for url.

Usage examples:

    rclone backend addurl pikpak:dirpath url
    rclone backend addurl pikpak:dirpath url -o name=custom_filename.zip

Downloads will be stored in 'dirpath'. If 'dirpath' is invalid, download
will fallback to default 'My Pack' folder.

Options:

-   "name": Custom filename for the downloaded file.

decompress

Request decompress of a file/files in a folder.

    rclone backend decompress remote: [options] [<arguments>+]

This command requests decompress of file/files in a folder.

Usage examples:

    rclone backend decompress pikpak:dirpath {filename} -o password=password
    rclone backend decompress pikpak:dirpath {filename} -o delete-src-file

An optional argument 'filename' can be specified for a file located in
'pikpak:dirpath'. You may want to pass '-o password=password' for a
password-protected files. Also, pass '-o delete-src-file' to delete
source files after decompression finished.

Result:

    {
        "Decompressed": 17,
        "SourceDeleted": 0,
        "Errors": 0
    }

Limitations

Hashes may be empty

PikPak supports MD5 hash, but sometimes given empty especially for
user-uploaded files.

Deleted files still visible with trashed-only

Deleted files will still be visible with --pikpak-trashed-only even
after the trash emptied. This goes away after few days.

Pixeldrain

This is the backend for Pixeldrain's premium filesystem feature. This is
not the same as pixeldrain's free file sharing product. The filesystem
requires either a Pro subscription or the Prepaid plan. More information
on subscriptions.

An overview of the filesystem's features and limitations is available in
the filesystem guide on pixeldrain.

Usage with account

To use the personal filesystem you will need a pixeldrain account and
either the Prepaid plan or one of the Patreon-based subscriptions. After
registering and subscribing, your personal filesystem will be available
at this link: https://pixeldrain.com/d/me.

Go to the API keys page on your account and generate a new API key for
rclone. Then run rclone config and use the API key to create a new
backend.

Example:

    No remotes found, make a new one\?
    n) New remote
    d) Delete remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    n/d/c/s/q> n

    Enter name for new remote.
    name> pixeldrainfs

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    ...
    XX / Pixeldrain Filesystem
       \ (pixeldrain)
    ...
    Storage> pixeldrain

    Option api_key.
    API key for your pixeldrain account.
    Found on https://pixeldrain.com/user/api_keys.
    Enter a value. Press Enter to leave empty.
    api_key> b1bb1e81-9b7b-406b-986a-c9b20be76e15

    Option directory_id.
    Root of the filesystem to use. Set to 'me' to use your personal filesystem.
    Set to a shared directory ID to use a shared directory.
    Enter a string value. Press Enter for the default (me).
    directory_id>

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n>

    Configuration complete.
    Options:
    - type: pixeldrain
    - api_key: b1bb1e81-9b7b-406b-986a-c9b20be76e15
    Keep this "pixeldrainfs" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d>

    Current remotes:

    Name                 Type
    ====                 ====
    pixeldrainfs         pixeldrain

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q

Usage without account

It is possible to gain read-only access to publicly shared directories
through rclone. For this you only need a directory ID. The directory ID
can be found in the URL of a shared directory, the URL will look like
this https://pixeldrain.com/d/abcd1234 where abcd1234 is the directory
ID. Directory IDs in your own filesystem can also be listed with the lsf
command:

rclone lsf Pixeldrain: --dirs-only -Fpi

This will print directories in your Pixeldrain home directory and their
public IDs.

Enter this directory ID in the rclone config and you will be able to
access the directory.

Standard options

Here are the Standard options specific to pixeldrain (Pixeldrain
Filesystem).

--pixeldrain-api-key

API key for your pixeldrain account. Found on
https://pixeldrain.com/user/api_keys.

Properties:

-   Config: api_key
-   Env Var: RCLONE_PIXELDRAIN_API_KEY
-   Type: string
-   Required: false

--pixeldrain-root-folder-id

Root of the filesystem to use.

Set to 'me' to use your personal filesystem. Set to a shared directory
ID to use a shared directory.

Properties:

-   Config: root_folder_id
-   Env Var: RCLONE_PIXELDRAIN_ROOT_FOLDER_ID
-   Type: string
-   Default: "me"

Advanced options

Here are the Advanced options specific to pixeldrain (Pixeldrain
Filesystem).

--pixeldrain-api-url

The API endpoint to connect to. In the vast majority of cases it's fine
to leave this at default. It is only intended to be changed for testing
purposes.

Properties:

-   Config: api_url
-   Env Var: RCLONE_PIXELDRAIN_API_URL
-   Type: string
-   Default: "https://pixeldrain.com/api"

--pixeldrain-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_PIXELDRAIN_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Pixeldrain supports file modes and creation times.

Here are the possible system metadata items for the pixeldrain backend.

  -------------------------------------------------------------------------------------------------
  Name        Help           Type        Example                               Read Only
  ----------- -------------- ----------- ------------------------------------- --------------------
  btime       Time of file   RFC 3339    2006-01-02T15:04:05.999999999Z07:00   N
              birth                                                            
              (creation)                                                       

  mode        File mode      octal, unix 755                                   N
                             style                                             

  mtime       Time of last   RFC 3339    2006-01-02T15:04:05.999999999Z07:00   N
              modification                                                     
  -------------------------------------------------------------------------------------------------

See the metadata docs for more info.

premiumize.me

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

The initial setup for premiumize.me involves getting a token from
premiumize.me which you need to do in your browser. rclone config walks
you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / premiumize.me
       \ "premiumizeme"
    [snip]
    Storage> premiumizeme
    ** See help for premiumizeme backend at: https://rclone.org/premiumizeme/ **

    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: premiumizeme
    - token: {"access_token":"XXX","token_type":"Bearer","refresh_token":"XXX","expiry":"2029-08-07T18:44:15.548915378+01:00"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> 

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from premiumize.me. This only runs from the moment it
opens your browser to the moment you get back the verification code.
This is on http://127.0.0.1:53682/ and this it may require you to
unblock it temporarily if you are running a host firewall.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your premiumize.me

    rclone lsd remote:

List all the files in your premiumize.me

    rclone ls remote:

To copy a local directory to an premiumize.me directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

premiumize.me does not support modification times or hashes, therefore
syncing will default to --size-only checking. Note that using --update
will work.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼
  "            0x22        ＂

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to premiumizeme (premiumize.me).

--premiumizeme-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_PREMIUMIZEME_CLIENT_ID
-   Type: string
-   Required: false

--premiumizeme-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_PREMIUMIZEME_CLIENT_SECRET
-   Type: string
-   Required: false

--premiumizeme-api-key

API Key.

This is not normally used - use oauth instead.

Properties:

-   Config: api_key
-   Env Var: RCLONE_PREMIUMIZEME_API_KEY
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to premiumizeme (premiumize.me).

--premiumizeme-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_PREMIUMIZEME_TOKEN
-   Type: string
-   Required: false

--premiumizeme-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_PREMIUMIZEME_AUTH_URL
-   Type: string
-   Required: false

--premiumizeme-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_PREMIUMIZEME_TOKEN_URL
-   Type: string
-   Required: false

--premiumizeme-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_PREMIUMIZEME_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--premiumizeme-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_PREMIUMIZEME_ENCODING
-   Type: Encoding
-   Default: Slash,DoubleQuote,BackSlash,Del,Ctl,InvalidUtf8,Dot

--premiumizeme-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_PREMIUMIZEME_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Note that premiumize.me is case insensitive so you can't have a file
called "Hello.doc" and one called "hello.doc".

premiumize.me file names can't have the \ or " characters in. rclone
maps these to and from an identical looking unicode equivalents ＼ and
＂

premiumize.me only supports filenames up to 255 characters in length.

Proton Drive

Proton Drive is an end-to-end encrypted Swiss vault for your files that
protects your data.

This is an rclone backend for Proton Drive which supports the file
transfer features of Proton Drive using the same client-side encryption.

Due to the fact that Proton Drive doesn't publish its API documentation,
this backend is implemented with best efforts by reading the
open-sourced client source code and observing the Proton Drive traffic
in the browser.

NB This backend is currently in Beta. It is believed to be correct and
all the integration tests pass. However the Proton Drive protocol has
evolved over time there may be accounts it is not compatible with.
Please post on the rclone forum if you find an incompatibility.

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configurations

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Proton Drive
       \ "protondrive"
    [snip]
    Storage> protondrive
    User name
    user> you@protonmail.com
    Password.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Option 2fa.
    2FA code (if the account requires one)
    Enter a value. Press Enter to leave empty.
    2fa> 123456
    Remote config
    Configuration complete.
    Options:
    - type: protondrive
    - user: you@protonmail.com
    - pass: *** ENCRYPTED ***
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

NOTE: The Proton Drive encryption keys need to have been already
generated after a regular login via the browser, otherwise attempting to
use the credentials in rclone will fail.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your Proton Drive

    rclone lsd remote:

List all the files in your Proton Drive

    rclone ls remote:

To copy a local directory to an Proton Drive directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

Proton Drive Bridge does not support updating modification times yet.

The SHA1 hash algorithm is supported.

Restricted filename characters

Invalid UTF-8 bytes will be replaced, also left and right spaces will be
removed (code reference)

Duplicated files

Proton Drive can not have two files with exactly the same name and path.
If the conflict occurs, depending on the advanced config, the file might
or might not be overwritten.

Mailbox password

Please set your mailbox password in the advanced config section.

Caching

The cache is currently built for the case when the rclone is the only
instance performing operations to the mount point. The event system,
which is the proton API system that provides visibility of what has
changed on the drive, is yet to be implemented, so updates from other
clients won’t be reflected in the cache. Thus, if there are concurrent
clients accessing the same mount point, then we might have a problem
with caching the stale data.

Standard options

Here are the Standard options specific to protondrive (Proton Drive).

--protondrive-username

The username of your proton account

Properties:

-   Config: username
-   Env Var: RCLONE_PROTONDRIVE_USERNAME
-   Type: string
-   Required: true

--protondrive-password

The password of your proton account.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_PROTONDRIVE_PASSWORD
-   Type: string
-   Required: true

--protondrive-2fa

The 2FA code

The value can also be provided with --protondrive-2fa=000000

The 2FA code of your proton drive account if the account is set up with
two-factor authentication

Properties:

-   Config: 2fa
-   Env Var: RCLONE_PROTONDRIVE_2FA
-   Type: string
-   Required: false

--protondrive-otp-secret-key

The OTP secret key

The value can also be provided with
--protondrive-otp-secret-key=ABCDEFGHIJKLMNOPQRSTUVWXYZ234567

The OTP secret key of your proton drive account if the account is set up
with two-factor authentication

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: otp_secret_key
-   Env Var: RCLONE_PROTONDRIVE_OTP_SECRET_KEY
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to protondrive (Proton Drive).

--protondrive-mailbox-password

The mailbox password of your two-password proton account.

For more information regarding the mailbox password, please check the
following official knowledge base article:
https://proton.me/support/the-difference-between-the-mailbox-password-and-login-password

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: mailbox_password
-   Env Var: RCLONE_PROTONDRIVE_MAILBOX_PASSWORD
-   Type: string
-   Required: false

--protondrive-client-uid

Client uid key (internal use only)

Properties:

-   Config: client_uid
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_UID
-   Type: string
-   Required: false

--protondrive-client-access-token

Client access token key (internal use only)

Properties:

-   Config: client_access_token
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_ACCESS_TOKEN
-   Type: string
-   Required: false

--protondrive-client-refresh-token

Client refresh token key (internal use only)

Properties:

-   Config: client_refresh_token
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_REFRESH_TOKEN
-   Type: string
-   Required: false

--protondrive-client-salted-key-pass

Client salted key pass key (internal use only)

Properties:

-   Config: client_salted_key_pass
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_SALTED_KEY_PASS
-   Type: string
-   Required: false

--protondrive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_PROTONDRIVE_ENCODING
-   Type: Encoding
-   Default: Slash,LeftSpace,RightSpace,InvalidUtf8,Dot

--protondrive-original-file-size

Return the file size before encryption

The size of the encrypted file will be different from (bigger than) the
original file size. Unless there is a reason to return the file size
after encryption is performed, otherwise, set this option to true, as
features like Open() which will need to be supplied with original
content size, will fail to operate properly

Properties:

-   Config: original_file_size
-   Env Var: RCLONE_PROTONDRIVE_ORIGINAL_FILE_SIZE
-   Type: bool
-   Default: true

--protondrive-app-version

The app version string

            The app version string identifies the client that is currently performing
            the API request. Third-party Proton Drive integrations should use the form
            external-drive-<project>@<version>. If this option is left empty, rclone
            derives a compliant value from its own version. This value is sent with
            every API request; the option itself is optional.

Properties:

-   Config: app_version
-   Env Var: RCLONE_PROTONDRIVE_APP_VERSION
-   Type: string
-   Required: false

--protondrive-replace-existing-draft

Create a new revision when filename conflict is detected

When a file upload is cancelled or failed before completion, a draft
will be created and the subsequent upload of the same file to the same
location will be reported as a conflict.

The value can also be set by --protondrive-replace-existing-draft=true

If the option is set to true, the draft will be replaced and then the
upload operation will restart. If there are other clients also uploading
at the same file location at the same time, the behavior is currently
unknown. Need to set to true for integration tests. If the option is set
to false, an error "a draft exist - usually this means a file is being
uploaded at another client, or, there was a failed upload attempt" will
be returned, and no upload will happen.

Properties:

-   Config: replace_existing_draft
-   Env Var: RCLONE_PROTONDRIVE_REPLACE_EXISTING_DRAFT
-   Type: bool
-   Default: false

--protondrive-enable-caching

Caches the files and folders metadata to reduce API calls

Notice: If you are mounting ProtonDrive as a VFS, please disable this
feature, as the current implementation doesn't update or clear the cache
when there are external changes.

The files and folders on ProtonDrive are represented as links with
keyrings, which can be cached to improve performance and be friendly to
the API server.

The cache is currently built for the case when the rclone is the only
instance performing operations to the mount point. The event system,
which is the proton API system that provides visibility of what has
changed on the drive, is yet to be implemented, so updates from other
clients won’t be reflected in the cache. Thus, if there are concurrent
clients accessing the same mount point, then we might have a problem
with caching the stale data.

Properties:

-   Config: enable_caching
-   Env Var: RCLONE_PROTONDRIVE_ENABLE_CACHING
-   Type: bool
-   Default: true

--protondrive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_PROTONDRIVE_DESCRIPTION
-   Type: string
-   Required: false

Limitations

This backend uses the Proton-API-Bridge, which is based on
go-proton-api, a fork of the official repo.

There is no official API documentation available from Proton Drive. But,
thanks to Proton open sourcing proton-go-api and the web, iOS, and
Android client codebases, we don't need to completely reverse engineer
the APIs by observing the web client traffic!

proton-go-api provides the basic building blocks of API calls and error
handling, such as 429 exponential back-off, but it is pretty much just a
barebone interface to the Proton API. For example, the encryption and
decryption of the Proton Drive file are not provided in this library.

The Proton-API-Bridge, attempts to bridge the gap, so rclone can be
built on top of this quickly. This codebase handles the intricate tasks
before and after calling Proton APIs, particularly the complex
encryption scheme, allowing developers to implement features for other
software on top of this codebase. There are likely quite a few errors in
this library, as there isn't official documentation available.

put.io

Paths are specified as remote:path

put.io paths may be as deep as required, e.g.
remote:directory/subdirectory.

Configuration

The initial setup for put.io involves getting a token from put.io which
you need to do in your browser. rclone config walks you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> putio
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Put.io
       \ "putio"
    [snip]
    Storage> putio
    ** See help for putio backend at: https://rclone.org/putio/ **

    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    --------------------
    [putio]
    type = putio
    token = {"access_token":"XXXXXXXX","expiry":"0001-01-01T00:00:00Z"}
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:

    Name                 Type
    ====                 ====
    putio                putio

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from put.io if using web browser to automatically
authenticate. This only runs from the moment it opens your browser to
the moment you get back the verification code. This is on
http://127.0.0.1:53682/ and this it may require you to unblock it
temporarily if you are running a host firewall, or use manual mode.

You can then use it like this,

List directories in top level of your put.io

    rclone lsd remote:

List all the files in your put.io

    rclone ls remote:

To copy a local directory to a put.io directory called backup

    rclone copy /home/source remote:backup

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to putio (Put.io).

--putio-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_PUTIO_CLIENT_ID
-   Type: string
-   Required: false

--putio-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_PUTIO_CLIENT_SECRET
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to putio (Put.io).

--putio-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_PUTIO_TOKEN
-   Type: string
-   Required: false

--putio-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_PUTIO_AUTH_URL
-   Type: string
-   Required: false

--putio-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_PUTIO_TOKEN_URL
-   Type: string
-   Required: false

--putio-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_PUTIO_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--putio-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_PUTIO_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--putio-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_PUTIO_DESCRIPTION
-   Type: string
-   Required: false

Limitations

put.io has rate limiting. When you hit a limit, rclone automatically
retries after waiting the amount of time requested by the server.

If you want to avoid ever hitting these limits, you may use the
--tpslimit flag with a low number. Note that the imposed limits may be
different for different operations, and may change over time.

Proton Drive

Proton Drive is an end-to-end encrypted Swiss vault for your files that
protects your data.

This is an rclone backend for Proton Drive which supports the file
transfer features of Proton Drive using the same client-side encryption.

Due to the fact that Proton Drive doesn't publish its API documentation,
this backend is implemented with best efforts by reading the
open-sourced client source code and observing the Proton Drive traffic
in the browser.

NB This backend is currently in Beta. It is believed to be correct and
all the integration tests pass. However the Proton Drive protocol has
evolved over time there may be accounts it is not compatible with.
Please post on the rclone forum if you find an incompatibility.

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configurations

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Proton Drive
       \ "protondrive"
    [snip]
    Storage> protondrive
    User name
    user> you@protonmail.com
    Password.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Option 2fa.
    2FA code (if the account requires one)
    Enter a value. Press Enter to leave empty.
    2fa> 123456
    Remote config
    Configuration complete.
    Options:
    - type: protondrive
    - user: you@protonmail.com
    - pass: *** ENCRYPTED ***
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

NOTE: The Proton Drive encryption keys need to have been already
generated after a regular login via the browser, otherwise attempting to
use the credentials in rclone will fail.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your Proton Drive

    rclone lsd remote:

List all the files in your Proton Drive

    rclone ls remote:

To copy a local directory to an Proton Drive directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

Proton Drive Bridge does not support updating modification times yet.

The SHA1 hash algorithm is supported.

Restricted filename characters

Invalid UTF-8 bytes will be replaced, also left and right spaces will be
removed (code reference)

Duplicated files

Proton Drive can not have two files with exactly the same name and path.
If the conflict occurs, depending on the advanced config, the file might
or might not be overwritten.

Mailbox password

Please set your mailbox password in the advanced config section.

Caching

The cache is currently built for the case when the rclone is the only
instance performing operations to the mount point. The event system,
which is the proton API system that provides visibility of what has
changed on the drive, is yet to be implemented, so updates from other
clients won’t be reflected in the cache. Thus, if there are concurrent
clients accessing the same mount point, then we might have a problem
with caching the stale data.

Standard options

Here are the Standard options specific to protondrive (Proton Drive).

--protondrive-username

The username of your proton account

Properties:

-   Config: username
-   Env Var: RCLONE_PROTONDRIVE_USERNAME
-   Type: string
-   Required: true

--protondrive-password

The password of your proton account.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_PROTONDRIVE_PASSWORD
-   Type: string
-   Required: true

--protondrive-2fa

The 2FA code

The value can also be provided with --protondrive-2fa=000000

The 2FA code of your proton drive account if the account is set up with
two-factor authentication

Properties:

-   Config: 2fa
-   Env Var: RCLONE_PROTONDRIVE_2FA
-   Type: string
-   Required: false

--protondrive-otp-secret-key

The OTP secret key

The value can also be provided with
--protondrive-otp-secret-key=ABCDEFGHIJKLMNOPQRSTUVWXYZ234567

The OTP secret key of your proton drive account if the account is set up
with two-factor authentication

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: otp_secret_key
-   Env Var: RCLONE_PROTONDRIVE_OTP_SECRET_KEY
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to protondrive (Proton Drive).

--protondrive-mailbox-password

The mailbox password of your two-password proton account.

For more information regarding the mailbox password, please check the
following official knowledge base article:
https://proton.me/support/the-difference-between-the-mailbox-password-and-login-password

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: mailbox_password
-   Env Var: RCLONE_PROTONDRIVE_MAILBOX_PASSWORD
-   Type: string
-   Required: false

--protondrive-client-uid

Client uid key (internal use only)

Properties:

-   Config: client_uid
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_UID
-   Type: string
-   Required: false

--protondrive-client-access-token

Client access token key (internal use only)

Properties:

-   Config: client_access_token
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_ACCESS_TOKEN
-   Type: string
-   Required: false

--protondrive-client-refresh-token

Client refresh token key (internal use only)

Properties:

-   Config: client_refresh_token
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_REFRESH_TOKEN
-   Type: string
-   Required: false

--protondrive-client-salted-key-pass

Client salted key pass key (internal use only)

Properties:

-   Config: client_salted_key_pass
-   Env Var: RCLONE_PROTONDRIVE_CLIENT_SALTED_KEY_PASS
-   Type: string
-   Required: false

--protondrive-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_PROTONDRIVE_ENCODING
-   Type: Encoding
-   Default: Slash,LeftSpace,RightSpace,InvalidUtf8,Dot

--protondrive-original-file-size

Return the file size before encryption

The size of the encrypted file will be different from (bigger than) the
original file size. Unless there is a reason to return the file size
after encryption is performed, otherwise, set this option to true, as
features like Open() which will need to be supplied with original
content size, will fail to operate properly

Properties:

-   Config: original_file_size
-   Env Var: RCLONE_PROTONDRIVE_ORIGINAL_FILE_SIZE
-   Type: bool
-   Default: true

--protondrive-app-version

The app version string

            The app version string identifies the client that is currently performing
            the API request. Third-party Proton Drive integrations should use the form
            external-drive-<project>@<version>. If this option is left empty, rclone
            derives a compliant value from its own version. This value is sent with
            every API request; the option itself is optional.

Properties:

-   Config: app_version
-   Env Var: RCLONE_PROTONDRIVE_APP_VERSION
-   Type: string
-   Required: false

--protondrive-replace-existing-draft

Create a new revision when filename conflict is detected

When a file upload is cancelled or failed before completion, a draft
will be created and the subsequent upload of the same file to the same
location will be reported as a conflict.

The value can also be set by --protondrive-replace-existing-draft=true

If the option is set to true, the draft will be replaced and then the
upload operation will restart. If there are other clients also uploading
at the same file location at the same time, the behavior is currently
unknown. Need to set to true for integration tests. If the option is set
to false, an error "a draft exist - usually this means a file is being
uploaded at another client, or, there was a failed upload attempt" will
be returned, and no upload will happen.

Properties:

-   Config: replace_existing_draft
-   Env Var: RCLONE_PROTONDRIVE_REPLACE_EXISTING_DRAFT
-   Type: bool
-   Default: false

--protondrive-enable-caching

Caches the files and folders metadata to reduce API calls

Notice: If you are mounting ProtonDrive as a VFS, please disable this
feature, as the current implementation doesn't update or clear the cache
when there are external changes.

The files and folders on ProtonDrive are represented as links with
keyrings, which can be cached to improve performance and be friendly to
the API server.

The cache is currently built for the case when the rclone is the only
instance performing operations to the mount point. The event system,
which is the proton API system that provides visibility of what has
changed on the drive, is yet to be implemented, so updates from other
clients won’t be reflected in the cache. Thus, if there are concurrent
clients accessing the same mount point, then we might have a problem
with caching the stale data.

Properties:

-   Config: enable_caching
-   Env Var: RCLONE_PROTONDRIVE_ENABLE_CACHING
-   Type: bool
-   Default: true

--protondrive-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_PROTONDRIVE_DESCRIPTION
-   Type: string
-   Required: false

Limitations

This backend uses the Proton-API-Bridge, which is based on
go-proton-api, a fork of the official repo.

There is no official API documentation available from Proton Drive. But,
thanks to Proton open sourcing proton-go-api and the web, iOS, and
Android client codebases, we don't need to completely reverse engineer
the APIs by observing the web client traffic!

proton-go-api provides the basic building blocks of API calls and error
handling, such as 429 exponential back-off, but it is pretty much just a
barebone interface to the Proton API. For example, the encryption and
decryption of the Proton Drive file are not provided in this library.

The Proton-API-Bridge, attempts to bridge the gap, so rclone can be
built on top of this quickly. This codebase handles the intricate tasks
before and after calling Proton APIs, particularly the complex
encryption scheme, allowing developers to implement features for other
software on top of this codebase. There are likely quite a few errors in
this library, as there isn't official documentation available.

Seafile

This is a backend for the Seafile storage service:

-   It works with both the free community edition or the professional
    edition.
-   Seafile versions 6.x, 7.x, 8.x and 9.x are all supported.
-   Encrypted libraries are also supported.
-   It supports 2FA enabled users
-   Using a Library API Token is not supported

Configuration

There are two distinct modes you can setup your remote:

-   you point your remote to the root of the server, meaning you don't
    specify a library during the configuration: Paths are specified as
    remote:library. You may put subdirectories in too, e.g.
    remote:library/path/to/dir.
-   you point your remote to a specific library during the
    configuration: Paths are specified as remote:path/to/dir. This is
    the recommended mode when using encrypted libraries. (This mode is
    possibly slightly faster than the root mode)

Configuration in root mode

Here is an example of making a seafile configuration for a user with no
two-factor authentication. First run

    rclone config

This will guide you through an interactive setup process. To
authenticate you will need the URL of your server, your email (or
username) and your password.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> seafile
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Seafile
       \ "seafile"
    [snip]
    Storage> seafile
    ** See help for seafile backend at: https://rclone.org/seafile/ **

    URL of seafile host to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to cloud.seafile.com
       \ "https://cloud.seafile.com/"
    url> http://my.seafile.server/
    User name (usually email address)
    Enter a string value. Press Enter for the default ("").
    user> me@example.com
    Password
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank (default)
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Two-factor authentication ('true' if the account has 2FA enabled)
    Enter a boolean value (true or false). Press Enter for the default ("false").
    2fa> false
    Name of the library. Leave blank to access all non-encrypted libraries.
    Enter a string value. Press Enter for the default ("").
    library>
    Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank (default)
    y/g/n> n
    Edit advanced config? (y/n)
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    Two-factor authentication is not enabled on this account.
    --------------------
    [seafile]
    type = seafile
    url = http://my.seafile.server/
    user = me@example.com
    pass = *** ENCRYPTED ***
    2fa = false
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This remote is called seafile. It's pointing to the root of your seafile
server and can now be used like this:

See all libraries

    rclone lsd seafile:

Create a new library

    rclone mkdir seafile:library

List the contents of a library

    rclone ls seafile:library

Sync /home/local/directory to the remote library, deleting any excess
files in the library.

    rclone sync --interactive /home/local/directory seafile:library

Configuration in library mode

Here's an example of a configuration in library mode with a user that
has the two-factor authentication enabled. Your 2FA code will be asked
at the end of the configuration, and will attempt to authenticate you:

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> seafile
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Seafile
       \ "seafile"
    [snip]
    Storage> seafile
    ** See help for seafile backend at: https://rclone.org/seafile/ **

    URL of seafile host to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to cloud.seafile.com
       \ "https://cloud.seafile.com/"
    url> http://my.seafile.server/
    User name (usually email address)
    Enter a string value. Press Enter for the default ("").
    user> me@example.com
    Password
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank (default)
    y/g> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Two-factor authentication ('true' if the account has 2FA enabled)
    Enter a boolean value (true or false). Press Enter for the default ("false").
    2fa> true
    Name of the library. Leave blank to access all non-encrypted libraries.
    Enter a string value. Press Enter for the default ("").
    library> My Library
    Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank (default)
    y/g/n> n
    Edit advanced config? (y/n)
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    Two-factor authentication: please enter your 2FA code
    2fa code> 123456
    Authenticating...
    Success!
    --------------------
    [seafile]
    type = seafile
    url = http://my.seafile.server/
    user = me@example.com
    pass = 
    2fa = true
    library = My Library
    --------------------
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

You'll notice your password is blank in the configuration. It's because
we only need the password to authenticate you once.

You specified My Library during the configuration. The root of the
remote is pointing at the root of the library My Library:

See all files in the library:

    rclone lsd seafile:

Create a new directory inside the library

    rclone mkdir seafile:directory

List the contents of a directory

    rclone ls seafile:directory

Sync /home/local/directory to the remote library, deleting any excess
files in the library.

    rclone sync --interactive /home/local/directory seafile:

--fast-list

Seafile version 7+ supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details. Please note this is not supported on seafile server version 6.x

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  /            0x2F        ／
  "            0x22        ＂
  \            0x5C        ＼

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Seafile and rclone link

Rclone supports generating share links for non-encrypted libraries only.
They can either be for a file or a directory:

    $ rclone link seafile:seafile-tutorial.doc
    http://my.seafile.server/f/fdcd8a2f93f84b8b90f4/

or if run on a directory you will get:

    $ rclone link seafile:dir
    http://my.seafile.server/d/9ea2455f6f55478bbb0d/

Please note a share link is unique for each file or directory. If you
run a link command on a file/dir that has already been shared, you will
get the exact same link.

Compatibility

It has been actively developed using the seafile docker image of these
versions:

-   6.3.4 community edition
-   7.0.5 community edition
-   7.1.3 community edition
-   9.0.10 community edition

Versions below 6.0 are not supported. Versions between 6.0 and 6.3
haven't been tested and might not work properly.

Each new version of rclone is automatically tested against the latest
docker image of the seafile community server.

Standard options

Here are the Standard options specific to seafile (seafile).

--seafile-url

URL of seafile host to connect to.

Properties:

-   Config: url
-   Env Var: RCLONE_SEAFILE_URL
-   Type: string
-   Required: true
-   Examples:
    -   "https://cloud.seafile.com/"
        -   Connect to cloud.seafile.com.

--seafile-user

User name (usually email address).

Properties:

-   Config: user
-   Env Var: RCLONE_SEAFILE_USER
-   Type: string
-   Required: true

--seafile-pass

Password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_SEAFILE_PASS
-   Type: string
-   Required: false

--seafile-2fa

Two-factor authentication ('true' if the account has 2FA enabled).

Properties:

-   Config: 2fa
-   Env Var: RCLONE_SEAFILE_2FA
-   Type: bool
-   Default: false

--seafile-library

Name of the library.

Leave blank to access all non-encrypted libraries.

Properties:

-   Config: library
-   Env Var: RCLONE_SEAFILE_LIBRARY
-   Type: string
-   Required: false

--seafile-library-key

Library password (for encrypted libraries only).

Leave blank if you pass it through the command line.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: library_key
-   Env Var: RCLONE_SEAFILE_LIBRARY_KEY
-   Type: string
-   Required: false

--seafile-auth-token

Authentication token.

Properties:

-   Config: auth_token
-   Env Var: RCLONE_SEAFILE_AUTH_TOKEN
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to seafile (seafile).

--seafile-create-library

Should rclone create a library if it doesn't exist.

Properties:

-   Config: create_library
-   Env Var: RCLONE_SEAFILE_CREATE_LIBRARY
-   Type: bool
-   Default: false

--seafile-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_SEAFILE_ENCODING
-   Type: Encoding
-   Default: Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8,Dot

--seafile-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SEAFILE_DESCRIPTION
-   Type: string
-   Required: false

SFTP

SFTP is the Secure (or SSH) File Transfer Protocol.

The SFTP backend can be used with a number of different providers:

-   Hetzner Storage Box
-   rsync.net

SFTP runs over SSH v2 and is installed as standard with most modern SSH
installations.

Paths are specified as remote:path. If the path does not begin with a /
it is relative to the home directory of the user. An empty path remote:
refers to the user's home directory. For example, rclone lsd remote:
would list the home directory of the user configured in the rclone
remote config (i.e /home/sftpuser). However, rclone lsd remote:/ would
list the root directory for remote machine (i.e. /)

Note that some SFTP servers will need the leading / - Synology is a good
example of this. rsync.net and Hetzner, on the other hand, requires
users to OMIT the leading /.

Note that by default rclone will try to execute shell commands on the
server, see shell access considerations.

Configuration

Here is an example of making an SFTP configuration. First run

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / SSH/SFTP
       \ "sftp"
    [snip]
    Storage> sftp
    SSH host to connect to
    Choose a number from below, or type in your own value
     1 / Connect to example.com
       \ "example.com"
    host> example.com
    SSH username
    Enter a string value. Press Enter for the default ("$USER").
    user> sftpuser
    SSH port number
    Enter a signed integer. Press Enter for the default (22).
    port>
    SSH password, leave blank to use ssh-agent.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> n
    Path to unencrypted PEM-encoded private key file, leave blank to use ssh-agent.
    key_file>
    Remote config
    Configuration complete.
    Options:
    - type: sftp
    - host: example.com
    - user: sftpuser
    - port:
    - pass:
    - key_file:
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

This remote is called remote and can now be used like this:

See all directories in the home directory

    rclone lsd remote:

See all directories in the root directory

    rclone lsd remote:/

Make a new directory

    rclone mkdir remote:path/to/directory

List the contents of a directory

    rclone ls remote:path/to/directory

Sync /home/local/directory to the remote directory, deleting any excess
files in the directory.

    rclone sync --interactive /home/local/directory remote:directory

Mount the remote path /srv/www-data/ to the local path /mnt/www-data

    rclone mount remote:/srv/www-data/ /mnt/www-data

SSH Authentication

The SFTP remote supports three authentication methods:

-   Password
-   Key file, including certificate signed keys
-   ssh-agent

Key files should be PEM-encoded private key files. For instance
/home/$USER/.ssh/id_rsa. Only unencrypted OpenSSH or PEM encrypted files
are supported.

The key file can be specified in either an external file (key_file) or
contained within the rclone config file (key_pem). If using key_pem in
the config file, the entry should be on a single line with new line (''
or '') separating lines. I.e.

    key_pem = -----BEGIN RSA PRIVATE KEY-----\nMaMbaIXtE\n0gAMbMbaSsd\nMbaass\n-----END RSA PRIVATE KEY-----

This will generate it correctly for key_pem for use in the config:

    awk '{printf "%s\\n", $0}' < ~/.ssh/id_rsa

If you don't specify pass, key_file, or key_pem or ask_password then
rclone will attempt to contact an ssh-agent. You can also specify
key_use_agent to force the usage of an ssh-agent. In this case key_file
or key_pem can also be specified to force the usage of a specific key in
the ssh-agent.

Using an ssh-agent is the only way to load encrypted OpenSSH keys at the
moment.

If you set the ask_password option, rclone will prompt for a password
when needed and no password has been configured.

Certificate-signed keys

With traditional key-based authentication, you configure your private
key only, and the public key built into it will be used during the
authentication process.

If you have a certificate you may use it to sign your public key,
creating a separate SSH user certificate that should be used instead of
the plain public key extracted from the private key. Then you must
provide the path to the user certificate public key file in pubkey_file
or the content of the file in pubkey.

Note: This is not the traditional public key paired with your private
key, typically saved as /home/$USER/.ssh/id_rsa.pub. Setting this path
in pubkey_file will not work.

Example:

    [remote]
    type = sftp
    host = example.com
    user = sftpuser
    key_file = ~/id_rsa
    pubkey_file = ~/id_rsa-cert.pub

If you concatenate a cert with a private key then you can specify the
merged file in both places.

Note: the cert must come first in the file. e.g.

    cat id_rsa-cert.pub id_rsa > merged_key

Host key validation

By default rclone will not check the server's host key for validation.
This can allow an attacker to replace a server with their own and if you
use password authentication then this can lead to that password being
exposed.

Host key matching, using standard known_hosts files can be turned on by
enabling the known_hosts_file option. This can point to the file
maintained by OpenSSH or can point to a unique file.

e.g. using the OpenSSH known_hosts file:

    [remote]
    type = sftp
    host = example.com
    user = sftpuser
    pass = 
    known_hosts_file = ~/.ssh/known_hosts

Alternatively you can create your own known hosts file like this:

    ssh-keyscan -t dsa,rsa,ecdsa,ed25519 example.com >> known_hosts

There are some limitations:

-   rclone will not manage this file for you. If the key is missing or
    wrong then the connection will be refused.
-   If the server is set up for a certificate host key then the entry in
    the known_hosts file must be the @cert-authority entry for the CA

If the host key provided by the server does not match the one in the
file (or is missing) then the connection will be aborted and an error
returned such as

    NewFs: couldn't connect SSH: ssh: handshake failed: knownhosts: key mismatch

or

    NewFs: couldn't connect SSH: ssh: handshake failed: knownhosts: key is unknown

If you see an error such as

    NewFs: couldn't connect SSH: ssh: handshake failed: ssh: no authorities for hostname: example.com:22

then it is likely the server has presented a CA signed host certificate
and you will need to add the appropriate @cert-authority entry.

The known_hosts_file setting can be set during rclone config as an
advanced option.

ssh-agent on macOS

Note that there seem to be various problems with using an ssh-agent on
macOS due to recent changes in the OS. The most effective work-around
seems to be to start an ssh-agent in each session, e.g.

    eval `ssh-agent -s` && ssh-add -A

And then at the end of the session

    eval `ssh-agent -k`

These commands can be used in scripts of course.

Shell access

Some functionality of the SFTP backend relies on remote shell access,
and the possibility to execute commands. This includes checksum, and in
some cases also about. The shell commands that must be executed may be
different on different type of shells, and also quoting/escaping of file
path arguments containing special characters may be different. Rclone
therefore needs to know what type of shell it is, and if shell access is
available at all.

Most servers run on some version of Unix, and then a basic Unix shell
can be assumed, without further distinction. Windows 10, Server 2019,
and later can also run a SSH server, which is a port of OpenSSH (see
official installation guide). On a Windows server the shell handling is
different: Although it can also be set up to use a Unix type shell, e.g.
Cygwin bash, the default is to use Windows Command Prompt (cmd.exe), and
PowerShell is a recommended alternative. All of these have behave
differently, which rclone must handle.

Rclone tries to auto-detect what type of shell is used on the server,
first time you access the SFTP remote. If a remote shell session is
successfully created, it will look for indications that it is CMD or
PowerShell, with fall-back to Unix if not something else is detected. If
unable to even create a remote shell session, then shell command
execution will be disabled entirely. The result is stored in the SFTP
remote configuration, in option shell_type, so that the auto-detection
only have to be performed once. If you manually set a value for this
option before first run, the auto-detection will be skipped, and if you
set a different value later this will override any existing. Value none
can be set to avoid any attempts at executing shell commands, e.g. if
this is not allowed on the server. If you have shell_type = none in the
configuration then the ssh must not be set.

When the server is rclone serve sftp, the rclone SFTP remote will detect
this as a Unix type shell - even if it is running on Windows. This
server does not actually have a shell, but it accepts input commands
matching the specific ones that the SFTP backend relies on for Unix
shells, e.g. md5sum and df. Also it handles the string escape rules used
for Unix shell. Treating it as a Unix type shell from a SFTP remote will
therefore always be correct, and support all features.

Shell access considerations

The shell type auto-detection logic, described above, means that by
default rclone will try to run a shell command the first time a new sftp
remote is accessed. If you configure a sftp remote without a config
file, e.g. an on the fly remote, rclone will have nowhere to store the
result, and it will re-run the command on every access. To avoid this
you should explicitly set the shell_type option to the correct value, or
to none if you want to prevent rclone from executing any remote shell
commands.

It is also important to note that, since the shell type decides how
quoting and escaping of file paths used as command-line arguments are
performed, configuring the wrong shell type may leave you exposed to
command injection exploits. Make sure to confirm the auto-detected shell
type, or explicitly set the shell type you know is correct, or disable
shell access until you know.

Checksum

SFTP does not natively support checksums (file hash), but rclone is able
to use checksumming if the same login has shell access, and can execute
remote commands. If there is a command that can calculate compatible
checksums on the remote system, Rclone can then be configured to execute
this whenever a checksum is needed, and read back the results. By
default MD5 and SHA-1 are considered, but also CRC32, SHA-256, BLAKE3,
XXH3 and XXH128 are supported, option hashes can be set to specify which
to consider.

Normally this requires an external utility being available on the
server. E.g. for MD5 checksums, by default rclone will try commands
md5sum, md5 and rclone md5sum, and the first one found usable will be
picked. These utilities normally need to be in the remote's PATH to be
found.

In some cases the shell itself is capable of calculating checksums.
PowerShell is an example of such a shell. If rclone detects that the
remote shell is PowerShell, which means it most probably is a Windows
OpenSSH server, rclone will use a predefined script block to produce the
checksums for MD5, SHA-1 and SHA-256 when no external checksum commands
are found (see shell access). This assumes PowerShell version 4.0 or
newer.

The options md5sum_command, sha1_command, etc. can be used to customize
the commands to be executed for calculation of checksums. You can for
example set a specific path to where the md5sum executable are located,
or specify some other tool that print checksums in compatible format.
The value can include command-line arguments, or even shell script
blocks as with PowerShell. Rclone has subcommands hashsum, md5sum and
sha1sum that use compatible format, which means if you have an rclone
executable on the server it can be used. As mentioned above, they will
be automatically picked up if found in PATH, but if not you can set
something like /path/to/rclone md5sum as the value of option
md5sum_command to make sure a specific executable is used.

Remote checksumming is recommended and enabled by default. First time
rclone is using a SFTP remote, if options md5sum_command or sha1_command
are not set, it will check if any of the default commands for each of
them, as described above, can be used. The result will be saved in the
remote configuration, so next time it will use the same. Value none will
be set if none of the default commands could be used for a specific
algorithm, and this algorithm will not be supported by the remote.

Disabling the checksumming completely may be required if you are
connecting to SFTP servers which are not under your control, and to
which the execution of remote shell commands is prohibited. Set the
configuration option disable_hashcheck to true to disable checksumming
entirely (you get the same effect by setting option hashes to none or
options md5sum_command, sha1_command etc. to none). Set option
shell_type to none to not only disable checksumming, but also disable
all other functionality that are based on remote shell command
execution.

Modification times and hashes

Modified times are stored on the server to 1 second precision.

Modified times are used in syncing and are fully supported.

Some SFTP servers disable setting/modifying the file modification time
after upload (for example, certain configurations of ProFTPd with
mod_sftp). If you are using one of these servers, you can set the option
set_modtime = false in your RClone backend configuration to disable this
behaviour.

About command

The about command returns the total space, free space, and used space on
the remote for the disk of the specified path on the remote or, if not
set, the disk of the root on the remote.

SFTP usually supports the about command, but it depends on the server.
If the server implements the vendor-specific VFS statistics extension,
which is normally the case with OpenSSH instances, it will be used. If
not, but the same login has access to a Unix shell, where the df command
is available (e.g. in the remote's PATH), then this will be used
instead. If the server shell is PowerShell, probably with a Windows
OpenSSH server, rclone will use a built-in shell command (see shell
access). If none of the above is applicable, about will fail.

Standard options

Here are the Standard options specific to sftp (SSH/SFTP).

--sftp-host

SSH host to connect to.

E.g. "example.com".

Properties:

-   Config: host
-   Env Var: RCLONE_SFTP_HOST
-   Type: string
-   Required: true

--sftp-user

SSH username.

Properties:

-   Config: user
-   Env Var: RCLONE_SFTP_USER
-   Type: string
-   Default: "$USER"

--sftp-port

SSH port number.

Properties:

-   Config: port
-   Env Var: RCLONE_SFTP_PORT
-   Type: int
-   Default: 22

--sftp-pass

SSH password, leave blank to use ssh-agent.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_SFTP_PASS
-   Type: string
-   Required: false

--sftp-key-pem

Raw PEM-encoded private key.

Note that this should be on a single line with line endings replaced
with '', eg

    key_pem = -----BEGIN RSA PRIVATE KEY-----\nMaMbaIXtE\n0gAMbMbaSsd\nMbaass\n-----END RSA PRIVATE KEY-----

This will generate the single line correctly:

    awk '{printf "%s\\n", $0}' < ~/.ssh/id_rsa

If specified, it will override the key_file parameter.

Properties:

-   Config: key_pem
-   Env Var: RCLONE_SFTP_KEY_PEM
-   Type: string
-   Required: false

--sftp-key-file

Path to PEM-encoded private key file.

Leave blank or set key-use-agent to use ssh-agent.

Leading ~ will be expanded in the file name as will environment
variables such as ${RCLONE_CONFIG_DIR}.

Properties:

-   Config: key_file
-   Env Var: RCLONE_SFTP_KEY_FILE
-   Type: string
-   Required: false

--sftp-key-file-pass

The passphrase to decrypt the PEM-encoded private key file.

Only PEM encrypted key files (old OpenSSH format) are supported.
Encrypted keys in the new OpenSSH format can't be used.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: key_file_pass
-   Env Var: RCLONE_SFTP_KEY_FILE_PASS
-   Type: string
-   Required: false

--sftp-pubkey

SSH public certificate for public certificate based authentication. Set
this if you have a signed certificate you want to use for
authentication. If specified will override pubkey_file.

Properties:

-   Config: pubkey
-   Env Var: RCLONE_SFTP_PUBKEY
-   Type: string
-   Required: false

--sftp-pubkey-file

Optional path to public key file.

Set this if you have a signed certificate you want to use for
authentication.

Leading ~ will be expanded in the file name as will environment
variables such as ${RCLONE_CONFIG_DIR}.

Properties:

-   Config: pubkey_file
-   Env Var: RCLONE_SFTP_PUBKEY_FILE
-   Type: string
-   Required: false

--sftp-key-use-agent

When set forces the usage of the ssh-agent.

When key-file is also set, the ".pub" file of the specified key-file is
read and only the associated key is requested from the ssh-agent. This
allows to avoid Too many authentication failures for *username* errors
when the ssh-agent contains many keys.

Properties:

-   Config: key_use_agent
-   Env Var: RCLONE_SFTP_KEY_USE_AGENT
-   Type: bool
-   Default: false

--sftp-use-insecure-cipher

Enable the use of insecure ciphers and key exchange methods.

This enables the use of the following insecure ciphers and key exchange
methods:

-   aes128-cbc
-   aes192-cbc
-   aes256-cbc
-   3des-cbc
-   diffie-hellman-group-exchange-sha256
-   diffie-hellman-group-exchange-sha1

Those algorithms are insecure and may allow plaintext data to be
recovered by an attacker.

This must be false if you use either ciphers or key_exchange advanced
options.

Properties:

-   Config: use_insecure_cipher
-   Env Var: RCLONE_SFTP_USE_INSECURE_CIPHER
-   Type: bool
-   Default: false
-   Examples:
    -   "false"
        -   Use default Cipher list.
    -   "true"
        -   Enables the use of the aes128-cbc cipher and
            diffie-hellman-group-exchange-sha256,
            diffie-hellman-group-exchange-sha1 key exchange.

--sftp-disable-hashcheck

Disable the execution of SSH commands to determine if remote file
hashing is available.

Leave blank or set to false to enable hashing (recommended), set to true
to disable hashing.

Properties:

-   Config: disable_hashcheck
-   Env Var: RCLONE_SFTP_DISABLE_HASHCHECK
-   Type: bool
-   Default: false

--sftp-ssh

Path and arguments to external ssh binary.

Normally rclone will use its internal ssh library to connect to the SFTP
server. However it does not implement all possible ssh options so it may
be desirable to use an external ssh binary.

Rclone ignores all the internal config if you use this option and
expects you to configure the ssh binary with the user/host/port and any
other options you need.

Important The ssh command must log in without asking for a password so
needs to be configured with keys or certificates.

Rclone will run the command supplied either with the additional
arguments "-s sftp" to access the SFTP subsystem or with commands such
as "md5sum /path/to/file" appended to read checksums.

Any arguments with spaces in should be surrounded by "double quotes".

An example setting might be:

    ssh -o ServerAliveInterval=20 user@example.com

Note that when using an external ssh binary rclone makes a new ssh
connection for every hash it calculates.

Properties:

-   Config: ssh
-   Env Var: RCLONE_SFTP_SSH
-   Type: SpaceSepList
-   Default:

Advanced options

Here are the Advanced options specific to sftp (SSH/SFTP).

--sftp-known-hosts-file

Optional path to known_hosts file.

Set this value to enable server host key validation.

Leading ~ will be expanded in the file name as will environment
variables such as ${RCLONE_CONFIG_DIR}.

Properties:

-   Config: known_hosts_file
-   Env Var: RCLONE_SFTP_KNOWN_HOSTS_FILE
-   Type: string
-   Required: false
-   Examples:
    -   "~/.ssh/known_hosts"
        -   Use OpenSSH's known_hosts file.

--sftp-ask-password

Allow asking for SFTP password when needed.

If this is set and no password is supplied then rclone will: - ask for a
password - not contact the ssh agent

Properties:

-   Config: ask_password
-   Env Var: RCLONE_SFTP_ASK_PASSWORD
-   Type: bool
-   Default: false

--sftp-path-override

Override path used by SSH shell commands.

This allows checksum calculation when SFTP and SSH paths are different.
This issue affects among others Synology NAS boxes.

E.g. if shared folders can be found in directories representing volumes:

    rclone sync /home/local/directory remote:/directory --sftp-path-override /volume2/directory

E.g. if home directory can be found in a shared folder called "home":

    rclone sync /home/local/directory remote:/home/directory --sftp-path-override /volume1/homes/USER/directory

To specify only the path to the SFTP remote's root, and allow rclone to
add any relative subpaths automatically (including unwrapping/decrypting
remotes as necessary), add the '@' character to the beginning of the
path.

E.g. the first example above could be rewritten as:

    rclone sync /home/local/directory remote:/directory --sftp-path-override @/volume2

Note that when using this method with Synology "home" folders, the full
"/homes/USER" path should be specified instead of "/home".

E.g. the second example above should be rewritten as:

    rclone sync /home/local/directory remote:/homes/USER/directory --sftp-path-override @/volume1

Properties:

-   Config: path_override
-   Env Var: RCLONE_SFTP_PATH_OVERRIDE
-   Type: string
-   Required: false

--sftp-set-modtime

Set the modified time on the remote if set.

Properties:

-   Config: set_modtime
-   Env Var: RCLONE_SFTP_SET_MODTIME
-   Type: bool
-   Default: true

--sftp-shell-type

The type of SSH shell on remote server, if any.

Leave blank for autodetect.

Properties:

-   Config: shell_type
-   Env Var: RCLONE_SFTP_SHELL_TYPE
-   Type: string
-   Required: false
-   Examples:
    -   "none"
        -   No shell access
    -   "unix"
        -   Unix shell
    -   "powershell"
        -   PowerShell
    -   "cmd"
        -   Windows Command Prompt

--sftp-hashes

Comma separated list of supported checksum types.

Properties:

-   Config: hashes
-   Env Var: RCLONE_SFTP_HASHES
-   Type: CommaSepList
-   Default:

--sftp-md5sum-command

The command used to read MD5 hashes.

Leave blank for autodetect.

Properties:

-   Config: md5sum_command
-   Env Var: RCLONE_SFTP_MD5SUM_COMMAND
-   Type: string
-   Required: false

--sftp-sha1sum-command

The command used to read SHA-1 hashes.

Leave blank for autodetect.

Properties:

-   Config: sha1sum_command
-   Env Var: RCLONE_SFTP_SHA1SUM_COMMAND
-   Type: string
-   Required: false

--sftp-crc32sum-command

The command used to read CRC-32 hashes.

Leave blank for autodetect.

Properties:

-   Config: crc32sum_command
-   Env Var: RCLONE_SFTP_CRC32SUM_COMMAND
-   Type: string
-   Required: false

--sftp-sha256sum-command

The command used to read SHA-256 hashes.

Leave blank for autodetect.

Properties:

-   Config: sha256sum_command
-   Env Var: RCLONE_SFTP_SHA256SUM_COMMAND
-   Type: string
-   Required: false

--sftp-blake3sum-command

The command used to read BLAKE3 hashes.

Leave blank for autodetect.

Properties:

-   Config: blake3sum_command
-   Env Var: RCLONE_SFTP_BLAKE3SUM_COMMAND
-   Type: string
-   Required: false

--sftp-xxh3sum-command

The command used to read XXH3 hashes.

Leave blank for autodetect.

Properties:

-   Config: xxh3sum_command
-   Env Var: RCLONE_SFTP_XXH3SUM_COMMAND
-   Type: string
-   Required: false

--sftp-xxh128sum-command

The command used to read XXH128 hashes.

Leave blank for autodetect.

Properties:

-   Config: xxh128sum_command
-   Env Var: RCLONE_SFTP_XXH128SUM_COMMAND
-   Type: string
-   Required: false

--sftp-skip-links

Set to skip any symlinks and any other non regular files.

Properties:

-   Config: skip_links
-   Env Var: RCLONE_SFTP_SKIP_LINKS
-   Type: bool
-   Default: false

--sftp-subsystem

Specifies the SSH2 subsystem on the remote host.

Properties:

-   Config: subsystem
-   Env Var: RCLONE_SFTP_SUBSYSTEM
-   Type: string
-   Default: "sftp"

--sftp-server-command

Specifies the path or command to run a sftp server on the remote host.

The subsystem option is ignored when server_command is defined.

If adding server_command to the configuration file please note that it
should not be enclosed in quotes, since that will make rclone fail.

A working example is:

    [remote_name]
    type = sftp
    server_command = sudo /usr/libexec/openssh/sftp-server

Properties:

-   Config: server_command
-   Env Var: RCLONE_SFTP_SERVER_COMMAND
-   Type: string
-   Required: false

--sftp-use-fstat

If set use fstat instead of stat.

Some servers limit the amount of open files and calling Stat after
opening the file will throw an error from the server. Setting this flag
will call Fstat instead of Stat which is called on an already open file
handle.

It has been found that this helps with IBM Sterling SFTP servers which
have "extractability" level set to 1 which means only 1 file can be
opened at any given time.

Properties:

-   Config: use_fstat
-   Env Var: RCLONE_SFTP_USE_FSTAT
-   Type: bool
-   Default: false

--sftp-disable-concurrent-reads

If set don't use concurrent reads.

Normally concurrent reads are safe to use and not using them will
degrade performance, so this option is disabled by default.

Some servers limit the amount number of times a file can be downloaded.
Using concurrent reads can trigger this limit, so if you have a server
which returns

    Failed to copy: file does not exist

Then you may need to enable this flag.

If concurrent reads are disabled, the use_fstat option is ignored.

Properties:

-   Config: disable_concurrent_reads
-   Env Var: RCLONE_SFTP_DISABLE_CONCURRENT_READS
-   Type: bool
-   Default: false

--sftp-disable-concurrent-writes

If set don't use concurrent writes.

Normally rclone uses concurrent writes to upload files. This improves
the performance greatly, especially for distant servers.

This option disables concurrent writes should that be necessary.

Properties:

-   Config: disable_concurrent_writes
-   Env Var: RCLONE_SFTP_DISABLE_CONCURRENT_WRITES
-   Type: bool
-   Default: false

--sftp-idle-timeout

Max time before closing idle connections.

If no connections have been returned to the connection pool in the time
given, rclone will empty the connection pool.

Set to 0 to keep connections indefinitely.

Properties:

-   Config: idle_timeout
-   Env Var: RCLONE_SFTP_IDLE_TIMEOUT
-   Type: Duration
-   Default: 1m0s

--sftp-chunk-size

Upload and download chunk size.

This controls the maximum size of payload in SFTP protocol packets. The
RFC limits this to 32768 bytes (32k), which is the default. However, a
lot of servers support larger sizes, typically limited to a maximum
total package size of 256k, and setting it larger will increase transfer
speed dramatically on high latency links. This includes OpenSSH, and,
for example, using the value of 255k works well, leaving plenty of room
for overhead while still being within a total packet size of 256k.

Make sure to test thoroughly before using a value higher than 32k, and
only use it if you always connect to the same server or after
sufficiently broad testing. If you get errors such as "failed to send
packet payload: EOF", lots of "connection lost", or "corrupted on
transfer", when copying a larger file, try lowering the value. The
server run by rclone serve sftp sends packets with standard 32k maximum
payload so you must not set a different chunk_size when downloading
files, but it accepts packets up to the 256k total size, so for uploads
the chunk_size can be set as for the OpenSSH example above.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_SFTP_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 32Ki

--sftp-concurrency

The maximum number of outstanding requests for one file

This controls the maximum number of outstanding requests for one file.
Increasing it will increase throughput on high latency links at the cost
of using more memory.

Properties:

-   Config: concurrency
-   Env Var: RCLONE_SFTP_CONCURRENCY
-   Type: int
-   Default: 64

--sftp-connections

Maximum number of SFTP simultaneous connections, 0 for unlimited.

Note that setting this is very likely to cause deadlocks so it should be
used with care.

If you are doing a sync or copy then make sure connections is one more
than the sum of --transfers and --checkers.

If you use --check-first then it just needs to be one more than the
maximum of --checkers and --transfers.

So for connections 3 you'd use --checkers 2 --transfers 2 --check-first
or --checkers 1 --transfers 1.

Properties:

-   Config: connections
-   Env Var: RCLONE_SFTP_CONNECTIONS
-   Type: int
-   Default: 0

--sftp-set-env

Environment variables to pass to sftp and commands

Set environment variables in the form:

    VAR=value

to be passed to the sftp client and to any commands run (eg md5sum).

Pass multiple variables space separated, eg

    VAR1=value VAR2=value

and pass variables with spaces in quotes, eg

    "VAR3=value with space" "VAR4=value with space" VAR5=nospacehere

Properties:

-   Config: set_env
-   Env Var: RCLONE_SFTP_SET_ENV
-   Type: SpaceSepList
-   Default:

--sftp-ciphers

Space separated list of ciphers to be used for session encryption,
ordered by preference.

At least one must match with server configuration. This can be checked
for example using ssh -Q cipher.

This must not be set if use_insecure_cipher is true.

Example:

    aes128-ctr aes192-ctr aes256-ctr aes128-gcm@openssh.com aes256-gcm@openssh.com

Properties:

-   Config: ciphers
-   Env Var: RCLONE_SFTP_CIPHERS
-   Type: SpaceSepList
-   Default:

--sftp-key-exchange

Space separated list of key exchange algorithms, ordered by preference.

At least one must match with server configuration. This can be checked
for example using ssh -Q kex.

This must not be set if use_insecure_cipher is true.

Example:

    sntrup761x25519-sha512@openssh.com curve25519-sha256 curve25519-sha256@libssh.org ecdh-sha2-nistp256

Properties:

-   Config: key_exchange
-   Env Var: RCLONE_SFTP_KEY_EXCHANGE
-   Type: SpaceSepList
-   Default:

--sftp-macs

Space separated list of MACs (message authentication code) algorithms,
ordered by preference.

At least one must match with server configuration. This can be checked
for example using ssh -Q mac.

Example:

    umac-64-etm@openssh.com umac-128-etm@openssh.com hmac-sha2-256-etm@openssh.com

Properties:

-   Config: macs
-   Env Var: RCLONE_SFTP_MACS
-   Type: SpaceSepList
-   Default:

--sftp-host-key-algorithms

Space separated list of host key algorithms, ordered by preference.

At least one must match with server configuration. This can be checked
for example using ssh -Q HostKeyAlgorithms.

Note: This can affect the outcome of key negotiation with the server
even if server host key validation is not enabled.

Example:

    ssh-ed25519 ssh-rsa ssh-dss

Properties:

-   Config: host_key_algorithms
-   Env Var: RCLONE_SFTP_HOST_KEY_ALGORITHMS
-   Type: SpaceSepList
-   Default:

--sftp-socks-proxy

Socks 5 proxy host.

Supports the format user:pass@host:port, user@host:port, host:port.

Example:

    myUser:myPass@localhost:9005

Properties:

-   Config: socks_proxy
-   Env Var: RCLONE_SFTP_SOCKS_PROXY
-   Type: string
-   Required: false

--sftp-http-proxy

URL for HTTP CONNECT proxy

Set this to a URL for an HTTP proxy which supports the HTTP CONNECT
verb.

Supports the format http://user:pass@host:port, http://host:port,
http://host.

Example:

    http://myUser:myPass@proxyhostname.example.com:8000

Properties:

-   Config: http_proxy
-   Env Var: RCLONE_SFTP_HTTP_PROXY
-   Type: string
-   Required: false

--sftp-copy-is-hardlink

Set to enable server side copies using hardlinks.

The SFTP protocol does not define a copy command so normally server side
copies are not allowed with the sftp backend.

However the SFTP protocol does support hardlinking, and if you enable
this flag then the sftp backend will support server side copies. These
will be implemented by doing a hardlink from the source to the
destination.

Not all sftp servers support this.

Note that hardlinking two files together will use no additional space as
the source and the destination will be the same file.

This feature may be useful backups made with --copy-dest.

Properties:

-   Config: copy_is_hardlink
-   Env Var: RCLONE_SFTP_COPY_IS_HARDLINK
-   Type: bool
-   Default: false

--sftp-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SFTP_DESCRIPTION
-   Type: string
-   Required: false

Limitations

On some SFTP servers (e.g. Synology) the paths are different for SSH and
SFTP so the hashes can't be calculated properly. You can either use
--sftp-path-override or disable_hashcheck.

The only ssh agent supported under Windows is Putty's pageant.

The Go SSH library disables the use of the aes128-cbc cipher by default,
due to security concerns. This can be re-enabled on a per-connection
basis by setting the use_insecure_cipher setting in the configuration
file to true. Further details on the insecurity of this cipher can be
found in this paper.

SFTP isn't supported under plan9 until this issue is fixed.

Note that since SFTP isn't HTTP based the following flags don't work
with it: --dump-headers, --dump-bodies, --dump-auth.

Note that --timeout and --contimeout are both supported.

rsync.net

rsync.net is supported through the SFTP backend.

See rsync.net's documentation of rclone examples.

Hetzner Storage Box

Hetzner Storage Boxes are supported through the SFTP backend on port 23.

See Hetzner's documentation for details

Shade

This is a backend for the Shade platform

About Shade

Shade is an AI-powered cloud NAS that makes your cloud files behave like
a local drive, optimized for media and creative workflows. It provides
fast, secure access with natural-language search, easy sharing, and
scalable cloud storage.

Accounts & Pricing

To use this backend, you need to create a free account on Shade. You can
start with a free account and get 20GB of storage for free.

Usage

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

Here is an example of making a Shade configuration.

First, create a create a free account account and choose a plan.

You will need to log in and get the API Key and Drive ID for your
account from the settings section of your account and created drive
respectively.

Now run

rclone config

Follow this interactive process:

    $ rclone config
    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> n

    Enter name for new remote.
    name> Shade

    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    [OTHER OPTIONS]
    xx / Shade FS
       \ (shade)
    [OTHER OPTIONS]
    Storage> xx

    Option drive_id.
    The ID of your drive, see this in the drive settings. Individual rclone configs must be made per drive.
    Enter a value.
    drive_id> [YOUR_ID]

    Option api_key.
    An API key for your account.
    Enter a value.
    api_key> [YOUR_API_KEY]

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: shade
    - drive_id: [YOUR_ID]
    - api_key: [YOUR_API_KEY]
    Keep this "Shade" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Modification times and hashes

Shade does not support hashes and writing mod times.

Transfers

Shade uses multipart uploads by default. This means that files will be
chunked and sent up to Shade concurrently. In order to configure how
many simultaneous uploads you want to use, upload the 'concurrency'
option in the advanced config section. Note that this uses more memory
and initiates more http requests.

Deleting files

Please note that when deleting files in Shade via rclone it will delete
the file instantly, instead of sending it to the trash. This means that
it will not be recoverable.

Standard options

Here are the Standard options specific to shade (Shade FS).

--shade-drive-id

The ID of your drive, see this in the drive settings. Individual rclone
configs must be made per drive.

Properties:

-   Config: drive_id
-   Env Var: RCLONE_SHADE_DRIVE_ID
-   Type: string
-   Required: true

--shade-api-key

An API key for your account.

Properties:

-   Config: api_key
-   Env Var: RCLONE_SHADE_API_KEY
-   Type: string
-   Required: true

Advanced options

Here are the Advanced options specific to shade (Shade FS).

--shade-endpoint

Endpoint for the service.

Leave blank normally.

Properties:

-   Config: endpoint
-   Env Var: RCLONE_SHADE_ENDPOINT
-   Type: string
-   Required: false

--shade-chunk-size

Chunk size to use for uploading.

Any files larger than this will be uploaded in chunks of this size.

Note that this is stored in memory per transfer, so increasing it will
increase memory usage.

Minimum is 5MB, maximum is 5GB.

Properties:

-   Config: chunk_size
-   Env Var: RCLONE_SHADE_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 64Mi

--shade-upload-concurrency

Concurrency for multipart uploads and copies. This is the number of
chunks of the same file that are uploaded concurrently for multipart
uploads and copies.

Properties:

-   Config: upload_concurrency
-   Env Var: RCLONE_SHADE_UPLOAD_CONCURRENCY
-   Type: int
-   Default: 4

--shade-max-upload-parts

Maximum amount of parts in a multipart upload.

Properties:

-   Config: max_upload_parts
-   Env Var: RCLONE_SHADE_MAX_UPLOAD_PARTS
-   Type: int
-   Default: 10000

--shade-token

JWT Token for performing Shade FS operations. Don't set this value -
rclone will set it automatically

Properties:

-   Config: token
-   Env Var: RCLONE_SHADE_TOKEN
-   Type: string
-   Required: false

--shade-token-expiry

JWT Token Expiration time. Don't set this value - rclone will set it
automatically

Properties:

-   Config: token_expiry
-   Env Var: RCLONE_SHADE_TOKEN_EXPIRY
-   Type: string
-   Required: false

--shade-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_SHADE_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--shade-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SHADE_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Note that Shade is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".

Shade only supports filenames up to 255 characters in length.

rclone about is not supported by the Shade backend. Backends without
this capability cannot determine free space for an rclone mount or use
policy mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about

Backend commands

Here are the commands specific to the shade backend.

Run them with

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

SMB

SMB is a communication protocol to share files over network.

This relies on go-smb2 library for communication with SMB protocol.

Paths are specified as remote:sharename (or remote: for the lsd
command.) You may put subdirectories in too, e.g.
remote:item/path/to/dir.

Notes

The first path segment must be the name of the share, which you entered
when you started to share on Windows. On smbd, it's the section title in
smb.conf (usually in /etc/samba/) file. You can find shares by querying
the root if you're unsure (e.g. rclone lsd remote:).

You can't access the shared printers from rclone, obviously.

You can't use Anonymous access for logging in. You have to use the guest
user with an empty password instead. The rclone client tries to avoid
8.3 names when uploading files by encoding trailing spaces and periods.
Alternatively, the local backend on Windows can access SMB servers using
UNC paths, by \\server\share. This doesn't apply to non-Windows OSes,
such as Linux and macOS.

Configuration

Here is an example of making a SMB configuration.

First run

    rclone config

This will guide you through an interactive setup process.

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Option Storage.
    Type of storage to configure.
    Choose a number from below, or type in your own value.
    XX / SMB / CIFS
       \ (smb)
    Storage> smb

    Option host.
    Samba hostname to connect to.
    E.g. "example.com".
    Enter a value.
    host> localhost

    Option user.
    Samba username.
    Enter a string value. Press Enter for the default (lesmi).
    user> guest

    Option port.
    Samba port number.
    Enter a signed integer. Press Enter for the default (445).
    port> 

    Option pass.
    Samba password.
    Choose an alternative below. Press Enter for the default (n).
    y) Yes, type in my own password
    g) Generate random password
    n) No, leave this optional password blank (default)
    y/g/n> g
    Password strength in bits.
    64 is just about memorable
    128 is secure
    1024 is the maximum
    Bits> 64
    Your password is: XXXX
    Use this password? Please note that an obscured version of this 
    password (and not the password itself) will be stored under your 
    configuration file, so keep this generated password in a safe place.
    y) Yes (default)
    n) No
    y/n> y

    Option domain.
    Domain name for NTLM authentication.
    Enter a string value. Press Enter for the default (WORKGROUP).
    domain> 

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Configuration complete.
    Options:
    - type: samba
    - host: localhost
    - user: guest
    - pass: *** ENCRYPTED ***
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> d

Standard options

Here are the Standard options specific to smb (SMB / CIFS).

--smb-host

SMB server hostname to connect to.

E.g. "example.com".

Properties:

-   Config: host
-   Env Var: RCLONE_SMB_HOST
-   Type: string
-   Required: true

--smb-user

SMB username.

Properties:

-   Config: user
-   Env Var: RCLONE_SMB_USER
-   Type: string
-   Default: "$USER"

--smb-port

SMB port number.

Properties:

-   Config: port
-   Env Var: RCLONE_SMB_PORT
-   Type: int
-   Default: 445

--smb-pass

SMB password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_SMB_PASS
-   Type: string
-   Required: false

--smb-domain

Domain name for NTLM authentication.

Properties:

-   Config: domain
-   Env Var: RCLONE_SMB_DOMAIN
-   Type: string
-   Default: "WORKGROUP"

--smb-spn

Service principal name.

Rclone presents this name to the server. Some servers use this as
further authentication, and it often needs to be set for clusters. For
example:

    cifs/remotehost:1020

Leave blank if not sure.

Properties:

-   Config: spn
-   Env Var: RCLONE_SMB_SPN
-   Type: string
-   Required: false

--smb-use-kerberos

Use Kerberos authentication.

If set, rclone will use Kerberos authentication instead of NTLM. This
requires a valid Kerberos configuration and credentials cache to be
available, either in the default locations or as specified by the
KRB5_CONFIG and KRB5CCNAME environment variables.

Properties:

-   Config: use_kerberos
-   Env Var: RCLONE_SMB_USE_KERBEROS
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to smb (SMB / CIFS).

--smb-idle-timeout

Max time before closing idle connections.

If no connections have been returned to the connection pool in the time
given, rclone will empty the connection pool.

Set to 0 to keep connections indefinitely.

Properties:

-   Config: idle_timeout
-   Env Var: RCLONE_SMB_IDLE_TIMEOUT
-   Type: Duration
-   Default: 1m0s

--smb-hide-special-share

Hide special shares (e.g. print$) which users aren't supposed to access.

Properties:

-   Config: hide_special_share
-   Env Var: RCLONE_SMB_HIDE_SPECIAL_SHARE
-   Type: bool
-   Default: true

--smb-case-insensitive

Whether the server is configured to be case-insensitive.

Always true on Windows shares.

Properties:

-   Config: case_insensitive
-   Env Var: RCLONE_SMB_CASE_INSENSITIVE
-   Type: bool
-   Default: true

--smb-kerberos-ccache

Path to the Kerberos credential cache (krb5cc).

Overrides the default KRB5CCNAME environment variable and allows this
instance of the SMB backend to use a different Kerberos cache file. This
is useful when mounting multiple SMB with different credentials or
running in multi-user environments.

Supported formats: - FILE:/path/to/ccache – Use the specified file. -
DIR:/path/to/ccachedir – Use the primary file inside the specified
directory. - /path/to/ccache – Interpreted as a file path.

Properties:

-   Config: kerberos_ccache
-   Env Var: RCLONE_SMB_KERBEROS_CCACHE
-   Type: string
-   Required: false

--smb-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_SMB_ENCODING
-   Type: Encoding
-   Default:
    Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,RightSpace,RightPeriod,InvalidUtf8,Dot

--smb-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SMB_DESCRIPTION
-   Type: string
-   Required: false

Storj

Storj is redefining the cloud to support the future of data—sustainably
and economically. Storj leverages the vast global supply of
underutilized resources to deliver better security, durability, and
performance services. Experience up to 90% lower costs and carbon
reduction with Storj.

Storj is an encrypted, secure, and cost-effective object storage service
that enables you to store, back up, and archive large amounts of data in
a decentralized manner.

Backend options

Storj can be used both with this native backend and with the s3 backend
using the Storj S3 compatible gateway (shared or private).

Use this backend to take advantage of client-side encryption as well as
to achieve the best possible download performance. Uploads will be
erasure-coded locally, thus a 1gb upload will result in 2.68gb of data
being uploaded to storage nodes across the network.

Use the s3 backend and one of the S3 compatible Hosted Gateways to
increase upload performance and reduce the load on your systems and
network. Uploads will be encrypted and erasure-coded server-side, thus a
1GB upload will result in only in 1GB of data being uploaded to storage
nodes across the network.

Side by side comparison with more details:

-   Characteristics:
    -   Storj backend: Uses native RPC protocol, connects directly to
        the storage nodes which hosts the data. Requires more CPU
        resource of encoding/decoding and has network amplification
        (especially during the upload), uses lots of TCP connections
    -   S3 backend: Uses S3 compatible HTTP Rest API via the shared
        gateways. There is no network amplification, but performance
        depends on the shared gateways and the secret encryption key is
        shared with the gateway.
-   Typical usage:
    -   Storj backend: Server environments and desktops with enough
        resources, internet speed and connectivity - and applications
        where storjs client-side encryption is required.
    -   S3 backend: Desktops and similar with limited resources,
        internet speed or connectivity.
-   Security:
    -   Storj backend: strong. Private encryption key doesn't need to
        leave the local computer.
    -   S3 backend: weaker. Private encryption key is shared with the
        authentication service of the hosted gateway, where it's stored
        encrypted. It can be stronger when combining with the rclone
        crypt backend.
-   Bandwidth usage (upload):
    -   Storj backend: higher. As data is erasure coded on the client
        side both the original data and the parities should be uploaded.
        About ~2.7 times more data is required to be uploaded. Client
        may start to upload with even higher number of nodes (~3.7 times
        more) and abandon/stop the slow uploads.
    -   S3 backend: normal. Only the raw data is uploaded, erasure
        coding happens on the gateway.
-   Bandwidth usage (download)
    -   Storj backend: almost normal. Only the minimal number of data is
        required, but to avoid very slow data providers a few more
        sources are used and the slowest are ignored (max 1.2x
        overhead).
    -   S3 backend: normal. Only the raw data is downloaded, erasure
        coding happens on the shared gateway.
-   CPU usage:
    -   Storj backend: higher, but more predictable. Erasure code and
        encryption/decryption happens locally which requires significant
        CPU usage.
    -   S3 backend: less. Erasure code and encryption/decryption happens
        on shared s3 gateways (and as is, it depends on the current load
        on the gateways)
-   TCP connection usage:
    -   Storj backend: high. A direct connection is required to each of
        the Storj nodes resulting in 110 connections on upload and 35 on
        download per 64 MB segment. Not all the connections are actively
        used (slow ones are pruned), but they are all opened. Adjusting
        the max open file limit may be required.
    -   S3 backend: normal. Only one connection per download/upload
        thread is required to the shared gateway.
-   Overall performance:
    -   Storj backend: with enough resources (CPU and bandwidth) storj
        backend can provide even 2x better performance. Data is directly
        downloaded to / uploaded from to the client instead of the
        gateway.
    -   S3 backend: Can be faster on edge devices where CPU and network
        bandwidth is limited as the shared S3 compatible gateways take
        care about the encrypting/decryption and erasure coding and no
        download/upload amplification.
-   Decentralization:
    -   Storj backend: high. Data is downloaded directly from the
        distributed cloud of storage providers.
    -   S3 backend: low. Requires a running S3 gateway (either
        self-hosted or Storj-hosted).
-   Limitations:
    -   Storj backend: rclone checksum is not possible without download,
        as checksum metadata is not calculated during upload
    -   S3 backend: secret encryption key is shared with the gateway

Configuration

To make a new Storj configuration you need one of the following:

-   Access Grant that someone else shared with you.
-   API Key of a Storj project you are a member of.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

Setup with access grant

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Storj Decentralized Cloud Storage
       \ "storj"
    [snip]
    Storage> storj
    ** See help for storj backend at: https://rclone.org/storj/ **

    Choose an authentication method.
    Enter a string value. Press Enter for the default ("existing").
    Choose a number from below, or type in your own value
     1 / Use an existing access grant.
       \ "existing"
     2 / Create a new access grant from satellite address, API key, and passphrase.
       \ "new"
    provider> existing
    Access Grant.
    Enter a string value. Press Enter for the default ("").
    access_grant> your-access-grant-received-by-someone-else
    Remote config
    Configuration complete.
    Options:
    - type: storj
    - access_grant: your-access-grant-received-by-someone-else
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Setup with API key and passphrase

    No remotes found, make a new one\?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Storj Decentralized Cloud Storage
       \ "storj"
    [snip]
    Storage> storj
    ** See help for storj backend at: https://rclone.org/storj/ **

    Choose an authentication method.
    Enter a string value. Press Enter for the default ("existing").
    Choose a number from below, or type in your own value
     1 / Use an existing access grant.
       \ "existing"
     2 / Create a new access grant from satellite address, API key, and passphrase.
       \ "new"
    provider> new
    Satellite Address. Custom satellite address should match the format: `<nodeid>@<address>:<port>`.
    Enter a string value. Press Enter for the default ("us1.storj.io").
    Choose a number from below, or type in your own value
     1 / US1
       \ "us1.storj.io"
     2 / EU1
       \ "eu1.storj.io"
     3 / AP1
       \ "ap1.storj.io"
    satellite_address> 1
    API Key.
    Enter a string value. Press Enter for the default ("").
    api_key> your-api-key-for-your-storj-project
    Encryption Passphrase. To access existing objects enter passphrase used for uploading.
    Enter a string value. Press Enter for the default ("").
    passphrase> your-human-readable-encryption-passphrase
    Remote config
    Configuration complete.
    Options:
    - type: storj
    - satellite_address: 12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S@us1.storj.io:7777
    - api_key: your-api-key-for-your-storj-project
    - passphrase: your-human-readable-encryption-passphrase
    - access_grant: the-access-grant-generated-from-the-api-key-and-passphrase
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Standard options

Here are the Standard options specific to storj (Storj Decentralized
Cloud Storage).

--storj-provider

Choose an authentication method.

Properties:

-   Config: provider
-   Env Var: RCLONE_STORJ_PROVIDER
-   Type: string
-   Default: "existing"
-   Examples:
    -   "existing"
        -   Use an existing access grant.
    -   "new"
        -   Create a new access grant from satellite address, API key,
            and passphrase.

--storj-access-grant

Access grant.

Properties:

-   Config: access_grant
-   Env Var: RCLONE_STORJ_ACCESS_GRANT
-   Provider: existing
-   Type: string
-   Required: false

--storj-satellite-address

Satellite address.

Custom satellite address should match the format:
<nodeid>@<address>:<port>.

Properties:

-   Config: satellite_address
-   Env Var: RCLONE_STORJ_SATELLITE_ADDRESS
-   Provider: new
-   Type: string
-   Default: "us1.storj.io"
-   Examples:
    -   "us1.storj.io"
        -   US1
    -   "eu1.storj.io"
        -   EU1
    -   "ap1.storj.io"
        -   AP1

--storj-api-key

API key.

Properties:

-   Config: api_key
-   Env Var: RCLONE_STORJ_API_KEY
-   Provider: new
-   Type: string
-   Required: false

--storj-passphrase

Encryption passphrase.

To access existing objects enter passphrase used for uploading.

Properties:

-   Config: passphrase
-   Env Var: RCLONE_STORJ_PASSPHRASE
-   Provider: new
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to storj (Storj Decentralized
Cloud Storage).

--storj-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_STORJ_DESCRIPTION
-   Type: string
-   Required: false

Usage

Paths are specified as remote:bucket (or remote: for the lsf command.)
You may put subdirectories in too, e.g. remote:bucket/path/to/dir.

Once configured you can then use rclone like this.

Create a new bucket

Use the mkdir command to create new bucket, e.g. bucket.

    rclone mkdir remote:bucket

List all buckets

Use the lsf command to list all buckets.

    rclone lsf remote:

Note the colon (:) character at the end of the command line.

Delete a bucket

Use the rmdir command to delete an empty bucket.

    rclone rmdir remote:bucket

Use the purge command to delete a non-empty bucket with all its content.

    rclone purge remote:bucket

Upload objects

Use the copy command to upload an object.

    rclone copy --progress /home/local/directory/file.ext remote:bucket/path/to/dir/

The --progress flag is for displaying progress information. Remove it if
you don't need this information.

Use a folder in the local path to upload all its objects.

    rclone copy --progress /home/local/directory/ remote:bucket/path/to/dir/

Only modified files will be copied.

List objects

Use the ls command to list recursively all objects in a bucket.

    rclone ls remote:bucket

Add the folder to the remote path to list recursively all objects in
this folder.

    $ rclone ls remote:bucket
    /path/to/dir/

Use the lsf command to list non-recursively all objects in a bucket or a
folder.

    rclone lsf remote:bucket/path/to/dir/

Download objects

Use the copy command to download an object.

    rclone copy --progress remote:bucket/path/to/dir/file.ext /home/local/directory/

The --progress flag is for displaying progress information. Remove it if
you don't need this information.

Use a folder in the remote path to download all its objects.

    rclone copy --progress remote:bucket/path/to/dir/ /home/local/directory/

Delete objects

Use the deletefile command to delete a single object.

    rclone deletefile remote:bucket/path/to/dir/file.ext

Use the delete command to delete all object in a folder.

    rclone delete remote:bucket/path/to/dir/

Print the total size of objects

Use the size command to print the total size of objects in a bucket or a
folder.

    rclone size remote:bucket/path/to/dir/

Sync two Locations

Use the sync command to sync the source to the destination, changing the
destination only, deleting any excess files.

    rclone sync --interactive --progress /home/local/directory/ remote:bucket/path/to/dir/

The --progress flag is for displaying progress information. Remove it if
you don't need this information.

Since this can cause data loss, test first with the --dry-run flag to
see exactly what would be copied and deleted.

The sync can be done also from Storj to the local file system.

    rclone sync --interactive --progress remote:bucket/path/to/dir/ /home/local/directory/

Or between two Storj buckets.

    rclone sync --interactive --progress remote-us:bucket/path/to/dir/ remote-europe:bucket/path/to/dir/

Or even between another cloud storage and Storj.

    rclone sync --interactive --progress s3:bucket/path/to/dir/ storj:bucket/path/to/dir/

Limitations

rclone about is not supported by the rclone Storj backend. Backends
without this capability cannot determine free space for an rclone mount
or use policy mfs (most free space) as a member of an rclone union
remote.

See List of backends that do not support rclone about and rclone about.

Known issues

If you get errors like too many open files this usually happens when the
default ulimit for system max open files is exceeded. Native Storj
protocol opens a large number of TCP connections (each of which is
counted as an open file). For a single upload stream you can expect 110
TCP connections to be opened. For a single download stream you can
expect 35. This batch of connections will be opened for every 64 MiB
segment and you should also expect TCP connections to be reused. If you
do many transfers you eventually open a connection to most storage nodes
(thousands of nodes).

To fix these, please raise your system limits. You can do this issuing a
ulimit -n 65536 just before you run rclone. To change the limits more
permanently you can add this to your shell startup script, e.g.
$HOME/.bashrc, or change the system-wide configuration, usually
/etc/sysctl.conf and/or /etc/security/limits.conf, but please refer to
your operating system manual.

SugarSync

SugarSync is a cloud service that enables active synchronization of
files across computers and other devices for file backup, access,
syncing, and sharing.

Configuration

The initial setup for SugarSync involves getting a token from SugarSync
which you can do with rclone. rclone config walks you through it.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Sugarsync
       \ "sugarsync"
    [snip]
    Storage> sugarsync
    ** See help for sugarsync backend at: https://rclone.org/sugarsync/ **

    Sugarsync App ID.
    Leave blank to use rclone's.
    Enter a string value. Press Enter for the default ("").
    app_id> 
    Sugarsync Access Key ID.
    Leave blank to use rclone's.
    Enter a string value. Press Enter for the default ("").
    access_key_id> 
    Sugarsync Private Access Key
    Leave blank to use rclone's.
    Enter a string value. Press Enter for the default ("").
    private_access_key> 
    Permanently delete files if true
    otherwise put them in the deleted files.
    Enter a boolean value (true or false). Press Enter for the default ("false").
    hard_delete> 
    Edit advanced config? (y/n)
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    Username (email address)> nick@craig-wood.com
    Your Sugarsync password is only required during setup and will not be stored.
    password:
    Configuration complete.
    Options:
    - type: sugarsync
    - refresh_token: https://api.sugarsync.com/app-authorization/XXXXXXXXXXXXXXXXXX
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Note that the config asks for your email and password but doesn't store
them, it only uses them to get the initial token.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories (sync folders) in top level of your SugarSync

    rclone lsd remote:

List all the files in your SugarSync folder "Test"

    rclone ls remote:Test

To copy a local directory to an SugarSync folder called backup

    rclone copy /home/source remote:backup

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

NB you can't create files in the top level folder you have to create a
folder, which rclone will create as a "Sync Folder" with SugarSync.

Modification times and hashes

SugarSync does not support modification times or hashes, therefore
syncing will default to --size-only checking. Note that using --update
will work as rclone can read the time files were uploaded.

Restricted filename characters

SugarSync replaces the default restricted characters set except for DEL.

Invalid UTF-8 bytes will also be replaced, as they can't be used in XML
strings.

Deleting files

Deleted files will be moved to the "Deleted items" folder by default.

However you can supply the flag --sugarsync-hard-delete or set the
config parameter hard_delete = true if you would like files to be
deleted straight away.

Standard options

Here are the Standard options specific to sugarsync (Sugarsync).

--sugarsync-app-id

Sugarsync App ID.

Leave blank to use rclone's.

Properties:

-   Config: app_id
-   Env Var: RCLONE_SUGARSYNC_APP_ID
-   Type: string
-   Required: false

--sugarsync-access-key-id

Sugarsync Access Key ID.

Leave blank to use rclone's.

Properties:

-   Config: access_key_id
-   Env Var: RCLONE_SUGARSYNC_ACCESS_KEY_ID
-   Type: string
-   Required: false

--sugarsync-private-access-key

Sugarsync Private Access Key.

Leave blank to use rclone's.

Properties:

-   Config: private_access_key
-   Env Var: RCLONE_SUGARSYNC_PRIVATE_ACCESS_KEY
-   Type: string
-   Required: false

--sugarsync-hard-delete

Permanently delete files if true otherwise put them in the deleted
files.

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_SUGARSYNC_HARD_DELETE
-   Type: bool
-   Default: false

Advanced options

Here are the Advanced options specific to sugarsync (Sugarsync).

--sugarsync-refresh-token

Sugarsync refresh token.

Leave blank normally, will be auto configured by rclone.

Properties:

-   Config: refresh_token
-   Env Var: RCLONE_SUGARSYNC_REFRESH_TOKEN
-   Type: string
-   Required: false

--sugarsync-authorization

Sugarsync authorization.

Leave blank normally, will be auto configured by rclone.

Properties:

-   Config: authorization
-   Env Var: RCLONE_SUGARSYNC_AUTHORIZATION
-   Type: string
-   Required: false

--sugarsync-authorization-expiry

Sugarsync authorization expiry.

Leave blank normally, will be auto configured by rclone.

Properties:

-   Config: authorization_expiry
-   Env Var: RCLONE_SUGARSYNC_AUTHORIZATION_EXPIRY
-   Type: string
-   Required: false

--sugarsync-user

Sugarsync user.

Leave blank normally, will be auto configured by rclone.

Properties:

-   Config: user
-   Env Var: RCLONE_SUGARSYNC_USER
-   Type: string
-   Required: false

--sugarsync-root-id

Sugarsync root id.

Leave blank normally, will be auto configured by rclone.

Properties:

-   Config: root_id
-   Env Var: RCLONE_SUGARSYNC_ROOT_ID
-   Type: string
-   Required: false

--sugarsync-deleted-id

Sugarsync deleted folder id.

Leave blank normally, will be auto configured by rclone.

Properties:

-   Config: deleted_id
-   Env Var: RCLONE_SUGARSYNC_DELETED_ID
-   Type: string
-   Required: false

--sugarsync-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_SUGARSYNC_ENCODING
-   Type: Encoding
-   Default: Slash,Ctl,InvalidUtf8,Dot

--sugarsync-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_SUGARSYNC_DESCRIPTION
-   Type: string
-   Required: false

Limitations

rclone about is not supported by the SugarSync backend. Backends without
this capability cannot determine free space for an rclone mount or use
policy mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Uloz.to

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

The initial setup for Uloz.to involves filling in the user credentials.
rclone config walks you through it.

Configuration

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Uloz.to
       \ "ulozto"
    [snip]
    Storage> ulozto

    Option app_token.
    The application token identifying the app. An app API key can be either found in the API doc 
    https://uloz.to/upload-resumable-api-beta or obtained from customer service.
    Enter a value. Press Enter to leave empty.
    app_token> token_value

    Option username.
    The username of the principal to operate as.
    Enter a value. Press Enter to leave empty.
    username> user

    Option password.
    The password for the user.
    Choose an alternative below. Press Enter for the default (n).
    y) Yes, type in my own password
    g) Generate random password
    n) No, leave this optional password blank (default)
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:

    Edit advanced config?
    y) Yes
    n) No (default)
    y/n> n

    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List folders in root level folder:

    rclone lsd remote:

List all the files in your root folder:

    rclone ls remote:

To copy a local folder to a Uloz.to folder called backup:

    rclone copy /home/source remote:backup

User credentials

The only reliable method is to authenticate the user using username and
password. Uloz.to offers an API key as well, but it's reserved for the
use of Uloz.to's in-house application and using it in different
circumstances is unreliable.

Modification times and hashes

Uloz.to doesn't allow the user to set a custom modification time, or
retrieve the hashes after upload. As a result, the integration uses a
free form field the API provides to encode client-provided timestamps
and hashes. Timestamps are stored with microsecond precision.

A server calculated MD5 hash of the file is verified upon upload.
Afterwards, the backend only serves the client-side calculated hashes.
Hashes can also be retrieved upon creating a file download link, but
it's impractical for list-like use cases.

Restricted filename characters

In addition to the default restricted characters set the following
characters are also replaced:

  Character    Value   Replacement
  ----------- ------- -------------
  \            0x5C        ＼

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Transfers

All files are currently uploaded using a single HTTP request, so for
uploading large files a stable connection is necessary. Rclone will
upload up to --transfers chunks at the same time (shared among all
uploads).

Deleting files

By default, files are moved to the recycle bin whereas folders are
deleted immediately. Trashed files are permanently deleted after 30 days
in the recycle bin.

Emptying the trash is currently not implemented in rclone.

Root folder ID

You can set the root_folder_slug for rclone. This is the folder
(identified by its Folder slug) that rclone considers to be the root of
your Uloz.to drive.

Normally you will leave this blank and rclone will determine the correct
root to use itself. However you can set this to restrict rclone to a
specific folder hierarchy.

In order to do this you will have to find the Folder slug of the folder
you wish to use as root. This will be the last segment of the URL when
you open the relevant folder in the Uloz.to web interface.

For example, for exploring a folder with URL
https://uloz.to/fm/my-files/foobar, foobar should be used as the root
slug.

root_folder_slug can be used alongside a specific path in the remote
path. For example, if your remote's root_folder_slug corresponds to
/foo/bar, remote:baz/qux will refer to
ABSOLUTE_ULOZTO_ROOT/foo/bar/baz/qux.

Standard options

Here are the Standard options specific to ulozto (Uloz.to).

--ulozto-app-token

The application token identifying the app. An app API key can be either
found in the API doc https://uloz.to/upload-resumable-api-beta or
obtained from customer service.

Properties:

-   Config: app_token
-   Env Var: RCLONE_ULOZTO_APP_TOKEN
-   Type: string
-   Required: false

--ulozto-username

The username of the principal to operate as.

Properties:

-   Config: username
-   Env Var: RCLONE_ULOZTO_USERNAME
-   Type: string
-   Required: false

--ulozto-password

The password for the user.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: password
-   Env Var: RCLONE_ULOZTO_PASSWORD
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to ulozto (Uloz.to).

--ulozto-root-folder-slug

If set, rclone will use this folder as the root folder for all
operations. For example, if the slug identifies 'foo/bar/', 'ulozto:baz'
is equivalent to 'ulozto:foo/bar/baz' without any root slug set.

Properties:

-   Config: root_folder_slug
-   Env Var: RCLONE_ULOZTO_ROOT_FOLDER_SLUG
-   Type: string
-   Required: false

--ulozto-list-page-size

The size of a single page for list commands. 1-500

Properties:

-   Config: list_page_size
-   Env Var: RCLONE_ULOZTO_LIST_PAGE_SIZE
-   Type: int
-   Default: 500

--ulozto-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_ULOZTO_ENCODING
-   Type: Encoding
-   Default: Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot

--ulozto-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_ULOZTO_DESCRIPTION
-   Type: string
-   Required: false

Limitations

Uloz.to file names can't have the \ character in. rclone maps this to
and from an identical looking unicode equivalent ＼ (U+FF3C Fullwidth
Reverse Solidus).

Uloz.to only supports filenames up to 255 characters in length.

Uloz.to rate limits access to the API, but exact details are
undisclosed. Practical testing reveals that hitting the rate limit
during normal use is very rare, although not impossible with higher
number of concurrently uploaded files.

rclone about is not supported by the Uloz.to backend. Although there's
an endpoint to retrieve the information for the UI, it's not exposed in
the API. Backends without this capability cannot determine free space
for an rclone mount or use policy mfs (most free space) as a member of
an rclone union remote.

See List of backends that do not support rclone about and rclone about.

Union

The union backend joins several remotes together to make a single
unified view of them.

During the initial setup with rclone config you will specify the
upstream remotes as a space separated list. The upstream remotes can
either be a local paths or other remotes.

The attributes :ro, :nc and :writeback can be attached to the end of the
remote to tag the remote as read only, no create or writeback, e.g.
remote:directory/subdirectory:ro or remote:directory/subdirectory:nc.

-   :ro means files will only be read from here and never written
-   :nc means new files or directories won't be created here
-   :writeback means files found in different remotes will be written
    back here. See the writeback section for more info.

Subfolders can be used in upstream remotes. Assume a union remote named
backup with the remotes mydrive:private/backup. Invoking
rclone mkdir backup:desktop is exactly the same as invoking
rclone mkdir mydrive:private/backup/desktop.

There is no special handling of paths containing .. segments. Invoking
rclone mkdir backup:../desktop is exactly the same as invoking
rclone mkdir mydrive:private/backup/../desktop.

Configuration

Here is an example of how to make a union called remote for local
folders. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Union merges the contents of several remotes
       \ "union"
    [snip]
    Storage> union
    List of space separated upstreams.
    Can be 'upstreama:test/dir upstreamb:', '\"upstreama:test/space:ro dir\" upstreamb:', etc.
    Enter a string value. Press Enter for the default ("").
    upstreams> remote1:dir1 remote2:dir2 remote3:dir3
    Policy to choose upstream on ACTION class.
    Enter a string value. Press Enter for the default ("epall").
    action_policy>
    Policy to choose upstream on CREATE class.
    Enter a string value. Press Enter for the default ("epmfs").
    create_policy>
    Policy to choose upstream on SEARCH class.
    Enter a string value. Press Enter for the default ("ff").
    search_policy>
    Cache time of usage and free space (in seconds). This option is only useful when a path preserving policy is used.
    Enter a signed integer. Press Enter for the default ("120").
    cache_time>
    Remote config
    Configuration complete.
    Options:
    - type: union
    - upstreams: remote1:dir1 remote2:dir2 remote3:dir3
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:

    Name                 Type
    ====                 ====
    remote               union

    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q

Once configured you can then use rclone like this:

List directories in top level in remote1:dir1, remote2:dir2 and
remote3:dir3

    rclone lsd remote:

List all the files in remote1:dir1, remote2:dir2 and remote3:dir3

    rclone ls remote:

Copy another local directory to the union directory called source, which
will be placed into remote3:dir3

    rclone copy C:\source remote:source

Behavior / Policies

The behavior of union backend is inspired by trapexit/mergerfs. All
functions are grouped into 3 categories: action, create and search.
These functions and categories can be assigned a policy which dictates
what file or directory is chosen when performing that behavior. Any
policy can be assigned to a function or category though some may not be
very useful in practice. For instance: rand (random) may be useful for
file creation (create) but could lead to very odd behavior if used for
delete if there were more than one copy of the file.

Function / Category classifications

  ----------------------------------------------------------------------------
  Category   Description     Functions
  ---------- --------------- -------------------------------------------------
  action     Writing         move, rmdir, rmdirs, delete, purge and copy, sync
             Existing file   (as destination when file exist)

  create     Create          copy, sync (as destination when file not exist)
             non-existing    
             file            

  search     Reading and     ls, lsd, lsl, cat, md5sum, sha1sum and copy, sync
             listing file    (as source)

  N/A                        size, about
  ----------------------------------------------------------------------------

Path Preservation

Policies, as described below, are of two basic types. path preserving
and non-path preserving.

All policies which start with ep (epff, eplfs, eplus, epmfs, eprand) are
path preserving. ep stands for existing path.

A path preserving policy will only consider upstreams where the relative
path being accessed already exists.

When using non-path preserving policies paths will be created in target
upstreams as necessary.

Quota Relevant Policies

Some policies rely on quota information. These policies should be used
only if your upstreams support the respective quota fields.

  Policy       Required Field
  ------------ ----------------
  lfs, eplfs   Free
  mfs, epmfs   Free
  lus, eplus   Used
  lno, eplno   Objects

To check if your upstream supports the field, run
rclone about remote: [flags] and see if the required field exists.

Filters

Policies basically search upstream remotes and create a list of files /
paths for functions to work on. The policy is responsible for filtering
and sorting. The policy type defines the sorting but filtering is mostly
uniform as described below.

-   No search policies filter.
-   All action policies will filter out remotes which are tagged as
    read-only.
-   All create policies will filter out remotes which are tagged
    read-only or no-create.

If all remotes are filtered an error will be returned.

Policy descriptions

The policies definition are inspired by trapexit/mergerfs but not
exactly the same. Some policy definition could be different due to the
much larger latency of remote file systems.

  -----------------------------------------------------------------------
  Policy           Description
  ---------------- ------------------------------------------------------
  all              Search category: same as epall. Action category: same
                   as epall. Create category: act on all upstreams.

  epall (existing  Search category: Given this order configured, act on
  path, all)       the first one found where the relative path exists.
                   Action category: apply to all found. Create category:
                   act on all upstreams where the relative path exists.

  epff (existing   Act on the first one found, by the time upstreams
  path, first      reply, where the relative path exists.
  found)           

  eplfs (existing  Of all the upstreams on which the relative path exists
  path, least free choose the one with the least free space.
  space)           

  eplus (existing  Of all the upstreams on which the relative path exists
  path, least used choose the one with the least used space.
  space)           

  eplno (existing  Of all the upstreams on which the relative path exists
  path, least      choose the one with the least number of objects.
  number of        
  objects)         

  epmfs (existing  Of all the upstreams on which the relative path exists
  path, most free  choose the one with the most free space.
  space)           

  eprand (existing Calls epall and then randomizes. Returns only one
  path, random)    upstream.

  ff (first found) Search category: same as epff. Action category: same
                   as epff. Create category: Act on the first one found
                   by the time upstreams reply.

  lfs (least free  Search category: same as eplfs. Action category: same
  space)           as eplfs. Create category: Pick the upstream with the
                   least available free space.

  lus (least used  Search category: same as eplus. Action category: same
  space)           as eplus. Create category: Pick the upstream with the
                   least used space.

  lno (least       Search category: same as eplno. Action category: same
  number of        as eplno. Create category: Pick the upstream with the
  objects)         least number of objects.

  mfs (most free   Search category: same as epmfs. Action category: same
  space)           as epmfs. Create category: Pick the upstream with the
                   most available free space.

  newest           Pick the file / directory with the largest mtime.

  rand (random)    Calls all and then randomizes. Returns only one
                   upstream.
  -----------------------------------------------------------------------

Writeback

The tag :writeback on an upstream remote can be used to make a simple
cache system like this:

    [union]
    type = union
    action_policy = all
    create_policy = all
    search_policy = ff
    upstreams = /local:writeback remote:dir

When files are opened for read, if the file is in remote:dir but not
/local then rclone will copy the file entirely into /local before
returning a reference to the file in /local. The copy will be done with
the equivalent of rclone copy so will use --multi-thread-streams if
configured. Any copies will be logged with an INFO log.

When files are written, they will be written to both remote:dir and
/local.

As many remotes as desired can be added to upstreams but there should
only be one :writeback tag.

Rclone does not manage the :writeback remote in any way other than
writing files back to it. So if you need to expire old files or manage
the size then you will have to do this yourself.

Standard options

Here are the Standard options specific to union (Union merges the
contents of several upstream fs).

--union-upstreams

List of space separated upstreams.

Can be 'upstreama:test/dir upstreamb:', '"upstreama:test/space:ro dir"
upstreamb:', etc.

Properties:

-   Config: upstreams
-   Env Var: RCLONE_UNION_UPSTREAMS
-   Type: string
-   Required: true

--union-action-policy

Policy to choose upstream on ACTION category.

Properties:

-   Config: action_policy
-   Env Var: RCLONE_UNION_ACTION_POLICY
-   Type: string
-   Default: "epall"

--union-create-policy

Policy to choose upstream on CREATE category.

Properties:

-   Config: create_policy
-   Env Var: RCLONE_UNION_CREATE_POLICY
-   Type: string
-   Default: "epmfs"

--union-search-policy

Policy to choose upstream on SEARCH category.

Properties:

-   Config: search_policy
-   Env Var: RCLONE_UNION_SEARCH_POLICY
-   Type: string
-   Default: "ff"

--union-cache-time

Cache time of usage and free space (in seconds).

This option is only useful when a path preserving policy is used.

Properties:

-   Config: cache_time
-   Env Var: RCLONE_UNION_CACHE_TIME
-   Type: int
-   Default: 120

Advanced options

Here are the Advanced options specific to union (Union merges the
contents of several upstream fs).

--union-min-free-space

Minimum viable free space for lfs/eplfs policies.

If a remote has less than this much free space then it won't be
considered for use in lfs or eplfs policies.

Properties:

-   Config: min_free_space
-   Env Var: RCLONE_UNION_MIN_FREE_SPACE
-   Type: SizeSuffix
-   Default: 1Gi

--union-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_UNION_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Any metadata supported by the underlying remote is read and written.

See the metadata docs for more info.

WebDAV

Paths are specified as remote:path

Paths may be as deep as required, e.g. remote:directory/subdirectory.

Configuration

To configure the WebDAV remote you will need to have a URL for it, and a
username and password. If you know what kind of system you are
connecting to then rclone can enable extra features.

Here is an example of how to make a remote called remote. First run:

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / WebDAV
       \ "webdav"
    [snip]
    Storage> webdav
    URL of http host to connect to
    Choose a number from below, or type in your own value
     1 / Connect to example.com
       \ "https://example.com"
    url> https://example.com/remote.php/webdav/
    Name of the WebDAV site/service/software you are using
    Choose a number from below, or type in your own value
     1 / Fastmail Files
       \ (fastmail)
     2 / Nextcloud
       \ (nextcloud)
     3 / Owncloud
       \ (owncloud)
     4 / Sharepoint Online, authenticated by Microsoft account
       \ (sharepoint)
     5 / Sharepoint with NTLM authentication, usually self-hosted or on-premises
       \ (sharepoint-ntlm)
     6 / rclone WebDAV server to serve a remote over HTTP via the WebDAV protocol
       \ (rclone)
     7 / Other site/service or software
       \ (other)
    vendor> 2
    User name
    user> user
    Password.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Bearer token instead of user/pass (e.g. a Macaroon)
    bearer_token>
    Remote config
    Configuration complete.
    Options:
    - type: webdav
    - url: https://example.com/remote.php/webdav/
    - vendor: nextcloud
    - user: user
    - pass: *** ENCRYPTED ***
    - bearer_token:
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

List directories in top level of your WebDAV

    rclone lsd remote:

List all the files in your WebDAV

    rclone ls remote:

To copy a local directory to an WebDAV directory called backup

    rclone copy /home/source remote:backup

Modification times and hashes

Plain WebDAV does not support modified times. However when used with
Fastmail Files, ownCloud or Nextcloud rclone will support modified
times.

Likewise plain WebDAV does not support hashes, however when used with
Fastmail Files, ownCloud or Nextcloud rclone will support SHA1 and MD5
hashes. Depending on the exact version of ownCloud or Nextcloud hashes
may appear on all objects, or only on objects which had a hash uploaded
with them.

Standard options

Here are the Standard options specific to webdav (WebDAV).

--webdav-url

URL of http host to connect to.

E.g. https://example.com.

Properties:

-   Config: url
-   Env Var: RCLONE_WEBDAV_URL
-   Type: string
-   Required: true

--webdav-vendor

Name of the WebDAV site/service/software you are using.

Properties:

-   Config: vendor
-   Env Var: RCLONE_WEBDAV_VENDOR
-   Type: string
-   Required: false
-   Examples:
    -   "fastmail"
        -   Fastmail Files
    -   "nextcloud"
        -   Nextcloud
    -   "owncloud"
        -   Owncloud 10 PHP based WebDAV server
    -   "infinitescale"
        -   ownCloud Infinite Scale
    -   "sharepoint"
        -   Sharepoint Online, authenticated by Microsoft account
    -   "sharepoint-ntlm"
        -   Sharepoint with NTLM authentication, usually self-hosted or
            on-premises
    -   "rclone"
        -   rclone WebDAV server to serve a remote over HTTP via the
            WebDAV protocol
    -   "other"
        -   Other site/service or software

--webdav-user

User name.

In case NTLM authentication is used, the username should be in the
format 'Domain'.

Properties:

-   Config: user
-   Env Var: RCLONE_WEBDAV_USER
-   Type: string
-   Required: false

--webdav-pass

Password.

NB Input to this must be obscured - see rclone obscure.

Properties:

-   Config: pass
-   Env Var: RCLONE_WEBDAV_PASS
-   Type: string
-   Required: false

--webdav-bearer-token

Bearer token instead of user/pass (e.g. a Macaroon).

Properties:

-   Config: bearer_token
-   Env Var: RCLONE_WEBDAV_BEARER_TOKEN
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to webdav (WebDAV).

--webdav-bearer-token-command

Command to run to get a bearer token.

Properties:

-   Config: bearer_token_command
-   Env Var: RCLONE_WEBDAV_BEARER_TOKEN_COMMAND
-   Type: string
-   Required: false

--webdav-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Default encoding is
Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,Hash,Percent,BackSlash,Del,Ctl,LeftSpace,LeftTilde,RightSpace,RightPeriod,InvalidUtf8
for sharepoint-ntlm or identity otherwise.

Properties:

-   Config: encoding
-   Env Var: RCLONE_WEBDAV_ENCODING
-   Type: string
-   Required: false

--webdav-headers

Set HTTP headers for all transactions.

Use this to set additional HTTP headers for all transactions

The input format is comma separated list of key,value pairs. Standard
CSV encoding may be used.

For example, to set a Cookie use 'Cookie,name=value', or
'"Cookie","name=value"'.

You can set multiple headers, e.g.
'"Cookie","name=value","Authorization","xxx"'.

Properties:

-   Config: headers
-   Env Var: RCLONE_WEBDAV_HEADERS
-   Type: CommaSepList
-   Default:

--webdav-pacer-min-sleep

Minimum time to sleep between API calls.

Properties:

-   Config: pacer_min_sleep
-   Env Var: RCLONE_WEBDAV_PACER_MIN_SLEEP
-   Type: Duration
-   Default: 10ms

--webdav-nextcloud-chunk-size

Nextcloud upload chunk size.

We recommend configuring your NextCloud instance to increase the max
chunk size to 1 GB for better upload performances. See
https://docs.nextcloud.com/server/latest/admin_manual/configuration_files/big_file_upload_configuration.html#adjust-chunk-size-on-nextcloud-side

Set to 0 to disable chunked uploading.

Properties:

-   Config: nextcloud_chunk_size
-   Env Var: RCLONE_WEBDAV_NEXTCLOUD_CHUNK_SIZE
-   Type: SizeSuffix
-   Default: 10Mi

--webdav-owncloud-exclude-shares

Exclude ownCloud shares

Properties:

-   Config: owncloud_exclude_shares
-   Env Var: RCLONE_WEBDAV_OWNCLOUD_EXCLUDE_SHARES
-   Type: bool
-   Default: false

--webdav-owncloud-exclude-mounts

Exclude ownCloud mounted storages

Properties:

-   Config: owncloud_exclude_mounts
-   Env Var: RCLONE_WEBDAV_OWNCLOUD_EXCLUDE_MOUNTS
-   Type: bool
-   Default: false

--webdav-unix-socket

Path to a unix domain socket to dial to, instead of opening a TCP
connection directly

Properties:

-   Config: unix_socket
-   Env Var: RCLONE_WEBDAV_UNIX_SOCKET
-   Type: string
-   Required: false

--webdav-auth-redirect

Preserve authentication on redirect.

If the server redirects rclone to a new domain when it is trying to read
a file then normally rclone will drop the Authorization: header from the
request.

This is standard security practice to avoid sending your credentials to
an unknown webserver.

However this is desirable in some circumstances. If you are getting an
error like "401 Unauthorized" when rclone is attempting to read files
from the webdav server then you can try this option.

Properties:

-   Config: auth_redirect
-   Env Var: RCLONE_WEBDAV_AUTH_REDIRECT
-   Type: bool
-   Default: false

--webdav-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_WEBDAV_DESCRIPTION
-   Type: string
-   Required: false

Provider notes

See below for notes on specific providers.

Fastmail Files

Use https://webdav.fastmail.com/ or a subdirectory as the URL, and your
Fastmail email username@domain.tld as the username. Follow this
documentation to create an app password with access to Files (WebDAV)
and use this as the password.

Fastmail supports modified times using the X-OC-Mtime header.

ownCloud

Click on the settings cog in the bottom right of the page and this will
show the WebDAV URL that rclone needs in the config step. It will look
something like https://example.com/remote.php/webdav/.

ownCloud supports modified times using the X-OC-Mtime header.

Nextcloud

This is configured in an identical way to ownCloud. Note that Nextcloud
initially did not support streaming of files (rcat) whereas ownCloud
did, but this seems to be fixed as of 2020-11-27 (tested with rclone
v1.53.1 and Nextcloud Server v19).

ownCloud Infinite Scale

The WebDAV URL for Infinite Scale can be found in the details panel of
any space in Infinite Scale, if the display was enabled in the personal
settings of the user through a checkbox there.

Infinite Scale works with the chunking tus upload protocol. The chunk
size is currently fixed 10 MB.

Sharepoint Online

Rclone can be used with Sharepoint provided by OneDrive for Business or
Office365 Education Accounts. This feature is only needed for a few of
these Accounts, mostly Office365 Education ones. These accounts are
sometimes not verified by the domain owner github#1975

This means that these accounts can't be added using the official API
(other Accounts should work with the "onedrive" option). However, it is
possible to access them using webdav.

To use a sharepoint remote with rclone, add it like this: First, you
need to get your remote's URL:

-   Go here to open your OneDrive or to sign in
-   Now take a look at your address bar, the URL should look like this:
    https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/_layouts/15/onedrive.aspx

You'll only need this URL up to the email address. After that, you'll
most likely want to add "/Documents". That subdirectory contains the
actual data stored on your OneDrive.

Add the remote to rclone like this: Configure the url as
https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/Documents
and use your normal account email and password for user and pass. If you
have 2FA enabled, you have to generate an app password. Set the vendor
to sharepoint.

Your config file should look like this:

    [sharepoint]
    type = webdav
    url = https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/Documents
    vendor = sharepoint
    user = YourEmailAddress
    pass = encryptedpassword

Sharepoint with NTLM Authentication

Use this option in case your (hosted) Sharepoint is not tied to OneDrive
accounts and uses NTLM authentication.

To get the url configuration, similarly to the above, first navigate to
the desired directory in your browser to get the URL, then strip
everything after the name of the opened directory.

Example: If the URL is:
https://example.sharepoint.com/sites/12345/Documents/Forms/AllItems.aspx

The configuration to use would be:
https://example.sharepoint.com/sites/12345/Documents

Set the vendor to sharepoint-ntlm.

NTLM uses domain and user name combination for authentication, set user
to DOMAIN\username.

Your config file should look like this:

    [sharepoint]
    type = webdav
    url = https://[YOUR-DOMAIN]/some-path-to/Documents
    vendor = sharepoint-ntlm
    user = DOMAIN\user
    pass = encryptedpassword

Required Flags for SharePoint

As SharePoint does some special things with uploaded documents, you
won't be able to use the documents size or the documents hash to compare
if a file has been changed since the upload / which file is newer.

For Rclone calls copying files (especially Office files such as .docx,
.xlsx, etc.) from/to SharePoint (like copy, sync, etc.), you should
append these flags to ensure Rclone uses the "Last Modified" datetime
property to compare your documents:

    --ignore-size --ignore-checksum --update

Rclone

Use this option if you are hosting remotes over WebDAV provided by
rclone. Read rclone serve webdav for more details.

rclone serve supports modified times using the X-OC-Mtime header.

dCache

dCache is a storage system that supports many protocols and
authentication/authorisation schemes. For WebDAV clients, it allows
users to authenticate with username and password (BASIC), X.509,
Kerberos, and various bearer tokens, including Macaroons and
OpenID-Connect access tokens.

Configure as normal using the other type. Don't enter a username or
password, instead enter your Macaroon as the bearer_token.

The config will end up looking something like this.

    [dcache]
    type = webdav
    url = https://dcache...
    vendor = other
    user =
    pass =
    bearer_token = your-macaroon

There is a script that obtains a Macaroon from a dCache WebDAV endpoint,
and creates an rclone config file.

Macaroons may also be obtained from the dCacheView
web-browser/JavaScript client that comes with dCache.

OpenID-Connect

dCache also supports authenticating with OpenID-Connect access tokens.
OpenID-Connect is a protocol (based on OAuth 2.0) that allows services
to identify users who have authenticated with some central service.

Support for OpenID-Connect in rclone is currently achieved using another
software package called oidc-agent. This is a command-line tool that
facilitates obtaining an access token. Once installed and configured, an
access token is obtained by running the oidc-token command. The
following example shows a (shortened) access token obtained from the XDC
OIDC Provider.

    paul@celebrimbor:~$ oidc-token XDC
    eyJraWQ[...]QFXDt0
    paul@celebrimbor:~$

Note Before the oidc-token command will work, the refresh token must be
loaded into the oidc agent. This is done with the oidc-add command
(e.g., oidc-add XDC). This is typically done once per login session.
Full details on this and how to register oidc-agent with your OIDC
Provider are provided in the oidc-agent documentation.

The rclone bearer_token_command configuration option is used to fetch
the access token from oidc-agent.

Configure as a normal WebDAV endpoint, using the 'other' vendor, leaving
the username and password empty. When prompted, choose to edit the
advanced config and enter the command to get a bearer token (e.g.,
oidc-agent XDC).

The following example config shows a WebDAV endpoint that uses
oidc-agent to supply an access token from the XDC OIDC Provider.

    [dcache]
    type = webdav
    url = https://dcache.example.org/
    vendor = other
    bearer_token_command = oidc-token XDC

Yandex Disk

Yandex Disk is a cloud storage solution created by Yandex.

Configuration

Here is an example of making a yandex configuration. First run

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    n/s> n
    name> remote
    Type of storage to configure.
    Choose a number from below, or type in your own value
    [snip]
    XX / Yandex Disk
       \ "yandex"
    [snip]
    Storage> yandex
    Yandex Client Id - leave blank normally.
    client_id>
    Yandex Client Secret - leave blank normally.
    client_secret>
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes
    n) No
    y/n> y
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Configuration complete.
    Options:
    - type: yandex
    - client_id:
    - client_secret:
    - token: {"access_token":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","token_type":"OAuth","expiry":"2016-12-29T12:27:11.362788025Z"}
    Keep this "remote" remote?
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Note that rclone runs a webserver on your local machine to collect the
token as returned from Yandex Disk. This only runs from the moment it
opens your browser to the moment you get back the verification code.
This is on http://127.0.0.1:53682/ and this it may require you to
unblock it temporarily if you are running a host firewall.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

See top level directories

    rclone lsd remote:

Make a new directory

    rclone mkdir remote:directory

List the contents of a directory

    rclone ls remote:directory

Sync /home/local/directory to the remote path, deleting any excess files
in the path.

    rclone sync --interactive /home/local/directory remote:directory

Yandex paths may be as deep as required, e.g.
remote:directory/subdirectory.

Modification times and hashes

Modified times are supported and are stored accurate to 1 ns in custom
metadata called rclone_modified in RFC3339 with nanoseconds format.

The MD5 hash algorithm is natively supported by Yandex Disk.

Emptying Trash

If you wish to empty your trash you can use the rclone cleanup remote:
command which will permanently delete all your trashed files. This
command does not take any path arguments.

Quota information

To view your current quota you can use the rclone about remote: command
which will display your usage limit (quota) and the current usage.

Restricted filename characters

The default restricted characters set are replaced.

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON
strings.

Standard options

Here are the Standard options specific to yandex (Yandex Disk).

--yandex-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_YANDEX_CLIENT_ID
-   Type: string
-   Required: false

--yandex-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_YANDEX_CLIENT_SECRET
-   Type: string
-   Required: false

Advanced options

Here are the Advanced options specific to yandex (Yandex Disk).

--yandex-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_YANDEX_TOKEN
-   Type: string
-   Required: false

--yandex-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_YANDEX_AUTH_URL
-   Type: string
-   Required: false

--yandex-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_YANDEX_TOKEN_URL
-   Type: string
-   Required: false

--yandex-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_YANDEX_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--yandex-hard-delete

Delete files permanently rather than putting them into the trash.

Properties:

-   Config: hard_delete
-   Env Var: RCLONE_YANDEX_HARD_DELETE
-   Type: bool
-   Default: false

--yandex-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_YANDEX_ENCODING
-   Type: Encoding
-   Default: Slash,Del,Ctl,InvalidUtf8,Dot

--yandex-spoof-ua

Set the user agent to match an official version of the yandex disk
client. May help with upload performance.

Properties:

-   Config: spoof_ua
-   Env Var: RCLONE_YANDEX_SPOOF_UA
-   Type: bool
-   Default: true

--yandex-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_YANDEX_DESCRIPTION
-   Type: string
-   Required: false

Limitations

When uploading very large files (bigger than about 5 GiB) you will need
to increase the --timeout parameter. This is because Yandex pauses
(perhaps to calculate the MD5SUM for the entire file) before returning
confirmation that the file has been uploaded. The default handling of
timeouts in rclone is to assume a 5 minute pause is an error and close
the connection - you'll see net/http: timeout awaiting response headers
errors in the logs if this is happening. Setting the timeout to twice
the max size of file in GiB should be enough, so if you want to upload a
30 GiB file set a timeout of 2 * 30 = 60m, that is --timeout 60m.

Having a Yandex Mail account is mandatory to use the Yandex.Disk
subscription. Token generation will work without a mail account, but
Rclone won't be able to complete any actions.

    [403 - DiskUnsupportedUserAccountTypeError] User account type is not supported.

Zoho Workdrive

Zoho WorkDrive is a cloud storage solution created by Zoho.

Configuration

Here is an example of making a zoho configuration. First run

    rclone config

This will guide you through an interactive setup process:

    No remotes found, make a new one?
    n) New remote
    s) Set configuration password
    n/s> n
    name> remote
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
    [snip]
    XX / Zoho
       \ "zoho"
    [snip]
    Storage> zoho
    ** See help for zoho backend at: https://rclone.org/zoho/ **

    OAuth Client Id
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    client_id> 
    OAuth Client Secret
    Leave blank normally.
    Enter a string value. Press Enter for the default ("").
    client_secret> 
    Edit advanced config? (y/n)
    y) Yes
    n) No (default)
    y/n> n
    Remote config
    Use web browser to automatically authenticate rclone with remote?
     * Say Y if the machine running rclone has a web browser you can use
     * Say N if running rclone on a (remote) machine without web browser access
    If not sure try Y. If Y failed, try N.
    y) Yes (default)
    n) No
    y/n> 
    If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth?state=LVn0IHzxej1ZkmQw31d0wQ
    Log in and authorize rclone for access
    Waiting for code...
    Got code
    Choose a number from below, or type in your own value
     1 / MyTeam
       \ "4u28602177065ff22426787a6745dba8954eb"
    Enter a Team ID> 1
    Choose a number from below, or type in your own value
     1 / General
       \ "4u2869d2aa6fca04f4f2f896b6539243b85b1"
    Enter a Workspace ID> 1
    Configuration complete.
    Options:
    - type: zoho
    - token: {"access_token":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","token_type":"Zoho-oauthtoken","refresh_token":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","expiry":"2020-10-12T00:54:52.370275223+02:00"}
    - root_folder_id: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Keep this "remote" remote?
    y) Yes this is OK (default)
    e) Edit this remote
    d) Delete this remote
    y/e/d> 

See the remote setup docs for how to set it up on a machine without an
internet-connected web browser available.

Rclone runs a webserver on your local computer to collect the
authorization token from Zoho Workdrive. This is only from the moment
your browser is opened until the token is returned. The webserver runs
on http://127.0.0.1:53682/. If local port 53682 is protected by a
firewall you may need to temporarily unblock the firewall to complete
authorization.

Once configured you can then use rclone like this (replace remote with
the name you gave your remote):

See top level directories

    rclone lsd remote:

Make a new directory

    rclone mkdir remote:directory

List the contents of a directory

    rclone ls remote:directory

Sync /home/local/directory to the remote path, deleting any excess files
in the path.

    rclone sync --interactive /home/local/directory remote:directory

Zoho paths may be as deep as required, eg remote:directory/subdirectory.

Modification times and hashes

Modified times are currently not supported for Zoho Workdrive

No hash algorithms are supported.

Usage information

To view your current quota you can use the rclone about remote: command
which will display your current usage.

Restricted filename characters

Only control characters and invalid UTF-8 are replaced. In addition most
Unicode full-width characters are not supported at all and will be
removed from filenames during upload.

Standard options

Here are the Standard options specific to zoho (Zoho).

--zoho-client-id

OAuth Client Id.

Leave blank normally.

Properties:

-   Config: client_id
-   Env Var: RCLONE_ZOHO_CLIENT_ID
-   Type: string
-   Required: false

--zoho-client-secret

OAuth Client Secret.

Leave blank normally.

Properties:

-   Config: client_secret
-   Env Var: RCLONE_ZOHO_CLIENT_SECRET
-   Type: string
-   Required: false

--zoho-region

Zoho region to connect to.

You'll have to use the region your organization is registered in. If not
sure use the same top level domain as you connect to in your browser.

Properties:

-   Config: region
-   Env Var: RCLONE_ZOHO_REGION
-   Type: string
-   Required: false
-   Examples:
    -   "com"
        -   United states / Global
    -   "eu"
        -   Europe
    -   "in"
        -   India
    -   "jp"
        -   Japan
    -   "com.cn"
        -   China
    -   "com.au"
        -   Australia

Advanced options

Here are the Advanced options specific to zoho (Zoho).

--zoho-token

OAuth Access Token as a JSON blob.

Properties:

-   Config: token
-   Env Var: RCLONE_ZOHO_TOKEN
-   Type: string
-   Required: false

--zoho-auth-url

Auth server URL.

Leave blank to use the provider defaults.

Properties:

-   Config: auth_url
-   Env Var: RCLONE_ZOHO_AUTH_URL
-   Type: string
-   Required: false

--zoho-token-url

Token server url.

Leave blank to use the provider defaults.

Properties:

-   Config: token_url
-   Env Var: RCLONE_ZOHO_TOKEN_URL
-   Type: string
-   Required: false

--zoho-client-credentials

Use client credentials OAuth flow.

This will use the OAUTH2 client Credentials Flow as described in RFC
6749.

Note that this option is NOT supported by all backends.

Properties:

-   Config: client_credentials
-   Env Var: RCLONE_ZOHO_CLIENT_CREDENTIALS
-   Type: bool
-   Default: false

--zoho-upload-cutoff

Cutoff for switching to large file upload api (>= 10 MiB).

Properties:

-   Config: upload_cutoff
-   Env Var: RCLONE_ZOHO_UPLOAD_CUTOFF
-   Type: SizeSuffix
-   Default: 10Mi

--zoho-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_ZOHO_ENCODING
-   Type: Encoding
-   Default: Del,Ctl,InvalidUtf8

--zoho-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_ZOHO_DESCRIPTION
-   Type: string
-   Required: false

Setting up your own client_id

For Zoho we advise you to set up your own client_id. To do so you have
to complete the following steps.

1.  Log in to the Zoho API Console

2.  Create a new client of type "Server-based Application". The name and
    website don't matter, but you must add the redirect URL
    http://localhost:53682/.

3.  Once the client is created, you can go to the settings tab and
    enable it in other regions.

The client id and client secret can now be used with rclone.

Local Filesystem

Local paths are specified as normal filesystem paths, e.g.
/path/to/wherever, so

    rclone sync --interactive /home/source /tmp/destination

Will sync /home/source to /tmp/destination.

Configuration

For consistencies sake one can also configure a remote of type local in
the config file, and access the local filesystem using rclone remote
paths, e.g. remote:path/to/wherever, but it is probably easier not to.

Modification times

Rclone reads and writes the modification times using an accuracy
determined by the OS. Typically this is 1ns on Linux, 10 ns on Windows
and 1 Second on OS X.

Filenames

Filenames should be encoded in UTF-8 on disk. This is the normal case
for Windows and OS X.

There is a bit more uncertainty in the Linux world, but new
distributions will have UTF-8 encoded files names. If you are using an
old Linux filesystem with non UTF-8 file names (e.g. latin1) then you
can use the convmv tool to convert the filesystem to UTF-8. This tool is
available in most distributions' package managers.

If an invalid (non-UTF8) filename is read, the invalid characters will
be replaced with a quoted representation of the invalid bytes. The name
gro\xdf will be transferred as gro‛DF. rclone will emit a debug message
in this case (use -v to see), e.g.

    Local file system at .: Replacing invalid UTF-8 characters in "gro\xdf"

Restricted characters

With the local backend, restrictions on the characters that are usable
in file or directory names depend on the operating system. To check what
rclone will replace by default on your system, run
rclone help flags local-encoding.

On non Windows platforms the following characters are replaced when
handling file names.

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  /            0x2F        ／

When running on Windows the following characters are replaced. This list
is based on the Windows file naming conventions.

  Character    Value   Replacement
  ----------- ------- -------------
  NUL          0x00         ␀
  SOH          0x01         ␁
  STX          0x02         ␂
  ETX          0x03         ␃
  EOT          0x04         ␄
  ENQ          0x05         ␅
  ACK          0x06         ␆
  BEL          0x07         ␇
  BS           0x08         ␈
  HT           0x09         ␉
  LF           0x0A         ␊
  VT           0x0B         ␋
  FF           0x0C         ␌
  CR           0x0D         ␍
  SO           0x0E         ␎
  SI           0x0F         ␏
  DLE          0x10         ␐
  DC1          0x11         ␑
  DC2          0x12         ␒
  DC3          0x13         ␓
  DC4          0x14         ␔
  NAK          0x15         ␕
  SYN          0x16         ␖
  ETB          0x17         ␗
  CAN          0x18         ␘
  EM           0x19         ␙
  SUB          0x1A         ␚
  ESC          0x1B         ␛
  FS           0x1C         ␜
  GS           0x1D         ␝
  RS           0x1E         ␞
  US           0x1F         ␟
  /            0x2F        ／
  "            0x22        ＂
  *            0x2A        ＊
  :            0x3A        ：
  <            0x3C        ＜
  >            0x3E        ＞
  ?            0x3F        ？
  \            0x5C        ＼
  |            0x7C        ｜

File names on Windows can also not end with the following characters.
These only get replaced if they are the last character in the name:

  Character    Value   Replacement
  ----------- ------- -------------
  SP           0x20         ␠
  .            0x2E        ．

Invalid UTF-8 bytes will also be replaced, as they can't be converted to
UTF-16.

Paths on Windows

On Windows there are many ways of specifying a path to a file system
resource. Local paths can be absolute, like C:\path\to\wherever, or
relative, like ..\wherever. Network paths in UNC format, \\server\share,
are also supported. Path separator can be either \ (as in
C:\path\to\wherever) or / (as in C:/path/to/wherever). Length of these
paths are limited to 259 characters for files and 247 characters for
directories, but there is an alternative extended-length path format
increasing the limit to (approximately) 32,767 characters. This format
requires absolute paths and the use of prefix \\?\, e.g.
\\?\D:\some\very\long\path. For convenience rclone will automatically
convert regular paths into the corresponding extended-length paths, so
in most cases you do not have to worry about this (read more below).
Using the same prefix \\?\ it is also possible to specify path to
volumes identified by their GUID, e.g.
\\?\Volume{b75e2c83-0000-0000-0000-602f00000000}\some\path.

Long paths

Rclone handles long paths automatically, by converting all paths to
extended-length path format, which allows paths up to 32,767 characters.

This conversion will ensure paths are absolute and prefix them with the
\\?\. This is why you will see that your paths, for instance .\files is
shown as path \\?\C:\files in the output, and \\server\share as
\\?\UNC\server\share.

However, in rare cases this may cause problems with buggy file system
drivers like EncFS. To disable UNC conversion globally, add this to your
.rclone.conf file:

    [local]
    nounc = true

If you want to selectively disable UNC, you can add it to a separate
entry like this:

    [nounc]
    type = local
    nounc = true

And use rclone like this:

rclone copy c:\src nounc:z:\dst

This will use UNC paths on c:\src but not on z:\dst. Of course this will
cause problems if the absolute path length of a file exceeds 259
characters on z, so only use this option if you have to.

Symlinks / Junction points

Normally rclone will ignore symlinks or junction points (which behave
like symlinks under Windows).

If you supply --copy-links or -L then rclone will follow the symlink and
copy the pointed to file or directory. Note that this flag is
incompatible with --links / -l.

This flag applies to all commands.

For example, supposing you have a directory structure like this

    $ tree /tmp/a
    /tmp/a
    ├── b -> ../b
    ├── expected -> ../expected
    ├── one
    └── two
        └── three

Then you can see the difference with and without the flag like this

    $ rclone ls /tmp/a
            6 one
            6 two/three

and

    $ rclone -L ls /tmp/a
         4174 expected
            6 one
            6 two/three
            6 b/two
            6 b/one

--local-links, --links, -l

Normally rclone will ignore symlinks or junction points (which behave
like symlinks under Windows).

If you supply this flag then rclone will copy symbolic links from the
local storage, and store them as text files, with a .rclonelink suffix
in the remote storage.

The text file will contain the target of the symbolic link (see
example).

This flag applies to all commands.

For example, supposing you have a directory structure like this

    $ tree /tmp/a
    /tmp/a
    ├── file1 -> ./file4
    └── file2 -> /home/user/file3

Copying the entire directory with '-l'

    rclone copy -l /tmp/a/ remote:/tmp/a/

The remote files are created with a .rclonelink suffix

    $ rclone ls remote:/tmp/a
           5 file1.rclonelink
          14 file2.rclonelink

The remote files will contain the target of the symbolic links

    $ rclone cat remote:/tmp/a/file1.rclonelink
    ./file4

    $ rclone cat remote:/tmp/a/file2.rclonelink
    /home/user/file3

Copying them back with '-l'

    $ rclone copy -l remote:/tmp/a/ /tmp/b/

    $ tree /tmp/b
    /tmp/b
    ├── file1 -> ./file4
    └── file2 -> /home/user/file3

However, if copied back without '-l'

    $ rclone copyto remote:/tmp/a/ /tmp/b/

    $ tree /tmp/b
    /tmp/b
    ├── file1.rclonelink
    └── file2.rclonelink

If you want to copy a single file with -l then you must use the
.rclonelink suffix.

    $ rclone copy -l remote:/tmp/a/file1.rclonelink /tmp/c

    $ tree /tmp/c
    /tmp/c
    └── file1 -> ./file4

Note that --local-links just enables this feature for the local backend.
--links and -l enable the feature for all supported backends and the
VFS.

Note that this flag is incompatible with -copy-links / -L.

Restricting filesystems with --one-file-system

Normally rclone will recurse through filesystems as mounted.

However if you set --one-file-system or -x this tells rclone to stay in
the filesystem specified by the root and not to recurse into different
file systems.

For example if you have a directory hierarchy like this

    root
    ├── disk1     - disk1 mounted on the root
    │   └── file3 - stored on disk1
    ├── disk2     - disk2 mounted on the root
    │   └── file4 - stored on disk12
    ├── file1     - stored on the root disk
    └── file2     - stored on the root disk

Using rclone --one-file-system copy root remote: will only copy file1
and file2. E.g.

    $ rclone -q --one-file-system ls root
            0 file1
            0 file2

    $ rclone -q ls root
            0 disk1/file3
            0 disk2/file4
            0 file1
            0 file2

NB Rclone (like most unix tools such as du, rsync and tar) treats a bind
mount to the same device as being on the same filesystem.

NB This flag is only available on Unix based systems. On systems where
it isn't supported (e.g. Windows) it will be ignored.

Advanced options

Here are the Advanced options specific to local (Local Disk).

--local-nounc

Disable UNC (long path names) conversion on Windows.

Properties:

-   Config: nounc
-   Env Var: RCLONE_LOCAL_NOUNC
-   Type: bool
-   Default: false
-   Examples:
    -   "true"
        -   Disables long file names.

--copy-links / -L

Follow symlinks and copy the pointed to item.

Properties:

-   Config: copy_links
-   Env Var: RCLONE_LOCAL_COPY_LINKS
-   Type: bool
-   Default: false

--local-links

Translate symlinks to/from regular files with a '.rclonelink' extension
for the local backend.

Properties:

-   Config: links
-   Env Var: RCLONE_LOCAL_LINKS
-   Type: bool
-   Default: false

--skip-links

Don't warn about skipped symlinks.

This flag disables warning messages on skipped symlinks or junction
points, as you explicitly acknowledge that they should be skipped.

Properties:

-   Config: skip_links
-   Env Var: RCLONE_LOCAL_SKIP_LINKS
-   Type: bool
-   Default: false

--skip-specials

Don't warn about skipped pipes, sockets and device objects.

This flag disables warning messages on skipped pipes, sockets and device
objects, as you explicitly acknowledge that they should be skipped.

Properties:

-   Config: skip_specials
-   Env Var: RCLONE_LOCAL_SKIP_SPECIALS
-   Type: bool
-   Default: false

--local-zero-size-links

Assume the Stat size of links is zero (and read them instead)
(deprecated).

Rclone used to use the Stat size of links as the link size, but this
fails in quite a few places:

-   Windows
-   On some virtual filesystems (such ash LucidLink)
-   Android

So rclone now always reads the link.

Properties:

-   Config: zero_size_links
-   Env Var: RCLONE_LOCAL_ZERO_SIZE_LINKS
-   Type: bool
-   Default: false

--local-unicode-normalization

Apply unicode NFC normalization to paths and filenames.

This flag can be used to normalize file names into unicode NFC form that
are read from the local filesystem.

Rclone does not normally touch the encoding of file names it reads from
the file system.

This can be useful when using macOS as it normally provides decomposed
(NFD) unicode which in some language (eg Korean) doesn't display
properly on some OSes.

Note that rclone compares filenames with unicode normalization in the
sync routine so this flag shouldn't normally be used.

Properties:

-   Config: unicode_normalization
-   Env Var: RCLONE_LOCAL_UNICODE_NORMALIZATION
-   Type: bool
-   Default: false

--local-no-check-updated

Don't check to see if the files change during upload.

Normally rclone checks the size and modification time of files as they
are being uploaded and aborts with a message which starts "can't copy -
source file is being updated" if the file changes during upload.

However on some file systems this modification time check may fail (e.g.
Glusterfs #2206) so this check can be disabled with this flag.

If this flag is set, rclone will use its best efforts to transfer a file
which is being updated. If the file is only having things appended to it
(e.g. a log) then rclone will transfer the log file with the size it had
the first time rclone saw it.

If the file is being modified throughout (not just appended to) then the
transfer may fail with a hash check failure.

In detail, once the file has had stat() called on it for the first time
we:

-   Only transfer the size that stat gave
-   Only checksum the size that stat gave
-   Don't update the stat info for the file

NB do not use this flag on a Windows Volume Shadow (VSS). For some
unknown reason, files in a VSS sometimes show different sizes from the
directory listing (where the initial stat value comes from on Windows)
and when stat is called on them directly. Other copy tools always use
the direct stat value and setting this flag will disable that.

Properties:

-   Config: no_check_updated
-   Env Var: RCLONE_LOCAL_NO_CHECK_UPDATED
-   Type: bool
-   Default: false

--one-file-system / -x

Don't cross filesystem boundaries (unix/macOS only).

Properties:

-   Config: one_file_system
-   Env Var: RCLONE_LOCAL_ONE_FILE_SYSTEM
-   Type: bool
-   Default: false

--local-case-sensitive

Force the filesystem to report itself as case sensitive.

Normally the local backend declares itself as case insensitive on
Windows/macOS and case sensitive for everything else. Use this flag to
override the default choice.

Properties:

-   Config: case_sensitive
-   Env Var: RCLONE_LOCAL_CASE_SENSITIVE
-   Type: bool
-   Default: false

--local-case-insensitive

Force the filesystem to report itself as case insensitive.

Normally the local backend declares itself as case insensitive on
Windows/macOS and case sensitive for everything else. Use this flag to
override the default choice.

Properties:

-   Config: case_insensitive
-   Env Var: RCLONE_LOCAL_CASE_INSENSITIVE
-   Type: bool
-   Default: false

--local-no-clone

Disable reflink cloning for server-side copies.

Normally, for local-to-local transfers, rclone will "clone" the file
when possible, and fall back to "copying" only when cloning is not
supported.

Cloning creates a shallow copy (or "reflink") which initially shares
blocks with the original file. Unlike a "hardlink", the two files are
independent and neither will affect the other if subsequently modified.

Cloning is usually preferable to copying, as it is much faster and is
deduplicated by default (i.e. having two identical files does not
consume more storage than having just one.) However, for use cases where
data redundancy is preferable, --local-no-clone can be used to disable
cloning and force "deep" copies.

Currently, cloning is only supported when using APFS on macOS (support
for other platforms may be added in the future.)

Properties:

-   Config: no_clone
-   Env Var: RCLONE_LOCAL_NO_CLONE
-   Type: bool
-   Default: false

--local-no-preallocate

Disable preallocation of disk space for transferred files.

Preallocation of disk space helps prevent filesystem fragmentation.
However, some virtual filesystem layers (such as Google Drive File
Stream) may incorrectly set the actual file size equal to the
preallocated space, causing checksum and file size checks to fail. Use
this flag to disable preallocation.

Properties:

-   Config: no_preallocate
-   Env Var: RCLONE_LOCAL_NO_PREALLOCATE
-   Type: bool
-   Default: false

--local-no-sparse

Disable sparse files for multi-thread downloads.

On Windows platforms rclone will make sparse files when doing
multi-thread downloads. This avoids long pauses on large files where the
OS zeros the file. However sparse files may be undesirable as they cause
disk fragmentation and can be slow to work with.

Properties:

-   Config: no_sparse
-   Env Var: RCLONE_LOCAL_NO_SPARSE
-   Type: bool
-   Default: false

--local-no-set-modtime

Disable setting modtime.

Normally rclone updates modification time of files after they are done
uploading. This can cause permissions issues on Linux platforms when the
user rclone is running as does not own the file uploaded, such as when
copying to a CIFS mount owned by another user. If this option is
enabled, rclone will no longer update the modtime after copying a file.

Properties:

-   Config: no_set_modtime
-   Env Var: RCLONE_LOCAL_NO_SET_MODTIME
-   Type: bool
-   Default: false

--local-time-type

Set what kind of time is returned.

Normally rclone does all operations on the mtime or Modification time.

If you set this flag then rclone will return the Modified time as
whatever you set here. So if you use "rclone lsl --local-time-type
ctime" then you will see ctimes in the listing.

If the OS doesn't support returning the time_type specified then rclone
will silently replace it with the modification time which all OSes
support.

-   mtime is supported by all OSes
-   atime is supported on all OSes except: plan9, js
-   btime is only supported on: Windows, macOS, freebsd, netbsd
-   ctime is supported on all Oses except: Windows, plan9, js

Note that setting the time will still set the modified time so this is
only useful for reading.

Properties:

-   Config: time_type
-   Env Var: RCLONE_LOCAL_TIME_TYPE
-   Type: mtime|atime|btime|ctime
-   Default: mtime
-   Examples:
    -   "mtime"
        -   The last modification time.
    -   "atime"
        -   The last access time.
    -   "btime"
        -   The creation time.
    -   "ctime"
        -   The last status change time.

--local-hashes

Comma separated list of supported checksum types.

Properties:

-   Config: hashes
-   Env Var: RCLONE_LOCAL_HASHES
-   Type: CommaSepList
-   Default:

--local-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

-   Config: encoding
-   Env Var: RCLONE_LOCAL_ENCODING
-   Type: Encoding
-   Default: Slash,Dot

--local-description

Description of the remote.

Properties:

-   Config: description
-   Env Var: RCLONE_LOCAL_DESCRIPTION
-   Type: string
-   Required: false

Metadata

Depending on which OS is in use the local backend may return only some
of the system metadata. Setting system metadata is supported on all OSes
but setting user metadata is only supported on linux, freebsd, netbsd,
macOS and Solaris. It is not supported on Windows yet (see
pkg/attrs#47).

User metadata is stored as extended attributes (which may not be
supported by all file systems) under the "user.*" prefix.

Metadata is supported on files and directories.

Here are the possible system metadata items for the local backend.

  ---------------------------------------------------------------------------------------------------
  Name        Help           Type          Example                               Read Only
  ----------- -------------- ------------- ------------------------------------- --------------------
  atime       Time of last   RFC 3339      2006-01-02T15:04:05.999999999Z07:00   N
              access                                                             

  btime       Time of file   RFC 3339      2006-01-02T15:04:05.999999999Z07:00   N
              birth                                                              
              (creation)                                                         

  gid         Group ID of    decimal       500                                   N
              owner          number                                              

  mode        File type and  octal, unix   0100664                               N
              mode           style                                               

  mtime       Time of last   RFC 3339      2006-01-02T15:04:05.999999999Z07:00   N
              modification                                                       

  rdev        Device ID (if  hexadecimal   1abc                                  N
              special file)                                                      

  uid         User ID of     decimal       500                                   N
              owner          number                                              
  ---------------------------------------------------------------------------------------------------

See the metadata docs for more info.

Backend commands

Here are the commands specific to the local backend.

Run them with:

    rclone backend COMMAND remote:

The help below will explain what arguments each command takes.

See the backend command for more info on how to pass options and
arguments.

These can be run on a running backend using the rc command
backend/command.

noop

A null operation for testing backend commands.

    rclone backend noop remote: [options] [<arguments>+]

This is a test command which has some options you can try to change the
output.

Options:

-   "echo": Echo the input arguments.
-   "error": Return an error based on option value.

Changelog

v1.74.3 - 2026-06-05

See commits

-   Bug Fixes
    -   rc
        -   Fix unauthenticated command execution via --rc-serve inline
            remotes CVE-2026-49980 (Nick Craig-Wood)
        -   Stop global.* connection string options changing config
            CVE-2026-49980 (Nick Craig-Wood)
    -   build: Fix multiple CVEs by upgrading to go1.26.4 (Nick
        Craig-Wood)
        -   CVE-2026-42504: mime: quadratic complexity in
            WordDecoder.DecodeHeader
        -   CVE-2026-42507: net/textproto: arbitrary input are included
            in errors without any escaping
        -   CVE-2026-27145: crypto/x509: split candidate hostname only
            once
    -   log: Fix wrong source file:line in JSON logs from release builds
        (Nick Craig-Wood)
    -   mount2: Fix empty directory listings on re-read (Janne Beate
        Bakeng)
    -   serve s3: Fix multipart ListParts pagination returning wrong
        part numbers (Nick Craig-Wood)
    -   serve sftp
        -   Fix file corruption when a client resumes an upload (Nick
            Craig-Wood)
        -   Fix truncate request being silently ignored (Nick
            Craig-Wood)
-   Local
    -   Fix getXattr returning empty map instead of nil (Leon Brocard)
-   Drime
    -   Fix server-side copy and move failing with Cloudflare 520 error
        (Nick Craig-Wood)
    -   Fix files being uploaded to the wrong directory (Nick
        Craig-Wood)
    -   Remove duplicate upload_cutoff config option (Nick Craig-Wood)
    -   Fix directory rename leaving the renamed folder empty in VFS
        (Nick Craig-Wood)
-   Drive
    -   Fix server-side move failing on shared drives with duplicate
        dirs (Nick Craig-Wood)
-   Iclouddrive
    -   Fix ADP/PCS cookie acquisition for iCloud Drive (Yakov Till)
    -   Fix "Index has invalid data" error listing iCloud Photos (Nick
        Craig-Wood)

v1.74.2 - 2026-05-22

See commits

-   Bug Fixes
    -   build
        -   Update golang.org/x/net to v0.55.0 to address:
            -   CVE-2026-42506: html: incorrect handling of namespaced
                elements in foreign content
            -   CVE-2026-39821: idna: failure to reject ASCII-only
                Punycode-encoded labels
            -   CVE-2026-42502: html: incorrect handling of HTML
                elements in foreign content
            -   CVE-2026-25680: html: denial of service when parsing
                arbitrary HTML
            -   CVE-2026-25681: html: incorrect handling of character
                references in DOCTYPE nodes
            -   CVE-2026-27136: html: duplicate attributes can cause XSS
        -   Update golang.org/x/crypto to v0.52.0 to address:
            -   CVE-2026-46598: ssh/agent: pathological inputs can lead
                to client panic
            -   CVE-2026-46597: ssh: byte arithmetic causes underflow
                and panic
            -   CVE-2026-39828: ssh: bypass of certificate restrictions
            -   CVE-2026-39835: ssh: server panic during
                CheckHostKey/Authenticate
            -   CVE-2026-39833: ssh/agent: key constraints not enforced
            -   CVE-2026-39832: ssh/agent: agent constraints dropped
                when forwarding keys
            -   CVE-2026-39827: ssh: memory leak when rejecting channels
                can lead to DoS
            -   CVE-2026-39830: ssh: client can cause server deadlock on
                unexpected responses
            -   CVE-2026-39829: ssh: pathological RSA/DSA parameters may
                cause DoS
            -   CVE-2026-39831: ssh: bypass of FIDO/U2F security keys
                physical interaction
            -   CVE-2026-39834: ssh: infinite loop on large channel
                writes
            -   CVE-2026-42508: ssh/knownhosts: auth bypass via
                unenforced @revoked status
            -   CVE-2026-46595: ssh: VerifiedPublicKeyCallback
                permissions skip enforcement
        -   Update golang.org/x/image to v0.41.0 to address:
            -   CVE-2026-42500: bmp: panic when reading out of bound
                palette index
            -   CVE-2026-33809: tiff: excessive resource consumption in
                PackBits decompression
        -   Update golang.org/x/sys to version v0.45.0 to address:
            -   CVE-2026-39824: windows: integer overflow in
                NewNTUnicodeString
        -   Update github.com/go-git/go-billy/v5 to 5.9.0 to fix
            CVE-2026-44740
        -   bisync: Fix --conflict-loser pathname with
            --conflict-resolve newer (nielash)
        -   gui: Update embedded release to 1.1.8 (Nick Craig-Wood)
        -   lib/http: Replace deprecated h2c.NewHandler with
            http.Server.Protocols (Nick Craig-Wood)
        -   rc: Remove duplicate metrics_addr option registration (Nick
            Craig-Wood)
        -   vfs/vfscache: Fix silent write failure when mounting with
            remote:. (Lucky945H)
    -   doc fixes (FTCHD, Iizuki, Leon Brocard, Nick Craig-Wood)
-   Drime
    -   Fix file doesn't exists error when trying to delete (John Volk)
    -   Fix 500 errors when listing shared folders (Alvinwylim)
-   Jottacloud
    -   Support whitelabel service Phonero Sky (Tore Anderson)
-   Protondrive
    -   Fix corrupted on transfer: sha1 hashes differ (William Tange)
-   S3
    -   Add new MEGA S4 endpoints on megas4.com including Asia-Pacific
        region (Nick Craig-Wood)
-   WebDAV
    -   Honour auth_redirect on listAll PROPFIND (Sai Asish Y)

v1.74.1 - 2026-05-08

See commits

-   Bug Fixes
    -   bisync: Fix retryable without --resync error message when
        --resync has a critical failure (Gustavo V. F.)
    -   build
        -   Fix multiple CVEs by upgrading to go1.26.3 (Nick Craig-Wood)
            -   CVE-2026-42501: cmd/go: malicious module proxy can
                bypass checksum database
            -   CVE-2026-39825: net/http/httputil: ReverseProxy forwards
                queries with more than urlmaxqueryparams parameters
            -   CVE-2026-39836: net: panic in Dial and LookupPort when
                handling NUL byte on Windows
            -   CVE-2026-42499: net/mail: quadratic string concatenation
                in consumePhrase
            -   CVE-2026-39820: net/mail: quadratic string
                concatentation in consumeComment
            -   CVE-2026-39819: cmd/go: "go bug" follows symlinks in
                predictable temporary filenames
            -   CVE-2026-39817: cmd/go: "go tool pack" does not sanitize
                output paths
            -   CVE-2026-33814: net/http: infinite loop in HTTP/2
                transport when given bad SETTINGS_MAX_FRAME_SIZE
            -   CVE-2026-39826: html/template: escaper bypass leads to
                XSS
            -   CVE-2026-33811: net: crash when handling long CNAME
                response
            -   CVE-2026-39823: html/template: bypass of meta content
                URL escaping causes XSS
        -   Update golang.org/x/net to v0.53.0 to fix CVE-2026-33814
            (Nick Craig-Wood)
    -   cmd/serve/s3: Return object listings in key order (Leon Brocard)
-   Cloudinary
    -   Fix retrying every error and fix pacer sleep units (Nick
        Craig-Wood)
-   Drime
    -   Fix large file uploads landing in drive root instead of
        configured folder (Nick Craig-Wood)
    -   Fix uploads of 100..200M files (Nick Craig-Wood)
-   Protondrive
    -   Route HTTP through rclone's transport (Nick Craig-Wood)
    -   Route library logging through rclone's logger (Nick Craig-Wood)
    -   Fix segfault when copying files missing revision metadata (Nick
        Craig-Wood)
-   S3
    -   Fix STS call per request by caching AssumeRole credentials (Nick
        Craig-Wood)
    -   Add new Fastly Object Storage regions (Leon Brocard)

v1.74.0 - 2026-05-01

See commits

-   New backends
    -   Huawei Drive (王一赫)
    -   iCloud Photos (read only) (Yakov Till)
    -   New S3 providers
        -   Fastly Object Storage (Leon Brocard)
        -   HCP (Chris)
        -   Impossible Cloud (Nick Craig-Wood)
        -   UCloud US3 (jinkeyuu)
        -   Zadara (Shlomi Avihou)
-   New commands
    -   gui: launch new embedded web based GUI for basic rclone
        operations (FTCHD, Nick Craig-Wood)
-   New Features
    -   build
        -   Update golang.org/x/image/webp to v0.39.0 to fix
            CVE-2026-33813 (Nick Craig-Wood)
        -   Bump github.com/Azure/go-ntlmssp to 0.1.1 to fix
            CVE-2026-32952 (dependabot[bot])
        -   Update to go1.26 and make go1.25 the minimum required
            version (Nick Craig-Wood)
        -   Update all dependencies (Nick Craig-Wood)
        -   Modernize Go code with go fix for go1.25 (Nick Craig-Wood)
        -   Fix loong64 and s390x build (Suyun)
    -   docs
        -   Modernize rclone.org site design (Nick Craig-Wood)
        -   fixes (albertony, Enduriel, Jason, Luke Cyca,
            mathieulongtin, Nick Craig-Wood, SyoBoN)
    -   fshttp: Add --dump curl for dumping HTTP requests as curl
        commands (Nick Craig-Wood)
    -   graphics: Optimise images losslessly with ImageOptim (Leon
        Brocard)
    -   listremotes: Add --exact flag for filtering (Anton Bordwine)
    -   rc
        -   Flip auth default so all endpoints require auth unless opted
            out (Nick Craig-Wood)
        -   Add core/disks to enumerate attached disks (Nick Craig-Wood)
        -   Add deletedDirs stat to core/stats help output (Billy
            Hughes)
    -   serve http
        -   Add fallback embedded favicon (Leon Brocard)
        -   Add gzip compression for text responses (Leon Brocard)
        -   Dark mode for file browser (FTCHD)
        -   Add HTTP/2 cleartext support for all http servers (TheBabu)
    -   touch: Add metadata when using --metadata-set (Prakhar
        Chhalotre)
-   Bug Fixes
    -   accounting
        -   Update String method output format for clarity in transfer
            rate representation (Prakhar Chhalotre)
        -   Fix rcat/copyurl for files.com (Nick Craig-Wood)
    -   bisync
        -   Add missing rc params (nielash)
        -   Add more structured info to rc output (nielash)
        -   Auto-generate rc help docs (nielash)
        -   Fix handling of unreadable lockfiles (lif)
        -   Fix flaky TestBisyncConcurrent by increasing random name
            entropy (Nick Craig-Wood)
        -   Fix integration tests after sftp log changes (Nick
            Craig-Wood)
    -   copyurl: Fix ignored --upload-headers and --download-headers
        (Andriy Senyshyn)
    -   librclone/ctest: Add Windows support and fix memory management
        (BizaNator)
    -   log: Fix data race on OutputHandler.format field (Nick
        Craig-Wood)
    -   operations
        -   Multithread copy: grab memory before making go routines
            (Nick Craig-Wood)
    -   serve dlna: Fix Samsung TV compatibility (Nick Craig-Wood)
    -   serve nfs: Fix EOF flag in READ response not being set when read
        reaches end of file (Nick Craig-Wood)
-   Mount
    -   rc: fix mounts created with mountPoint "*" overwriting each
        other (Nick Craig-Wood)
-   VFS
    -   Fix slow nfs serve by adding --vfs-handle-caching (Nick
        Craig-Wood)
    -   Add context parameter to New() for config propagation (Nick
        Craig-Wood)
    -   Replace context.TODO/Background with stored VFS context (Nick
        Craig-Wood)
-   Local
    -   Remove fadvise calls that cause spinlock contention (Patrick
        Farrell)
-   Azure Blob
    -   Add --azureblob-copy-total-concurrency to limit total multipart
        copy concurrency (Duncan F)
    -   Add server side copy real time accounting (Nick Craig-Wood)
    -   Add --azureblob-decompress flag to download gzip-encoded files
        (Nick Craig-Wood)
-   Azurefiles
    -   Fix missing x-ms-file-request-intent header with OAuth (Nick
        Craig-Wood)
-   B2
    -   Add server side copy real time accounting (Nick Craig-Wood)
-   Drime
    -   Implement About (Cohinem)
    -   Fix listings of large directories (John Volk)
-   Drive
    -   Add integration test for handling folder names with single
        quotes (Prakhar Chhalotre)
-   Filelu
    -   Add multipart init response type (kingston125)
    -   Migrate API calls to lib/rest (kingston125)
-   Filen
    -   Make multi-threaded upload chunks individually retryable
        (Enduriel)
-   Iclouddrive
    -   Replace plaintext signin with SRP authentication (Mike GIllan)
    -   Use dynamic origin for SRP auth headers (Xiangzhe)
    -   Lowercase Apple ID for SRP authentication (Mike GIllan)
    -   Add read only iCloud Photos support and SRP authentication
        (Yakov Till)
-   Internxt
    -   Implement multi-part uploads (José Zúniga)
-   Jottacloud
    -   Add encoding of percent character to default backend encoding
        (albertony)
-   Linkbox
    -   Fix downloading files by using web API (Nick Craig-Wood)
-   Mega
    -   Fix crash when logging in with previous auth keys fails (Andrew
        Gunnerson)
-   Pcloud
    -   Fix recursive listing from the root (Nick Craig-Wood)
-   Pikpak
    -   Support custom filenames for addurl backend command (wiserain)
-   Protondrive
    -   Align backend with newer Proton SDK stack (tdawe)
    -   Update to latest go-proton-api to use new host (dlaumen)
    -   Fix server-side moveto and DirMove against current API (Nick
        Craig-Wood)
-   S3
    -   Add Fastly Object Storage provider (Leon Brocard)
    -   Add HCP provider and list_versions_oldest_first quirk (Chris)
    -   Add Impossible Cloud as a new S3 provider (Nick Craig-Wood)
    -   Add UCloud Object Storage provider (#9230) (jinkeyuu)
    -   Add Zadara Object Storage provider (Shlomi Avihou)
    -   Remove StackPath Object Storage provider (Leon Brocard)
    -   Add server side copy real time accounting (Nick Craig-Wood)
    -   Add OVHcloud storage classes (Bjoern Franke)
    -   Add Object Lock support (Chris)
    -   Add new Fastly Object Storage regions (Leon Brocard)
    -   Scaleway: ONEZONE_IA is available in all zones, GLACIER only in
        FR-PAR (Bjoern Franke)
    -   Ionos: updated regions & endpoints (hxnd)
    -   IBM COS: provide ibm_iam_endpoint as a configurable param for
        IBM IAM-based auth (Bhagyashreek8)
    -   Fix Content-MD5 for Object Lock uploads and add GCS quirk
        (Chris)
    -   Fix regression where PutObject fails with non-seekable readers
        (Chris)
    -   Fix --s3-versions flag ignored by cleanup-hidden when
        GetBucketVersioning fails (Chris)
    -   Fix bucket creation failing on Ceph/radosgw (Jan Heylen)
-   SFTP
    -   Warn the user if no host key validation is configured (Nick
        Craig-Wood)
-   WebDAV
    -   Permit redirects on PROPFIND for metadata (Brian Bockelman)
    -   Request only required properties in listAll to improve
        performance (ZRHan)
    -   Optimize performance by using Depth=0 for metadata requests
        (ZRHan)

v1.73.5 - 2026-04-19

See commits

-   Bug Fixes
    -   operations: Add AuthRequired to operations/fsinfo to prevent
        backend creation CVE-2026-41179 (Nick Craig-Wood)
    -   rc
        -   Add AuthRequired to options/set to prevent auth bypass
            CVE-2026-41176 (Nick Craig-Wood)
        -   Snapshot NoAuth at startup to prevent runtime auth bypass
            CVE-2026-41176 (Nick Craig-Wood)
    -   filter: Fix debug logs that fire before logger is configured
        (Nick Craig-Wood)
-   Azureblob
    -   Add Microsoft Partner Network User-Agent prefix (Nick
        Craig-Wood)
-   Drime
    -   Fix User.EntryPermissions JSON unmarshalling (a1pcm)
-   Iclouddrive
    -   Fix 'directory not found' error when the directory contains
        accent marks (Brais Couce)
-   S3
    -   Fix TencentCOS CDN endpoint failing on bucket check (Mozi)
    -   Fix empty delimiter parameter rejected by Archiware P5 server
        (Nick Craig-Wood)

v1.73.4 - 2026-04-08

See commits

-   Bug Fixes
    -   build
        -   Update to go 1.25.9 to fix multiple CVEs (Nick Craig-Wood)
            -   CVE-2026-32282: os: Root.Chmod can follow symlinks out
                of the root on Linux
            -   CVE-2026-32289: html/template: JS template literal
                context incorrectly tracked
            -   CVE-2026-33810: crypto/x509: excluded DNS constraints
                not properly applied to wildcard domains
            -   CVE-2026-27144: cmd/compile: no-op interface conversion
                bypasses overlap checking
            -   CVE-2026-27143: cmd/compile: possible memory corruption
                after bound check elimination
            -   CVE-2026-32288: archive/tar: unbounded allocation when
                parsing old format GNU sparse map
            -   CVE-2026-32283: crypto/tls: multiple key update
                handshake messages can cause connection to deadlock
            -   CVE-2026-27140: cmd/go: trust layer bypass when using
                cgo and SWIG
            -   CVE-2026-32280: crypto/x509: unexpected work during
                chain building
            -   CVE-2026-32281: crypto/x509: inefficient policy
                validation
        -   Fix Denial of Service due to Panic in AWS SDK for Go v2 SDK
            EventStream Decoder (dependabot[bot])
        -   Update golang.org/x/image to 0.38.0 to fix CVE-2026-33809
            (dependabot[bot])
    -   docs
        -   Fix header level for metadata option (Clément Notin)
        -   Fix markdown issues in mount docs (albertony)
        -   Fix link to not be language specific (Ross Smith II)
        -   Note macOS 10.15 (Catalina) support with version v1.70.3
            (kapitainsky)
-   Filen
    -   Update SDK version (Enduriel)

v1.73.3 - 2026-03-23

See commits

-   Bug Fixes
    -   build
        -   Update to google.golang.org/grpc 1.79.3 to fix
            CVE-2026-33186 (dependabot[bot])
        -   Update to github.com/buger/jsonparser 1.1.2 to fix
            GHSA-6g7g-w4f8-9c9x (dependabot[bot])
    -   doc fixes
        -   Added text to the label showing version-introduced info
            (Jan-Philipp Reßler)
        -   Clarify Filen password change requires updating both
            password and API key in rclone config (Jason)
        -   s3: clarify multi tenant support for Cubbit (Marco Ferretti)
        -   jottacloud: Fix broken link (albertony)
    -   lib/rest: Fix URLPathEscapeAll breaking WebDAV servers (eg
        nzbdav) with strict path matching (Andrew Furman)
    -   list: Fix nil pointer panic in Sorter when temp file creation
        fails (Nick Craig-Wood)

v1.73.2 - 2026-03-06

See commits

-   Bug Fixes
    -   build
        -   Update to go 1.25.8 to fix CVE-2026-27137 CVE-2026-27138
            CVE-2026-25679 CVE-2026-27142 (Nick Craig-Wood)
        -   Update github.com/cloudflare/circl to v1.6.3 to fix
            CVE-2026-1229 (Nick Craig-Wood)
        -   Update to golang.org/x/net v0.51.0 to fix CVE-2026-27141
            (Nick Craig-Wood)
    -   docs fixes:
        -   bisync: Add group Sync to the bisync command (Jan-Philipp
            Reßler)
        -   Note that --use-server-modtime only works on some backends
            (Nick Craig-Wood)
        -   Document unsupported S3 object keys with double slashes
            (Adam Kasztenny)
        -   Fix headers hierarchy for mount.md (Dark Dragon)
        -   Fix new drive flag typo in changelog (razorloves)
-   Archive
    -   Extract: fix extraction with "./" prefix from tar entry paths
        (Varun Chawla)
-   Drime
    -   Fix chunk-uploaded files ignoring workspace ID (a1pcm)
-   Internxt
    -   Fix Entry doesn't belong in directory errors on windows
        (jzunigax2)
-   WebDAV
    -   Escape reserved characters in URL path segments (Varun Chawla)
    -   Add missing headers for CORS (Romāns Potašovs)

v1.73.1 - 2026-02-17

See commits

-   Bug Fixes
    -   accounting: Fix missing server side stats from core/stats rc
        (Nick Craig-Wood)
    -   build
        -   Fix CVE-2025-68121 by updating go to 1.25.7 or later (Nick
            Craig-Wood)
        -   Bump github.com/go-chi/chi/v5 from 5.2.3 to 5.2.5 to fix
            GO-2026-4316 (albertony)
    -   docs: Extend copyurl docs with an example of CSV FILENAMEs
        starting with a path. (Jack Kelly)
    -   march: Fix runtime: program exceeds 10000-thread limit (Nick
        Craig-Wood)
    -   pacer
        -   Fix deadlock between pacer token and --max-connections (Nick
            Craig-Wood)
        -   Re-read the sleep time as it may be stale (Nick Craig-Wood)
-   Drime
    -   Fix files and directories being created in the default workspace
        (Nick Craig-Wood)
-   Filelu
    -   Avoid buffering entire file in memory (kingston125)
    -   Add multipart upload support with configurable cutoff
        (kingston125)
-   Filen
    -   Fix 32 bit targets not being able to list directories (Enduriel)
    -   Fix potential panic in case of error during upload (Enduriel)
-   Internxt
    -   Implement re-login under refresh logic, improve retry logic
        (José Zúniga) -S3
    -   Set list_version to 2 for FileLu S3 configuration (kingston125)

v1.73.0 - 2026-01-30

See commits

-   New backends
    -   Shade (jhasse-shade)
    -   Drime (dougal)
    -   Filen (Enduriel)
    -   Internxt (jzunigax2)
    -   New S3 providers
        -   Bizfly Cloud Simple Storage (vupn0712)
-   New Features
    -   docs: Add Support Tiers to the documentation (Nick Craig-Wood)
    -   rc: Add operations/hashsumfile to sum a single file only (Nick
        Craig-Wood)
    -   serve webdav: Implement download directory as Zip (Leo)
-   Bug Fixes
    -   fs: fix bwlimit: correct reporting (Mikel Olasagasti Uranga)
    -   log: fix systemd adding extra newline (dougal)
    -   docs: fixes (albertony, darkdragon-001, Duncan Smart, hyusap,
        Marc-Philip, Nick Craig-Wood, vicerace, vyv03354,
        yuval-cloudinary, yy)
    -   serve s3: Make errors in --s3-auth-key fatal (Nick Craig-Wood)
-   Mount
    -   Fix OpenBSD mount support. (Nick Owens)
-   Azure Blob
    -   Add metadata and tags support across upload and copy paths
        (Cliff Frey)
    -   Factor the common auth into a library (Nick Craig-Wood)
-   Azurefiles
    -   Factor the common auth into a library (Nick Craig-Wood)
-   B2
    -   Support authentication with new bucket restricted application
        keys (DianaNites)
-   Drive
    -   Add --drive-metadata-enforce-expansive-access flag (Nick
        Craig-Wood)
    -   Fix crash when trying to creating shortcut to a Google doc (Nick
        Craig-Wood)
-   FTP
    -   Add http proxy authentication support (Nicolas Dessart)
-   Mega
    -   Reverts TLS workaround (necaran)
-   Memory
    -   Add --memory-discard flag for speed testing (Nick Craig-Wood)
-   OneDrive
    -   Fix cancelling multipart upload (Nick Craig-Wood)
    -   Fix setting modification time on directories for OneDrive
        Personal (Nick Craig-Wood)
    -   Fix OneDrive Personal no longer supports description (Nick
        Craig-Wood)
    -   Fix require sign in for OneDrive Personal (Nick Craig-Wood)
    -   Fix permissions on OneDrive Personal (Nick Craig-Wood)
-   Oracle Object Storage
    -   Eliminate unnecessary heap allocation (Qingwei Li)
-   Pcloud
    -   Add support for ChangeNotify to enable real-time updates in
        mount (masrlinu)
-   Protondrive
    -   Update to use forks of upstream modules to unblock development
        (Nick Craig-Wood)
-   S3
    -   Add ability to specify an IAM role for cross-account interaction
        (Vladislav Tropnikov)
    -   Linode: updated endpoints to use ISO 3166-1 alpha-2 standard
        (jbagwell-akamai)
    -   Fix Copy ignoring storage class (vupn0712)
-   SFTP
    -   Add http proxy authentication support (Nicolas Dessart)
    -   Eliminate unnecessary heap allocation (Qingwei Li)

v1.72.1 - 2025-12-10

See commits

-   Bug Fixes
    -   build: update to go1.25.5 to fix CVE-2025-61729
    -   doc fixes (Duncan Smart, Nick Craig-Wood)
    -   configfile: Fix piped config support (Jonas Tingeborn)
    -   log
        -   Fix PID not included in JSON log output (Tingsong Xu)
        -   Fix backtrace not going to the --log-file (Nick Craig-Wood)
-   Google Cloud Storage
    -   Improve endpoint parameter docs (Johannes Rothe)
-   S3
    -   Add missing regions for Selectel provider (Nick Craig-Wood)

v1.72.0 - 2025-11-21

See commits

-   New backends
    -   Archive backend to read archives on cloud storage. (Nick
        Craig-Wood)
-   New S3 providers
    -   Cubbit Object Storage (Marco Ferretti)
    -   FileLu S5 Object Storage (kingston125)
    -   Hetzner Object Storage (spiffytech)
    -   Intercolo Object Storage (Robin Rolf)
    -   Rabata S3-compatible secure cloud storage (dougal)
    -   Servercore Object Storage (dougal)
    -   SpectraLogic (dougal)
-   New commands
    -   rclone archive: command to create and read archive files (Fawzib
        Rojas)
    -   rclone config string: for making connection strings (Nick
        Craig-Wood)
    -   rclone test speed: Add command to test a specified remotes speed
        (dougal)
-   New Features
    -   backends: many backends have has a paged listing (ListP)
        interface added
        -   this enables progress when listing large directories and
            reduced memory usage
    -   build
        -   Bump golang.org/x/crypto from 0.43.0 to 0.45.0 to fix
            CVE-2025-58181 (dependabot[bot])
        -   Modernize code and tests (Nick Craig-Wood, russcoss,
            juejinyuxitu, reddaisyy, dulanting, Oleksandr Redko)
        -   Update all dependencies (Nick Craig-Wood)
        -   Enable support for aix/ppc64 (Lakshmi-Surekha)
    -   check: Improved reporting of differences in sizes and contents
        (albertony)
    -   copyurl: Added --url to read URLs from CSV file (S-Pegg1,
        dougal)
    -   docs:
        -   markdown linting (albertony)
        -   fixes (albertony, Andrew Gunnerson, anon-pradip, Claudius
            Ellsel, dougal, iTrooz, Jean-Christophe Cura, Joseph
            Brownlee, kapitainsky, Matt LaPaglia, n4n5, Nick Craig-Wood,
            nielash, SublimePeace, Ted Robertson, vastonus)
    -   fs: remove unnecessary Seek call on log file (Aneesh Agrawal)
    -   hashsum: Improved output format when listing algorithms
        (albertony)
    -   lib/http: Cleanup indentation and other whitespace in http serve
        template (albertony)
    -   lsf: Add support for unix and unixnano time formats (Motte)
    -   oauthutil: Improved debug logs from token refresh (albertony)
    -   rc
        -   Add job/batch for sending batches of rc commands to run
            concurrently (Nick Craig-Wood)
        -   Add runningIds and finishedIds to job/list (n4n5)
        -   Add osVersion, osKernel and osArch to core/version (Nick
            Craig-Wood)
        -   Make sure fatal errors run via the rc don't crash rclone
            (Nick Craig-Wood)
        -   Add executeId to job statuses in job/list (Nikolay Kiryanov)
        -   config/unlock: rename parameter to configPassword accept old
            as well (Nick Craig-Wood)
    -   serve http: Download folders as zip (dougal)
-   Bug Fixes
    -   build
        -   Fix tls: failed to verify certificate: x509: negative serial
            number (Nick Craig-Wood)
    -   march
        -   Fix --no-traverse being very slow (Nick Craig-Wood)
    -   serve s3: Fix log output to remove the EXTRA messages (iTrooz)
-   Mount
    -   Windows: improve error message on missing WinFSP (divinity76)
-   Local
    -   Add --skip-specials to ignore special files (Adam Dinwoodie)
-   Azure Blob
    -   Add ListP interface (dougal)
-   Azurefiles
    -   Add ListP interface (Nick Craig-Wood)
-   B2
    -   Add ListP interface (dougal)
    -   Add Server-Side encryption support (fries1234)
    -   Fix "expected a FileSseMode but found: ''" (dougal)
    -   Allow individual old versions to be deleted with --b2-versions
        (dougal)
-   Box
    -   Add ListP interface (Nick Craig-Wood)
    -   Allow configuration with config file contents (Dominik Sander)
-   Compress
    -   Add zstd compression (Alex)
-   Drive
    -   Add ListP interface (Nick Craig-Wood)
-   Dropbox
    -   Add ListP interface (Nick Craig-Wood)
    -   Fix error moving just created objects (Nick Craig-Wood)
-   FTP
    -   Fix SOCKS proxy support (dougal)
    -   Fix transfers from servers that return 250 ok messages (jijamik)
-   Google Cloud Storage
    -   Add ListP interface (dougal)
    -   Fix --gcs-storage-class to work with server side copy for
        objects (Riaz Arbi)
-   HTTP
    -   Add basic metadata and provide it via serve (Oleg Kunitsyn)
-   Jottacloud
    -   Add support for Let's Go Cloud (from MediaMarkt) as a whitelabel
        service (albertony)
    -   Add support for MediaMarkt Cloud as a whitelabel service
        (albertony)
    -   Added support for traditional oauth authentication also for the
        main service (albertony)
    -   Abort attempts to run unsupported rclone authorize command
        (albertony)
    -   Improved token refresh handling (albertony)
    -   Fix legacy authentication (albertony)
    -   Fix authentication for whitelabel services from Elkjøp
        subsidiaries (albertony)
-   Mega
    -   Implement 2FA login (iTrooz)
-   Memory
    -   Add ListP interface (dougal)
-   Onedrive
    -   Add ListP interface (Nick Craig-Wood)
-   Oracle Object Storage
    -   Add ListP interface (dougal)
-   Pcloud
    -   Add ListP interface (Nick Craig-Wood)
-   Proton Drive
    -   Automated 2FA login with OTP secret key (Microscotch)
-   S3
    -   Make it easier to add new S3 providers (dougal)
    -   Add --s3-use-data-integrity-protections quirk to fix BadDigest
        error in Alibaba, Tencent (hunshcn)
    -   Add support for --upload-header, If-Match and If-None-Match
        (Sean Turner)
    -   Fix single file copying behavior with low permission (hunshcn)
-   SFTP
    -   Fix zombie SSH processes with --sftp-ssh (Copilot)
-   Smb
    -   Optimize smb mount performance by avoiding stat checks during
        initialization (Sudipto Baral)
-   Swift
    -   Add ListP interface (dougal)
    -   If storage_policy isn't set, use the root containers policy
        (Andrew Ruthven)
    -   Report disk usage in segment containers (Andrew Ruthven)
-   Ulozto
    -   Implement the About functionality (Lukas Krejci)
    -   Fix downloads returning HTML error page (aliaj1)
-   WebDAV
    -   Optimize bearer token fetching with singleflight (hunshcn)
    -   Add ListP interface (Nick Craig-Wood)
    -   Use SpaceSepList to parse bearer token command (hunshcn)
    -   Add Access-Control-Max-Age header for CORS preflight caching
        (viocha)
    -   Fix out of memory with sharepoint-ntlm when uploading large file
        (Nick Craig-Wood)

v1.71.2 - 2025-10-20

See commits

-   Bug Fixes
    -   build
        -   update Go to 1.25.3
        -   Update Docker image Alpine version to fix CVE-2025-9230
    -   bisync: Fix race when CaptureOutput is used concurrently (Nick
        Craig-Wood)
    -   doc fixes (albertony, dougal, iTrooz, Matt LaPaglia, Nick
        Craig-Wood)
    -   index: Add missing providers (dougal)
    -   serve http: Fix: logging URL on start (dougal)
-   Azurefiles
    -   Fix server side copy not waiting for completion (Vikas Bhansali)
-   B2
    -   Fix 1TB+ uploads (dougal)
-   Google Cloud Storage
    -   Add region us-east5 (Dulani Woods)
-   Mega
    -   Fix 402 payment required errors (Nick Craig-Wood)
-   Pikpak
    -   Fix unnecessary retries by using URL expire parameter (Youfu
        Zhang)

v1.71.1 - 2025-09-24

See commits

-   Bug Fixes
    -   bisync: Fix error handling for renamed conflicts (nielash)
    -   march: Fix deadlock when using --fast-list on syncs (Nick
        Craig-Wood)
    -   operations: Fix partial name collisions for non --inplace copies
        (Nick Craig-Wood)
    -   pacer: Fix deadlock with --max-connections (Nick Craig-Wood)
    -   doc fixes (albertony, anon-pradip, Claudius Ellsel, dougal,
        Jean-Christophe Cura, Nick Craig-Wood, nielash)
-   Mount
    -   Do not log successful unmount as an error (Tilman Vogel)
-   VFS
    -   Fix SIGHUP killing serve instead of flushing directory caches
        (dougal)
-   Local
    -   Fix rmdir "Access is denied" on windows (nielash)
-   Box
    -   Fix about after change in API return (Nick Craig-Wood)
-   Combine
    -   Propagate SlowHash feature (skbeh)
-   Drive
    -   Update making your own client ID instructions (Ed Craig-Wood)
-   Internet Archive
    -   Fix server side copy files with spaces (Nick Craig-Wood)

v1.71.0 - 2025-08-22

See commits

-   New S3 providers
    -   Exaba (Nick Craig-Wood)
        -   We've been working with Exaba and they would love early
            adopters, self-hosters and testers
    -   OVHcloud Object Storage (Florent Vennetier)
    -   Zata ($@M@RTH_)
-   New Features
    -   Allow global config to be overridden or set on backend creation
        (Nick Craig-Wood)
    -   bisync: Promoted from beta to stable (nielash)
    -   build
        -   Update to go1.25 and make go1.24 the minimum required
            version (Nick Craig-Wood)
        -   Update all dependencies (Nick Craig-Wood)
        -   Upgrade golangci-lint to v2 and fix code and config
            (albertony)
        -   Add markdown linting to workflow and fix all the docs
            (albertony)
        -   Extend check for edits of autogenerated files to all commits
            in a pull request (albertony)
        -   Set default shell to bash in build.yml (Ross Smith II)
    -   config
        -   Make parsing of Duration options consistent (albertony)
        -   Add error if RCLONE_CONFIG_PASS was supplied it but didn't
            decrypt the config (n4n5)
    -   copy, copyto: Implement logger flags to store result of sync
        (Marvin Rösch)
    -   doc fixes (albertony, Ali Zein Yousuf, Binbin Qian, curlwget, Ed
        Craig-Wood, jinjingroad, Lucas Bremgartner, n4n5, Nick
        Craig-Wood)
    -   hash: Add support for BLAKE3, XXH3, XXH128 (albertony)
    -   http
        -   Add --client-pass support for encrypted --client-key files
            (Nick Craig-Wood)
        -   Allow setting of --http-proxy from the command line (Nick
            Craig-Wood)
    -   lib/mmap: Convert to using unsafe.Slice to avoid deprecated
        reflect.SliceHeader (cui)
    -   lib/transform: Avoid empty charmap entry (albertony)
    -   log: Add log rotation options when using --log-file (Nick
        Craig-Wood)
    -   move, moveto: Implement logger flags to store result of sync
        (Marvin Rösch)
    -   pool: Unify memory between multipart and asyncreader to use one
        pool (Nick Craig-Wood)
    -   purge: Exit with a fatal error if filters are set on
        rclone purge (Nick Craig-Wood)
    -   rc
        -   Add config/unlock to unlock the config file (n4n5)
        -   Fix config/listremotes to send an empty array instead of nil
            (n4n5)
        -   Populate transfer snapshot with "what" value (Timothy
            Jacobs)
    -   serve sftp: Add support for more hashes (crc32, sha256, blake3,
        xxh3, xxh128) (albertony)
    -   transform: Add truncate_keep_extension and truncate_bytes
        (nielash)
-   Bug Fixes
    -   about: Fix potential overflow of about in various backends (Nick
        Craig-Wood)
    -   accounting
        -   Fix incorrect stats with --transfers=1 (Yu Xin)
        -   Fix stats (speed=0 and eta=nil) when starting jobs via rc
            (Nick Craig-Wood)
    -   bisync
        -   Fix concurrent runs via rc (nielash)
        -   Fix --no-slow-hash settings on path2 (nielash)
    -   config: fix problem reading pasted tokens over 4095 bytes (Nick
        Craig-Wood)
    -   oauthutil: Fix nil pointer crash when started with expired token
        (Nick Craig-Wood)
    -   operations: Fix too many connections open when using
        --max-buffer-memory (Nick Craig-Wood)
    -   pool: Fix deadlock with --max-buffer-memory and multipart
        transfers (Nick Craig-Wood)
    -   rc: Fix operations/check ignoring oneWay parameter (houance)
-   Mount
    -   Fix identification of symlinks in directory listings (huangnauh)
-   Local
    -   Configurable supported hashes (albertony)
    -   Fix --copy-links on Windows when listing Junction points (Anagh
        Kumar Baranwal)
-   Azure Blob
    -   Add support for client assertion based authentication (Vikas
        Bhansali)
    -   Fix deadlock with --max-connections with InvalidBlockOrBlob
        errors (Nick Craig-Wood)
    -   Fix double accounting for multipart uploads (Nick Craig-Wood)
-   Azurefiles
    -   Add support for client assertion based authentication (Vikas
        Bhansali)
    -   Fix hash getting erased when modtime is set (nielash)
-   Box
    -   Fix about: cannot unmarshal number 1.0e+18 into Go struct field
        (Nick Craig-Wood)
-   Combine
    -   Fix directory not found errors with ListP interface (Nick
        Craig-Wood)
-   Filescom
    -   Document that hashes need to be enabled (Nick Craig-Wood)
-   FTP
    -   Allow insecure TLS ciphers (Anagh Kumar Baranwal)
    -   Make TLS config default to global TLS config (Nick Craig-Wood)
        -   This allows --ca-cert, --client-cert etc to be used.
        -   This also allows override.ca_cert = XXX to be used in the
            config file.
-   Googlephotos
    -   Added warning for Google Photos compatibility-fixes
        (raider13209)
-   Imagekit
    -   Return correct error when attempting to upload zero length files
        (Nick Craig-Wood)
    -   Don't low level retry uploads (Nick Craig-Wood)
    -   Remove server side Copy method as it was downloading and
        uploading (Nick Craig-Wood)
-   Internetarchive
    -   Fix server side copy of files with & (Nick Craig-Wood)
-   Mega
    -   Fix tls handshake failure (necaran)
-   Oracleobjectstorage
    -   Add read only metadata support (praveen-solanki-oracle)
-   Pikpak
    -   Rewrite upload to bypass AWS S3 manager (wiserain)
    -   Enhance Move for better handling of error and name collision
        (wiserain)
    -   Enhance Copy method to handle name collisions and improve error
        management (wiserain)
    -   Add file name integrity check during upload (wiserain)
-   S3
    -   Add --s3-use-arn-region flag (Nick Craig-Wood)
    -   Fix memory leak by cloning strings (liubingrun)
    -   Fix multipart upload and server side copy when using bucket
        policy SSE-C (Albin Parou)
    -   Fix Content-Type: aws-chunked causing upload errors with
        --metadata (Nick Craig-Wood)
-   SFTP
    -   Add support for more hashes (crc32, sha256, blake3, xxh3,
        xxh128) (albertony)
-   Smb
    -   Add --smb-kerberos-ccache option to set kerberos ccache per smb
        backend (Sudipto Baral)
    -   Refresh Kerberos credentials when ccache file changes (Sudipto
        Baral)
    -   Improve multithreaded upload performance using multiple
        connections (Sudipto Baral)

v1.70.3 - 2025-07-09

See commits

-   Bug Fixes
    -   check: Fix difference report (was reporting error counts)
        (albertony)
    -   march: Fix deadlock when using --no-traverse (Nick Craig-Wood)
    -   doc fixes (albertony, Nick Craig-Wood)
-   Azure Blob
    -   Fix server side copy error "requires exactly one scope" (Nick
        Craig-Wood)
-   B2
    -   Fix finding objects when using --b2-version-at (Davide Bizzarri)
-   Linkbox
    -   Fix upload error "user upload file not exist" (Nick Craig-Wood)
-   Pikpak
    -   Improve error handling for missing links and unrecoverable 500s
        (wiserain)
-   WebDAV
    -   Fix setting modtime to that of local object instead of remote
        (WeidiDeng)

v1.70.2 - 2025-06-27

See commits

-   Bug Fixes
    -   convmv: Make --dry-run logs less noisy (nielash)
    -   sync: Avoid copying dir metadata to itself (nielash)
    -   build: Bump github.com/go-chi/chi/v5 from 5.2.1 to 5.2.2 to fix
        GHSA-vrw8-fxc6-2r93 (dependabot[bot])
    -   convmv: Fix moving to unicode-equivalent name (nielash)
    -   log: Fix deadlock when using systemd logging (Nick Craig-Wood)
    -   pacer: Fix nil pointer deref in RetryError (Nick Craig-Wood)
    -   doc fixes (Ali Zein Yousuf, Nick Craig-Wood)
-   Local
    -   Fix --skip-links on Windows when skipping Junction points (Nick
        Craig-Wood)

v1.70.1 - 2025-06-19

See commits

-   Bug Fixes
    -   convmv: Fix spurious "error running command echo" on Windows
        (Nick Craig-Wood)
    -   doc fixes (albertony, Ed Craig-Wood, jinjingroad)

v1.70.0 - 2025-06-17

See commits

-   New backends
    -   DOI (Flora Thiebaut)
    -   FileLu (kingston125)
    -   New S3 providers:
        -   MEGA S4 (Nick Craig-Wood)
        -   Pure Storage FlashBlade (Jeremy Daer)
-   New commands
    -   convmv: for moving and transforming files (nielash)
-   New Features
    -   Add --max-connections to control maximum backend concurrency
        (Nick Craig-Wood)
    -   Add --max-buffer-memory to limit total buffer memory usage (Nick
        Craig-Wood)
    -   Add transform library and --name-transform flag (nielash)
    -   sync: Implement --list-cutoff to allow on disk sorting for
        reduced memory use (Nick Craig-Wood)
    -   accounting: Add listed stat for number of directory entries
        listed (Nick Craig-Wood)
    -   backend: Skip hash calculation when the hashType is None
        (Oleksiy Stashok)
    -   build
        -   Update to go1.24 and make go1.22 the minimum required
            version (Nick Craig-Wood)
        -   Disable docker builds on PRs & add missing dockerfile
            changes (Anagh Kumar Baranwal)
        -   Modernize Go usage (Nick Craig-Wood)
        -   Update all dependencies (Nick Craig-Wood)
    -   cmd/authorize: Show required arguments in help text (simwai)
    -   cmd/config: add --no-output option (Jess)
    -   cmd/gitannex
        -   Tweak parsing of "rcloneremotename" config (Dan McArdle)
        -   Permit remotes with options (Dan McArdle)
        -   Reject unknown layout modes in INITREMOTE (Dan McArdle)
    -   docker image: Add label org.opencontainers.image.source for
        release notes in Renovate dependency updates (Robin Schneider)
    -   doc fixes (albertony, Andrew Kreimer, Ben Boeckel, Christoph
        Berger, Danny Garside, Dimitri Papadopoulos, eccoisle, Ed
        Craig-Wood, Fernando Fernández, jack, Jeff Geerling, Jugal
        Kishore, kingston125, luzpaz, Markus Gerstel, Matt Ickstadt,
        Michael Kebe, Nick Craig-Wood, PrathameshLakawade, Ser-Bul,
        simonmcnair, Tim White, Zachary Vorhies)
    -   filter:
        -   Add --hash-filter to deterministically select a subset of
            files (Nick Craig-Wood)
        -   Show --min-size and --max-size in --dump filters (Nick
            Craig-Wood)
    -   hash: Add SHA512 support for file hashes (Enduriel)
    -   http servers: Add --user-from-header to use for authentication
        (Moises Lima)
    -   lib/batcher: Deprecate unused option: batch_commit_timeout (Dan
        McArdle)
    -   log:
        -   Remove github.com/sirupsen/logrus and replace with log/slog
            (Nick Craig-Wood)
        -   Add --windows-event-log-level to support Windows Event Log
            (Nick Craig-Wood)
    -   rc
        -   Add add short parameter to core/stats to not return
            transferring and checking (Nick Craig-Wood)
        -   In options/info make FieldName contain a "." if it should be
            nested (Nick Craig-Wood)
        -   Add rc control for serve commands (Nick Craig-Wood)
        -   rcserver: Improve content-type check (Jonathan Giannuzzi)
    -   serve nfs
        -   Update docs to note Windows is not supported (Zachary
            Vorhies)
        -   Change the format of --nfs-cache-type symlink file handles
            (Nick Craig-Wood)
        -   Make metadata files have special file handles (Nick
            Craig-Wood)
    -   touch: Make touch obey --transfers (Nick Craig-Wood)
    -   version: Add --deps flag to show dependencies and other build
        info (Nick Craig-Wood)
-   Bug Fixes
    -   serve s3:
        -   Fix ListObjectsV2 response (fhuber)
        -   Remove redundant handler initialization (Tho Neyugn)
    -   stats: Fix goroutine leak and improve stats accounting process
        (Nathanael Demacon)
-   VFS
    -   Add --vfs-metadata-extension to expose metadata sidecar files
        (Nick Craig-Wood)
-   Azure Blob
    -   Add support for x-ms-tags header (Trevor Starick)
    -   Cleanup uncommitted blocks on upload errors (Nick Craig-Wood)
    -   Speed up server side copies for small files (Nick Craig-Wood)
    -   Implement multipart server side copy (Nick Craig-Wood)
    -   Remove uncommitted blocks on InvalidBlobOrBlock error (Nick
        Craig-Wood)
    -   Fix handling of objects with // in (Nick Craig-Wood)
    -   Handle retry error codes more carefully (Nick Craig-Wood)
    -   Fix errors not being retried when doing single part copy (Nick
        Craig-Wood)
    -   Fix multipart server side copies of 0 sized files (Nick
        Craig-Wood)
-   Azurefiles
    -   Add --azurefiles-use-az and
        --azurefiles-disable-instance-discovery (b-wimmer)
-   B2
    -   Add SkipDestructive handling to backend commands (Pat Patterson)
    -   Use file id from listing when not presented in headers (ahxxm)
-   Cloudinary
    -   Automatically add/remove known media files extensions
        (yuval-cloudinary)
    -   Var naming convention (yuval-cloudinary)
-   Drive
    -   Added backend moveid command (Spencer McCullough)
-   Dropbox
    -   Support Dropbox Paper (Dave Vasilevsky)
-   FTP
    -   Add --ftp-http-proxy to connect via HTTP CONNECT proxy
-   Gofile
    -   Update to use new direct upload endpoint (wbulot)
-   Googlephotos
    -   Update read only and read write scopes to meet Google's
        requirements. (Germán Casares)
-   Iclouddrive
    -   Fix panic and files potentially downloaded twice (Clément
        Wehrung)
-   Internetarchive
    -   Add --internetarchive-metadata="key=value" for setting item
        metadata (Corentin Barreau)
-   Onedrive
    -   Fix "The upload session was not found" errors (Nick Craig-Wood)
    -   Re-add --onedrive-upload-cutoff flag (Nick Craig-Wood)
    -   Fix crash if no metadata was updated (Nick Craig-Wood)
-   Opendrive
    -   Added --opendrive-access flag to handle permissions (Joel K
        Biju)
-   Pcloud
    -   Fix "Access denied. You do not have permissions to perform this
        operation" on large uploads (Nick Craig-Wood)
-   S3
    -   Fix handling of objects with // in (Nick Craig-Wood)
    -   Add IBM IAM signer (Alexander Minbaev)
    -   Split the GCS quirks into --s3-use-x-id and
        --s3-sign-accept-encoding (Nick Craig-Wood)
    -   Implement paged listing interface ListP (Nick Craig-Wood)
    -   Add Pure Storage FlashBlade provider support (Jeremy Daer)
    -   Require custom endpoint for Lyve Cloud v2 support
        (PrathameshLakawade)
    -   MEGA S4 support (Nick Craig-Wood)
-   SFTP
    -   Add --sftp-http-proxy to connect via HTTP CONNECT proxy (Nick
        Craig-Wood)
-   Smb
    -   Add support for kerberos authentication (Jonathan Giannuzzi)
    -   Improve connection pooling efficiency (Jonathan Giannuzzi)
-   WebDAV
    -   Retry propfind on 425 status (Jörn Friedrich Dreyer)
    -   Add an ownCloud Infinite Scale vendor that enables tus chunked
        upload support (Klaas Freitag)

v1.69.3 - 2025-05-21

See commits

-   Bug Fixes
    -   build: Reapply update github.com/golang-jwt/jwt/v5 from 5.2.1 to
        5.2.2 to fix CVE-2025-30204 (dependabot[bot])
    -   build: Update github.com/ebitengine/purego to work around bug in
        go1.24.3 (Nick Craig-Wood)

v1.69.2 - 2025-05-01

See commits

-   Bug fixes
    -   accounting: Fix percentDiff calculation -- (Anagh Kumar
        Baranwal)
    -   build
        -   Update github.com/golang-jwt/jwt/v4 from 4.5.1 to 4.5.2 to
            fix CVE-2025-30204 (dependabot[bot])
        -   Update github.com/golang-jwt/jwt/v5 from 5.2.1 to 5.2.2 to
            fix CVE-2025-30204 (dependabot[bot])
        -   Update golang.org/x/crypto to v0.35.0 to fix CVE-2025-22869
            (Nick Craig-Wood)
        -   Update golang.org/x/net from 0.36.0 to 0.38.0 to fix
            CVE-2025-22870 (dependabot[bot])
        -   Update golang.org/x/net to 0.36.0. to fix CVE-2025-22869
            (dependabot[bot])
        -   Stop building with go < go1.23 as security updates forbade
            it (Nick Craig-Wood)
        -   Fix docker plugin build (Anagh Kumar Baranwal)
    -   cmd: Fix crash if rclone is invoked without any arguments (Janne
        Hellsten)
    -   config: Read configuration passwords from stdin even when
        terminated with EOF (Samantha Bowen)
    -   doc fixes (Andrew Kreimer, Danny Garside, eccoisle, Ed
        Craig-Wood, emyarod, jack, Jugal Kishore, Markus Gerstel,
        Michael Kebe, Nick Craig-Wood, simonmcnair, simwai, Zachary
        Vorhies)
    -   fs: Fix corruption of SizeSuffix with "B" suffix in config (eg
        --min-size) (Nick Craig-Wood)
    -   lib/http: Fix race between Serve() and Shutdown() (Nick
        Craig-Wood)
    -   object: Fix memory object out of bounds Seek (Nick Craig-Wood)
    -   operations: Fix call fmt.Errorf with wrong err (alingse)
    -   rc
        -   Disable the metrics server when running rclone rc
            (hiddenmarten)
        -   Fix debug/* commands not being available over unix sockets
            (Nick Craig-Wood)
    -   serve nfs: Fix unlikely crash (Nick Craig-Wood)
    -   stats: Fix the speed not getting updated after a pause in the
        processing (Anagh Kumar Baranwal)
    -   sync
        -   Fix cpu spinning when empty directory finding with leading
            slashes (Nick Craig-Wood)
        -   Copy dir modtimes even when copyEmptySrcDirs is false
            (ll3006)
-   VFS
    -   Fix directory cache serving stale data (Lorenz Brun)
    -   Fix inefficient directory caching when directory reads are slow
        (huanghaojun)
    -   Fix integration test failures (Nick Craig-Wood)
-   Drive
    -   Metadata: fix error when setting copy-requires-writer-permission
        on a folder (Nick Craig-Wood)
-   Dropbox
    -   Retry link without expiry (Dave Vasilevsky)
-   HTTP
    -   Correct root if definitely pointing to a file (nielash)
-   Iclouddrive
    -   Fix so created files are writable (Ben Alex)
-   Onedrive
    -   Fix metadata ordering in permissions (Nick Craig-Wood)

v1.69.1 - 2025-02-14

See commits

-   Bug Fixes
    -   lib/oauthutil: Fix redirect URL mismatch errors (Nick
        Craig-Wood)
    -   bisync: Fix listings missing concurrent modifications (nielash)
    -   serve s3: Fix list objects encoding-type (Nick Craig-Wood)
    -   fs: Fix confusing "didn't find section in config file" error
        (Nick Craig-Wood)
    -   doc fixes (Christoph Berger, Dimitri Papadopoulos, Matt
        Ickstadt, Nick Craig-Wood, Tim White, Zachary Vorhies)
    -   build: Added parallel docker builds and caching for go build in
        the container (Anagh Kumar Baranwal)
-   VFS
    -   Fix the cache failing to upload symlinks when --links was
        specified (Nick Craig-Wood)
    -   Fix race detected by race detector (Nick Craig-Wood)
    -   Close the change notify channel on Shutdown (izouxv)
-   B2
    -   Fix "fatal error: concurrent map writes" (Nick Craig-Wood)
-   Iclouddrive
    -   Add notes on ADP and Missing PCS cookies (Nick Craig-Wood)
-   Onedrive
    -   Mark German (de) region as deprecated (Nick Craig-Wood)
-   S3
    -   Added new storage class to magalu provider (Bruno Fernandes)
    -   Add DigitalOcean regions SFO2, LON1, TOR1, BLR1 (jkpe)
    -   Add latest Linode Object Storage endpoints (jbagwell-akamai)

v1.69.0 - 2025-01-12

See commits

-   New backends
    -   ICloud Drive (lostb1t)
    -   Cloudinary (yuval-cloudinary)
    -   New S3 providers:
        -   Outscale (Matthias Gatto)
        -   Selectel (Nick Craig-Wood)
-   Security fixes
    -   serve sftp: Resolve CVE-2024-45337 - Misuse of
        ServerConfig.PublicKeyCallback may cause authorization bypass
        (dependabot)
        -   Rclone was not vulnerable to this.
        -   See https://github.com/advisories/GHSA-v778-237x-gjrc
    -   build: Update golang.org/x/net to v0.33.0 to fix
        CVE-2024-45338 - Non-linear parsing of case-insensitive content
        (Nick Craig-Wood)
        -   Rclone was not vulnerable to this.
        -   See https://github.com/advisories/GHSA-w32m-9786-jp63
-   New Features
    -   accounting: Write the current bwlimit to the log on SIGUSR2
        (Nick Craig-Wood)
    -   bisync: Change exit code from 2 to 7 for critically aborted run
        (albertony)
    -   build
        -   Update all dependencies (Nick Craig-Wood)
        -   Replace Windows-specific NewLazyDLL with NewLazySystemDLL
            (albertony)
    -   cmd: Change exit code from 1 to 2 for syntax and usage errors
        (albertony)
    -   docker serve: make sure all mount and VFS options are parsed
        (Nick Craig-Wood)
    -   doc fixes (albertony, Alexandre Hamez, Anthony Metzidis,
        buengese, Dan McArdle, David Seifert, Francesco Frassinelli,
        Michael R. Davis, Nick Craig-Wood, Pawel Palucha, Randy Bush,
        remygrandin, Sam Harrison, shenpengfeng, tgfisher, Thomas ten
        Cate, ToM, Tony Metzidis, vintagefuture, Yxxx)
    -   fs: Make --links flag global and add new --local-links and
        --vfs-links flags (Nick Craig-Wood)
    -   http servers: Disable automatic authentication skipping for unix
        sockets in http servers (Moises Lima)
        -   This was making it impossible to use unix sockets with an
            proxy
        -   This might now cause rclone to need authentication where it
            didn't before
    -   oauthutil: add support for OAuth client credential flow (Martin
        Hassack, Nick Craig-Wood)
    -   operations: make log messages consistent for mkdir/rmdir at INFO
        level (Nick Craig-Wood)
    -   rc: Add relative to vfs/queue-set-expiry (Nick Craig-Wood)
    -   serve dlna: Sort the directory entries by directories first then
        alphabetically by name (Nick Craig-Wood)
    -   serve nfs
        -   Introduce symlink support (Nick Craig-Wood)
        -   Implement --nfs-cache-type symlink (Nick Craig-Wood)
    -   size: Make output compatible with -P (Nick Craig-Wood)
    -   test makefiles: Add --flat flag for making directories with many
        entries (Nick Craig-Wood)
-   Bug Fixes
    -   accounting
        -   Fix global error acounting (Benjamin Legrand)
        -   Fix debug printing when debug wasn't set (Nick Craig-Wood)
        -   Fix race stopping/starting the stats counter (Nick
            Craig-Wood)
    -   rc/job: Use mutex for adding listeners thread safety
        (hayden.pan)
    -   serve docker: Fix incorrect GID assignment (TAKEI Yuya)
    -   serve nfs: Fix missing inode numbers which was messing up
        ls -laR (Nick Craig-Wood)
    -   serve s3: Fix Last-Modified timestamp (Nick Craig-Wood)
    -   serve sftp: Fix loading of authorized keys file with comment on
        last line (albertony)
-   Mount
    -   Introduce symlink support (Filipe Azevedo, Nick Craig-Wood)
    -   Better snap mount error message (divinity76)
    -   mount2: Fix missing . and .. entries (Filipe Azevedo)
-   VFS
    -   With --vfs-used-is-size value is calculated and then thrown away
        (Ilias Ozgur Can Leonard)
    -   Add symlink support to VFS (Filipe Azevedo, Nick Craig-Wood)
        -   This can be enabled with the specific --vfs-links flag or
            the global --links flag
    -   Fix open files disappearing from directory listings (Nick
        Craig-Wood)
    -   Add remote name to vfs cache log messages (Nick Craig-Wood)
-   Cache
    -   Fix parent not getting pinned when remote is a file (nielash)
-   Azure Blob
    -   Add --azureblob-disable-instance-discovery (Nick Craig-Wood)
    -   Add --azureblob-use-az to force the use of the Azure CLI for
        auth (Nick Craig-Wood)
    -   Quit multipart uploads if the context is cancelled (Nick
        Craig-Wood)
-   Azurefiles
    -   Fix missing x-ms-file-request-intent header (Nick Craig-Wood)
-   B2
    -   Add daysFromStartingToCancelingUnfinishedLargeFiles to
        backend lifecycle command (Louis Laureys)
-   Box
    -   Fix server-side copying a file over existing dst (nielash)
    -   Fix panic when decoding corrupted PEM from JWT file (Nick
        Craig-Wood)
-   Drive
    -   Add support for markdown format (Noam Ross)
    -   Implement rclone backend rescue to rescue orphaned files (Nick
        Craig-Wood)
-   Dropbox
    -   Fix server side copying over existing object (Nick Craig-Wood)
    -   Fix return status when full to be fatal error (Nick Craig-Wood)
-   FTP
    -   Implement --ftp-no-check-upload to allow upload to write only
        dirs (Nick Craig-Wood)
    -   Fix ls commands returning empty on "Microsoft FTP Service"
        servers (Francesco Frassinelli)
-   Gofile
    -   Fix server side copying over existing object (Nick Craig-Wood)
-   Google Cloud Storage
    -   Add access token auth with --gcs-access-token (Leandro Piccilli)
    -   Update docs on service account access tokens (Anthony Metzidis)
-   Googlephotos
    -   Implement --gphotos-proxy to allow download of full resolution
        media (Nick Craig-Wood)
    -   Fix nil pointer crash on upload (Nick Craig-Wood)
-   HTTP
    -   Fix incorrect URLs with initial slash (Oleg Kunitsyn)
-   Onedrive
    -   Add support for OAuth client credential flow (Martin Hassack,
        Nick Craig-Wood)
    -   Fix time precision for OneDrive personal (Nick Craig-Wood)
    -   Fix server side copying over existing object (Nick Craig-Wood)
-   Opendrive
    -   Add rclone about support to backend (quiescens)
-   Oracle Object Storage
    -   Make specifying compartmentid optional (Manoj Ghosh)
    -   Quit multipart uploads if the context is cancelled (Nick
        Craig-Wood)
-   Pikpak
    -   Add option to use original file links (wiserain)
-   Protondrive
    -   Improve performance of Proton Drive backend (Lawrence Murray)
-   Putio
    -   Fix server side copying over existing object (Nick Craig-Wood)
-   S3
    -   Add initial --s3-directory-bucket to support AWS Directory
        Buckets (Nick Craig-Wood)
    -   Add Wasabi eu-south-1 region (Diego Monti)
    -   Fix download of compressed files from Cloudflare R2 (Nick
        Craig-Wood)
    -   Rename glacier storage class to flexible retrieval (Henry Lee)
    -   Quit multipart uploads if the context is cancelled (Nick
        Craig-Wood)
-   SFTP
    -   Allow inline ssh public certificate for sftp (Dimitar Ivanov)
    -   Fix nil check when using auth proxy (Nick Craig-Wood)
-   Smb
    -   Add initial support for Kerberos authentication (more work
        needed). (Francesco Frassinelli)
    -   Fix panic if stat fails (Nick Craig-Wood)
-   Sugarsync
    -   Fix server side copying over existing object (Nick Craig-Wood)
-   WebDAV
    -   Nextcloud: implement backoff and retry for 423 LOCKED errors
        (Nick Craig-Wood)
    -   Make --webdav-auth-redirect to fix 401 unauthorized on redirect
        (Nick Craig-Wood)
-   Yandex
    -   Fix server side copying over existing object (Nick Craig-Wood)
-   Zoho
    -   Use download server to accelerate downloads (buengese)
    -   Switch to large file upload API for larger files, fix missing
        URL encoding of filenames for the upload API (buengese)
    -   Print clear error message when missing oauth scope (buengese)
    -   Try to handle rate limits a bit better (buengese)
    -   Add support for private spaces (buengese)
    -   Make upload cutoff configurable (buengese)

v1.68.2 - 2024-11-15

See commits

-   Security fixes
    -   local backend: CVE-2024-52522: fix permission and ownership on
        symlinks with --links and --metadata (Nick Craig-Wood)
        -   Only affects users using --metadata and --links and copying
            files to the local backend
        -   See
            https://github.com/rclone/rclone/security/advisories/GHSA-hrxh-9w67-g4cv
    -   build: bump github.com/golang-jwt/jwt/v4 from 4.5.0 to 4.5.1
        (dependabot)
        -   This is an issue in a dependency which is used for JWT
            certificates
        -   See
            https://github.com/golang-jwt/jwt/security/advisories/GHSA-29wx-vh33-7x7r
-   Bug Fixes
    -   accounting: Fix wrong message on SIGUSR2 to enable/disable
        bwlimit (Nick Craig-Wood)
    -   bisync: Fix output capture restoring the wrong output for logrus
        (Dimitrios Slamaris)
    -   dlna: Fix loggingResponseWriter disregarding log level (Simon
        Bos)
    -   serve s3: Fix excess locking which was making serve s3 single
        threaded (Nick Craig-Wood)
    -   doc fixes (Nick Craig-Wood, tgfisher, Alexandre Hamez, Randy
        Bush)
-   Local
    -   Fix permission and ownership on symlinks with --links and
        --metadata (Nick Craig-Wood)
    -   Fix --copy-links on macOS when cloning (nielash)
-   Onedrive
    -   Fix Retry-After handling to look at 503 errors also (Nick
        Craig-Wood)
-   Pikpak
    -   Fix cid/gcid calculations for fs.OverrideRemote (wiserain)
    -   Fix fatal crash on startup with token that can't be refreshed
        (Nick Craig-Wood)
-   S3
    -   Fix crash when using --s3-download-url after migration to SDKv2
        (Nick Craig-Wood)
    -   Storj provider: fix server-side copy of files bigger than 5GB
        (Kaloyan Raev)
    -   Fix multitenant multipart uploads with CEPH (Nick Craig-Wood)

v1.68.1 - 2024-09-24

See commits

-   Bug Fixes
    -   build: Fix docker release build (ttionya)
    -   doc fixes (Nick Craig-Wood, Pawel Palucha)
    -   fs
        -   Fix --dump filters not always appearing (Nick Craig-Wood)
        -   Fix setting stringArray config values from environment
            variables (Nick Craig-Wood)
    -   rc: Fix default value of --metrics-addr (Nick Craig-Wood)
    -   serve docker: Add missing vfs-read-chunk-streams option in
        docker volume driver (Divyam)
-   Onedrive
    -   Fix spurious "Couldn't decode error response: EOF" DEBUG (Nick
        Craig-Wood)
-   Pikpak
    -   Fix login issue where token retrieval fails (wiserain)
-   S3
    -   Fix rclone ignoring static credentials when env_auth=true (Nick
        Craig-Wood)

v1.68.0 - 2024-09-08

See commits

-   New backends
    -   Files.com (Sam Harrison)
    -   Gofile (Nick Craig-Wood)
    -   Pixeldrain (Fornax)
-   Changed backends
    -   S3 backend updated to use AWS SDKv2 as v1 is now unsupported.
        -   The matrix of providers and auth methods is huge and there
            could be problems with obscure combinations.
        -   Please report problems in a new issue on Github.
-   New commands
    -   config encryption: set, remove and check to manage config file
        encryption (Nick Craig-Wood)
-   New Features
    -   build
        -   Update to go1.23 and make go1.21 the minimum required
            version (Nick Craig-Wood)
        -   Update all dependencies (Nick Craig-Wood)
        -   Disable wasm/js build due to go bug #64856 (Nick Craig-Wood)
        -   Enable custom linting rules with ruleguard via gocritic
            (albertony)
        -   Update logging statements to make --use-json-log work always
            (albertony)
        -   Adding new code quality tests and fixing the fallout
            (albertony)
    -   config
        -   Internal config re-organised to be more consistent and make
            it available from the rc (Nick Craig-Wood)
        -   Avoid remotes with empty names from the environment
            (albertony)
        -   Make listing of remotes more consistent (albertony)
        -   Make getting config values more consistent (albertony)
        -   Use --password-command to set config file password if
            supplied (Nick Craig-Wood)
    -   doc fixes (albertony, crystalstall, David Seifert, Eng Zer Jun,
        Ernie Hershey, Florian Klink, John Oxley, kapitainsky, Mathieu
        Moreau, Nick Craig-Wood, nipil, Pétr Bozsó, Russ Bubley, Sam
        Harrison, Thearas, URenko, Will Miles, yuval-cloudinary)
    -   fs: Allow semicolons as well as spaces in --bwlimit timetable
        parsing (Kyle Reynolds)
    -   help
        -   Global flags help command now takes glob filter (albertony)
        -   Make help command output less distracting (albertony)
    -   lib/encoder: Add Raw encoding for use where no encoding at all
        is required, eg --local-encoding Raw (URenko)
    -   listremotes: Added options for filtering, ordering and json
        output (albertony)
    -   nfsmount
        -   Make the --sudo flag work for umount as well as mount (Nick
            Craig-Wood)
        -   Add -o tcp option to NFS mount options to fix mounting under
            Linux (Nick Craig-Wood)
    -   operations: copy: generate stable partial suffix (Georg Welzel)
    -   rc
        -   Add options/info call to enumerate options (Nick Craig-Wood)
        -   Add option blocks parameter to options/get and options/info
            (Nick Craig-Wood)
        -   Add vfs/queue to show the status of the upload queue (Nick
            Craig-Wood)
        -   Add vfs/queue-set-expiry to adjust expiry of items in the
            VFS queue (Nick Craig-Wood)
        -   Add --unix-socket option to rc command (Florian Klink)
        -   Prevent unmount rc command from sending a STOPPING=1
            sd-notify message (AThePeanut4)
    -   rcserver: Implement prometheus metrics on a dedicated port (Oleg
        Kunitsyn)
    -   serve dlna
        -   Also look at "Subs" subdirectory (Florian Klink)
        -   Don't swallow video.{idx,sub} (Florian Klink)
        -   Set more correct mime type (Florian Klink)
    -   serve nfs
        -   Implement on disk cache for file handles selected with
            --nfs-cache-type (Nick Craig-Wood)
        -   Add tracing to filesystem calls (Nick Craig-Wood)
        -   Mask unimplemented error from chmod (Nick Craig-Wood)
        -   Unify the nfs library logging with rclone's logging better
            (Nick Craig-Wood)
        -   Fix incorrect user id and group id exported to NFS (Nick
            Craig-Wood)
    -   serve s3
        -   Implement --auth-proxy (Sawjan Gurung)
        -   Update to AWS SDKv2 by updating github.com/rclone/gofakes3
            (Nick Craig-Wood)
-   Bug Fixes
    -   bisync: Fix sync time problems with backends that round time (eg
        Dropbox) (nielash)
    -   serve dlna: Fix panic: invalid argument to Int63n (Nick
        Craig-Wood)
-   VFS
    -   Add --vfs-read-chunk-streams to parallel read chunks from files
        (Nick Craig-Wood)
        -   This can increase mount performance on high bandwidth or
            large latency links
    -   Fix cache encoding with special characters (URenko)
-   Local
    -   Fix encoding of root path fix (URenko)
    -   Add server-side copy (using clone) with xattrs on macOS
        (nielash)
        -   --local-no-clone flag to disable cloning for server-side
            copies (nielash)
    -   Support setting custom --metadata during server-side Copy
        (nielash)
-   Azure Blob
    -   Allow anonymous access for public resources (Nick Craig-Wood)
-   B2
    -   Include custom upload headers in large file info (Pat Patterson)
-   Drive
    -   Fix copying Google Docs to a backend which only supports SHA1
        (Nick Craig-Wood)
-   Fichier
    -   Fix detection of Flood Detected error (Nick Craig-Wood)
    -   Fix server side move (Nick Craig-Wood)
-   HTTP
    -   Reload client certificates on expiry (Saleh Dindar)
    -   Support listening on passed FDs (Florian Klink)
-   Jottacloud
    -   Fix setting of metadata on server side move (albertony)
-   Onedrive
    -   Fix nil pointer error when uploading small files (Nick
        Craig-Wood)
-   Pcloud
    -   Implement SetModTime (Georg Welzel)
    -   Implement OpenWriterAt feature to enable multipart uploads
        (Georg Welzel)
    -   Fix failing large file uploads (Georg Welzel)
-   Pikpak
    -   Improve data consistency by ensuring async tasks complete
        (wiserain)
    -   Implement custom hash to replace wrong sha1 (wiserain)
    -   Fix error with copyto command (wiserain)
    -   Optimize file move by removing unnecessary readMetaData() call
        (wiserain)
    -   Non-buffered hash calculation for local source files (wiserain)
    -   Optimize upload by pre-fetching gcid from API (wiserain)
    -   Correct file transfer progress for uploads by hash (wiserain)
    -   Update to using AWS SDK v2 (wiserain)
-   S3
    -   Update to using AWS SDK v2 (Nick Craig-Wood)
        -   Add --s3-sdk-log-mode to control SDKv2 debugging (Nick
            Craig-Wood)
    -   Fix incorrect region for Magalu provider (Filipe Herculano)
    -   Allow restoring from intelligent-tiering storage class (Pawel
        Palucha)
-   SFTP
    -   Use uint32 for mtime to save memory (Tomasz Melcer)
    -   Ignore useless errors when closing the connection pool (Nick
        Craig-Wood)
    -   Support listening on passed FDs (Florian Klink)
-   Swift
    -   Add workarounds for bad listings in Ceph RGW (Paul Collins)
    -   Add total/free space info in about command.
        (fsantagostinobietti)
-   Ulozto
    -   Fix upload of > 2GB files on 32 bit platforms (Tobias Markus)
-   WebDAV
    -   Add --webdav-unix-socket-path to connect to a unix socket
        (Florian Klink)
-   Yandex
    -   Implement custom user agent to help with upload speeds
        (Sebastian Bünger)
-   Zoho
    -   Fix inefficiencies uploading with new API to avoid throttling
        (Nick Craig-Wood)

v1.67.0 - 2024-06-14

See commits

-   New backends
    -   uloz.to (iotmaestro)
    -   New S3 providers
        -   Magalu Object Storage (Bruno Fernandes)
-   New commands
    -   gitannex: Enables git-annex to store and retrieve content from
        an rclone remote (Dan McArdle)
-   New Features
    -   accounting: Add deleted files total size to status summary line
        (Kyle Reynolds)
    -   build
        -   Fix CVE-2023-45288 by upgrading golang.org/x/net (Nick
            Craig-Wood)
        -   Fix CVE-2024-35255 by upgrading
            github.com/Azure/azure-sdk-for-go/sdk/azidentity to 1.6.0
            (dependabot)
        -   Convert source files with CRLF to LF (albertony)
        -   Update all dependencies (Nick Craig-Wood)
    -   doc updates (albertony, Alex Garel, Dave Nicolson, Dominik Joe
        Pantůček, Eric Wolf, Erisa A, Evan Harris, Evan McBeth, Gachoud
        Philippe, hidewrong, jakzoe, jumbi77, kapitainsky, Kyle
        Reynolds, Lewis Hook, Nick Craig-Wood, overallteach,
        pawsey-kbuckley, Pieter van Oostrum, psychopatt, racerole,
        static-moonlight, Warrentheo, yudrywet, yumeiyin )
    -   ncdu: Do not quit on Esc to aid usability (Katia Esposito)
    -   rcserver: Set ModTime for dirs and files served by --rc-serve
        (Nikita Shoshin)
-   Bug Fixes
    -   bisync: Add integration tests against all backends and fix many
        many problems (nielash)
    -   config: Fix default value for description (Nick Craig-Wood)
    -   copy: Fix nil pointer dereference when corrupted on transfer
        with nil dst (nielash)
    -   fs
        -   Improve JSON Unmarshalling for Duration types (Kyle
            Reynolds)
        -   Close the CPU profile on exit (guangwu)
        -   Replace /bin/bash with /usr/bin/env bash (Florian Klink)
    -   oauthutil: Clear client secret if client ID is set (Michael
        Terry)
    -   operations
        -   Rework rcat so that it doesn't call the --metadata-mapper
            twice (Nick Craig-Wood)
        -   Ensure SrcFsType is set correctly when using
            --metadata-mapper (Nick Craig-Wood)
        -   Fix "optional feature not implemented" error with a crypted
            sftp bug (Nick Craig-Wood)
        -   Fix very long file names when using copy with --partial
            (Nick Craig-Wood)
        -   Fix retries downloading too much data with certain backends
            (Nick Craig-Wood)
        -   Fix move when dst is nil and fdst is case-insensitive
            (nielash)
        -   Fix lsjson --encrypted when using --crypt-XXX parameters
            (Nick Craig-Wood)
        -   Fix missing metadata for multipart transfers to local disk
            (Nick Craig-Wood)
        -   Fix incorrect modtime on some multipart transfers (Nick
            Craig-Wood)
        -   Fix hashing problem in integration tests (Nick Craig-Wood)
    -   rc
        -   Fix stats groups being ignored in operations/check (Nick
            Craig-Wood)
        -   Fix incorrect Content-Type in HTTP API (Kyle Reynolds)
    -   serve s3
        -   Fix Last-Modified header format (Butanediol)
        -   Fix in-memory metadata storing wrong modtime (nielash)
        -   Fix XML of error message (Nick Craig-Wood)
    -   serve webdav: Fix webdav with --baseurl under Windows (Nick
        Craig-Wood)
    -   serve dlna: Make BrowseMetadata more compliant (albertony)
    -   serve http: Added Content-Length header when HTML directory is
        served (Sunny)
    -   sync
        -   Don't sync directories if they haven't been modified (Nick
            Craig-Wood)
        -   Don't test reading metadata if we can't write it (Nick
            Craig-Wood)
        -   Fix case normalisation (problem on on s3) (Nick Craig-Wood)
        -   Fix management of empty directories to make it more accurate
            (Nick Craig-Wood)
        -   Fix creation of empty directories when
            --create-empty-src-dirs=false (Nick Craig-Wood)
        -   Fix directory modification times not being set (Nick
            Craig-Wood)
        -   Fix "failed to update directory timestamp or metadata:
            directory not found" (Nick Craig-Wood)
        -   Fix expecting SFTP to have MkdirMetadata method: optional
            feature not implemented (Nick Craig-Wood)
    -   test info: Improve cleanup of temp files (Kyle Reynolds)
    -   touch: Fix using -R on certain backends (Nick Craig-Wood)
-   Mount
    -   Add --direct-io flag to force uncached access (Nick Craig-Wood)
-   VFS
    -   Fix download loop when file size shrunk (Nick Craig-Wood)
    -   Fix renaming a directory (nielash)
-   Local
    -   Add --local-time-type to use mtime/atime/btime/ctime as the time
        (Nick Craig-Wood)
    -   Allow SeBackupPrivilege and/or SeRestorePrivilege to work on
        Windows (Charles Hamilton)
-   Azure Blob
    -   Fix encoding issue with dir path comparison (nielash)
-   B2
    -   Add new cleanup and cleanup-hidden backend commands. (Pat
        Patterson)
    -   Update B2 URLs to new home (Nick Craig-Wood)
-   Chunker
    -   Fix startup when root points to composite multi-chunk file
        without metadata (nielash)
    -   Fix case-insensitive comparison on local without metadata
        (nielash)
    -   Fix "finalizer already set" error (nielash)
-   Drive
    -   Add backend query command for general purpose querying of files
        (John-Paul Smith)
    -   Stop sending notification emails when setting permissions (Nick
        Craig-Wood)
    -   Fix server side copy with metadata from my drive to shared drive
        (Nick Craig-Wood)
    -   Set all metadata permissions and return error summary instead of
        stopping on the first error (Nick Craig-Wood)
    -   Make errors setting permissions into no retry errors (Nick
        Craig-Wood)
    -   Fix description being overwritten on server side moves (Nick
        Craig-Wood)
    -   Allow setting metadata to fail if failok flag is set (Nick
        Craig-Wood)
    -   Fix panic when using --metadata-mapper on large google doc files
        (Nick Craig-Wood)
-   Dropbox
    -   Add --dropbox-root-namespace to override the root namespace
        (Bill Fraser)
-   Google Cloud Storage
    -   Fix encoding issue with dir path comparison (nielash)
-   Hdfs
    -   Fix f.String() not including subpath (nielash)
-   Http
    -   Add --http-no-escape to not escape URL metacharacters in path
        names (Kyle Reynolds)
-   Jottacloud
    -   Set metadata on server side copy and move (albertony)
-   Linkbox
    -   Fix working with names longer than 8-25 Unicode chars. (Vitaly)
    -   Fix list paging and optimized synchronization. (gvitali)
-   Mailru
    -   Attempt to fix throttling by increasing min sleep to 100ms (Nick
        Craig-Wood)
-   Memory
    -   Fix dst mutating src after server-side copy (nielash)
    -   Fix deadlock in operations.Purge (nielash)
    -   Fix incorrect list entries when rooted at subdirectory (nielash)
-   Onedrive
    -   Add --onedrive-hard-delete to permanently delete files (Nick
        Craig-Wood)
    -   Make server-side copy work in more scenarios (YukiUnHappy)
    -   Fix "unauthenticated: Unauthenticated" errors when downloading
        (Nick Craig-Wood)
    -   Fix --metadata-mapper being called twice if writing permissions
        (nielash)
    -   Set all metadata permissions and return error summary instead of
        stopping on the first error (nielash)
    -   Make errors setting permissions into no retry errors (Nick
        Craig-Wood)
    -   Skip writing permissions with 'owner' role (nielash)
    -   Fix references to deprecated permissions properties (nielash)
    -   Add support for group permissions (nielash)
    -   Allow setting permissions to fail if failok flag is set (Nick
        Craig-Wood)
-   Pikpak
    -   Make getFile() usage more efficient to avoid the download limit
        (wiserain)
    -   Improve upload reliability and resolve potential file conflicts
        (wiserain)
    -   Implement configurable chunk size for multipart upload
        (wiserain)
-   Protondrive
    -   Don't auth with an empty access token (Michał Dzienisiewicz)
-   Qingstor
    -   Disable integration tests as test account suspended (Nick
        Craig-Wood)
-   Quatrix
    -   Fix f.String() not including subpath (nielash)
-   S3
    -   Add new AWS region il-central-1 Tel Aviv (yoelvini)
    -   Update Scaleway's configuration options (Alexandre Lavigne)
    -   Ceph: fix quirks when creating buckets to fix trying to create
        an existing bucket (Thomas Schneider)
    -   Fix encoding issue with dir path comparison (nielash)
    -   Fix 405 error on HEAD for delete marker with versionId (nielash)
    -   Validate --s3-copy-cutoff size before copy (hoyho)
-   SFTP
    -   Add --sftp-connections to limit the maximum number of
        connections (Tomasz Melcer)
-   Storj
    -   Update storj.io/uplink to latest release (JT Olio)
    -   Update bio on request (Nick Craig-Wood)
-   Swift
    -   Implement --swift-use-segments-container to allow >5G files on
        Blomp (Nick Craig-Wood)
-   Union
    -   Fix deleting dirs when all remotes can't have empty dirs (Nick
        Craig-Wood)
-   WebDAV
    -   Fix setting modification times erasing checksums on owncloud and
        nextcloud (nielash)
    -   owncloud: Add --webdav-owncloud-exclude-mounts which allows
        excluding mounted folders when listing remote resources (Thomas
        Müller)
-   Zoho
    -   Fix throttling problem when uploading files (Nick Craig-Wood)
    -   Use cursor listing for improved performance (Nick Craig-Wood)
    -   Retry reading info after upload if size wasn't returned (Nick
        Craig-Wood)
    -   Remove simple file names complication which is no longer needed
        (Nick Craig-Wood)
    -   Sleep for 60 seconds if rate limit error received (Nick
        Craig-Wood)

v1.66.0 - 2024-03-10

See commits

-   Major features
    -   Rclone will now sync directory modification times if the backend
        supports it.
        -   This can be disabled with --no-update-dir-modtime
        -   See the overview and look for the D flags in the ModTime
            column to see which backends support it.
    -   Rclone will now sync directory metadata if the backend supports
        it when -M/--metadata is in use.
        -   See the overview and look for the D flags in the Metadata
            column to see which backends support it.
    -   Bisync has received many updates see below for more details or
        bisync's changelog
-   Removed backends
    -   amazonclouddrive: Remove Amazon Drive backend code and docs
        (Nick Craig-Wood)
-   New Features
    -   backend
        -   Add description field for all backends (Paul Stern)
    -   build
        -   Update to go1.22 and make go1.20 the minimum required
            version (Nick Craig-Wood)
        -   Fix CVE-2024-24786 by upgrading google.golang.org/protobuf
            (Nick Craig-Wood)
    -   check: Respect --no-unicode-normalization and --ignore-case-sync
        for --checkfile (nielash)
    -   cmd: Much improved shell auto completion which reduces the size
        of the completion file and works faster (Nick Craig-Wood)
    -   doc updates (albertony, ben-ba, Eli, emyarod, huajin tong, Jack
        Provance, kapitainsky, keongalvin, Nick Craig-Wood, nielash,
        rarspace01, rzitzer, Tera, Vincent Murphy)
    -   fs: Add more detailed logging for file includes/excludes (Kyle
        Reynolds)
    -   lsf
        -   Add --time-format flag (nielash)
        -   Make metadata appear for directories (Nick Craig-Wood)
    -   lsjson: Make metadata appear for directories (Nick Craig-Wood)
    -   rc
        -   Add srcFs and dstFs to core/stats and core/transferred stats
            (Nick Craig-Wood)
        -   Add operations/hashsum to the rc as rclone hashsum
            equivalent (Nick Craig-Wood)
        -   Add config/paths to the rc as rclone config paths equivalent
            (Nick Craig-Wood)
    -   sync
        -   Optionally report list of synced paths to file (nielash)
        -   Implement directory sync for mod times and metadata (Nick
            Craig-Wood)
        -   Don't set directory modtimes if already set (nielash)
        -   Don't sync directory modtimes from backends which don't have
            directories (Nick Craig-Wood)
-   Bug Fixes
    -   backend
        -   Make backends which use oauth implement the Shutdown and
            shutdown the oauth properly (rkonfj)
    -   bisync
        -   Handle unicode and case normalization consistently (nielash)
        -   Partial uploads known issue on local/ftp/sftp has been
            resolved (unless using --inplace) (nielash)
        -   Fixed handling of unicode normalization and case
            insensitivity, support for --fix-case, --ignore-case-sync,
            --no-unicode-normalization (nielash)
        -   Bisync no longer fails to find the correct listing file when
            configs are overridden with backend-specific flags.
            (nielash)
    -   nfsmount
        -   Fix exit after external unmount (nielash)
        -   Fix --volname being ignored (nielash)
    -   operations
        -   Fix renaming a file on macOS (nielash)
        -   Fix case-insensitive moves in operations.Move (nielash)
        -   Fix TestCaseInsensitiveMoveFileDryRun on chunker integration
            tests (nielash)
        -   Fix TestMkdirModTime test (Nick Craig-Wood)
        -   Fix TestSetDirModTime for backends with SetDirModTime but
            not Metadata (Nick Craig-Wood)
        -   Fix typo in log messages (nielash)
    -   serve nfs: Fix writing files via Finder on macOS (nielash)
    -   serve restic: Fix error handling (Michael Eischer)
    -   serve webdav: Fix --baseurl without leading / (Nick Craig-Wood)
    -   stats: Fix race between ResetCounters and stopAverageLoop called
        from time.AfterFunc (Nick Craig-Wood)
    -   sync
        -   --fix-case flag to rename case insensitive dest (nielash)
        -   Use operations.DirMove instead of sync.MoveDir for
            --fix-case (nielash)
    -   systemd: Fix detection and switch to the coreos package
        everywhere rather than having 2 separate libraries (Anagh Kumar
        Baranwal)
-   Mount
    -   Fix macOS not noticing errors with --daemon (Nick Craig-Wood)
    -   Notice daemon dying much quicker (Nick Craig-Wood)
-   VFS
    -   Fix unicode normalization on macOS (nielash)
-   Bisync
    -   Copies and deletes are now handled in one operation instead of
        two (nielash)
    -   --track-renames and --backup-dir are now supported (nielash)
    -   Final listings are now generated from sync results, to avoid
        needing to re-list (nielash)
    -   Bisync is now much more resilient to changes that happen during
        a bisync run, and far less prone to critical errors / undetected
        changes (nielash)
    -   Bisync is now capable of rolling a file listing back in cases of
        uncertainty, essentially marking the file as needing to be
        rechecked next time. (nielash)
    -   A few basic terminal colors are now supported, controllable with
        --color (AUTO|NEVER|ALWAYS) (nielash)
    -   Initial listing snapshots of Path1 and Path2 are now generated
        concurrently, using the same "march" infrastructure as check and
        sync, for performance improvements and less risk of error.
        (nielash)
    -   --resync is now much more efficient (especially for users of
        --create-empty-src-dirs) (nielash)
    -   Google Docs (and other files of unknown size) are now supported
        (with the same options as in sync) (nielash)
    -   Equality checks before a sync conflict rename now fall back to
        cryptcheck (when possible) or --download, (nielash) instead of
        of --size-only, when check is not available.
    -   Bisync now fully supports comparing based on any combination of
        size, modtime, and checksum, lifting the prior restriction on
        backends without modtime support. (nielash)
    -   Bisync now supports a "Graceful Shutdown" mode to cleanly cancel
        a run early without requiring --resync. (nielash)
    -   New --recover flag allows robust recovery in the event of
        interruptions, without requiring --resync. (nielash)
    -   A new --max-lock setting allows lock files to automatically
        renew and expire, for better automatic recovery when a run is
        interrupted. (nielash)
    -   Bisync now supports auto-resolving sync conflicts and
        customizing rename behavior with new --conflict-resolve,
        --conflict-loser, and --conflict-suffix flags. (nielash)
    -   A new --resync-mode flag allows more control over which version
        of a file gets kept during a --resync. (nielash)
    -   Bisync now supports --retries and --retries-sleep (when
        --resilient is set.) (nielash)
    -   Clarify file operation directions in dry-run logs (Kyle
        Reynolds)
-   Local
    -   Fix cleanRootPath on Windows after go1.21.4 stdlib update
        (nielash)
    -   Implement setting modification time on directories (nielash)
    -   Implement modtime and metadata for directories (Nick Craig-Wood)
    -   Fix setting of btime on directories on Windows (Nick Craig-Wood)
    -   Delete backend implementation of Purge to speed up and make
        stats (Nick Craig-Wood)
    -   Support metadata setting and mapping on server side Move (Nick
        Craig-Wood)
-   Cache
    -   Implement setting modification time on directories (if supported
        by wrapped remote) (nielash)
    -   Implement setting metadata on directories (Nick Craig-Wood)
-   Crypt
    -   Implement setting modification time on directories (if supported
        by wrapped remote) (nielash)
    -   Implement setting metadata on directories (Nick Craig-Wood)
    -   Improve handling of undecryptable file names (nielash)
    -   Add missing error check spotted by linter (Nick Craig-Wood)
-   Azure Blob
    -   Implement --azureblob-delete-snapshots (Nick Craig-Wood)
-   B2
    -   Clarify exactly what --b2-download-auth-duration does in the
        docs (Nick Craig-Wood)
-   Chunker
    -   Implement setting modification time on directories (if supported
        by wrapped remote) (nielash)
    -   Implement setting metadata on directories (Nick Craig-Wood)
-   Combine
    -   Implement setting modification time on directories (if supported
        by wrapped remote) (nielash)
    -   Implement setting metadata on directories (Nick Craig-Wood)
    -   Fix directory metadata error on upstream root (nielash)
    -   Fix directory move across upstreams (nielash)
-   Compress
    -   Implement setting modification time on directories (if supported
        by wrapped remote) (nielash)
    -   Implement setting metadata on directories (Nick Craig-Wood)
-   Drive
    -   Implement setting modification time on directories (nielash)
    -   Implement modtime and metadata setting for directories (Nick
        Craig-Wood)
    -   Support metadata setting and mapping on server side Move,Copy
        (Nick Craig-Wood)
-   FTP
    -   Fix mkdir with rsftp which is returning the wrong code (Nick
        Craig-Wood)
-   Hasher
    -   Implement setting modification time on directories (if supported
        by wrapped remote) (nielash)
    -   Implement setting metadata on directories (Nick Craig-Wood)
    -   Fix error from trying to stop an already-stopped db (nielash)
    -   Look for cached hash if passed hash unexpectedly blank (nielash)
-   Imagekit
    -   Updated docs and web content (Harshit Budhraja)
    -   Updated overview - supported operations (Harshit Budhraja)
-   Mega
    -   Fix panic with go1.22 (Nick Craig-Wood)
-   Netstorage
    -   Fix Root to return correct directory when pointing to a file
        (Nick Craig-Wood)
-   Onedrive
    -   Add metadata support (nielash)
-   Opendrive
    -   Fix moving file/folder within the same parent dir (nielash)
-   Oracle Object Storage
    -   Support backend restore command (Nikhil Ahuja)
    -   Support workload identity authentication for OKE (Anders
        Swanson)
-   Protondrive
    -   Fix encoding of Root method (Nick Craig-Wood)
-   Quatrix
    -   Fix Content-Range header (Volodymyr)
    -   Add option to skip project folders (Oksana Zhykina)
    -   Fix Root to return correct directory when pointing to a file
        (Nick Craig-Wood)
-   S3
    -   Add --s3-version-deleted to show delete markers in listings when
        using versions. (Nick Craig-Wood)
    -   Add IPv6 support with option --s3-use-dual-stack (Anthony
        Metzidis)
    -   Copy parts in parallel when doing chunked server side copy (Nick
        Craig-Wood)
    -   GCS provider: fix server side copy of files bigger than 5G (Nick
        Craig-Wood)
    -   Support metadata setting and mapping on server side Copy (Nick
        Craig-Wood)
-   Seafile
    -   Fix download/upload error when FILE_SERVER_ROOT is relative
        (DanielEgbers)
    -   Fix Root to return correct directory when pointing to a file
        (Nick Craig-Wood)
-   SFTP
    -   Implement setting modification time on directories (nielash)
    -   Set directory modtimes update on write flag (Nick Craig-Wood)
    -   Shorten wait delay for external ssh binaries now that we are
        using go1.20 (Nick Craig-Wood)
-   Swift
    -   Avoid unnecessary container versioning check (Joe Cai)
-   Union
    -   Implement setting modification time on directories (if supported
        by wrapped remote) (nielash)
    -   Implement setting metadata on directories (Nick Craig-Wood)
-   WebDAV
    -   Reduce priority of chunks upload log (Gabriel Ramos)
    -   owncloud: Add config owncloud_exclude_shares which allows to
        exclude shared files and folders when listing remote resources
        (Thomas Müller)

v1.65.2 - 2024-01-24

See commits

-   Bug Fixes
    -   build: bump github.com/cloudflare/circl from 1.3.6 to 1.3.7
        (dependabot)
    -   docs updates (Nick Craig-Wood, kapitainsky, nielash, Tera,
        Harshit Budhraja)
-   VFS
    -   Fix stale data when using --vfs-cache-mode full (Nick
        Craig-Wood)
-   Azure Blob
    -   IMPORTANT Fix data corruption bug - see #7590 (Nick Craig-Wood)

v1.65.1 - 2024-01-08

See commits

-   Bug Fixes
    -   build
        -   Bump golang.org/x/crypto to fix ssh terrapin CVE-2023-48795
            (dependabot)
        -   Update to go1.21.5 to fix Windows path problems (Nick
            Craig-Wood)
        -   Fix docker build on arm/v6 (Nick Craig-Wood)
    -   install.sh: fix harmless error message on install (Nick
        Craig-Wood)
    -   accounting: fix stats to show server side transfers (Nick
        Craig-Wood)
    -   doc fixes (albertony, ben-ba, Eli Orzitzer, emyarod, keongalvin,
        rarspace01)
    -   nfsmount: Compile for all unix oses, add --sudo and fix
        error/option handling (Nick Craig-Wood)
    -   operations: Fix files moved by rclone move not being counted as
        transfers (Nick Craig-Wood)
    -   oauthutil: Avoid panic when *token and *ts.token are the same
        (rkonfj)
    -   serve s3: Fix listing oddities (Nick Craig-Wood)
-   VFS
    -   Note that --vfs-refresh runs in the background (Nick Craig-Wood)
-   Azurefiles
    -   Fix storage base url (Oksana)
-   Crypt
    -   Fix rclone move a file over itself deleting the file (Nick
        Craig-Wood)
-   Chunker
    -   Fix rclone move a file over itself deleting the file (Nick
        Craig-Wood)
-   Compress
    -   Fix rclone move a file over itself deleting the file (Nick
        Craig-Wood)
-   Dropbox
    -   Fix used space on dropbox team accounts (Nick Craig-Wood)
-   FTP
    -   Fix multi-thread copy (WeidiDeng)
-   Googlephotos
    -   Fix nil pointer exception when batch failed (Nick Craig-Wood)
-   Hasher
    -   Fix rclone move a file over itself deleting the file (Nick
        Craig-Wood)
    -   Fix invalid memory address error when MaxAge == 0 (nielash)
-   Onedrive
    -   Fix error listing: unknown object type <nil> (Nick Craig-Wood)
    -   Fix "unauthenticated: Unauthenticated" errors when uploading
        (Nick Craig-Wood)
-   Oracleobjectstorage
    -   Fix object storage endpoint for custom endpoints (Manoj Ghosh)
    -   Multipart copy create bucket if it doesn't exist. (Manoj Ghosh)
-   Protondrive
    -   Fix CVE-2023-45286 / GHSA-xwh9-gc39-5298 (Nick Craig-Wood)
-   S3
    -   Fix crash if no UploadId in multipart upload (Nick Craig-Wood)
-   Smb
    -   Fix shares not listed by updating go-smb2 (halms)
-   Union
    -   Fix rclone move a file over itself deleting the file (Nick
        Craig-Wood)

v1.65.0 - 2023-11-26

See commits

-   New backends
    -   Azure Files (karan, moongdal, Nick Craig-Wood)
    -   ImageKit (Abhinav Dhiman)
    -   Linkbox (viktor, Nick Craig-Wood)
-   New commands
    -   serve s3: Let rclone act as an S3 compatible server (Mikubill,
        Artur Neumann, Saw-jan, Nick Craig-Wood)
    -   nfsmount: mount command to provide mount mechanism on macOS
        without FUSE (Saleh Dindar)
    -   serve nfs: to serve a remote for use by nfsmount (Saleh Dindar)
-   New Features
    -   install.sh: Clean up temp files in install script (Jacob Hands)
    -   build
        -   Update all dependencies (Nick Craig-Wood)
        -   Refactor version info and icon resource handling on windows
            (albertony)
    -   doc updates (albertony, alfish2000, asdffdsazqqq, Dimitri
        Papadopoulos, Herby Gillot, Joda Stößer, Manoj Ghosh, Nick
        Craig-Wood)
    -   Implement --metadata-mapper to transform metadata with a user
        supplied program (Nick Craig-Wood)
    -   Add ChunkWriterDoesntSeek feature flag and set it for b2 (Nick
        Craig-Wood)
    -   lib/http: Export basic go string functions for use in --template
        (Gabriel Espinoza)
    -   makefile: Use POSIX compatible install arguments (Mina Galić)
    -   operations
        -   Use less memory when doing multithread uploads (Nick
            Craig-Wood)
        -   Implement --partial-suffix to control extension of temporary
            file names (Volodymyr)
    -   rc
        -   Add operations/check to the rc API (Nick Craig-Wood)
        -   Always report an error as JSON (Nick Craig-Wood)
        -   Set Last-Modified header for files served by --rc-serve
            (Nikita Shoshin)
    -   size: Dont show duplicate object count when less than 1k
        (albertony)
-   Bug Fixes
    -   fshttp: Fix --contimeout being ignored (你知道未来吗)
    -   march: Fix excessive parallelism when using --no-traverse (Nick
        Craig-Wood)
    -   ncdu: Fix crash when re-entering changed directory after rescan
        (Nick Craig-Wood)
    -   operations
        -   Fix overwrite of destination when multi-thread transfer
            fails (Nick Craig-Wood)
        -   Fix invalid UTF-8 when truncating file names when not using
            --inplace (Nick Craig-Wood)
    -   serve dnla: Fix crash on graceful exit (wuxingzhong)
-   Mount
    -   Disable mount for freebsd and alias cmount as mount on that
        platform (Nick Craig-Wood)
-   VFS
    -   Add --vfs-refresh flag to read all the directories on start
        (Beyond Meat)
    -   Implement Name() method in WriteFileHandle and ReadFileHandle
        (Saleh Dindar)
    -   Add go-billy dependency and make sure vfs.Handle implements
        billy.File (Saleh Dindar)
    -   Error out early if can't upload 0 length file (Nick Craig-Wood)
-   Local
    -   Fix copying from Windows Volume Shadows (Nick Craig-Wood)
-   Azure Blob
    -   Add support for cold tier (Ivan Yanitra)
-   B2
    -   Implement "rclone backend lifecycle" to read and set bucket
        lifecycles (Nick Craig-Wood)
    -   Implement --b2-lifecycle to control lifecycle when creating
        buckets (Nick Craig-Wood)
    -   Fix listing all buckets when not needed (Nick Craig-Wood)
    -   Fix multi-thread upload with copyto going to wrong name (Nick
        Craig-Wood)
    -   Fix server side chunked copy when file size was exactly
        --b2-copy-cutoff (Nick Craig-Wood)
    -   Fix streaming chunked files an exact multiple of chunk size
        (Nick Craig-Wood)
-   Box
    -   Filter more EventIDs when polling (David Sze)
    -   Add more logging for polling (David Sze)
    -   Fix performance problem reading metadata for single files (Nick
        Craig-Wood)
-   Drive
    -   Add read/write metadata support (Nick Craig-Wood)
    -   Add support for SHA-1 and SHA-256 checksums (rinsuki)
    -   Add --drive-show-all-gdocs to allow unexportable gdocs to be
        server side copied (Nick Craig-Wood)
    -   Add a note that --drive-scope accepts comma-separated list of
        scopes (Keigo Imai)
    -   Fix error updating created time metadata on existing object
        (Nick Craig-Wood)
    -   Fix integration tests by enabling metadata support from the
        context (Nick Craig-Wood)
-   Dropbox
    -   Factor batcher into lib/batcher (Nick Craig-Wood)
    -   Fix missing encoding for rclone purge (Nick Craig-Wood)
-   Google Cloud Storage
    -   Fix 400 Bad request errors when using multi-thread copy (Nick
        Craig-Wood)
-   Googlephotos
    -   Implement batcher for uploads (Nick Craig-Wood)
-   Hdfs
    -   Added support for list of namenodes in hdfs remote config
        (Tayo-pasedaRJ)
-   HTTP
    -   Implement set backend command to update running backend (Nick
        Craig-Wood)
    -   Enable methods used with WebDAV (Alen Šiljak)
-   Jottacloud
    -   Add support for reading and writing metadata (albertony)
-   Onedrive
    -   Implement ListR method which gives --fast-list support (Nick
        Craig-Wood)
        -   This must be enabled with the --onedrive-delta flag
-   Quatrix
    -   Add partial upload support (Oksana Zhykina)
    -   Overwrite files on conflict during server-side move (Oksana
        Zhykina)
-   S3
    -   Add Linode provider (Nick Craig-Wood)
    -   Add docs on how to add a new provider (Nick Craig-Wood)
    -   Fix no error being returned when creating a bucket we don't own
        (Nick Craig-Wood)
    -   Emit a debug message if anonymous credentials are in use (Nick
        Craig-Wood)
    -   Add --s3-disable-multipart-uploads flag (Nick Craig-Wood)
    -   Detect looping when using gcs and versions (Nick Craig-Wood)
-   SFTP
    -   Implement --sftp-copy-is-hardlink to server side copy as
        hardlink (Nick Craig-Wood)
-   Smb
    -   Fix incorrect about size by switching to
        github.com/cloudsoda/go-smb2 fork (Nick Craig-Wood)
    -   Fix modtime of multithread uploads by setting PartialUploads
        (Nick Craig-Wood)
-   WebDAV
    -   Added an rclone vendor to work with rclone serve webdav (Adithya
        Kumar)

v1.64.2 - 2023-10-19

See commits

-   Bug Fixes
    -   selfupdate: Fix "invalid hashsum signature" error (Nick
        Craig-Wood)
    -   build: Fix docker build running out of space (Nick Craig-Wood)

v1.64.1 - 2023-10-17

See commits

-   Bug Fixes
    -   cmd: Make --progress output logs in the same format as without
        (Nick Craig-Wood)
    -   docs fixes (Dimitri Papadopoulos Orfanos, Herby Gillot, Manoj
        Ghosh, Nick Craig-Wood)
    -   lsjson: Make sure we set the global metadata flag too (Nick
        Craig-Wood)
    -   operations
        -   Ensure concurrency is no greater than the number of chunks
            (Pat Patterson)
        -   Fix OpenOptions ignored in copy if operation was a
            multiThreadCopy (Vitor Gomes)
        -   Fix error message on delete to have file name (Nick
            Craig-Wood)
    -   serve sftp: Return not supported error for not supported
        commands (Nick Craig-Wood)
    -   build: Upgrade golang.org/x/net to v0.17.0 to fix HTTP/2 rapid
        reset (Nick Craig-Wood)
    -   pacer: Fix b2 deadlock by defaulting max connections to
        unlimited (Nick Craig-Wood)
-   Mount
    -   Fix automount not detecting drive is ready (Nick Craig-Wood)
-   VFS
    -   Fix update dir modification time (Saleh Dindar)
-   Azure Blob
    -   Fix "fatal error: concurrent map writes" (Nick Craig-Wood)
-   B2
    -   Fix multipart upload: corrupted on transfer: sizes differ XXX vs
        0 (Nick Craig-Wood)
    -   Fix locking window when getting multipart upload URL (Nick
        Craig-Wood)
    -   Fix server side copies greater than 4GB (Nick Craig-Wood)
    -   Fix chunked streaming uploads (Nick Craig-Wood)
    -   Reduce default --b2-upload-concurrency to 4 to reduce memory
        usage (Nick Craig-Wood)
-   Onedrive
    -   Fix the configurator to allow /teams/ID in the config (Nick
        Craig-Wood)
-   Oracleobjectstorage
    -   Fix OpenOptions being ignored in uploadMultipart with
        chunkWriter (Nick Craig-Wood)
-   S3
    -   Fix slice bounds out of range error when listing (Nick
        Craig-Wood)
    -   Fix OpenOptions being ignored in uploadMultipart with
        chunkWriter (Vitor Gomes)
-   Storj
    -   Update storj.io/uplink to v1.12.0 (Kaloyan Raev)

v1.64.0 - 2023-09-11

See commits

-   New backends
    -   Proton Drive (Chun-Hung Tseng)
    -   Quatrix (Oksana, Volodymyr Kit)
    -   New S3 providers
        -   Synology C2 (BakaWang)
        -   Leviia (Benjamin)
    -   New Jottacloud providers
        -   Onlime (Fjodor42)
        -   Telia Sky (NoLooseEnds)
-   Major changes
    -   Multi-thread transfers (Vitor Gomes, Nick Craig-Wood, Manoj
        Ghosh, Edwin Mackenzie-Owen)
        -   Multi-thread transfers are now available when transferring
            to:
            -   local, s3, azureblob, b2, oracleobjectstorage and smb
        -   This greatly improves transfer speed between two network
            sources.
        -   In memory buffering has been unified between all backends
            and should share memory better.
        -   See --multi-thread docs for more info
-   New commands
    -   rclone config redacted support mechanism for showing redacted
        config (Nick Craig-Wood)
-   New Features
    -   accounting
        -   Show server side stats in own lines and not as bytes
            transferred (Nick Craig-Wood)
    -   bisync
        -   Add new --ignore-listing-checksum flag to distinguish from
            --ignore-checksum (nielash)
        -   Add experimental --resilient mode to allow recovery from
            self-correctable errors (nielash)
        -   Add support for --create-empty-src-dirs (nielash)
        -   Dry runs no longer commit filter changes (nielash)
        -   Enforce --check-access during --resync (nielash)
        -   Apply filters correctly during deletes (nielash)
        -   Equality check before renaming (leave identical files alone)
            (nielash)
        -   Fix dryRun rc parameter being ignored (nielash)
    -   build
        -   Update to go1.21 and make go1.19 the minimum required
            version (Anagh Kumar Baranwal, Nick Craig-Wood)
        -   Update dependencies (Nick Craig-Wood)
        -   Add snap installation (hideo aoyama)
        -   Change Winget Releaser job to ubuntu-latest (sitiom)
    -   cmd: Refactor and use sysdnotify in more commands (eNV25)
    -   config: Add --multi-thread-chunk-size flag (Vitor Gomes)
    -   doc updates (antoinetran, Benjamin, Bjørn Smith, Dean Attali,
        gabriel-suela, James Braza, Justin Hellings, kapitainsky, Mahad,
        Masamune3210, Nick Craig-Wood, Nihaal Sangha, Niklas Hambüchen,
        Raymond Berger, r-ricci, Sawada Tsunayoshi, Tiago Boeing,
        Vladislav Vorobev)
    -   fs
        -   Use atomic types everywhere (Roberto Ricci)
        -   When --max-transfer limit is reached exit with code (10)
            (kapitainsky)
        -   Add rclone completion powershell - basic implementation only
            (Nick Craig-Wood)
    -   http servers: Allow CORS to be set with --allow-origin flag
        (yuudi)
    -   lib/rest: Remove unnecessary nil check (Eng Zer Jun)
    -   ncdu: Add keybinding to rescan filesystem (eNV25)
    -   rc
        -   Add executeId to job listings (yuudi)
        -   Add core/du to measure local disk usage (Nick Craig-Wood)
        -   Add operations/settier to API (Drew Stinnett)
    -   rclone test info: Add --check-base32768 flag to check can store
        all base32768 characters (Nick Craig-Wood)
    -   rmdirs: Remove directories concurrently controlled by --checkers
        (Nick Craig-Wood)
-   Bug Fixes
    -   accounting: Don't stop calculating average transfer speed until
        the operation is complete (Jacob Hands)
    -   fs: Fix transferTime not being set in JSON logs (Jacob Hands)
    -   fshttp: Fix --bind 0.0.0.0 allowing IPv6 and --bind ::0 allowing
        IPv4 (Nick Craig-Wood)
    -   operations: Fix overlapping check on case insensitive file
        systems (Nick Craig-Wood)
    -   serve dlna: Fix MIME type if backend can't identify it (Nick
        Craig-Wood)
    -   serve ftp: Fix race condition when using the auth proxy (Nick
        Craig-Wood)
    -   serve sftp: Fix hash calculations with --vfs-cache-mode full
        (Nick Craig-Wood)
    -   serve webdav: Fix error: Expecting fs.Object or fs.Directory,
        got nil (Nick Craig-Wood)
    -   sync: Fix lockup with --cutoff-mode=soft and --max-duration
        (Nick Craig-Wood)
-   Mount
    -   fix: Mount parsing for linux (Anagh Kumar Baranwal)
-   VFS
    -   Add --vfs-cache-min-free-space to control minimum free space on
        the disk containing the cache (Nick Craig-Wood)
    -   Added cache cleaner for directories to reduce memory usage
        (Anagh Kumar Baranwal)
    -   Update parent directory modtimes on vfs actions (David Pedersen)
    -   Keep virtual directory status accurate and reduce deadlock
        potential (Anagh Kumar Baranwal)
    -   Make sure struct field is aligned for atomic access (Roberto
        Ricci)
-   Local
    -   Rmdir return an error if the path is not a dir (zjx20)
-   Azure Blob
    -   Implement OpenChunkWriter and multi-thread uploads (Nick
        Craig-Wood)
    -   Fix creation of directory markers (Nick Craig-Wood)
    -   Fix purging with directory markers (Nick Craig-Wood)
-   B2
    -   Implement OpenChunkWriter and multi-thread uploads (Nick
        Craig-Wood)
    -   Fix rclone link when object path contains special characters
        (Alishan Ladhani)
-   Box
    -   Add polling support (David Sze)
    -   Add --box-impersonate to impersonate a user ID (Nick Craig-Wood)
    -   Fix unhelpful decoding of error messages into decimal numbers
        (Nick Craig-Wood)
-   Chunker
    -   Update documentation to mention issue with small files (Ricardo
        D'O. Albanus)
-   Compress
    -   Fix ChangeNotify (Nick Craig-Wood)
-   Drive
    -   Add --drive-fast-list-bug-fix to control ListR bug workaround
        (Nick Craig-Wood)
-   Fichier
    -   Implement DirMove (Nick Craig-Wood)
    -   Fix error code parsing (alexia)
-   FTP
    -   Add socks_proxy support for SOCKS5 proxies (Zach)
    -   Fix 425 "TLS session of data connection not resumed" errors
        (Nick Craig-Wood)
-   Hdfs
    -   Retry "replication in progress" errors when uploading (Nick
        Craig-Wood)
    -   Fix uploading to the wrong object on Update with overridden
        remote name (Nick Craig-Wood)
-   HTTP
    -   CORS should not be sent if not set (yuudi)
    -   Fix webdav OPTIONS response (yuudi)
-   Opendrive
    -   Fix List on a just deleted and remade directory (Nick
        Craig-Wood)
-   Oracleobjectstorage
    -   Use rclone's rate limiter in multipart transfers (Manoj Ghosh)
    -   Implement OpenChunkWriter and multi-thread uploads (Manoj Ghosh)
-   S3
    -   Refactor multipart upload to use OpenChunkWriter and ChunkWriter
        (Vitor Gomes)
    -   Factor generic multipart upload into lib/multipart (Nick
        Craig-Wood)
    -   Fix purging of root directory with --s3-directory-markers (Nick
        Craig-Wood)
    -   Add rclone backend set command to update the running config
        (Nick Craig-Wood)
    -   Add rclone backend restore-status command (Nick Craig-Wood)
-   SFTP
    -   Stop uploads re-using the same ssh connection to improve
        performance (Nick Craig-Wood)
    -   Add --sftp-ssh to specify an external ssh binary to use (Nick
        Craig-Wood)
    -   Add socks_proxy support for SOCKS5 proxies (Zach)
    -   Support dynamic --sftp-path-override (nielash)
    -   Fix spurious warning when using --sftp-ssh (Nick Craig-Wood)
-   Smb
    -   Implement multi-threaded writes for copies to smb (Edwin
        Mackenzie-Owen)
-   Storj
    -   Performance improvement for large file uploads (Kaloyan Raev)
-   Swift
    -   Fix HEADing 0-length objects when --swift-no-large-objects set
        (Julian Lepinski)
-   Union
    -   Add :writback to act as a simple cache (Nick Craig-Wood)
-   WebDAV
    -   Nextcloud: fix segment violation in low-level retry (Paul)
-   Zoho
    -   Remove Range requests workarounds to fix integration tests (Nick
        Craig-Wood)

v1.63.1 - 2023-07-17

See commits

-   Bug Fixes
    -   build: Fix macos builds for versions < 12 (Anagh Kumar Baranwal)
    -   dirtree: Fix performance with large directories of directories
        and --fast-list (Nick Craig-Wood)
    -   operations
        -   Fix deadlock when using lsd/ls with --progress (Nick
            Craig-Wood)
        -   Fix .rclonelink files not being converted back to symlinks
            (Nick Craig-Wood)
    -   doc fixes (Dean Attali, Mahad, Nick Craig-Wood, Sawada
        Tsunayoshi, Vladislav Vorobev)
-   Local
    -   Fix partial directory read for corrupted filesystem (Nick
        Craig-Wood)
-   Box
    -   Fix reconnect failing with HTTP 400 Bad Request (albertony)
-   Smb
    -   Fix "Statfs failed: bucket or container name is needed" when
        mounting (Nick Craig-Wood)
-   WebDAV
    -   Nextcloud: fix must use /dav/files/USER endpoint not /webdav
        error (Paul)
    -   Nextcloud chunking: add more guidance for the user to check the
        config (darix)

v1.63.0 - 2023-06-30

See commits

-   New backends
    -   Pikpak (wiserain)
    -   New S3 providers
        -   petabox.io (Andrei Smirnov)
        -   Google Cloud Storage (Anthony Pessy)
    -   New WebDAV providers
        -   Fastmail (Arnavion)
-   Major changes
    -   Files will be copied to a temporary name ending in .partial when
        copying to local,ftp,sftp then renamed at the end of the
        transfer. (Janne Hellsten, Nick Craig-Wood)
        -   This helps with data integrity as we don't delete the
            existing file until the new one is complete.
        -   It can be disabled with the --inplace flag.
        -   This behaviour will also happen if the backend is wrapped,
            for example sftp wrapped with crypt.
    -   The s3, azureblob and gcs backends now support directory markers
        so empty directories are supported (Jānis Bebrītis, Nick
        Craig-Wood)
    -   The --default-time flag now controls the unknown modification
        time of files/dirs (Nick Craig-Wood)
        -   If a file or directory does not have a modification time
            rclone can read then rclone will display this fixed time
            instead.
        -   For the old behaviour use --default-time 0s which will set
            this time to the time rclone started up.
-   New Features
    -   build
        -   Modernise linters in use and fixup all affected code
            (albertony)
        -   Push docker beta to GHCR (GitHub container registry)
            (Richard Tweed)
    -   cat: Add --separator option to cat command (Loren Gordon)
    -   config
        -   Do not remove/overwrite other files during config file save
            (albertony)
        -   Do not overwrite config file symbolic link (albertony)
        -   Stop config create making invalid config files (Nick
            Craig-Wood)
    -   doc updates (Adam K, Aditya Basu, albertony, asdffdsazqqq, Damo,
        danielkrajnik, Dimitri Papadopoulos, dlitster, Drew Parsons,
        jumbi77, kapitainsky, mac-15, Mariusz Suchodolski, Nick
        Craig-Wood, NickIAm, Rintze Zelle, Stanislav Gromov, Tareq
        Sharafy, URenko, yuudi, Zach Kipp)
    -   fs
        -   Add size to JSON logs when moving or copying an object (Nick
            Craig-Wood)
        -   Allow boolean features to be enabled with --disable !Feature
            (Nick Craig-Wood)
    -   genautocomplete: Rename to completion with alias to the old name
        (Nick Craig-Wood)
    -   librclone: Added example on using librclone with Go (alankrit)
    -   lsjson: Make --stat more efficient (Nick Craig-Wood)
    -   operations
        -   Implement --multi-thread-write-buffer-size for speed
            improvements on downloads (Paulo Schreiner)
        -   Reopen downloads on error when using check --download and
            cat (Nick Craig-Wood)
    -   rc: config/listremotes includes remotes defined with environment
        variables (kapitainsky)
    -   selfupdate: Obey --no-check-certificate flag (Nick Craig-Wood)
    -   serve restic: Trigger systemd notify (Shyim)
    -   serve webdav: Implement owncloud checksum and modtime extensions
        (WeidiDeng)
    -   sync: --suffix-keep-extension preserve 2 part extensions like
        .tar.gz (Nick Craig-Wood)
-   Bug Fixes
    -   accounting
        -   Fix Prometheus metrics to be the same as core/stats (Nick
            Craig-Wood)
        -   Bwlimit signal handler should always start (Sam Lai)
    -   bisync: Fix maxDelete parameter being ignored via the rc (Nick
        Craig-Wood)
    -   cmd/ncdu: Fix screen corruption when logging (eNV25)
    -   filter: Fix deadlock with errors on --files-from (douchen)
    -   fs
        -   Fix interaction between --progress and --interactive (Nick
            Craig-Wood)
        -   Fix infinite recursive call in pacer ModifyCalculator (fixes
            issue reported by the staticcheck linter) (albertony)
    -   lib/atexit: Ensure OnError only calls cancel function once (Nick
        Craig-Wood)
    -   lib/rest: Fix problems re-using HTTP connections (Nick
        Craig-Wood)
    -   rc
        -   Fix operations/stat with trailing / (Nick Craig-Wood)
        -   Fix missing --rc flags (Nick Craig-Wood)
        -   Fix output of Time values in options/get (Nick Craig-Wood)
    -   serve dlna: Fix potential data race (Nick Craig-Wood)
    -   version: Fix reported os/kernel version for windows (albertony)
-   Mount
    -   Add --mount-case-insensitive to force the mount to be case
        insensitive (Nick Craig-Wood)
    -   Removed unnecessary byte slice allocation for reads (Anagh Kumar
        Baranwal)
    -   Clarify rclone mount error when installed via homebrew (Nick
        Craig-Wood)
    -   Added _netdev to the example mount so it gets treated as a
        remote-fs rather than local-fs (Anagh Kumar Baranwal)
-   Mount2
    -   Updated go-fuse version (Anagh Kumar Baranwal)
    -   Fixed statfs (Anagh Kumar Baranwal)
    -   Disable xattrs (Anagh Kumar Baranwal)
-   VFS
    -   Add MkdirAll function to make a directory and all beneath (Nick
        Craig-Wood)
    -   Fix reload: failed to add virtual dir entry: file does not exist
        (Nick Craig-Wood)
    -   Fix writing to a read only directory creating spurious directory
        entries (WeidiDeng)
    -   Fix potential data race (Nick Craig-Wood)
    -   Fix backends being Shutdown too early when startup takes a long
        time (Nick Craig-Wood)
-   Local
    -   Fix filtering of symlinks with -l/--links flag (Nick Craig-Wood)
    -   Fix /path/to/file.rclonelink when -l/--links is in use (Nick
        Craig-Wood)
    -   Fix crash with --metadata on Android (Nick Craig-Wood)
-   Cache
    -   Fix backends shutting down when in use when used via the rc
        (Nick Craig-Wood)
-   Crypt
    -   Add --crypt-suffix option to set a custom suffix for encrypted
        files (jladbrook)
    -   Add --crypt-pass-bad-blocks to allow corrupted file output (Nick
        Craig-Wood)
    -   Fix reading 0 length files (Nick Craig-Wood)
    -   Try not to return "unexpected EOF" error (Nick Craig-Wood)
    -   Reduce allocations (albertony)
    -   Recommend Dropbox for base32768 encoding (Nick Craig-Wood)
-   Azure Blob
    -   Empty directory markers (Nick Craig-Wood)
    -   Support azure workload identities (Tareq Sharafy)
    -   Fix azure blob uploads with multiple bits of metadata (Nick
        Craig-Wood)
    -   Fix azurite compatibility by sending nil tier if set to empty
        string (Roel Arents)
-   Combine
    -   Implement missing methods (Nick Craig-Wood)
    -   Fix goroutine stack overflow on bad object (Nick Craig-Wood)
-   Drive
    -   Add --drive-env-auth to get IAM credentials from runtime (Peter
        Brunner)
    -   Update drive service account guide (Juang, Yi-Lin)
    -   Fix change notify picking up files outside the root (Nick
        Craig-Wood)
    -   Fix trailing slash mis-identification of folder as file (Nick
        Craig-Wood)
    -   Fix incorrect remote after Update on object (Nick Craig-Wood)
-   Dropbox
    -   Implement --dropbox-pacer-min-sleep flag (Nick Craig-Wood)
    -   Fix the dropbox batcher stalling (Misty)
-   Fichier
    -   Add --ficicher-cdn option to use the CDN for download (Nick
        Craig-Wood)
-   FTP
    -   Lower log message priority when SetModTime is not supported to
        debug (Tobias Gion)
    -   Fix "unsupported LIST line" errors on startup (Nick Craig-Wood)
    -   Fix "501 Not a valid pathname." errors when creating directories
        (Nick Craig-Wood)
-   Google Cloud Storage
    -   Empty directory markers (Jānis Bebrītis, Nick Craig-Wood)
    -   Added --gcs-user-project needed for requester pays (Christopher
        Merry)
-   HTTP
    -   Add client certificate user auth middleware. This can auth
        serve restic from the username in the client cert. (Peter Fern)
-   Jottacloud
    -   Fix vfs writeback stuck in a failed upload loop with file
        versioning disabled (albertony)
-   Onedrive
    -   Add --onedrive-av-override flag to download files flagged as
        virus (Nick Craig-Wood)
    -   Fix quickxorhash on 32 bit architectures (Nick Craig-Wood)
    -   Report any list errors during rclone cleanup (albertony)
-   Putio
    -   Fix uploading to the wrong object on Update with overridden
        remote name (Nick Craig-Wood)
    -   Fix modification times not being preserved for server side copy
        and move (Nick Craig-Wood)
    -   Fix server side copy failures (400 errors) (Nick Craig-Wood)
-   S3
    -   Empty directory markers (Jānis Bebrītis, Nick Craig-Wood)
    -   Update Scaleway storage classes (Brian Starkey)
    -   Fix --s3-versions on individual objects (Nick Craig-Wood)
    -   Fix hang on aborting multipart upload with iDrive e2 (Nick
        Craig-Wood)
    -   Fix missing "tier" metadata (Nick Craig-Wood)
    -   Fix V3sign: add missing subresource delete (cc)
    -   Fix Arvancloud Domain and region changes and alphabetise the
        provider (Ehsan Tadayon)
    -   Fix Qiniu KODO quirks virtualHostStyle is false (zzq)
-   SFTP
    -   Add --sftp-host-key-algorithms to allow specifying SSH host key
        algorithms (Joel)
    -   Fix using --sftp-key-use-agent and --sftp-key-file together
        needing private key file (Arnav Singh)
    -   Fix move to allow overwriting existing files (Nick Craig-Wood)
    -   Don't stat directories before listing them (Nick Craig-Wood)
    -   Don't check remote points to a file if it ends with / (Nick
        Craig-Wood)
-   Sharefile
    -   Disable streamed transfers as they no longer work (Nick
        Craig-Wood)
-   Smb
    -   Code cleanup to avoid overwriting ctx before first use (fixes
        issue reported by the staticcheck linter) (albertony)
-   Storj
    -   Fix "uplink: too many requests" errors when uploading to the
        same file (Nick Craig-Wood)
    -   Fix uploading to the wrong object on Update with overridden
        remote name (Nick Craig-Wood)
-   Swift
    -   Ignore 404 error when deleting an object (Nick Craig-Wood)
-   Union
    -   Implement missing methods (Nick Craig-Wood)
    -   Allow errors to be unwrapped for inspection (Nick Craig-Wood)
-   Uptobox
    -   Add --uptobox-private flag to make all uploaded files private
        (Nick Craig-Wood)
    -   Fix improper regex (Aaron Gokaslan)
    -   Fix Update returning the wrong object (Nick Craig-Wood)
    -   Fix rmdir declaring that directories weren't empty (Nick
        Craig-Wood)
-   WebDAV
    -   nextcloud: Add support for chunked uploads (Paul)
    -   Set modtime using propset for owncloud and nextcloud (WeidiDeng)
    -   Make pacer minSleep configurable with --webdav-pacer-min-sleep
        (ed)
    -   Fix server side copy/move not overwriting (WeidiDeng)
    -   Fix modtime on server side copy for owncloud and nextcloud (Nick
        Craig-Wood)
-   Yandex
    -   Fix 400 Bad Request on transfer failure (Nick Craig-Wood)
-   Zoho
    -   Fix downloads with Range: header returning the wrong data (Nick
        Craig-Wood)

v1.62.2 - 2023-03-16

See commits

-   Bug Fixes
    -   docker volume plugin: Add missing fuse3 dependency (Nick
        Craig-Wood)
    -   docs: Fix size documentation (asdffdsazqqq)
-   FTP
    -   Fix 426 errors on downloads with vsftpd (Lesmiscore)

v1.62.1 - 2023-03-15

See commits

-   Bug Fixes
    -   docker: Add missing fuse3 dependency (cycneuramus)
    -   build: Update release docs to be more careful with the tag (Nick
        Craig-Wood)
    -   build: Set Github release to draft while uploading binaries
        (Nick Craig-Wood)

v1.62.0 - 2023-03-14

See commits

-   New Features
    -   accounting: Make checkers show what they are doing (Nick
        Craig-Wood)
    -   authorize: Add support for custom templates (Hunter Wittenborn)
    -   build
        -   Update to go1.20 (Nick Craig-Wood, Anagh Kumar Baranwal)
        -   Add winget releaser workflow (Ryan Caezar Itang)
        -   Add dependabot (Ryan Caezar Itang)
    -   doc updates (albertony, Bryan Kaplan, Gerard Bosch,
        IMTheNachoMan, Justin Winokur, Manoj Ghosh, Nick Craig-Wood, Ole
        Frost, Peter Brunner, piyushgarg, Ryan Caezar Itang, Simmon Li,
        ToBeFree)
    -   filter: Emit INFO message when can't work out directory filters
        (Nick Craig-Wood)
    -   fs
        -   Added multiple ca certificate support. (alankrit)
        -   Add --max-delete-size a delete size threshold (Leandro
            Sacchet)
    -   fspath: Allow the symbols @ and + in remote names (albertony)
    -   lib/terminal: Enable windows console virtual terminal sequences
        processing (ANSI/VT100 colors) (albertony)
    -   move: If --check-first and --order-by are set then delete with
        perfect ordering (Nick Craig-Wood)
    -   serve http: Support --auth-proxy (Matthias Baur)
-   Bug Fixes
    -   accounting
        -   Avoid negative ETA values for very slow speeds (albertony)
        -   Limit length of ETA string (albertony)
        -   Show human readable elapsed time when longer than a day
            (albertony)
    -   all: Apply codeql fixes (Aaron Gokaslan)
    -   build
        -   Fix condition for manual workflow run (albertony)
        -   Fix building for ARMv5 and ARMv6 (albertony)
            -   selfupdate: Consider ARM version
            -   install.sh: fix ARMv6 download
            -   version: Report ARM version
    -   deletefile: Return error code 4 if file does not exist (Nick
        Craig-Wood)
    -   docker: Fix volume plugin does not remount volume on docker
        restart (logopk)
    -   fs: Fix race conditions in --max-delete and --max-delete-size
        (Nick Craig-Wood)
    -   lib/oauthutil: Handle fatal errors better (Alex Chen)
    -   mount2: Fix --allow-non-empty (Nick Craig-Wood)
    -   operations: Fix concurrency: use --checkers unless transferring
        files (Nick Craig-Wood)
    -   serve ftp: Fix timestamps older than 1 year in listings (Nick
        Craig-Wood)
    -   sync: Fix concurrency: use --checkers unless transferring files
        (Nick Craig-Wood)
    -   tree
        -   Fix nil pointer exception on stat failure (Nick Craig-Wood)
        -   Fix colored output on windows (albertony)
        -   Fix display of files with illegal Windows file system names
            (Nick Craig-Wood)
-   Mount
    -   Fix creating and renaming files on case insensitive backends
        (Nick Craig-Wood)
    -   Do not treat \\?\ prefixed paths as network share paths on
        windows (albertony)
    -   Fix check for empty mount point on Linux (Nick Craig-Wood)
    -   Fix --allow-non-empty (Nick Craig-Wood)
    -   Avoid incorrect or premature overlap check on windows
        (albertony)
    -   Update to fuse3 after bazil.org/fuse update (Nick Craig-Wood)
-   VFS
    -   Make uploaded files retain modtime with non-modtime backends
        (Nick Craig-Wood)
    -   Fix incorrect modtime on fs which don't support setting modtime
        (Nick Craig-Wood)
    -   Fix rename of directory containing files to be uploaded (Nick
        Craig-Wood)
-   Local
    -   Fix %!w(<nil>) in "failed to read directory" error (Marks
        Polakovs)
    -   Fix exclusion of dangling symlinks with -L/--copy-links (Nick
        Craig-Wood)
-   Crypt
    -   Obey --ignore-checksum (Nick Craig-Wood)
    -   Fix for unencrypted directory names on case insensitive remotes
        (Ole Frost)
-   Azure Blob
    -   Remove workarounds for SDK bugs after v0.6.1 update (Nick
        Craig-Wood)
-   B2
    -   Fix uploading files bigger than 1TiB (Nick Craig-Wood)
-   Drive
    -   Note that --drive-acknowledge-abuse needs SA Manager permission
        (Nick Craig-Wood)
    -   Make --drive-stop-on-upload-limit to respond to
        storageQuotaExceeded (Ninh Pham)
-   FTP
    -   Retry 426 errors (Nick Craig-Wood)
    -   Retry errors when initiating downloads (Nick Craig-Wood)
    -   Revert to upstream github.com/jlaffaye/ftp now fix is merged
        (Nick Craig-Wood)
-   Google Cloud Storage
    -   Add --gcs-env-auth to pick up IAM credentials from env/instance
        (Peter Brunner)
-   Mega
    -   Add --mega-use-https flag (NodudeWasTaken)
-   Onedrive
    -   Default onedrive personal to QuickXorHash as Microsoft is
        removing SHA1 (Nick Craig-Wood)
    -   Add --onedrive-hash-type to change the hash in use (Nick
        Craig-Wood)
    -   Improve speed of QuickXorHash (LXY)
-   Oracle Object Storage
    -   Speed up operations by using S3 pacer and setting minsleep to
        10ms (Manoj Ghosh)
    -   Expose the storage_tier option in config (Manoj Ghosh)
    -   Bring your own encryption keys (Manoj Ghosh)
-   S3
    -   Check multipart upload ETag when --s3-no-head is in use (Nick
        Craig-Wood)
    -   Add --s3-sts-endpoint to specify STS endpoint (Nick Craig-Wood)
    -   Fix incorrect tier support for StorJ and IDrive when pointing at
        a file (Ole Frost)
    -   Fix AWS STS failing if --s3-endpoint is set (Nick Craig-Wood)
    -   Make purge remove directory markers too (Nick Craig-Wood)
-   Seafile
    -   Renew library password (Fred)
-   SFTP
    -   Fix uploads being 65% slower than they should be with crypt
        (Nick Craig-Wood)
-   Smb
    -   Allow SPN (service principal name) to be configured (Nick
        Craig-Wood)
    -   Check smb connection is closed (happyxhw)
-   Storj
    -   Implement rclone link (Kaloyan Raev)
    -   Implement rclone purge (Kaloyan Raev)
    -   Update satellite urls and labels (Kaloyan Raev)
-   WebDAV
    -   Fix interop with davrods server (Nick Craig-Wood)

v1.61.1 - 2022-12-23

See commits

-   Bug Fixes
    -   docs:
        -   Show only significant parts of version number in version
            introduced label (albertony)
        -   Fix unescaped HTML (Nick Craig-Wood)
    -   lib/http: Shutdown all servers on exit to remove unix socket
        (Nick Craig-Wood)
    -   rc: Fix --rc-addr flag (which is an alternate for --url) (Anagh
        Kumar Baranwal)
    -   serve restic
        -   Don't serve via http if serving via --stdio (Nick
            Craig-Wood)
        -   Fix immediate exit when not using stdio (Nick Craig-Wood)
    -   serve webdav
        -   Fix --baseurl handling after lib/http refactor (Nick
            Craig-Wood)
        -   Fix running duplicate Serve call (Nick Craig-Wood)
-   Azure Blob
    -   Fix "409 Public access is not permitted on this storage account"
        (Nick Craig-Wood)
-   S3
    -   storj: Update endpoints (Kaloyan Raev)

v1.61.0 - 2022-12-20

See commits

-   New backends
    -   New S3 providers
        -   Liara LOS (MohammadReza)
-   New Features
    -   build: Add vulnerability testing using govulncheck (albertony)
    -   cmd: Enable SIGINFO (Ctrl-T) handler on FreeBSD, NetBSD, OpenBSD
        and Dragonfly BSD (x3-apptech)
    -   config: Add config/setpath for setting config path via
        rc/librclone (Nick Craig-Wood)
    -   dedupe
        -   Count Checks in the stats while scanning for duplicates
            (Nick Craig-Wood)
        -   Make dedupe obey the filters (Nick Craig-Wood)
    -   dlna: Properly attribute code used from
        https://github.com/anacrolix/dms (Nick Craig-Wood)
    -   docs
        -   Add minimum versions and status badges to backend and
            command docs (Nick Craig-Wood, albertony)
        -   Remote names may not start or end with space (albertony)
    -   filter: Add metadata filters --metadata-include/exclude/filter
        and friends (Nick Craig-Wood)
    -   fs
        -   Make all duration flags take y, M, w, d etc suffixes (Nick
            Craig-Wood)
        -   Add global flag --color to control terminal colors (Kevin
            Verstaen)
    -   fspath: Allow unicode numbers and letters in remote names
        (albertony)
    -   lib/file: Improve error message for creating dir on non-existent
        network host on windows (albertony)
    -   lib/http: Finish port of rclone servers to lib/http (Tom
        Mombourquette, Nick Craig-Wood)
    -   lib/oauthutil: Improved usability of config flows needing web
        browser (Ole Frost)
    -   ncdu
        -   Add support for modification time (albertony)
        -   Fallback to sort by name also for sort by average size
            (albertony)
        -   Rework to use tcell directly instead of the termbox wrapper
            (eNV25)
    -   rc: Add commands to set GC Percent & Memory Limit (go 1.19+)
        (Anagh Kumar Baranwal)
    -   rcat: Preserve metadata when Copy falls back to Rcat (Nick
        Craig-Wood)
    -   rcd: Refactor rclone rc server to use lib/http (Nick Craig-Wood)
    -   rcserver: Avoid generating default credentials with htpasswd
        (Kamui)
    -   restic: Refactor to use lib/http (Nolan Woods)
    -   serve http: Support unix sockets and multiple listeners (Tom
        Mombourquette)
    -   serve webdav: Refactor to use lib/http (Nick Craig-Wood)
    -   test: Replace defer cleanup with t.Cleanup (Eng Zer Jun)
    -   test memory: Read metadata if -M flag is specified (Nick
        Craig-Wood)
    -   wasm: Comply with wasm_exec.js licence terms (Matthew Vernon)
-   Bug Fixes
    -   build: Update golang.org/x/net/http2 to fix GO-2022-1144 (Nick
        Craig-Wood)
    -   restic: Fix typo in docs 'remove' should be 'remote'
        (asdffdsazqqq)
    -   serve dlna: Fix panic: Logger uninitialized. (Nick Craig-Wood)
-   Mount
    -   Update cgofuse for FUSE-T support for mounting volumes on Mac
        (Nick Craig-Wood)
-   VFS
    -   Windows: fix slow opening of exe files by not truncating files
        when not necessary (Nick Craig-Wood)
    -   Fix IO Error opening a file with O_CREATE|O_RDONLY in
        --vfs-cache-mode not full (Nick Craig-Wood)
-   Crypt
    -   Fix compress wrapping crypt giving upload errors (Nick
        Craig-Wood)
-   Azure Blob
    -   Port to new SDK (Nick Craig-Wood)
        -   Revamp authentication to include all methods and docs (Nick
            Craig-Wood)
        -   Port old authentication methods to new SDK (Nick Craig-Wood,
            Brad Ackerman)
        -   Thanks to Stonebranch for sponsoring this work.
    -   Add --azureblob-no-check-container to assume container exists
        (Nick Craig-Wood)
    -   Add --use-server-modtime support (Abdullah Saglam)
    -   Add support for custom upload headers (rkettelerij)
    -   Allow emulator account/key override (Roel Arents)
    -   Support simple "environment credentials" (Nathaniel Wesley
        Filardo)
    -   Ignore AuthorizationFailure when trying to create a create a
        container (Nick Craig-Wood)
-   Box
    -   Added note on Box API rate limits (Ole Frost)
-   Drive
    -   Handle shared drives with leading/trailing space in name
        (related to) (albertony)
-   FTP
    -   Update help text of implicit/explicit TLS options to refer to
        FTPS instead of FTP (ycdtosa)
    -   Improve performance to speed up --files-from and NewObject
        (Anthony Pessy)
-   HTTP
    -   Parse GET responses when no_head is set (Arnie97)
    -   Do not update object size based on Range requests (Arnie97)
    -   Support Content-Range response header (Arnie97)
-   Onedrive
    -   Document workaround for shared with me files (vanplus)
-   S3
    -   Add Liara LOS to provider list (MohammadReza)
    -   Add DigitalOcean Spaces regions sfo3, fra1, syd1 (Jack)
    -   Avoid privileged GetBucketLocation to resolve s3 region (Anthony
        Pessy)
    -   Stop setting object and bucket ACL to private if it is an empty
        string (Philip Harvey)
    -   If bucket or object ACL is empty string then don't add
        X-Amz-Acl: header (Nick Craig-Wood)
    -   Reduce memory consumption for s3 objects (Erik Agterdenbos)
    -   Fix listing loop when using v2 listing on v1 server (Nick
        Craig-Wood)
    -   Fix nil pointer exception when using Versions (Nick Craig-Wood)
    -   Fix excess memory usage when using versions (Nick Craig-Wood)
    -   Ignore versionIDs from uploads unless using --s3-versions or
        --s3-versions-at (Nick Craig-Wood)
-   SFTP
    -   Add configuration options to set ssh Ciphers / MACs /
        KeyExchange (dgouju)
    -   Auto-detect shell type for fish (albertony)
    -   Fix NewObject with leading / (Nick Craig-Wood)
-   Smb
    -   Fix issue where spurious dot directory is created (albertony)
-   Storj
    -   Implement server side Copy (Kaloyan Raev)

v1.60.1 - 2022-11-17

See commits

-   Bug Fixes
    -   lib/cache: Fix alias backend shutting down too soon (Nick
        Craig-Wood)
    -   wasm: Fix walltime link error by adding up-to-date wasm_exec.js
        (João Henrique Franco)
    -   docs
        -   Update faq.md with bisync (Samuel Johnson)
        -   Corrected download links in windows install docs
            (coultonluke)
        -   Add direct download link for windows arm64 (albertony)
        -   Remove link to rclone slack as it is no longer supported
            (Nick Craig-Wood)
        -   Faq: how to use a proxy server that requires a username and
            password (asdffdsazqqq)
        -   Oracle-object-storage: doc fix (Manoj Ghosh)
        -   Fix typo remove in rclone_serve_restic command (Joda Stößer)
        -   Fix character that was incorrectly interpreted as markdown
            (Clément Notin)
-   VFS
    -   Fix deadlock caused by cache cleaner and upload finishing (Nick
        Craig-Wood)
-   Local
    -   Clean absolute paths (albertony)
    -   Fix -L/--copy-links with filters missing directories (Nick
        Craig-Wood)
-   Mailru
    -   Note that an app password is now needed (Nick Craig-Wood)
    -   Allow timestamps to be before the epoch 1970-01-01 (Nick
        Craig-Wood)
-   S3
    -   Add provider quirk --s3-might-gzip to fix corrupted on transfer:
        sizes differ (Nick Craig-Wood)
    -   Allow Storj to server side copy since it seems to work now (Nick
        Craig-Wood)
    -   Fix for unchecked err value in s3 listv2 (Aaron Gokaslan)
    -   Add additional Wasabi locations (techknowlogick)
-   Smb
    -   Fix Failed to sync: context canceled at the end of syncs (Nick
        Craig-Wood)
-   WebDAV
    -   Fix Move/Copy/DirMove when using -server-side-across-configs
        (Nick Craig-Wood)

v1.60.0 - 2022-10-21

See commits

-   New backends
    -   Oracle object storage (Manoj Ghosh)
    -   SMB / CIFS (Windows file sharing) (Lesmiscore)
    -   New S3 providers
        -   IONOS Cloud Storage (Dmitry Deniskin)
        -   Qiniu KODO (Bachue Zhou)
-   New Features
    -   build
        -   Update to go1.19 and make go1.17 the minimum required
            version (Nick Craig-Wood)
        -   Install.sh: fix arm-v7 download (Ole Frost)
    -   fs: Warn the user when using an existing remote name without a
        colon (Nick Craig-Wood)
    -   httplib: Add --xxx-min-tls-version option to select minimum TLS
        version for HTTP servers (Robert Newson)
    -   librclone: Add PHP bindings and test program (Jordi Gonzalez
        Muñoz)
    -   operations
        -   Add --server-side-across-configs global flag for any backend
            (Nick Craig-Wood)
        -   Optimise --copy-dest and --compare-dest (Nick Craig-Wood)
    -   rc: add job/stopgroup to stop group (Evan Spensley)
    -   serve dlna
        -   Add --announce-interval to control SSDP Announce Interval
            (YanceyChiew)
        -   Add --interface to Specify SSDP interface names line (Simon
            Bos)
        -   Add support for more external subtitles (YanceyChiew)
        -   Add verification of addresses (YanceyChiew)
    -   sync: Optimise --copy-dest and --compare-dest (Nick Craig-Wood)
    -   doc updates (albertony, Alexander Knorr, anonion, João Henrique
        Franco, Josh Soref, Lorenzo Milesi, Marco Molteni, Mark Trolley,
        Ole Frost, partev, Ryan Morey, Tom Mombourquette, YFdyh000)
-   Bug Fixes
    -   filter
        -   Fix incorrect filtering with UseFilter context flag and
            wrapping backends (Nick Craig-Wood)
        -   Make sure we check --files-from when looking for a single
            file (Nick Craig-Wood)
    -   rc
        -   Fix mount/listmounts not returning the full Fs entered in
            mount/mount (Tom Mombourquette)
        -   Handle external unmount when mounting (Isaac Aymerich)
        -   Validate Daemon option is not set when mounting a volume via
            RC (Isaac Aymerich)
    -   sync: Update docs and error messages to reflect fixes to overlap
        checks (Nick Naumann)
-   VFS
    -   Reduce memory use by embedding sync.Cond (Nick Craig-Wood)
    -   Reduce memory usage by re-ordering commonly used structures
        (Nick Craig-Wood)
    -   Fix excess CPU used by VFS cache cleaner looping (Nick
        Craig-Wood)
-   Local
    -   Obey file filters in listing to fix errors on excluded files
        (Nick Craig-Wood)
    -   Fix "Failed to read metadata: function not implemented" on old
        Linux kernels (Nick Craig-Wood)
-   Compress
    -   Fix crash due to nil metadata (Nick Craig-Wood)
    -   Fix error handling to not use or return nil objects (Nick
        Craig-Wood)
-   Drive
    -   Make --drive-stop-on-upload-limit obey quota exceeded error
        (Steve Kowalik)
-   FTP
    -   Add --ftp-force-list-hidden option to show hidden items (Øyvind
        Heddeland Instefjord)
    -   Fix hang when using ExplicitTLS to certain servers. (Nick
        Craig-Wood)
-   Google Cloud Storage
    -   Add --gcs-endpoint flag and config parameter (Nick Craig-Wood)
-   Hubic
    -   Remove backend as service has now shut down (Nick Craig-Wood)
-   Onedrive
    -   Rename Onedrive(cn) 21Vianet to Vnet Group (Yen Hu)
    -   Disable change notify in China region since it is not supported
        (Nick Craig-Wood)
-   S3
    -   Implement --s3-versions flag to show old versions of objects if
        enabled (Nick Craig-Wood)
    -   Implement --s3-version-at flag to show versions of objects at a
        particular time (Nick Craig-Wood)
    -   Implement backend versioning command to get/set bucket
        versioning (Nick Craig-Wood)
    -   Implement Purge to purge versions and backend cleanup-hidden
        (Nick Craig-Wood)
    -   Add --s3-decompress flag to decompress gzip-encoded files (Nick
        Craig-Wood)
    -   Add --s3-sse-customer-key-base64 to supply keys with binary data
        (Richard Bateman)
    -   Try to keep the maximum precision in ModTime with
        --user-server-modtime (Nick Craig-Wood)
    -   Drop binary metadata with an ERROR message as it can't be stored
        (Nick Craig-Wood)
    -   Add --s3-no-system-metadata to suppress read and write of system
        metadata (Nick Craig-Wood)
-   SFTP
    -   Fix directory creation races (Lesmiscore)
-   Swift
    -   Add --swift-no-large-objects to reduce HEAD requests (Nick
        Craig-Wood)
-   Union
    -   Propagate SlowHash feature to fix hasher interaction
        (Lesmiscore)

v1.59.2 - 2022-09-15

See commits

-   Bug Fixes
    -   config: Move locking to fix fatal error: concurrent map read and
        map write (Nick Craig-Wood)
-   Local
    -   Disable xattr support if the filesystems indicates it is not
        supported (Nick Craig-Wood)
-   Azure Blob
    -   Fix chunksize calculations producing too many parts (Nick
        Craig-Wood)
-   B2
    -   Fix chunksize calculations producing too many parts (Nick
        Craig-Wood)
-   S3
    -   Fix chunksize calculations producing too many parts (Nick
        Craig-Wood)

v1.59.1 - 2022-08-08

See commits

-   Bug Fixes
    -   accounting: Fix panic in core/stats-reset with unknown group
        (Nick Craig-Wood)
    -   build: Fix android build after GitHub actions change (Nick
        Craig-Wood)
    -   dlna: Fix SOAP action header parsing (Joram Schrijver)
    -   docs: Fix links to mount command from install docs (albertony)
    -   dropbox: Fix ChangeNotify was unable to decrypt errors (Nick
        Craig-Wood)
    -   fs: Fix parsing of times and durations of the form "YYYY-MM-DD
        HH:MM:SS" (Nick Craig-Wood)
    -   serve sftp: Fix checksum detection (Nick Craig-Wood)
    -   sync: Add accidentally missed filter-sensitivity to --backup-dir
        option (Nick Naumann)
-   Combine
    -   Fix docs showing remote= instead of upstreams= (Nick Craig-Wood)
    -   Throw error if duplicate directory name is specified (Nick
        Craig-Wood)
    -   Fix errors with backends shutting down while in use (Nick
        Craig-Wood)
-   Dropbox
    -   Fix hang on quit with --dropbox-batch-mode off (Nick Craig-Wood)
    -   Fix infinite loop on uploading a corrupted file (Nick
        Craig-Wood)
-   Internetarchive
    -   Ignore checksums for files using the different method
        (Lesmiscore)
    -   Handle hash symbol in the middle of filename (Lesmiscore)
-   Jottacloud
    -   Fix working with whitelabel Elgiganten Cloud
    -   Do not store username in config when using standard auth
        (albertony)
-   Mega
    -   Fix nil pointer exception when bad node received (Nick
        Craig-Wood)
-   S3
    -   Fix --s3-no-head panic: reflect: Elem of invalid type
        s3.PutObjectInput (Nick Craig-Wood)
-   SFTP
    -   Fix issue with WS_FTP by working around failing RealPath
        (albertony)
-   Union
    -   Fix duplicated files when using directories with leading / (Nick
        Craig-Wood)
    -   Fix multiple files being uploaded when roots don't exist (Nick
        Craig-Wood)
    -   Fix panic due to misalignment of struct field in 32 bit
        architectures (r-ricci)

v1.59.0 - 2022-07-09

See commits

-   New backends
    -   Combine multiple remotes in one directory tree (Nick Craig-Wood)
    -   Hidrive (Ovidiu Victor Tatar)
    -   Internet Archive (Lesmiscore (Naoya Ozaki))
    -   New S3 providers
        -   ArvanCloud AOS (ehsantdy)
        -   Cloudflare R2 (Nick Craig-Wood)
        -   Huawei OBS (m00594701)
        -   IDrive e2 (vyloy)
-   New commands
    -   test makefile: Create a single file for testing (Nick
        Craig-Wood)
-   New Features
    -   Metadata framework to read and write system and user metadata on
        backends (Nick Craig-Wood)
        -   Implemented initially for local, s3 and internetarchive
            backends
        -   --metadata/-M flag to control whether metadata is copied
        -   --metadata-set flag to specify metadata for uploads
        -   Thanks to Manz Solutions for sponsoring this work.
    -   build
        -   Update to go1.18 and make go1.16 the minimum required
            version (Nick Craig-Wood)
        -   Update android go build to 1.18.x and NDK to 23.1.7779620
            (Nick Craig-Wood)
        -   All windows binaries now no longer CGO (Nick Craig-Wood)
        -   Add linux/arm/v6 to docker images (Nick Craig-Wood)
        -   A huge number of fixes found with staticcheck (albertony)
        -   Configurable version suffix independent of version number
            (albertony)
    -   check: Implement --no-traverse and --no-unicode-normalization
        (Nick Craig-Wood)
    -   config: Readability improvements (albertony)
    -   copyurl: Add --header-filename to honor the HTTP header filename
        directive (J-P Treen)
    -   filter: Allow multiple --exclude-if-present flags (albertony)
    -   fshttp: Add --disable-http-keep-alives to disable HTTP Keep
        Alives (Nick Craig-Wood)
    -   install.sh
        -   Set the modes on the files and/or directories on macOS
            (Michael C Tiernan - MIT-Research Computing Project)
        -   Pre verify sudo authorization -v before calling curl.
            (Michael C Tiernan - MIT-Research Computing Project)
    -   lib/encoder: Add Semicolon encoding (Nick Craig-Wood)
    -   lsf: Add metadata support with M flag (Nick Craig-Wood)
    -   lsjson: Add --metadata/-M flag (Nick Craig-Wood)
    -   ncdu
        -   Implement multi selection (CrossR)
        -   Replace termbox with tcell's termbox wrapper (eNV25)
        -   Display correct path in delete confirmation dialog (Roberto
            Ricci)
    -   operations
        -   Speed up hash checking by aborting the other hash if first
            returns nothing (Nick Craig-Wood)
        -   Use correct src/dst in some log messages (zzr93)
    -   rcat: Check checksums by default like copy does (Nick
        Craig-Wood)
    -   selfupdate: Replace deprecated x/crypto/openpgp package with
        ProtonMail/go-crypto (albertony)
    -   serve ftp: Check --passive-port arguments are correct (Nick
        Craig-Wood)
    -   size: Warn about inaccurate results when objects with unknown
        size (albertony)
    -   sync: Overlap check is now filter-sensitive so --backup-dir can
        be in the root provided it is filtered (Nick)
    -   test info: Check file name lengths using 1,2,3,4 byte unicode
        characters (Nick Craig-Wood)
    -   test makefile(s): --sparse, --zero, --pattern, --ascii,
        --chargen flags to control file contents (Nick Craig-Wood)
    -   Make sure we call the Shutdown method on backends (Martin
        Czygan)
-   Bug Fixes
    -   accounting: Fix unknown length file transfers counting 3
        transfers each (buda)
    -   ncdu: Fix issue where dir size is summed when file sizes are -1
        (albertony)
    -   sync/copy/move
        -   Fix --fast-list --create-empty-src-dirs and --exclude (Nick
            Craig-Wood)
        -   Fix --max-duration and --cutoff-mode soft (Nick Craig-Wood)
    -   Fix fs cache unpin (Martin Czygan)
    -   Set proper exit code for errors that are not low-level retried
        (e.g. size/timestamp changing) (albertony)
-   Mount
    -   Support windows/arm64 (may still be problems - see #5828) (Nick
        Craig-Wood)
    -   Log IO errors at ERROR level (Nick Craig-Wood)
    -   Ignore _netdev mount argument (Hugal31)
-   VFS
    -   Add --vfs-fast-fingerprint for less accurate but faster
        fingerprints (Nick Craig-Wood)
    -   Add --vfs-disk-space-total-size option to manually set the total
        disk space (Claudio Maradonna)
    -   vfscache: Fix fatal error: sync: unlock of unlocked mutex error
        (Nick Craig-Wood)
-   Local
    -   Fix parsing of --local-nounc flag (Nick Craig-Wood)
    -   Add Metadata support (Nick Craig-Wood)
-   Crypt
    -   Support metadata (Nick Craig-Wood)
-   Azure Blob
    -   Calculate Chunksize/blocksize to stay below maxUploadParts
        (Leroy van Logchem)
    -   Use chunksize lib to determine chunksize dynamically (Derek
        Battams)
    -   Case insensitive access tier (Rob Pickerill)
    -   Allow remote emulator (azurite) (Lorenzo Maiorfi)
-   B2
    -   Add --b2-version-at flag to show file versions at time specified
        (SwazRGB)
    -   Use chunksize lib to determine chunksize dynamically (Derek
        Battams)
-   Chunker
    -   Mark as not supporting metadata (Nick Craig-Wood)
-   Compress
    -   Support metadata (Nick Craig-Wood)
-   Drive
    -   Make backend config -o config add a combined AllDrives: remote
        (Nick Craig-Wood)
    -   Make --drive-shared-with-me work with shared drives (Nick
        Craig-Wood)
    -   Add --drive-resource-key for accessing link-shared files (Nick
        Craig-Wood)
    -   Add backend commands exportformats and importformats for
        debugging (Nick Craig-Wood)
    -   Fix 404 errors on copy/server side copy objects from public
        folder (Nick Craig-Wood)
    -   Update Internal OAuth consent screen docs (Phil Shackleton)
    -   Moved root_folder_id to advanced section (Abhiraj)
-   Dropbox
    -   Migrate from deprecated api (m8rge)
    -   Add logs to show when poll interval limits are exceeded (Nick
        Craig-Wood)
    -   Fix nil pointer exception on dropbox impersonate user not found
        (Nick Craig-Wood)
-   Fichier
    -   Parse api error codes and them accordingly (buengese)
-   FTP
    -   Add support for disable_utf8 option (Jason Zheng)
    -   Revert to upstream github.com/jlaffaye/ftp from our fork (Nick
        Craig-Wood)
-   Google Cloud Storage
    -   Add --gcs-no-check-bucket to minimise transactions and perms
        (Nick Gooding)
    -   Add --gcs-decompress flag to decompress gzip-encoded files (Nick
        Craig-Wood)
        -   by default these will be downloaded compressed (which
            previously failed)
-   Hasher
    -   Support metadata (Nick Craig-Wood)
-   HTTP
    -   Fix missing response when using custom auth handler (albertony)
-   Jottacloud
    -   Add support for upload to custom device and mountpoint
        (albertony)
    -   Always store username in config and use it to avoid initial API
        request (albertony)
    -   Fix issue with server-side copy when destination is in trash
        (albertony)
    -   Fix listing output of remote with special characters (albertony)
-   Mailru
    -   Fix timeout by using int instead of time.Duration for keeping
        number of seconds (albertony)
-   Mega
    -   Document using MEGAcmd to help with login failures (Art M.
        Gallagher)
-   Onedrive
    -   Implement --poll-interval for onedrive (Hugo Laloge)
    -   Add access scopes option (Sven Gerber)
-   Opendrive
    -   Resolve lag and truncate bugs (Scott Grimes)
-   Pcloud
    -   Fix about with no free space left (buengese)
    -   Fix cleanup (buengese)
-   S3
    -   Use PUT Object instead of presigned URLs to upload single part
        objects (Nick Craig-Wood)
    -   Backend restore command to skip non-GLACIER objects (Vincent
        Murphy)
    -   Use chunksize lib to determine chunksize dynamically (Derek
        Battams)
    -   Retry RequestTimeout errors (Nick Craig-Wood)
    -   Implement reading and writing of metadata (Nick Craig-Wood)
-   SFTP
    -   Add support for about and hashsum on windows server (albertony)
    -   Use vendor-specific VFS statistics extension for about if
        available (albertony)
    -   Add --sftp-chunk-size to control packets sizes for high latency
        links (Nick Craig-Wood)
    -   Add --sftp-concurrency to improve high latency transfers (Nick
        Craig-Wood)
    -   Add --sftp-set-env option to set environment variables (Nick
        Craig-Wood)
    -   Add Hetzner Storage Boxes to supported sftp backends (Anthrazz)
-   Storj
    -   Fix put which lead to the file being unreadable when using mount
        (Erik van Velzen)
-   Union
    -   Add min_free_space option for lfs/eplfs policies (Nick
        Craig-Wood)
    -   Fix uploading files to union of all bucket based remotes (Nick
        Craig-Wood)
    -   Fix get free space for remotes which don't support it (Nick
        Craig-Wood)
    -   Fix eplus policy to select correct entry for existing files
        (Nick Craig-Wood)
    -   Support metadata (Nick Craig-Wood)
-   Uptobox
    -   Fix root path handling (buengese)
-   WebDAV
    -   Add SharePoint in other specific regions support (Noah Hsu)
-   Yandex
    -   Handle api error on server-side move (albertony)
-   Zoho
    -   Add Japan and China regions (buengese)

v1.58.1 - 2022-04-29

See commits

-   Bug Fixes
    -   build: Update github.com/billziss-gh to github.com/winfsp (Nick
        Craig-Wood)
    -   filter: Fix timezone of --min-age/-max-age from UTC to local as
        documented (Nick Craig-Wood)
    -   rc/js: Correct RC method names (Sơn Trần-Nguyễn)
    -   docs
        -   Fix some links to command pages (albertony)
        -   Add --multi-thread-streams note to --transfers. (Zsolt Ero)
-   Mount
    -   Fix --devname and fusermount: unknown option 'fsname' when
        mounting via rc (Nick Craig-Wood)
-   VFS
    -   Remove wording which suggests VFS is only for mounting (Nick
        Craig-Wood)
-   Dropbox
    -   Fix retries of multipart uploads with incorrect_offset error
        (Nick Craig-Wood)
-   Google Cloud Storage
    -   Use the s3 pacer to speed up transactions (Nick Craig-Wood)
    -   pacer: Default the Google pacer to a burst of 100 to fix gcs
        pacing (Nick Craig-Wood)
-   Jottacloud
    -   Fix scope in token request (albertony)
-   Netstorage
    -   Fix unescaped HTML in documentation (Nick Craig-Wood)
    -   Make levels of headings consistent (Nick Craig-Wood)
    -   Add support contacts to netstorage doc (Nil Alexandrov)
-   Onedrive
    -   Note that sharepoint also changes web files (.html, .aspx) (GH)
-   Putio
    -   Handle rate limit errors (Berkan Teber)
    -   Fix multithread download and other ranged requests (rafma0)
-   S3
    -   Add ChinaMobile EOS to provider list (GuoXingbin)
    -   Sync providers in config description with providers (Nick
        Craig-Wood)
-   SFTP
    -   Fix OpenSSH 8.8+ RSA keys incompatibility (KARBOWSKI Piotr)
    -   Note that Scaleway C14 is deprecating SFTP in favor of S3
        (Adrien Rey-Jarthon)
-   Storj
    -   Fix bucket creation on Move (Nick Craig-Wood)
-   WebDAV
    -   Don't override Referer if user sets it (Nick Craig-Wood)

v1.58.0 - 2022-03-18

See commits

-   New backends
    -   Akamai Netstorage (Nil Alexandrov)
    -   Seagate Lyve, SeaweedFS, Storj, RackCorp via s3 backend
    -   Storj (renamed from Tardigrade - your old config files will
        continue working)
-   New commands
    -   bisync - experimental bidirectional cloud sync (Ivan Andreev,
        Chris Nelson)
-   New Features
    -   build
        -   Add windows/arm64 build (rclone mount not supported yet)
            (Nick Craig-Wood)
        -   Raise minimum go version to go1.15 (Nick Craig-Wood)
    -   config: Allow dot in remote names and improve config editing
        (albertony)
    -   dedupe: Add quit as a choice in interactive mode (albertony)
    -   dlna: Change icons to the newest ones. (Alain Nussbaumer)
    -   filter: Add {{ regexp }} syntax to pattern matches (Nick
        Craig-Wood)
    -   fshttp: Add prometheus metrics for HTTP status code (Michał
        Matczuk)
    -   hashsum: Support creating hash from data received on stdin
        (albertony)
    -   librclone
        -   Allow empty string or null input instead of empty json
            object (albertony)
        -   Add support for mount commands (albertony)
    -   operations: Add server-side moves to stats (Ole Frost)
    -   rc: Allow user to disable authentication for web gui (negative0)
    -   tree: Remove obsolete --human replaced by global
        --human-readable (albertony)
    -   version: Report correct friendly-name for newer Windows 10/11
        versions (albertony)
-   Bug Fixes
    -   build
        -   Fix ARM architecture version in .deb packages after nfpm
            change (Nick Craig-Wood)
        -   Hard fork github.com/jlaffaye/ftp to fix
            go get github.com/rclone/rclone (Nick Craig-Wood)
    -   oauthutil: Fix crash when webbrowser requests /robots.txt (Nick
        Craig-Wood)
    -   operations: Fix goroutine leak in case of copy retry (Ankur
        Gupta)
    -   rc:
        -   Fix operations/publiclink default for expires parameter
            (Nick Craig-Wood)
        -   Fix missing computation of transferQueueSize when summing up
            statistics group (Carlo Mion)
        -   Fix missing StatsInfo fields in the computation of the group
            sum (Carlo Mion)
    -   sync: Fix --max-duration so it doesn't retry when the duration
        is exceeded (Nick Craig-Wood)
    -   touch: Fix issue where a directory is created instead of a file
        (albertony)
-   Mount
    -   Add --devname to set the device name sent to FUSE for mount
        display (Nick Craig-Wood)
-   VFS
    -   Add vfs/stats remote control to show statistics (Nick
        Craig-Wood)
    -   Fix
        failed to _ensure cache internal error: downloaders is nil error
        (Nick Craig-Wood)
    -   Fix handling of special characters in file names (Bumsu Hyeon)
-   Local
    -   Fix hash invalidation which caused errors with local crypt mount
        (Nick Craig-Wood)
-   Crypt
    -   Add base64 and base32768 filename encoding options (Max Sum,
        Sinan Tan)
-   Azure Blob
    -   Implement --azureblob-upload-concurrency parameter to speed
        uploads (Nick Craig-Wood)
    -   Remove 100MB upper limit on chunk_size as it is no longer needed
        (Nick Craig-Wood)
    -   Raise --azureblob-upload-concurrency to 16 by default (Nick
        Craig-Wood)
    -   Fix crash with SAS URL and no container (Nick Craig-Wood)
-   Compress
    -   Fix crash if metadata upload failed (Nick Craig-Wood)
    -   Fix memory leak (Nick Craig-Wood)
-   Drive
    -   Added --drive-copy-shortcut-content (Abhiraj)
    -   Disable OAuth OOB flow (copy a token) due to Google deprecation
        (Nick Craig-Wood)
        -   See the deprecation note.
    -   Add --drive-skip-dangling-shortcuts flag (Nick Craig-Wood)
    -   When using a link type --drive-export-formats shows all doc
        types (Nick Craig-Wood)
-   Dropbox
    -   Speed up directory listings by specifying 1000 items in a chunk
        (Nick Craig-Wood)
    -   Save an API request when at the root (Nick Craig-Wood)
-   Fichier
    -   Implemented About functionality (Gourav T)
-   FTP
    -   Add --ftp-ask-password to prompt for password when needed (Borna
        Butkovic)
-   Google Cloud Storage
    -   Add missing regions (Nick Craig-Wood)
    -   Disable OAuth OOB flow (copy a token) due to Google deprecation
        (Nick Craig-Wood)
        -   See the deprecation note.
-   Googlephotos
    -   Disable OAuth OOB flow (copy a token) due to Google deprecation
        (Nick Craig-Wood)
        -   See the deprecation note.
-   Hasher
    -   Fix crash on object not found (Nick Craig-Wood)
-   Hdfs
    -   Add file (Move) and directory move (DirMove) support (Andy
        Jackson)
-   HTTP
    -   Improved recognition of URL pointing to a single file
        (albertony)
-   Jottacloud
    -   Change API used by recursive list (ListR) (Kim)
    -   Add support for Tele2 Cloud (Fredric Arklid)
-   Koofr
    -   Add Digistorage service as a Koofr provider. (jaKa)
-   Mailru
    -   Fix int32 overflow on arm32 (Ivan Andreev)
-   Onedrive
    -   Add config option for oauth scope Sites.Read.All (Charlie Jiang)
    -   Minor optimization of quickxorhash (Isaac Levy)
    -   Add --onedrive-root-folder-id flag (Nick Craig-Wood)
    -   Do not retry on 400 pathIsTooLong error (ctrl-q)
-   Pcloud
    -   Add support for recursive list (ListR) (Niels van de Weem)
    -   Fix pre-1970 time stamps (Nick Craig-Wood)
-   S3
    -   Use ListObjectsV2 for faster listings (Felix Bünemann)
        -   Fallback to ListObject v1 on unsupported providers (Nick
            Craig-Wood)
    -   Use the ETag on multipart transfers to verify the transfer was
        OK (Nick Craig-Wood)
        -   Add --s3-use-multipart-etag provider quirk to disable this
            on unsupported providers (Nick Craig-Wood)
    -   New Providers
        -   RackCorp object storage (bbabich)
        -   Seagate Lyve Cloud storage (Nick Craig-Wood)
        -   SeaweedFS (Chris Lu)
        -   Storj Shared gateways (Márton Elek, Nick Craig-Wood)
    -   Add Wasabi AP Northeast 2 endpoint info (lindwurm)
    -   Add GLACIER_IR storage class (Yunhai Luo)
    -   Document Content-MD5 workaround for object-lock enabled buckets
        (Paulo Martins)
    -   Fix multipart upload with --no-head flag (Nick Craig-Wood)
    -   Simplify content length processing in s3 with download url
        (Logeshwaran Murugesan)
-   SFTP
    -   Add rclone to list of supported md5sum/sha1sum commands to look
        for (albertony)
    -   Refactor so we only have one way of running remote commands
        (Nick Craig-Wood)
    -   Fix timeout on hashing large files by sending keepalives (Nick
        Craig-Wood)
    -   Fix unnecessary seeking when uploading and downloading files
        (Nick Craig-Wood)
    -   Update docs on how to create known_hosts file (Nick Craig-Wood)
-   Storj
    -   Rename tardigrade backend to storj backend (Nick Craig-Wood)
    -   Implement server side Move for files (Nick Craig-Wood)
    -   Update docs to explain differences between s3 and this backend
        (Elek, Márton)
-   Swift
    -   Fix About so it shows info about the current container only
        (Nick Craig-Wood)
-   Union
    -   Fix treatment of remotes with // in (Nick Craig-Wood)
    -   Fix deadlock when one part of a multi-upload fails (Nick
        Craig-Wood)
    -   Fix eplus policy returned nil (Vitor Arruda)
-   Yandex
    -   Add permanent deletion support (deinferno)

v1.57.0 - 2021-11-01

See commits

-   New backends
    -   Sia: for Sia decentralized cloud (Ian Levesque, Matthew Sevey,
        Ivan Andreev)
    -   Hasher: caches hashes and enable hashes for backends that don't
        support them (Ivan Andreev)
-   New commands
    -   lsjson --stat: to get info about a single file/dir and
        operations/stat api (Nick Craig-Wood)
    -   config paths: show configured paths (albertony)
-   New Features
    -   about: Make human-readable output more consistent with other
        commands (albertony)
    -   build
        -   Use go1.17 for building and make go1.14 the minimum
            supported (Nick Craig-Wood)
        -   Update Go to 1.16 and NDK to 22b for Android builds (x0b)
    -   config
        -   Support hyphen in remote name from environment variable
            (albertony)
        -   Make temporary directory user-configurable (albertony)
        -   Convert --cache-dir value to an absolute path (albertony)
        -   Do not override MIME types from OS defaults (albertony)
    -   docs
        -   Toc styling and header levels cleanup (albertony)
        -   Extend documentation on valid remote names (albertony)
        -   Mention make for building and cmount tag for macos (Alex
            Chen)
        -   ...and many more contributions to numerous to mention!
    -   fs: Move with --ignore-existing will not delete skipped files
        (Nathan Collins)
    -   hashsum
        -   Treat hash values in sum file as case insensitive (Ivan
            Andreev)
        -   Don't put ERROR or UNSUPPORTED in output (Ivan Andreev)
    -   lib/encoder: Add encoding of square brackets (Ivan Andreev)
    -   lib/file: Improve error message when attempting to create dir on
        nonexistent drive on windows (albertony)
    -   lib/http: Factor password hash salt into options with default
        (Nolan Woods)
    -   lib/kv: Add key-value database api (Ivan Andreev)
    -   librclone
        -   Add RcloneFreeString function (albertony)
        -   Free strings in python example (albertony)
    -   log: Optionally print pid in logs (Ivan Andreev)
    -   ls: Introduce --human-readable global option to print
        human-readable sizes (albertony)
    -   ncdu: Introduce key u to toggle human-readable (albertony)
    -   operations: Add rmdirs -v output (Justin Winokur)
    -   serve sftp
        -   Generate an ECDSA server key as well as RSA (Nick
            Craig-Wood)
        -   Generate an Ed25519 server key as well as ECDSA and RSA
            (albertony)
    -   serve docker
        -   Allow to customize proxy settings of docker plugin (Ivan
            Andreev)
        -   Build docker plugin for multiple platforms (Thomas Stachl)
    -   size: Include human-readable count (albertony)
    -   touch: Add support for touching files in directory, with
        recursive option, filtering and --dry-run/-i (albertony)
    -   tree: Option to print human-readable sizes removed in favor of
        global option (albertony)
-   Bug Fixes
    -   lib/http
        -   Fix bad username check in single auth secret provider (Nolan
            Woods)
        -   Fix handling of SSL credentials (Nolan Woods)
    -   serve ftp: Ensure modtime is passed as UTC always to fix
        timezone oddities (Nick Craig-Wood)
    -   serve sftp: Fix generation of server keys on windows (albertony)
    -   serve docker: Fix octal umask (Ivan Andreev)
-   Mount
    -   Enable rclone to be run as mount helper direct from the fstab
        (Ivan Andreev)
    -   Use procfs to validate mount on linux (Ivan Andreev)
    -   Correctly daemonize for compatibility with automount (Ivan
        Andreev)
-   VFS
    -   Ensure names used in cache path are legal on current OS
        (albertony)
    -   Ignore ECLOSED when truncating file handles to fix intermittent
        bad file descriptor error (Nick Craig-Wood)
-   Local
    -   Refactor default OS encoding out from local backend into shared
        encoder lib (albertony)
-   Crypt
    -   Return wrapped object even with --crypt-no-data-encryption (Ivan
        Andreev)
    -   Fix uploads with --crypt-no-data-encryption (Nick Craig-Wood)
-   Azure Blob
    -   Add --azureblob-no-head-object (Tatsuya Noyori)
-   Box
    -   Make listings of heavily used directories more reliable (Nick
        Craig-Wood)
    -   When doing cleanup delete as much as possible (Nick Craig-Wood)
    -   Add --box-list-chunk to control listing chunk size (Nick
        Craig-Wood)
    -   Delete items in parallel in cleanup using --checkers threads
        (Nick Craig-Wood)
    -   Add --box-owned-by to only show items owned by the login passed
        (Nick Craig-Wood)
    -   Retry operation_blocked_temporary errors (Nick Craig-Wood)
-   Chunker
    -   Md5all must create metadata if base hash is slow (Ivan Andreev)
-   Drive
    -   Speed up directory listings by constraining the API listing
        using the current filters (fotile96, Ivan Andreev)
    -   Fix buffering for single request upload for files smaller than
        --drive-upload-cutoff (YenForYang)
    -   Add -o config option to backend drives to make config for all
        shared drives (Nick Craig-Wood)
-   Dropbox
    -   Add --dropbox-batch-commit-timeout to control batch timeout
        (Nick Craig-Wood)
-   Filefabric
    -   Make backoff exponential for error_background to fix errors
        (Nick Craig-Wood)
    -   Fix directory move after API change (Nick Craig-Wood)
-   FTP
    -   Enable tls session cache by default (Ivan Andreev)
    -   Add option to disable tls13 (Ivan Andreev)
    -   Fix timeout after long uploads (Ivan Andreev)
    -   Add support for precise time (Ivan Andreev)
    -   Enable CI for ProFtpd, PureFtpd, VsFtpd (Ivan Andreev)
-   Googlephotos
    -   Use encoder for album names to fix albums with control
        characters (Parth Shukla)
-   Jottacloud
    -   Implement SetModTime to support modtime-only changes (albertony)
    -   Improved error handling with SetModTime and corrupt files in
        general (albertony)
    -   Add support for UserInfo (rclone config userinfo) feature
        (albertony)
    -   Return direct download link from rclone link command (albertony)
-   Koofr
    -   Create direct share link (Dmitry Bogatov)
-   Pcloud
    -   Add sha256 support (Ken Enrique Morel)
-   Premiumizeme
    -   Fix directory listing after API changes (Nick Craig-Wood)
    -   Fix server side move after API change (Nick Craig-Wood)
    -   Fix server side directory move after API changes (Nick
        Craig-Wood)
-   S3
    -   Add support to use CDN URL to download the file (Logeshwaran)
    -   Add AWS Snowball Edge to providers examples (r0kk3rz)
    -   Use a combination of SDK retries and rclone retries (Nick
        Craig-Wood)
    -   Fix IAM Role for Service Account not working and other auth
        problems (Nick Craig-Wood)
    -   Fix shared_credentials_file auth after reverting incorrect fix
        (Nick Craig-Wood)
    -   Fix corrupted on transfer: sizes differ 0 vs xxxx with Ceph
        (Nick Craig-Wood)
-   Seafile
    -   Fix error when not configured for 2fa (Fred)
-   SFTP
    -   Fix timeout when doing MD5SUM of large file (Nick Craig-Wood)
-   Swift
    -   Update OCI URL (David Liu)
    -   Document OVH Cloud Archive (HNGamingUK)
-   Union
    -   Fix rename not working with union of local disk and bucket based
        remote (Nick Craig-Wood)

v1.56.2 - 2021-10-01

See commits

-   Bug Fixes
    -   serve http: Re-add missing auth to http service (Nolan Woods)
    -   build: Update golang.org/x/sys to fix crash on macOS when
        compiled with go1.17 (Herby Gillot)
-   FTP
    -   Fix deadlock after failed update when concurrency=1 (Ivan
        Andreev)

v1.56.1 - 2021-09-19

See commits

-   Bug Fixes
    -   accounting: Fix maximum bwlimit by scaling scale max token
        bucket size (Nick Craig-Wood)
    -   rc: Fix speed does not update in core/stats (negative0)
    -   selfupdate: Fix --quiet option, not quite quiet (yedamo)
    -   serve http: Fix serve http exiting directly after starting
        (Cnly)
    -   build
        -   Apply gofmt from golang 1.17 (Ivan Andreev)
        -   Update Go to 1.16 and NDK to 22b for android/any (x0b)
-   Mount
    -   Fix --daemon mode (Ivan Andreev)
-   VFS
    -   Fix duplicates on rename (Nick Craig-Wood)
    -   Fix crash when truncating a just uploaded object (Nick
        Craig-Wood)
    -   Fix issue where empty dirs would build up in cache meta dir
        (albertony)
-   Drive
    -   Fix instructions for auto config (Greg Sadetsky)
    -   Fix lsf example without drive-impersonate (Greg Sadetsky)
-   Onedrive
    -   Handle HTTP 400 better in PublicLink (Alex Chen)
    -   Clarification of the process for creating custom client_id
        (Mariano Absatz)
-   Pcloud
    -   Return an early error when Put is called with an unknown size
        (Nick Craig-Wood)
    -   Try harder to delete a failed upload (Nick Craig-Wood)
-   S3
    -   Add Wasabi's AP-Northeast endpoint info (hota)
    -   Fix typo in s3 documentation (Greg Sadetsky)
-   Seafile
    -   Fix 2fa config state machine (Fred)
-   SFTP
    -   Remove spurious error message on --sftp-disable-concurrent-reads
        (Nick Craig-Wood)
-   Sugarsync
    -   Fix initial connection after config re-arrangement (Nick
        Craig-Wood)

v1.56.0 - 2021-07-20

See commits

-   New backends
    -   Uptobox (buengese)
-   New commands
    -   serve docker (Antoine GIRARD) (Ivan Andreev)
        -   and accompanying docker volume plugin
    -   checksum to check files against a file of checksums (Ivan
        Andreev)
        -   this is also available as rclone md5sum -C etc
    -   config touch: ensure config exists at configured location
        (albertony)
    -   test changenotify: command to help debugging changenotify (Nick
        Craig-Wood)
-   Deprecations
    -   dbhashsum: Remove command deprecated a year ago (Ivan Andreev)
    -   cache: Deprecate cache backend (Ivan Andreev)
-   New Features
    -   rework config system so it can be used non-interactively via cli
        and rc API.
        -   See docs in config create
        -   This is a very big change to all the backends so may cause
            breakages - please file bugs!
    -   librclone - export the rclone RC as a C library (lewisxy) (Nick
        Craig-Wood)
        -   Link a C-API rclone shared object into your project
        -   Use the RC as an in memory interface
        -   Python example supplied
        -   Also supports Android and gomobile
    -   fs
        -   Add --disable-http2 for global http2 disable (Nick
            Craig-Wood)
        -   Make --dump imply -vv (Alex Chen)
        -   Use binary prefixes for size and rate units (albertony)
        -   Use decimal prefixes for counts (albertony)
        -   Add google search widget to rclone.org (Ivan Andreev)
    -   accounting: Calculate rolling average speed (Haochen Tong)
    -   atexit: Terminate with non-zero status after receiving signal
        (Michael Hanselmann)
    -   build
        -   Only run event-based workflow scripts under rclone repo with
            manual override (Mathieu Carbou)
        -   Add Android build with gomobile (x0b)
    -   check: Log the hash in use like cryptcheck does (Nick
        Craig-Wood)
    -   version: Print os/version, kernel and bitness (Ivan Andreev)
    -   config
        -   Prevent use of Windows reserved names in config file name
            (albertony)
        -   Create config file in windows appdata directory by default
            (albertony)
        -   Treat any config file paths with filename notfound as
            memory-only config (albertony)
        -   Delay load config file (albertony)
        -   Replace defaultConfig with a thread-safe in-memory
            implementation (Chris Macklin)
        -   Allow config create and friends to take key=value parameters
            (Nick Craig-Wood)
        -   Fixed issues with flags/options set by environment vars.
            (Ole Frost)
    -   fshttp: Implement graceful DSCP error handling (Tyson Moore)
    -   lib/http - provides an abstraction for a central http server
        that services can bind routes to (Nolan Woods)
        -   Add --template config and flags to serve/data (Nolan Woods)
        -   Add default 404 handler (Nolan Woods)
    -   link: Use "off" value for unset expiry (Nick Craig-Wood)
    -   oauthutil: Raise fatal error if token expired without refresh
        token (Alex Chen)
    -   rcat: Add --size flag for more efficient uploads of known size
        (Nazar Mishturak)
    -   serve sftp: Add --stdio flag to serve via stdio (Tom)
    -   sync: Don't warn about --no-traverse when --files-from is set
        (Nick Gaya)
    -   test makefiles
        -   Add --seed flag and make data generated repeatable (Nick
            Craig-Wood)
        -   Add log levels and speed summary (Nick Craig-Wood)
-   Bug Fixes
    -   accounting: Fix startTime of statsGroups.sum (Haochen Tong)
    -   cmd/ncdu: Fix out of range panic in delete (buengese)
    -   config
        -   Fix issues with memory-only config file paths (albertony)
        -   Fix in memory config not saving on the fly backend config
            (Nick Craig-Wood)
    -   fshttp: Fix address parsing for DSCP (Tyson Moore)
    -   ncdu: Update termbox-go library to fix crash (Nick Craig-Wood)
    -   oauthutil: Fix old authorize result not recognised (Cnly)
    -   operations: Don't update timestamps of files in --compare-dest
        (Nick Gaya)
    -   selfupdate: fix archive name on macos (Ivan Andreev)
-   Mount
    -   Refactor before adding serve docker (Antoine GIRARD)
-   VFS
    -   Add cache reset for --vfs-cache-max-size handling at cache poll
        interval (Leo Luan)
    -   Fix modtime changing when reading file into cache (Nick
        Craig-Wood)
    -   Avoid unnecessary subdir in cache path (albertony)
    -   Fix that umask option cannot be set as environment variable
        (albertony)
    -   Do not print notice about missing poll-interval support when set
        to 0 (albertony)
-   Local
    -   Always use readlink to read symlink size for better
        compatibility (Nick Craig-Wood)
    -   Add --local-unicode-normalization (and remove
        --local-no-unicode-normalization) (Nick Craig-Wood)
    -   Skip entries removed concurrently with List() (Ivan Andreev)
-   Crypt
    -   Support timestamped filenames from --b2-versions (Dominik
        Mydlil)
-   B2
    -   Don't include the bucket name in public link file prefixes
        (Jeffrey Tolar)
    -   Fix versions and .files with no extension (Nick Craig-Wood)
    -   Factor version handling into lib/version (Dominik Mydlil)
-   Box
    -   Use upload preflight check to avoid listings in file uploads
        (Nick Craig-Wood)
    -   Return errors instead of calling log.Fatal with them (Nick
        Craig-Wood)
-   Drive
    -   Switch to the Drives API for looking up shared drives (Nick
        Craig-Wood)
    -   Fix some google docs being treated as files (Nick Craig-Wood)
-   Dropbox
    -   Add --dropbox-batch-mode flag to speed up uploading (Nick
        Craig-Wood)
        -   Read the batch mode docs for more info
    -   Set visibility in link sharing when --expire is set (Nick
        Craig-Wood)
    -   Simplify chunked uploads (Alexey Ivanov)
    -   Improve "own App IP" instructions (Ivan Andreev)
-   Fichier
    -   Check if more than one upload link is returned (Nick Craig-Wood)
    -   Support downloading password protected files and folders
        (Florian Penzkofer)
    -   Make error messages report text from the API (Nick Craig-Wood)
    -   Fix move of files in the same directory (Nick Craig-Wood)
    -   Check that we actually got a download token and retry if we
        didn't (buengese)
-   Filefabric
    -   Fix listing after change of from field from "int" to int. (Nick
        Craig-Wood)
-   FTP
    -   Make upload error 250 indicate success (Nick Craig-Wood)
-   GCS
    -   Make compatible with gsutil's mtime metadata (database64128)
    -   Clean up time format constants (database64128)
-   Google Photos
    -   Fix read only scope not being used properly (Nick Craig-Wood)
-   HTTP
    -   Replace httplib with lib/http (Nolan Woods)
    -   Clean up Bind to better use middleware (Nolan Woods)
-   Jottacloud
    -   Fix legacy auth with state based config system (buengese)
    -   Fix invalid url in output from link command (albertony)
    -   Add no versions option (buengese)
-   Onedrive
    -   Add list_chunk option (Nick Gaya)
    -   Also report root error if unable to cancel multipart upload
        (Cnly)
    -   Fix failed to configure: empty token found error (Nick
        Craig-Wood)
    -   Make link return direct download link (Xuanchen Wu)
-   S3
    -   Add --s3-no-head-object (Tatsuya Noyori)
    -   Remove WebIdentityRoleProvider to fix crash on auth (Nick
        Craig-Wood)
    -   Don't check to see if remote is object if it ends with / (Nick
        Craig-Wood)
    -   Add SeaweedFS (Chris Lu)
    -   Update Alibaba OSS endpoints (Chuan Zh)
-   SFTP
    -   Fix performance regression by re-enabling concurrent writes
        (Nick Craig-Wood)
    -   Expand tilde and environment variables in configured
        known_hosts_file (albertony)
-   Tardigrade
    -   Upgrade to uplink v1.4.6 (Caleb Case)
    -   Use negative offset (Caleb Case)
    -   Add warning about too many open files (acsfer)
-   WebDAV
    -   Fix sharepoint auth over http (Nick Craig-Wood)
    -   Add headers option (Antoon Prins)

v1.55.1 - 2021-04-26

See commits

-   Bug Fixes
    -   selfupdate
        -   Dont detect FUSE if build is static (Ivan Andreev)
        -   Add build tag noselfupdate (Ivan Andreev)
    -   sync: Fix incorrect error reported by graceful cutoff (Nick
        Craig-Wood)
    -   install.sh: fix macOS arm64 download (Nick Craig-Wood)
    -   build: Fix version numbers in android branch builds (Nick
        Craig-Wood)
    -   docs
        -   Contributing.md: update setup instructions for go1.16 (Nick
            Gaya)
        -   WinFsp 2021 is out of beta (albertony)
        -   Minor cleanup of space around code section (albertony)
        -   Fixed some typos (albertony)
-   VFS
    -   Fix a code path which allows dirty data to be removed causing
        data loss (Nick Craig-Wood)
-   Compress
    -   Fix compressed name regexp (buengese)
-   Drive
    -   Fix backend copyid of google doc to directory (Nick Craig-Wood)
    -   Don't open browser when service account... (Ansh Mittal)
-   Dropbox
    -   Add missing team_data.member scope for use with --impersonate
        (Nick Craig-Wood)
    -   Fix About after scopes changes - rclone config reconnect needed
        (Nick Craig-Wood)
    -   Fix Unable to decrypt returned paths from changeNotify (Nick
        Craig-Wood)
-   FTP
    -   Fix implicit TLS (Ivan Andreev)
-   Onedrive
    -   Work around for random "Unable to initialize RPS" errors
        (OleFrost)
-   SFTP
    -   Revert sftp library to v1.12.0 from v1.13.0 to fix performance
        regression (Nick Craig-Wood)
    -   Fix Update ReadFrom failed: failed to send packet: EOF errors
        (Nick Craig-Wood)
-   Zoho
    -   Fix error when region isn't set (buengese)
    -   Do not ask for mountpoint twice when using headless setup
        (buengese)

v1.55.0 - 2021-03-31

See commits

-   New commands
    -   selfupdate (Ivan Andreev)
        -   Allows rclone to update itself in-place or via a package
            (using --package flag)
        -   Reads cryptographically signed signatures for non beta
            releases
        -   Works on all OSes.
    -   test - these are test commands - use with care!
        -   histogram - Makes a histogram of file name characters.
        -   info - Discovers file name or other limitations for paths.
        -   makefiles - Make a random file hierarchy for testing.
        -   memory - Load all the objects at remote:path into memory and
            report memory stats.
-   New Features
    -   Connection strings
        -   Config parameters can now be passed as part of the remote
            name as a connection string.
        -   For example, to do the equivalent of --drive-shared-with-me
            use drive,shared_with_me:
        -   Make sure we don't save on the fly remote config to the
            config file (Nick Craig-Wood)
        -   Make sure backends with additional config have a different
            name for caching (Nick Craig-Wood)
        -   This work was sponsored by CERN, through the CS3MESH4EOSC
            Project.
            -   CS3MESH4EOSC has received funding from the European
                Union’s Horizon 2020
            -   research and innovation programme under Grant Agreement
                no. 863353.
    -   build
        -   Update go build version to go1.16 and raise minimum go
            version to go1.13 (Nick Craig-Wood)
        -   Make a macOS ARM64 build to support Apple Silicon (Nick
            Craig-Wood)
        -   Install macfuse 4.x instead of osxfuse 3.x (Nick Craig-Wood)
        -   Use GO386=softfloat instead of deprecated GO386=387 for 386
            builds (Nick Craig-Wood)
        -   Disable IOS builds for the time being (Nick Craig-Wood)
        -   Androids builds made with up to date NDK (x0b)
        -   Add an rclone user to the Docker image but don't use it by
            default (cynthia kwok)
    -   dedupe: Make largest directory primary to minimize data moved
        (Saksham Khanna)
    -   config
        -   Wrap config library in an interface (Fionera)
        -   Make config file system pluggable (Nick Craig-Wood)
        -   --config "" or "/notfound" for in memory config only (Nick
            Craig-Wood)
        -   Clear fs cache of stale entries when altering config (Nick
            Craig-Wood)
    -   copyurl: Add option to print resulting auto-filename (albertony)
    -   delete: Make --rmdirs obey the filters (Nick Craig-Wood)
    -   docs - many fixes and reworks from edwardxml, albertony, pvalls,
        Ivan Andreev, Evan Harris, buengese, Alexey Tabakman
    -   encoder/filename - add SCSU as tables (Klaus Post)
    -   Add multiple paths support to --compare-dest and --copy-dest
        flag (K265)
    -   filter: Make --exclude "dir/" equivalent to --exclude "dir/**"
        (Nick Craig-Wood)
    -   fshttp: Add DSCP support with --dscp for QoS with differentiated
        services (Max Sum)
    -   lib/cache: Add Delete and DeletePrefix methods (Nick Craig-Wood)
    -   lib/file
        -   Make pre-allocate detect disk full errors and return them
            (Nick Craig-Wood)
        -   Don't run preallocate concurrently (Nick Craig-Wood)
        -   Retry preallocate on EINTR (Nick Craig-Wood)
    -   operations: Made copy and sync operations obey a RetryAfterError
        (Ankur Gupta)
    -   rc
        -   Add string alternatives for setting options over the rc
            (Nick Craig-Wood)
        -   Add options/local to see the options configured in the
            context (Nick Craig-Wood)
        -   Add _config parameter to set global config for just this rc
            call (Nick Craig-Wood)
        -   Implement passing filter config with _filter parameter (Nick
            Craig-Wood)
        -   Add fscache/clear and fscache/entries to control the fs
            cache (Nick Craig-Wood)
        -   Avoid +Inf value for speed in core/stats (albertony)
        -   Add a full set of stats to core/stats (Nick Craig-Wood)
        -   Allow fs= params to be a JSON blob (Nick Craig-Wood)
    -   rcd: Added systemd notification during the rclone rcd command.
        (Naveen Honest Raj)
    -   rmdirs: Make --rmdirs obey the filters (Nick Craig-Wood)
    -   version: Show build tags and type of executable (Ivan Andreev)
-   Bug Fixes
    -   install.sh: make it fail on download errors (Ivan Andreev)
    -   Fix excessive retries missing --max-duration timeout (Nick
        Craig-Wood)
    -   Fix crash when --low-level-retries=0 (Nick Craig-Wood)
    -   Fix failed token refresh on mounts created via the rc (Nick
        Craig-Wood)
    -   fshttp: Fix bandwidth limiting after bad merge (Nick Craig-Wood)
    -   lib/atexit
        -   Unregister interrupt handler once it has fired so users can
            interrupt again (Nick Craig-Wood)
        -   Fix occasional failure to unmount with CTRL-C (Nick
            Craig-Wood)
        -   Fix deadlock calling Finalise while Run is running (Nick
            Craig-Wood)
    -   lib/rest: Fix multipart uploads not stopping on context cancel
        (Nick Craig-Wood)
-   Mount
    -   Allow mounting to root directory on windows (albertony)
    -   Improved handling of relative paths on windows (albertony)
    -   Fix unicode issues with accented characters on macOS (Nick
        Craig-Wood)
    -   Docs: document the new FileSecurity option in WinFsp 2021
        (albertony)
    -   Docs: add note about volume path syntax on windows (albertony)
    -   Fix caching of old directories after renaming them (Nick
        Craig-Wood)
    -   Update cgofuse to the latest version to bring in macfuse 4 fix
        (Nick Craig-Wood)
-   VFS
    -   --vfs-used-is-size to report used space using recursive scan
        (tYYGH)
    -   Don't set modification time if it was already correct (Nick
        Craig-Wood)
    -   Fix Create causing windows explorer to truncate files on CTRL-C
        CTRL-V (Nick Craig-Wood)
    -   Fix modtimes not updating when writing via cache (Nick
        Craig-Wood)
    -   Fix modtimes changing by fractional seconds after upload (Nick
        Craig-Wood)
    -   Fix modtime set if --vfs-cache-mode writes/full and no write
        (Nick Craig-Wood)
    -   Rename files in cache and cancel uploads on directory rename
        (Nick Craig-Wood)
    -   Fix directory renaming by renaming dirs cached in memory (Nick
        Craig-Wood)
-   Local
    -   Add flag --local-no-preallocate (David Sze)
    -   Make nounc an advanced option except on Windows (albertony)
    -   Don't ignore preallocate disk full errors (Nick Craig-Wood)
-   Cache
    -   Add --fs-cache-expire-duration to control the fs cache (Nick
        Craig-Wood)
-   Crypt
    -   Add option to not encrypt data (Vesnyx)
    -   Log hash ok on upload (albertony)
-   Azure Blob
    -   Add container public access level support. (Manish Kumar)
-   B2
    -   Fix HTML files downloaded via cloudflare (Nick Craig-Wood)
-   Box
    -   Fix transfers getting stuck on token expiry after API change
        (Nick Craig-Wood)
-   Chunker
    -   Partially implement no-rename transactions (Maxwell Calman)
-   Drive
    -   Don't stop server side copy if couldn't read description (Nick
        Craig-Wood)
    -   Pass context on to drive SDK - to help with cancellation (Nick
        Craig-Wood)
-   Dropbox
    -   Add polling for changes support (Robert Thomas)
    -   Make --timeout 0 work properly (Nick Craig-Wood)
    -   Raise priority of rate limited message to INFO to make it more
        noticeable (Nick Craig-Wood)
-   Fichier
    -   Implement copy & move (buengese)
    -   Implement public link (buengese)
-   FTP
    -   Implement Shutdown method (Nick Craig-Wood)
    -   Close idle connections after --ftp-idle-timeout (1m by default)
        (Nick Craig-Wood)
    -   Make --timeout 0 work properly (Nick Craig-Wood)
    -   Add --ftp-close-timeout flag for use with awkward ftp servers
        (Nick Craig-Wood)
    -   Retry connections and logins on 421 errors (Nick Craig-Wood)
-   Hdfs
    -   Fix permissions for when directory is created (Lucas Messenger)
-   Onedrive
    -   Make --timeout 0 work properly (Nick Craig-Wood)
-   S3
    -   Fix --s3-profile which wasn't working (Nick Craig-Wood)
-   SFTP
    -   Close idle connections after --sftp-idle-timeout (1m by default)
        (Nick Craig-Wood)
    -   Fix "file not found" errors for read once servers (Nick
        Craig-Wood)
    -   Fix SetModTime stat failed: object not found with
        --sftp-set-modtime=false (Nick Craig-Wood)
-   Swift
    -   Update github.com/ncw/swift to v2.0.0 (Nick Craig-Wood)
    -   Implement copying large objects (nguyenhuuluan434)
-   Union
    -   Fix crash when using epff policy (Nick Craig-Wood)
    -   Fix union attempting to update files on a read only file system
        (Nick Craig-Wood)
    -   Refactor to use fspath.SplitFs instead of fs.ParseRemote (Nick
        Craig-Wood)
    -   Fix initialisation broken in refactor (Nick Craig-Wood)
-   WebDAV
    -   Add support for sharepoint with NTLM authentication (Rauno Ots)
    -   Make sharepoint-ntlm docs more consistent (Alex Chen)
    -   Improve terminology in sharepoint-ntlm docs (Ivan Andreev)
    -   Disable HTTP/2 for NTLM authentication (georne)
    -   Fix sharepoint-ntlm error 401 for parallel actions (Ivan
        Andreev)
    -   Check that purged directory really exists (Ivan Andreev)
-   Yandex
    -   Make --timeout 0 work properly (Nick Craig-Wood)
-   Zoho
    -   Replace client id - you will need to rclone config reconnect
        after this (buengese)
    -   Add forgotten setupRegion() to NewFs - this finally fixes
        regions other than EU (buengese)

v1.54.1 - 2021-03-08

See commits

-   Bug Fixes
    -   accounting: Fix --bwlimit when up or down is off (Nick
        Craig-Wood)
    -   docs
        -   Fix nesting of brackets and backticks in ftp docs
            (edwardxml)
        -   Fix broken link in sftp page (edwardxml)
        -   Fix typo in crypt.md (Romeo Kienzler)
        -   Changelog: Correct link to digitalis.io (Alex JOST)
        -   Replace #file-caching with #vfs-file-caching (Miron
            Veryanskiy)
        -   Convert bogus example link to code (edwardxml)
        -   Remove dead link from rc.md (edwardxml)
    -   rc: Sync,copy,move: document createEmptySrcDirs parameter (Nick
        Craig-Wood)
    -   lsjson: Fix unterminated JSON in the presence of errors (Nick
        Craig-Wood)
-   Mount
    -   Fix mount dropping on macOS by setting --daemon-timeout 10m
        (Nick Craig-Wood)
-   VFS
    -   Document simultaneous usage with the same cache shouldn't be
        used (Nick Craig-Wood)
-   B2
    -   Automatically raise upload cutoff to avoid spurious error (Nick
        Craig-Wood)
    -   Fix failed to create file system with application key limited to
        a prefix (Nick Craig-Wood)
-   Drive
    -   Refer to Shared Drives instead of Team Drives (Nick Craig-Wood)
-   Dropbox
    -   Add scopes to oauth request and optionally "members.read" (Nick
        Craig-Wood)
-   S3
    -   Fix failed to create file system with folder level permissions
        policy (Nick Craig-Wood)
    -   Fix Wasabi HEAD requests returning stale data by using only 1
        transport (Nick Craig-Wood)
    -   Fix shared_credentials_file auth (Dmitry Chepurovskiy)
    -   Add --s3-no-head to reducing costs docs (Nick Craig-Wood)
-   Union
    -   Fix mkdir at root with remote:/ (Nick Craig-Wood)
-   Zoho
    -   Fix custom client id's (buengese)

v1.54.0 - 2021-02-02

See commits

-   New backends
    -   Compression remote (experimental) (buengese)
    -   Enterprise File Fabric (Nick Craig-Wood)
        -   This work was sponsored by Storage Made Easy
    -   HDFS (Hadoop Distributed File System) (Yury Stankevich)
    -   Zoho workdrive (buengese)
-   New Features
    -   Deglobalise the config (Nick Craig-Wood)
        -   Global config now read from the context
        -   This will enable passing of global config via the rc
        -   This work was sponsored by Digitalis
    -   Add --bwlimit for upload and download (Nick Craig-Wood)
        -   Obey bwlimit in http Transport for better limiting
    -   Enhance systemd integration (Hekmon)
        -   log level identification, manual activation with flag,
            automatic systemd launch detection
        -   Don't compile systemd log integration for non unix systems
            (Benjamin Gustin)
    -   Add a --download flag to md5sum/sha1sum/hashsum to force rclone
        to download and hash files locally (lostheli)
    -   Add --progress-terminal-title to print ETA to terminal title
        (LaSombra)
    -   Make backend env vars show in help as the defaults for backend
        flags (Nick Craig-Wood)
    -   build
        -   Raise minimum go version to go1.12 (Nick Craig-Wood)
    -   dedupe
        -   Add --by-hash to dedupe on content hash not file name (Nick
            Craig-Wood)
        -   Add --dedupe-mode list to just list dupes, changing nothing
            (Nick Craig-Wood)
        -   Add warning if used on a remote which can't have duplicate
            names (Nick Craig-Wood)
    -   fs
        -   Add Shutdown optional method for backends (Nick Craig-Wood)
        -   When using --files-from check files concurrently (zhucan)
        -   Accumulate stats when using --dry-run (Ingo Weiss)
        -   Always show stats when using --dry-run or --interactive
            (Nick Craig-Wood)
        -   Add support for flag --no-console on windows to hide the
            console window (albertony)
    -   genautocomplete: Add support to output to stdout (Ingo)
    -   ncdu
        -   Highlight read errors instead of aborting (Claudio
            Bantaloukas)
        -   Add sort by average size in directory (Adam Plánský)
        -   Add toggle option for average s3ize in directory - key 'a'
            (Adam Plánský)
        -   Add empty folder flag into ncdu browser (Adam Plánský)
        -   Add ! (error) and . (unreadable) file flags to go with e
            (empty) (Nick Craig-Wood)
    -   obscure: Make rclone obscure - ignore newline at end of line
        (Nick Craig-Wood)
    -   operations
        -   Add logs when need to upload files to set mod times (Nick
            Craig-Wood)
        -   Move and copy log name of the destination object in verbose
            (Adam Plánský)
        -   Add size if known to skipped items and JSON log (Nick
            Craig-Wood)
    -   rc
        -   Prefer actual listener address if using ":port" or "addr:0"
            only (Nick Craig-Wood)
        -   Add listener for finished jobs (Aleksandar Jankovic)
    -   serve ftp: Add options to enable TLS (Deepak Sah)
    -   serve http/webdav: Redirect requests to the base url without the
        / (Nick Craig-Wood)
    -   serve restic: Implement object cache (Nick Craig-Wood)
    -   stats: Add counter for deleted directories (Nick Craig-Wood)
    -   sync: Only print "There was nothing to transfer" if no errors
        (Nick Craig-Wood)
    -   webui
        -   Prompt user for updating webui if an update is available
            (Chaitanya Bankanhal)
        -   Fix plugins initialization (negative0)
-   Bug Fixes
    -   fs
        -   Fix nil pointer on copy & move operations directly to remote
            (Anagh Kumar Baranwal)
        -   Fix parsing of .. when joining remotes (Nick Craig-Wood)
    -   log: Fix enabling systemd logging when using --log-file (Nick
        Craig-Wood)
    -   check
        -   Make the error count match up in the log message (Nick
            Craig-Wood)
    -   move: Fix data loss when source and destination are the same
        object (Nick Craig-Wood)
    -   operations
        -   Fix --cutoff-mode hard not cutting off immediately (Nick
            Craig-Wood)
        -   Fix --immutable error message (Nick Craig-Wood)
    -   sync
        -   Fix --cutoff-mode soft & cautious so it doesn't end the
            transfer early (Nick Craig-Wood)
        -   Fix --immutable errors retrying many times (Nick Craig-Wood)
-   Docs
    -   Many fixes and a rewrite of the filtering docs (edwardxml)
    -   Many spelling and grammar fixes (Josh Soref)
    -   Doc fixes for commands delete, purge, rmdir, rmdirs and mount
        (albertony)
    -   And thanks to these people for many doc fixes too numerous to
        list
        -   Ameer Dawood, Antoine GIRARD, Bob Bagwill, Christopher
            Stewart
        -   CokeMine, David, Dov Murik, Durval Menezes, Evan Harris,
            gtorelly
        -   Ilyess Bachiri, Janne Johansson, Kerry Su, Marcin Zelent,
        -   Martin Michlmayr, Milly, Sơn Trần-Nguyễn
-   Mount
    -   Update systemd status with cache stats (Hekmon)
    -   Disable bazil/fuse based mount on macOS (Nick Craig-Wood)
        -   Make rclone mount actually run rclone cmount under macOS
            (Nick Craig-Wood)
    -   Implement mknod to make NFS file creation work (Nick Craig-Wood)
    -   Make sure we don't call umount more than once (Nick Craig-Wood)
    -   More user friendly mounting as network drive on windows
        (albertony)
    -   Detect if uid or gid are set in same option string: -o
        uid=123,gid=456 (albertony)
    -   Don't attempt to unmount if fs has been destroyed already (Nick
        Craig-Wood)
-   VFS
    -   Fix virtual entries causing deleted files to still appear (Nick
        Craig-Wood)
    -   Fix "file already exists" error for stale cache files (Nick
        Craig-Wood)
    -   Fix file leaks with --vfs-cache-mode full and --buffer-size 0
        (Nick Craig-Wood)
    -   Fix invalid cache path on windows when using :backend: as remote
        (albertony)
-   Local
    -   Continue listing files/folders when a circular symlink is
        detected (Manish Gupta)
    -   New flag --local-zero-size-links to fix sync on some virtual
        filesystems (Riccardo Iaconelli)
-   Azure Blob
    -   Add support for service principals (James Lim)
    -   Add support for managed identities (Brad Ackerman)
    -   Add examples for access tier (Bob Pusateri)
    -   Utilize the streaming capabilities from the SDK for multipart
        uploads (Denis Neuling)
    -   Fix setting of mime types (Nick Craig-Wood)
    -   Fix crash when listing outside a SAS URL's root (Nick
        Craig-Wood)
    -   Delete archive tier blobs before update if
        --azureblob-archive-tier-delete (Nick Craig-Wood)
    -   Fix crash on startup (Nick Craig-Wood)
    -   Fix memory usage by upgrading the SDK to v0.13.0 and
        implementing a TransferManager (Nick Craig-Wood)
    -   Require go1.14+ to compile due to SDK changes (Nick Craig-Wood)
-   B2
    -   Make NewObject use less expensive API calls (Nick Craig-Wood)
        -   This will improve --files-from and restic serve in
            particular
    -   Fixed crash on an empty file name (lluuaapp)
-   Box
    -   Fix NewObject for files that differ in case (Nick Craig-Wood)
    -   Fix finding directories in a case insensitive way (Nick
        Craig-Wood)
-   Chunker
    -   Skip long local hashing, hash in-transit (fixes) (Ivan Andreev)
    -   Set Features ReadMimeType to false as Object.MimeType not
        supported (Nick Craig-Wood)
    -   Fix case-insensitive NewObject, test metadata detection (Ivan
        Andreev)
-   Drive
    -   Implement rclone backend copyid command for copying files by ID
        (Nick Craig-Wood)
    -   Added flag --drive-stop-on-download-limit to stop transfers when
        the download limit is exceeded (Anagh Kumar Baranwal)
    -   Implement CleanUp workaround for team drives (buengese)
    -   Allow shortcut resolution and creation to be retried (Nick
        Craig-Wood)
    -   Log that emptying the trash can take some time (Nick Craig-Wood)
    -   Add xdg office icons to xdg desktop files (Pau
        Rodriguez-Estivill)
-   Dropbox
    -   Add support for viewing shared files and folders (buengese)
    -   Enable short lived access tokens (Nick Craig-Wood)
    -   Implement IDer on Objects so rclone lsf etc can read the IDs
        (buengese)
    -   Set Features ReadMimeType to false as Object.MimeType not
        supported (Nick Craig-Wood)
    -   Make malformed_path errors from too long files not retriable
        (Nick Craig-Wood)
    -   Test file name length before upload to fix upload loop (Nick
        Craig-Wood)
-   Fichier
    -   Set Features ReadMimeType to true as Object.MimeType is
        supported (Nick Craig-Wood)
-   FTP
    -   Add --ftp-disable-msld option to ignore MLSD for really old
        servers (Nick Craig-Wood)
    -   Make --tpslimit apply (Nick Craig-Wood)
-   Google Cloud Storage
    -   Storage class object header support (Laurens Janssen)
    -   Fix anonymous client to use rclone's HTTP client (Nick
        Craig-Wood)
    -   Fix
        Entry doesn't belong in directory "" (same as directory) - ignoring
        (Nick Craig-Wood)
-   Googlephotos
    -   New flag --gphotos-include-archived to show archived photos as
        well (Nicolas Rueff)
-   Jottacloud
    -   Don't erroneously report support for writing mime types
        (buengese)
    -   Add support for Telia Cloud (Patrik Nordlén)
-   Mailru
    -   Accept special folders eg camera-upload (Ivan Andreev)
    -   Avoid prehashing of large local files (Ivan Andreev)
    -   Fix uploads after recent changes on server (Ivan Andreev)
    -   Fix range requests after June 2020 changes on server (Ivan
        Andreev)
    -   Fix invalid timestamp on corrupted files (fixes) (Ivan Andreev)
    -   Remove deprecated protocol quirks (Ivan Andreev)
-   Memory
    -   Fix setting of mime types (Nick Craig-Wood)
-   Onedrive
    -   Add support for China region operated by 21vianet and other
        regional suppliers (NyaMisty)
    -   Warn on gateway timeout errors (Nick Craig-Wood)
    -   Fall back to normal copy if server-side copy unavailable (Alex
        Chen)
    -   Fix server-side copy completely disabled on OneDrive for
        Business (Cnly)
    -   (business only) workaround to replace existing file on
        server-side copy (Alex Chen)
    -   Enhance link creation with expiry, scope, type and password
        (Nick Craig-Wood)
    -   Remove % and # from the set of encoded characters (Alex Chen)
    -   Support addressing site by server-relative URL (kice)
-   Opendrive
    -   Fix finding directories in a case insensitive way (Nick
        Craig-Wood)
-   Pcloud
    -   Fix setting of mime types (Nick Craig-Wood)
-   Premiumizeme
    -   Fix finding directories in a case insensitive way (Nick
        Craig-Wood)
-   Qingstor
    -   Fix error propagation in CleanUp (Nick Craig-Wood)
    -   Fix rclone cleanup (Nick Craig-Wood)
-   S3
    -   Added --s3-disable-http2 to disable http/2 (Anagh Kumar
        Baranwal)
    -   Complete SSE-C implementation (Nick Craig-Wood)
        -   Fix hashes on small files with AWS:KMS and SSE-C (Nick
            Craig-Wood)
        -   Add MD5 metadata to objects uploaded with SSE-AWS/SSE-C
            (Nick Craig-Wood)
    -   Add --s3-no-head parameter to minimise transactions on upload
        (Nick Craig-Wood)
    -   Update docs with a Reducing Costs section (Nick Craig-Wood)
    -   Added error handling for error code 429 indicating too many
        requests (Anagh Kumar Baranwal)
    -   Add requester pays option (kelv)
    -   Fix copy multipart with v2 auth failing with
        'SignatureDoesNotMatch' (Louis Koo)
-   SFTP
    -   Allow cert based auth via optional pubkey (Stephen Harris)
    -   Allow user to optionally check server hosts key to add security
        (Stephen Harris)
    -   Defer asking for user passwords until the SSH connection
        succeeds (Stephen Harris)
    -   Remember entered password in AskPass mode (Stephen Harris)
    -   Implement Shutdown method (Nick Craig-Wood)
    -   Implement keyboard interactive authentication (Nick Craig-Wood)
    -   Make --tpslimit apply (Nick Craig-Wood)
    -   Implement --sftp-use-fstat for unusual SFTP servers (Nick
        Craig-Wood)
-   Sugarsync
    -   Fix NewObject for files that differ in case (Nick Craig-Wood)
    -   Fix finding directories in a case insensitive way (Nick
        Craig-Wood)
-   Swift
    -   Fix deletion of parts of Static Large Object (SLO) (Nguyễn Hữu
        Luân)
    -   Ensure partially uploaded large files are uploaded unless
        --swift-leave-parts-on-error (Nguyễn Hữu Luân)
-   Tardigrade
    -   Upgrade to uplink v1.4.1 (Caleb Case)
-   WebDAV
    -   Updated docs to show streaming to nextcloud is working (Durval
        Menezes)
-   Yandex
    -   Set Features WriteMimeType to false as Yandex ignores mime types
        (Nick Craig-Wood)

v1.53.4 - 2021-01-20

See commits

-   Bug Fixes
    -   accounting: Fix data race in Transferred() (Maciej Zimnoch)
    -   build
        -   Stop tagged releases making a current beta (Nick Craig-Wood)
        -   Upgrade docker buildx action (Matteo Pietro Dazzi)
        -   Add -buildmode to cross-compile.go (Nick Craig-Wood)
        -   Fix docker build by upgrading ilteoood/docker_buildx (Nick
            Craig-Wood)
        -   Revert GitHub actions brew fix since this is now fixed (Nick
            Craig-Wood)
        -   Fix brew install --cask syntax for macOS build (Nick
            Craig-Wood)
        -   Update nfpm syntax to fix build of .deb/.rpm packages (Nick
            Craig-Wood)
        -   Fix for Windows build errors (Ivan Andreev)
    -   fs: Parseduration: fixed tests to use UTC time (Ankur Gupta)
    -   fshttp: Prevent overlap of HTTP headers in logs (Nathan Collins)
    -   rc
        -   Fix core/command giving 500 internal error (Nick Craig-Wood)
        -   Add Copy method to rc.Params (Nick Craig-Wood)
        -   Fix 500 error when marshalling errors from core/command
            (Nick Craig-Wood)
        -   plugins: Create plugins files only if webui is enabled.
            (negative0)
    -   serve http: Fix serving files of unknown length (Nick
        Craig-Wood)
    -   serve sftp: Fix authentication on one connection blocking others
        (Nick Craig-Wood)
-   Mount
    -   Add optional brew tag to throw an error when using mount in the
        binaries installed via Homebrew (Anagh Kumar Baranwal)
    -   Add "." and ".." to directories to match cmount and expectations
        (Nick Craig-Wood)
-   VFS
    -   Make cache dir absolute before using it to fix path too long
        errors (Nick Craig-Wood)
-   Chunker
    -   Improve detection of incompatible metadata (Ivan Andreev)
-   Google Cloud Storage
    -   Fix server side copy of large objects (Nick Craig-Wood)
-   Jottacloud
    -   Fix token renewer to fix long uploads (Nick Craig-Wood)
    -   Fix token refresh failed: is not a regular file error (Nick
        Craig-Wood)
-   Pcloud
    -   Only use SHA1 hashes in EU region (Nick Craig-Wood)
-   Sharefile
    -   Undo Fix backend due to API swapping integers for strings (Nick
        Craig-Wood)
-   WebDAV
    -   Fix Open Range requests to fix 4shared mount (Nick Craig-Wood)
    -   Add "Depth: 0" to GET requests to fix bitrix (Nick Craig-Wood)

v1.53.3 - 2020-11-19

See commits

-   Bug Fixes
    -   random: Fix incorrect use of math/rand instead of crypto/rand
        CVE-2020-28924 (Nick Craig-Wood)
        -   Passwords you have generated with rclone config may be
            insecure
        -   See issue #4783 for more details and a checking tool
    -   random: Seed math/rand in one place with crypto strong seed
        (Nick Craig-Wood)
-   VFS
    -   Fix vfs/refresh calls with fs= parameter (Nick Craig-Wood)
-   Sharefile
    -   Fix backend due to API swapping integers for strings (Nick
        Craig-Wood)

v1.53.2 - 2020-10-26

See commits

-   Bug Fixes
    -   accounting
        -   Fix incorrect speed and transferTime in core/stats (Nick
            Craig-Wood)
        -   Stabilize display order of transfers on Windows (Nick
            Craig-Wood)
    -   operations
        -   Fix use of --suffix without --backup-dir (Nick Craig-Wood)
        -   Fix spurious "--checksum is in use but the source and
            destination have no hashes in common" (Nick Craig-Wood)
    -   build
        -   Work around GitHub actions brew problem (Nick Craig-Wood)
        -   Stop using set-env and set-path in the GitHub actions (Nick
            Craig-Wood)
-   Mount
    -   mount2: Fix the swapped UID / GID values (Russell Cattelan)
-   VFS
    -   Detect and recover from a file being removed externally from the
        cache (Nick Craig-Wood)
    -   Fix a deadlock vulnerability in downloaders.Close (Leo Luan)
    -   Fix a race condition in retryFailedResets (Leo Luan)
    -   Fix missed concurrency control between some item operations and
        reset (Leo Luan)
    -   Add exponential backoff during ENOSPC retries (Leo Luan)
    -   Add a missed update of used cache space (Leo Luan)
    -   Fix --no-modtime to not attempt to set modtimes (as documented)
        (Nick Craig-Wood)
-   Local
    -   Fix sizes and syncing with --links option on Windows (Nick
        Craig-Wood)
-   Chunker
    -   Disable ListR to fix missing files on GDrive (workaround) (Ivan
        Andreev)
    -   Fix upload over crypt (Ivan Andreev)
-   Fichier
    -   Increase maximum file size from 100GB to 300GB (gyutw)
-   Jottacloud
    -   Remove clientSecret from config when upgrading to token based
        authentication (buengese)
    -   Avoid double url escaping of device/mountpoint (albertony)
    -   Remove DirMove workaround as it's not required anymore - also
        (buengese)
-   Mailru
    -   Fix uploads after recent changes on server (Ivan Andreev)
    -   Fix range requests after june changes on server (Ivan Andreev)
    -   Fix invalid timestamp on corrupted files (fixes) (Ivan Andreev)
-   Onedrive
    -   Fix disk usage for sharepoint (Nick Craig-Wood)
-   S3
    -   Add missing regions for AWS (Anagh Kumar Baranwal)
-   Seafile
    -   Fix accessing libraries > 2GB on 32 bit systems (Muffin King)
-   SFTP
    -   Always convert the checksum to lower case (buengese)
-   Union
    -   Create root directories if none exist (Nick Craig-Wood)

v1.53.1 - 2020-09-13

See commits

-   Bug Fixes
    -   accounting: Remove new line from end of --stats-one-line display
        (Nick Craig-Wood)
    -   check
        -   Add back missing --download flag (Nick Craig-Wood)
        -   Fix docs (Nick Craig-Wood)
    -   docs
        -   Note --log-file does append (Nick Craig-Wood)
        -   Add full stops for consistency in rclone --help (edwardxml)
        -   Add Tencent COS to s3 provider list (wjielai)
        -   Updated mount command to reflect that it requires Go 1.13 or
            newer (Evan Harris)
        -   jottacloud: Mention that uploads from local disk will not
            need to cache files to disk for md5 calculation (albertony)
        -   Fix formatting of rc docs page (Nick Craig-Wood)
    -   build
        -   Include vendor tar ball in release and fix startdev (Nick
            Craig-Wood)
        -   Fix "Illegal instruction" error for ARMv6 builds (Nick
            Craig-Wood)
        -   Fix architecture name in ARMv7 build (Nick Craig-Wood)
-   VFS
    -   Fix spurious error "vfs cache: failed to _ensure cache EOF"
        (Nick Craig-Wood)
    -   Log an ERROR if we fail to set the file to be sparse (Nick
        Craig-Wood)
-   Local
    -   Log an ERROR if we fail to set the file to be sparse (Nick
        Craig-Wood)
-   Drive
    -   Re-adds special oauth help text (Tim Gallant)
-   Opendrive
    -   Do not retry 400 errors (Evan Harris)

v1.53.0 - 2020-09-02

See commits

-   New Features
    -   The VFS layer was heavily reworked for this release - see below
        for more details
    -   Interactive mode -i/--interactive for destructive operations
        (fishbullet)
    -   Add --bwlimit-file flag to limit speeds of individual file
        transfers (Nick Craig-Wood)
    -   Transfers are sorted by start time in the stats and progress
        output (Max Sum)
    -   Make sure backends expand ~ and environment vars in file names
        they use (Nick Craig-Wood)
    -   Add --refresh-times flag to set modtimes on hashless backends
        (Nick Craig-Wood)
    -   build
        -   Remove vendor directory in favour of Go modules (Nick
            Craig-Wood)
        -   Build with go1.15.x by default (Nick Craig-Wood)
        -   Drop macOS 386 build as it is no longer supported by go1.15
            (Nick Craig-Wood)
        -   Add ARMv7 to the supported builds (Nick Craig-Wood)
        -   Enable rclone cmount on macOS (Nick Craig-Wood)
        -   Make rclone build with gccgo (Nick Craig-Wood)
        -   Make rclone build with wasm (Nick Craig-Wood)
        -   Change beta numbering to be semver compatible (Nick
            Craig-Wood)
        -   Add file properties and icon to Windows executable
            (albertony)
        -   Add experimental interface for integrating rclone into
            browsers (Nick Craig-Wood)
    -   lib: Add file name compression (Klaus Post)
    -   rc
        -   Allow installation and use of plugins and test plugins with
            rclone-webui (Chaitanya Bankanhal)
        -   Add reverse proxy pluginsHandler for serving plugins
            (Chaitanya Bankanhal)
        -   Add mount/listmounts option for listing current mounts
            (Chaitanya Bankanhal)
        -   Add operations/uploadfile to upload a file through rc using
            encoding multipart/form-data (Chaitanya Bankanhal)
        -   Add core/command to execute rclone terminal commands.
            (Chaitanya Bankanhal)
    -   rclone check
        -   Add reporting of filenames for same/missing/changed (Nick
            Craig-Wood)
        -   Make check command obey --dry-run/-i/--interactive (Nick
            Craig-Wood)
        -   Make check do --checkers files concurrently (Nick
            Craig-Wood)
        -   Retry downloads if they fail when using the --download flag
            (Nick Craig-Wood)
        -   Make it show stats by default (Nick Craig-Wood)
    -   rclone obscure: Allow obscure command to accept password on
        STDIN (David Ibarra)
    -   rclone config
        -   Set RCLONE_CONFIG_DIR for use in config files and
            subprocesses (Nick Craig-Wood)
        -   Reject remote names starting with a dash. (jtagcat)
    -   rclone cryptcheck: Add reporting of filenames for
        same/missing/changed (Nick Craig-Wood)
    -   rclone dedupe: Make it obey the --size-only flag for duplicate
        detection (Nick Craig-Wood)
    -   rclone link: Add --expire and --unlink flags (Roman Kredentser)
    -   rclone mkdir: Warn when using mkdir on remotes which can't have
        empty directories (Nick Craig-Wood)
    -   rclone rc: Allow JSON parameters to simplify command line usage
        (Nick Craig-Wood)
    -   rclone serve ftp
        -   Don't compile on < go1.13 after dependency update (Nick
            Craig-Wood)
        -   Add error message if auth proxy fails (Nick Craig-Wood)
        -   Use refactored goftp.io/server library for binary shrink
            (Nick Craig-Wood)
    -   rclone serve restic: Expose interfaces so that rclone can be
        used as a library from within restic (Jack)
    -   rclone sync: Add --track-renames-strategy leaf (Nick Craig-Wood)
    -   rclone touch: Add ability to set nanosecond resolution times
        (Nick Craig-Wood)
    -   rclone tree: Remove -i shorthand for --noindent as it conflicts
        with -i/--interactive (Nick Craig-Wood)
-   Bug Fixes
    -   accounting
        -   Fix documentation for speed/speedAvg (Nick Craig-Wood)
        -   Fix elapsed time not show actual time since beginning
            (Chaitanya Bankanhal)
        -   Fix deadlock in stats printing (Nick Craig-Wood)
    -   build
        -   Fix file handle leak in GitHub release tool (Garrett Squire)
    -   rclone check: Fix successful retries with --download counting
        errors (Nick Craig-Wood)
    -   rclone dedupe: Fix logging to be easier to understand (Nick
        Craig-Wood)
-   Mount
    -   Warn macOS users that mount implementation is changing (Nick
        Craig-Wood)
        -   to test the new implementation use rclone cmount instead of
            rclone mount
        -   this is because the library rclone uses has dropped macOS
            support
    -   rc interface
        -   Add call for unmount all (Chaitanya Bankanhal)
        -   Make mount/mount remote control take vfsOpt option (Nick
            Craig-Wood)
        -   Add mountOpt to mount/mount (Nick Craig-Wood)
        -   Add VFS and Mount options to mount/listmounts (Nick
            Craig-Wood)
    -   Catch panics in cgofuse initialization and turn into error
        messages (Nick Craig-Wood)
    -   Always supply stat information in Readdir (Nick Craig-Wood)
    -   Add support for reading unknown length files using direct IO
        (Windows) (Nick Craig-Wood)
    -   Fix On Windows don't add -o uid/gid=-1 if user supplies
        -o uid/gid. (Nick Craig-Wood)
    -   Fix macOS losing directory contents in cmount (Nick Craig-Wood)
    -   Fix volume name broken in recent refactor (Nick Craig-Wood)
-   VFS
    -   Implement partial reads for --vfs-cache-mode full (Nick
        Craig-Wood)
    -   Add --vfs-writeback option to delay writes back to cloud storage
        (Nick Craig-Wood)
    -   Add --vfs-read-ahead parameter for use with
        --vfs-cache-mode full (Nick Craig-Wood)
    -   Restart pending uploads on restart of the cache (Nick
        Craig-Wood)
    -   Support synchronous cache space recovery upon ENOSPC (Leo Luan)
    -   Allow ReadAt and WriteAt to run concurrently with themselves
        (Nick Craig-Wood)
    -   Change modtime of file before upload to current (Rob Calistri)
    -   Recommend --vfs-cache-modes writes on backends which can't
        stream (Nick Craig-Wood)
    -   Add an optional fs parameter to vfs rc methods (Nick Craig-Wood)
    -   Fix errors when using > 260 char files in the cache in Windows
        (Nick Craig-Wood)
    -   Fix renaming of items while they are being uploaded (Nick
        Craig-Wood)
    -   Fix very high load caused by slow directory listings (Nick
        Craig-Wood)
    -   Fix renamed files not being uploaded with
        --vfs-cache-mode minimal (Nick Craig-Wood)
    -   Fix directory locking caused by slow directory listings (Nick
        Craig-Wood)
    -   Fix saving from chrome without --vfs-cache-mode writes (Nick
        Craig-Wood)
-   Local
    -   Add --local-no-updated to provide a consistent view of changing
        objects (Nick Craig-Wood)
    -   Add --local-no-set-modtime option to prevent modtime changes
        (tyhuber1)
    -   Fix race conditions updating and reading Object metadata (Nick
        Craig-Wood)
-   Cache
    -   Make any created backends be cached to fix rc problems (Nick
        Craig-Wood)
    -   Fix dedupe on caches wrapping drives (Nick Craig-Wood)
-   Crypt
    -   Add --crypt-server-side-across-configs flag (Nick Craig-Wood)
    -   Make any created backends be cached to fix rc problems (Nick
        Craig-Wood)
-   Alias
    -   Make any created backends be cached to fix rc problems (Nick
        Craig-Wood)
-   Azure Blob
    -   Don't compile on < go1.13 after dependency update (Nick
        Craig-Wood)
-   B2
    -   Implement server-side copy for files > 5GB (Nick Craig-Wood)
    -   Cancel in progress multipart uploads and copies on rclone exit
        (Nick Craig-Wood)
    -   Note that b2's encoding now allows  but rclone's hasn't changed
        (Nick Craig-Wood)
    -   Fix transfers when using download_url (Nick Craig-Wood)
-   Box
    -   Implement rclone cleanup (buengese)
    -   Cancel in progress multipart uploads and copies on rclone exit
        (Nick Craig-Wood)
    -   Allow authentication with access token (David)
-   Chunker
    -   Make any created backends be cached to fix rc problems (Nick
        Craig-Wood)
-   Drive
    -   Add rclone backend drives to list shared drives (teamdrives)
        (Nick Craig-Wood)
    -   Implement rclone backend untrash (Nick Craig-Wood)
    -   Work around drive bug which didn't set modtime of copied docs
        (Nick Craig-Wood)
    -   Added --drive-starred-only to only show starred files (Jay
        McEntire)
    -   Deprecate --drive-alternate-export as it is no longer needed
        (themylogin)
    -   Fix duplication of Google docs on server-side copy (Nick
        Craig-Wood)
    -   Fix "panic: send on closed channel" when recycling dir entries
        (Nick Craig-Wood)
-   Dropbox
    -   Add copyright detector info in limitations section in the docs
        (Alex Guerrero)
    -   Fix rclone link by removing expires parameter (Nick Craig-Wood)
-   Fichier
    -   Detect Flood detected: IP Locked error and sleep for 30s (Nick
        Craig-Wood)
-   FTP
    -   Add explicit TLS support (Heiko Bornholdt)
    -   Add support for --dump bodies and --dump auth for debugging
        (Nick Craig-Wood)
    -   Fix interoperation with pure-ftpd (Nick Craig-Wood)
-   Google Cloud Storage
    -   Add support for anonymous access (Kai Lüke)
-   Jottacloud
    -   Bring back legacy authentication for use with whitelabel
        versions (buengese)
    -   Switch to new api root - also implement a very ugly workaround
        for the DirMove failures (buengese)
-   Onedrive
    -   Rework cancel of multipart uploads on rclone exit (Nick
        Craig-Wood)
    -   Implement rclone cleanup (Nick Craig-Wood)
    -   Add --onedrive-no-versions flag to remove old versions (Nick
        Craig-Wood)
-   Pcloud
    -   Implement rclone link for public link creation (buengese)
-   Qingstor
    -   Cancel in progress multipart uploads on rclone exit (Nick
        Craig-Wood)
-   S3
    -   Preserve metadata when doing multipart copy (Nick Craig-Wood)
    -   Cancel in progress multipart uploads and copies on rclone exit
        (Nick Craig-Wood)
    -   Add rclone link for public link sharing (Roman Kredentser)
    -   Add rclone backend restore command to restore objects from
        GLACIER (Nick Craig-Wood)
    -   Add rclone cleanup and rclone backend cleanup to clean
        unfinished multipart uploads (Nick Craig-Wood)
    -   Add rclone backend list-multipart-uploads to list unfinished
        multipart uploads (Nick Craig-Wood)
    -   Add --s3-max-upload-parts support (Kamil Trzciński)
    -   Add --s3-no-check-bucket for minimising rclone transactions and
        perms (Nick Craig-Wood)
    -   Add --s3-profile and --s3-shared-credentials-file options (Nick
        Craig-Wood)
    -   Use regional s3 us-east-1 endpoint (David)
    -   Add Scaleway provider (Vincent Feltz)
    -   Update IBM COS endpoints (Egor Margineanu)
    -   Reduce the default --s3-copy-cutoff to < 5GB for Backblaze S3
        compatibility (Nick Craig-Wood)
    -   Fix detection of bucket existing (Nick Craig-Wood)
-   SFTP
    -   Use the absolute path instead of the relative path for listing
        for improved compatibility (Nick Craig-Wood)
    -   Add --sftp-subsystem and --sftp-server-command options (aus)
-   Swift
    -   Fix dangling large objects breaking the listing (Nick
        Craig-Wood)
    -   Fix purge not deleting directory markers (Nick Craig-Wood)
    -   Fix update multipart object removing all of its own parts (Nick
        Craig-Wood)
    -   Fix missing hash from object returned from upload (Nick
        Craig-Wood)
-   Tardigrade
    -   Upgrade to uplink v1.2.0 (Kaloyan Raev)
-   Union
    -   Fix writing with the all policy (Nick Craig-Wood)
-   WebDAV
    -   Fix directory creation with 4shared (Nick Craig-Wood)

v1.52.3 - 2020-08-07

See commits

-   Bug Fixes
    -   docs
        -   Disable smart typography (e.g. en-dash) in MANUAL.* and man
            page (Nick Craig-Wood)
        -   Update install.md to reflect minimum Go version (Evan
            Harris)
        -   Update install from source instructions (Nick Craig-Wood)
        -   make_manual: Support SOURCE_DATE_EPOCH (Morten Linderud)
    -   log: Fix --use-json-log going to stderr not --log-file on
        Windows (Nick Craig-Wood)
    -   serve dlna: Fix file list on Samsung Series 6+ TVs (Matteo
        Pietro Dazzi)
    -   sync: Fix deadlock with --track-renames-strategy modtime (Nick
        Craig-Wood)
-   Cache
    -   Fix moveto/copyto remote:file remote:file2 (Nick Craig-Wood)
-   Drive
    -   Stop using root_folder_id as a cache (Nick Craig-Wood)
    -   Make dangling shortcuts appear in listings (Nick Craig-Wood)
    -   Drop "Disabling ListR" messages down to debug (Nick Craig-Wood)
    -   Workaround and policy for Google Drive API (Dmitry Ustalov)
-   FTP
    -   Add note to docs about home vs root directory selection (Nick
        Craig-Wood)
-   Onedrive
    -   Fix reverting to Copy when Move would have worked (Nick
        Craig-Wood)
    -   Avoid comma rendered in URL in onedrive.md (Kevin)
-   Pcloud
    -   Fix oauth on European region "eapi.pcloud.com" (Nick Craig-Wood)
-   S3
    -   Fix bucket Region auto detection when Region unset in config
        (Nick Craig-Wood)

v1.52.2 - 2020-06-24

See commits

-   Bug Fixes
    -   build
        -   Fix docker release build action (Nick Craig-Wood)
        -   Fix custom timezone in Docker image (NoLooseEnds)
    -   check: Fix misleading message which printed errors instead of
        differences (Nick Craig-Wood)
    -   errors: Add WSAECONNREFUSED and more to the list of retriable
        Windows errors (Nick Craig-Wood)
    -   rcd: Fix incorrect prometheus metrics (Gary Kim)
    -   serve restic: Fix flags so they use environment variables (Nick
        Craig-Wood)
    -   serve webdav: Fix flags so they use environment variables (Nick
        Craig-Wood)
    -   sync: Fix --track-renames-strategy modtime (Nick Craig-Wood)
-   Drive
    -   Fix not being able to delete a directory with a trashed shortcut
        (Nick Craig-Wood)
    -   Fix creating a directory inside a shortcut (Nick Craig-Wood)
    -   Fix --drive-impersonate with cached root_folder_id (Nick
        Craig-Wood)
-   SFTP
    -   Fix SSH key PEM loading (Zac Rubin)
-   Swift
    -   Speed up deletes by not retrying segment container deletes (Nick
        Craig-Wood)
-   Tardigrade
    -   Upgrade to uplink v1.1.1 (Caleb Case)
-   WebDAV
    -   Fix free/used display for rclone about/df for certain backends
        (Nick Craig-Wood)

v1.52.1 - 2020-06-10

See commits

-   Bug Fixes
    -   lib/file: Fix SetSparse on Windows 7 which fixes downloads of
        files > 250MB (Nick Craig-Wood)
    -   build
        -   Update go.mod to go1.14 to enable -mod=vendor build (Nick
            Craig-Wood)
        -   Remove quicktest from Dockerfile (Nick Craig-Wood)
        -   Build Docker images with GitHub actions (Matteo Pietro
            Dazzi)
        -   Update Docker build workflows (Nick Craig-Wood)
        -   Set user_allow_other in /etc/fuse.conf in the Docker image
            (Nick Craig-Wood)
        -   Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)
    -   docs
        -   Add link to source and modified time to footer of every page
            (Nick Craig-Wood)
        -   Remove manually set dates and use git dates instead (Nick
            Craig-Wood)
        -   Minor tense, punctuation, brevity and positivity changes for
            the home page (edwardxml)
        -   Remove leading slash in page reference in footer when
            present (Nick Craig-Wood)
        -   Note commands which need obscured input in the docs (Nick
            Craig-Wood)
        -   obscure: Write more help as we are referencing it elsewhere
            (Nick Craig-Wood)
-   VFS
    -   Fix OS vs Unix path confusion - fixes ChangeNotify on Windows
        (Nick Craig-Wood)
-   Drive
    -   Fix missing items when listing using --fast-list / ListR (Nick
        Craig-Wood)
-   Putio
    -   Fix panic on Object.Open (Cenk Alti)
-   S3
    -   Fix upload of single files into buckets without create
        permission (Nick Craig-Wood)
    -   Fix --header-upload (Nick Craig-Wood)
-   Tardigrade
    -   Fix listing bug by upgrading to v1.0.7
    -   Set UserAgent to rclone (Caleb Case)

v1.52.0 - 2020-05-27

Special thanks to Martin Michlmayr for proof reading and correcting all
the docs and Edward Barker for helping re-write the front page.

See commits

-   New backends
    -   Tardigrade backend for use with storj.io (Caleb Case)
    -   Union re-write to have multiple writable remotes (Max Sum)
    -   Seafile for Seafile server (Fred @creativeprojects)
-   New commands
    -   backend: command for backend-specific commands (see backends)
        (Nick Craig-Wood)
    -   cachestats: Deprecate in favour of rclone backend stats cache:
        (Nick Craig-Wood)
    -   dbhashsum: Deprecate in favour of rclone hashsum DropboxHash
        (Nick Craig-Wood)
-   New Features
    -   Add --header-download and --header-upload flags for setting HTTP
        headers when uploading/downloading (Tim Gallant)
    -   Add --header flag to add HTTP headers to every HTTP transaction
        (Nick Craig-Wood)
    -   Add --check-first to do all checking before starting transfers
        (Nick Craig-Wood)
    -   Add --track-renames-strategy for configurable matching criteria
        for --track-renames (Bernd Schoolmann)
    -   Add --cutoff-mode hard,soft,cautious (Shing Kit Chan & Franklyn
        Tackitt)
    -   Filter flags (e.g. --files-from -) can read from stdin
        (fishbullet)
    -   Add --error-on-no-transfer option (Jon Fautley)
    -   Implement --order-by xxx,mixed for copying some small and some
        big files (Nick Craig-Wood)
    -   Allow --max-backlog to be negative meaning as large as possible
        (Nick Craig-Wood)
    -   Added --no-unicode-normalization flag to allow Unicode filenames
        to remain unique (Ben Zenker)
    -   Allow --min-age/--max-age to take a date as well as a duration
        (Nick Craig-Wood)
    -   Add rename statistics for file and directory renames (Nick
        Craig-Wood)
    -   Add statistics output to JSON log (reddi)
    -   Make stats be printed on non-zero exit code (Nick Craig-Wood)
    -   When running --password-command allow use of stdin (Sébastien
        Gross)
    -   Stop empty strings being a valid remote path (Nick Craig-Wood)
    -   accounting: support WriterTo for less memory copying (Nick
        Craig-Wood)
    -   build
        -   Update to use go1.14 for the build (Nick Craig-Wood)
        -   Add -trimpath to release build for reproduceable builds
            (Nick Craig-Wood)
        -   Remove GOOS and GOARCH from Dockerfile (Brandon Philips)
    -   config
        -   Fsync the config file after writing to save more reliably
            (Nick Craig-Wood)
        -   Add --obscure and --no-obscure flags to config create/update
            (Nick Craig-Wood)
        -   Make config show take remote: as well as remote (Nick
            Craig-Wood)
    -   copyurl: Add --no-clobber flag (Denis)
    -   delete: Added --rmdirs flag to delete directories as well (Kush)
    -   filter: Added --files-from-raw flag (Ankur Gupta)
    -   genautocomplete: Add support for fish shell (Matan Rosenberg)
    -   log: Add support for syslog LOCAL facilities (Patryk Jakuszew)
    -   lsjson: Add --hash-type parameter and use it in lsf to speed up
        hashing (Nick Craig-Wood)
    -   rc
        -   Add -o/--opt and -a/--arg for more structured input (Nick
            Craig-Wood)
        -   Implement backend/command for running backend-specific
            commands remotely (Nick Craig-Wood)
        -   Add mount/mount command for starting rclone mount via the
            API (Chaitanya)
    -   rcd: Add Prometheus metrics support (Gary Kim)
    -   serve http
        -   Added a --template flag for user defined markup (calistri)
        -   Add Last-Modified headers to files and directories (Nick
            Craig-Wood)
    -   serve sftp: Add support for multiple host keys by repeating
        --key flag (Maxime Suret)
    -   touch: Add --localtime flag to make --timestamp localtime not
        UTC (Nick Craig-Wood)
-   Bug Fixes
    -   accounting
        -   Restore "Max number of stats groups reached" log line
            (Michał Matczuk)
        -   Correct exitcode on Transfer Limit Exceeded flag. (Anuar
            Serdaliyev)
        -   Reset bytes read during copy retry (Ankur Gupta)
        -   Fix race clearing stats (Nick Craig-Wood)
    -   copy: Only create empty directories when they don't exist on the
        remote (Ishuah Kariuki)
    -   dedupe: Stop dedupe deleting files with identical IDs (Nick
        Craig-Wood)
    -   oauth
        -   Use custom http client so that --no-check-certificate is
            honored by oauth token fetch (Mark Spieth)
        -   Replace deprecated oauth2.NoContext (Lars Lehtonen)
    -   operations
        -   Fix setting the timestamp on Windows for multithread copy
            (Nick Craig-Wood)
        -   Make rcat obey --ignore-checksum (Nick Craig-Wood)
        -   Make --max-transfer more accurate (Nick Craig-Wood)
    -   rc
        -   Fix dropped error (Lars Lehtonen)
        -   Fix misplaced http server config (Xiaoxing Ye)
        -   Disable duplicate log (ElonH)
    -   serve dlna
        -   Cds: don't specify childCount at all when unknown (Dan
            Walters)
        -   Cds: use modification time as date in dlna metadata (Dan
            Walters)
    -   serve restic: Fix tests after restic project removed vendoring
        (Nick Craig-Wood)
    -   sync
        -   Fix incorrect "nothing to transfer" message using
            --delete-before (Nick Craig-Wood)
        -   Only create empty directories when they don't exist on the
            remote (Ishuah Kariuki)
-   Mount
    -   Add --async-read flag to disable asynchronous reads (Nick
        Craig-Wood)
    -   Ignore --allow-root flag with a warning as it has been removed
        upstream (Nick Craig-Wood)
    -   Warn if --allow-non-empty used on Windows and clarify docs (Nick
        Craig-Wood)
    -   Constrain to go1.13 or above otherwise bazil.org/fuse fails to
        compile (Nick Craig-Wood)
    -   Fix fail because of too long volume name (evileye)
    -   Report 1PB free for unknown disk sizes (Nick Craig-Wood)
    -   Map more rclone errors into file systems errors (Nick
        Craig-Wood)
    -   Fix disappearing cwd problem (Nick Craig-Wood)
    -   Use ReaddirPlus on Windows to improve directory listing
        performance (Nick Craig-Wood)
    -   Send a hint as to whether the filesystem is case insensitive or
        not (Nick Craig-Wood)
    -   Add rc command mount/types (Nick Craig-Wood)
    -   Change maximum leaf name length to 1024 bytes (Nick Craig-Wood)
-   VFS
    -   Add --vfs-read-wait and --vfs-write-wait flags to control time
        waiting for a sequential read/write (Nick Craig-Wood)
    -   Change default --vfs-read-wait to 20ms (it was 5ms and not
        configurable) (Nick Craig-Wood)
    -   Make df output more consistent on a rclone mount. (Yves G)
    -   Report 1PB free for unknown disk sizes (Nick Craig-Wood)
    -   Fix race condition caused by unlocked reading of Dir.path (Nick
        Craig-Wood)
    -   Make File lock and Dir lock not overlap to avoid deadlock (Nick
        Craig-Wood)
    -   Implement lock ordering between File and Dir to eliminate
        deadlocks (Nick Craig-Wood)
    -   Factor the vfs cache into its own package (Nick Craig-Wood)
    -   Pin the Fs in use in the Fs cache (Nick Craig-Wood)
    -   Add SetSys() methods to Node to allow caching stuff on a node
        (Nick Craig-Wood)
    -   Ignore file not found errors from Hash in Read.Release (Nick
        Craig-Wood)
    -   Fix hang in read wait code (Nick Craig-Wood)
-   Local
    -   Speed up multi thread downloads by using sparse files on Windows
        (Nick Craig-Wood)
    -   Implement --local-no-sparse flag for disabling sparse files
        (Nick Craig-Wood)
    -   Implement rclone backend noop for testing purposes (Nick
        Craig-Wood)
    -   Fix "file not found" errors on post transfer Hash calculation
        (Nick Craig-Wood)
-   Cache
    -   Implement rclone backend stats command (Nick Craig-Wood)
    -   Fix Server Side Copy with Temp Upload (Brandon McNama)
    -   Remove Unused Functions (Lars Lehtonen)
    -   Disable race tests until bbolt is fixed (Nick Craig-Wood)
    -   Move methods used for testing into test file (greatroar)
    -   Add Pin and Unpin and canonicalised lookup (Nick Craig-Wood)
    -   Use proper import path go.etcd.io/bbolt (Robert-André Mauchin)
-   Crypt
    -   Calculate hashes for uploads from local disk (Nick Craig-Wood)
        -   This allows encrypted Jottacloud uploads without using local
            disk
        -   This means encrypted s3/b2 uploads will now have hashes
    -   Added rclone backend decode/encode commands to replicate
        functionality of cryptdecode (Anagh Kumar Baranwal)
    -   Get rid of the unused Cipher interface as it obfuscated the code
        (Nick Craig-Wood)
-   Azure Blob
    -   Implement streaming of unknown sized files so rcat is now
        supported (Nick Craig-Wood)
    -   Implement memory pooling to control memory use (Nick Craig-Wood)
    -   Add --azureblob-disable-checksum flag (Nick Craig-Wood)
    -   Retry InvalidBlobOrBlock error as it may indicate block
        concurrency problems (Nick Craig-Wood)
    -   Remove unused Object.parseTimeString() (Lars Lehtonen)
    -   Fix permission error on SAS URL limited to container (Nick
        Craig-Wood)
-   B2
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Ignore directory markers at the root also (Nick Craig-Wood)
    -   Force the case of the SHA1 to lowercase (Nick Craig-Wood)
    -   Remove unused largeUpload.clearUploadURL() (Lars Lehtonen)
-   Box
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Implement About to read size used (Nick Craig-Wood)
    -   Add token renew function for jwt auth (David Bramwell)
    -   Added support for interchangeable root folder for Box backend
        (Sunil Patra)
    -   Remove unnecessary iat from jws claims (David)
-   Drive
    -   Follow shortcuts by default, skip with --drive-skip-shortcuts
        (Nick Craig-Wood)
    -   Implement rclone backend shortcut command for creating shortcuts
        (Nick Craig-Wood)
    -   Added rclone backend command to change service_account_file and
        chunk_size (Anagh Kumar Baranwal)
    -   Fix missing files when using --fast-list and
        --drive-shared-with-me (Nick Craig-Wood)
    -   Fix duplicate items when using --drive-shared-with-me (Nick
        Craig-Wood)
    -   Extend --drive-stop-on-upload-limit to respond to
        teamDriveFileLimitExceeded. (harry)
    -   Don't delete files with multiple parents to avoid data loss
        (Nick Craig-Wood)
    -   Server side copy docs use default description if empty (Nick
        Craig-Wood)
-   Dropbox
    -   Make error insufficient space to be fatal (harry)
    -   Add info about required redirect url (Elan Ruusamäe)
-   Fichier
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Implement custom pacer to deal with the new rate limiting
        (buengese)
-   FTP
    -   Fix lockup when using concurrency limit on failed connections
        (Nick Craig-Wood)
    -   Fix lockup on failed upload when using concurrency limit (Nick
        Craig-Wood)
    -   Fix lockup on Close failures when using concurrency limit (Nick
        Craig-Wood)
    -   Work around pureftp sending spurious 150 messages (Nick
        Craig-Wood)
-   Google Cloud Storage
    -   Add support for --header-upload and --header-download (Nick
        Craig-Wood)
    -   Add ARCHIVE storage class to help (Adam Stroud)
    -   Ignore directory markers at the root (Nick Craig-Wood)
-   Googlephotos
    -   Make the start year configurable (Daven)
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Create feature/favorites directory (Brandon Philips)
    -   Fix "concurrent map write" error (Nick Craig-Wood)
    -   Don't put an image in error message (Nick Craig-Wood)
-   HTTP
    -   Improved directory listing with new template from Caddy project
        (calisro)
-   Jottacloud
    -   Implement --jottacloud-trashed-only (buengese)
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Use RawURLEncoding when decoding base64 encoded login token
        (buengese)
    -   Implement cleanup (buengese)
    -   Update docs regarding cleanup, removed remains from old auth,
        and added warning about special mountpoints. (albertony)
-   Mailru
    -   Describe 2FA requirements (valery1707)
-   Onedrive
    -   Implement --onedrive-server-side-across-configs (Nick
        Craig-Wood)
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Fix occasional 416 errors on multipart uploads (Nick Craig-Wood)
    -   Added maximum chunk size limit warning in the docs (Harry)
    -   Fix missing drive on config (Nick Craig-Wood)
    -   Make error quotaLimitReached to be fatal (harry)
-   Opendrive
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
-   Pcloud
    -   Added support for interchangeable root folder for pCloud backend
        (Sunil Patra)
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Fix initial config "Auth state doesn't match" message (Nick
        Craig-Wood)
-   Premiumizeme
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Prune unused functions (Lars Lehtonen)
-   Putio
    -   Add support for --header-upload and --header-download (Nick
        Craig-Wood)
    -   Make downloading files use the rclone http Client (Nick
        Craig-Wood)
    -   Fix parsing of remotes with leading and trailing / (Nick
        Craig-Wood)
-   Qingstor
    -   Make rclone cleanup remove pending multipart uploads older than
        24h (Nick Craig-Wood)
    -   Try harder to cancel failed multipart uploads (Nick Craig-Wood)
    -   Prune multiUploader.list() (Lars Lehtonen)
    -   Lint fix (Lars Lehtonen)
-   S3
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Use memory pool for buffer allocations (Maciej Zimnoch)
    -   Add SSE-C support for AWS, Ceph, and MinIO (Jack Anderson)
    -   Fail fast multipart upload (Michał Matczuk)
    -   Report errors on bucket creation (mkdir) correctly (Nick
        Craig-Wood)
    -   Specify that Minio supports URL encoding in listings (Nick
        Craig-Wood)
    -   Added 500 as retryErrorCode (Michał Matczuk)
    -   Use --low-level-retries as the number of SDK retries (Aleksandar
        Janković)
    -   Fix multipart abort context (Aleksandar Jankovic)
    -   Replace deprecated session.New() with session.NewSession() (Lars
        Lehtonen)
    -   Use the provided size parameter when allocating a new memory
        pool (Joachim Brandon LeBlanc)
    -   Use rclone's low level retries instead of AWS SDK to fix listing
        retries (Nick Craig-Wood)
    -   Ignore directory markers at the root also (Nick Craig-Wood)
    -   Use single memory pool (Michał Matczuk)
    -   Do not resize buf on put to memBuf (Michał Matczuk)
    -   Improve docs for --s3-disable-checksum (Nick Craig-Wood)
    -   Don't leak memory or tokens in edge cases for multipart upload
        (Nick Craig-Wood)
-   Seafile
    -   Implement 2FA (Fred)
-   SFTP
    -   Added --sftp-pem-key to support inline key files (calisro)
    -   Fix post transfer copies failing with 0 size when using
        set_modtime=false (Nick Craig-Wood)
-   Sharefile
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
-   Sugarsync
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
-   Swift
    -   Add support for --header-upload and --header-download (Nick
        Craig-Wood)
    -   Fix cosmetic issue in error message (Martin Michlmayr)
-   Union
    -   Implement multiple writable remotes (Max Sum)
    -   Fix server-side copy (Max Sum)
    -   Implement ListR (Max Sum)
    -   Enable ListR when upstreams contain local (Max Sum)
-   WebDAV
    -   Add support for --header-upload and --header-download (Tim
        Gallant)
    -   Fix X-OC-Mtime header for Transip compatibility (Nick
        Craig-Wood)
    -   Report full and consistent usage with about (Yves G)
-   Yandex
    -   Add support for --header-upload and --header-download (Tim
        Gallant)

v1.51.0 - 2020-02-01

-   New backends
    -   Memory (Nick Craig-Wood)
    -   Sugarsync (Nick Craig-Wood)
-   New Features
    -   Adjust all backends to have --backend-encoding parameter (Nick
        Craig-Wood)
        -   this enables the encoding for special characters to be
            adjusted or disabled
    -   Add --max-duration flag to control the maximum duration of a
        transfer session (boosh)
    -   Add --expect-continue-timeout flag, default 1s (Nick Craig-Wood)
    -   Add --no-check-dest flag for copying without testing the
        destination (Nick Craig-Wood)
    -   Implement --order-by flag to order transfers (Nick Craig-Wood)
    -   accounting
        -   Don't show entries in both transferring and checking (Nick
            Craig-Wood)
        -   Add option to delete stats (Aleksandar Jankovic)
    -   build
        -   Compress the test builds with gzip (Nick Craig-Wood)
        -   Implement a framework for starting test servers during tests
            (Nick Craig-Wood)
    -   cmd: Always print elapsed time to tenth place seconds in
        progress (Gary Kim)
    -   config
        -   Add --password-command to allow dynamic config password
            (Damon Permezel)
        -   Give config questions default values (Nick Craig-Wood)
        -   Check a remote exists when creating a new one (Nick
            Craig-Wood)
    -   copyurl: Add --stdout flag to write to stdout (Nick Craig-Wood)
    -   dedupe: Implement keep smallest too (Nick Craig-Wood)
    -   hashsum: Add flag --base64 flag (landall)
    -   lsf: Speed up on s3/swift/etc by not reading mimetype by default
        (Nick Craig-Wood)
    -   lsjson: Add --no-mimetype flag (Nick Craig-Wood)
    -   rc: Add methods to turn on blocking and mutex profiling (Nick
        Craig-Wood)
    -   rcd
        -   Adding group parameter to stats (Chaitanya)
        -   Move webgui apart; option to disable browser (Xiaoxing Ye)
    -   serve sftp: Add support for public key with auth proxy (Paul
        Tinsley)
    -   stats: Show deletes in stats and hide zero stats (anuar45)
-   Bug Fixes
    -   accounting
        -   Fix error counter counting multiple times (Ankur Gupta)
        -   Fix error count shown as checks (Cnly)
        -   Clear finished transfer in stats-reset (Maciej Zimnoch)
        -   Added StatsInfo locking in statsGroups sum function (Michał
            Matczuk)
    -   asyncreader: Fix EOF error (buengese)
    -   check: Fix --one-way recursing more directories than it needs to
        (Nick Craig-Wood)
    -   chunkedreader: Disable hash calculation for first segment (Nick
        Craig-Wood)
    -   config
        -   Do not open browser on headless on drive/gcs/google photos
            (Xiaoxing Ye)
        -   SetValueAndSave ignore error if config section does not
            exist yet (buengese)
    -   cmd: Fix completion with an encrypted config (Danil Semelenov)
    -   dbhashsum: Stop it returning UNSUPPORTED on dropbox (Nick
        Craig-Wood)
    -   dedupe: Add missing modes to help string (Nick Craig-Wood)
    -   operations
        -   Fix dedupe continuing on errors like
            insufficientFilePersimmon (SezalAgrawal)
        -   Clear accounting before low level retry (Maciej Zimnoch)
        -   Write debug message when hashes could not be checked (Ole
            Schütt)
        -   Move interface assertion to tests to remove pflag dependency
            (Nick Craig-Wood)
        -   Make NewOverrideObjectInfo public and factor uses (Nick
            Craig-Wood)
    -   proxy: Replace use of bcrypt with sha256 (Nick Craig-Wood)
    -   vendor
        -   Update bazil.org/fuse to fix FreeBSD 12.1 (Nick Craig-Wood)
        -   Update github.com/t3rm1n4l/go-mega to fix mega "illegal
            base64 data at input byte 22" (Nick Craig-Wood)
        -   Update termbox-go to fix ncdu command on FreeBSD (Kuang-che
            Wu)
        -   Update t3rm1n4l/go-mega - fixes mega: couldn't login:
            crypto/aes: invalid key size 0 (Nick Craig-Wood)
-   Mount
    -   Enable async reads for a 20% speedup (Nick Craig-Wood)
    -   Replace use of WriteAt with Write for cache mode >= writes and
        O_APPEND (Brett Dutro)
    -   Make sure we call unmount when exiting (Nick Craig-Wood)
    -   Don't build on go1.10 as bazil/fuse no longer supports it (Nick
        Craig-Wood)
    -   When setting dates discard out of range dates (Nick Craig-Wood)
-   VFS
    -   Add a newly created file straight into the directory (Nick
        Craig-Wood)
    -   Only calculate one hash for reads for a speedup (Nick
        Craig-Wood)
    -   Make ReadAt for non cached files work better with non-sequential
        reads (Nick Craig-Wood)
    -   Fix edge cases when reading ModTime from file (Nick Craig-Wood)
    -   Make sure existing files opened for write show correct size
        (Nick Craig-Wood)
    -   Don't cache the path in RW file objects to fix renaming (Nick
        Craig-Wood)
    -   Fix rename of open files when using the VFS cache (Nick
        Craig-Wood)
    -   When renaming files in the cache, rename the cache item in
        memory too (Nick Craig-Wood)
    -   Fix open file renaming on drive when using
        --vfs-cache-mode writes (Nick Craig-Wood)
    -   Fix incorrect modtime for mv into mount with
        --vfs-cache-modes writes (Nick Craig-Wood)
    -   On rename, rename in cache too if the file exists (Anagh Kumar
        Baranwal)
-   Local
    -   Make source file being updated errors be NoLowLevelRetry errors
        (Nick Craig-Wood)
    -   Fix update of hidden files on Windows (Nick Craig-Wood)
-   Cache
    -   Follow move of upstream library github.com/coreos/bbolt
        github.com/etcd-io/bbolt (Nick Craig-Wood)
    -   Fix fatal error: concurrent map writes (Nick Craig-Wood)
-   Crypt
    -   Reorder the filename encryption options (Thomas Eales)
    -   Correctly handle trailing dot (buengese)
-   Chunker
    -   Reduce length of temporary suffix (Ivan Andreev)
-   Drive
    -   Add --drive-stop-on-upload-limit flag to stop syncs when upload
        limit reached (Nick Craig-Wood)
    -   Add --drive-use-shared-date to use date file was shared instead
        of modified date (Garry McNulty)
    -   Make sure invalid auth for teamdrives always reports an error
        (Nick Craig-Wood)
    -   Fix --fast-list when using appDataFolder (Nick Craig-Wood)
    -   Use multipart resumable uploads for streaming and uploads in
        mount (Nick Craig-Wood)
    -   Log an ERROR if an incomplete search is returned (Nick
        Craig-Wood)
    -   Hide dangerous config from the configurator (Nick Craig-Wood)
-   Dropbox
    -   Treat insufficient_space errors as non retriable errors (Nick
        Craig-Wood)
-   Jottacloud
    -   Use new auth method used by official client (buengese)
    -   Add URL to generate Login Token to config wizard (Nick
        Craig-Wood)
    -   Add support whitelabel versions (buengese)
-   Koofr
    -   Use rclone HTTP client. (jaKa)
-   Onedrive
    -   Add Sites.Read.All permission (Benjamin Richter)
    -   Add support "Retry-After" header (Motonori IWAMURO)
-   Opendrive
    -   Implement --opendrive-chunk-size (Nick Craig-Wood)
-   S3
    -   Re-implement multipart upload to fix memory issues (Nick
        Craig-Wood)
    -   Add --s3-copy-cutoff for size to switch to multipart copy (Nick
        Craig-Wood)
    -   Add new region Asia Pacific (Hong Kong) (Outvi V)
    -   Reduce memory usage streaming files by reducing max stream
        upload size (Nick Craig-Wood)
    -   Add --s3-list-chunk option for bucket listing (Thomas
        Kriechbaumer)
    -   Force path style bucket access to off for AWS deprecation (Nick
        Craig-Wood)
    -   Use AWS web identity role provider if available (Tennix)
    -   Add StackPath Object Storage Support (Dave Koston)
    -   Fix ExpiryWindow value (Aleksandar Jankovic)
    -   Fix DisableChecksum condition (Aleksandar Janković)
    -   Fix URL decoding of NextMarker (Nick Craig-Wood)
-   SFTP
    -   Add --sftp-skip-links to skip symlinks and non regular files
        (Nick Craig-Wood)
    -   Retry Creation of Connection (Sebastian Brandt)
    -   Fix "failed to parse private key file: ssh: not an encrypted
        key" error (Nick Craig-Wood)
    -   Open files for update write only to fix AWS SFTP interop (Nick
        Craig-Wood)
-   Swift
    -   Reserve segments of dynamic large object when delete objects in
        container what was enabled versioning. (Nguyễn Hữu Luân)
    -   Fix parsing of X-Object-Manifest (Nick Craig-Wood)
    -   Update OVH API endpoint (unbelauscht)
-   WebDAV
    -   Make nextcloud only upload SHA1 checksums (Nick Craig-Wood)
    -   Fix case of "Bearer" in Authorization: header to agree with RFC
        (Nick Craig-Wood)
    -   Add Referer header to fix problems with WAFs (Nick Craig-Wood)

v1.50.2 - 2019-11-19

-   Bug Fixes
    -   accounting: Fix memory leak on retries operations (Nick
        Craig-Wood)
-   Drive
    -   Fix listing of the root directory with drive.files scope (Nick
        Craig-Wood)
    -   Fix --drive-root-folder-id with team/shared drives (Nick
        Craig-Wood)

v1.50.1 - 2019-11-02

-   Bug Fixes
    -   hash: Fix accidentally changed hash names for DropboxHash and
        CRC-32 (Nick Craig-Wood)
    -   fshttp: Fix error reporting on tpslimit token bucket errors
        (Nick Craig-Wood)
    -   fshttp: Don't print token bucket errors on context cancelled
        (Nick Craig-Wood)
-   Local
    -   Fix listings of . on Windows (Nick Craig-Wood)
-   Onedrive
    -   Fix DirMove/Move after Onedrive change (Xiaoxing Ye)

v1.50.0 - 2019-10-26

-   New backends
    -   Citrix Sharefile (Nick Craig-Wood)
    -   Chunker - an overlay backend to split files into smaller parts
        (Ivan Andreev)
    -   Mail.ru Cloud (Ivan Andreev)
-   New Features
    -   encodings (Fabian Möller & Nick Craig-Wood)
        -   All backends now use file name encoding to ensure any file
            name can be written to any backend.
        -   See the restricted file name docs for more info and the
            local backend docs.
        -   Some file names may look different in rclone if you are
            using any control characters in names or unicode FULLWIDTH
            symbols.
    -   build
        -   Update to use go1.13 for the build (Nick Craig-Wood)
        -   Drop support for go1.9 (Nick Craig-Wood)
        -   Build rclone with GitHub actions (Nick Craig-Wood)
        -   Convert python scripts to python3 (Nick Craig-Wood)
        -   Swap Azure/go-ansiterm for mattn/go-colorable (Nick
            Craig-Wood)
        -   Dockerfile fixes (Matei David)
        -   Add plugin support for backends and commands (Richard Patel)
    -   config
        -   Use alternating Red/Green in config to make more obvious
            (Nick Craig-Wood)
    -   contrib
        -   Add sample DLNA server Docker Compose manifest. (pataquets)
        -   Add sample WebDAV server Docker Compose manifest.
            (pataquets)
    -   copyurl
        -   Add --auto-filename flag for using file name from URL in
            destination path (Denis)
    -   serve dlna:
        -   Many compatibility improvements (Dan Walters)
        -   Support for external srt subtitles (Dan Walters)
    -   rc
        -   Added command core/quit (Saksham Khanna)
-   Bug Fixes
    -   sync
        -   Make --update/-u not transfer files that haven't changed
            (Nick Craig-Wood)
        -   Free objects after they come out of the transfer pipe to
            save memory (Nick Craig-Wood)
        -   Fix --files-from without --no-traverse doing a recursive
            scan (Nick Craig-Wood)
    -   operations
        -   Fix accounting for server-side copies (Nick Craig-Wood)
        -   Display 'All duplicates removed' only if dedupe successful
            (Sezal Agrawal)
        -   Display 'Deleted X extra copies' only if dedupe successful
            (Sezal Agrawal)
    -   accounting
        -   Only allow up to 100 completed transfers in the accounting
            list to save memory (Nick Craig-Wood)
        -   Cull the old time ranges when possible to save memory (Nick
            Craig-Wood)
        -   Fix panic due to server-side copy fallback (Ivan Andreev)
        -   Fix memory leak noticeable for transfers of large numbers of
            objects (Nick Craig-Wood)
        -   Fix total duration calculation (Nick Craig-Wood)
    -   cmd
        -   Fix environment variables not setting command line flags
            (Nick Craig-Wood)
        -   Make autocomplete compatible with bash's posix mode for
            macOS (Danil Semelenov)
        -   Make --progress work in git bash on Windows (Nick
            Craig-Wood)
        -   Fix 'compopt: command not found' on autocomplete on macOS
            (Danil Semelenov)
    -   config
        -   Fix setting of non top level flags from environment
            variables (Nick Craig-Wood)
        -   Check config names more carefully and report errors (Nick
            Craig-Wood)
        -   Remove error: can't use --size-only and --ignore-size
            together. (Nick Craig-Wood)
    -   filter: Prevent mixing options when --files-from is in use
        (Michele Caci)
    -   serve sftp: Fix crash on unsupported operations (e.g. Readlink)
        (Nick Craig-Wood)
-   Mount
    -   Allow files of unknown size to be read properly (Nick
        Craig-Wood)
    -   Skip tests on <= 2 CPUs to avoid lockup (Nick Craig-Wood)
    -   Fix panic on File.Open (Nick Craig-Wood)
    -   Fix "mount_fusefs: -o timeout=: option not supported" on FreeBSD
        (Nick Craig-Wood)
    -   Don't pass huge filenames (>4k) to FUSE as it can't cope (Nick
        Craig-Wood)
-   VFS
    -   Add flag --vfs-case-insensitive for windows/macOS mounts (Ivan
        Andreev)
    -   Make objects of unknown size readable through the VFS (Nick
        Craig-Wood)
    -   Move writeback of dirty data out of close() method into its own
        method (FlushWrites) and remove close() call from Flush() (Brett
        Dutro)
    -   Stop empty dirs disappearing when renamed on bucket-based
        remotes (Nick Craig-Wood)
    -   Stop change notify polling clearing so much of the directory
        cache (Nick Craig-Wood)
-   Azure Blob
    -   Disable logging to the Windows event log (Nick Craig-Wood)
-   B2
    -   Remove unverified: prefix on sha1 to improve interop (e.g. with
        CyberDuck) (Nick Craig-Wood)
-   Box
    -   Add options to get access token via JWT auth (David)
-   Drive
    -   Disable HTTP/2 by default to work around INTERNAL_ERROR problems
        (Nick Craig-Wood)
    -   Make sure that drive root ID is always canonical (Nick
        Craig-Wood)
    -   Fix --drive-shared-with-me from the root with lsand --fast-list
        (Nick Craig-Wood)
    -   Fix ChangeNotify polling for shared drives (Nick Craig-Wood)
    -   Fix change notify polling when using appDataFolder (Nick
        Craig-Wood)
-   Dropbox
    -   Make disallowed filenames errors not retry (Nick Craig-Wood)
    -   Fix nil pointer exception on restricted files (Nick Craig-Wood)
-   Fichier
    -   Fix accessing files > 2GB on 32 bit systems (Nick Craig-Wood)
-   FTP
    -   Allow disabling EPSV mode (Jon Fautley)
-   HTTP
    -   HEAD directory entries in parallel to speedup (Nick Craig-Wood)
    -   Add --http-no-head to stop rclone doing HEAD in listings (Nick
        Craig-Wood)
-   Putio
    -   Add ability to resume uploads (Cenk Alti)
-   S3
    -   Fix signature v2_auth headers (Anthony Rusdi)
    -   Fix encoding for control characters (Nick Craig-Wood)
    -   Only ask for URL encoded directory listings if we need them on
        Ceph (Nick Craig-Wood)
    -   Add option for multipart failure behaviour (Aleksandar Jankovic)
    -   Support for multipart copy (庄天翼)
    -   Fix nil pointer reference if no metadata returned for object
        (Nick Craig-Wood)
-   SFTP
    -   Fix --sftp-ask-password trying to contact the ssh agent (Nick
        Craig-Wood)
    -   Fix hashes of files with backslashes (Nick Craig-Wood)
    -   Include more ciphers with --sftp-use-insecure-cipher (Carlos
        Ferreyra)
-   WebDAV
    -   Parse and return Sharepoint error response (Henning Surmeier)

v1.49.5 - 2019-10-05

-   Bug Fixes
    -   Revert back to go1.12.x for the v1.49.x builds as go1.13.x was
        causing issues (Nick Craig-Wood)
    -   Fix rpm packages by using master builds of nfpm (Nick
        Craig-Wood)
    -   Fix macOS build after brew changes (Nick Craig-Wood)

v1.49.4 - 2019-09-29

-   Bug Fixes
    -   cmd/rcd: Address ZipSlip vulnerability (Richard Patel)
    -   accounting: Fix file handle leak on errors (Nick Craig-Wood)
    -   oauthutil: Fix security problem when running with two users on
        the same machine (Nick Craig-Wood)
-   FTP
    -   Fix listing of an empty root returning: error dir not found
        (Nick Craig-Wood)
-   S3
    -   Fix SetModTime on GLACIER/ARCHIVE objects and implement set/get
        tier (Nick Craig-Wood)

v1.49.3 - 2019-09-15

-   Bug Fixes
    -   accounting
        -   Fix total duration calculation (Aleksandar Jankovic)
        -   Fix "file already closed" on transfer retries (Nick
            Craig-Wood)

v1.49.2 - 2019-09-08

-   New Features
    -   build: Add Docker workflow support (Alfonso Montero)
-   Bug Fixes
    -   accounting: Fix locking in Transfer to avoid deadlock with
        --progress (Nick Craig-Wood)
    -   docs: Fix template argument for mktemp in install.sh (Cnly)
    -   operations: Fix -u/--update with google photos / files of
        unknown size (Nick Craig-Wood)
    -   rc: Fix docs for config/create /update /password (Nick
        Craig-Wood)
-   Google Cloud Storage
    -   Fix need for elevated permissions on SetModTime (Nick
        Craig-Wood)

v1.49.1 - 2019-08-28

-   Bug Fixes
    -   config: Fix generated passwords being stored as empty password
        (Nick Craig-Wood)
    -   rcd: Added missing parameter for web-gui info logs. (Chaitanya)
-   Googlephotos
    -   Fix crash on error response (Nick Craig-Wood)
-   Onedrive
    -   Fix crash on error response (Nick Craig-Wood)

v1.49.0 - 2019-08-26

-   New backends
    -   1fichier (Laura Hausmann)
    -   Google Photos (Nick Craig-Wood)
    -   Putio (Cenk Alti)
    -   premiumize.me (Nick Craig-Wood)
-   New Features
    -   Experimental web GUI (Chaitanya Bankanhal)
    -   Implement --compare-dest & --copy-dest (yparitcher)
    -   Implement --suffix without --backup-dir for backup to current
        dir (yparitcher)
    -   config reconnect to re-login (re-run the oauth login) for the
        backend. (Nick Craig-Wood)
    -   config userinfo to discover which user you are logged in as.
        (Nick Craig-Wood)
    -   config disconnect to disconnect you (log out) from the backend.
        (Nick Craig-Wood)
    -   Add --use-json-log for JSON logging (justinalin)
    -   Add context propagation to rclone (Aleksandar Jankovic)
    -   Reworking internal statistics interfaces so they work with rc
        jobs (Aleksandar Jankovic)
    -   Add Higher units for ETA (AbelThar)
    -   Update rclone logos to new design (Andreas Chlupka)
    -   hash: Add CRC-32 support (Cenk Alti)
    -   help showbackend: Fixed advanced option category when there are
        no standard options (buengese)
    -   ncdu: Display/Copy to Clipboard Current Path (Gary Kim)
    -   operations:
        -   Run hashing operations in parallel (Nick Craig-Wood)
        -   Don't calculate checksums when using --ignore-checksum (Nick
            Craig-Wood)
        -   Check transfer hashes when using --size-only mode (Nick
            Craig-Wood)
        -   Disable multi thread copy for local to local copies (Nick
            Craig-Wood)
        -   Debug successful hashes as well as failures (Nick
            Craig-Wood)
    -   rc
        -   Add ability to stop async jobs (Aleksandar Jankovic)
        -   Return current settings if core/bwlimit called without
            parameters (Nick Craig-Wood)
        -   Rclone-WebUI integration with rclone (Chaitanya Bankanhal)
        -   Added command line parameter to control the cross origin
            resource sharing (CORS) in the rcd. (Security Improvement)
            (Chaitanya Bankanhal)
        -   Add anchor tags to the docs so links are consistent (Nick
            Craig-Wood)
        -   Remove _async key from input parameters after parsing so
            later operations won't get confused (buengese)
        -   Add call to clear stats (Aleksandar Jankovic)
    -   rcd
        -   Auto-login for web-gui (Chaitanya Bankanhal)
        -   Implement --baseurl for rcd and web-gui (Chaitanya
            Bankanhal)
    -   serve dlna
        -   Only select interfaces which can multicast for SSDP (Nick
            Craig-Wood)
        -   Add more builtin mime types to cover standard audio/video
            (Nick Craig-Wood)
        -   Fix missing mime types on Android causing missing videos
            (Nick Craig-Wood)
    -   serve ftp
        -   Refactor to bring into line with other serve commands (Nick
            Craig-Wood)
        -   Implement --auth-proxy (Nick Craig-Wood)
    -   serve http: Implement --baseurl (Nick Craig-Wood)
    -   serve restic: Implement --baseurl (Nick Craig-Wood)
    -   serve sftp
        -   Implement auth proxy (Nick Craig-Wood)
        -   Fix detection of whether server is authorized (Nick
            Craig-Wood)
    -   serve webdav
        -   Implement --baseurl (Nick Craig-Wood)
        -   Support --auth-proxy (Nick Craig-Wood)
-   Bug Fixes
    -   Make "bad record MAC" a retriable error (Nick Craig-Wood)
    -   copyurl: Fix copying files that return HTTP errors (Nick
        Craig-Wood)
    -   march: Fix checking sub-directories when using --no-traverse
        (buengese)
    -   rc
        -   Fix unmarshalable http.AuthFn in options and put in test for
            marshalability (Nick Craig-Wood)
        -   Move job expire flags to rc to fix initialization problem
            (Nick Craig-Wood)
        -   Fix --loopback with rc/list and others (Nick Craig-Wood)
    -   rcat: Fix slowdown on systems with multiple hashes (Nick
        Craig-Wood)
    -   rcd: Fix permissions problems on cache directory with web gui
        download (Nick Craig-Wood)
-   Mount
    -   Default --daemon-timeout to 15 minutes on macOS and FreeBSD
        (Nick Craig-Wood)
    -   Update docs to show mounting from root OK for bucket-based (Nick
        Craig-Wood)
    -   Remove nonseekable flag from write files (Nick Craig-Wood)
-   VFS
    -   Make write without cache more efficient (Nick Craig-Wood)
    -   Fix --vfs-cache-mode minimal and writes ignoring cached files
        (Nick Craig-Wood)
-   Local
    -   Add --local-case-sensitive and --local-case-insensitive (Nick
        Craig-Wood)
    -   Avoid polluting page cache when uploading local files to remote
        backends (Michał Matczuk)
    -   Don't calculate any hashes by default (Nick Craig-Wood)
    -   Fadvise run syscall on a dedicated go routine (Michał Matczuk)
-   Azure Blob
    -   Azure Storage Emulator support (Sandeep)
    -   Updated config help details to remove connection string
        references (Sandeep)
    -   Make all operations work from the root (Nick Craig-Wood)
-   B2
    -   Implement link sharing (yparitcher)
    -   Enable server-side copy to copy between buckets (Nick
        Craig-Wood)
    -   Make all operations work from the root (Nick Craig-Wood)
-   Drive
    -   Fix server-side copy of big files (Nick Craig-Wood)
    -   Update API for teamdrive use (Nick Craig-Wood)
    -   Add error for purge with --drive-trashed-only (ginvine)
-   Fichier
    -   Make FolderID int and adjust related code (buengese)
-   Google Cloud Storage
    -   Reduce oauth scope requested as suggested by Google (Nick
        Craig-Wood)
    -   Make all operations work from the root (Nick Craig-Wood)
-   HTTP
    -   Add --http-headers flag for setting arbitrary headers (Nick
        Craig-Wood)
-   Jottacloud
    -   Use new api for retrieving internal username (buengese)
    -   Refactor configuration and minor cleanup (buengese)
-   Koofr
    -   Support setting modification times on Koofr backend. (jaKa)
-   Opendrive
    -   Refactor to use existing lib/rest facilities for uploads (Nick
        Craig-Wood)
-   Qingstor
    -   Upgrade to v3 SDK and fix listing loop (Nick Craig-Wood)
    -   Make all operations work from the root (Nick Craig-Wood)
-   S3
    -   Add INTELLIGENT_TIERING storage class (Matti Niemenmaa)
    -   Make all operations work from the root (Nick Craig-Wood)
-   SFTP
    -   Add missing interface check and fix About (Nick Craig-Wood)
    -   Completely ignore all modtime checks if SetModTime=false (Jon
        Fautley)
    -   Support md5/sha1 with rsync.net (Nick Craig-Wood)
    -   Save the md5/sha1 command in use to the config file for
        efficiency (Nick Craig-Wood)
    -   Opt-in support for diffie-hellman-group-exchange-sha256
        diffie-hellman-group-exchange-sha1 (Yi FU)
-   Swift
    -   Use FixRangeOption to fix 0 length files via the VFS (Nick
        Craig-Wood)
    -   Fix upload when using no_chunk to return the correct size (Nick
        Craig-Wood)
    -   Make all operations work from the root (Nick Craig-Wood)
    -   Fix segments leak during failed large file uploads.
        (nguyenhuuluan434)
-   WebDAV
    -   Add --webdav-bearer-token-command (Nick Craig-Wood)
    -   Refresh token when it expires with --webdav-bearer-token-command
        (Nick Craig-Wood)
    -   Add docs for using bearer_token_command with oidc-agent (Paul
        Millar)

v1.48.0 - 2019-06-15

-   New commands
    -   serve sftp: Serve an rclone remote over SFTP (Nick Craig-Wood)
-   New Features
    -   Multi threaded downloads to local storage (Nick Craig-Wood)
        -   controlled with --multi-thread-cutoff and
            --multi-thread-streams
    -   Use rclone.conf from rclone executable directory to enable
        portable use (albertony)
    -   Allow sync of a file and a directory with the same name
        (forgems)
        -   this is common on bucket-based remotes, e.g. s3, gcs
    -   Add --ignore-case-sync for forced case insensitivity (garry415)
    -   Implement --stats-one-line-date and --stats-one-line-date-format
        (Peter Berbec)
    -   Log an ERROR for all commands which exit with non-zero status
        (Nick Craig-Wood)
    -   Use go-homedir to read the home directory more reliably (Nick
        Craig-Wood)
    -   Enable creating encrypted config through external script
        invocation (Wojciech Smigielski)
    -   build: Drop support for go1.8 (Nick Craig-Wood)
    -   config: Make config create/update encrypt passwords where
        necessary (Nick Craig-Wood)
    -   copyurl: Honor --no-check-certificate (Stefan Breunig)
    -   install: Linux skip man pages if no mandb (didil)
    -   lsf: Support showing the Tier of the object (Nick Craig-Wood)
    -   lsjson
        -   Added EncryptedPath to output (calisro)
        -   Support showing the Tier of the object (Nick Craig-Wood)
        -   Add IsBucket field for bucket-based remote listing of the
            root (Nick Craig-Wood)
    -   rc
        -   Add --loopback flag to run commands directly without a
            server (Nick Craig-Wood)
        -   Add operations/fsinfo: Return information about the remote
            (Nick Craig-Wood)
        -   Skip auth for OPTIONS request (Nick Craig-Wood)
        -   cmd/providers: Add DefaultStr, ValueStr and Type fields
            (Nick Craig-Wood)
        -   jobs: Make job expiry timeouts configurable (Aleksandar
            Jankovic)
    -   serve dlna reworked and improved (Dan Walters)
    -   serve ftp: add --ftp-public-ip flag to specify public IP
        (calistri)
    -   serve restic: Add support for --private-repos in serve restic
        (Florian Apolloner)
    -   serve webdav: Combine serve webdav and serve http (Gary Kim)
    -   size: Ignore negative sizes when calculating total (Garry
        McNulty)
-   Bug Fixes
    -   Make move and copy individual files obey --backup-dir (Nick
        Craig-Wood)
    -   If --ignore-checksum is in effect, don't calculate checksum
        (Nick Craig-Wood)
    -   moveto: Fix case-insensitive same remote move (Gary Kim)
    -   rc: Fix serving bucket-based objects with --rc-serve (Nick
        Craig-Wood)
    -   serve webdav: Fix serveDir not being updated with changes from
        webdav (Gary Kim)
-   Mount
    -   Fix poll interval documentation (Animosity022)
-   VFS
    -   Make WriteAt for non cached files work with non-sequential
        writes (Nick Craig-Wood)
-   Local
    -   Only calculate the required hashes for big speedup (Nick
        Craig-Wood)
    -   Log errors when listing instead of returning an error (Nick
        Craig-Wood)
    -   Fix preallocate warning on Linux with ZFS (Nick Craig-Wood)
-   Crypt
    -   Make rclone dedupe work through crypt (Nick Craig-Wood)
    -   Fix wrapping of ChangeNotify to decrypt directories properly
        (Nick Craig-Wood)
    -   Support PublicLink (rclone link) of underlying backend (Nick
        Craig-Wood)
    -   Implement Optional methods SetTier, GetTier (Nick Craig-Wood)
-   B2
    -   Implement server-side copy (Nick Craig-Wood)
    -   Implement SetModTime (Nick Craig-Wood)
-   Drive
    -   Fix move and copy from TeamDrive to GDrive (Fionera)
    -   Add notes that cleanup works in the background on drive (Nick
        Craig-Wood)
    -   Add --drive-server-side-across-configs to default back to old
        server-side copy semantics by default (Nick Craig-Wood)
    -   Add --drive-size-as-quota to show storage quota usage for file
        size (Garry McNulty)
-   FTP
    -   Add FTP List timeout (Jeff Quinn)
    -   Add FTP over TLS support (Gary Kim)
    -   Add --ftp-no-check-certificate option for FTPS (Gary Kim)
-   Google Cloud Storage
    -   Fix upload errors when uploading pre 1970 files (Nick
        Craig-Wood)
-   Jottacloud
    -   Add support for selecting device and mountpoint. (buengese)
-   Mega
    -   Add cleanup support (Gary Kim)
-   Onedrive
    -   More accurately check if root is found (Cnly)
-   S3
    -   Support S3 Accelerated endpoints with
        --s3-use-accelerate-endpoint (Nick Craig-Wood)
    -   Add config info for Wasabi's EU Central endpoint (Robert Marko)
    -   Make SetModTime work for GLACIER while syncing (Philip Harvey)
-   SFTP
    -   Add About support (Gary Kim)
    -   Fix about parsing of df results so it can cope with -ve results
        (Nick Craig-Wood)
    -   Send custom client version and debug server version (Nick
        Craig-Wood)
-   WebDAV
    -   Retry on 423 Locked errors (Nick Craig-Wood)

v1.47.0 - 2019-04-13

-   New backends
    -   Backend for Koofr cloud storage service. (jaKa)
-   New Features
    -   Resume downloads if the reader fails in copy (Nick Craig-Wood)
        -   this means rclone will restart transfers if the source has
            an error
        -   this is most useful for downloads or cloud to cloud copies
    -   Use --fast-list for listing operations where it won't use more
        memory (Nick Craig-Wood)
        -   this should speed up the following operations on remotes
            which support ListR
        -   dedupe, serve restic lsf, ls, lsl, lsjson, lsd, md5sum,
            sha1sum, hashsum, size, delete, cat, settier
        -   use --disable ListR to get old behaviour if required
    -   Make --files-from traverse the destination unless --no-traverse
        is set (Nick Craig-Wood)
        -   this fixes --files-from with Google drive and excessive API
            use in general.
    -   Make server-side copy account bytes and obey --max-transfer
        (Nick Craig-Wood)
    -   Add --create-empty-src-dirs flag and default to not creating
        empty dirs (ishuah)
    -   Add client side TLS/SSL flags
        --ca-cert/--client-cert/--client-key (Nick Craig-Wood)
    -   Implement --suffix-keep-extension for use with --suffix (Nick
        Craig-Wood)
    -   build:
        -   Switch to semver compliant version tags to be go modules
            compliant (Nick Craig-Wood)
        -   Update to use go1.12.x for the build (Nick Craig-Wood)
    -   serve dlna: Add connection manager service description to
        improve compatibility (Dan Walters)
    -   lsf: Add 'e' format to show encrypted names and 'o' for original
        IDs (Nick Craig-Wood)
    -   lsjson: Added --files-only and --dirs-only flags (calistri)
    -   rc: Implement operations/publiclink the equivalent of
        rclone link (Nick Craig-Wood)
-   Bug Fixes
    -   accounting: Fix total ETA when --stats-unit bits is in effect
        (Nick Craig-Wood)
    -   Bash TAB completion
        -   Use private custom func to fix clash between rclone and
            kubectl (Nick Craig-Wood)
        -   Fix for remotes with underscores in their names (Six)
        -   Fix completion of remotes (Florian Gamböck)
        -   Fix autocompletion of remote paths with spaces (Danil
            Semelenov)
    -   serve dlna: Fix root XML service descriptor (Dan Walters)
    -   ncdu: Fix display corruption with Chinese characters (Nick
        Craig-Wood)
    -   Add SIGTERM to signals which run the exit handlers on unix (Nick
        Craig-Wood)
    -   rc: Reload filter when the options are set via the rc (Nick
        Craig-Wood)
-   VFS / Mount
    -   Fix FreeBSD: Ignore Truncate if called with no readers and
        already the correct size (Nick Craig-Wood)
    -   Read directory and check for a file before mkdir (Nick
        Craig-Wood)
    -   Shorten the locking window for vfs/refresh (Nick Craig-Wood)
-   Azure Blob
    -   Enable MD5 checksums when uploading files bigger than the
        "Cutoff" (Dr.Rx)
    -   Fix SAS URL support (Nick Craig-Wood)
-   B2
    -   Allow manual configuration of backblaze downloadUrl (Vince)
    -   Ignore already_hidden error on remove (Nick Craig-Wood)
    -   Ignore malformed src_last_modified_millis (Nick Craig-Wood)
-   Drive
    -   Add --skip-checksum-gphotos to ignore incorrect checksums on
        Google Photos (Nick Craig-Wood)
    -   Allow server-side move/copy between different remotes. (Fionera)
    -   Add docs on team drives and --fast-list eventual consistency
        (Nestar47)
    -   Fix imports of text files (Nick Craig-Wood)
    -   Fix range requests on 0 length files (Nick Craig-Wood)
    -   Fix creation of duplicates with server-side copy (Nick
        Craig-Wood)
-   Dropbox
    -   Retry blank errors to fix long listings (Nick Craig-Wood)
-   FTP
    -   Add --ftp-concurrency to limit maximum number of connections
        (Nick Craig-Wood)
-   Google Cloud Storage
    -   Fall back to default application credentials (marcintustin)
    -   Allow bucket policy only buckets (Nick Craig-Wood)
-   HTTP
    -   Add --http-no-slash for websites with directories with no
        slashes (Nick Craig-Wood)
    -   Remove duplicates from listings (Nick Craig-Wood)
    -   Fix socket leak on 404 errors (Nick Craig-Wood)
-   Jottacloud
    -   Fix token refresh (Sebastian Bünger)
    -   Add device registration (Oliver Heyme)
-   Onedrive
    -   Implement graceful cancel of multipart uploads if rclone is
        interrupted (Cnly)
    -   Always add trailing colon to path when addressing items, (Cnly)
    -   Return errors instead of panic for invalid uploads (Fabian
        Möller)
-   S3
    -   Add support for "Glacier Deep Archive" storage class (Manu)
    -   Update Dreamhost endpoint (Nick Craig-Wood)
    -   Note incompatibility with CEPH Jewel (Nick Craig-Wood)
-   SFTP
    -   Allow custom ssh client config (Alexandru Bumbacea)
-   Swift
    -   Obey Retry-After to enable OVH restore from cold storage (Nick
        Craig-Wood)
    -   Work around token expiry on CEPH (Nick Craig-Wood)
-   WebDAV
    -   Allow IsCollection property to be integer or boolean (Nick
        Craig-Wood)
    -   Fix race when creating directories (Nick Craig-Wood)
    -   Fix About/df when reading the available/total returns 0 (Nick
        Craig-Wood)

v1.46 - 2019-02-09

-   New backends
    -   Support Alibaba Cloud (Aliyun) OSS via the s3 backend (Nick
        Craig-Wood)
-   New commands
    -   serve dlna: serves a remove via DLNA for the local network
        (nicolov)
-   New Features
    -   copy, move: Restore deprecated --no-traverse flag (Nick
        Craig-Wood)
        -   This is useful for when transferring a small number of files
            into a large destination
    -   genautocomplete: Add remote path completion for bash completion
        (Christopher Peterson & Danil Semelenov)
    -   Buffer memory handling reworked to return memory to the OS
        better (Nick Craig-Wood)
        -   Buffer recycling library to replace sync.Pool
        -   Optionally use memory mapped memory for better memory
            shrinking
        -   Enable with --use-mmap if having memory problems - not
            default yet
    -   Parallelise reading of files specified by --files-from (Nick
        Craig-Wood)
    -   check: Add stats showing total files matched. (Dario Guzik)
    -   Allow rename/delete open files under Windows (Nick Craig-Wood)
    -   lsjson: Use exactly the correct number of decimal places in the
        seconds (Nick Craig-Wood)
    -   Add cookie support with cmdline switch --use-cookies for all
        HTTP based remotes (qip)
    -   Warn if --checksum is set but there are no hashes available
        (Nick Craig-Wood)
    -   Rework rate limiting (pacer) to be more accurate and allow
        bursting (Nick Craig-Wood)
    -   Improve error reporting for too many/few arguments in commands
        (Nick Craig-Wood)
    -   listremotes: Remove -l short flag as it conflicts with the new
        global flag (weetmuts)
    -   Make http serving with auth generate INFO messages on auth fail
        (Nick Craig-Wood)
-   Bug Fixes
    -   Fix layout of stats (Nick Craig-Wood)
    -   Fix --progress crash under Windows Jenkins (Nick Craig-Wood)
    -   Fix transfer of google/onedrive docs by calling Rcat in Copy
        when size is -1 (Cnly)
    -   copyurl: Fix checking of --dry-run (Denis Skovpen)
-   Mount
    -   Check that mountpoint and local directory to mount don't overlap
        (Nick Craig-Wood)
    -   Fix mount size under 32 bit Windows (Nick Craig-Wood)
-   VFS
    -   Implement renaming of directories for backends without DirMove
        (Nick Craig-Wood)
        -   now all backends except b2 support renaming directories
    -   Implement --vfs-cache-max-size to limit the total size of the
        cache (Nick Craig-Wood)
    -   Add --dir-perms and --file-perms flags to set default
        permissions (Nick Craig-Wood)
    -   Fix deadlock on concurrent operations on a directory (Nick
        Craig-Wood)
    -   Fix deadlock between RWFileHandle.close and File.Remove (Nick
        Craig-Wood)
    -   Fix renaming/deleting open files with cache mode "writes" under
        Windows (Nick Craig-Wood)
    -   Fix panic on rename with --dry-run set (Nick Craig-Wood)
    -   Fix vfs/refresh with recurse=true needing the --fast-list flag
-   Local
    -   Add support for -l/--links (symbolic link translation)
        (yair@unicorn)
        -   this works by showing links as link.rclonelink - see local
            backend docs for more info
        -   this errors if used with -L/--copy-links
    -   Fix renaming/deleting open files on Windows (Nick Craig-Wood)
-   Crypt
    -   Check for maximum length before decrypting filename to fix panic
        (Garry McNulty)
-   Azure Blob
    -   Allow building azureblob backend on *BSD (themylogin)
    -   Use the rclone HTTP client to support --dump headers,
        --tpslimit, etc. (Nick Craig-Wood)
    -   Use the s3 pacer for 0 delay in non error conditions (Nick
        Craig-Wood)
    -   Ignore directory markers (Nick Craig-Wood)
    -   Stop Mkdir attempting to create existing containers (Nick
        Craig-Wood)
-   B2
    -   cleanup: will remove unfinished large files >24hrs old (Garry
        McNulty)
    -   For a bucket limited application key check the bucket name (Nick
        Craig-Wood)
        -   before this, rclone would use the authorised bucket
            regardless of what you put on the command line
    -   Added --b2-disable-checksum flag (Wojciech Smigielski)
        -   this enables large files to be uploaded without a SHA-1 hash
            for speed reasons
-   Drive
    -   Set default pacer to 100ms for 10 tps (Nick Craig-Wood)
        -   This fits the Google defaults much better and reduces the
            403 errors massively
        -   Add --drive-pacer-min-sleep and --drive-pacer-burst to
            control the pacer
    -   Improve ChangeNotify support for items with multiple parents
        (Fabian Möller)
    -   Fix ListR for items with multiple parents - this fixes oddities
        with vfs/refresh (Fabian Möller)
    -   Fix using --drive-impersonate and appfolders (Nick Craig-Wood)
    -   Fix google docs in rclone mount for some (not all) applications
        (Nick Craig-Wood)
-   Dropbox
    -   Retry-After support for Dropbox backend (Mathieu Carbou)
-   FTP
    -   Wait for 60 seconds for a connection to Close then declare it
        dead (Nick Craig-Wood)
        -   helps with indefinite hangs on some FTP servers
-   Google Cloud Storage
    -   Update google cloud storage endpoints (weetmuts)
-   HTTP
    -   Add an example with username and password which is supported but
        wasn't documented (Nick Craig-Wood)
    -   Fix backend with --files-from and nonexistent files (Nick
        Craig-Wood)
-   Hubic
    -   Make error message more informative if authentication fails
        (Nick Craig-Wood)
-   Jottacloud
    -   Resume and deduplication support (Oliver Heyme)
    -   Use token auth for all API requests Don't store password anymore
        (Sebastian Bünger)
    -   Add support for 2-factor authentication (Sebastian Bünger)
-   Mega
    -   Implement v2 account login which fixes logins for newer Mega
        accounts (Nick Craig-Wood)
    -   Return error if an unknown length file is attempted to be
        uploaded (Nick Craig-Wood)
    -   Add new error codes for better error reporting (Nick Craig-Wood)
-   Onedrive
    -   Fix broken support for "shared with me" folders (Alex Chen)
    -   Fix root ID not normalised (Cnly)
    -   Return err instead of panic on unknown-sized uploads (Cnly)
-   Qingstor
    -   Fix go routine leak on multipart upload errors (Nick Craig-Wood)
    -   Add upload chunk size/concurrency/cutoff control (Nick
        Craig-Wood)
    -   Default --qingstor-upload-concurrency to 1 to work around bug
        (Nick Craig-Wood)
-   S3
    -   Implement --s3-upload-cutoff for single part uploads below this
        (Nick Craig-Wood)
    -   Change --s3-upload-concurrency default to 4 to increase
        performance (Nick Craig-Wood)
    -   Add --s3-bucket-acl to control bucket ACL (Nick Craig-Wood)
    -   Auto detect region for buckets on operation failure (Nick
        Craig-Wood)
    -   Add GLACIER storage class (William Cocker)
    -   Add Scaleway to s3 documentation (Rémy Léone)
    -   Add AWS endpoint eu-north-1 (weetmuts)
-   SFTP
    -   Add support for PEM encrypted private keys (Fabian Möller)
    -   Add option to force the usage of an ssh-agent (Fabian Möller)
    -   Perform environment variable expansion on key-file (Fabian
        Möller)
    -   Fix rmdir on Windows based servers (e.g. CrushFTP) (Nick
        Craig-Wood)
    -   Fix rmdir deleting directory contents on some SFTP servers (Nick
        Craig-Wood)
    -   Fix error on dangling symlinks (Nick Craig-Wood)
-   Swift
    -   Add --swift-no-chunk to disable segmented uploads in rcat/mount
        (Nick Craig-Wood)
    -   Introduce application credential auth support (kayrus)
    -   Fix memory usage by slimming Object (Nick Craig-Wood)
    -   Fix extra requests on upload (Nick Craig-Wood)
    -   Fix reauth on big files (Nick Craig-Wood)
-   Union
    -   Fix poll-interval not working (Nick Craig-Wood)
-   WebDAV
    -   Support About which means rclone mount will show the correct
        disk size (Nick Craig-Wood)
    -   Support MD5 and SHA1 hashes with Owncloud and Nextcloud (Nick
        Craig-Wood)
    -   Fail soft on time parsing errors (Nick Craig-Wood)
    -   Fix infinite loop on failed directory creation (Nick Craig-Wood)
    -   Fix identification of directories for Bitrix Site Manager (Nick
        Craig-Wood)
    -   Fix upload of 0 length files on some servers (Nick Craig-Wood)
    -   Fix if MKCOL fails with 423 Locked assume the directory exists
        (Nick Craig-Wood)

v1.45 - 2018-11-24

-   New backends
    -   The Yandex backend was re-written - see below for details
        (Sebastian Bünger)
-   New commands
    -   rcd: New command just to serve the remote control API (Nick
        Craig-Wood)
-   New Features
    -   The remote control API (rc) was greatly expanded to allow full
        control over rclone (Nick Craig-Wood)
        -   sensitive operations require authorization or the
            --rc-no-auth flag
        -   config/* operations to configure rclone
        -   options/* for reading/setting command line flags
        -   operations/* for all low level operations, e.g. copy file,
            list directory
        -   sync/* for sync, copy and move
        -   --rc-files flag to serve files on the rc http server
            -   this is for building web native GUIs for rclone
        -   Optionally serving objects on the rc http server
        -   Ensure rclone fails to start up if the --rc port is in use
            already
        -   See the rc docs for more info
    -   sync/copy/move
        -   Make --files-from only read the objects specified and don't
            scan directories (Nick Craig-Wood)
            -   This is a huge speed improvement for destinations with
                lots of files
    -   filter: Add --ignore-case flag (Nick Craig-Wood)
    -   ncdu: Add remove function ('d' key) (Henning Surmeier)
    -   rc command
        -   Add --json flag for structured JSON input (Nick Craig-Wood)
        -   Add --user and --pass flags and interpret --rc-user,
            --rc-pass, --rc-addr (Nick Craig-Wood)
    -   build
        -   Require go1.8 or later for compilation (Nick Craig-Wood)
        -   Enable softfloat on MIPS arch (Scott Edlund)
        -   Integration test framework revamped with a better report and
            better retries (Nick Craig-Wood)
-   Bug Fixes
    -   cmd: Make --progress update the stats correctly at the end (Nick
        Craig-Wood)
    -   config: Create config directory on save if it is missing (Nick
        Craig-Wood)
    -   dedupe: Check for existing filename before renaming a dupe file
        (ssaqua)
    -   move: Don't create directories with --dry-run (Nick Craig-Wood)
    -   operations: Fix Purge and Rmdirs when dir is not the root (Nick
        Craig-Wood)
    -   serve http/webdav/restic: Ensure rclone exits if the port is in
        use (Nick Craig-Wood)
-   Mount
    -   Make --volname work for Windows and macOS (Nick Craig-Wood)
-   Azure Blob
    -   Avoid context deadline exceeded error by setting a large
        TryTimeout value (brused27)
    -   Fix erroneous Rmdir error "directory not empty" (Nick
        Craig-Wood)
    -   Wait for up to 60s to create a just deleted container (Nick
        Craig-Wood)
-   Dropbox
    -   Add dropbox impersonate support (Jake Coggiano)
-   Jottacloud
    -   Fix bug in --fast-list handing of empty folders (albertony)
-   Opendrive
    -   Fix transfer of files with + and & in (Nick Craig-Wood)
    -   Fix retries of upload chunks (Nick Craig-Wood)
-   S3
    -   Set ACL for server-side copies to that provided by the user
        (Nick Craig-Wood)
    -   Fix role_arn, credential_source, ... (Erik Swanson)
    -   Add config info for Wasabi's US-West endpoint (Henry Ptasinski)
-   SFTP
    -   Ensure file hash checking is really disabled (Jon Fautley)
-   Swift
    -   Add pacer for retries to make swift more reliable (Nick
        Craig-Wood)
-   WebDAV
    -   Add Content-Type to PUT requests (Nick Craig-Wood)
    -   Fix config parsing so --webdav-user and --webdav-pass flags work
        (Nick Craig-Wood)
    -   Add RFC3339 date format (Ralf Hemberger)
-   Yandex
    -   The yandex backend was re-written (Sebastian Bünger)
        -   This implements low level retries (Sebastian Bünger)
        -   Copy, Move, DirMove, PublicLink and About optional
            interfaces (Sebastian Bünger)
        -   Improved general error handling (Sebastian Bünger)
        -   Removed ListR for now due to inconsistent behaviour
            (Sebastian Bünger)

v1.44 - 2018-10-15

-   New commands
    -   serve ftp: Add ftp server (Antoine GIRARD)
    -   settier: perform storage tier changes on supported remotes
        (sandeepkru)
-   New Features
    -   Reworked command line help
        -   Make default help less verbose (Nick Craig-Wood)
        -   Split flags up into global and backend flags (Nick
            Craig-Wood)
        -   Implement specialised help for flags and backends (Nick
            Craig-Wood)
        -   Show URL of backend help page when starting config (Nick
            Craig-Wood)
    -   stats: Long names now split in center (Joanna Marek)
    -   Add --log-format flag for more control over log output (dcpu)
    -   rc: Add support for OPTIONS and basic CORS (frenos)
    -   stats: show FatalErrors and NoRetryErrors in stats (Cédric
        Connes)
-   Bug Fixes
    -   Fix -P not ending with a new line (Nick Craig-Wood)
    -   config: don't create default config dir when user supplies
        --config (albertony)
    -   Don't print non-ASCII characters with --progress on windows
        (Nick Craig-Wood)
    -   Correct logs for excluded items (ssaqua)
-   Mount
    -   Remove EXPERIMENTAL tags (Nick Craig-Wood)
-   VFS
    -   Fix race condition detected by serve ftp tests (Nick Craig-Wood)
    -   Add vfs/poll-interval rc command (Fabian Möller)
    -   Enable rename for nearly all remotes using server-side Move or
        Copy (Nick Craig-Wood)
    -   Reduce directory cache cleared by poll-interval (Fabian Möller)
    -   Remove EXPERIMENTAL tags (Nick Craig-Wood)
-   Local
    -   Skip bad symlinks in dir listing with -L enabled (Cédric Connes)
    -   Preallocate files on Windows to reduce fragmentation (Nick
        Craig-Wood)
    -   Preallocate files on linux with fallocate(2) (Nick Craig-Wood)
-   Cache
    -   Add cache/fetch rc function (Fabian Möller)
    -   Fix worker scale down (Fabian Möller)
    -   Improve performance by not sending info requests for cached
        chunks (dcpu)
    -   Fix error return value of cache/fetch rc method (Fabian Möller)
    -   Documentation fix for cache-chunk-total-size (Anagh Kumar
        Baranwal)
    -   Preserve leading / in wrapped remote path (Fabian Möller)
    -   Add plex_insecure option to skip certificate validation (Fabian
        Möller)
    -   Remove entries that no longer exist in the source (dcpu)
-   Crypt
    -   Preserve leading / in wrapped remote path (Fabian Möller)
-   Alias
    -   Fix handling of Windows network paths (Nick Craig-Wood)
-   Azure Blob
    -   Add --azureblob-list-chunk parameter (Santiago Rodríguez)
    -   Implemented settier command support on azureblob remote.
        (sandeepkru)
    -   Work around SDK bug which causes errors for chunk-sized files
        (Nick Craig-Wood)
-   Box
    -   Implement link sharing. (Sebastian Bünger)
-   Drive
    -   Add --drive-import-formats - google docs can now be imported
        (Fabian Möller)
        -   Rewrite mime type and extension handling (Fabian Möller)
        -   Add document links (Fabian Möller)
        -   Add support for multipart document extensions (Fabian
            Möller)
        -   Add support for apps-script to json export (Fabian Möller)
        -   Fix escaped chars in documents during list (Fabian Möller)
    -   Add --drive-v2-download-min-size a workaround for slow downloads
        (Fabian Möller)
    -   Improve directory notifications in ChangeNotify (Fabian Möller)
    -   When listing team drives in config, continue on failure (Nick
        Craig-Wood)
-   FTP
    -   Add a small pause after failed upload before deleting file (Nick
        Craig-Wood)
-   Google Cloud Storage
    -   Fix service_account_file being ignored (Fabian Möller)
-   Jottacloud
    -   Minor improvement in quota info (omit if unlimited) (albertony)
    -   Add --fast-list support (albertony)
    -   Add permanent delete support: --jottacloud-hard-delete
        (albertony)
    -   Add link sharing support (albertony)
    -   Fix handling of reserved characters. (Sebastian Bünger)
    -   Fix socket leak on Object.Remove (Nick Craig-Wood)
-   Onedrive
    -   Rework to support Microsoft Graph (Cnly)
        -   NB this will require re-authenticating the remote
    -   Removed upload cutoff and always do session uploads (Oliver
        Heyme)
    -   Use single-part upload for empty files (Cnly)
    -   Fix new fields not saved when editing old config (Alex Chen)
    -   Fix sometimes special chars in filenames not replaced (Alex
        Chen)
    -   Ignore OneNote files by default (Alex Chen)
    -   Add link sharing support (jackyzy823)
-   S3
    -   Use custom pacer, to retry operations when reasonable (Craig
        Miskell)
    -   Use configured server-side-encryption and storage class options
        when calling CopyObject() (Paul Kohout)
    -   Make --s3-v2-auth flag (Nick Craig-Wood)
    -   Fix v2 auth on files with spaces (Nick Craig-Wood)
-   Union
    -   Implement union backend which reads from multiple backends
        (Felix Brucker)
    -   Implement optional interfaces (Move, DirMove, Copy, etc.) (Nick
        Craig-Wood)
    -   Fix ChangeNotify to support multiple remotes (Fabian Möller)
    -   Fix --backup-dir on union backend (Nick Craig-Wood)
-   WebDAV
    -   Add another time format (Nick Craig-Wood)
    -   Add a small pause after failed upload before deleting file (Nick
        Craig-Wood)
    -   Add workaround for missing mtime (buergi)
    -   Sharepoint: Renew cookies after 12hrs (Henning Surmeier)
-   Yandex
    -   Remove redundant nil checks (teresy)

v1.43.1 - 2018-09-07

Point release to fix hubic and azureblob backends.

-   Bug Fixes
    -   ncdu: Return error instead of log.Fatal in Show (Fabian Möller)
    -   cmd: Fix crash with --progress and --stats 0 (Nick Craig-Wood)
    -   docs: Tidy website display (Anagh Kumar Baranwal)
-   Azure Blob:
    -   Fix multi-part uploads. (sandeepkru)
-   Hubic
    -   Fix uploads (Nick Craig-Wood)
    -   Retry auth fetching if it fails to make hubic more reliable
        (Nick Craig-Wood)

v1.43 - 2018-09-01

-   New backends
    -   Jottacloud (Sebastian Bünger)
-   New commands
    -   copyurl: copies a URL to a remote (Denis)
-   New Features
    -   Reworked config for backends (Nick Craig-Wood)
        -   All backend config can now be supplied by command line, env
            var or config file
        -   Advanced section in the config wizard for the optional items
        -   A large step towards rclone backends being usable in other
            go software
        -   Allow on the fly remotes with :backend: syntax
    -   Stats revamp
        -   Add --progress/-P flag to show interactive progress (Nick
            Craig-Wood)
        -   Show the total progress of the sync in the stats (Nick
            Craig-Wood)
        -   Add --stats-one-line flag for single line stats (Nick
            Craig-Wood)
    -   Added weekday schedule into --bwlimit (Mateusz)
    -   lsjson: Add option to show the original object IDs (Fabian
        Möller)
    -   serve webdav: Make Content-Type without reading the file and add
        --etag-hash (Nick Craig-Wood)
    -   build
        -   Build macOS with native compiler (Nick Craig-Wood)
        -   Update to use go1.11 for the build (Nick Craig-Wood)
    -   rc
        -   Added core/stats to return the stats (reddi1)
    -   version --check: Prints the current release and beta versions
        (Nick Craig-Wood)
-   Bug Fixes
    -   accounting
        -   Fix time to completion estimates (Nick Craig-Wood)
        -   Fix moving average speed for file stats (Nick Craig-Wood)
    -   config: Fix error reading password from piped input (Nick
        Craig-Wood)
    -   move: Fix --delete-empty-src-dirs flag to delete all empty dirs
        on move (ishuah)
-   Mount
    -   Implement --daemon-timeout flag for OSXFUSE (Nick Craig-Wood)
    -   Fix mount --daemon not working with encrypted config (Alex Chen)
    -   Clip the number of blocks to 2^32-1 on macOS - fixes borg backup
        (Nick Craig-Wood)
-   VFS
    -   Enable vfs-read-chunk-size by default (Fabian Möller)
    -   Add the vfs/refresh rc command (Fabian Möller)
    -   Add non recursive mode to vfs/refresh rc command (Fabian Möller)
    -   Try to seek buffer on read only files (Fabian Möller)
-   Local
    -   Fix crash when deprecated --local-no-unicode-normalization is
        supplied (Nick Craig-Wood)
    -   Fix mkdir error when trying to copy files to the root of a drive
        on windows (Nick Craig-Wood)
-   Cache
    -   Fix nil pointer deref when using lsjson on cached directory
        (Nick Craig-Wood)
    -   Fix nil pointer deref for occasional crash on playback (Nick
        Craig-Wood)
-   Crypt
    -   Fix accounting when checking hashes on upload (Nick Craig-Wood)
-   Amazon Cloud Drive
    -   Make very clear in the docs that rclone has no ACD keys (Nick
        Craig-Wood)
-   Azure Blob
    -   Add connection string and SAS URL auth (Nick Craig-Wood)
    -   List the container to see if it exists (Nick Craig-Wood)
    -   Port new Azure Blob Storage SDK (sandeepkru)
    -   Added blob tier, tier between Hot, Cool and Archive.
        (sandeepkru)
    -   Remove leading / from paths (Nick Craig-Wood)
-   B2
    -   Support Application Keys (Nick Craig-Wood)
    -   Remove leading / from paths (Nick Craig-Wood)
-   Box
    -   Fix upload of > 2GB files on 32 bit platforms (Nick Craig-Wood)
    -   Make --box-commit-retries flag defaulting to 100 to fix large
        uploads (Nick Craig-Wood)
-   Drive
    -   Add --drive-keep-revision-forever flag (lewapm)
    -   Handle gdocs when filtering file names in list (Fabian Möller)
    -   Support using --fast-list for large speedups (Fabian Möller)
-   FTP
    -   Fix Put mkParentDir failed: 521 for BunnyCDN (Nick Craig-Wood)
-   Google Cloud Storage
    -   Fix index out of range error with --fast-list (Nick Craig-Wood)
-   Jottacloud
    -   Fix MD5 error check (Oliver Heyme)
    -   Handle empty time values (Martin Polden)
    -   Calculate missing MD5s (Oliver Heyme)
    -   Docs, fixes and tests for MD5 calculation (Nick Craig-Wood)
    -   Add optional MimeTyper interface. (Sebastian Bünger)
    -   Implement optional About interface (for df support). (Sebastian
        Bünger)
-   Mega
    -   Wait for events instead of arbitrary sleeping (Nick Craig-Wood)
    -   Add --mega-hard-delete flag (Nick Craig-Wood)
    -   Fix failed logins with upper case chars in email (Nick
        Craig-Wood)
-   Onedrive
    -   Shared folder support (Yoni Jah)
    -   Implement DirMove (Cnly)
    -   Fix rmdir sometimes deleting directories with contents (Nick
        Craig-Wood)
-   Pcloud
    -   Delete half uploaded files on upload error (Nick Craig-Wood)
-   Qingstor
    -   Remove leading / from paths (Nick Craig-Wood)
-   S3
    -   Fix index out of range error with --fast-list (Nick Craig-Wood)
    -   Add --s3-force-path-style (Nick Craig-Wood)
    -   Add support for KMS Key ID (bsteiss)
    -   Remove leading / from paths (Nick Craig-Wood)
-   Swift
    -   Add storage_policy (Ruben Vandamme)
    -   Make it so just storage_url or auth_token can be overridden
        (Nick Craig-Wood)
    -   Fix server-side copy bug for unusual file names (Nick
        Craig-Wood)
    -   Remove leading / from paths (Nick Craig-Wood)
-   WebDAV
    -   Ensure we call MKCOL with a URL with a trailing / for QNAP
        interop (Nick Craig-Wood)
    -   If root ends with / then don't check if it is a file (Nick
        Craig-Wood)
    -   Don't accept redirects when reading metadata (Nick Craig-Wood)
    -   Add bearer token (Macaroon) support for dCache (Nick Craig-Wood)
    -   Document dCache and Macaroons (Onno Zweers)
    -   Sharepoint recursion with different depth (Henning)
    -   Attempt to remove failed uploads (Nick Craig-Wood)
-   Yandex
    -   Fix listing/deleting files in the root (Nick Craig-Wood)

v1.42 - 2018-06-16

-   New backends
    -   OpenDrive (Oliver Heyme, Jakub Karlicek, ncw)
-   New commands
    -   deletefile command (Filip Bartodziej)
-   New Features
    -   copy, move: Copy single files directly, don't use --files-from
        work-around
        -   this makes them much more efficient
    -   Implement --max-transfer flag to quit transferring at a limit
        -   make exit code 8 for --max-transfer exceeded
    -   copy: copy empty source directories to destination (Ishuah
        Kariuki)
    -   check: Add --one-way flag (Kasper Byrdal Nielsen)
    -   Add siginfo handler for macOS for ctrl-T stats (kubatasiemski)
    -   rc
        -   add core/gc to run a garbage collection on demand
        -   enable go profiling by default on the --rc port
        -   return error from remote on failure
    -   lsf
        -   Add --absolute flag to add a leading / onto path names
        -   Add --csv flag for compliant CSV output
        -   Add 'm' format specifier to show the MimeType
        -   Implement 'i' format for showing object ID
    -   lsjson
        -   Add MimeType to the output
        -   Add ID field to output to show Object ID
    -   Add --retries-sleep flag (Benjamin Joseph Dag)
    -   Oauth tidy up web page and error handling (Henning Surmeier)
-   Bug Fixes
    -   Password prompt output with --log-file fixed for unix (Filip
        Bartodziej)
    -   Calculate ModifyWindow each time on the fly to fix various
        problems (Stefan Breunig)
-   Mount
    -   Only print "File.rename error" if there actually is an error
        (Stefan Breunig)
    -   Delay rename if file has open writers instead of failing
        outright (Stefan Breunig)
    -   Ensure atexit gets run on interrupt
    -   macOS enhancements
        -   Make --noappledouble --noapplexattr
        -   Add --volname flag and remove special chars from it
        -   Make Get/List/Set/Remove xattr return ENOSYS for efficiency
        -   Make --daemon work for macOS without CGO
-   VFS
    -   Add --vfs-read-chunk-size and --vfs-read-chunk-size-limit
        (Fabian Möller)
    -   Fix ChangeNotify for new or changed folders (Fabian Möller)
-   Local
    -   Fix symlink/junction point directory handling under Windows
        -   NB you will need to add -L to your command line to copy
            files with reparse points
-   Cache
    -   Add non cached dirs on notifications (Remus Bunduc)
    -   Allow root to be expired from rc (Remus Bunduc)
    -   Clean remaining empty folders from temp upload path (Remus
        Bunduc)
    -   Cache lists using batch writes (Remus Bunduc)
    -   Use secure websockets for HTTPS Plex addresses (John Clayton)
    -   Reconnect plex websocket on failures (Remus Bunduc)
    -   Fix panic when running without plex configs (Remus Bunduc)
    -   Fix root folder caching (Remus Bunduc)
-   Crypt
    -   Check the encrypted hash of files when uploading for extra data
        security
-   Dropbox
    -   Make Dropbox for business folders accessible using an initial /
        in the path
-   Google Cloud Storage
    -   Low level retry all operations if necessary
-   Google Drive
    -   Add --drive-acknowledge-abuse to download flagged files
    -   Add --drive-alternate-export to fix large doc export
    -   Don't attempt to choose Team Drives when using rclone config
        create
    -   Fix change list polling with team drives
    -   Fix ChangeNotify for folders (Fabian Möller)
    -   Fix about (and df on a mount) for team drives
-   Onedrive
    -   Errorhandler for onedrive for business requests (Henning
        Surmeier)
-   S3
    -   Adjust upload concurrency with --s3-upload-concurrency
        (themylogin)
    -   Fix --s3-chunk-size which was always using the minimum
-   SFTP
    -   Add --ssh-path-override flag (Piotr Oleszczyk)
    -   Fix slow downloads for long latency connections
-   Webdav
    -   Add workarounds for biz.mail.ru
    -   Ignore Reason-Phrase in status line to fix 4shared (Rodrigo)
    -   Better error message generation

v1.41 - 2018-04-28

-   New backends
    -   Mega support added
    -   Webdav now supports SharePoint cookie authentication (hensur)
-   New commands
    -   link: create public link to files and folders (Stefan Breunig)
    -   about: gets quota info from a remote (a-roussos, ncw)
    -   hashsum: a generic tool for any hash to produce md5sum like
        output
-   New Features
    -   lsd: Add -R flag and fix and update docs for all ls commands
    -   ncdu: added a "refresh" key - CTRL-L (Keith Goldfarb)
    -   serve restic: Add append-only mode (Steve Kriss)
    -   serve restic: Disallow overwriting files in append-only mode
        (Alexander Neumann)
    -   serve restic: Print actual listener address (Matt Holt)
    -   size: Add --json flag (Matthew Holt)
    -   sync: implement --ignore-errors (Mateusz Pabian)
    -   dedupe: Add dedupe largest functionality (Richard Yang)
    -   fs: Extend SizeSuffix to include TB and PB for rclone about
    -   fs: add --dump goroutines and --dump openfiles for debugging
    -   rc: implement core/memstats to print internal memory usage info
    -   rc: new call rc/pid (Michael P. Dubner)
-   Compile
    -   Drop support for go1.6
-   Release
    -   Fix make tarball (Chih-Hsuan Yen)
-   Bug Fixes
    -   filter: fix --min-age and --max-age together check
    -   fs: limit MaxIdleConns and MaxIdleConnsPerHost in transport
    -   lsd,lsf: make sure all times we output are in local time
    -   rc: fix setting bwlimit to unlimited
    -   rc: take note of the --rc-addr flag too as per the docs
-   Mount
    -   Use About to return the correct disk total/used/free (e.g. in
        df)
    -   Set --attr-timeout default to 1s - fixes:
        -   rclone using too much memory
        -   rclone not serving files to samba
        -   excessive time listing directories
    -   Fix df -i (upstream fix)
-   VFS
    -   Filter files . and .. from directory listing
    -   Only make the VFS cache if --vfs-cache-mode > Off
-   Local
    -   Add --local-no-check-updated to disable updated file checks
    -   Retry remove on Windows sharing violation error
-   Cache
    -   Flush the memory cache after close
    -   Purge file data on notification
    -   Always forget parent dir for notifications
    -   Integrate with Plex websocket
    -   Add rc cache/stats (seuffert)
    -   Add info log on notification
-   Box
    -   Fix failure reading large directories - parse file/directory
        size as float
-   Dropbox
    -   Fix crypt+obfuscate on dropbox
    -   Fix repeatedly uploading the same files
-   FTP
    -   Work around strange response from box FTP server
    -   More workarounds for FTP servers to fix mkParentDir error
    -   Fix no error on listing nonexistent directory
-   Google Cloud Storage
    -   Add service_account_credentials (Matt Holt)
    -   Detect bucket presence by listing it - minimises permissions
        needed
    -   Ignore zero length directory markers
-   Google Drive
    -   Add service_account_credentials (Matt Holt)
    -   Fix directory move leaving a hardlinked directory behind
    -   Return proper google errors when Opening files
    -   When initialized with a filepath, optional features used
        incorrect root path (Stefan Breunig)
-   HTTP
    -   Fix sync for servers which don't return Content-Length in HEAD
-   Onedrive
    -   Add QuickXorHash support for OneDrive for business
    -   Fix socket leak in multipart session upload
-   S3
    -   Look in S3 named profile files for credentials
    -   Add --s3-disable-checksum to disable checksum uploading (Chris
        Redekop)
    -   Hierarchical configuration support (Giri Badanahatti)
    -   Add in config for all the supported S3 providers
    -   Add One Zone Infrequent Access storage class (Craig Rachel)
    -   Add --use-server-modtime support (Peter Baumgartner)
    -   Add --s3-chunk-size option to control multipart uploads
    -   Ignore zero length directory markers
-   SFTP
    -   Update docs to match code, fix typos and clarify
        disable_hashcheck prompt (Michael G. Noll)
    -   Update docs with Synology quirks
    -   Fail soft with a debug on hash failure
-   Swift
    -   Add --use-server-modtime support (Peter Baumgartner)
-   Webdav
    -   Support SharePoint cookie authentication (hensur)
    -   Strip leading and trailing / off root

v1.40 - 2018-03-19

-   New backends
    -   Alias backend to create aliases for existing remote names
        (Fabian Möller)
-   New commands
    -   lsf: list for parsing purposes (Jakub Tasiemski)
        -   by default this is a simple non recursive list of files and
            directories
        -   it can be configured to add more info in an easy to parse
            way
    -   serve restic: for serving a remote as a Restic REST endpoint
        -   This enables restic to use any backends that rclone can
            access
        -   Thanks Alexander Neumann for help, patches and review
    -   rc: enable the remote control of a running rclone
        -   The running rclone must be started with --rc and related
            flags.
        -   Currently there is support for bwlimit, and flushing for
            mount and cache.
-   New Features
    -   --max-delete flag to add a delete threshold (Bjørn Erik
        Pedersen)
    -   All backends now support RangeOption for ranged Open
        -   cat: Use RangeOption for limited fetches to make more
            efficient
        -   cryptcheck: make reading of nonce more efficient with
            RangeOption
    -   serve http/webdav/restic
        -   support SSL/TLS
        -   add --user --pass and --htpasswd for authentication
    -   copy/move: detect file size change during copy/move and abort
        transfer (ishuah)
    -   cryptdecode: added option to return encrypted file names.
        (ishuah)
    -   lsjson: add --encrypted to show encrypted name (Jakub Tasiemski)
    -   Add --stats-file-name-length to specify the printed file name
        length for stats (Will Gunn)
-   Compile
    -   Code base was shuffled and factored
        -   backends moved into a backend directory
        -   large packages split up
        -   See the CONTRIBUTING.md doc for info as to what lives where
            now
    -   Update to using go1.10 as the default go version
    -   Implement daily full integration tests
-   Release
    -   Include a source tarball and sign it and the binaries
    -   Sign the git tags as part of the release process
    -   Add .deb and .rpm packages as part of the build
    -   Make a beta release for all branches on the main repo (but not
        pull requests)
-   Bug Fixes
    -   config: fixes errors on nonexistent config by loading config
        file only on first access
    -   config: retry saving the config after failure (Mateusz)
    -   sync: when using --backup-dir don't delete files if we can't set
        their modtime
        -   this fixes odd behaviour with Dropbox and --backup-dir
    -   fshttp: fix idle timeouts for HTTP connections
    -   serve http: fix serving files with : in - fixes
    -   Fix --exclude-if-present to ignore directories which it doesn't
        have permission for (Iakov Davydov)
    -   Make accounting work properly with crypt and b2
    -   remove --no-traverse flag because it is obsolete
-   Mount
    -   Add --attr-timeout flag to control attribute caching in kernel
        -   this now defaults to 0 which is correct but less efficient
        -   see the mount docs for more info
    -   Add --daemon flag to allow mount to run in the background
        (ishuah)
    -   Fix: Return ENOSYS rather than EIO on attempted link
        -   This fixes FileZilla accessing an rclone mount served over
            sftp.
    -   Fix setting modtime twice
    -   Mount tests now run on CI for Linux (mount & cmount)/Mac/Windows
    -   Many bugs fixed in the VFS layer - see below
-   VFS
    -   Many fixes for --vfs-cache-mode writes and above
        -   Update cached copy if we know it has changed (fixes stale
            data)
        -   Clean path names before using them in the cache
        -   Disable cache cleaner if --vfs-cache-poll-interval=0
        -   Fill and clean the cache immediately on startup
    -   Fix Windows opening every file when it stats the file
    -   Fix applying modtime for an open Write Handle
    -   Fix creation of files when truncating
    -   Write 0 bytes when flushing unwritten handles to avoid race
        conditions in FUSE
    -   Downgrade "poll-interval is not supported" message to Info
    -   Make OpenFile and friends return EINVAL if O_RDONLY and O_TRUNC
-   Local
    -   Downgrade "invalid cross-device link: trying copy" to debug
    -   Make DirMove return fs.ErrorCantDirMove to allow fallback to
        Copy for cross device
    -   Fix race conditions updating the hashes
-   Cache
    -   Add support for polling - cache will update when remote changes
        on supported backends
    -   Reduce log level for Plex api
    -   Fix dir cache issue
    -   Implement --cache-db-wait-time flag
    -   Improve efficiency with RangeOption and RangeSeek
    -   Fix dirmove with temp fs enabled
    -   Notify vfs when using temp fs
    -   Offline uploading
    -   Remote control support for path flushing
-   Amazon cloud drive
    -   Rclone no longer has any working keys - disable integration
        tests
    -   Implement DirChangeNotify to notify cache/vfs/mount of changes
-   Azureblob
    -   Don't check for bucket/container presence if listing was OK
        -   this makes rclone do one less request per invocation
    -   Improve accounting for chunked uploads
-   Backblaze B2
    -   Don't check for bucket/container presence if listing was OK
        -   this makes rclone do one less request per invocation
-   Box
    -   Improve accounting for chunked uploads
-   Dropbox
    -   Fix custom oauth client parameters
-   Google Cloud Storage
    -   Don't check for bucket/container presence if listing was OK
        -   this makes rclone do one less request per invocation
-   Google Drive
    -   Migrate to api v3 (Fabian Möller)
    -   Add scope configuration and root folder selection
    -   Add --drive-impersonate for service accounts
        -   thanks to everyone who tested, explored and contributed docs
    -   Add --drive-use-created-date to use created date as modified
        date (nbuchanan)
    -   Request the export formats only when required
        -   This makes rclone quicker when there are no google docs
    -   Fix finding paths with latin1 chars (a workaround for a drive
        bug)
    -   Fix copying of a single Google doc file
    -   Fix --drive-auth-owner-only to look in all directories
-   HTTP
    -   Fix handling of directories with & in
-   Onedrive
    -   Removed upload cutoff and always do session uploads
        -   this stops the creation of multiple versions on business
            onedrive
    -   Overwrite object size value with real size when reading file.
        (Victor)
        -   this fixes oddities when onedrive misreports the size of
            images
-   Pcloud
    -   Remove unused chunked upload flag and code
-   Qingstor
    -   Don't check for bucket/container presence if listing was OK
        -   this makes rclone do one less request per invocation
-   S3
    -   Support hashes for multipart files (Chris Redekop)
    -   Initial support for IBM COS (S3) (Giri Badanahatti)
    -   Update docs to discourage use of v2 auth with CEPH and others
    -   Don't check for bucket/container presence if listing was OK
        -   this makes rclone do one less request per invocation
    -   Fix server-side copy and set modtime on files with + in
-   SFTP
    -   Add option to disable remote hash check command execution (Jon
        Fautley)
    -   Add --sftp-ask-password flag to prompt for password when needed
        (Leo R. Lundgren)
    -   Add set_modtime configuration option
    -   Fix following of symlinks
    -   Fix reading config file outside of Fs setup
    -   Fix reading $USER in username fallback not $HOME
    -   Fix running under crontab - Use correct OS way of reading
        username
-   Swift
    -   Fix refresh of authentication token
        -   in v1.39 a bug was introduced which ignored new tokens -
            this fixes it
    -   Fix extra HEAD transaction when uploading a new file
    -   Don't check for bucket/container presence if listing was OK
        -   this makes rclone do one less request per invocation
-   Webdav
    -   Add new time formats to support mydrive.ch and others

v1.39 - 2017-12-23

-   New backends
    -   WebDAV
        -   tested with nextcloud, owncloud, put.io and others!
    -   Pcloud
    -   cache - wraps a cache around other backends (Remus Bunduc)
        -   useful in combination with mount
        -   NB this feature is in beta so use with care
-   New commands
    -   serve command with subcommands:
        -   serve webdav: this implements a webdav server for any rclone
            remote.
        -   serve http: command to serve a remote over HTTP
    -   config: add sub commands for full config file management
        -   create/delete/dump/edit/file/password/providers/show/update
    -   touch: to create or update the timestamp of a file (Jakub
        Tasiemski)
-   New Features
    -   curl install for rclone (Filip Bartodziej)
    -   --stats now shows percentage, size, rate and ETA in condensed
        form (Ishuah Kariuki)
    -   --exclude-if-present to exclude a directory if a file is present
        (Iakov Davydov)
    -   rmdirs: add --leave-root flag (lewapm)
    -   move: add --delete-empty-src-dirs flag to remove dirs after move
        (Ishuah Kariuki)
    -   Add --dump flag, introduce --dump requests, responses and remove
        --dump-auth, --dump-filters
        -   Obscure X-Auth-Token: from headers when dumping too
    -   Document and implement exit codes for different failure modes
        (Ishuah Kariuki)
-   Compile
-   Bug Fixes
    -   Retry lots more different types of errors to make multipart
        transfers more reliable
    -   Save the config before asking for a token, fixes disappearing
        oauth config
    -   Warn the user if --include and --exclude are used together
        (Ernest Borowski)
    -   Fix duplicate files (e.g. on Google drive) causing spurious
        copies
    -   Allow trailing and leading whitespace for passwords (Jason Rose)
    -   ncdu: fix crashes on empty directories
    -   rcat: fix goroutine leak
    -   moveto/copyto: Fix to allow copying to the same name
-   Mount
    -   --vfs-cache mode to make writes into mounts more reliable.
        -   this requires caching files on the disk (see --cache-dir)
        -   As this is a new feature, use with care
    -   Use sdnotify to signal systemd the mount is ready (Fabian
        Möller)
    -   Check if directory is not empty before mounting (Ernest
        Borowski)
-   Local
    -   Add error message for cross file system moves
    -   Fix equality check for times
-   Dropbox
    -   Rework multipart upload
        -   buffer the chunks when uploading large files so they can be
            retried
        -   change default chunk size to 48MB now we are buffering them
            in memory
        -   retry every error after the first chunk is done successfully
    -   Fix error when renaming directories
-   Swift
    -   Fix crash on bad authentication
-   Google Drive
    -   Add service account support (Tim Cooijmans)
-   S3
    -   Make it work properly with Digital Ocean Spaces (Andrew
        Starr-Bochicchio)
    -   Fix crash if a bad listing is received
    -   Add support for ECS task IAM roles (David Minor)
-   Backblaze B2
    -   Fix multipart upload retries
    -   Fix --hard-delete to make it work 100% of the time
-   Swift
    -   Allow authentication with storage URL and auth key (Giovanni
        Pizzi)
    -   Add new fields for swift configuration to support IBM Bluemix
        Swift (Pierre Carlson)
    -   Add OS_TENANT_ID and OS_USER_ID to config
    -   Allow configs with user id instead of user name
    -   Check if swift segments container exists before creating (John
        Leach)
    -   Fix memory leak in swift transfers (upstream fix)
-   SFTP
    -   Add option to enable the use of aes128-cbc cipher (Jon Fautley)
-   Amazon cloud drive
    -   Fix download of large files failing with "Only one auth
        mechanism allowed"
-   crypt
    -   Option to encrypt directory names or leave them intact
    -   Implement DirChangeNotify (Fabian Möller)
-   onedrive
    -   Add option to choose resourceURL during setup of OneDrive
        Business account if more than one is available for user

v1.38 - 2017-09-30

-   New backends
    -   Azure Blob Storage (thanks Andrei Dragomir)
    -   Box
    -   Onedrive for Business (thanks Oliver Heyme)
    -   QingStor from QingCloud (thanks wuyu)
-   New commands
    -   rcat - read from standard input and stream upload
    -   tree - shows a nicely formatted recursive listing
    -   cryptdecode - decode encrypted file names (thanks ishuah)
    -   config show - print the config file
    -   config file - print the config file location
-   New Features
    -   Empty directories are deleted on sync
    -   dedupe - implement merging of duplicate directories
    -   check and cryptcheck made more consistent and use less memory
    -   cleanup for remaining remotes (thanks ishuah)
    -   --immutable for ensuring that files don't change (thanks Jacob
        McNamee)
    -   --user-agent option (thanks Alex McGrath Kraak)
    -   --disable flag to disable optional features
    -   --bind flag for choosing the local addr on outgoing connections
    -   Support for zsh auto-completion (thanks bpicode)
    -   Stop normalizing file names but do a normalized compare in sync
-   Compile
    -   Update to using go1.9 as the default go version
    -   Remove snapd build due to maintenance problems
-   Bug Fixes
    -   Improve retriable error detection which makes multipart uploads
        better
    -   Make check obey --ignore-size
    -   Fix bwlimit toggle in conjunction with schedules (thanks
        cbruegg)
    -   config ensures newly written config is on the same mount
-   Local
    -   Revert to copy when moving file across file system boundaries
    -   --skip-links to suppress symlink warnings (thanks Zhiming Wang)
-   Mount
    -   Reuse rcat internals to support uploads from all remotes
-   Dropbox
    -   Fix "entry doesn't belong in directory" error
    -   Stop using deprecated API methods
-   Swift
    -   Fix server-side copy to empty container with --fast-list
-   Google Drive
    -   Change the default for --drive-use-trash to true
-   S3
    -   Set session token when using STS (thanks Girish Ramakrishnan)
    -   Glacier docs and error messages (thanks Jan Varho)
    -   Read 1000 (not 1024) items in dir listings to fix Wasabi
-   Backblaze B2
    -   Fix SHA1 mismatch when downloading files with no SHA1
    -   Calculate missing hashes on the fly instead of spooling
    -   --b2-hard-delete to permanently delete (not hide) files (thanks
        John Papandriopoulos)
-   Hubic
    -   Fix creating containers - no longer have to use the default
        container
-   Swift
    -   Optionally configure from a standard set of OpenStack
        environment vars
    -   Add endpoint_type config
-   Google Cloud Storage
    -   Fix bucket creation to work with limited permission users
-   SFTP
    -   Implement connection pooling for multiple ssh connections
    -   Limit new connections per second
    -   Add support for MD5 and SHA1 hashes where available (thanks
        Christian Brüggemann)
-   HTTP
    -   Fix URL encoding issues
    -   Fix directories with : in
    -   Fix panic with URL encoded content

v1.37 - 2017-07-22

-   New backends
    -   FTP - thanks to Antonio Messina
    -   HTTP - thanks to Vasiliy Tolstov
-   New commands
    -   rclone ncdu - for exploring a remote with a text based user
        interface.
    -   rclone lsjson - for listing with a machine-readable output
    -   rclone dbhashsum - to show Dropbox style hashes of files (local
        or Dropbox)
-   New Features
    -   Implement --fast-list flag
        -   This allows remotes to list recursively if they can
        -   This uses less transactions (important if you pay for them)
        -   This may or may not be quicker
        -   This will use more memory as it has to hold the listing in
            memory
        -   --old-sync-method deprecated - the remaining uses are
            covered by --fast-list
        -   This involved a major re-write of all the listing code
    -   Add --tpslimit and --tpslimit-burst to limit transactions per
        second
        -   this is useful in conjunction with rclone mount to limit
            external apps
    -   Add --stats-log-level so can see --stats without -v
    -   Print password prompts to stderr - Hraban Luyat
    -   Warn about duplicate files when syncing
    -   Oauth improvements
        -   allow auth_url and token_url to be set in the config file
        -   Print redirection URI if using own credentials.
    -   Don't Mkdir at the start of sync to save transactions
-   Compile
    -   Update build to go1.8.3
    -   Require go1.6 for building rclone
    -   Compile 386 builds with "GO386=387" for maximum compatibility
-   Bug Fixes
    -   Fix menu selection when no remotes
    -   Config saving reworked to not kill the file if disk gets full
    -   Don't delete remote if name does not change while renaming
    -   moveto, copyto: report transfers and checks as per move and copy
-   Local
    -   Add --local-no-unicode-normalization flag - Bob Potter
-   Mount
    -   Now supported on Windows using cgofuse and WinFsp - thanks to
        Bill Zissimopoulos for much help
    -   Compare checksums on upload/download via FUSE
    -   Unmount when program ends with SIGINT (Ctrl+C) or SIGTERM -
        Jérôme Vizcaino
    -   On read only open of file, make open pending until first read
    -   Make --read-only reject modify operations
    -   Implement ModTime via FUSE for remotes that support it
    -   Allow modTime to be changed even before all writers are closed
    -   Fix panic on renames
    -   Fix hang on errored upload
-   Crypt
    -   Report the name:root as specified by the user
    -   Add an "obfuscate" option for filename encryption - Stephen
        Harris
-   Amazon Drive
    -   Fix initialization order for token renewer
    -   Remove revoked credentials, allow oauth proxy config and update
        docs
-   B2
    -   Reduce minimum chunk size to 5MB
-   Drive
    -   Add team drive support
    -   Reduce bandwidth by adding fields for partial responses - Martin
        Kristensen
    -   Implement --drive-shared-with-me flag to view shared with me
        files - Danny Tsai
    -   Add --drive-trashed-only to read only the files in the trash
    -   Remove obsolete --drive-full-list
    -   Add missing seek to start on retries of chunked uploads
    -   Fix stats accounting for upload
    -   Convert / in names to a unicode equivalent (／)
    -   Poll for Google Drive changes when mounted
-   OneDrive
    -   Fix the uploading of files with spaces
    -   Fix initialization order for token renewer
    -   Display speeds accurately when uploading - Yoni Jah
    -   Swap to using http://localhost:53682/ as redirect URL - Michael
        Ledin
    -   Retry on token expired error, reset upload body on retry - Yoni
        Jah
-   Google Cloud Storage
    -   Add ability to specify location and storage class via config and
        command line - thanks gdm85
    -   Create container if necessary on server-side copy
    -   Increase directory listing chunk to 1000 to increase performance
    -   Obtain a refresh token for GCS - Steven Lu
-   Yandex
    -   Fix the name reported in log messages (was empty)
    -   Correct error return for listing empty directory
-   Dropbox
    -   Rewritten to use the v2 API
        -   Now supports ModTime
            -   Can only set by uploading the file again
            -   If you uploaded with an old rclone, rclone may upload
                everything again
            -   Use --size-only or --checksum to avoid this
        -   Now supports the Dropbox content hashing scheme
        -   Now supports low level retries
-   S3
    -   Work around eventual consistency in bucket creation
    -   Create container if necessary on server-side copy
    -   Add us-east-2 (Ohio) and eu-west-2 (London) S3 regions - Zahiar
        Ahmed
-   Swift, Hubic
    -   Fix zero length directory markers showing in the subdirectory
        listing
        -   this caused lots of duplicate transfers
    -   Fix paged directory listings
        -   this caused duplicate directory errors
    -   Create container if necessary on server-side copy
    -   Increase directory listing chunk to 1000 to increase performance
    -   Make sensible error if the user forgets the container
-   SFTP
    -   Add support for using ssh key files
    -   Fix under Windows
    -   Fix ssh agent on Windows
    -   Adapt to latest version of library - Igor Kharin

v1.36 - 2017-03-18

-   New Features
    -   SFTP remote (Jack Schmidt)
    -   Re-implement sync routine to work a directory at a time reducing
        memory usage
    -   Logging revamped to be more inline with rsync - now much quieter
        -   -v only shows transfers
        -   -vv is for full debug
        -   --syslog to log to syslog on capable platforms
    -   Implement --backup-dir and --suffix
    -   Implement --track-renames (initial implementation by Bjørn Erik
        Pedersen)
    -   Add time-based bandwidth limits (Lukas Loesche)
    -   rclone cryptcheck: checks integrity of crypt remotes
    -   Allow all config file variables and options to be set from
        environment variables
    -   Add --buffer-size parameter to control buffer size for copy
    -   Make --delete-after the default
    -   Add --ignore-checksum flag (fixed by Hisham Zarka)
    -   rclone check: Add --download flag to check all the data, not
        just hashes
    -   rclone cat: add --head, --tail, --offset, --count and --discard
    -   rclone config: when choosing from a list, allow the value to be
        entered too
    -   rclone config: allow rename and copy of remotes
    -   rclone obscure: for generating encrypted passwords for rclone's
        config (T.C. Ferguson)
    -   Comply with XDG Base Directory specification (Dario Giovannetti)
        -   this moves the default location of the config file in a
            backwards compatible way
    -   Release changes
        -   Ubuntu snap support (Dedsec1)
        -   Compile with go 1.8
        -   MIPS/Linux big and little endian support
-   Bug Fixes
    -   Fix copyto copying things to the wrong place if the destination
        dir didn't exist
    -   Fix parsing of remotes in moveto and copyto
    -   Fix --delete-before deleting files on copy
    -   Fix --files-from with an empty file copying everything
    -   Fix sync: don't update mod times if --dry-run set
    -   Fix MimeType propagation
    -   Fix filters to add ** rules to directory rules
-   Local
    -   Implement -L, --copy-links flag to allow rclone to follow
        symlinks
    -   Open files in write only mode so rclone can write to an rclone
        mount
    -   Fix unnormalised unicode causing problems reading directories
    -   Fix interaction between -x flag and --max-depth
-   Mount
    -   Implement proper directory handling (mkdir, rmdir, renaming)
    -   Make include and exclude filters apply to mount
    -   Implement read and write async buffers - control with
        --buffer-size
    -   Fix fsync on for directories
    -   Fix retry on network failure when reading off crypt
-   Crypt
    -   Add --crypt-show-mapping to show encrypted file mapping
    -   Fix crypt writer getting stuck in a loop
        -   IMPORTANT this bug had the potential to cause data
            corruption when
            -   reading data from a network based remote and
            -   writing to a crypt on Google Drive
        -   Use the cryptcheck command to validate your data if you are
            concerned
        -   If syncing two crypt remotes, sync the unencrypted remote
-   Amazon Drive
    -   Fix panics on Move (rename)
    -   Fix panic on token expiry
-   B2
    -   Fix inconsistent listings and rclone check
    -   Fix uploading empty files with go1.8
    -   Constrain memory usage when doing multipart uploads
    -   Fix upload url not being refreshed properly
-   Drive
    -   Fix Rmdir on directories with trashed files
    -   Fix "Ignoring unknown object" when downloading
    -   Add --drive-list-chunk
    -   Add --drive-skip-gdocs (Károly Oláh)
-   OneDrive
    -   Implement Move
    -   Fix Copy
        -   Fix overwrite detection in Copy
        -   Fix waitForJob to parse errors correctly
    -   Use token renewer to stop auth errors on long uploads
    -   Fix uploading empty files with go1.8
-   Google Cloud Storage
    -   Fix depth 1 directory listings
-   Yandex
    -   Fix single level directory listing
-   Dropbox
    -   Normalise the case for single level directory listings
    -   Fix depth 1 listing
-   S3
    -   Added ca-central-1 region (Jon Yergatian)

v1.35 - 2017-01-02

-   New Features
    -   moveto and copyto commands for choosing a destination name on
        copy/move
    -   rmdirs command to recursively delete empty directories
    -   Allow repeated --include/--exclude/--filter options
    -   Only show transfer stats on commands which transfer stuff
        -   show stats on any command using the --stats flag
    -   Allow overlapping directories in move when server-side dir move
        is supported
    -   Add --stats-unit option - thanks Scott McGillivray
-   Bug Fixes
    -   Fix the config file being overwritten when two rclone instances
        are running
    -   Make rclone lsd obey the filters properly
    -   Fix compilation on mips
    -   Fix not transferring files that don't differ in size
    -   Fix panic on nil retry/fatal error
-   Mount
    -   Retry reads on error - should help with reliability a lot
    -   Report the modification times for directories from the remote
    -   Add bandwidth accounting and limiting (fixes --bwlimit)
    -   If --stats provided will show stats and which files are
        transferring
    -   Support R/W files if truncate is set.
    -   Implement statfs interface so df works
    -   Note that write is now supported on Amazon Drive
    -   Report number of blocks in a file - thanks Stefan Breunig
-   Crypt
    -   Prevent the user pointing crypt at itself
    -   Fix failed to authenticate decrypted block errors
        -   these will now return the underlying unexpected EOF instead
-   Amazon Drive
    -   Add support for server-side move and directory move - thanks
        Stefan Breunig
    -   Fix nil pointer deref on size attribute
-   B2
    -   Use new prefix and delimiter parameters in directory listings
        -   This makes --max-depth 1 dir listings as used in mount much
            faster
    -   Reauth the account while doing uploads too - should help with
        token expiry
-   Drive
    -   Make DirMove more efficient and complain about moving the root
    -   Create destination directory on Move()

v1.34 - 2016-11-06

-   New Features
    -   Stop single file and --files-from operations iterating through
        the source bucket.
    -   Stop removing failed upload to cloud storage remotes
    -   Make ContentType be preserved for cloud to cloud copies
    -   Add support to toggle bandwidth limits via SIGUSR2 - thanks
        Marco Paganini
    -   rclone check shows count of hashes that couldn't be checked
    -   rclone listremotes command
    -   Support linux/arm64 build - thanks Fredrik Fornwall
    -   Remove Authorization: lines from --dump-headers output
-   Bug Fixes
    -   Ignore files with control characters in the names
    -   Fix rclone move command
        -   Delete src files which already existed in dst
        -   Fix deletion of src file when dst file older
    -   Fix rclone check on encrypted file systems
    -   Make failed uploads not count as "Transferred"
    -   Make sure high level retries show with -q
    -   Use a vendor directory with godep for repeatable builds
-   rclone mount - FUSE
    -   Implement FUSE mount options
        -   --no-modtime, --debug-fuse, --read-only, --allow-non-empty,
            --allow-root, --allow-other
        -   --default-permissions, --write-back-cache, --max-read-ahead,
            --umask, --uid, --gid
    -   Add --dir-cache-time to control caching of directory entries
    -   Implement seek for files opened for read (useful for video
        players)
        -   with -no-seek flag to disable
    -   Fix crash on 32 bit ARM (alignment of 64 bit counter)
    -   ...and many more internal fixes and improvements!
-   Crypt
    -   Don't show encrypted password in configurator to stop confusion
-   Amazon Drive
    -   New wait for upload option --acd-upload-wait-per-gb
        -   upload timeouts scale by file size and can be disabled
    -   Add 502 Bad Gateway to list of errors we retry
    -   Fix overwriting a file with a zero length file
    -   Fix ACD file size warning limit - thanks Felix Bünemann
-   Local
    -   Unix: implement -x/--one-file-system to stay on a single file
        system
        -   thanks Durval Menezes and Luiz Carlos Rumbelsperger Viana
    -   Windows: ignore the symlink bit on files
    -   Windows: Ignore directory-based junction points
-   B2
    -   Make sure each upload has at least one upload slot - fixes
        strange upload stats
    -   Fix uploads when using crypt
    -   Fix download of large files (sha1 mismatch)
    -   Return error when we try to create a bucket which someone else
        owns
    -   Update B2 docs with Data usage, and Crypt section - thanks
        Tomasz Mazur
-   S3
    -   Command line and config file support for
        -   Setting/overriding ACL - thanks Radek Šenfeld
        -   Setting storage class - thanks Asko Tamm
-   Drive
    -   Make exponential backoff work exactly as per Google
        specification
    -   add .epub, .odp and .tsv as export formats.
-   Swift
    -   Don't read metadata for directory marker objects

v1.33 - 2016-08-24

-   New Features
    -   Implement encryption
        -   data encrypted in NACL secretbox format
        -   with optional file name encryption
    -   New commands
        -   rclone mount - implements FUSE mounting of remotes
            (EXPERIMENTAL)
            -   works on Linux, FreeBSD and OS X (need testers for the
                last 2!)
        -   rclone cat - outputs remote file or files to the terminal
        -   rclone genautocomplete - command to make a bash completion
            script for rclone
    -   Editing a remote using rclone config now goes through the wizard
    -   Compile with go 1.7 - this fixes rclone on macOS Sierra and on
        386 processors
    -   Use cobra for sub commands and docs generation
-   drive
    -   Document how to make your own client_id
-   s3
    -   User-configurable Amazon S3 ACL (thanks Radek Šenfeld)
-   b2
    -   Fix stats accounting for upload - no more jumping to 100% done
    -   On cleanup delete hide marker if it is the current file
    -   New B2 API endpoint (thanks Per Cederberg)
    -   Set maximum backoff to 5 Minutes
-   onedrive
    -   Fix URL escaping in file names - e.g. uploading files with + in
        them.
-   amazon cloud drive
    -   Fix token expiry during large uploads
    -   Work around 408 REQUEST_TIMEOUT and 504 GATEWAY_TIMEOUT errors
-   local
    -   Fix filenames with invalid UTF-8 not being uploaded
    -   Fix problem with some UTF-8 characters on OS X

v1.32 - 2016-07-13

-   Backblaze B2
    -   Fix upload of files large files not in root

v1.31 - 2016-07-13

-   New Features
    -   Reduce memory on sync by about 50%
    -   Implement --no-traverse flag to stop copy traversing the
        destination remote.
        -   This can be used to reduce memory usage down to the smallest
            possible.
        -   Useful to copy a small number of files into a large
            destination folder.
    -   Implement cleanup command for emptying trash / removing old
        versions of files
        -   Currently B2 only
    -   Single file handling improved
        -   Now copied with --files-from
        -   Automatically sets --no-traverse when copying a single file
    -   Info on using installing with ansible - thanks Stefan Weichinger
    -   Implement --no-update-modtime flag to stop rclone fixing the
        remote modified times.
-   Bug Fixes
    -   Fix move command - stop it running for overlapping Fses - this
        was causing data loss.
-   Local
    -   Fix incomplete hashes - this was causing problems for B2.
-   Amazon Drive
    -   Rename Amazon Cloud Drive to Amazon Drive - no changes to config
        file needed.
-   Swift
    -   Add support for non-default project domain - thanks Antonio
        Messina.
-   S3
    -   Add instructions on how to use rclone with minio.
    -   Add ap-northeast-2 (Seoul) and ap-south-1 (Mumbai) regions.
    -   Skip setting the modified time for objects > 5GB as it isn't
        possible.
-   Backblaze B2
    -   Add --b2-versions flag so old versions can be listed and
        retrieved.
    -   Treat 403 errors (e.g. cap exceeded) as fatal.
    -   Implement cleanup command for deleting old file versions.
    -   Make error handling compliant with B2 integrations notes.
    -   Fix handling of token expiry.
    -   Implement --b2-test-mode to set X-Bz-Test-Mode header.
    -   Set cutoff for chunked upload to 200MB as per B2 guidelines.
    -   Make upload multi-threaded.
-   Dropbox
    -   Don't retry 461 errors.

v1.30 - 2016-06-18

-   New Features
    -   Directory listing code reworked for more features and better
        error reporting (thanks to Klaus Post for help). This enables
        -   Directory include filtering for efficiency
        -   --max-depth parameter
        -   Better error reporting
        -   More to come
    -   Retry more errors
    -   Add --ignore-size flag - for uploading images to onedrive
    -   Log -v output to stdout by default
    -   Display the transfer stats in more human-readable form
    -   Make 0 size files specifiable with --max-size 0b
    -   Add b suffix so we can specify bytes in --bwlimit, --min-size,
        etc.
    -   Use "password:" instead of "password>" prompt - thanks Klaus
        Post and Leigh Klotz
-   Bug Fixes
    -   Fix retry doing one too many retries
-   Local
    -   Fix problems with OS X and UTF-8 characters
-   Amazon Drive
    -   Check a file exists before uploading to help with 408 Conflict
        errors
    -   Reauth on 401 errors - this has been causing a lot of problems
    -   Work around spurious 403 errors
    -   Restart directory listings on error
-   Google Drive
    -   Check a file exists before uploading to help with duplicates
    -   Fix retry of multipart uploads
-   Backblaze B2
    -   Implement large file uploading
-   S3
    -   Add AES256 server-side encryption for - thanks Justin R. Wilson
-   Google Cloud Storage
    -   Make sure we don't use conflicting content types on upload
    -   Add service account support - thanks Michal Witkowski
-   Swift
    -   Add auth version parameter
    -   Add domain option for openstack (v3 auth) - thanks Fabian Ruff

v1.29 - 2016-04-18

-   New Features
    -   Implement -I, --ignore-times for unconditional upload
    -   Improve dedupecommand
        -   Now removes identical copies without asking
        -   Now obeys --dry-run
        -   Implement --dedupe-mode for non interactive running
            -   --dedupe-mode interactive - interactive the default.
            -   --dedupe-mode skip - removes identical files then skips
                anything left.
            -   --dedupe-mode first - removes identical files then keeps
                the first one.
            -   --dedupe-mode newest - removes identical files then
                keeps the newest one.
            -   --dedupe-mode oldest - removes identical files then
                keeps the oldest one.
            -   --dedupe-mode rename - removes identical files then
                renames the rest to be different.
-   Bug fixes
    -   Make rclone check obey the --size-only flag.
    -   Use "application/octet-stream" if discovered mime type is
        invalid.
    -   Fix missing "quit" option when there are no remotes.
-   Google Drive
    -   Increase default chunk size to 8 MB - increases upload speed of
        big files
    -   Speed up directory listings and make more reliable
    -   Add missing retries for Move and DirMove - increases reliability
    -   Preserve mime type on file update
-   Backblaze B2
    -   Enable mod time syncing
        -   This means that B2 will now check modification times
        -   It will upload new files to update the modification times
        -   (there isn't an API to just set the mod time.)
        -   If you want the old behaviour use --size-only.
    -   Update API to new version
    -   Fix parsing of mod time when not in metadata
-   Swift/Hubic
    -   Don't return an MD5SUM for static large objects
-   S3
    -   Fix uploading files bigger than 50GB

v1.28 - 2016-03-01

-   New Features
    -   Configuration file encryption - thanks Klaus Post
    -   Improve rclone config adding more help and making it easier to
        understand
    -   Implement -u/--update so creation times can be used on all
        remotes
    -   Implement --low-level-retries flag
    -   Optionally disable gzip compression on downloads with
        --no-gzip-encoding
-   Bug fixes
    -   Don't make directories if --dry-run set
    -   Fix and document the move command
    -   Fix redirecting stderr on unix-like OSes when using --log-file
    -   Fix delete command to wait until all finished - fixes missing
        deletes.
-   Backblaze B2
    -   Use one upload URL per go routine fixes
        more than one upload using auth token
    -   Add pacing, retries and reauthentication - fixes token expiry
        problems
    -   Upload without using a temporary file from local (and remotes
        which support SHA1)
    -   Fix reading metadata for all files when it shouldn't have been
-   Drive
    -   Fix listing drive documents at root
    -   Disable copy and move for Google docs
-   Swift
    -   Fix uploading of chunked files with non ASCII characters
    -   Allow setting of storage_url in the config - thanks Xavier Lucas
-   S3
    -   Allow IAM role and credentials from environment variables -
        thanks Brian Stengaard
    -   Allow low privilege users to use S3 (check if directory exists
        during Mkdir) - thanks Jakub Gedeon
-   Amazon Drive
    -   Retry on more things to make directory listings more reliable

v1.27 - 2016-01-31

-   New Features
    -   Easier headless configuration with rclone authorize
    -   Add support for multiple hash types - we now check SHA1 as well
        as MD5 hashes.
    -   delete command which does obey the filters (unlike purge)
    -   dedupe command to deduplicate a remote. Useful with Google
        Drive.
    -   Add --ignore-existing flag to skip all files that exist on
        destination.
    -   Add --delete-before, --delete-during, --delete-after flags.
    -   Add --memprofile flag to debug memory use.
    -   Warn the user about files with same name but different case
    -   Make --include rules add their implicit exclude * at the end of
        the filter list
    -   Deprecate compiling with go1.3
-   Amazon Drive
    -   Fix download of files > 10 GB
    -   Fix directory traversal ("Next token is expired") for large
        directory listings
    -   Remove 409 conflict from error codes we will retry - stops very
        long pauses
-   Backblaze B2
    -   SHA1 hashes now checked by rclone core
-   Drive
    -   Add --drive-auth-owner-only to only consider files owned by the
        user - thanks Björn Harrtell
    -   Export Google documents
-   Dropbox
    -   Make file exclusion error controllable with -q
-   Swift
    -   Fix upload from unprivileged user.
-   S3
    -   Fix updating of mod times of files with + in.
-   Local
    -   Add local file system option to disable UNC on Windows.

v1.26 - 2016-01-02

-   New Features
    -   Yandex storage backend - thank you Dmitry Burdeev ("dibu")
    -   Implement Backblaze B2 storage backend
    -   Add --min-age and --max-age flags - thank you Adriano Aurélio
        Meirelles
    -   Make ls/lsl/md5sum/size/check obey includes and excludes
-   Fixes
    -   Fix crash in http logging
    -   Upload releases to github too
-   Swift
    -   Fix sync for chunked files
-   OneDrive
    -   Re-enable server-side copy
    -   Don't mask HTTP error codes with JSON decode error
-   S3
    -   Fix corrupting Content-Type on mod time update (thanks Joseph
        Spurrier)

v1.25 - 2015-11-14

-   New features
    -   Implement Hubic storage system
-   Fixes
    -   Fix deletion of some excluded files without --delete-excluded
        -   This could have deleted files unexpectedly on sync
        -   Always check first with --dry-run!
-   Swift
    -   Stop SetModTime losing metadata (e.g. X-Object-Manifest)
        -   This could have caused data loss for files > 5GB in size
    -   Use ContentType from Object to avoid lookups in listings
-   OneDrive
    -   disable server-side copy as it seems to be broken at Microsoft

v1.24 - 2015-11-07

-   New features
    -   Add support for Microsoft OneDrive
    -   Add --no-check-certificate option to disable server certificate
        verification
    -   Add async readahead buffer for faster transfer of big files
-   Fixes
    -   Allow spaces in remotes and check remote names for validity at
        creation time
    -   Allow '&' and disallow ':' in Windows filenames.
-   Swift
    -   Ignore directory marker objects where appropriate - allows
        working with Hubic
    -   Don't delete the container if fs wasn't at root
-   S3
    -   Don't delete the bucket if fs wasn't at root
-   Google Cloud Storage
    -   Don't delete the bucket if fs wasn't at root

v1.23 - 2015-10-03

-   New features
    -   Implement rclone size for measuring remotes
-   Fixes
    -   Fix headless config for drive and gcs
    -   Tell the user they should try again if the webserver method
        failed
    -   Improve output of --dump-headers
-   S3
    -   Allow anonymous access to public buckets
-   Swift
    -   Stop chunked operations logging "Failed to read info: Object Not
        Found"
    -   Use Content-Length on uploads for extra reliability

v1.22 - 2015-09-28

-   Implement rsync like include and exclude flags
-   swift
    -   Support files > 5GB - thanks Sergey Tolmachev

v1.21 - 2015-09-22

-   New features
    -   Display individual transfer progress
    -   Make lsl output times in localtime
-   Fixes
    -   Fix allowing user to override credentials again in Drive, GCS
        and ACD
-   Amazon Drive
    -   Implement compliant pacing scheme
-   Google Drive
    -   Make directory reads concurrent for increased speed.

v1.20 - 2015-09-15

-   New features
    -   Amazon Drive support
    -   Oauth support redone - fix many bugs and improve usability
        -   Use "golang.org/x/oauth2" as oauth library of choice
        -   Improve oauth usability for smoother initial signup
        -   drive, googlecloudstorage: optionally use auto config for
            the oauth token
    -   Implement --dump-headers and --dump-bodies debug flags
    -   Show multiple matched commands if abbreviation too short
    -   Implement server-side move where possible
-   local
    -   Always use UNC paths internally on Windows - fixes a lot of bugs
-   dropbox
    -   force use of our custom transport which makes timeouts work
-   Thanks to Klaus Post for lots of help with this release

v1.19 - 2015-08-28

-   New features
    -   Server side copies for s3/swift/drive/dropbox/gcs
    -   Move command - uses server-side copies if it can
    -   Implement --retries flag - tries 3 times by default
    -   Build for plan9/amd64 and solaris/amd64 too
-   Fixes
    -   Make a current version download with a fixed URL for scripting
    -   Ignore rmdir in limited fs rather than throwing error
-   dropbox
    -   Increase chunk size to improve upload speeds massively
    -   Issue an error message when trying to upload bad file name

v1.18 - 2015-08-17

-   drive
    -   Add --drive-use-trash flag so rclone trashes instead of deletes
    -   Add "Forbidden to download" message for files with no
        downloadURL
-   dropbox
    -   Remove datastore
        -   This was deprecated and it caused a lot of problems
        -   Modification times and MD5SUMs no longer stored
    -   Fix uploading files > 2GB
-   s3
    -   use official AWS SDK from github.com/aws/aws-sdk-go
    -   NB will most likely require you to delete and recreate remote
    -   enable multipart upload which enables files > 5GB
    -   tested with Ceph / RadosGW / S3 emulation
    -   many thanks to Sam Liston and Brian Haymore at the Utah Center
        for High Performance Computing for a Ceph test account
-   misc
    -   Show errors when reading the config file
    -   Do not print stats in quiet mode - thanks Leonid Shalupov
    -   Add FAQ
    -   Fix created directories not obeying umask
    -   Linux installation instructions - thanks Shimon Doodkin

v1.17 - 2015-06-14

-   dropbox: fix case insensitivity issues - thanks Leonid Shalupov

v1.16 - 2015-06-09

-   Fix uploading big files which was causing timeouts or panics
-   Don't check md5sum after download with --size-only

v1.15 - 2015-06-06

-   Add --checksum flag to only discard transfers by MD5SUM - thanks
    Alex Couper
-   Implement --size-only flag to sync on size not checksum & modtime
-   Expand docs and remove duplicated information
-   Document rclone's limitations with directories
-   dropbox: update docs about case insensitivity

v1.14 - 2015-05-21

-   local: fix encoding of non utf-8 file names - fixes a duplicate file
    problem
-   drive: docs about rate limiting
-   google cloud storage: Fix compile after API change in
    "google.golang.org/api/storage/v1"

v1.13 - 2015-05-10

-   Revise documentation (especially sync)
-   Implement --timeout and --conntimeout
-   s3: ignore etags from multipart uploads which aren't md5sums

v1.12 - 2015-03-15

-   drive: Use chunked upload for files above a certain size
-   drive: add --drive-chunk-size and --drive-upload-cutoff parameters
-   drive: switch to insert from update when a failed copy deletes the
    upload
-   core: Log duplicate files if they are detected

v1.11 - 2015-03-04

-   swift: add region parameter
-   drive: fix crash on failed to update remote mtime
-   In remote paths, change native directory separators to /
-   Add synchronization to ls/lsl/lsd output to stop corruptions
-   Ensure all stats/log messages to go stderr
-   Add --log-file flag to log everything (including panics) to file
-   Make it possible to disable stats printing with --stats=0
-   Implement --bwlimit to limit data transfer bandwidth

v1.10 - 2015-02-12

-   s3: list an unlimited number of items
-   Fix getting stuck in the configurator

v1.09 - 2015-02-07

-   windows: Stop drive letters (e.g. C:) getting mixed up with remotes
    (e.g. drive:)
-   local: Fix directory separators on Windows
-   drive: fix rate limit exceeded errors

v1.08 - 2015-02-04

-   drive: fix subdirectory listing to not list entire drive
-   drive: Fix SetModTime
-   dropbox: adapt code to recent library changes

v1.07 - 2014-12-23

-   google cloud storage: fix memory leak

v1.06 - 2014-12-12

-   Fix "Couldn't find home directory" on OSX
-   swift: Add tenant parameter
-   Use new location of Google API packages

v1.05 - 2014-08-09

-   Improved tests and consequently lots of minor fixes
-   core: Fix race detected by go race detector
-   core: Fixes after running errcheck
-   drive: reset root directory on Rmdir and Purge
-   fs: Document that Purger returns error on empty directory, test and
    fix
-   google cloud storage: fix ListDir on subdirectory
-   google cloud storage: re-read metadata in SetModTime
-   s3: make reading metadata more reliable to work around eventual
    consistency problems
-   s3: strip trailing / from ListDir()
-   swift: return directories without / in ListDir

v1.04 - 2014-07-21

-   google cloud storage: Fix crash on Update

v1.03 - 2014-07-20

-   swift, s3, dropbox: fix updated files being marked as corrupted
-   Make compile with go 1.1 again

v1.02 - 2014-07-19

-   Implement Dropbox remote
-   Implement Google Cloud Storage remote
-   Verify Md5sums and Sizes after copies
-   Remove times from "ls" command - lists sizes only
-   Add add "lsl" - lists times and sizes
-   Add "md5sum" command

v1.01 - 2014-07-04

-   drive: fix transfer of big files using up lots of memory

v1.00 - 2014-07-03

-   drive: fix whole second dates

v0.99 - 2014-06-26

-   Fix --dry-run not working
-   Make compatible with go 1.1

v0.98 - 2014-05-30

-   s3: Treat missing Content-Length as 0 for some ceph installations
-   rclonetest: add file with a space in

v0.97 - 2014-05-05

-   Implement copying of single files
-   s3 & swift: support paths inside containers/buckets

v0.96 - 2014-04-24

-   drive: Fix multiple files of same name being created
-   drive: Use o.Update and fs.Put to optimise transfers
-   Add version number, -V and --version

v0.95 - 2014-03-28

-   rclone.org: website, docs and graphics
-   drive: fix path parsing

v0.94 - 2014-03-27

-   Change remote format one last time
-   GNU style flags

v0.93 - 2014-03-16

-   drive: store token in config file
-   cross compile other versions
-   set strict permissions on config file

v0.92 - 2014-03-15

-   Config fixes and --config option

v0.91 - 2014-03-15

-   Make config file

v0.90 - 2013-06-27

-   Project named rclone

v0.00 - 2012-11-18

-   Project started

Bugs and Limitations

Limitations

Directory timestamps aren't preserved on some backends

As of v1.66, rclone supports syncing directory modtimes, if the backend
supports it. Some backends do not support it -- see overview for a
complete list. Additionally, note that empty directories are not synced
by default (this can be enabled with --create-empty-src-dirs.)

Rclone struggles with millions of files in a directory/bucket

Currently rclone loads each directory/bucket entirely into memory before
using it. Since each rclone object takes 0.5k-1k of memory this can take
a very long time and use a large amount of memory.

Millions of files in a directory tends to occur on bucket-based remotes
(e.g. S3 buckets) since those remotes do not segregate subdirectories
within the bucket.

Bucket-based remotes and folders

Bucket-based remotes (e.g. S3/GCS/Swift/B2) do not have a concept of
directories. Rclone therefore cannot create directories in them which
means that empty directories on a bucket-based remote will tend to
disappear.

Some software creates empty keys ending in / as directory markers.
Rclone doesn't do this as it potentially creates more objects and costs
more. This ability may be added in the future (probably via a
flag/option).

Bugs

Bugs are stored in rclone's GitHub project:

-   Reported bugs
-   Known issues

Frequently Asked Questions

Do all cloud storage systems support all rclone commands

Yes they do. All the rclone commands (e.g. sync, copy, etc.) will work
on all the remote storage systems.

Can I copy the config from one machine to another

Sure! Rclone stores all of its config in a single file. If you want to
find this file, run rclone config file which will tell you where it is.

See the remote setup docs for more info.

How do I configure rclone on a remote / headless box with no browser?

This has now been documented in its own remote setup page.

How can I get rid of the "Config file not found" notice?

If you see a notice like 'NOTICE: Config file "rclone.conf" not found',
this means you have not configured any remotes.

If you need to configure a remote, see the config help docs.

If you are using rclone entirely with on the fly remotes, you can create
an empty config file to get rid of this notice, for example:

    rclone config touch

Can rclone sync directly from drive to s3

Rclone can sync between two remote cloud storage systems just fine.

Note that it effectively downloads the file and uploads it again, so the
node running rclone would need to have lots of bandwidth.

The syncs would be incremental (on a file by file basis).

e.g.

    rclone sync --interactive drive:Folder s3:bucket

Using rclone from multiple locations at the same time

You can use rclone from multiple places at the same time if you choose
different subdirectory for the output, e.g.

    Server A> rclone sync --interactive /tmp/whatever remote:ServerA
    Server B> rclone sync --interactive /tmp/whatever remote:ServerB

If you sync to the same directory then you should use rclone copy
otherwise the two instances of rclone may delete each other's files,
e.g.

    Server A> rclone copy /tmp/whatever remote:Backup
    Server B> rclone copy /tmp/whatever remote:Backup

The file names you upload from Server A and Server B should be different
in this case, otherwise some file systems (e.g. Drive) may make
duplicates.

Why doesn't rclone support partial transfers / binary diffs like rsync?

Rclone stores each file you transfer as a native object on the remote
cloud storage system. This means that you can see the files you upload
as expected using alternative access methods (e.g. using the Google
Drive web interface). There is a 1:1 mapping between files on your hard
disk and objects created in the cloud storage system.

Cloud storage systems (at least none I've come across yet) don't support
partially uploading an object. You can't take an existing object, and
change some bytes in the middle of it.

It would be possible to make a sync system which stored binary diffs
like rsync does, instead of whole objects, but that would break the 1:1
mapping of files on your hard disk to objects in the remote cloud
storage system.

All the cloud storage systems support partial downloads of content, so
it would be possible to make partial downloads work. However to make
this work efficiently this would require storing a significant amount of
metadata, which breaks the desired 1:1 mapping of files to objects.

Can rclone do bi-directional sync?

Yes, since rclone v1.58.0, bidirectional cloud sync is available.

Can I use rclone with an HTTP proxy?

Yes. rclone will follow the standard environment variables for proxies,
similar to cURL and other programs.

In general the variables are called http_proxy (for services reached
over http) and https_proxy (for services reached over https). Most
public services will be using https, but you may wish to set both.

The content of the variable is protocol://server:port. The protocol
value is the one used to talk to the proxy server, itself, and is
commonly either http or socks5.

Slightly annoyingly, there is no standard for the name; some
applications may use http_proxy but another one HTTP_PROXY. The Go
libraries used by rclone will try both variations, but you may wish to
set all possibilities. So, on Linux, you may end up with code similar to

    export http_proxy=http://proxyserver:12345
    export https_proxy=$http_proxy
    export HTTP_PROXY=$http_proxy
    export HTTPS_PROXY=$http_proxy

Note: If the proxy server requires a username and password, then use

    export http_proxy=http://username:password@proxyserver:12345
    export https_proxy=$http_proxy
    export HTTP_PROXY=$http_proxy
    export HTTPS_PROXY=$http_proxy

The NO_PROXY allows you to disable the proxy for specific hosts. Hosts
must be comma separated, and can contain domains or parts. For instance
"foo.com" also matches "bar.foo.com".

e.g.

    export no_proxy=localhost,127.0.0.0/8,my.host.name
    export NO_PROXY=$no_proxy

Note that the FTP backend does not support ftp_proxy yet.

You can use the command line argument --http-proxy to set the proxy, and
in turn use an override in the config file if you want it set for a
single backend, eg override.http_proxy = http://... in the config file.

The FTP and SFTP backends have their own http_proxy settings to support
an HTTP CONNECT proxy ( --ftp-http-proxy and --sftp-http-proxy )

Rclone gives x509 SSL root certificates error

x509: failed to load system roots and no roots provided means that
rclone can't find the SSL root certificates. Likely you are running
rclone on a NAS with a cut-down Linux OS, or possibly on Solaris.

x509: certificate signed by unknown authority error may occur on
outdated systems, where rclone can't verify the server with the SSL root
certificates.

Rclone (via the Go runtime) tries to load the root certificates from
these places on Linux.

    "/etc/ssl/certs/ca-certificates.crt", // Debian/Ubuntu/Gentoo etc.
    "/etc/pki/tls/certs/ca-bundle.crt",   // Fedora/RHEL
    "/etc/ssl/ca-bundle.pem",             // OpenSUSE
    "/etc/pki/tls/cacert.pem",            // OpenELEC

So doing something like this should fix the problem. It also sets the
time which is important for SSL to work properly.

    mkdir -p /etc/ssl/certs/
    curl -o /etc/ssl/certs/ca-certificates.crt https://raw.githubusercontent.com/bagder/ca-bundle/master/ca-bundle.crt
    ntpclient -s -h pool.ntp.org

The two environment variables SSL_CERT_FILE and SSL_CERT_DIR, mentioned
in the x509 package, provide an additional way to provide the SSL root
certificates on Unix systems other than macOS.

Note that you may need to add the --insecure option to the curl command
line if it doesn't work without.

    curl --insecure -o /etc/ssl/certs/ca-certificates.crt https://raw.githubusercontent.com/bagder/ca-bundle/master/ca-bundle.crt

On macOS, you can install ca-certificates with Homebrew, and specify the
SSL root certificates with the --ca-cert flag.

    brew install ca-certificates
    find $(brew --prefix)/etc/ca-certificates -type f

Rclone gives Failed to load config file: function not implemented error

Likely this means that you are running rclone on Linux version not
supported by the go runtime, ie earlier than version 2.6.23.

See the system requirements section in the go install docs for full
details.

All my uploaded docx/xlsx/pptx files appear as archive/zip

This is caused by uploading these files from a Windows computer which
hasn't got the Microsoft Office suite installed. The easiest way to fix
is to install the Word viewer and the Microsoft Office Compatibility
Pack for Word, Excel, and PowerPoint 2007 and later versions' file
formats

tcp lookup some.domain.com no such host

This happens when rclone cannot resolve a domain. Please check that your
DNS setup is generally working, e.g.

    # both should print a long list of possible IP addresses
    dig www.googleapis.com          # resolve using your default DNS
    dig www.googleapis.com @8.8.8.8 # resolve with Google's DNS server

If you are using systemd-resolved (default on Arch Linux), ensure it is
at version 233 or higher. Previous releases contain a bug which causes
not all domains to be resolved properly.

The Go resolver decision can be influenced with the GODEBUG=netdns=...
environment variable. This also allows to resolve certain issues with
DNS resolution. On Windows or MacOS systems, try forcing use of the
internal Go resolver by setting GODEBUG=netdns=go at runtime. On other
systems (Linux, *BSD, etc) try forcing use of the system name resolver
by setting GODEBUG=netdns=cgo (and recompile rclone from source with CGO
enabled if necessary). See the name resolution section in the go docs.

Failed to start auth webserver on Windows

    Error: config failed to refresh token: failed to start auth webserver: listen tcp 127.0.0.1:53682: bind: An attempt was made to access a socket in a way forbidden by its access permissions.
    ...
    yyyy/mm/dd hh:mm:ss Fatal error: config failed to refresh token: failed to start auth webserver: listen tcp 127.0.0.1:53682: bind: An attempt was made to access a socket in a way forbidden by its access permissions.

This is sometimes caused by the Host Network Service causing issues with
opening the port on the host.

A simple solution may be restarting the Host Network Service with eg.
Powershell

    Restart-Service hns

The total size reported in the stats for a sync is wrong and keeps changing

It is likely you have more than 10,000 files that need to be synced. By
default, rclone only gets 10,000 files ahead in a sync so as not to use
up too much memory. You can change this default with the --max-backlog
flag.

Rclone is using too much memory or appears to have a memory leak

Rclone is written in Go which uses a garbage collector. The default
settings for the garbage collector mean that it runs when the heap size
has doubled.

However it is possible to tune the garbage collector to use less memory
by setting GOGC to a lower value, say export GOGC=20. This will make the
garbage collector work harder, reducing memory size at the expense of
CPU usage.

The most common cause of rclone using lots of memory is a single
directory with millions of files in.

Before rclone v1.70 has to load this entirely into memory as rclone
objects. Each rclone object takes 0.5k-1k of memory. There is a
workaround for this which involves a bit of scripting.

However with rclone v1.70 and later rclone will automatically save
directory entries to disk when a directory with more than --list-cutoff
(1,000,000 by default) entries is detected.

From v1.70 rclone also has the --max-buffer-memory flag which helps
particularly when multi-thread transfers are using too much memory.

Rclone changes fullwidth Unicode punctuation marks in file names

For example: On a Windows system, you have a file with name Test：1.jpg,
where ： is the Unicode fullwidth colon symbol. When using rclone to
copy this to your Google Drive, you will notice that the file gets
renamed to Test:1.jpg, where : is the regular (halfwidth) colon.

The reason for such renames is the way rclone handles different
restricted filenames on different cloud storage systems. It tries to
avoid ambiguous file names as much and allow moving files between many
cloud storage systems transparently, by replacing invalid characters
with similar looking Unicode characters when transferring to one storage
system, and replacing back again when transferring to a different
storage system where the original characters are supported. When the
same Unicode characters are intentionally used in file names, this
replacement strategy leads to unwanted renames. Read more under section
caveats.

Why does rclone fail to connect over TLS but another client works?

If you see TLS handshake failures (or packet captures show the server
rejecting all offered ciphers), the server/proxy may only support legacy
TLS cipher suites (for example RSA key-exchange ciphers such as
RSA_WITH_AES_256_CBC_SHA256, or old 3DES ciphers). Recent Go versions
(which rclone is built with) have removed insecure ciphers from the
default list, so rclone may refuse to negotiate them even if other tools
still do.

If you can't update/reconfigure the server/proxy to support modern TLS
(TLS 1.2/1.3) and ECDHE-based cipher suites you can re-enable legacy
ciphers via GODEBUG:

-   Windows (cmd.exe):

        set GODEBUG=tlsrsakex=1
        rclone copy ...

-   Windows (PowerShell):

        $env:GODEBUG="tlsrsakex=1"
        rclone copy ...

-   Linux/macOS:

        GODEBUG=tlsrsakex=1 rclone copy ...

If the server only supports 3DES, try:

    GODEBUG=tls3des=1 rclone ...

This applies to any rclone feature using TLS (HTTPS, FTPS, WebDAV over
TLS, proxies with TLS interception, etc.). Use these workarounds only
long enough to get the server/proxy updated.

License

This is free software under the terms of the MIT license (check the
COPYING file included with the source code).

    Copyright (C) 2019 by Nick Craig-Wood https://www.craig-wood.com/nick/

    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
    THE SOFTWARE.

Authors and contributors

Authors

-   Nick Craig-Wood nick@craig-wood.com

Contributors

-   Alex Couper amcouper@gmail.com
-   Leonid Shalupov leonid@shalupov.com shalupov@diverse.org.ru
-   Shimon Doodkin helpmepro1@gmail.com
-   Colin Nicholson colin@colinn.com
-   Klaus Post klauspost@gmail.com
-   Sergey Tolmachev tolsi.ru@gmail.com
-   Adriano Aurélio Meirelles adriano@atinge.com
-   C. Bess cbess@users.noreply.github.com
-   Dmitry Burdeev dibu28@gmail.com
-   Joseph Spurrier github@josephspurrier.com
-   Björn Harrtell bjorn@wololo.org
-   Xavier Lucas xavier.lucas@corp.ovh.com
-   Werner Beroux werner@beroux.com
-   Brian Stengaard brian@stengaard.eu
-   Jakub Gedeon jgedeon@sofi.com
-   Jim Tittsler jwt@onjapan.net
-   Michal Witkowski michal@improbable.io
-   Fabian Ruff fabian.ruff@sap.com
-   Leigh Klotz klotz@quixey.com
-   Romain Lapray lapray.romain@gmail.com
-   Justin R. Wilson jrw972@gmail.com
-   Antonio Messina antonio.s.messina@gmail.com
-   Stefan G. Weichinger office@oops.co.at
-   Per Cederberg cederberg@gmail.com
-   Radek Šenfeld rush@logic.cz
-   Fredrik Fornwall fredrik@fornwall.net
-   Asko Tamm asko@deekit.net
-   xor-zz xor@gstocco.com
-   Tomasz Mazur tmazur90@gmail.com
-   Marco Paganini paganini@paganini.net
-   Felix Bünemann buenemann@louis.info
-   Durval Menezes jmrclone@durval.com
-   Luiz Carlos Rumbelsperger Viana maxd13_luiz_carlos@hotmail.com
-   Stefan Breunig stefan-github@yrden.de
-   Alishan Ladhani ali-l@users.noreply.github.com
-   0xJAKE 0xJAKE@users.noreply.github.com
-   Thibault Molleman thibaultmol@users.noreply.github.com
-   Scott McGillivray scott.mcgillivray@gmail.com
-   Bjørn Erik Pedersen bjorn.erik.pedersen@gmail.com
-   Lukas Loesche lukas@mesosphere.io
-   emyarod emyarod@users.noreply.github.com
-   T.C. Ferguson tcf909@gmail.com
-   Brandur brandur@mutelight.org
-   Dario Giovannetti dev@dariogiovannetti.net
-   Károly Oláh okaresz@aol.com
-   Jon Yergatian jon@macfanatic.ca
-   Jack Schmidt github@mowsey.org
-   Dedsec1 Dedsec1@users.noreply.github.com
-   Hisham Zarka hzarka@gmail.com
-   Jérôme Vizcaino jerome.vizcaino@gmail.com
-   Mike Tesch mjt6129@rit.edu
-   Marvin Watson marvwatson@users.noreply.github.com
-   Danny Tsai danny8376@gmail.com
-   Yoni Jah yonjah+git@gmail.com yonjah+github@gmail.com
-   Stephen Harris github@spuddy.org sweharris@users.noreply.github.com
-   Ihor Dvoretskyi ihor.dvoretskyi@gmail.com
-   Jon Craton jncraton@gmail.com
-   Hraban Luyat hraban@0brg.net
-   Michael Ledin mledin89@gmail.com
-   Martin Kristensen me@azgul.com
-   Too Much IO toomuchio@users.noreply.github.com
-   Anisse Astier anisse@astier.eu
-   Zahiar Ahmed zahiar@live.com
-   Igor Kharin igorkharin@gmail.com
-   Bill Zissimopoulos billziss@navimatics.com
-   Bob Potter bobby.potter@gmail.com
-   Steven Lu tacticalazn@gmail.com
-   Sjur Fredriksen sjurtf@ifi.uio.no
-   Ruwbin hubus12345@gmail.com
-   Fabian Möller fabianm88@gmail.com f.moeller@nynex.de
-   Edward Q. Bridges github@eqbridges.com
-   Vasiliy Tolstov v.tolstov@selfip.ru
-   Harshavardhana harsha@minio.io
-   sainaen sainaen@gmail.com
-   gdm85 gdm85@users.noreply.github.com
-   Yaroslav Halchenko debian@onerussian.com
-   John Papandriopoulos jpap@users.noreply.github.com
-   Zhiming Wang zmwangx@gmail.com
-   Andy Pilate cubox@cubox.me
-   Oliver Heyme olihey@googlemail.com olihey@users.noreply.github.com
    de8olihe@lego.com
-   wuyu wuyu@yunify.com
-   Andrei Dragomir adragomi@adobe.com
-   Christian Brüggemann mail@cbruegg.com
-   Alex McGrath Kraak amkdude@gmail.com
-   bpicode bjoern.pirnay@googlemail.com
-   Daniel Jagszent daniel@jagszent.de
-   Josiah White thegenius2009@gmail.com
-   Ishuah Kariuki kariuki@ishuah.com ishuah91@gmail.com
-   Jan Varho jan@varho.org
-   Girish Ramakrishnan girish@cloudron.io
-   LingMan LingMan@users.noreply.github.com
-   Jacob McNamee jacobmcnamee@gmail.com
-   jersou jertux@gmail.com
-   thierry thierry@substantiel.fr
-   Simon Leinen simon.leinen@gmail.com ubuntu@s3-test.novalocal
-   Dan Dascalescu ddascalescu+github@gmail.com
-   Jason Rose jason@jro.io
-   Andrew Starr-Bochicchio a.starr.b@gmail.com
-   John Leach john@johnleach.co.uk
-   Corban Raun craun@instructure.com
-   Pierre Carlson mpcarl@us.ibm.com
-   Ernest Borowski er.borowski@gmail.com
-   Remus Bunduc remus.bunduc@gmail.com
-   Iakov Davydov iakov.davydov@unil.ch dav05.gith@myths.ru
-   Jakub Tasiemski tasiemski@gmail.com
-   David Minor dminor@saymedia.com
-   Tim Cooijmans cooijmans.tim@gmail.com
-   Laurence liuxy6@gmail.com
-   Giovanni Pizzi gio.piz@gmail.com
-   Filip Bartodziej filipbartodziej@gmail.com
-   Jon Fautley jon@dead.li
-   lewapm 32110057+lewapm@users.noreply.github.com
-   Yassine Imounachen yassine256@gmail.com
-   Chris Redekop chris-redekop@users.noreply.github.com
    chris.redekop@gmail.com
-   Jon Fautley jon@adenoid.appstal.co.uk
-   Will Gunn WillGunn@users.noreply.github.com
-   Lucas Bremgartner lucas@bremis.ch
-   Jody Frankowski jody.frankowski@gmail.com
-   Andreas Roussos arouss1980@gmail.com
-   nbuchanan nbuchanan@utah.gov
-   Durval Menezes rclone@durval.com
-   Victor vb-github@viblo.se
-   Mateusz pabian.mateusz@gmail.com
-   Daniel Loader spicypixel@gmail.com
-   David0rk davidork@gmail.com
-   Alexander Neumann alexander@bumpern.de
-   Giri Badanahatti gbadanahatti@us.ibm.com@Giris-MacBook-Pro.local
-   Leo R. Lundgren leo@finalresort.org
-   wolfv wolfv6@users.noreply.github.com
-   Dave Pedu dave@davepedu.com
-   Stefan Lindblom lindblom@spotify.com
-   seuffert oliver@seuffert.biz
-   gbadanahatti 37121690+gbadanahatti@users.noreply.github.com
-   Keith Goldfarb barkofdelight@gmail.com
-   Steve Kriss steve@heptio.com
-   Chih-Hsuan Yen yan12125@gmail.com
-   Alexander Neumann fd0@users.noreply.github.com
-   Matt Holt mholt@users.noreply.github.com
-   Eri Bastos bastos.eri@gmail.com
-   Michael P. Dubner pywebmail@list.ru
-   Antoine GIRARD sapk@users.noreply.github.com
-   Mateusz Piotrowski mpp302@gmail.com
-   Animosity022 animosity22@users.noreply.github.com
    earl.texter@gmail.com
-   Peter Baumgartner pete@lincolnloop.com
-   Craig Rachel craig@craigrachel.com
-   Michael G. Noll miguno@users.noreply.github.com
-   hensur me@hensur.de
-   Oliver Heyme de8olihe@lego.com
-   Richard Yang richard@yenforyang.com
-   Piotr Oleszczyk piotr.oleszczyk@gmail.com
-   Rodrigo rodarima@gmail.com
-   NoLooseEnds NoLooseEnds@users.noreply.github.com
-   Jakub Karlicek jakub@karlicek.me
-   John Clayton john@codemonkeylabs.com
-   Kasper Byrdal Nielsen byrdal76@gmail.com
-   Benjamin Joseph Dag bjdag1234@users.noreply.github.com
-   themylogin themylogin@gmail.com
-   Onno Zweers onno.zweers@surfsara.nl
-   Jasper Lievisse Adriaanse jasper@humppa.nl
-   sandeepkru sandeep.ummadi@gmail.com
    sandeepkru@users.noreply.github.com
-   HerrH atomtigerzoo@users.noreply.github.com
-   Andrew 4030760+sparkyman215@users.noreply.github.com
-   dan smith XX1011@gmail.com
-   Oleg Kovalov iamolegkovalov@gmail.com
-   Ruben Vandamme github-com-00ff86@vandamme.email
-   Cnly minecnly@gmail.com
-   Andres Alvarez 1671935+kir4h@users.noreply.github.com
-   reddi1 xreddi@gmail.com
-   Matt Tucker matthewtckr@gmail.com
-   Sebastian Bünger buengese@gmail.com buengese@protonmail.com
-   Martin Polden mpolden@mpolden.no
-   Alex Chen Cnly@users.noreply.github.com
-   Denis deniskovpen@gmail.com
-   bsteiss 35940619+bsteiss@users.noreply.github.com
-   Cédric Connes cedric.connes@gmail.com
-   Dr. Tobias Quathamer toddy15@users.noreply.github.com
-   dcpu 42736967+dcpu@users.noreply.github.com
-   Sheldon Rupp me@shel.io
-   albertony 12441419+albertony@users.noreply.github.com
-   cron410 cron410@gmail.com
-   Anagh Kumar Baranwal 6824881+darthShadow@users.noreply.github.com
-   Felix Brucker felix@felixbrucker.com
-   Santiago Rodríguez scollazo@users.noreply.github.com
-   Craig Miskell craig.miskell@fluxfederation.com
-   Antoine GIRARD sapk@sapk.fr
-   Joanna Marek joanna.marek@u2i.com
-   frenos frenos@users.noreply.github.com
-   ssaqua ssaqua@users.noreply.github.com
-   xnaas me@xnaas.info
-   Frantisek Fuka fuka@fuxoft.cz
-   Paul Kohout pauljkohout@yahoo.com
-   dcpu 43330287+dcpu@users.noreply.github.com
-   jackyzy823 jackyzy823@gmail.com
-   David Haguenauer ml@kurokatta.org
-   teresy hi.teresy@gmail.com
-   buergi patbuergi@gmx.de
-   Florian Gamboeck mail@floga.de
-   Ralf Hemberger 10364191+rhemberger@users.noreply.github.com
-   Scott Edlund sedlund@users.noreply.github.com
-   Erik Swanson erik@retailnext.net
-   Jake Coggiano jake@stripe.com
-   brused27 brused27@noemailaddress
-   Peter Kaminski kaminski@istori.com
-   Henry Ptasinski henry@logout.com
-   Alexander kharkovalexander@gmail.com
-   Garry McNulty garrmcnu@gmail.com
-   Mathieu Carbou mathieu.carbou@gmail.com
-   Mark Otway mark@otway.com
-   William Cocker 37018962+WilliamCocker@users.noreply.github.com
-   François Leurent 131.js@cloudyks.org
-   Arkadius Stefanski arkste@gmail.com
-   Jay dev@jaygoel.com
-   andrea rota a@xelera.eu
-   nicolov nicolov@users.noreply.github.com
-   Matt Joiner anacrolix@gmail.com
-   Dario Guzik dario@guzik.com.ar
-   qip qip@users.noreply.github.com
-   yair@unicorn yair@unicorn
-   Matt Robinson brimstone@the.narro.ws
-   kayrus kay.diam@gmail.com
-   Rémy Léone remy.leone@gmail.com
-   Wojciech Smigielski wojciech.hieronim.smigielski@gmail.com
-   weetmuts oehrstroem@gmail.com
-   Jonathan vanillajonathan@users.noreply.github.com
-   James Carpenter orbsmiv@users.noreply.github.com
-   Vince vince0villamora@gmail.com
-   Nestar47 47841759+Nestar47@users.noreply.github.com
-   Six brbsix@gmail.com
-   Alexandru Bumbacea alexandru.bumbacea@booking.com
-   calisro robert.calistri@gmail.com
-   Dr.Rx david.rey@nventive.com
-   marcintustin marcintustin@users.noreply.github.com
-   jaKa Močnik jaka@koofr.net
-   Fionera fionera@fionera.de
-   Dan Walters dan@walters.io
-   Danil Semelenov sgtpep@users.noreply.github.com
-   xopez 28950736+xopez@users.noreply.github.com
-   Ben Boeckel mathstuf@gmail.com
-   Manu manu@snapdragon.cc
-   Kyle E. Mitchell kyle@kemitchell.com
-   Gary Kim gary@garykim.dev
-   Jon jonathn@github.com
-   Jeff Quinn jeffrey.quinn@bluevoyant.com
-   Peter Berbec peter@berbec.com
-   didil 1284255+didil@users.noreply.github.com
-   id01 gaviniboom@gmail.com
-   Robert Marko robimarko@gmail.com
-   Philip Harvey 32467456+pharveybattelle@users.noreply.github.com
-   JorisE JorisE@users.noreply.github.com
-   garry415 garry.415@gmail.com
-   forgems forgems@gmail.com
-   Florian Apolloner florian@apolloner.eu
-   Aleksandar Janković office@ajankovic.com
    ajankovic@users.noreply.github.com
-   Maran maran@protonmail.com
-   nguyenhuuluan434 nguyenhuuluan434@gmail.com
-   Laura Hausmann zotan@zotan.pw laura@hausmann.dev
-   yparitcher y@paritcher.com
-   AbelThar abela.tharen@gmail.com
-   Matti Niemenmaa matti.niemenmaa+git@iki.fi
-   Russell Davis russelldavis@users.noreply.github.com
-   Yi FU yi.fu@tink.se
-   Paul Millar paul.millar@desy.de
-   justinalin justinalin@qnap.com
-   EliEron subanimehd@gmail.com
-   justina777 chiahuei.lin@gmail.com
-   Chaitanya Bankanhal bchaitanya15@gmail.com
-   Michał Matczuk michal@scylladb.com
-   Macavirus macavirus@zoho.com
-   Abhinav Sharma abhi18av@outlook.com
-   ginvine 34869051+ginvine@users.noreply.github.com
-   Patrick Wang mail6543210@yahoo.com.tw
-   Cenk Alti cenkalti@gmail.com
-   Andreas Chlupka andy@chlupka.com
-   Alfonso Montero amontero@tinet.org
-   Ivan Andreev ivandeex@gmail.com
-   David Baumgold david@davidbaumgold.com
-   Lars Lehtonen lars.lehtonen@gmail.com
-   Matei David matei.david@gmail.com
-   David david.bramwell@endemolshine.com
-   Anthony Rusdi 33247310+antrusd@users.noreply.github.com
-   Richard Patel me@terorie.dev
-   庄天翼 zty0826@gmail.com
-   SwitchJS dev@switchjs.com
-   Raphael PowershellNinja@users.noreply.github.com
-   Sezal Agrawal sezalagrawal@gmail.com
-   Tyler TylerNakamura@users.noreply.github.com
-   Brett Dutro brett.dutro@gmail.com
-   Vighnesh SK booterror99@gmail.com
-   Arijit Biswas dibbyo456@gmail.com
-   Michele Caci michele.caci@gmail.com
-   AlexandrBoltris ua2fgb@gmail.com
-   Bryce Larson blarson@saltstack.com
-   Carlos Ferreyra crypticmind@gmail.com
-   Saksham Khanna sakshamkhanna@outlook.com
-   dausruddin 5763466+dausruddin@users.noreply.github.com
-   zero-24 zero-24@users.noreply.github.com
-   Xiaoxing Ye ye@xiaoxing.us
-   Barry Muldrey barry@muldrey.net
-   Sebastian Brandt sebastian.brandt@friday.de
-   Marco Molteni marco.molteni@mailbox.org
-   Ankur Gupta 7876747+ankur0493@users.noreply.github.com
-   Maciej Zimnoch maciej@scylladb.com
-   anuar45 serdaliyev.anuar@gmail.com
-   Fernando ferferga@users.noreply.github.com
-   David Cole david.cole@sohonet.com
-   Wei He git@weispot.com
-   Outvi V 19144373+outloudvi@users.noreply.github.com
-   Thomas Kriechbaumer thomas@kriechbaumer.name
-   Tennix tennix@users.noreply.github.com
-   Ole Schütt ole@schuett.name
-   Kuang-che Wu kcwu@csie.org
-   Thomas Eales wingsuit@users.noreply.github.com
-   Paul Tinsley paul.tinsley@vitalsource.com
-   Felix Hungenberg git@shiftgeist.com
-   Benjamin Richter github@dev.telepath.de
-   landall cst_zf@qq.com
-   thestigma thestigma@gmail.com
-   jtagcat 38327267+jtagcat@users.noreply.github.com
-   Damon Permezel permezel@me.com
-   boosh boosh@users.noreply.github.com
-   unbelauscht 58393353+unbelauscht@users.noreply.github.com
-   Motonori IWAMURO vmi@nifty.com
-   Benjapol Worakan benwrk@live.com
-   Dave Koston dave.koston@stackpath.com
-   Durval Menezes DurvalMenezes@users.noreply.github.com
-   Tim Gallant me@timgallant.us
-   Frederick Zhang frederick888@tsundere.moe
-   valery1707 valery1707@gmail.com
-   Yves G theYinYeti@yalis.fr
-   Shing Kit Chan chanshingkit@gmail.com
-   Franklyn Tackitt franklyn@tackitt.net
-   Robert-André Mauchin zebob.m@gmail.com
-   evileye 48332831+ibiruai@users.noreply.github.com
-   Joachim Brandon LeBlanc brandon@leblanc.codes
-   Patryk Jakuszew patryk.jakuszew@gmail.com
-   fishbullet shindu666@gmail.com
-   greatroar <@>
-   Bernd Schoolmann mail@quexten.com
-   Elan Ruusamäe glen@pld-linux.org
-   Max Sum max@lolyculture.com
-   Mark Spieth mspieth@users.noreply.github.com
-   harry me@harry.plus
-   Samantha McVey samantham@posteo.net
-   Jack Anderson jack.anderson@metaswitch.com
-   Michael G draget@speciesm.net
-   Brandon Philips brandon@ifup.org
-   Daven dooven@users.noreply.github.com
-   Martin Stone martin@d7415.co.uk
-   David Bramwell 13053834+dbramwell@users.noreply.github.com
-   Sunil Patra snl_su@live.com
-   Adam Stroud adam.stroud@gmail.com
-   Kush kushsharma@users.noreply.github.com
-   Matan Rosenberg matan129@gmail.com
-   gitch1 63495046+gitch1@users.noreply.github.com
-   ElonH elonhhuang@gmail.com
-   Fred fred@creativeprojects.tech
-   Sébastien Gross renard@users.noreply.github.com
-   Maxime Suret 11944422+msuret@users.noreply.github.com
-   Caleb Case caleb@storj.io calebcase@gmail.com
-   Ben Zenker imbenzenker@gmail.com
-   Martin Michlmayr tbm@cyrius.com
-   Brandon McNama bmcnama@pagerduty.com
-   Daniel Slyman github@skylayer.eu
-   Alex Guerrero guerrero@users.noreply.github.com
-   Matteo Pietro Dazzi matteopietro.dazzi@gft.com
-   edwardxml 56691903+edwardxml@users.noreply.github.com
-   Roman Kredentser shareed2k@gmail.com
-   Kamil Trzciński ayufan@ayufan.eu
-   Zac Rubin z-0@users.noreply.github.com
-   Vincent Feltz
-   Heiko Bornholdt bornholdt@informatik.uni-hamburg.de
-   Matteo Pietro Dazzi matteopietro.dazzi@gmail.com
-   jtagcat gitlab@c7.ee
-   Petri Salminen petri@salminen.dev
-   Tim Burke tim.burke@gmail.com
-   Kai Lüke kai@kinvolk.io
-   Garrett Squire github@garrettsquire.com
-   Evan Harris eharris@puremagic.com
-   Kevin keyam@microsoft.com
-   Morten Linderud morten@linderud.pw
-   Dmitry Ustalov dmitry.ustalov@gmail.com
-   Jack 196648+jdeng@users.noreply.github.com
-   kcris cristian.tarsoaga@gmail.com
-   tyhuber1 68970760+tyhuber1@users.noreply.github.com
-   David Ibarra david.ibarra@realty.com
-   Tim Gallant tim@lilt.com
-   Kaloyan Raev kaloyan@storj.io
-   Jay McEntire jay.mcentire@gmail.com
-   Leo Luan leoluan@us.ibm.com
-   aus 549081+aus@users.noreply.github.com
-   Aaron Gokaslan agokaslan@fb.com
-   Egor Margineanu egmar@users.noreply.github.com
-   Lucas Kanashiro lucas.kanashiro@canonical.com
-   WarpedPixel WarpedPixel@users.noreply.github.com
-   Sam Edwards sam@samedwards.ca
-   wjielai gouki0123@gmail.com
-   Muffin King jinxz_k@live.com
-   Christopher Stewart 6573710+1f47a@users.noreply.github.com
-   Russell Cattelan cattelan@digitalelves.com
-   gyutw 30371241+gyutw@users.noreply.github.com
-   Hekmon edouardhur@gmail.com
-   LaSombra lasombra@users.noreply.github.com
-   Dov Murik dov.murik@gmail.com
-   Ameer Dawood ameer1234567890@gmail.com
-   Dan Hipschman dan.hipschman@opendoor.com
-   Josh Soref jsoref@users.noreply.github.com
    2119212+jsoref@users.noreply.github.com
-   David david@staron.nl
-   Ingo ingo@hoffmann.cx
-   Adam Plánský adamplansky@users.noreply.github.com
    adamplansky@gmail.com
-   Manish Gupta manishgupta.ait@gmail.com
-   Deepak Sah sah.sslpu@gmail.com
-   Marcin Zelent marcin@zelent.net
-   zhucan zhucan.k8s@gmail.com
-   James Lim james.lim@samsara.com
-   Laurens Janssen BD69BM@insim.biz
-   Bob Bagwill bobbagwill@gmail.com
-   Nathan Collins colli372@msu.edu
-   lostheli
-   kelv kelvin@acks.org
-   Milly milly.ca@gmail.com
-   gtorelly gtorelly@gmail.com
-   Brad Ackerman brad@facefault.org
-   Mitsuo Heijo mitsuo.heijo@gmail.com
-   Claudio Bantaloukas rockdreamer@gmail.com
-   Benjamin Gustin gustin.ben@gmail.com
-   Ingo Weiss ingo@redhat.com
-   Kerry Su me@sshockwave.net
-   Ilyess Bachiri ilyess.bachiri@sonder.com
-   Yury Stankevich urykhy@gmail.com
-   kice wslikerqs@gmail.com
-   Denis Neuling denisneuling@gmail.com
-   Janne Johansson icepic.dz@gmail.com
-   Patrik Nordlén patriki@gmail.com
-   CokeMine aptx4561@gmail.com
-   Sơn Trần-Nguyễn github@sntran.com
-   lluuaapp 266615+lluuaapp@users.noreply.github.com
-   Zach Kipp kipp.zach@gmail.com
-   Riccardo Iaconelli riccardo@kde.org
-   Sakuragawa Misty gyc990326@gmail.com
-   Nicolas Rueff nicolas@rueff.fr
-   Pau Rodriguez-Estivill prodrigestivill@gmail.com
-   Bob Pusateri BobPusateri@users.noreply.github.com
-   Alex JOST 25005220+dimejo@users.noreply.github.com
-   Alexey Tabakman samosad.ru@gmail.com
-   David Sze sze.david@gmail.com
-   cynthia kwok cynthia.m.kwok@gmail.com
-   Miron Veryanskiy MironVeryanskiy@gmail.com
-   K265 k.265@qq.com
-   Vesnyx Vesnyx@users.noreply.github.com
-   Dmitry Chepurovskiy me@dm3ch.net
-   Rauno Ots rauno.ots@cgi.com
-   Georg Neugschwandtner georg.neugschwandtner@gmx.net
-   pvalls polvallsrue@gmail.com
-   Robert Thomas 31854736+wolveix@users.noreply.github.com
-   Romeo Kienzler romeo.kienzler@gmail.com
-   tYYGH tYYGH@users.noreply.github.com
-   georne 77802995+georne@users.noreply.github.com
-   Maxwell Calman mcalman@MacBook-Pro.local
-   Naveen Honest Raj naveendurai19@gmail.com
-   Lucas Messenger lmesseng@cisco.com
-   Manish Kumar krmanish260@gmail.com
-   x0b x0bdev@gmail.com
-   CERN through the CS3MESH4EOSC Project
-   Nick Gaya nicholasgaya+github@gmail.com
-   Ashok Gelal 401055+ashokgelal@users.noreply.github.com
-   Dominik Mydlil dominik.mydlil@outlook.com
-   Nazar Mishturak nazarmx@gmail.com
-   Ansh Mittal iamAnshMittal@gmail.com
-   noabody noabody@yahoo.com
-   OleFrost 82263101+olefrost@users.noreply.github.com
-   Kenny Parsons kennyparsons93@gmail.com
-   Jeffrey Tolar tolar.jeffrey@gmail.com
-   jtagcat git-514635f7@jtag.cat
-   Tatsuya Noyori
    63089076+public-tatsuya-noyori@users.noreply.github.com
-   lewisxy lewisxy@users.noreply.github.com
-   Nolan Woods nolan_w@sfu.ca
-   Gautam Kumar 25435568+gautamajay52@users.noreply.github.com
-   Chris Macklin chris.macklin@10xgenomics.com
-   Antoon Prins antoon.prins@surfsara.nl
-   Alexey Ivanov rbtz@dropbox.com
-   Serge Pouliquen sp31415@free.fr
-   acsfer carlos@reendex.com
-   Tom tom@tom-fitzhenry.me.uk
-   Tyson Moore tyson@tyson.me
-   database64128 free122448@hotmail.com
-   Chris Lu chrislusf@users.noreply.github.com
-   Reid Buzby reid@rethink.software
-   darrenrhs darrenrhs@gmail.com
-   Florian Penzkofer fp@nullptr.de
-   Xuanchen Wu 117010292@link.cuhk.edu.cn
-   partev petrosyan@gmail.com
-   Dmitry Sitnikov fo2@inbox.ru
-   Haochen Tong i@hexchain.org
-   Michael Hanselmann public@hansmi.ch
-   Chuan Zh zhchuan7@gmail.com
-   Antoine GIRARD antoine.girard@sapk.fr
-   Justin Winokur (Jwink3101) Jwink3101@users.noreply.github.com
-   Mariano Absatz (git) scm@baby.com.ar
-   Greg Sadetsky lepetitg@gmail.com
-   yedamo logindaveye@gmail.com
-   hota lindwurm.q@gmail.com
-   vinibali vinibali1@gmail.com
-   Ken Enrique Morel ken.morel.santana@gmail.com
-   Justin Hellings justin.hellings@gmail.com
-   Parth Shukla pparth@pparth.net
-   wzl wangzl31@outlook.com
-   HNGamingUK connor@earnshawhome.co.uk
-   Jonta 359397+Jonta@users.noreply.github.com
-   YenForYang YenForYang@users.noreply.github.com
-   SimJoSt / Joda Stößer git@simjo.st
-   Logeshwaran waranlogesh@gmail.com
-   Rajat Goel rajat@dropbox.com
-   r0kk3rz r0kk3rz@gmail.com
-   Matthew Sevey mjsevey@gmail.com
-   Filip Rysavy fil@siasky.net
-   Ian Levesque ian@ianlevesque.org
-   Thomas Stachl thomas@stachl.me
-   Dmitry Bogatov git#v1@kaction.cc
-   thomae 4493560+thomae@users.noreply.github.com
-   trevyn trevyn-git@protonmail.com
-   David Liu david.yx.liu@oracle.com
-   Chris Nelson stuff@cjnaz.com
-   Felix Bünemann felix.buenemann@gmail.com
-   Atílio Antônio atiliodadalto@hotmail.com
-   Carlo Mion mion00@gmail.com
-   Chris Lu chris.lu@gmail.com
-   Vitor Arruda vitor.pimenta.arruda@gmail.com
-   bbabich bbabich@datamossa.com
-   David dp.davide.palma@gmail.com
-   Borna Butkovic borna@favicode.net
-   Fredric Arklid fredric.arklid@consid.se
-   Andy Jackson Andrew.Jackson@bl.uk
-   Sinan Tan i@tinytangent.com
-   deinferno 14363193+deinferno@users.noreply.github.com
-   rsapkf rsapkfff@pm.me
-   Will Holtz wholtz@gmail.com
-   GGG KILLER gggkiller2@gmail.com
-   Logeshwaran Murugesan logeshwaran@testpress.in
-   Lu Wang coolwanglu@gmail.com
-   Bumsu Hyeon ksitht@gmail.com
-   Shmz Ozggrn 98463324+ShmzOzggrn@users.noreply.github.com
-   Kim kim@jotta.no
-   Niels van de Weem n.van.de.weem@smile.nl
-   Koopa codingkoopa@gmail.com
-   Yunhai Luo yunhai-luo@hotmail.com
-   Charlie Jiang w@chariri.moe
-   Alain Nussbaumer alain.nussbaumer@alleluia.ch
-   Vanessasaurus 814322+vsoch@users.noreply.github.com
-   Isaac Levy isaac.r.levy@gmail.com
-   Gourav T workflowautomation@protonmail.com
-   Paulo Martins paulo.pontes.m@gmail.com
-   viveknathani viveknathani2402@gmail.com
-   Eng Zer Jun engzerjun@gmail.com
-   Abhiraj abhiraj.official15@gmail.com
-   Márton Elek elek@apache.org elek@users.noreply.github.com
-   Vincent Murphy vdm@vdm.ie
-   ctrl-q 34975747+ctrl-q@users.noreply.github.com
-   Nil Alexandrov nalexand@akamai.com
-   GuoXingbin 101376330+guoxingbin@users.noreply.github.com
-   Berkan Teber berkan@berkanteber.com
-   Tobias Klauser tklauser@distanz.ch
-   KARBOWSKI Piotr piotr.karbowski@gmail.com
-   GH geeklihui@foxmail.com
-   rafma0 int.main@gmail.com
-   Adrien Rey-Jarthon jobs@adrienjarthon.com
-   Nick Gooding 73336146+nickgooding@users.noreply.github.com
-   Leroy van Logchem lr.vanlogchem@gmail.com
-   Zsolt Ero zsolt.ero@gmail.com
-   Lesmiscore nao20010128@gmail.com
-   ehsantdy ehsan.tadayon@arvancloud.com ehsantadayon85@gmail.com
-   SwazRGB 65694696+swazrgb@users.noreply.github.com
-   Mateusz Puczyński mati6095@gmail.com
-   Michael C Tiernan - MIT-Research Computing Project mtiernan@mit.edu
-   Kaspian 34658474+KaspianDev@users.noreply.github.com
-   Werner EvilOlaf@users.noreply.github.com
-   Hugal31 hugo.laloge@gmail.com
-   Christian Galo 36752715+cgalo5758@users.noreply.github.com
-   Erik van Velzen erik@evanv.nl
-   Derek Battams derek@battams.ca
-   Paul devnoname120@gmail.com
-   SimonLiu simonliu009@users.noreply.github.com
-   Hugo Laloge hla@lescompanions.com
-   Mr-Kanister 68117355+Mr-Kanister@users.noreply.github.com
-   Rob Pickerill r.pickerill@gmail.com
-   Andrey to.merge@gmail.com
-   Eric Wolf 19wolf@gmail.com
-   Nick nick.naumann@mailbox.tu-dresden.de
-   Jason Zheng jszheng17@gmail.com
-   Matthew Vernon mvernon@wikimedia.org
-   Noah Hsu i@nn.ci
-   m00594701 mengpengbo@huawei.com
-   Art M. Gallagher artmg50@gmail.com
-   Sven Gerber 49589423+svengerber@users.noreply.github.com
-   CrossR r.cross@lancaster.ac.uk
-   Maciej Radzikowski maciej@radzikowski.com.pl
-   Scott Grimes scott.grimes@spaciq.com
-   Phil Shackleton 71221528+philshacks@users.noreply.github.com
-   eNV25 env252525@gmail.com
-   Caleb inventor96@users.noreply.github.com
-   J-P Treen jp@wraptious.com
-   Martin Czygan 53705+miku@users.noreply.github.com
-   buda sandrojijavadze@protonmail.com
-   mirekphd 36706320+mirekphd@users.noreply.github.com
-   vyloy vyloy@qq.com
-   Anthrazz 25553648+Anthrazz@users.noreply.github.com
-   zzr93 34027824+zzr93@users.noreply.github.com
-   Paul Norman penorman@mac.com
-   Lorenzo Maiorfi maiorfi@gmail.com
-   Claudio Maradonna penguyman@stronzi.org
-   Ovidiu Victor Tatar ovi.tatar@googlemail.com
-   Evan Spensley epspensley@gmail.com
-   Yen Hu 61753151+0x59656e@users.noreply.github.com
-   Steve Kowalik steven@wedontsleep.org
-   Jordi Gonzalez Muñoz jordigonzm@gmail.com
-   Joram Schrijver i@joram.io
-   Mark Trolley marktrolley@gmail.com
-   João Henrique Franco joaohenrique.franco@gmail.com
-   anonion aman207@users.noreply.github.com
-   Ryan Morey 4590343+rmorey@users.noreply.github.com
-   Simon Bos simonbos9@gmail.com
-   YFdyh000 yfdyh000@gmail.com
-   Øyvind Heddeland Instefjord instefjord@outlook.com
-   Dmitry Deniskin 110819396+ddeniskin@users.noreply.github.com
-   Alexander Knorr 106825+opexxx@users.noreply.github.com
-   Richard Bateman richard@batemansr.us
-   Dimitri Papadopoulos Orfanos
    3234522+DimitriPapadopoulos@users.noreply.github.com
-   Lorenzo Milesi lorenzo.milesi@yetopen.com
-   Isaac Aymerich isaac.aymerich@gmail.com
-   YanceyChiew 35898533+YanceyChiew@users.noreply.github.com
-   Manoj Ghosh msays2000@gmail.com
-   Bachue Zhou bachue.shu@gmail.com
-   Manoj Ghosh manoj.ghosh@oracle.com
-   Tom Mombourquette tom@devnode.com
-   Robert Newson rnewson@apache.org
-   Samuel Johnson esamueljohnson@gmail.com
-   coultonluke luke@luke.org.uk
-   Anthony Pessy anthony@cogniteev.com
-   Philip Harvey pharvey@battelleecology.org
-   dgouju dgouju@users.noreply.github.com
-   Clément Notin clement.notin@gmail.com
-   x3-apptech 66947598+x3-apptech@users.noreply.github.com
-   Arnie97 arnie97@gmail.com
-   Roel Arents 2691308+roelarents@users.noreply.github.com
-   Aaron Gokaslan aaronGokaslan@gmail.com
-   techknowlogick matti@mdranta.net
-   rkettelerij richard@mindloops.nl
-   Kamui fin-kamui@pm.me
-   asdffdsazqqq 90116442+asdffdsazqqq@users.noreply.github.com
-   Nathaniel Wesley Filardo nfilardo@microsoft.com
-   ycdtosa ycdtosa@users.noreply.github.com
-   Erik Agterdenbos agterdenbos@users.noreply.github.com
-   Kevin Verstaen 48050031+kverstae@users.noreply.github.com
-   MohammadReza mrvashian@gmail.com
-   vanplus 60313789+vanplus@users.noreply.github.com
-   Jack 16779171+jkpe@users.noreply.github.com
-   Abdullah Saglam abdullah.saglam@stonebranch.com
-   Marks Polakovs github@markspolakovs.me
-   piyushgarg piyushgarg80@gmail.com
-   Kaloyan Raev kaloyan-raev@users.noreply.github.com
-   IMTheNachoMan imthenachoman@gmail.com
-   alankrit alankrit@google.com
-   Bryan Kaplan <#@bryankaplan.com>
-   LXY 767763591@qq.com
-   Simmon Li (he/him) li.simmon@gmail.com
-   happyxhw 44490504+happyxhw@users.noreply.github.com
-   Simmon Li (he/him) hello@crespire.dev
-   Matthias Baur baurmatt@users.noreply.github.com
-   Hunter Wittenborn hunter@hunterwittenborn.com
-   logopk peter@kreuser.name
-   Gerard Bosch 30733556+gerardbosch@users.noreply.github.com
-   ToBeFree github@tfrei.de
-   NodudeWasTaken 75137537+NodudeWasTaken@users.noreply.github.com
-   Peter Brunner peter@lugoues.net
-   Ninh Pham dongian.rapclubkhtn@gmail.com
-   Ryan Caezar Itang sitiom@proton.me
-   Peter Brunner peter@psykhe.com
-   Leandro Sacchet leandro.sacchet@animati.com.br
-   dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-   cycneuramus 56681631+cycneuramus@users.noreply.github.com
-   Arnavion me@arnavion.dev
-   Christopher Merry christopher.merry@mlb.com
-   Thibault Coupin thibault.coupin@gmail.com
-   Richard Tweed RichardoC@users.noreply.github.com
-   Zach Kipp Zacho2@users.noreply.github.com
-   yuudi 26199752+yuudi@users.noreply.github.com
-   NickIAm NickIAm@users.noreply.github.com
-   Juang, Yi-Lin frankyjuang@gmail.com
-   jumbi77 jumbi77@users.noreply.github.com
-   Aditya Basu ab.aditya.basu@gmail.com
-   ed s@ocv.me
-   Drew Parsons dparsons@emerall.com
-   Joel joelnb@users.noreply.github.com
-   wiserain mail275@gmail.com
-   Roel Arents roel.arents@kadaster.nl
-   Shyim github@shyim.de
-   Rintze Zelle 78232505+rzelle-lallemand@users.noreply.github.com
-   Damo damoclark@users.noreply.github.com
-   WeidiDeng weidi_deng@icloud.com
-   Brian Starkey stark3y@gmail.com
-   jladbrook jhladbrook@gmail.com
-   Loren Gordon lorengordon@users.noreply.github.com
-   dlitster davidlitster@gmail.com
-   Tobias Gion tobias@gion.io
-   Jānis Bebrītis janis.bebritis@wunder.io
-   Adam K github.com@ak.tidy.email
-   Andrei Smirnov smirnov.captain@gmail.com
-   Janne Hellsten jjhellst@gmail.com
-   cc 12904584+shvc@users.noreply.github.com
-   Tareq Sharafy tareq.sha@gmail.com
-   kapitainsky dariuszb@me.com
-   douchen playgoobug@gmail.com
-   Sam Lai 70988+slai@users.noreply.github.com
-   URenko 18209292+URenko@users.noreply.github.com
-   Stanislav Gromov kullfar@gmail.com
-   Paulo Schreiner paulo.schreiner@delivion.de
-   Mariusz Suchodolski mariusz@suchodol.ski
-   danielkrajnik dan94kra@gmail.com
-   Peter Fern github@0xc0dedbad.com
-   zzq i@zhangzqs.cn
-   mac-15 usman.ilamdin@phpstudios.com
-   Sawada Tsunayoshi 34431649+TsunayoshiSawada@users.noreply.github.com
-   Dean Attali daattali@gmail.com
-   Fjodor42 molgaard@gmail.com
-   BakaWang wa11579@hotmail.com
-   Mahad 56235065+Mahad-lab@users.noreply.github.com
-   Vladislav Vorobev x.miere@gmail.com
-   darix darix@users.noreply.github.com
-   Benjamin 36415086+bbenjamin-sys@users.noreply.github.com
-   Chun-Hung Tseng henrybear327@users.noreply.github.com
-   Ricardo D'O. Albanus rdalbanus@users.noreply.github.com
-   gabriel-suela gscsuela@gmail.com
-   Tiago Boeing contato@tiagoboeing.com
-   Edwin Mackenzie-Owen edwin.mowen@gmail.com
-   Niklas Hambüchen mail@nh2.me
-   yuudi yuudi@users.noreply.github.com
-   Zach github@prozach.org
-   nielash 31582349+nielash@users.noreply.github.com
-   Julian Lepinski lepinsk@users.noreply.github.com
-   Raymond Berger RayBB@users.noreply.github.com
-   Nihaal Sangha nihaal.git@gmail.com
-   Masamune3210 1053504+Masamune3210@users.noreply.github.com
-   James Braza jamesbraza@gmail.com
-   antoinetran antoinetran@users.noreply.github.com
-   alexia me@alexia.lol
-   nielash nielronash@gmail.com
-   Vitor Gomes vitor.gomes@delivion.de mail@vitorgomes.com
-   Jacob Hands jacob@gogit.io
-   hideo aoyama 100831251+boukendesho@users.noreply.github.com
-   Roberto Ricci io@r-ricci.it
-   Bjørn Smith bjornsmith@gmail.com
-   Alishan Ladhani 8869764+aladh@users.noreply.github.com
-   zjx20 zhoujianxiong2@gmail.com
-   Oksana 142890647+oks-maytech@users.noreply.github.com
-   Volodymyr Kit v.kit@maytech.net
-   David Pedersen limero@me.com
-   Drew Stinnett drew@drewlink.com
-   Pat Patterson pat@backblaze.com
-   Herby Gillot herby.gillot@gmail.com
-   Nikita Shoshin shoshin_nikita@fastmail.com
-   rinsuki 428rinsuki+git@gmail.com
-   Beyond Meat 51850644+beyondmeat@users.noreply.github.com
-   Saleh Dindar salh@fb.com
-   Volodymyr 142890760+vkit-maytech@users.noreply.github.com
-   Gabriel Espinoza 31670639+gspinoza@users.noreply.github.com
-   Keigo Imai keigo.imai@gmail.com
-   Ivan Yanitra iyanitra@tesla-consulting.com
-   alfish2000 alfish2000@gmail.com
-   wuxingzhong qq330332812@gmail.com
-   Adithya Kumar akumar42@protonmail.com
-   Tayo-pasedaRJ 138471223+Tayo-pasedaRJ@users.noreply.github.com
-   Peter Kreuser logo@kreuser.name
-   fotile96 fotile96@users.noreply.github.com
-   Luc Ritchie luc.ritchie@gmail.com
-   cynful cynful@users.noreply.github.com
-   wjielai wjielai@tencent.com
-   Jack Deng jackdeng@gmail.com
-   Mikubill 31246794+Mikubill@users.noreply.github.com
-   Artur Neumann artur@jankaritech.com
-   Saw-jan saw.jan.grg3e@gmail.com
-   Oksana Zhykina o.zhykina@maytech.net
-   karan karan.gupta92@gmail.com
-   viktor viktor@yakovchuk.net
-   moongdal moongdal@tutanota.com
-   Mina Galić freebsd@igalic.co
-   Alen Šiljak dev@alensiljak.eu.org
-   你知道未来吗 rkonfj@gmail.com
-   Abhinav Dhiman 8640877+ahnv@users.noreply.github.com
-   halms 7513146+halms@users.noreply.github.com
-   ben-ba benjamin.brauner@gmx.de
-   Eli Orzitzer e_orz@yahoo.com
-   Anthony Metzidis anthony.metzidis@gmail.com
-   keongalvin keongalvin@gmail.com
-   rarspace01 rarspace01@users.noreply.github.com
-   Paul Stern paulstern45@gmail.com
-   Nikhil Ahuja nikhilahuja@live.com
-   Harshit Budhraja 52413945+harshit-budhraja@users.noreply.github.com
-   Tera 24725862+teraa@users.noreply.github.com
-   Kyle Reynolds kylereynoldsdev@gmail.com
-   Michael Eischer michael.eischer@gmx.de
-   Thomas Müller 1005065+DeepDiver1975@users.noreply.github.com
-   DanielEgbers 27849724+DanielEgbers@users.noreply.github.com
-   Jack Provance 49460795+njprov@users.noreply.github.com
-   Gabriel Ramos 109390599+gabrielramos02@users.noreply.github.com
-   Dan McArdle d@nmcardle.com
-   Joe Cai joe.cai@bigcommerce.com
-   Anders Swanson anders.swanson@oracle.com
-   huajin tong 137764712+thirdkeyword@users.noreply.github.com
-   John-Paul Smith john-paulsmith@users.noreply.github.com
-   racerole 148756161+racerole@users.noreply.github.com
-   Gachoud Philippe ph.gachoud@gmail.com
-   YukiUnHappy saberhana@yandex.com
-   Kyle Reynolds kyle.reynolds@bridgerphotonics.com
-   Lewis Hook lewis@hook.im
-   hoyho luohaihao@gmail.com
-   Vitaly 9034218+gvitali@users.noreply.github.com
-   iotmaestro iotmaestro@proton.me
-   psychopatt 66741203+psychopatt@users.noreply.github.com
-   Alex Garel alex@garel.org
-   Warrentheo warrentheo@hotmail.com
-   Alexandre Lavigne lavigne958@gmail.com
-   yoelvini 134453420+yoelvini@users.noreply.github.com
-   Erisa A erisa@cloudflare.com
-   Pieter van Oostrum pieter@vanoostrum.org
-   jakzoe 155812065+jakzoe@users.noreply.github.com
-   guangwu guoguangwu@magic-shield.com
-   static-moonlight 107991124+static-moonlight@users.noreply.github.com
-   yudrywet yudeyao@yeah.net
-   Butanediol git@xnh.app
-   Dave Nicolson david.nicolson@gmail.com
-   Katia Esposito katia@linux.com
-   pawsey-kbuckley 36438302+pawsey-kbuckley@users.noreply.github.com
-   hidewrong 167099254+hidewrong@users.noreply.github.com
-   Michael Terry mike@mterry.name
-   Sunny 25066078+LoSunny@users.noreply.github.com
-   overallteach cricis@foxmail.com
-   JT Olio jt@olio.lol
-   Evan McBeth 64177332+AtomicRobotMan0101@users.noreply.github.com
-   Dominik Joe Pantůček dominik.pantucek@trustica.cz
-   yumeiyin 155420652+yumeiyin@users.noreply.github.com
-   Bruno Fernandes 54373093+folkzb@users.noreply.github.com
-   Thomas Schneider tspam.github@brainfuck.space
-   Charles Hamilton 52973156+chamilton-ccn@users.noreply.github.com
-   Tomasz Melcer tomasz@melcer.pl
-   Michał Dzienisiewicz michal.piotr.dz@gmail.com
-   Florian Klink flokli@flokli.de
-   Bill Fraser bill@wfraser.dev
-   Thearas thearas850@gmail.com
-   Filipe Herculano fifo_@live.com
-   Russ Bubley russ.bubley@googlemail.com
-   Paul Collins paul.collins@canonical.com
-   Tomasz Melcer liori@exroot.org
-   itsHenry 2671230065@qq.com
-   Ke Wang me@ke.wang
-   AThePeanut4 49614525+AThePeanut4@users.noreply.github.com
-   Tobias Markus tobbi.bugs@googlemail.com
-   Ernie Hershey github@ernie.org
-   Will Miles wmiles@sgl.com
-   David Seifert 16636962+SoapGentoo@users.noreply.github.com
-   Fornax wimbrand96@gmail.com
-   Sam Harrison sam.harrison@files.com
-   Péter Bozsó 3806723+peterbozso@users.noreply.github.com
-   Georg Welzel gwelzel@mailbox.org
-   John Oxley john.oxley@gmail.com joxley@meta.com
-   Pawel Palucha pawel.palucha@aetion.com
-   crystalstall crystalruby@qq.com
-   nipil nipil@users.noreply.github.com
-   yuval-cloudinary 46710068+yuval-cloudinary@users.noreply.github.com
-   Mathieu Moreau mrx23dot@users.noreply.github.com
-   fsantagostinobietti
    6057026+fsantagostinobietti@users.noreply.github.com
-   Oleg Kunitsyn 114359669+hiddenmarten@users.noreply.github.com
-   Divyam 47589864+divyam234@users.noreply.github.com
-   ttionya ttionya@users.noreply.github.com
-   quiescens quiescens@gmail.com
-   rishi.sridhar rishi.sridhar@zohocorp.com
-   Lawrence Murray lawrence@indii.org
-   Leandro Piccilli leandro.piccilli@thalesgroup.com
-   Benjamin Legrand benjamin.legrand@seagate.com
-   Noam Ross noam.ross@gmail.com
-   lostb1t coding-mosses0z@icloud.com
-   Matthias Gatto matthias.gatto@outscale.com
-   André Tran andre.tran@outscale.com
-   Simon Bos simon@simonbos.be
-   Alexandre Hamez 199517+ahamez@users.noreply.github.com
-   Randy Bush randy@psg.com
-   Diego Monti diegmonti@users.noreply.github.com
-   tgfisher tgfisher@stanford.edu
-   Moises Lima mozlima@gmail.com
-   Dimitar Ivanov mimiteto@gmail.com
-   shenpengfeng xinhangzhou@icloud.com
-   Dimitrios Slamaris dim0x69@users.noreply.github.com
-   vintagefuture 39503528+vintagefuture@users.noreply.github.com
-   David Seifert soap@gentoo.org
-   Michael R. Davis mrdvt92@users.noreply.github.com
-   remygrandin remy.gr@ndin.fr
-   Ilias Ozgur Can Leonard iscilyas@gmail.com
-   divinity76 divinity76@gmail.com
-   Martin Hassack martin@redmaple.tech
-   Filipe Azevedo pasnox@gmail.com
-   hayden.pan hayden.pan@outlook.com
-   Yxxx 45665172+marsjane@users.noreply.github.com
-   Thomas ten Cate ttencate@gmail.com
-   Louis Laureys louis@laureys.me
-   Henry Lee contact@nynxz.com
-   ToM thomas.faucher@bibliosansfrontieres.org
-   TAKEI Yuya 853320+takei-yuya@users.noreply.github.com
-   Francesco Frassinelli fraph24@gmail.com
    francesco.frassinelli@nina.no
-   Matt Ickstadt mattico8@gmail.com matt@beckenterprises.com
-   Spencer McCullough mccullough.spencer@gmail.com
-   Jonathan Giannuzzi jonathan@giannuzzi.me
-   Christoph Berger github@christophberger.com
-   Tim White tim.white@su.org.au
-   Robin Schneider robin.schneider@stackit.cloud
-   izouxv izouxv@users.noreply.github.com
-   Moises Lima mozlima@users.noreply.github.com
-   Bruno Fernandes bruno.fernandes1996@hotmail.com
-   Corentin Barreau corentin@archive.org
-   hiddenmarten hiddenmarten@gmail.com
-   Trevor Starick trevor.starick@gmail.com
-   b-wimmer 132347192+b-wimmer@users.noreply.github.com
-   Jess jess@jessie.cafe
-   Zachary Vorhies zachvorhies@protonmail.com
-   Alexander Minbaev minbaev@gmail.com
-   Joel K Biju joelkbiju18@gmail.com
-   ll3006 doublel3006@gmail.com
-   jbagwell-akamai 113531113+jbagwell-akamai@users.noreply.github.com
-   Michael Kebe michael.kebe@gmail.com
-   Lorenz Brun lorenz@brun.one
-   Dave Vasilevsky djvasi@gmail.com dave@vasilevsky.ca
-   luzpaz luzpaz@users.noreply.github.com
-   jack 9480542+jackusm@users.noreply.github.com
-   Jörn Friedrich Dreyer jfd@butonic.de
-   alingse alingse@foxmail.com
-   Fernando Fernández ferferga@hotmail.com
-   eccoisle 167755281+eccoisle@users.noreply.github.com
-   Klaas Freitag kraft@freisturz.de
-   Danny Garside dannygarside@outlook.com
-   Samantha Bowen sam@bbowen.net
-   simonmcnair 101189766+simonmcnair@users.noreply.github.com
-   huanghaojun jasen.huang@ugreen.com
-   Enduriel endur1el@protonmail.com
-   Markus Gerstel markus.gerstel@osirium.com
-   simwai 16225108+simwai@users.noreply.github.com
-   Ben Alex ben.alex@acegi.com.au
-   Klaas Freitag opensource@freisturz.de klaas.freitag@kiteworks.com
-   Andrew Kreimer algonell@gmail.com
-   Ed Craig-Wood 138211970+edc-w@users.noreply.github.com
-   Christian Richter crichter@owncloud.com
    1058116+dragonchaser@users.noreply.github.com
-   Ralf Haferkamp r.haferkamp@opencloud.eu
-   Jugal Kishore me@devjugal.com
-   Tho Neyugn nguyentruongtho@users.noreply.github.com
-   Ben Boeckel mathstuf@users.noreply.github.com
-   Clément Wehrung cwehrung@nurves.com
-   Jeff Geerling geerlingguy@mac.com
-   Germán Casares german.casares.march+github@gmail.com
-   fhuber florian.huber@noris.de
-   wbulot wbulot@hotmail.com
-   Jeremy Daer jeremydaer@gmail.com
-   Oleksiy Stashok ostashok@tesla.com
-   PrathameshLakawade prathameshlakawade@gmail.com
-   Nathanael Demacon 7271496+quantumsheep@users.noreply.github.com
-   ahxxm ahxxm@users.noreply.github.com
-   Flora Thiebaut johann.thiebaut@gmail.com
-   kingston125 support@filelu.com kingston125@github.com
-   Ser-Bul 30335009+Ser-Bul@users.noreply.github.com
-   jinjingroad jinjingroad@sina.com
-   necaran 55765083+necaran@users.noreply.github.com
-   Marvin Rösch marvinroesch99@gmail.com
-   curlwget curlwget@icloud.com
-   $@M@RTH_ 165886349+Samarth1015@users.noreply.github.com
-   Ali Zein Yousuf azy5030@gmail.com
-   Davide Bizzarri davide.bizzarri@willhaben.at
-   Ross Smith II ross@smithii.com
-   Vikas Bhansali 64532198+vibhansa-msft@users.noreply.github.com
-   Sudipto Baral sudiptobaral.me@gmail.com
-   Sam Pegg samrpegg@gmail.com
    70067376+S-Pegg1@users.noreply.github.com
-   liubingrun liubr1@chinatelecom.cn
-   Albin Parou fumesover@gmail.com
-   n4n5 56606507+Its-Just-Nans@users.noreply.github.com
-   Florent Vennetier florent.vennetier@ovhcloud.com
-   houance 45840516+houance@users.noreply.github.com
-   Yu Xin 3188+is@users.noreply.github.com
-   Antonin Goude antonin.goude@ovhcloud.com
-   Timothy Jacobs timothy@ironbounddesigns.com
-   praveen-solanki-oracle praveen.solanki@oracle.com
-   huangnauh huanglibo2010@gmail.com
-   Lucas Bremgartner breml@users.noreply.github.com
-   Binbin Qian qianbinbin@hotmail.com
-   cui 523516579@qq.com
-   Tilman Vogel tilman.vogel@web.de
-   skbeh 60107333+skbeh@users.noreply.github.com
-   Claudius Ellsel claudius.ellsel@live.de
-   Motte 37443982+dmotte@users.noreply.github.com
-   dougal dougal.craigwood@gmail.com
    147946567+roucc@users.noreply.github.com
-   anon-pradip pradipsubedi360@gmail.com
-   Robin Rolf imer@imer.cc
-   Jean-Christophe Cura jcaspes@gmail.com
-   russcoss russcoss@outlook.com
-   Matt LaPaglia mlapaglia@gmail.com
-   Youfu Zhang 1315097+zhangyoufu@users.noreply.github.com
-   juejinyuxitu juejinyuxitu@outlook.com
-   iTrooz hey@itrooz.fr
-   Microscotch github.com@microscotch.net
-   Andrew Ruthven andrew@etc.gen.nz
-   spiffytech git@spiffy.tech
-   Dulani Woods Dulani@gmail.com
-   Marco Ferretti mferretti93@gmail.com
-   hunshcn hunsh.cn@gmail.com
-   vastonus vastonus@outlook.com
-   Oleksandr Redko oleksandr.red+github@gmail.com
-   reddaisyy reddaisy@outlook.jp
-   viocha viocha@qq.com
-   Aneesh Agrawal aneesh@anthropic.com
-   divinity76 hans@loltek.net
-   Andrew Gunnerson accounts+github@chiller3.com
-   Lakshmi-Surekha Lakshmi.Kovvuri@ibm.com
-   dulanting dulanting@outlook.jp
-   Adam Dinwoodie me-and@users.noreply.github.com
-   Lukas Krejci metlos@users.noreply.github.com
-   Riaz Arbi riazarbi@users.noreply.github.com
-   Fawzib Rojas fawzib.rojas@gmail.com
-   fries1234 fries1234@protonmail.com
-   Joseph Brownlee 39440458+JellyJoe198@users.noreply.github.com
-   Ted Robertson 10043369+tredondo@users.noreply.github.com
-   SublimePeace 184005903+SublimePeace@users.noreply.github.com
-   Copilot 198982749+Copilot@users.noreply.github.com
-   Alex 64072843+A1ex3@users.noreply.github.com
-   n4n5 its.just.n4n5@gmail.com
-   aliaj1 ali19961@gmail.com
-   Sean Turner 30396892+seanturner026@users.noreply.github.com
-   jijamik 30904953+jijamik@users.noreply.github.com
-   Dominik Sander git@dsander.de
-   Nikolay Kiryanov nikolay@kiryanov.ru
-   Diana 5275194+DianaNites@users.noreply.github.com
-   Duncan Smart duncan.smart@gmail.com
-   vicerace vicerace@sohu.com
-   Cliff Frey cliff@openai.com
-   Vladislav Tropnikov vtr.name@gmail.com
-   Leo i@hardrain980.com
-   Johannes Rothe mail@johannes-rothe.de
-   Tingsong Xu tingsong.xu@rightcapital.com
-   Jonas Tingeborn 134889+jojje@users.noreply.github.com
-   jhasse-shade jacob@shade.inc
-   vyv03354 VYV03354@nifty.ne.jp
-   masrlinu masrlinu@users.noreply.github.com
    5259918+masrlinu@users.noreply.github.com
-   vupn0712 126212736+vupn0712@users.noreply.github.com
-   darkdragon-001 darkdragon-001@users.noreply.github.com
-   sys6101 csvmen@gmail.com
-   Nicolas Dessart nds@outsight.tech
-   Qingwei Li 332664203@qq.com
-   yy yhymmt37@gmail.com
-   Marc-Philip marc-philip.werner@sap.com
-   Mikel Olasagasti Uranga mikel@olasagasti.info
-   Nick Owens mischief@offblast.org
-   hyusap paulayush@gmail.com
-   jzunigax2 125698953+jzunigax2@users.noreply.github.com
-   lullius lullius@users.noreply.github.com
-   StarHack StarHack@users.noreply.github.com
-   Leon Brocard acme@astray.com
-   Cohinem 143964778+Cohinem@users.noreply.github.com
-   Jack Kelly jack@OpenClimateFix.org
-   Prakhar Chhalotre chhalotreprakhar00@gmail.com
-   Varun Chawla 34209028+veeceey@users.noreply.github.com
-   Jan-Philipp Reßler 75355263+TabError@users.noreply.github.com
-   Shlomi Avihou shlomi@zadarastorage.com
-   Chris 238498929+chris081519-crypto@users.noreply.github.com
-   Jan-Philipp Reßler xodarap@xodarap.de
-   Dark Dragon darkdragon-001@web.de
-   Leon Brocard lbrocard@fastly.com
-   a1pcm a1pcm@users.noreply.github.com
-   FTCHD 144691102+FTCHD@users.noreply.github.com
-   Bjoern Franke bjo+git@schafweide.org
-   hxnd callmehxnd@outlook.de
-   Adam Kasztenny adamkasztenny@gmail.com
-   Romāns Potašovs justgook@gmail.com
-   Brian Bockelman bbockelman@morgridge.org
-   Bjoern Franke bjo@schafweide.org
-   razorloves razorloves@gmail.com
-   Duncan F 131309315+duncanaf@users.noreply.github.com
-   Billy Hughes w.g.h.hughes@gmail.com
-   Bhagyashreek8 57988406+Bhagyashreek8@users.noreply.github.com
-   Andriy Senyshyn 135705861+sam-mt@users.noreply.github.com
-   Andrew Furman 7343697+furmandev@users.noreply.github.com
-   ZRHan 56144550+ZRHann@users.noreply.github.com
-   Jason jasonbabo@gmail.com
-   Patrick Farrell pfarrell@whamcloud.com
-   BizaNator 17164422+BizaNator@users.noreply.github.com
-   lif 1835304752@qq.com
-   jinkeyuu 44105232+jinkeyuu@users.noreply.github.com
-   jinyu.han jinyu.han@ucloud.cn
-   Claude Opus 4.6 noreply@anthropic.com
-   Andriy Senyshyn andriy.senyshyn@kiteworks.com
-   Mike GIllan mike.gillan@gmail.com
-   Xiangzhe xiangzhedev@gmail.com
-   Suyun suyun@aosc.io
-   TheBabu ariq.haqq@gmail.com
-   Brais Couce braiscouce@gmail.com
-   Mozi 29089388+pzhlkj6612@users.noreply.github.com
-   SyoBoN syobon@syobon.net
-   Jan Heylen heyleke@gmail.com
-   tdawe 90407556+tdawe1@users.noreply.github.com
-   Anton Bordwine 54022438+antonchuvashow@users.noreply.github.com
-   mathieulongtin 617359+mathieulongtin@users.noreply.github.com
-   Luke Cyca me@lukecyca.com
-   dlaumen 262192488+dlaumen@users.noreply.github.com
-   Yakov Till 37628546+Lyapsus@users.noreply.github.com
-   Chris Coughlan chris@coughlan.io
-   John Volk volkjohn@users.noreply.github.com

Contact the rclone project

Forum

Forum for questions and general discussion:

-   https://forum.rclone.org

Business support

For business support or sponsorship enquiries please see:

-   https://rclone.com/
-   sponsorship@rclone.com

GitHub repository

The project's repository is located at:

-   https://github.com/rclone/rclone

There you can file bug reports or contribute with pull requests.

Twitter

You can also follow Nick on twitter for rclone announcements:

-   @njcw

Email

Or if all else fails or you want to ask something private or
confidential

-   info@rclone.com

Please don't email requests for help to this address - those are better
directed to the forum unless you'd like to sign up for business support.
